Field Services Engineer required to work on the installation, test, troubleshot and maintenance of switchgear for Marine, Industrial and Offshore clients, (some overseas travel as required). You will be joining an experienced, highly skilled and motivated team who ensure the safe execution of all Service Projects. The goal is to consistently provide customers with an excellent switchgear and ancillary equipment Servicing, Upgrade, Preventative maintenance and Life Extension from the workshop, customers site, offshore or marine.
Skills
Electrical switchgear operation, maintenance and fault finding.
Offshore or marine working.
Time served electrical engineering apprentice
ONC or equivalent in Electrical Engineering.
Protection relay testing, Air Circuit Breaker testing, Retrofits ACB's, MCCB's and Switches, Breaker servicing, Thermographic Survey, Partial Discharge testing, Oil Circuit Breake service and test, Asbestos Arc Chute replacement, Asbestos Fuseswitch Shroud replacement, and Off shore Service and Maintenance.
Responsibilities
Respond to customer enquiries for technical support, advice and future service offerings including quotations.
Safely perform Service related tasks such as.
Switchgear service and maintenance
Switchgear upgrades and life extension projects
Protection relay testing and upgrade.
Switchgear breakdown investigation and repair
Undertaking pre mobilisation duties, including but not limited to, Project Specific Risk Assessments, Method Statements, etc.....Read more...
Field Services Engineer required to work on the installation, test, troubleshot and maintenance of switchgear for Marine, Industrial and Offshore clients, (some overseas travel as required). You will be joining an experienced, highly skilled and motivated team who ensure the safe execution of all Service Projects. The goal is to consistently provide customers with an excellent switchgear and ancillary equipment Servicing, Upgrade, Preventative maintenance and Life Extension from the workshop, customers site, offshore or marine.
Skills
Electrical switchgear operation, maintenance and fault finding.
Offshore or marine working.
Time served electrical engineering apprentice
ONC or equivalent in Electrical Engineering.
Protection relay testing, Air Circuit Breaker testing, Retrofits ACB's, MCCB's and Switches, Breaker servicing, Thermographic Survey, Partial Discharge testing, Oil Circuit Breake service and test, Asbestos Arc Chute replacement, Asbestos Fuseswitch Shroud replacement, and Off shore Service and Maintenance.
Responsibilities
Respond to customer enquiries for technical support, advice and future service offerings including quotations.
Safely perform Service related tasks such as.
Switchgear service and maintenance
Switchgear upgrades and life extension projects
Protection relay testing and upgrade.
Switchgear breakdown investigation and repair
Undertaking pre mobilisation duties, including but not limited to, Project Specific Risk Assessments, Method Statements, etc.....Read more...
An exciting opportunity has arisen for a Mobile Plant Fitter to join a privately owned mineral and aggregates contractor with extensive experience in the plant industry. This role offers salary of £19.24 and benefits.
As a Plant Fitter, you will undertake maintenance and repair of OEM branded equipment, conduct diagnostics and inspections.
You will be responsible for:
* Conduct inspections, local preparation, and brake testing.
* Order parts for repairs as necessary.
* Assist and coach colleagues as needed.
* Complete all systems and paperwork for assigned tasks.
What we are looking for:
* Previously worked as a Plant Fitter, Plant Technician, Plant Mechanic, Plant Engineer, Service Engineer or in a similar role.
* 5+ years experience in heavy construction plant repair (Bulldozers, Dump Trucks, Excavators, Graders, Loading Shovels etc.)
* Knowledge of Tier 4 and 5 engines, Regen & Adblue Systems.
* Technical competence in diesel engines, transmissions, hydraulics & electrical systems.
* NVQ Level 3, City & Guilds or equivalent in relevant field.
Whats on offer:
* Competitive salary
* Overtime availability.
* Company van and fuel card provided.
* 20 days plus statutory bank holidays
* Death in Service (2 x Salary)
* Pension Scheme.
Apply now for this exceptional Plant Fitter opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An exciting opportunity has arisen for a Mobile Plant Fitter to join a privately owned mineral and aggregates contractor with extensive experience in the plant industry. This role offers salary of £19.24 and benefits.
As a Plant Fitter, you will undertake maintenance and repair of OEM branded equipment, conduct diagnostics and inspections.
You will be responsible for:
* Conduct inspections, local preparation, and brake testing.
* Order parts for repairs as necessary.
* Assist and coach colleagues as needed.
* Complete all systems and paperwork for assigned tasks.
What we are looking for:
* Previously worked as a Plant Fitter, Plant Technician, Plant Mechanic, Plant Engineer, Service Engineer or in a similar role.
* 5+ years experience in heavy construction plant repair (Bulldozers, Dump Trucks, Excavators, Graders, Loading Shovels etc.)
* Knowledge of Tier 4 and 5 engines, Regen & Adblue Systems.
* Technical competence in diesel engines, transmissions, hydraulics & electrical systems.
* NVQ Level 3, City & Guilds or equivalent in relevant field.
Whats on offer:
* Competitive salary
* Overtime availability.
* Company van and fuel card provided.
* 20 days plus statutory bank holidays
* Death in Service (2 x Salary)
* Pension Scheme.
Apply now for this exceptional Plant Fitter opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Electronics Engineer – Medical Devices – Cambridge
Due to the expanding nature of Medical Devices, Wearable Technologies, Robotics, Artificial Intelligence, and other advanced technologies, we are looking for someone to work on the invention of new Medical Devices. Based in Cambridge, you will be collaborating with engineers and scientists on the development of industry-changing, life-saving, and life-improving medical devices.
Technologies are developing all the time, and this organisation needs to stay at the forefront of technological breakthroughs. Due to this, they need experienced Electronics Engineers who are happy to work across several different projects.
We ideally need someone who has past experience with Medical Devices within ISO 13485 or EN 60601 standards.
While working on brand-new technologies, you will be problem-solving and thinking up exciting new ways of approaching problems on projects. This will keep your role very interesting, meaning it is unlikely that you will ever get bored in this role.
Apart from past experiences as an Electronics Engineer in Medical Devices, it is expected that you would hold a degree in an Electronics Engineering field that led you into this line of work.
You will be rewarded with an excellent starting salary, bonus, pension, gym membership, free lunches, and other excellent benefits.
I expect a lot of interest in this role, so if you are interested, I would suggest making an application now or risk missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application, and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Job Title: AOV EngineerLocation: UK (Field-Based)Start Date: 14th July or 21st JulySalary: £57,000 + Guaranteed Pay Rise After 3-Month Probation What’s Included:Company van providedQuarterly & annual performance bonuses (KPI-linked – terms agreed post-start)New business bonus scheme (details agreed post-start)25 days annual leave + 8 bank holidaysClear and structured career progressionThe Opportunity: We’re looking for an experienced AOV Engineer to join a growing, dynamic team. This is a fantastic opportunity to step into a hands-on role with excellent career development potential and great rewards. You’ll work across various projects, carrying out the installation, servicing, and maintenance of Automatic Opening Ventilation (AOV) systems. Key Responsibilities:Install, service, and maintain AOV systems across client sitesEnsure all work complies with current regulations and safety standardsDeliver projects to a high standard, independently or alongside a teamRepresent the business professionally with clients, contractors, and site teamsProvide occasional support or guidance to junior team membersWhat We’re Looking For: ✅ Proven experience in AOV installation and maintenance (essential)✅ Full, clean UK driving licence (essential)✅ Strong problem-solving and communication skills✅ Ability to work independently and as part of a team This is a fantastic opportunity to join a company that genuinely values its team, offers strong financial rewards, and supports career growth from day one. Interested? Apply today or get in touch to find out more.....Read more...
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems. The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g. soldering skills) and commissioning of PCB’s, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package – Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110....Read more...
Firmware Engineer - Electronics Hardware Integration - Defence – Cambridge
We have an important Firmware Engineer role for a growing Defence Sector organisation, aimed at contributing to the development of new technologies that will enhance the defence of the UK and other allied nations, with a focus on defensive technologies rather than offensive.
Ideally, we are looking for someone with an electronics engineering background who can leverage their Firmware Engineering experience along with knowledge of electronics hardware integration. It’s preferable if you have a proven track record of successfully completing complex projects resulting in launched devices.
Some of the project you will be involved in will be focus on the advancing new technologies, pushing boundaries, and doing things that no one has done before. This means you won’t get bored in this role and will continue to develop your careers and skills.
While prior experience in the Defence sector is ideal, we are open to consider candidates from other complex fields.
You will need to hold a degree in a software or electronics field that led you into a Firmware Engineer career. Given the nature of this role in the Defence sector, it will be essential for you to be able to obtain security clearance.
In addition to career development and interesting projects, you will also receive an excellent starting salary (dependant on experience level), bonuses, a pension, free lunches, healthcare, on site gym access and other excellent benefits typically associated with larger organisations.
Collaboration is the key focus within this company, operating within a flat structure where peers help develop your knowledge as you contribute to theirs, all while working on some of the most fascinating projects you can imagine.
If this sounds like the kind of work you want to be involved in, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you. Please note that we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Embedded Software Consultant – Defence – Cambridge
A growing and technologically intriguing Defence company, based in Cambridge, is seeking experienced Embedded Software Consultants or Engineers to assist in the development of newly invented technologies that will enhance the defence and safety of the UK.
Your Embedded Software experience should be specifically in Embedded C. Ideally, you will have experience in the Defence sector; however, we are open to candidates from other complex sectors. It will be essential that you could obtain security clearance.
Knowledge of prototyping, using C, C++, MATLAB, or another software language will be highly advantageous.
It is expected that you hold a degree in a software or electronics field, or another field that would have led you into an Embedded Software Engineer role.
We are open to candidates at various levels of experience, ranging from those with a year or two of industry experience to more senior roles. The level of responsibility will depend on your level of experience and skills.
You will be working in a multi-discipline division, including mechanical engineers, software engineers, electronics engineers, physicists, and other industry professionals with whom you will be collaborate and learn from.
Due to the expansion of this team, it is an exciting time to join and will result in career growth and opportunities that arise from the company’s natural growth.
If you want to work on complex, industry-defining technologies while being offered an excellent starting salary, salary reviews, bonus, a pension, free lunches, and other outstanding benefits, I recommend submitting an application now to avoid missing out.
For more general information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on 0121 268 2240 or make an application and one of our team at Newton Colmore will contact you. Please note we will not be able to discuss the role specifics until we have a copy of your CV.....Read more...
Project Manager
My client is seeking a diligent and detail-oriented Project Engineer to join their team. The ideal candidate will be responsible for receiving requests from customers/OEMs, collating program requirements, preparing proposal templates, and coordinating with various stakeholders to ensure successful project delivery.
Responsibilities as Project Manager
- Receive requests from customers/OEM and collate program requirements
- Prepare proposal templates
- Share requirements with TechPubs Supplier (Hemel or Sonovision)
- Review quotes received from the supplier
- Create estimations in AET (Estimation Tool)
- Release purchase orders to suppliers
- Coordinate with suppliers (Hemel or Sonovision)
- Review and approve relevant documents
- Submit documents to OEM
Qualifications as a Project Manager
- Bachelor's degree in Engineering or related field
- Strong organisational and time-management skills
- Excellent communication and interpersonal abilities
- Ability to handle multiple projects simultaneously
- with BPSS screening, legal right to work documentation, criminal record checks, and UK DBS and drug screenings
Benefits
- Contract rate of £35 - £45 per hour PAYE, depending on experience
- Inclusive and diverse work environment
- Flexible work schedule and remote work options
If you are interested in this contract, please feel free to apply directly, or if you would prefer to get in touch, you can get in touch at alison.francis@holtengineering.co.uk....Read more...
C Software Engineer – Defence Sector – Cambridge
A growing Defence and Security company, based in Cambridge, is currently seeking an experienced C Software Engineer to contribute to the development of breakthrough technologies that will enhance the UK’s security against external threats.
You will have the opportunity to work on cutting-edge systems architecture, ideally utilizing past firmware and embedded software tools. The projects you will be involved in will truly mind-blowing, challenging you on a daily basis.
It would also be ideally, though not essential, if you have previous knowledge and experience in Software-Defined Radio (SDR) and Real-Time Operating Systems (RTOS). There will also be a significant amount of algorithm development, so a strong mathematical background would be advantageous in this role.
The company has recently revamped cutting-edge labs, enabling development at the forefront of the sector. This means you will be working on brand-new developments using the latest technologies available.
Knowledge of other programming languages such as C++, MATLAB, or Python will also be required.
As this role involves working in the defence and security sectors, you will need to be able to obtain (or already hold) security clearance. If you have previous experience in the defence and security field and hold security clearance, this would be highly advantageous.
In addition to working within a growing company on some of the most fascinating projects, you will also be rewarded with an excellent starting salary (based on level of experience), bonuses, enhanced pensions, healthcare, gym membership, free lunches, and other excellent benefits you would expect from a larger organisation.
If you believe you are well-suited for this role, I suggest submitting an application now to avoid missing out on this career opportunity.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
....Read more...
Electronics Engineer – Piezoelectronics – New Product Development – Cambridge
A growing Scientific Engineering organisation is currently seeking an Electronics Engineer to assist in the product development of new piezoelectronics technologies.
You will collaborate with a team of mechanical design engineers, software engineers, and scientists, making teamwork crucial. In this role, you will be the sole electronics specialist, so confidence in your abilities is essential.
Your responsibilities will include electronics design and PCB layout for the new piezoelectronics devices, as well as writing Embedded C software and using other software languages.
While having experience in piezoelectronics would be ideal, it is not a strict requirement. However, we do prefer candidates with experience in highly regulated fields such as Medical Devices, Biotechnology, Scientific Engineering, Pharmatech, or other scientific domains.
While working on cutting-edge technologies, you will also enjoy an excellent starting salary, a generous pension, annual bonuses, private medical cover, life assurance, and other benefits typically associated with larger organisations.
Given the expected high level of interest in this role, we recommend submitting your application promptly if you are interested. We are looking for someone to start relatively soon, though we understand that you may have a notice period.
The interview process will be swift, commencing with a video interview and progressing to an in-person interview. Part of the interview may involve a tour of their state-of-the-art facilities, which are currently being expanded to stay at the forefront of technological advances.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will get in touch with you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Electronics Design Engineer – Medical Devices FPGA – Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices. However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering. Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Field Service Engineer Hourly rate £13.00 ph Based at: Wallasey Service Centre CH44 7HX – full UK driving licenceFull Time - Hours – 8:00 – 17:00 Mon-FriWe are currently looking for Field Service Engineers to join the team within our Wallasey Service Centre, covering contracts being delivered in the following areas: Wirral, Wigan, Chester, Ellesmere Port, Liverpool, South Sefton & Southport and Formby and we welcome applications from people who reside in these areas. As a healthcare equipment provider, Ross Care, work in partnership with the NHS to supply the necessary equipment and aids to support people in their day-to-day life.Job purpose:To enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchair equipment to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering, collecting, repairing, and servicing wheelchairs. The expectation is that once fully trained most jobs will be completed on a first-time fix basis.Key Responsibilities:
Delivering and collecting wheelchairs to and from service user’s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed.Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible.Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base.Ensure any PPE supplied for use in carrying out your duties is used as instructed.Once fully trained undertake out of hours responsibility when rostered.Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act.Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day.ensure the vehicle safety check and the van check sheet are done each weekMaintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is always kept clean and laundered.Prioritise and organise your workload, referring to Line Manager as and when appropriateBe responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook.Agree to undertake all training offered that is necessary to maintain the skills required for this role.
Qualifications:
Full UK driving licenceSuccessful enhanced DBS checkGeneral workshop knowledgeBasic electrical knowledge including 12v/24v D.C. systemsAble to move and handle loads and equipment safelyExperience of face-to-face customer contact.Previous delivery driver experienceAn awareness and understanding of people with disabilitiesFlexible approach to working conditions and working environment change.Ability to use own initiative within set boundaries of the role.Ability to use a mobile phone to relay photographsGood written and verbal communication skills.Ability to relay clear instructions to clients.Awareness of hand-held scanners.
Physical demands of the job:
Moving and handling of equipment and accessories following handling guidelinesStanding at a bench to workKneeling/crouchingworking in confined workspace if the job necessitates (installing equipment in small toilet areas or bathrooms)Use of ramps and any other agreed moving equipment.
Most challenging/difficult part of the role:
Flexible working/responsive to changing priorities as set by Line Manager or Customer Service teamCommitting to being available for short notice overtime necessitated by emergency response requirementsResponsibility of out of hour’s duties.
Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company’s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatmentEqual Opportunities:Ross Care will be an equal opportunities employer. Its aim will be to ensure that neither applicants nor employees receive less favourable treatment on the grounds of sex, marital status, disability, religion, creed, colour, race, nationality, ethnic origins or social background, or are disadvantaged by conditions or requirements that cannot be shown to be justifiable.Please apply for the Field Service Engineer role with your updated CV. PLEASE NOTE THIS ROLE HAS PREVIOUSLY BEEN ADVERTISED. PLEASE DO NOT APPLY AGAIN AS YOUR DETAILS HAVE ALREADY BEEN CONSIDERED. INDHS ....Read more...
Our partner are growing their national team of Marine Electronics Technicians and Engineers, to be based at various sites in the UK (eg. Portsmouth, Hull, Liverpool, Chelmsford, Lowestoft)
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
- Essential: Full UK driving licence
- Medical: Must be able to pass a medical and annual working at height training
- Right to Work: Applicants must have the legal right to work in the UK. Sponsorship is not currently available.
Whats On Offer:
- Competitive salary
- Company car
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.....Read more...
Assisting with and learning about all aspects of the installation and commissioning of Wilcomatic Equipment, to include
Installation, maintenance and repairs of jet vacuums
Installation, maintenance and repair of air/water tower equipment
Jet wash system installation, maintenance and repair
Automatic car wash system installation, maintenance and repair
Commercial vehicle wash system installation maintenance and repair
The role is remote and will involve working on garage forecourts on a variety of different mechanical systems.Training:
In-field training with an experienced engineer and day release at Wigan & Leigh College at their Pagefield Campus
Training Outcome:
Permanent position guaranteed at successful completion of apprenticeship.
Employer Description:Wilcomatic has been in operation since 1967 and has operations in the UK & India. We work across numerous markets including; car wash, truck and bus wash, rail wash and heavy industrial washing of commercial and military vehicles. We have 60 + service personnel who maintain our washing fleet 24/7Working Hours :Monday to Friday 8am - 5pmSkills: Customer care skills,Problem solving skills,Analytical skills,Team working,Initiative....Read more...
Controls Hardware and Logic: Apprentices be required to select, install, configure and update control hardware platforms from manufacturers in the UK Market
Field Devices: Apprentices will be required to understand the principles behind control and performance of sensors, valves, actuators, dampers, variable speed drives, switches and relays
Networking: Apprentices will be required to design, install, maintain and fault find different types of networks along with more specialist sub-networks
Communication Protocols: Apprentices will be trained to a high level in the common open standard protocols in widespread use within the BEMS industry
Supervisor Software: Apprentices will gain a knowledge of the construction of graphics, creation of user accounts, alarm management and schedule management
This apprenticeship will involve working alongside our engineers on-site on various projects
To be committed to achieving the necessary qualifications
To complete a programme of training to be conducted within the Company’s various departments
Observe, learn and understand a wide range of skills and processes while under the instruction of skilled technical staff
To show commitment in developing practical skills and undertaking tasks as instructed, increasing overall contribution to the individual departments
To show enthusiasm and actively participate in a personal development plan
To increase overall knowledge of the industry
Understand and adhere to the Company’s internal procedures and regulations, including Health & Safety and Quality Assurance
Training:This Apprenticeship will take up to 36-months to complete and at the end, you will be awarded a Building Energy Management Systems (BEMS) Controls Engineer Apprenticeship Level 4 which is equivalent to a Foundation Degree.
Attend classroom and/or online learning sessions to undertake the Building Energy Management Systems (BEMS) Controls Engineer apprenticeship. This will include the Building Controls Industry Association (BCIA) technical course modules BCM00 - BCM15 and functional skills elements (including Maths and English where required).Training Outcome:The career progression opportunities are to become a fully qualified BEMS Engineer in Commissioning, Applications or Project Management. Employer Description:Established for well over 100 years, the Sauter Group is an international market-leader in developing, manufacturing and marketing energy-efficient solutions in Building Management Systems. With innovative technology, in the form of cloud-based solutions, APPs and smart devices, we provide solutions to meet the needs of our client’s in the control of their building systems.Working Hours :Monday to Thursday, between 8:30am to 5pm and Friday, 8:30am to 4:30pm.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
AOV Service Engineer – London (SE1)Location: London SE1Salary: £40,000 – £47,000 + Company Van + Bonus + Benefits CBW Staffing Solutions are currently recruiting on behalf of a leading name in the fire safety sector, who are seeking an experienced and motivated AOV Service Engineer to join their expanding team in London. With over 35 years of industry expertise and a reputation for excellence, this is a brilliant opportunity to join a well-established business that’s growing year-on-year. The Opportunity: You will play a key role in delivering high-quality servicing, maintenance, and fault diagnosis of AOV (Automatic Opening Vent) systems across a variety of residential and commercial properties. The successful candidate will ensure critical life safety systems are fully operational, compliant, and aligned with industry regulations. This is a field-based role offering autonomy, variety, and the chance to be part of a supportive and forward-thinking team, with access to genuine career progression and development opportunities. Key Responsibilities:Carry out service, maintenance, and repairs on AOV and smoke ventilation systemsDiagnose system faults and perform necessary repairs or component replacementsEnsure all work is compliant with BS5839, BS5266, and BS7671 standardsParticipate in a 1-in-4 out-of-hours call-out rotaMaintain accurate reports, timesheets, and documentationLiaise professionally with building/property managers and internal teamsSupport reactive maintenance and project delivery when requiredKey Requirements:Proven experience with AOV systems and associated componentsStrong working knowledge of smoke control systems, dampers, inverters, and detection devicesExcellent fault-finding and problem-solving abilitiesIT literate with good reporting and communication skillsAbility to work independently and manage workload effectivelyCalm under pressure with a professional appearance and attitudeFull UK Driving Licence is essentialElectrical engineering background highly desirableStrong understanding of BS5839 and BS7436What’s On Offer:Basic salary between £40,000 – £47,000 (depending on experience)Monthly performance-based bonus schemeFully equipped company vanMobile phone, uniform, PPE, tools, and testing equipment providedPrivate medical insuranceOvertime opportunitiesA chance to join a reputable business with long-term growth and development prospectsInterested?If you're a skilled AOV Engineer looking to take the next step in your career, apply now to speak with the CBW team and learn more about this exciting opportunity with a recognised industry leader.....Read more...
DevOps Engineer – Global Engineering Company - Berlin (Remote)(Tech Stack: Kubernetes, AWS, Azure DevOps, GCP, Jenkins, Docker, GIT, CI/CD Pipelines, Linux)
Client:Our client, a well-known international renewable energy engineering company is seeking a talented DevOps Engineer to join its team in Berlin.
Our Client has over 10,000 employees worldwide and it leads the field in developing innovative solutions that harness the power of the sun, wind, and water. Due to a recent round of funding, they need three DevOps engineers to help design, deploy, and maintain its cloud infrastructure and DevOps processes.
If you are seeking exciting projects contributing to a sustainable future and an opportunity to work with the latest technologies this is the job for you!
Benefits:
Competitive salary: €70,000 - €95,000 + Bonus Benefits
Opportunity to work on exciting projects that drive positive change
Remote work options with flexible working hours
Comprehensive benefits package, including health insurance, retirement plan, and more
30 Days Annual Leave
Responsibilities:
Collaborate with development and quality assurance teams to develop, modify, and maintain our cloud infrastructure and DevOps processes
Implement and maintain automated CI/CD pipelines to ensure smooth deployment of microservices in test and production environments
Use Infrastructure-as-Code and GitOps technologies to maintain our Kubernetes clusters and infrastructure
Support the team in maintaining legacy applications hosted in Azure
(Familiarity with most of the following technologies: CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Requirements:
Strong knowledge of CI/CD tools (GitHub Actions, Jenkins, Bitbucket Pipelines, Azure DevOps, etc.) and version management tools (git)
Experience with public cloud environments (Azure, AWS, or GCP)
Knowledge of container technologies (Docker, Kubernetes, etc.) and Linux systems
Understanding of Infrastructure-as-Code (Terraform/OpenTofu, Ansible, etc.) and GitOps (e.g. Flux) technologies
(CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Fluent in English & German
Location: Berlin (Remote)
NOIRGERMANYRECNOIREUROPERECNOIREURNET
NC/TC/CLOBER7095....Read more...
Are you a mechanical engineer with a passion for innovation, rugged electronics, and delivering real-world solutions? An exciting opportunity has opened for a Senior Mechanical Engineer to join a high-performing Hardware team focused on the development of advanced video and imaging processing products. This role is central to designing and delivering mechanical and thermal solutions for ruggedised, high-performance computing systems used in demanding environments.
What You\'ll Be Doing:
- Take ownership of mechanical and thermal design for rugged computer and video tracking products.
- Use SolidWorks 3D CAD software to develop enclosure and packaging designs.
- Lead mechanical engineering activities within small, multidisciplinary project teams.
- Perform engineering analyses including stress, fatigue, thermal, and vibration assessments.
- Conduct lab testing for design verification and validation.
- Produce detailed engineering reports for product design, failure investigations, and technical documentation.
- Collaborate with electronic and systems engineers to integrate components and subsystems.
- Maintain accurate engineering documentation including BOMs, ECRs, and design data.
- Support production, test, and field teams through design handover and troubleshooting.
- Work closely with project managers and sales teams to estimate and deliver on project goals.
- Assist with technical input for proposals, bids, and customer documentation.
What You\'ll Bring: Essential:
- A degree in Mechanical Engineering.
- Proficiency in SolidWorks 3D CAD.
- Experience designing enclosures for electronic equipment.
- A strong foundation in mechanical principles and a creative mindset.
- Demonstrated experience across the full product development lifecycle.
- Understanding of DFM, machining, casting, moulding, and fabrication techniques.
- Excellent communication and collaboration skills.
- Ability to lead technical work and deliver to deadlines.
Desirable:
- Experience designing for harsh or rugged environments.
- Background in defence, scientific equipment, or specialist machinery.
- Familiarity with document control systems (e.g., Dassault 3DEXPERIENCE).
- Skilled in engineering calculations and Microsoft Office tools.
Benefits & Perks:
- Flexible hybrid working options
- 28 days annual leave + holiday purchase scheme
- Friday lunchtime finish
- Group pension with matched contributions
- Income protection and life assurance
- Remote GP, mental health support, and physiotherapy services
- Share incentive plans and EV salary sacrifice
- Employee rewards platform and social events
- Onsite parking and wellbeing initiatives
- Training and development opportunities
Additional Information: Due to the nature of the work, all candidates must be eligible to obtain UK Security Clearance. This includes proof of identity, right to work in the UK, and five years of UK residency.
Ready to make an impact with cutting-edge hardware in a high-performance environment? Apply today and help shape the future of rugged technology.....Read more...
Senior Electronics Engineer – Medical Devices Invention – Warwick
A growing Medical Devices company are currently seeking an experienced Electronics Engineer to contribute to the invention and development of brand-new Medical Devices. Based in the Warwick area, you will be involved in developing cutting-edge technologies.
Working alongside physicists, mechanical engineers, scientists, and other Medical Devices experts, you will be involved in creating lifesaving and life-improving Medical Devices.
You should have a background in designing and developing Medical Devices to ISO 13485, IEC 62304, and EN 60601 standards.
It would be beneficial if you have experience on various types of Medical Devices during your career, such as Medical Robotics, Wearable Diagnostics, Injectable Treatment and other complex Medical Devices with electronics design at the core of the technology.
To be successful in the role, it is expected that you would hold a degree in electronics, physics, or other subject that enabled you to work on the electronics design of medical devices.
In addition to working on the latest areas of Medical Devices and Healthcare Technology, you will also be rewarded with an excellent starting salary, bonus, pension, healthcare, and other outstanding benefits that are not typically available with most companies.
This is an exciting role where you can focus on new types of Medical Devices, so I anticipate a lot of interest. If you are interested, I suggest you submit an application now or risk missing out.
You will be on-site five days a week; hybrid or remote working is not currently possible.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Biotech recruitment specialists Newton Colmore, on +44 121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
Learning how to install, maintain, and repair key power and cooling systems.
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and Power back supply.
Supporting experienced engineers to keep BT’s network up and running – ensuring the UK stays connected.
Traveling to different sites to keep our critical infrastructure in top condition.
Training:The apprentice training course:
As a Lead Engineering Maintenance Technician, you’ll study for a Level 4 apprenticeship with Stoke College
You will be required to attend the College on a block release
Monday lunchtime to Friday lunchtime
There will be approximately 10 blocks per year
Training Outcome:On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches.There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities. Alternatively, there are other roles with specialism in power policy and support.Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hrs Monday- FridaySkills: Communication skills,Organisation skills,Logical,Team working....Read more...
Learning how to install, maintain, and repair key power and cooling systems
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and Power back supply
Supporting experienced engineers to keep BT’s network up and running – ensuring the UK stays connected
Traveling to different sites to keep our critical infrastructure in top condition
Training:
As a Lead Engineering Maintenance Technician, you’ll study for a Level 4 apprenticeship with Stoke College
You will be required to attend the College on a block release, Monday lunchtime to Friday lunchtime
There will be approximately 10 blocks per year
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities
Alternatively, there are other roles with specialism in power policy and support
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :Monday- Friday, Shifts Be confirmed.Skills: Communication skills,Organisation skills,Logical,Team working....Read more...
Learning how to install, maintain, and repair key power and cooling systems.
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply.
Supporting experienced engineers to keep BT’s network up and running – ensuring the UK stays connected.
Travelling to different sites to keep our critical infrastructure in top condition.
Training:The apprentice training course: As a Lead Engineering Maintenance Technician, you’ll study for a Level 4 apprenticeship with Stoke College. You will be required to attend college on a block release, Monday lunchtime to Friday lunchtime. There will be approximately 10 blocks per year. Training Outcome:On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches.
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities.
Alternatively, there are other roles with specialism in power policy and support. Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hrs, Monday- Friday, times to be confirmed.Skills: Communication skills,Organisation skills,Logical,Team working....Read more...
Role Climate17 are working alongside well-established, UK-based, asset management firm who specialise in the entire project lifecycle, from origination through to operations of renewable energy and power gen assets. The BESS Field Service Engineer will perform planned and preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. Responsibilities Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance worksPerform system software and firmware upgradesMonitor operation performance monitoring and data assessmentProvide phone support and remote diagnostics to customersTroubleshoot equipment located at BESS sitesManage spare partsResponsible for safety work complying with local safety regulations and safety standardsConduct risk assessment and implement safety measuresKeep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service tripsAssist the in-house system engineering group in product development and/or project workProvide suggestions based on field experience, to improve the products Requirements: Qualification in an electrical/ electro-mechanical disciplineECS Gold Card - EssentialPrevious electrical or multi skilled maintenance experienceBasic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)Qualification of working on Site safelyThis role involves travelling to different sites. Overnight stay or international travel may be requiredWorking experience with BESS - preferredWorking knowledge of HV/LV power electronics including inverters / converters / Transformers - preferredPrevious HVAC training and F-Gas qualification - preferredStrong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols - preferredC&G2391-5 Test & Inspect or equivalent - preferredFamiliar with BS7671 - preferredHV authorised person - preferred Location: Field based, Bristol region About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know.....Read more...
