Electrical Field Service Engineer (EV Infrastructure)
Location: Birmingham
Sector: EV Infrastructure
Salary: £34 48,000 DOE Plus Van and Fuel Card
Overview
Holt Engineering is seeking an Electrical Field Service Engineer to commission, maintain, and repair EV charging equipment across the UK, including AC chargers, Rapid DC, Ultra and High-Power Charging (HPC) systems.
This position suits an engineer with a strong electrical background who can work autonomously and deliver high-quality on-site support. The successful candidate will ensure EV charging stations operate reliably, safely, and to the standards expected by clients and end users.
The role involves working in varied environments, including outdoor locations and confined spaces. Occasional travel and overnight stays will be required.
Essential requirements
- NVQ Level 3 Electrical qualification
- Minimum 2 years experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment)
- Proven ability to work independently on customer sites and resolve issues without direct supervision
- Experience working in SLA-driven environments
- Familiarity with test and measurement tools such as multimeters and voltage testers
- Strong fault-finding and problem-solving capability, including diagnosis of complex issues
- Clear communication and strong customer-facing skills
- Effective time management while travelling between sites
- Full UK driving licence with 6 penalty points or fewer
Desirable requirements
- BS7671:2018 (18th Edition Wiring Regulations)
- City & Guilds 2391/2394 Testing and Inspection
- Experience in EV charging, renewable energy, or power electronics environments
- EV charging certification and/or manufacturer-specific training
- Hands-on experience commissioning, maintaining, and repairing Rapid DC, Ultra and HPC chargers
- Ability to read and interpret electrical schematics and technical manuals
- Understanding of analogue and digital electronics and components
- Strong awareness of electrical hazards and on-site health & safety requirements
Key responsibilities
- Work closely with Service Coordination and Operations teams to ensure accurate job data capture and timely service reporting
- Commission and configure AC and Rapid DC chargers on client sites
- Complete initial setup and functional testing to ensure correct operation and compliance with relevant standards
- Collaborate with project management and installation teams to support smooth integration of chargers into customer infrastructure
- Maintain company tools, assets, and test equipment, reporting defects promptly
- Carry out routine and preventative maintenance to maximise charger uptime and performance
- Diagnose and resolve issues across electrical, mechanical, and software-related fault types
- Perform diagnostic testing, firmware updates, and calibration where required
- Replace faulty components and, where necessary, complete full AC charger swaps, following manufacturer guidelines
- Provide on-site technical support and basic operational guidance/training to clients
- Respond to service requests promptly and keep clients updated to support customer satisfaction
- Record all service activity, repairs, maintenance actions, and customer communications within the service management system
- Follow all company policies and safety procedures while working in the field
- Ensure compliance with applicable electrical codes and standards during commissioning and maintenance
- Participate in mandatory safety training and renew certifications as required
Benefits
- Structured career progression framework
- Company van and fuel card
- Overtime
- 30 days annual leave (inclusive of company shutdown days)
- Travel subsistence provided
- Discretionary company performance bonus
- BUPA healthcare (after 6 months)
- Salary sacrifice pension scheme (8% total)
- Salary sacrifice EV car scheme and charger installation
- Salary sacrifice holiday purchase scheme (up to 5 days)
- Enhanced family-friendly policies
- Flexible benefits platform with a wide range of discounted products and services
- Long service awards
....Read more...
As part of the role, you will work to develop your skills and take on more responsibilities over time, with the aim of moving in to a fully qualified field engineer role.
Day-to-day will include:
Carrying out the installation, repair, servicing and validation of decontamination equipment
Electronic fault finding
Travel to sites regionally to service and repair equipment
Assist service engineers during site visits
Complete assisigned College work and portfolio for qualification
Work with a friendly and supportive team
Training:
Day-release for the apprenticeship will take place at Stoke-on-Trent College's Burslem Campus, ST6 1JJ
Training Outcome:
Following completion of the apprenticeship, the intention would be for the successful candidate to become a fully qualified field engineer on a permenant basis
Employer Description:We are unique suppliers to UK endoscopy units in that we provide a complete package and service. From effective and innovative consumables and accessories to bespoke reprocessing systems. We offer installation, service and maintenance on decontamination equipment and a complete validation and testing service to both the NHS and Private Groups.Working Hours :Typical Hours are Monday - Friday, 8.00am - 4.00pm. Hours may vary around job demands.Skills: Attention to detail,Problem solving skills,Analytical skills,Logical,Team working....Read more...
Field Service Engineer
Watford
£34,000 - £36,000 Basic + Training + Stability + Job satisfaction + Work Life balance + Family feel + Travel paid + Profit Share Bonus + Company Van + Fuel Card + Personal use + Pension + Optional Overtime
Currently a Field Service Engineer looking to solidify your career in the medical industry? Join this family-feel company where you will receive full manufacturer training to do your job to the best of your ability and benefit from everyday job satisfaction in a great company culture. You will be well looked after for the long term and be provided a fantastic all-round package!
This forward-thinking medical equipment supplier is successfully growing in the industry with plans to expand over the next few years. As a Field Service Engineer you'll be offered a varied role within this specialist industry, whilst having a work-life balance and being appreciated for the long term!
Your Role As A Field Service Engineer Will Include:
Service, Repairs And Installations Of Medical Lifting Equipment
Full OEM Manufacturer Training
Field Service Engineer Role Covering The Watford Area
As A Field Service Engineer You Will Need To Have:
Experience Within ANY Electro-Mechanical Industry (Medical / Lifting Equipment desired)
Full Driving Licence
Ability To Travel Around the Watford Area
If this sounds like you call Rebecka Van Ristell on 07458163046for IMMEDIATE CONSIDERATION or hit apply now.
....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Field Service Engineer – Medical Diagnostic Products
Field Medical Engineer roles in the South East and National. Zest Optical are recruiting for experienced Medical Device Engineers to be responsible for the service, repair, and support of a range of ophthalmic equipment across the UK and International countries. The role requires the engineer to deliver a high standard of technical service and customer support, including installations, routine maintenance, and troubleshooting of hardware and software related to all medical devices.
This is a field-based role involving regular travel across the UK and International countries and requires high levels of commitment and a can do attitude, strong work ethics, complete flexibility, and a high level of professionalism to ensure customer satisfaction and business efficiency at all times.
Essential Duties and Responsibilities:
Responding to all emails on the same working day
Maintaining 100% response rate to breakdowns keeping all internal and external ticketing systems up to date at all times
Carry out daily service visits including installations, repairs, and preventative maintenance of branded equipment and other medical systems.
Provide responsive and professional technical support to internal and external customers.
Diagnose and resolve faults with both hardware and software, including integration with DICOM and PACS systems.
Participate in weekend work and travel at short notice where required to meet urgent service needs.
Maintain accurate service records, reports, and logs in line with ISO 13485:2016 QMS procedures.
Ensure compliance with all health, safety, and regulatory standards.
Assist with logistics including dispatch and warehousing of technical equipment.
Support company exhibitions and training events as required.
Deliver basic user training to clinical and technical users on installed systems.
Demonstrate initiative and flexibility in prioritising workload to meet critical deadlines.
Qualifications / Competencies / Position Requirements:
Proven technical knowledge of medical imaging equipment, ideally ophthalmic devices.
Experience with IT networking, Microsoft SQL, and software integration (DICOM, HL7).
Strong problem-solving and troubleshooting skills.
Willingness to work unsociable hours, weekends, and travel extensively within the UK and International countries.
Excellent time management and ability to work independently with minimal supervision.
Strong communication and interpersonal skills.
High level of integrity, professionalism, and commitment to the role.
Understanding and compliance with ISO 13485: 2016 and medical device regulatory standards.
Attend manufacturers technical service training in UK and abroad.
Higher Education and Experience:
Degree or formal qualification in electronics, biomedical engineering, or a related technical discipline. Experience working with ophthalmic or medical diagnostic technologies in a commercial or clinical setting. Salary up to 45K with vehicle and benefits package.....Read more...
RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation. The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing. This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing.....Read more...
RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation. The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing. This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing.....Read more...
Field Service Engineer – Forklifts£35,000 – £40,000 | Leeds & West Yorkshire | No Working AwayOur client is a family-run business with nearly 40 years’ experience in the materials handling industry. They are known for doing things the right way — putting people, trust, and service before KPIs. Many of their customers (and team members!) have been with them for decades, which says everything about their values and culture.This is a business where engineers are genuinely valued, workloads are planned sensibly, and you’re not left miles from home at the end of the day. If you’re looking for a role where you’re treated like a person rather than a number, this could be the opportunity for you.The RoleAs a Field Service Engineer, you’ll be responsible for the repair and maintenance of a wide range of forklifts across Leeds and West Yorkshire. While our client is an HC dealer, you’ll also work on a variety of other manufacturers’ trucks — so no two days are the same.You’ll be working independently for the most part, but with the support of a friendly, experienced team behind you. The work is planned so you’re never hours away from home — they genuinely believe you should be able to get home for your tea.Key Responsibilities
Carrying out repairs and planned maintenance on customer forkliftsWorking on electric and LPG trucks (diesel experience is a bonus)Maintaining the company’s own forklift fleet when requiredProviding excellent customer service as the face of the businessManaging your time efficiently and working safely at all times
About You
At least 2 years’ experience as a Field Service Engineer in the material handling industryStrong experience with electric and LPG forkliftsDiesel forklift experience advantageous but not essentialConfident working independently and as part of a teamExcellent communication and customer-facing skillsGood time management and problem-solving abilitiesClean UK driving licence
What’s in It for You
Salary: £35,000 – £40,000 (depending on experience)Company van with personal useFuel cardWeek off at Christmas (not taken from annual leave)Sick payPension schemeLOLER training provided if not already heldEarly finish at 3:30pm every FridayNo working away
Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.....Read more...
Electronics Engineer – Cancer Instrumentation – Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices. While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards. You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients. However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success. They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Medical Devices Electronics Engineer – Circuits Design – Embedded Software – Cambridge
A growing Medical Devices company, based in Cambridge, is currently looking for an experienced Electronics Engineer to assist with the circuit design of a range of brand-new Medical Devices that will contribute to life-saving and life-improving technologies.
Due to the growth in workload across the business, they need a couple of people in this role. The company is hoping to introduce skillsets to the business that they currently don't possess. Consequently, it would be highly advantageous if you have experience as an Electronics Engineer who has worked on PCB design, circuit design, embedded software, or firmware engineering.
The types of Medical Devices you will be working on will change regularly. Therefore, it would be beneficial if you have experience working on a variety of projects throughout your career. Although experience with Medical Devices would be useful, we are open to candidates with experience in other highly regulated sectors.
The invention and improvement of Medical Devices are the core focus of this company, meaning you will always be working on the cutting edge of the sector, continuously learning new things.
In addition to having some industry experience, it is expected that you hold a degree in an electronics-related field or another field that has led you into an electronics engineering role.
This is a great company for advancing your career due to working on complex products and continued skills/industry training. Apart from this you will be rewarded with an excellent starting salary, bonuses, enhanced pension, higher than normal holiday allowance and other excellent benefits.
I anticipate a lot of interest in this role, so if you are interested, I suggest submitting your application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Test EngineerActon
£32,000 - £35,000 Basic + Stability + Clean Working Environment + Training + Progression + Holidays + Pension
Are you looking for a Test Engineer role where you can develop your skills working on complex, high-value scientific equipment? This is a great opportunity to join a specialist engineering business where you’ll work alongside experienced engineers in a supportive and technically driven environment.
This company designs and manufactures advanced scientific systems and is continuing to grow due to increasing demand. As a Test Engineer, you’ll play a key role in ensuring product quality while gaining exposure to cutting-edge technology and international projects.
Your Role as a Test Engineer: * Testing a wide range of scientific instruments * Working to defined test schedules and specification* Completing Factory Acceptance Tests (FAT) * Fault-finding and diagnosing technical issues * Supporting packing and preparation of systems* Liaising with customers and supporting training on systems
The Successful Test Engineer Will Have: * Strong mechanical skills * Good troubleshooting and fault-finding ability * Analytical mindset with attention to detail * Engineering or Physics degree or experience with low-temperature systems is desirable.*Ability to commute to the Acton areaPlease apply or contact Rebecka for immediate consideration.
Keywords: Test Engineer, Testing Engineer, Mechanical Engineer, Electrical Engineer, Electronic Engineer, Electronics Engineer, Service Engineer, Field Service Engineer, Commissioning Engineer, Installation Engineer, Production Engineer, Manufacturing Engineer, Quality Engineer, Systems Engineer, Calibration Engineer, Validation Engineer, Fault Finding, Diagnostics, Troubleshooting, FAT, Factory Acceptance Test, SAT, Scientific Equipment, Laboratory Equipment, Instrumentation, Electro-Mechanical, Mechatronics, Engineering Technician, Graduate Engineer,Acton, West London, Ealing, Park Royal, Hammersmith, Chiswick, Shepherd’s Bush, White City, Wembley, Greenford, Northolt, Brentford, Harlesden, Perivale, Hayes, Uxbridge, Southall, Hanwell, London
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Applications from candidates without this right will not be processed. We will endeavour to respond to all applicants; however, due to the volume of applications, only shortlisted candidates will be contacted.....Read more...
An exciting opportunity has arisen for a Crane Engineer / Lifting Equipment Engineer / Heavy Plant Fitter to join a well-established crane business specialising in designing, supplying, servicing and repairing lorry-loader cranes.
As a Crane Engineer / Lifting Equipment Engineer / Heavy Plant Fitter, you will be responsible for the repair and maintenance of cranes and lifting equipment, using your expertise in mechanical systems, hydraulics, and electrical components.
This full-time permanent role offers a salary range of £40,000 - £50,000 and benefits. Training will be provided for the right candidate.
Key Responsibilities:
* Conducting mechanical, hydraulic, and basic electrical repairs on cranes and lifting equipment.
* Diagnosing faults and carrying out repairs within the workshop environment.
* Assisting in the servicing, maintenance, and refurbishment of equipment.
* Handling mechanical systems, hydraulics, and electrical components.
* Ensuring all tasks meet safety standards and company protocols.
* Supporting the engineering team with workshop duties and equipment preparation.
What We Are Looking For:
* Previously worked as a Crane Engineer, Crane Service Engineer, Crane technician, Crane service technician, Heavy Plant Fitter, Heavy Plant Engineer, Plant Technician, Plant Mechanic, Plant fitter, Plant engineer, Mechanical Fitter, Lifting Equipment Engineer, Forklift Engineer, HGV Mechanic, Service Engineer, Hydraulic Engineer, Workshop Technician, Workshop engineer or in a similar role.
* Practical experience in mechanical engineering, specifically with heavy equipment or plant machinery.
* Strong knowledge of hydraulics and mechanical systems.
* Experience with basic electrical fault-finding.
* A background in workshop or field service engineering.
* A full UK driving licence is preferred.
Suitable background to have: Cranes, Heavy plant, Construction equipment, Forklifts, Powered access equipment, Agricultural machinery, HGV mechanics, Lifting equipment / hoists, Generator engineers, Mechanical fitters (heavy equipment)
This is a great opportunity for a Crane Engineer / Lifting Equipment Engineer / Plant Fitter looking to build a career within the crane industry.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Workshop Engineer / Crane Engineer to join a well-established crane business specialising in designing, supplying, servicing and repairing lorry-loader cranes.
As a Workshop Engineer / Crane Engineer, you will be responsible for the repair and maintenance of cranes and lifting equipment, using your expertise in mechanical systems, hydraulics, and electrical components.
This full-time permanent role offers a salary range of £40,000 - £50,000 and benefits. Training will be provided for the right candidate.
Key Responsibilities:
* Conducting mechanical, hydraulic, and basic electrical repairs on cranes and lifting equipment.
* Diagnosing faults and carrying out repairs within the workshop environment.
* Assisting in the servicing, maintenance, and refurbishment of equipment.
* Handling mechanical systems, hydraulics, and electrical components.
* Ensuring all tasks meet safety standards and company protocols.
* Supporting the engineering team with workshop duties and equipment preparation.
What We Are Looking For:
* Previously worked as a Crane Engineer, Crane Service Engineer, Crane technician, Crane service technician, Heavy Plant Fitter, Heavy Plant Engineer, Plant Technician, Plant Mechanic, Plant fitter, Plant engineer, Mechanical Fitter, Lifting Equipment Engineer, Forklift Engineer, HGV Mechanic, Service Engineer, Hydraulic Engineer, Workshop Technician, Workshop engineer or in a similar role.
* Practical experience in mechanical engineering, specifically with heavy equipment or plant machinery.
* Strong knowledge of hydraulics and mechanical systems.
* Experience with basic electrical fault-finding.
* A background in workshop or field service engineering.
* A full UK driving licence is preferred.
Suitable background to have: Cranes, Heavy plant, Construction equipment, Forklifts, Powered access equipment, Agricultural machinery, HGV mechanics, Lifting equipment / hoists, Generator engineers, Mechanical fitters (heavy equipment)
This is a great opportunity for a Workshop Engineer / Crane Engineer looking to build a career within the crane industry.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity for an Applications Engineer has arisen with my client in North London.
This is an amazing new opportunity for an Applications Engineer, based in North London to work for a highly technical organisation specialising in the design and manufacture of semiconductor wafer scale imaging devices for the medical and EV sectors.
The Applications Engineer, North London, will sit in the R&D team and perform a key role supporting in all areas of product design process from initial creation requirements to final product validation of image sensors and flat-panel X-ray detector panels.
You will also hold the following responsibilities:
Working with the design teams creating test methods, plans and reports for new image sensor products and systems.
Providing technical support to customers in the field for applicational use.
Resolve technical product issues, conduct failure analysis and statistical reporting on faults
The ideal Applications Engineer, based in North London, will have previous experience within a similar role with experience across:
Semiconductor sensors / X-Ray imaging systems
Knowledge of digital and analogue circuits design
Carrying out validation and verification test procedures
APPLY NOW! For the Applications Engineer, based in North London, by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 07961 158762 quoting ref. THD1353. Otherwise, we always welcome the opportunity to discuss other roles similar to Design and Test Engineering roles on 01582 878 848.....Read more...
Medical Devices Consultant – Senior Mechanical Engineer – Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role. The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology. Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties. Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices. Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required. However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector. Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly. The organisation is open to candidates with varying levels of experience. If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
An opportunity has arisen for a Water Hygiene Technician / Water Treatment Engineer to join a well-established company providing heating, plumbing, and renewable energy solutions specialising in boilers, heat pumps, solar systems, and water hygiene services.
As a Water Hygiene Technician / Water Treatment Engineer, you will be assisting with water hygiene monitoring, sampling, and maintenance to ensure compliance with industry regulations.
This full-time role offers a salary range of £;22,000 - £32,000 and benefits.
You Will Be Responsible For:
? Taking water samples from various outlets for analysis.
? Conducting temperature checks and routine site inspections.
? Flushing infrequently used outlets as part of Legionella control measures.
? Cleaning and disinfecting showerheads and hoses.
? Assisting with water tank cleaning, disinfection, and chlorination works.
? Supporting senior engineers with technical duties such as TMV servicing and system inspections.
? Completing accurate site documentation and electronic reporting.
What We Are Looking For:
? Previously worked as a Water Hygiene Technician, Water Hygiene Operative, Water Treatment Operative, Legionella Technician, Water Treatment Technician, Water Hygiene Engineer, Legionella Risk Assessor, Water Service Technician,Water Treatment Engineer or in a similar role.
? Previous experience in water hygiene, plumbing, or a related technical field.
? Understanding of Legionella control, ACoP L8 and HSG274 Parts 2 & 3
? Relevant certifications such as Asbestos Awareness, Manual Handling, or CSCS .
? Comfortable working in varied environments including plant rooms, schools, and healthcare sites.
? Basic IT literacy for completing reports.
? Full UK driving licence.
What's on Offer:
? Competitive salary
? Overtime opportunities.
? Comprehensive training and career development pathway.
? Company vehicle and fuel card (post-probation).
? Full PPE and equipment provided.
? Ad....Read more...
Resident Forklift Engineer / Forklift Maintenance Engineer
Location: Hull
Salary: Competitive + Shift Allowance + Overtime
Hours: 4045 hours per week | Monday Friday
An exciting opportunity has arisen for a skilled Resident Forklift Engineer to join a leading engineering support team working directly on-site with a major industrial customer within the DN post code. This role is ideal for an experienced Resident Forklift Engineer who enjoys diagnosing faults, carrying out maintenance, and ensuring material handling equipment operates safely and efficiently.
As a Resident Forklift Engineer, you will be based permanently at a customer site, maintaining and repairing a fleet of forklifts and warehouse equipment. The successful Resident Forklift Engineer will play a key role in minimising downtime and ensuring the customers operation runs smoothly. This is a great opportunity for a hands-on Resident Forklift Engineer who enjoys problem-solving, working with modern equipment, and building strong relationships with site teams.
Key Responsibilities
As a Resident Forklift Engineer, your duties will include:
Service & Maintenance: Carry out routine servicing and preventative maintenance on a fleet of forklifts and material handling equipment.
Diagnostics & Repairs: Diagnose and repair mechanical, hydraulic, and electrical faults on forklift trucks and warehouse equipment.
Breakdown Response: Respond quickly to breakdowns to minimise operational downtime and ensure equipment is returned to service efficiently.
Equipment Inspections: Conduct regular safety checks and inspections to ensure all equipment meets operational and safety standards.
Customer Support: Work closely with site teams and operators to provide technical support and maintain excellent working relationships.
Service Reporting: Complete digital service reports, record repairs, and order parts using company systems.
What Were Looking For
To be successful in this Resident Forklift Engineer position, candidates should have:
Experience working as a Resident Forklift Engineer, Forklift Engineer, Plant Fitter, Plant Engineer, or Vehicle Technician
Strong mechanical knowledge including hydraulics, diesel engines, and electrical fault finding
Experience servicing forklift trucks or similar mechanical equipment
The ability to work independently while also supporting the wider site team
Good communication skills and a proactive approach to problem solving
A full UK driving licence
Whats on Offer
Competitive salary based on experience
Shift allowance and overtime opportunities
Pension scheme
25 days annual leave plus bank holidays
Ongoing technical training and development
Career progression opportunities
Laptop, phone, specialist tools, and PPE provided
Apply Now If you are an experienced Resident Forklift Engineer looking for a stable site-based role with long-term career prospects, we would like to hear from you. Apply today with your CV to learn more about this Resident Forklift Engineer opportunity.
Holt Recruitment Specialising in Plant, Agricultural, Powered Access, Forklift, Lift & Access, Static plant. We recruit across the UK for Resident Forklift Engineer, Forklift Engineer, Forklift Technician, Plant Engineer, Plant Fitter, Material Handling Engineer, Mechanical Engineer, Field Service Engineer, Maintenance Engineer. PK - peter@holtautomotive.co.uk....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
Produce accurate civil and structural drawings using industry-leading Computer Aided Design (CAD), Revit, and Building information Modelling (BIM) software.
Collaborate with engineers and project managers to support design processes.
Ensure all drawings meet project specifications and quality standards.
Balance on-the-job training with college coursework to build a strong technical foundation.
Training:
Training will be held at Leeds Beckett University.
College attendance will be one day per week on a day release basis.
Training Outcome:After completing a Degree Apprenticeship in Civil/Structural Engineering, there are several career progression routes you can take, depending on your interests and goals. Here’s a typical pathway:
1. Graduate Engineer/Junior Engineer (Post-Apprenticeship Role)
Once you complete your apprenticeship, you’ll likely move into a full-time role as a Graduate Civil Engineer or Graduate Structural Engineer within the company you trained with or at a new firm. You’ll be given more responsibility on projects, working under the guidance of senior engineers while gaining further practical experience.
2. Professional Accreditation
During or after your apprenticeship, you can work towards professional accreditation with institutions like:
ICE (Institution of Civil Engineers).
IStructE (Institution of Structural Engineers).
Depending on the degree you earned and your work experience, you can achieve titles such as:
Incorporated Engineer (IEng).
Chartered Engineer (CEng) – This is a prestigious title that demonstrates a high level of skill and experience and can significantly advance your career.
3. Specialisation
As you gain experience, you may choose to specialise in a particular area, such as:
Structural Design (bridges, high-rise buildings, stadiums).
Geotechnical Engineering (foundations, earthworks).
Transportation Engineering (roads, railways).
Water Resources Engineering (dams, flood defences).
Sustainability and Environmental Engineering.
Specialising can make you highly sought after in niche markets.
4. Senior Engineer/Project Manager
With several years of experience, you could move into more senior roles such as:
Senior Civil/Structural Engineer.
Project Engineer.
Site Manager.
Project Manager.
In these roles, you’ll lead larger projects, manage teams, and be responsible for budgets, timelines, and client communications.
5. Further Qualifications and Leadership Roles
You might pursue postgraduate qualifications (like an MSc in a specialised field) or leadership/management courses (e.g., MBA) if you're interested in moving into executive positions.
Potential high-level roles include:
Principal Engineer.
Technical Director.
Engineering Consultant.
Operations Manager.
Director of Engineering/Partner in an Engineering Firm.
6. Alternative Pathways
Academia or Research: If you enjoy the academic side, you could move into teaching or research, possibly after further study.
Entrepreneurship: Start your own engineering consultancy or contracting firm.
International Opportunities: Civil/structural engineering skills are in demand worldwide, giving you opportunities to work on global projects.
Final ThoughtsYour career progression will depend on your interests, the industry sector you choose (public infrastructure, private construction, consultancy), and how proactive you are in seeking additional qualifications and responsibilities. Continuous professional development (CPD) is crucial in this field, ensuring you stay updated with the latest technologies, regulations, and best practices.Employer Description:JPG excels in providing the highest quality civil and structural engineering consultancy services. We work for clients UK wide and internationally, covering all the major development sectors and working on projects from site acquisition and appraisal through to construction completion.
Our dedicated team of engineers and technicians are skilled in all aspects of civil and structural design, combining creativity and environmental innovation with exacting compliance to industry regulation.Working Hours :Full-time position - 7.5 hours per day - 37.5 hours per week. Monday to Friday 08:30am-5:00pm with one hour's flexibility around the start and finishing times. One hour for lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Desire to Learn....Read more...
Due to growth and new contracts, we’re looking for an additional Senior Regional Service Engineer to join a dedicated service team, where you’ll play a key role in upholding the brand and delivering outstanding service to customers.
This is a hands on, field based role, focused on the service and repair of industrial and municipal cleaning equipment. You’ll be representing a globally respected company with a strong customer first approach.
Location Requirements
This is a field-based role covering South of Scotland (Glasgow / Central Belt ideal)
Key Responsibilities for the Senior Engineer
Service, maintain and repair a wide range of cleaning equipment
Diagnose faults and complete accurate service reports
Plan and manage your daily workload with the Service Manager and Scheduler
Take ownership of your area, ensuring service standards and performance are met
Manage van stock and parts effectively
Support and coach other engineers where needed
Identify potential sales leads
Build strong, professional relationships with customers
What You’ll Need
Strong experience across electrical, mechanical, hydraulic, pneumatic or diesel equipment
Background in municipal, FLT, plant hire, HGV or similar industries (ideal)
Confident diagnosing complex faults and working independently in the field
Able to manage your own workload and take responsibility for your area
Good IT skills and experience completing service reports
Full UK driving licence
Willingness to travel, including occasional overnight stays
Passport (preferred for possible training in Germany)
What’s in it for You
Salary up to £41,110
OTE £50,000+ with overtime
Fully expensed company van (optional personal use)
All tools provided
25 days holiday + bank holidays + your birthday off
Pension, health plan, sick pay & critical illness cover
End of year discretionary bonus
Staff discounts and social events
Ongoing training and career development
Training & Onboarding
You’ll follow a structured 12 week training programme, including factory led courses and hands-on support, working alongside experienced engineers with ongoing development.
....Read more...
Mechanical Design Engineer – Genomics Instrumentation – Cambridge
A growing biotechnology company, based in Cambridge, is currently looking for an experienced Mechanical Design Engineer to support the development of cutting-edge genomics instrumentation.
You will be working within a multidisciplinary team of engineering experts, including physicists, electronics engineers, software developers, and life sciences specialists. You’ll be a key member of the team, contributing to the design and development of innovative devices that enable high-throughput genomic workflows and precision diagnostics.
We’re looking for someone with experience in product design and development, ideally within medical devices, diagnostics, or scientific instrumentation. A background in mechanical engineering is essential, and experience working in regulated environments (ISO 13485, FDA QSR) would be highly beneficial.
The ideal candidate will have a few years of industry experience and be looking to take the next step in their career. You’ll be involved in the full product lifecycle—from concept development and prototyping through to design for manufacture and product launch.
You’ll be rewarded with a competitive salary, regular salary reviews, bonus scheme, pension, life assurance, and other excellent benefits you’d expect from a growing, forward-thinking organisation.
This is a fantastic opportunity to join a company that invests in its people and is making a real impact in the field of genomics. Due to expected interest, I recommend applying now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices and Scientific recruitment at Newton Colmore Consulting, on +44 121 268 2240, or make an application and one of our team will be in touch.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Redline Group are working in partnership with a leading global distributor of electronic components and test & measurement solutions, to recruit their first Junior Sales Engineer focused on driving growth for strategic vendor NI.
This is an exciting opportunity to join a growing team in a newly created position where you will play a pivotal role in building pipeline and supporting business growth across the UK.
Key Responsibilities for this Junior Sales Engineer based in Leeds:
Manage and qualify inbound leads related to NI solutions
Identify and develop new customer opportunities within the UK market
Build and maintain a strong sales pipeline to support BDM revenue growth
Maintain accurate CRM records and activity reporting
Collaborate closely with BDMs and NI to align on territory and growth strategy
Proactively generate new business conversations to expand market reach
Ideal background for this Junior Sales Engineer based in Leeds:
Junior sales experience (internal sales, SDR, BDR or similar)
Some technical awareness or exposure to engineering environments (degree not essential)
Strong communication and relationship-building skills
Highly organised with strong attention to detail
Ambitious, proactive and commercially driven
Comfortable working independently in a remote or office-based environment
Why Join this Junior Sales Engineer based in Leeds:
This is a rare opportunity to become the first Junior Sales Engineer hire in a strategic growth area for my client. You will gain exposure to a globally recognised test & measurement brand, develop valuable technical sales expertise, and play a visible role in driving UK growth for the business.
The role offers flexibility (office or home-based), clear progression into field sales or account management, and the opportunity to join a supportive organisation with strong retention and a clear growth agenda
Want to apply?
To apply for this this Internal Sales Engineer based in Leeds please send over your CV!....Read more...
Redline Group are working in partnership with a leading global distributor of electronic components and test & measurement solutions, to recruit their first Internal Sales Engineer focused on driving growth for strategic vendor NI.
This is an exciting opportunity to join a growing team in a newly created position where you will play a pivotal role in building pipeline and supporting business growth across the UK.
Key Responsibilities for this Internal Sales Engineer based in Leeds:
Manage and qualify inbound leads related to NI solutions
Identify and develop new customer opportunities within the UK market
Build and maintain a strong sales pipeline to support BDM revenue growth
Maintain accurate CRM records and activity reporting
Collaborate closely with BDMs and NI to align on territory and growth strategy
Proactively generate new business conversations to expand market reach
Ideal background for this Internal Sales Engineer based in Leeds:
Junior sales experience (internal sales, SDR, BDR or similar)
Some technical awareness or exposure to engineering environments (degree not essential)
Strong communication and relationship-building skills
Highly organised with strong attention to detail
Ambitious, proactive and commercially driven
Comfortable working independently in a remote or office-based environment
Why Join this Internal Sales Engineer based in Leeds:
This is a rare opportunity to become the first Internal Sales Engineer hire in a strategic growth area for my client. You will gain exposure to a globally recognised test & measurement brand, develop valuable technical sales expertise, and play a visible role in driving UK growth for the business.
The role offers flexibility (office or home-based), clear progression into field sales or account management, and the opportunity to join a supportive organisation with strong retention and a clear growth agenda
Want to apply?
To apply for this this Internal Sales Engineer based in Leeds please send over your CV!....Read more...
Due to growth and new contracts, we’re looking for an additional Senior Regional Service Engineer to join a dedicated service team, where you’ll play a key role in upholding the brand and delivering outstanding service to customers.
This is a hands on, field based role, focused on the service and repair of industrial and municipal cleaning equipment. You’ll be representing a globally respected company with a strong customer first approach.
Location Requirements
This is a field-based role covering London and surrounding areas. We are open on location and welcome applications from engineers based across the wider London region
Key Responsibilities for the Senior Engineer
Service, maintain and repair a wide range of cleaning equipment
Diagnose faults and complete accurate service reports
Plan and manage your daily workload with the Service Manager and Scheduler
Take ownership of your area, ensuring service standards and performance are met
Manage van stock and parts effectively
Support and coach other engineers where needed
Identify potential sales leads
Build strong, professional relationships with customers
What You’ll Need
Strong experience across electrical, mechanical, hydraulic, pneumatic or diesel equipment
Background in municipal, FLT, plant hire, HGV or similar industries (ideal)
Confident diagnosing complex faults and working independently in the field
Able to manage your own workload and take responsibility for your area
Good IT skills and experience completing service reports
Full UK driving licence
Willingness to travel, including occasional overnight stays
Passport (preferred for possible training in Germany)
What’s in it for You
Salary up to £41,110
OTE £50,000+ with overtime
London weighting (£300 per month where applicable)
Fully expensed company van (optional personal use)
All tools provided
25 days holiday + bank holidays + your birthday off
Pension, health plan, sick pay & critical illness cover
End of year discretionary bonus
Staff discounts and social events
Ongoing training and career development
Training & Onboarding
You’ll follow a structured 12 week training programme, including factory led courses and hands-on support, working alongside experienced engineers with ongoing development.
....Read more...
