Role Climate17 are working alongside well-established, UK-based, asset management firm who specialise in the entire project lifecycle, from origination through to operations of renewable energy and power gen assets. The BESS Field Service Engineer will perform planned and preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. Responsibilities Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance worksPerform system software and firmware upgradesMonitor operation performance monitoring and data assessmentProvide phone support and remote diagnostics to customersTroubleshoot equipment located at BESS sitesManage spare partsResponsible for safety work complying with local safety regulations and safety standardsConduct risk assessment and implement safety measuresKeep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service tripsAssist the in-house system engineering group in product development and/or project workProvide suggestions based on field experience, to improve the products Requirements: Qualification in an electrical/ electro-mechanical disciplineECS Gold Card - EssentialPrevious electrical or multi skilled maintenance experienceBasic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)Qualification of working on Site safelyThis role involves travelling to different sites. Overnight stay or international travel may be requiredWorking experience with BESS - preferredWorking knowledge of HV/LV power electronics including inverters / converters / Transformers - preferredPrevious HVAC training and F-Gas qualification - preferredStrong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols - preferredC&G2391-5 Test & Inspect or equivalent - preferredFamiliar with BS7671 - preferredHV authorised person - preferred Location: Field based, Sheffield region (within 1 hour of) About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know.....Read more...
DevOps Engineer - FinTech - Newcastle
(Tech stack: DevOps Engineer, Azure, Kubernetes, SQL Server, Snowflake, Jira, Bitbucket, Git, CI/CD, DevOps Engineer, Urgent)
I’m recruiting on behalf of a leading FinTech company in Newcastle that is looking for a talented DevOps Engineer to join their growing team. This is a fantastic opportunity to work in a fast-paced, technology-driven environment where you’ll play a key role in enhancing automation, infrastructure, and deployment processes.
Key Responsibilities:
As a DevOps Engineer, you’ll be responsible for maintaining and improving the company’s infrastructure, automating deployment pipelines, and ensuring seamless operations across development and production environments. Your role will involve:
Writing and maintaining scripts using PowerShell or other scripting languages.
Developing with C#, Java, or Python, with either prior software development experience or the ability to code when needed.
Implementing Infrastructure as Code (IaC) using tools like Ansible, Terraform, or equivalent.
Managing containerization with Docker and orchestration using Kubernetes or Docker Swarm.
Setting up and maintaining monitoring solutions such as ELK, Grafana, or similar.
Managing CI/CD pipelines with TeamCity.
Working with Microsoft SQL Server to ensure optimal database performance.
Administering both Windows and Linux environments.
Communicating clearly and professionally with both clients and internal teams.
What They’re Looking For:
Strong scripting skills with PowerShell or another scripting language.
Hands-on experience with at least one programming language: C#, Java, or Python.
Proven expertise in Infrastructure as Code using Ansible, Terraform, or similar tools.
Solid experience with containerization (Docker) and orchestration (Kubernetes or Docker Swarm).
Knowledge of monitoring tools such as ELK Stack, Grafana, or equivalent.
Experience with CI/CD pipelines, particularly using TeamCity.
Familiarity with Microsoft SQL Server.
Experience administering both Windows and Linux systems.
Strong communication skills, with the ability to engage professionally with both technical teams and clients.
Financial Services experience is beneficial but not essential.
A 2:1 or higher degree in Computer Science or a related field, ideally from a top-tier university.
Preferred Experience (Nice to Have):
Knowledge of Atlassian tools such as Bitbucket and JIRA.
Experience with artifact storage solutions like Artifactory.
Familiarity with Octopus Deploy.
Understanding of static analysis tools such as SonarQube.
Experience using Control-M for workload automation.
Exposure to cloud platforms (Azure, AWS, or GCP).
Experience working with VMware (vSphere) and SAN storage solutions.
Why Join?
This is a fantastic opportunity to work in an innovative FinTech company, where you’ll be empowered to bring new ideas, improve infrastructure, and drive automation. You’ll work with a talented team, using cutting-edge technologies to deliver high-impact solutions.
Location: Newcastle, UK
Salary: Competitive + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
To apply for this position please send your CV to Matt Jones at Noir.
NOIRUKTECHREC
NOIRUKREC
NC/RG/DV....Read more...
Data Engineer - Non-Profit / Health Charity - Cambridge
(Tech Stack: Data Engineer, Python, Azure, Power BI, AWS QuickSight, AWS, TSQL, ETL, Agile Methodologies)
A leading health charity based in Cambridge is seeking a talented and driven Lead Data Engineer to join their team. This is a fantastic opportunity to take on a strategic role within an organisation making a real difference in public health. The role is offered on a hybrid basis, with a mix of home and office-based working.
Key Responsibilities:
Apply comprehensive experience with IaaS services, including Microsoft Azure and AWS, to design and deliver robust, scalable data solutions.
Lead the development of databases and manage CI/CD pipelines to support efficient and reliable deployments.
Work with Azure Synapse and Azure Data Factory to develop and maintain data integration and transformation processes.
Champion best practices around continuous integration and deployment.
Manage and optimise the use of Azure cloud services across the organisation.
Use version control tools such as Git and GitHub to ensure collaborative, well-documented code development.
Demonstrate in-depth knowledge of relational and geospatial databases including MySQL, T-SQL, PostGIS, and PostgreSQL.
Write and maintain scripts in PowerShell, Bash, R, and Python to automate data workflows and support analysis.
Oversee multiple technical projects, ensuring timely delivery and alignment with organisational goals.
Inspire, mentor and guide a small, busy team of data engineers, creating a collaborative and high-performing environment.
What We’re Looking For:
A proven background in data engineering, with experience managing complex technical projects.
Strong leadership skills and the ability to effectively motivate and support a technical team.
Excellent communication skills, capable of working with both technical and non-technical stakeholders.
A passion for data and a commitment to using it to drive meaningful, real-world impact.
A relevant degree in Computer Science, Engineering, or a related field (or equivalent experience).
What’s on Offer:
A competitive salary, dependent on experience.
A flexible hybrid working arrangement with regular time spent at the Cambridge office.
A generous benefits package including pension contributions, health-related perks, and wellbeing support.
The chance to work for a respected non-profit, contributing to projects that improve public health outcomes.
Location: Cambridge, UK
Salary: £50,000 - £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote work is available.
To apply for this position please send your CV to Matt Jones at Noir.
NOIRUKTECHREC
NOIRUKREC
NC/RG/DE....Read more...
Embedded Software Engineer – Security Clearance – Cambridge
A growing spinout security technology company, based in Cambridge, is currently seeking an experienced Embedded Software Engineer to assist with the development, modification, and enhancement of various security technologies.
Your focus will span across radio, satellite, communications, radar, sensors, and other complex technologies used in the defence, aerospace, telecommunications, and other cutting-edge sectors, where you will contribute to the development of new technologies.
You will collaborate with a team of experts, including electronics design engineers, software engineers, mechanical engineers, physicists, and other specialists. You won't necessarily need prior experience in the specific sector, as this is trainable, but you should have substantial experience in developing embedded systems using C/C++ programming languages.
This company provides bespoke products and services for clients, ensuring that your projects will always be unique, presenting their own set of problems and challenges to keep you engaged. In addition to client projects, you will be involved in developing new versions of existing technology and improving current versions, offering a diverse and engaging role that will keep you interested for the long term.
While experience in telecommunications, aerospace, scientific, radar, radio, or other complex technologies that involve communication between devices would be ideal, it is not essential. Your experience as an Embedded Software Engineer is more crucial than the specific sector.
Certain roles may require security clearance, typically necessitating a British passport with no criminal record or a history of residing in the UK and paying taxes for several years (also with no criminal record).
This role has arisen due to the company's growth. They take pride in investing in their staff by providing continuous training to support your career development. They have received awards for their commitment to staff development.
In addition to award-winning training, career growth, and varied and unique work, you will receive a competitive starting salary, bonuses, pension contributions, medical insurance, life assurance, free parking, and other excellent benefits.
There are currently several openings for Embedded Software Engineers within the company, so they will consider candidates with different levels of experience, from those early in their careers to senior candidates with years of experience.
Salary will be determined based on experience, and there may be new roles approved in the future. If you are interested, we recommend submitting your application now to avoid missing out.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
We are looking for an experienced Senior Machine Learning Engineer to join one of our client's team.
Skills and Qualifications:
Bachelor’s or Master’s degree in Computer Science, Data Science, or a related field.
Advanced Python and machine learning frameworks (Keras, SciPy, Scikit-learn, TensorFlow, PyTorch, Spark MLlib ...) knowledge.
Hands-on experience with one or more cloud computing platforms (Azure - preferred, AWS, GCP).
Strong understanding of the whole ML lifecycle and experience with MLOps/DataOps.
Experience with data processing frameworks like Apache Spark or similar.
Proficiency in SQL, RDBMS/NoSQL data stores and appropriate use cases.
Experience with version control, small and regular commits, unit tests, CI/CD, packaging, familiarity with containerization tools such as Docker and Kubernetes.
Proven experience in GPU cluster development and management is a plus.
Experience with orchestrated LLM applications is a plus.
Strong problem-solving skills and attention to detail.
Good communication skills, fluent English.
If interested, please get in touch via contact details provided or click “Apply” to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
Looking to build software that powers real-world security systems? Join a forward-thinking team developing next-generation radar technology used in over 35 countries for border surveillance, perimeter protection, and critical infrastructure security.
Youll work on everything from embedded radar software to advanced control interfaces, developing new capabilities, improving user experiences, and integrating with third-party surveillance platforms. This is a great opportunity for a curious and capable software engineer ready to take on exciting technical challenges in a multidisciplinary environment.
What Youll Be Doing:
- Design and develop software across a range of radar systems and interfaces
- Build integrations with third-party surveillance and security platforms
- Enhance system usability and improve user experiences
- Help evolve the teams engineering practices and techniques
What Were Looking For:
- 2+ years experience in software development
- Strong understanding of object-oriented programming
- Excellent communication and teamwork skills
- Problem-solver with a creative, analytical mindset
- Comfortable engaging with end users and stakeholders
Itd Be Great If You Also Have Some Of The Following:
- Degree in software, engineering, or a software-focused science field
- C++, Python, or similar programming languages
- Experience with SQL databases, GIS data, or UI/UX best practices
- Familiarity with real-time systems, embedded Linux, or machine learning
- Background in security/defence or command & control software
- Willingness to travel for occasional project work (UK & international)
If you're ready to make a direct impact on cutting-edge surveillance technologies and work alongside a team of expert engineers, wed love to hear from you. Apply today!
....Read more...
FPGA Firmware Electronics Engineer – Defence – Cambridge
We are currently seeking an experience Electronics Engineer to join a multidisciplinary team of engineers that assist in the development of brand-new technologies for the Defence sector, with a focus on defence rather than offence.
These technologies can encompass communications, sensors, detection, and other complex technologies within the Defence sector. As you will be working on defence projects, you will need to be able to obtain (or already hold) security clearance.
As a smaller defence company, there is more flexibility in the projects you get to work on. Collaboration with other teams and external groups mean that you will have the opportunity to develop your skills and continuously learn new things while inventing exciting technologies.
Experience with FPGA Firmware, such as VHDL or Verilog, will be ideal. If you already work in the Defence sector, this would be advantageous, however, we are more than happy to consider candidates from other sectors.
With the growth of this company, future career development will be available for those who want to advance their career. As the company are looking for a few people in this team, we are also open to individuals who want to focus on their job while maintaining an interest in new technologies and fields.
It is expected that you would hold a degree in an electronics engineering field that has led you into a career in electronics engineering, with exposure to FPGA exposure.
Due to the varied nature in this role, I anticipate a lot of interest from individuals who want to continue developing their skills while finding the work interesting. If you are interested in this role, I suggest submitting an application now or avoid missing out.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonuses, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now or avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Assist in servicing, repairing and maintaining a range of industrial cleaning machines.
Learn to diagnose electrical and mechanical faults on industrial cleaning machines.
Follow health & safety procedures to maintain a safe working environment.
Participate in on-the-job training and attend college as part of the apprenticeship programme.
Assist with Hub organisation and stock management.
Ensure all preparation/repair/refurbishment jobs are completed to set quality standards and to defined criteria per machine ‘job family’ and to time.
Test machines in line with company guidelines before delivery to customer to ensure quality criteria has been achieved.
Refurbish machines to set quality standards and guidelines including cosmetic repairs and valeting.
Perform fault diagnostics on smaller machines and process all machines requiring repair to more senior engineers in the hubs for completion.
Fully prepare, inspect and valet all small equipment (not requiring repair) ready for dispatch to customers and in line with quality standards.
Ensure that all machines and ancillaries are PA tested and correctly labelled before delivery to customer.
Training:One day a week at Warrington & Vale Royal College (Winsford site).Training Outcome:Role progression to Field Service Engineer Roles, Hub Team Leader, Technical Services Engineer.Employer Description:ICE is the UK’s largest independent provider of cleaning equipment. We manage thousands of sites across the UK in a wide variety of sectors including retail, healthcare, warehousing, manufacturing, distribution and education. As well as supplying and servicing traditional cleaning equipment, we also have over a decade of experience in robotic floor cleaning machines. The successful apprentice will diagnose faults and carry our repairs, ensuring our fleet of machines and robot are at peak efficiency. This is an excellent opportunity to develop hands on mechanical and electrical engineering skills whilst working towards a recognised apprenticeship qualification.Working Hours :Monday - Friday, 8.00am - 5.00pm, with a 60 minute unpaid lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Basic understanding of tools.,A willingness to learn,Willingness to develop skills,A good team player,Positive attitude....Read more...
Refrigeration & Air Conditioning Engineer Basic £40,000 - £45,000 / 40hr working week / Overtime / On-call 1 in 5 / 21 + 8 Days Holiday / Van with private use / Sick pay / Pension Founded in 1980, we specialise in Catering, Heating & Refrigeration for commercial businesses such as Hotels, Restaurants, Retail, Care Homes, Education and Government buildings throughout the South. Due to company growth and success of new contracts, we are now seeking new and experienced engineers to join our team! Key Responsibilities:
Service, maintenance and repair of all commercial refrigeration equipment: ice machines, display fridges, coldrooms, blast chillers, bottle coolers
Working on VRVS, VRFS and Splits
Field based meeting clients - Customer facing position
Essential Qualifications / Experience:
FGAS or Equivalent
Minimum 12 months recent experience working on Refrigeration or air conditioning Equipment
Driver’s Licence
Benefits:
Basic Salary: £40,000 to £45,000
40hr working week
Door to door pay
On call rota 1 in 5 £120 standby payment
Overtime paid at 1.5 Monday – Saturday and x2 Sundays and Bank Holidays
21 days (25 days after 3 years’ service) + 8 Bank Holidays
Private Pension
Sick Pay after 6 months
Van + Fuel Card
Van can be used for personal use
Tools and uniform
Smart phone and tablet
Training provided and funded when needed
....Read more...
.cs2654AE3A{text-align:left;text-indent:0pt;margin:0pt 0pt 0pt 0pt}
.csD9AE63C1{color:#000000;background-color:transparent;font-family:Arial;font-size:10pt;font-weight:normal;font-style:normal;text-decoration: underline;}
.cs1BA52A26{color:#000000;background-color:transparent;font-family:Arial;font-size:10pt;font-weight:bold;font-style:normal;}
.csC8F6D76{color:#000000;background-color:transparent;font-family:Calibri;font-size:11pt;font-weight:normal;font-style:normal;}
.cs4306042E{color:#000000;background-color:transparent;font-family:Calibri;font-size:11pt;font-weight:bold;font-style:normal;}
.cs15B7AE4B{text-align:left;margin:0pt 0pt 0pt 0pt;list-style-type:disc;color:#000000;background-color:transparent;font-family:Arial;font-size:11pt;font-weight:normal;font-style:normal}
.cs26DADAAD{color:#000000;background-color:transparent;font-family:Calibri;font-size:11pt;font-weight:normal;font-style:normal;text-decoration: none;}
.csCCA9035D{color:#0000FF;background-color:transparent;font-family:Calibri;font-size:11pt;font-weight:normal;font-style:normal;text-decoration: underline;}
Job Title: Field Services EngineerBased at: Worthing /SussexPackage:Starting £28,000 to £31,250 plus company car and mobile phone Job Summary Reporting directly to our Service Manager, the Field Services Engineer will join the Customer Operations Team as part of a team focused on delivering onsite technical resource for my clients educational institutions. You will be assigned a portfolio of approximately 15 schools and scheduled to visit 3 schools a day where you will provide both proactive and reactive technical support and consultancy. As the primary point of contact between the school and my client you will be expected to build strong relationships with the school Bursars and Heads. Being part of the Customer Operations Team, you will be periodically redeployed back at the clients main office to assist our remote support team. While we will expect you to be able to work autonomously, you will be part of a team of roughly 15 Field Engineers and 4 Remote Technicians. Utilising unified communications, you will always have the ability to collaborate with your peers on issues ensuring the best grade of service to our valued customers. Technical Skills
Network Troubleshooting (Hardware & Topology, TCP/IP)Understanding of Client/Server ApplicationsDesktop OS Installations & configurationHardware troubleshooting
Excellent understanding of desktop environments, including support for Microsoft Windows and Google Chrome OSMicrosoft Office 2013 to 365 (especially Outlook)Administration of Windows Server 2016 (especially Active Directory and Group Policy)Configuring and installing routers & firewallsExposure to ESS-SIMS beneficial
Attitude
Mature and professional attitude towards working in a sensitive educational environmentAbility to work both within a team and be self-motivated Logical approach to challengesAble to manage multiple tasks effectively and deliver within specified time framesHighly technical but customer focusedMust be presentable and personable
Due to the nature of this role the successful applicant will need a full UK driver’s license will be required complete a DBS check. To apply for this role or for more information and an initial telephone interview please send your CV to soniab@justit.co.uk or contact me directly 0207 426 9844
....Read more...
Senior Mechanical Engineer – Biotech Mechatronics – Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD. Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows. Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it’s like to wear multiple hats when needed. Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives. I can provide more details once you have made an application. Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I’m expecting a lot of interest in the role. So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you.....Read more...
Water Treatment Engineer - FM Service Provider - Reading, London & South East - Up to £35,000 per annum Do you have Water Treatment / Plumbing experience? Do you have building maintenance experience? If the answer is yes, then read on... An exciting opportunity to work for an established FM Service provider situated in the South East has arisen! CBW are currently recruiting for a Water Treatment Engineer to look after a number of sites across Reading, London and the South East across a range of contracts. The successful candidate will have a proven track record in water treatment with a minimum of 1 year of experience in the water treatment field. Water treatment qualifications are desired but not essential. This is a great opportunity for a candidate with minimal experience looking to expand their knowledge and qualifications. Key ResponsibilitiesDaily, weekly and monthly analytical testing of cooling towers and closed systems.Chilled Water systemsWater flushingDisinfecting mains water pipes and hot & cold water systems when the need arisesWorking with chemicals such as chemical dosingSurveys on hot and cold water systemsCarry out general building maintenanceKnowledge of the following; Calorifiers, Cooling Towers - Disinfection, Circulation pumps, Temp tests, Tank Cleans, Chlorination, Water softeners, Cold water storage tanks, Dip SlidesPackageSalary of up to £35,000Company Van & Fuel Card - Private use optionalPension Scheme24 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salary24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts Cycle to work scheme Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesHours of workMonday to Friday - 08:00 am to 16:30 pm - 30 minute lunch breakRequirementsCity and Guilds in Plumbing - DesirableCity and Guilds in Water Treatment - DesirableCity and Guilds Legionella control within hot and cold water systems - DesirableDemonstrate previous experience in water system remediation/maintenance worksDemonstrate working knowledge of the respective legislation and guidance materialFully trained and knowledgeable on the ACOP L8 regulationsPlease send your CV to Archie Reed at CBW Staffing Solutions for more information. ....Read more...
Water Treatment Engineer - FM Service Provider - West London/Slough - Up to £34,100 per annum Do you have Water Treatment / Plumbing experience? Do you have building maintenance experience? If the answer is yes, then read on... An exciting opportunity to work for an established FM Service provider situated in London has arisen! CBW are currently recruiting for a Water Treatment Engineer to look after a number of sites in and around Slough, Twickenham, Uxbridge, Reading and Harrow across a range of contracts. The successful candidate will have a proven track record in water treatment or have experience in a relevant field. Water treatment qualifications are desired but not essential. This is a great opportunity for a candidate with minimal experience looking to expand their knowledge and qualifications. Key ResponsibilitiesDaily, weekly and monthly analytical testing of cooling towers and closed systems.Chilled Water systemsWater flushingDisinfecting mains water pipes and hot & cold water systems when the need arisesWorking with chemicals such as chemical dosingSurveys on hot and cold water systemsCarry out general building maintenanceKnowledge of the following; Calorifiers, Cooling Towers - Disinfection, Circulation pumps, Temp tests, Tank Cleans, Chlorination, Water softeners, Cold water storage tanks, Dip SlidesPackageSalary of up to £34,100Company Van & Fuel Card - Private use optionalPension Scheme25 days annual leave (+ public holidays)Life Cover equivalent to 1 times annual salary24/7 Employee Assistance Program and access to mental wellbeing appEmployee discount shopping schemes on major brands and retailersGym membership discounts Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmesHours of workMonday to Friday - 08:00 am to 17:00 pm 40 Hours per week RequirementsCity and Guilds in Plumbing - DesirableCity and Guilds in Water Treatment - DesirableCity and Guilds Legionella control within hot and cold water systems - DesirableDemonstrate previous experience in water system remediation/maintenance worksDemonstrate working knowledge of the respective legislation and guidance materialFully trained and knowledgeable on the ACOP L8 regulationsPlease send your CV to Charlie Long at CBW Staffing Solutions for more information. ....Read more...
Our partner are growing their national team of Marine Electronics Technicians and Engineers. Whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Right to Work: Applicants must have the legal right to work in the UK. Sponsorship is not currently available.
Equal Opportunities: We welcome applications from all suitably qualified candidates.
Apply now and be part of the future of marine electronics.....Read more...
Are you an experienced Software Engineer with a passion for innovation and real-world impact? Join a growing engineering team working on world-class ground surveillance technologies used in over 35 countries. This is an opportunity to help shape the software behind advanced radar systems that protect borders, monitor perimeters, and secure critical infrastructure.
Youll work across a full software stack, from embedded radar processing to user-facing control systems, helping integrate cutting-edge technology with third-party surveillance platforms and enhancing the user experience. If you're creative, collaborative, and excited about pushing the limits of software engineering, we want to hear from you.
What Youll Be Doing
- Design and develop software for radar systems and external interfaces
- Improve system integration with third-party surveillance and security platforms
- Enhance UI/UX for end-users and develop intuitive control systems
- Contribute to continuous improvement of software engineering practices
What Were Looking For
- 5+ years of software development experience
- Solid background in object-oriented software design
- Strong problem-solving and communication skills
- A collaborative mindset and experience working in cross-functional teams
Itd Be Great If You Also Have Some Of The Following:
- A degree in software, engineering, or a related technical field
- Experience with C++, Python, or other scripting languages
- Knowledge of SQL databases and GIS data manipulation
- Experience with UI/UX best practices
- Familiarity with embedded Linux or real-time systems
- Background in security/defence command & control systems
- Exposure to machine learning or statistical analysis
Additional Info
- Occasional project-related travel may be required (UK & international)
- Driving licence and passport required
Ready to make a real impact on global security technology? Apply now and join a team thats defining the future of surveillance systems.....Read more...
An apprentice will be joining a team of two engineers out on the road every day. A working week could include:
Diagnosing faults on dispensing pumps
Servicing mechanical electrical dispensers
Pressure testing underground fuel tanks
Testing Vapour recovery systems
Digging out ground works, forming islands and repairing concrete
Working with threaded steel pipework or UPP fusion welded pipework
Installing new dispensers
Attending local authority weights and measure checks
Training:MOET - Maintenance Operations Engineer Technician level 3. Training to take place one day per week in college, with the rest of the working week spent out on site learning the job.Training Outcome:Qualified and experienced it is hoped the apprentice will have a vital role in the future of the business.Employer Description:Established in 1994, we have three decades of experience in the petroleum industry. We pride ourselves on pairing great customer service with in-depth knowledge in our field. We work closely with the local petroleum authorities in Norfolk, Suffolk, Lincs and Essex and have long standing relationships with clients covering the entire East of England.Working Hours :Working week usually Monday - Friday 9am - 5pm, but occasional earlier starts and later finishes when working further afield.Skills: Communication skills,Attention to detail,Problem solving skills,Logical,Team working,Physical fitness,Prior experience with tools,Able to name basic tools,Demonstrate use of tools,Able to follow instructions,Honest,Transparent in tasks,Intuitive,Mechanical interest....Read more...
Position: Module Integration Design Engineer
Job ID: 3423/2
Location: Segensworth, Hampshire
Rate/Salary: £65,000
Benefits:
• Private Medical
• Life Insurance
• Company Pension
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Module Integration Design Engineer
Typically, this person will work closely with a multi-disciplinary team to develop and integrate modular payloads onto advanced maritime platforms. You will play a key role in designing high-performance solutions for modular marine craft used in defence and commercial operations. This is a fantastic opportunity for someone passionate about mechanical design and modular system integration.
HSB Technical’s client is an established and highly regarded MOD specialist, recognised for delivering high-performance craft for defence and specialist maritime applications. With a growing order book and an expanding product range, they are building a dedicated module integration team to support scalable, multi-role vessel systems.
While marine design experience is highly desirable, the company is also open to applicants from other engineering sectors such as automotive or aerospace, especially where experience includes systems integration, complex assembly design, or lightweight structural work.
Duties and responsibilities of the Module Integration Design Engineer:
• Perform Space, Weight and Power (Electrical) – SWAP(E) assessments for integration of diverse payload modules
• Develop 3D CAD concepts and detailed models using Siemens NX
• Generate manufacturing and assembly drawings for both prototype and production builds
• Design components and interfaces using appropriate materials (metals and composites), ensuring system-level integration
• Produce high-quality concept renderings and visuals for customer and marketing use
• Participate in design and integration workshops with both internal stakeholders and external payload suppliers
• Collaborate with multidisciplinary teams including systems, electrical and control engineering to achieve functional solutions
Qualifications and requirements for the Module Integration Design Engineer:
Essential:
• Degree or equivalent experience in Mechanical Engineering, Product Design, or similar field
• Proficiency with 3D parametric CAD (preferably Siemens NX)
• Understanding of structural design principles and SWAP(E) analysis
• Experience designing with metallic and composite materials
• Good time management and the ability to deliver to tight deadlines
• Effective communicator and team player
Desirable:
• Background in marine design or naval/military engineering
• Familiarity with rendering tools, VR environments, or immersive model interrogation
• Experience in automotive or aerospace engineering design
• Competence with 3D printing and design for additive manufacturing
• FEA experience in composites or metals
Key Behaviours:
• Organised and able to independently manage tasks and timelines
• Clear communicator with the ability to convey technical ideas effectively
• Collaborates well in multi-disciplinary teams
• Proactive problem-solver
• High standard of attention to detail
• Maintains professional conduct and respects confidentiality
General Accountabilities and Responsibilities:
• Apply initiative and practical thinking to overcome design challenges
• Maintain fluency in engineering and design software systems
• Act with integrity and align with the organisation’s values
• Support team members and business objectives with a positive mindset
• Complete any additional duties required by senior management
• Maximise productivity through effective time management
Health & Safety Responsibilities:
• Ensure the working environment is clean, safe, and compliant with company policies
• Operate tools and equipment responsibly and ensure safety devices are in place
• Follow all Health & Safety procedures for personal and team safety
• Immediately report potential hazards to management or the QHSE team
• Maintain and use PPE correctly and report wear or damage as needed
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Commercial Catering Engineer Basic £40,000 - £45,000 / 40hr working week / Overtime / On-call 1 in 5 / 29 Days Hol / Van Founded in 1980, we specialise in Catering, Heating & Air-conditioning for commercial businesses such as Hotels, Restaurants, Retail, Care Homes, Education and Government buildings throughout the South. Due to company growth and success of new contracts, we are now seeking new and experienced engineers to join our team! Key Responsibilities:
Service, maintenance and repair of all commercial catering kitchen equipment: combi ovens, fryers, ranges, griddles and more
Service and maintenance of refrigeration equipment
Fault Finding on both electrical and gas commercial catering equipment
Field based meeting clients - Customer facing position
Essential Qualifications
Catering engineering experience (gas or electrical)
FGAS Refrigeration Qualifications
Relevant electrical experience (18th edition, HNC, NVQ, City and Guilds in electrics would be an advantage)
Full Driver’s Licence
Benefits:
Basic Salary: £40,000 to £45,000
40hr working week
Door to door pay
On call rota 1 in 5 with £120 standby
Overtime paid at 1.5 Monday – Saturday and x2 Sundays and Bank Holidays
21 days (25 days after 3 years’ service) + 8 Bank Holidays
Private Pension
Sick Pay after 6 months
Van + Fuel Card
Van can be used for personal use
Tools and uniform
Smart phone and tablet
Training provided and funded when needed
If this particular vacancy is of interest to you please call #Fern @ CV Bay on 0121 389 0023 ....Read more...
Commercial Catering Engineer Basic £40,000 - £45,000 / 40hr working week / Overtime / On-call 1 in 5 / 29 Days Hol / Van Founded in 1980, we specialise in Catering, Heating & Air-conditioning for commercial businesses such as Hotels, Restaurants, Retail, Care Homes, Education and Government buildings throughout the South. Due to company growth and success of new contracts, we are now seeking new and experienced engineers to join our team! Key Responsibilities:
Service, maintenance and repair of all commercial catering kitchen equipment: combi ovens, fryers, ranges, griddles and more
Service and maintenance of refrigeration equipment
Fault Finding on both electrical and gas commercial catering equipment
Field based meeting clients - Customer facing position
Essential Qualifications
Catering engineering experience (gas or electrical)
FGAS Refrigeration Qualifications
Relevant electrical experience (18th edition, HNC, NVQ, City and Guilds in electrics would be an advantage)
Full Driver’s Licence
Benefits:
Basic Salary: £40,000 to £45,000
40hr working week
Door to door pay
On call rota 1 in 5 with £120 standby
Overtime paid at 1.5 Monday – Saturday and x2 Sundays and Bank Holidays
21 days (25 days after 3 years’ service) + 8 Bank Holidays
Private Pension
Sick Pay after 6 months
Van + Fuel Card
Van can be used for personal use
Tools and uniform
Smart phone and tablet
Training provided and funded when needed
If this particular vacancy is of interest to you please call #Fern @ CV Bay on 0121 389 0023 ....Read more...
We are looking for an experienced Senior AI/ML Engineer to join one of our client's team.
Skills and Qualifications:
Bachelor’s or Master’s degree in Computer Science, Data Science, or a related field.
Strong expertise in Python, with a focus on FastAPI, Pandas, and NumPy.
Experience with Retrieval Augmented Generation (RAG).
Proficiency in Prompt Engineering.
Knowledge of vector databases and embedding models.
Familiarity with frameworks such as LangChain, LangGraph, and LlamaIndex.
Experience with multi-agent libraries/frameworks like CrewAI, Autogen, and Taskweave.
Hands-on experience with Azure cloud services, including Azure Functions.
Familiarity with other cloud platforms and their AI services is a plus, but Azure experience is mandatory.
Understanding of data engineering concepts, including data pipelines, data integration, and data warehousing.
Ability to work with large datasets and perform data cleaning, transformation, and manipulation.
Experience with version control, small and regular commits, unit tests, CI/CD, packaging, and Docker.
.NET technology stack proficiency incl. C# is a plus.
Knowledge of AI ethics, bias mitigation, and responsible AI practices is a plus.
Strong analytical thinking and creative problem-solving skills.
Good communication skills for collaborating with cross-functional teams and stakeholders.
If interested, please get in touch via contact details provided or click “Apply” to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
Role : Refrigeration Engineer Location : West London/ South West London/ Twickenham / Kingston Benefits; Up to £45,800pa ( £22.01 )/ 40 hrs / 25 days + 8 bank holiday / Buy 5 more days holiday / door to door / sick pay / health care plan / life assurance 3x salary / Share save scheme / Hapi benefit scheme / private use of van / 1 in 12 / over time paid after 40hrs at x1.5 and x.2 The RoleWith over 45 years experience behind us, we are proud to be one of the leading commercial catering and refrigeration service providers across the UK, we are also part of an international group to enable us to be able to offer job stability and progression opportunities for our employees and a great overall package. We currently have a team of 120 service engineers across the UK working on a regional basis, working with Banks, Hospitals, Stadiums, Hotels, Schools, and Offices to name a few. We are currently seeking an experienced Refrigeration Engineer to join our team, to work across our commercial sites across West / South West London Key Responsibilities:
Service, reactive maintenance and breakdown of refrigeration equipment
Working with Cold-rooms, Bottle Coolers, Under counter fridge/freezers, Display Cabinets, Blast chillers
Conducting regular maintenance checks and identifying faults
Providing expert advice and guidance to clients
Field based meeting clients - Customer facing position
Qualifications· FGAS · Previous experience with commercial refrigeration equipment· NVQ level 2 refrigeration & air conditioning · Full UK Driving LicencePackage:
Up to £45,800
40 hour working week
Door to door
33 days holiday ( + 5 days )
Overtime; X 1.5 mon-sat and 2x sun & bank hols
Personal use of a company vehicle
HSF Healthcare Plan
Pension Scheme
Life cover (3 times Gross Salary)
Sharesave Scheme
Company Sick Pay
Long Service Awards Scheme
Hapi Benefits Scheme (theme park, restaurant, shopping and cinema discounts)
25 days + 8 bank holidays
Fuel card
Uniform
....Read more...
Assist in routine maintenance and servicing of hydroblasting and line marking vehicles
Carry out safety checks and inspections before vehicles are deployed
Help diagnose and repair mechanical, electrical, and hydraulic faults
Clean and maintain hydroblasting nozzles, pumps, and other specialist components
Support the setup and calibration of high-pressure water systems used on-site
Learn how to operate hydroblasting and line marking equipment under supervision
Travel with the team to job sites across the UK, gaining field experience
Work alongside experienced technicians to understand vehicle systems and best practices
Record maintenance activities and assist with keeping service logs up to date
Follow all health, safety, and environmental procedures while working in the workshop and on-site
Training:Training will be delivered through hands-on experience in the workplace and off-the-job training with our approved training provider.
On-the-job training will occur at our central depot, where the apprentice will work alongside experienced technicians on hydroblasting and line marking vehicles.
Off-the-job training will be delivered in block release or day release format at Hartlepool College, confirmed as part of the apprenticeship induction.
Training will typically be one day per week or in blocks every 6–8 weeks, depending on the provider’s schedule and curriculum.
All travel to off-site training will be supported and scheduled to avoid learning or operational duties disruption.Training Outcome:
Senior Technician or Workshop Supervisor rolesField Service Engineer, specialising in hydroblasting or line marking systems
HGV Operator, if you've completed your licence during the apprenticeship
Further training in diagnostics, hydraulics, or electrical systems
Opportunities to move into fleet management or engineering support roles
We actively support long-term career development and will help you grow within the business.
Employer Description:Jack Coupe & Sons Ltd is a well-established, family-run business specialising in road marking, hydroblasting, line removal, and the manufacture of line marking materials. Based in the North of England, we serve clients across the UK, delivering high-quality, safety-critical services to local authorities, contractors, and private sector clients.
With over 40 years of industry experience, we pride ourselves on our professionalism, innovation, and commitment to excellence. We invest in our people, equipment, and training to ensure we remain at the forefront of road surface technology.
As a forward-thinking employer, we offer exciting opportunities for apprentices to gain real-world experience, develop specialist skills, and build long-term careers in a supportive and dynamic environment.Working Hours :You’ll work Monday to Friday, 7:30am to 4:30pm, with a one-hour lunch break.
Some early starts, evenings, or weekends may be required when travelling to jobs.
The role is 40 hours per week, in line with apprenticeship guidelines.Skills: Communication skills,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,Flexibility....Read more...
Dive into the world of Security Engineering, installing, commissioning, and maintaining electronic systems to safeguard individuals, homes, and properties
Learn the ins and outs of installing and maintaining systems including intrusion detection, CCTV systems, and access control
This is a field-based position covering all of London & South East areas supporting a key clients of our business
Our team primarily focusus on large instillation projects that take 3-6 months to complete
You will gain experience across both the install and service teams as part of this role
Hit the road with your own company van, traveling daily to client premises
You will work closely with your dedicated team, soaking up essential skills to become a qualified security engineer
Training:
Enrol in a Level 3 Fire Emergency and Security Systems Technician qualification delivered by Banham Academy alongside fellow Johnson Controls apprentices
While attending this qualification you will only be assessed on the security modules delivered. A rotation to our fire security team may be organised during the apprenticeship.
Engage in block release basis training and receive on-the-job guidance from experienced mentors and engineers
Training Outcome:
Upon completion of this apprenticeship there are many internal opportunities within the company
Many of our previous apprentices have become lead engineers and take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :Days to be confirmed between the hours of 8.30am - 5.00pm, or as per business needs.Skills: Communication skills,IT skills,Organisation skills,Team working,purpose led,customer driven,future focused....Read more...
Medical Devices – Senior Mechanical Design Engineer – Cambridge
Due to successful growth plans, a Medical Devices organization based in Cambridge is currently seeking a Senior Mechanical Design Engineer to contribute to the development and improvement of life-saving Medical Devices.
Collaborating closely with other industry experts, such as electronics design engineers, software engineers, physicists, and other Medical Devices specialists, you will tackle some of the most complex challenges in the development of new Medical Technologies.
Ideally, you will have a background in developing new Medical Devices throughout the entire design life cycle, adhering to ISO 13485 standards. If you have not worked on Medical Devices, we will consider candidates from other highly regulated industries such as life sciences, robotics, product development, etc.
For the 3D CAD elements of your role, you will primarily use SolidWorks. Familiarity with this tool would be advantageous, but we are open to considering other 3D CAD tools if you have a proven track record of quickly acquiring new skills.
When discussing complex problems, it would be beneficial if the Medical Devices you have worked on have involved fluidics, mechanism design, thermal issues, FEA, or other intricate applications. We do not expect you to have experience in all of these areas; they are just a few examples of the challenges you may encounter.
This company is experiencing growth but remains at a size where your work will significantly impact the company's success and projects. Therefore, we are seeking a team player accustomed to collaborating with diverse individuals both within and outside of the organization.
While continually facing challenges, you will advance your skills at the forefront of the sector. In addition to this, you will receive an excellent starting salary, a bonus (typically around 20%, recently even higher), BUPA healthcare, a pension plan, a generous holiday allowance, and other outstanding benefits.
Salary will be commensurate with experience, and we welcome applications from candidates with a few years of industry experience to those with over twenty years of experience. Finding the right fit is more important to us than a specific number of years of experience.
It is expected that you hold a degree in addition to any industry experience. If you also possess a PhD, it would be welcomed but is not essential.
Interviews will be conducted as soon as a suitable candidate is identified. If you are interested in exploring this role, we recommend submitting your application and CV. Please note that your CV will not be forwarded to the company until after we have discussed the role and the company in detail.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialised recruitment company operating in the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Automation Engineer (Contract)
Location: Brixworth, Northants Contract Length: 12 Months Rate: £490 per day (Inside IR35) Start Date: ASAP IR35 Status: Inside IR35
Overview
We are seeking an experienced Automation Engineer for a 12-month contract role, working on a high-profile manufacturing programme in the automotive sector. This position is inside IR35 and offers £490 per day. The successful candidate will bring strong experience with legacy machinery and, ideally, exposure to KUKA robotics.
You’ll be responsible for supporting and implementing robust automation and control systems, with a focus on legacy integration, system availability, and process stability.
Key Responsibilities
Analyse, design, simulate, and test procedures for automated machinery and processes
Implement and support automation technology systems, controls architecture and manufacturing standards
Collaborate with suppliers and internal teams to deliver automation solutions from concept through to production
Monitor project performance and timelines, ensuring delivery to scope and budget
Support shop equipment specification, RfQ processes, and commissioning activities
Work with PLCs (preferably Siemens S7, TIA Portal) and automation systems
Translate technical language between programming and engineering disciplines
Drive continuous improvement in manufacturing efficiency and process optimisation
Support adherence to environmental protection standards and legal compliance
Participate in team meetings and cross-functional collaboration
Essential Skills & Experience
Experience working with legacy machinery and automation systems
Ideally experience with KUKA robotics
Solid understanding of PLC programming and automation software development
Previous use of Siemens S7 and TIA Portal
Strong problem-solving skills using programming, data analysis, and controls systems
Familiarity with lean manufacturing principles and process engineering
Excellent communication and documentation skills
Ability to work independently and manage small-scale projects
Comfortable in a fast-paced, change-driven manufacturing environment
Qualifications
Degree in Electrical Engineering, Computer Science, Automation, or similar field – or equivalent experience
Relevant experience in a similar role
Proven ability to deliver technical solutions in a production or industrial setting
If this role is of interest, please apply with your CV.
If you have no heard back within 7 days, please assume that your application has been unsuccessful on this occasion.....Read more...
