Role & responsibilities:
Operate horizontal twin pallet machining centres to machine large fabrications
Make necessary adjustments to the Machining parameters/ off sets etc. as with any repeat production requirements (not programme changes)
Make tool changes where required, using tool setting equipment and selection of correct cutting tips and adjustments
Ability to use gauges and measuring equipment for inspection purposes
Carry out process operations in accordance with Standard Operating Procedures, Quality in process inspection and Pre-delivery Inspection
Complete administration required for updating production control systems for job completion and inventory accuracy
Report all machining defects through our internal Concern Note process, to enable containment, correction and the review of root causes to implement preventative action
Carry out daily, weekly and monthly Operator Planned Maintenance Tasks
Ensure 5S standards are maintained daily and continuously improved in line with monthly audit actions
Be a committed team player with emphasis on flexibility, productivity and be focused continuous improvement
The above is not an exhaustive list of duties, and you will be expected to perform different tasks as necessitated by your changing role within the organisation and the overall business objectives of the organisation, this may include training and mentoring colleagues.Training:You will study on a Level 3 Machining Technician apprenticeship.
On completion of this, you will gain a qualification in Engineering at Level 3 Standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:
Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world
These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide
Employer Description:Niftylift is one of the largest mobile elevating work platform* (MEWP) manufacturers in Europe and sells its market-leading products worldwide. We specialise in compact, low-weight articulating booms that offer maximum performance with minimal environmental impact.
We use advanced 3D-modelling software together with rigorous testing to optimise every aspect of our product design and to ensure that every Niftylift work platform delivers outstanding performance without compromising on functionality or reliability.
With years of experience designing machines for the rental industry, we understand the importance of reliability, ease of operation, minimal maintenance, and excellent after-sales support to our customers.
Through investment in staff, manufacturing equipment and technology, we maintain an ongoing commitment to our customers to consistently produce high-quality innovative products that meet or exceed their expectations.
* Also known as cherry pickers.Working Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
Non-destructive testing (NDT) is an engineering science-based profession that requires competent Engineering Technicians to inspect materials, welds, components and plant to verify their integrity without rendering them unfit for further service. NDT is a useful background to many Asset Integrity Engineers and In-Service Inspectors for pressure and other systems.
Roles and responsibilities;
Plan and coordinate non-destructive technology (NDT) work to meet stakeholders’ requirements.
Test equipment, identifying faults and taking action as needed.
Establish resources required to ensure customer and site compliance against defined acceptance criteria. For example, accept all cracks to a certain length, and in a particular position, then report other findings in a technical report.
Receive, read, and interpret engineering data and documentation.
Assess the condition of the asset, component or material for compliance with stakeholders’ requirements acceptance criteria. Identify and fix issues with the asset, component or material, re-testing as needed. Report any defects and irregularities.
Collect NDT samples, record measurement points, monitoring intervals and operational state.
Conduct NDT testing and checks using testing, measuring or monitoring equipment on materials and components.
Inform stakeholders of work status and results. For example, internal and external customers.
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training Outcome:On completion of the apprenticeship, successful candidates could secure a role in a successful, dynamic company. The natural route to progression is one of a mechanical Statutory Inspector and/or an Asset Integrity Engineer.Employer Description:Tronox is the largest vertically integrated titanium dioxide producer in the world, the largest producer of merchant titanium chemicals, and the leading manufacturer of specialty titanium products. Tronox provides numerous products and services for a variety of industries around the world. From coatings to paper and polymers to pigments, our products and services are used to improve everyday life. Thousands of products in our world, from plastic bags to aerospace parts, get their start with help from Tronox. Tronox employ nearly 6,500 across six continents, and have a rich diversity, unmatched vertical integration model, and unparalleled operational and technical expertise across the value chain, position Tronox as the preeminent titanium dioxide producer in the world. We’re committed to our people, our customers, and our communities. With a broad global reach and deep local roots, Tronox embrace and celebrate the unique character and culture of every place they call home. From the west coast of Australia to the east coast of the U.S., from Europe to South Africa, and from mines to research and development labs, they bring the same passion to work in every location, everywhere, every day.Working Hours :Monday - Friday, 8.00am - 4.00pm (30 mins unpaid lunch).
Initially based at HETA and then on site.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Punctual....Read more...
We have a fantastic opportunity to join our leading, well-respected water technologies company, where you will play a pivotal role in the repair and maintenance of our products to a wide variety of clients and provide you with continuous training throughout your journey with us.
At Veolia Water Technologies UK, we are committed to ensuring you have the best experience possible and take your career to the next level!
The job requires a good understanding of work routines and procedures in one's own job. The technical procedures for this level are well-defined.
The job requires proficient knowledge of these procedures and how to apply them.
The knowledge can only be acquired through formal training or considerable experience.
To observe, abide by and enforce the company’s and client’s health and safety policies
Supporting the Service Engineers to carry out:
Breakdown work – troubleshooting /fault-finding
Preventative maintenance work for customers with service contracts
Commissioning work - involving the installation of new products
Timely reporting on progress or delays for customers
Timely completion and submission of risk assessments, work reports, time sheets and all other work-related documentation
Site tasks and activities as required
After-sales technical and commercial support to customers
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with us, which are fully paid for, including:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence)– off the job full time at Make UK in Aston, Birmingham in year 1
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)
Level 3 BTEC Diploma in Advanced Manufacturing Engineering (Development Knowledge)
In-house training in line with your requirements.
The role will be at a residential college during the first year and will be day release study time for one day per week in years 2-4. The apprentice should ensure all coursework is completed in a timely manner in order to attain a suitable qualification
Training Outcome:Service Engineer:
Providing onsite corrective/preventative maintenance at our customer sites
Completion and submission of assessments and work reports.
Ensuring that the organisation and the customers' health and safety standards are adhered to
Travelling to a variety of customers across a geographical region.
Providing feedback on product development
Employer Description:Join Veolia Water Technologies UK, a global company that's all about eco-friendly water tech. We're looking for passionate young minds to join our team as Apprentice Service Engineers!Working Hours :Year 1: Monday- Thursday, 8.00am - 4.30pm and Friday, 8.00am- 12.30pm.Skills: Commitment to the programme,Practically Minded,Problem solving skills....Read more...
We have a fantastic opportunity in the Manchester and surrounding areas to join our leading, well-respected water technologies company, where you will play a pivotal role in the repair and maintenance of our products to a wide variety of clients and provide you with continuous training throughout your journey with us.
At Veolia Water Technologies UK, we are committed to ensuring you have the best experience possible and take your career to the next level!
The job requires a good understanding of work routines and procedures in one's own job. The technical procedures for this level are well-defined.
The job requires proficient knowledge of these procedures and how to apply them.
The knowledge can only be acquired through formal training or considerable experience.
To observe, abide by and enforce the company’s and client’s health and safety policies
Supporting the Service Engineers to carry out:
Breakdown work – troubleshooting /fault-finding
Preventative maintenance work for customers with service contracts
Commissioning work - involving the installation of new products
Timely reporting on progress or delays for customers
Timely completion and submission of risk assessments, work reports, time sheets and all other work-related documentation
Site tasks and activities as required
After-sales technical and commercial support to customers
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with us, which are fully paid for, including:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence) – off the job full time at Make UK in Aston, Birmingham in year 1
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)
Level 3 BTEC Diploma in Advanced Manufacturing Engineering (Development Knowledge)
In-house training in line with your requirements.
The role will be at a residential college during the first year and will be day release study time for one day per week in years 2-4. The apprentice should ensure all coursework is completed in a timely manner in order to attain a suitable qualification
Training Outcome:Service Engineer:
Providing onsite corrective/preventative maintenance at our customer sites
Completion and submission of assessments and work reports.
Ensuring that the organisation and the customers' health and safety standards are adhered to
Travelling to a variety of customers across a geographical region.
Providing feedback on product development
Employer Description:Join Veolia Water Technologies UK, a global company that's all about eco-friendly water tech. We're looking for passionate young minds to join our team as Apprentice Service Engineers!Working Hours :Year 1: Monday - Thursday, 8.00am - 4.30pm and Friday, 8.00am - 12.30pm.Skills: Commitment to the programme,Practically Minded,Problem solving skills....Read more...
We have a fantastic opportunity in the Stoke on Trent and surrounding areas to join our leading, well-respected water technologies company, where you will play a pivotal role in the repair and maintenance of our products to a wide variety of clients and provide you with continuous training throughout your journey with us.
At Veolia Water Technologies UK, we are committed to ensuring you have the best experience possible and take your career to the next level!
The job requires a good understanding of work routines and procedures in one's own job. The technical procedures for this level are well-defined.
The job requires proficient knowledge of these procedures and how to apply them.
The knowledge can only be acquired through formal training or considerable experience.
To observe, abide by and enforce the company’s and client’s health and safety policies
Supporting the Service Engineers to carry out:
Breakdown work – troubleshooting /fault-finding
Preventative maintenance work for customers with service contracts
Commissioning work - involving the installation of new products
Timely reporting on progress or delays for customers
Timely completion and submission of risk assessments, work reports, time sheets and all other work-related documentation
Site tasks and activities as required
After-sales technical and commercial support to customers
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with us, which are fully paid for, including:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence) – off the job full time at Make UK in Aston, Birmingham in year 1
Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence)
Level 3 BTEC Diploma in Advanced Manufacturing Engineering (Development Knowledge)
In-house training in line with your requirements.
The role will be at a residential college during the first year and will be day release study time for one day per week in years 2-4. The apprentice should ensure all coursework is completed in a timely manner in order to attain a suitable qualification
Training Outcome:Service Engineer:
Providing onsite corrective/preventative maintenance at our customer sites
Completion and submission of assessments and work reports.
Ensuring that the organisation and the customers' health and safety standards are adhered to
Travelling to a variety of customers across a geographical region.
Providing feedback on product development
Employer Description:Join Veolia Water Technologies UK, a global company that's all about eco-friendly water tech. We're looking for passionate young minds to join our team as Apprentice Service Engineers!Working Hours :Year 1: Monday - Thursday, 8.00am - 4.30pm and Friday, 8.00am - 12.30pm.Skills: Commitment to the programme,Practically Minded,Problem solving skills....Read more...
A fantastic job opportunity has arisen for a Senior Manufacturing Engineer in East Sussex. My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives.
The role as the Senior Manufacturing Engineer in East Sussex will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards. You will also work to ensure the proposed design concepts can be manufactured cost-effectively. You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis). This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build.
The Senior Manufacturing Engineer must have experience with PCBA and leading a manufacturing or production team.
As the Senior Manufacturing Engineer in East Sussex, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable). You will also have an Engineering Degree or equivalent and provable experience in a similar position. Awareness of all types of electronic printed circuit assembly techniques is beneficial.
My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company.
APPLY NOW for the Senior Manufacturing Engineer East Sussex job, or to apply for similar jobs, by sending your CV to rwilcocks@redlinegroup.Com, otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810 or 079317 88834.....Read more...
CNC Turner vacancy available with a fast-growing, excitingly evolving sub-contract machining company that offers competitive annual salaries, 33 holidays, frequent overtime and the chance to work on high-end projects for various industries, including Military Aerospace, Oil & Gas, Medical Devices and Renewable Energy.
Following a recent change to their organizational structure, this employer is now experiencing an increased workload, in order to cope with this and maintain their service levels, this employer is actively searching for a fully skilled CNC Turner to join their team on a permanent basis.
For the CNC Turner position, we are actively searching for individuals who:
IDEAL NOT ESSENTIAL – Possess formal qualifications within Mechanical Engineering or Machining (Apprenticeship, NVQ/BTEC/City & Guilds Level 3, HNC, HND or equivalent)
Are Skilled Machinists with the ability to program CNC Lathes from scratch with any machine control or CAD/CAM software
Have the ability to work independently and capability of working directly from engineering drawings to complete Turning operations
Working Hours of the CNC Turner:
40 Per week spread across a day shift pattern
Monday to Thursday 07:00 to 15:00
Friday 07:00 to 12:00
Details of the CNC Turner position:
Annual Salary: Up to £36,192.00 (£17.40 per hour)
Overtime Frequently Available
Holiday Allowance: 33 Days including bank holidays
Statutory Pension Scheme
Company Bonus Scheme
To apply for the CNC Turner position, please click “Apply Now” and attach a copy of your updated CV. Alternatively, please contact Callum Good at E3 Recruitment for more information.....Read more...
Join a leading manufacturing company as an Maintenance Engineer. This is a fantastic opportunity for those looking to take the next step in their career. This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as a Maintenance Engineer.What’s in it for you as Maintenance Engineer
Salary: £46,000 per annum
Hours: Week1 - Monday - Friday- 5.30am-2pm // Week 2 - 1.30pm -10pm
Location: Ilkeston, Derby
Overtime - Paid at 1.5 and 2x
Benefits: Company pension contribution, work overalls washing service, Death in Service
Holidays: 31 days holiday increasing with one each year
Hours: 40 hour week
Training: Continued training and engineering development
Job Security: Grow within a market leader offering long-term career progression
Key Responsibilities of the Maintenance Engineer
Responsible for plant wide proactive and reactive Mechanical Maintenance activities to ensure the optimum performance of the factory.
Covering planned and reactive maintenance activities across manufacturing lines
Help to drive plant improvements and increased efficiencies
Identify and resolve recurring plant issues through engineering improvements (RCA)
Enhance plant reliability with best practices using CMMS
Required Experience & Qualifications needed as a Maintenance Engineer
You will need to hold the following Mechanical or Electrical Vocational and Technical qualifications to be considered: Time served Maintenance Engineer, City and Guilds Level 3, BTEC Level 3 or higher with NVQ Level 3, OR be Apprentice trained to level 3 or equivalent.
Strong planned and reactive Mechanical or Electrical maintenance experience within a manufacturing environment as an Maintenance Engineer
....Read more...
Join a leading manufacturing company as an Maintenance Electrician, This is a fantastic opportunity for those looking to take the next step in their career. This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as a Maintenance Electrician.What’s in it for you as Maintenance Electrician;
Salary: £51,500 per annum
Hours: Week1 - Monday - Friday- 5.30am-2pm // Week 2 - 1.30pm -10pm
Location: Ilkeston, Derby
Overtime - Paid at 1.5 and 2x
Benefits: Company pension contribution, work overalls washing service, Death in Service
Holidays: 31 days holiday increasing with one each year
Hours: 40 hour week
Training: Continued training and engineering development
Job Security: Grow within a market leader offering long-term career progression
Key Responsibilities of the Maintenance Electrician;
Responsible for plant wide proactive and reactive Mechanical Maintenance activities to ensure the optimum performance of the factory.
Covering planned and reactive maintenance activities across manufacturing lines
Help to drive plant improvements and increased efficiencies
Identify and resolve recurring plant issues through engineering improvements (RCA)
Enhance plant reliability with best practices using CMMS
Required Experience & Qualifications needed as a Maintenance Electrician;
You will need to hold the following Mechanical or Electrical Vocational and Technical qualifications to be considered: Time served Maintenance Engineer, City and Guilds Level 3, BTEC Level 3 or higher with NVQ Level 3, OR be Apprentice trained to level 3 or equivalent.
Strong planned and reactive Mechanical or Electrical maintenance experience within a manufacturing environment as an Maintenance Engineer
....Read more...
This Multiskilled Maintenance Engineer role is working with a very successful international FMCG manufacturing business based close to the Knutsford area.
The role is days-based working Monday to Friday, and offers a salary of £43000 dependant on skills and experience. Premium overtime is also available, this role also offers fantastic opportunities for both personal development and top-level accredited training.
The role is working as part of a team providing ‘Hands-on’ mechanical and electrical maintenance to their manufacturing machinery, working on hydraulics, conveyors, gearboxes, shafts and bearings, Inverters.What’s in it for you as Multiskilled Maintenance Engineer:
Monday to Friday Days Only
£43000 basic salary
Accredited training and personal development
Industry leading employee benefits
The ability to join a leading manufacturing business that values its employees
Premium overtime available
Main Duties & Experience required for Multiskilled Maintenance Engineer:
Providing plant-wide maintenance service, departmental support, and mechanical repairs ensuring that all production targets are maintained.
Experience covering motors, drives, inverters, conveyors, gearbox’s, PLC’s etc
High degree of Health & Safety awareness.
Ability to fault find, repair, and provide solutions to problems.
To Be Successful as a Multiskilled Maintenance Engineer:
Due to the training and development opportunities, you will need to hold the following qualifications as a minimum to be considered: City and Guilds Level 3, NVQ Level 3, Advanced Modern Apprentice Trained etc in engineering
Maintenance Engineering experience is essential
Planned and reactive maintenance experience is essential
Fabrication and welding experience desired
If you are interested in this position, please apply now....Read more...
The Multi-Skilled Maintenance Engineer vacancy is working with a market leading Manufacturing firm in the Keele area. The position offers excellent opportunities for both training and career development and development. Fully automated site working with a market leading Manufacturing company earning £60,000 OTE.What’s in it for your as a Multi-Skilled Maintenance Engineer:
Hours of work – Days and Nights 4 on 4 off – 6:30am to 6:30pm
Salary – £54,000 per annum (Including Shift Allowance)
Location – Keele, Staffordshire
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension - Matched up to 15%
Employee Benefits Package Including Company Share Scheme
Training and career Development Opportunities
Life Insurance 4x Salary
Private Healthcare Plan
Main Duties & Responsibilities of Multi-Skilled Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained, maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Working with Hydraulics, Pneumatics, Conveyors and other core Mechanical Systems. Working with PLC’s, Motors, Safety Circuits and other Electrical Control Systems.
Experience and Qualifications Required for Multi-Skilled Maintenance Engineer:
Apprentice trained or experienced in similar positions or Mechanical or Electrical Engineering qualifications such as (C&G, ONC, NVQ 3, 18th Edition or equivalent is desirable)
High degree of Health & Safety awareness.
To apply for the Multi-Skilled Maintenance Engineer position, please click "Apply Now" and attach your most up to date CV. Alternatively, please contact Joe Quartley at E3 Recruitment for more information.....Read more...
A leading chemical manufacturer is seeking an EC&I Technician to join their Manchester site on a permanent basis. This role offers a competitive salary starting at £42,000 per annum along with an attractive benefits package including a double-figure employer pension contribution, free on-site parking, company part-subsidised private healthcare, and excellent holiday allowance.As an EC&I Technician, you will be responsible for the maintenance, fault finding, and repair of electrical, control, and instrumentation systems across a high-hazard COMAH chemical manufacturing facility. You will play a key role in ensuring the safe, reliable, and compliant operation of plant equipment through planned preventive maintenance, breakdown response, and support to ongoing improvement activities.Key Responsibilities:
Carry out planned, corrective, and breakdown maintenance on electrical systems across the site.
Work in full compliance with site permit-to-work systems.
Diagnose faults and troubleshoot issues across electrical and instrumentation equipment in hazardous areas.
Use the CMMS system to process work orders, record time, and support preventive maintenance planning.
Support improvement works and minor modifications in line with engineering and site standards.
Assist with wider engineering activities across the site as required.
Stand in for the E&I Coordinator during periods of absence when necessary.
Requirements:
Time-served Electrical / Instrument Maintenance Technician with demonstrable experience in a chemical manufacturing or similar high-hazard industrial environment.
NVQ Level 3 (or equivalent) in Electrical Installation or a related discipline.
18th Edition (BS 7671) qualified.
Strong diagnostic and fault-finding skills across electrical and instrumentation systems.
Good communication skills and the ability to prioritise work effectively.
Comfortable using computerised maintenance and management systems.
Please apply directly for further information regarding this EC&I Technician position.....Read more...
Permanent Engineering position with fantastic work life balance! Over £57000+ salary, plus OT opportunities, 8% matched pension with progression, development and training available. This role is working with a major internationally respected manufacturer who have multiple sites across the UK.
What’s on offer as a Multiskilled Maintenance Engineer:
Week 1 Days (Monday - Thursday) - 05:50 - 18:00
Week 2 Nights (Monday - Thursday) - 17:50 - 06:00
Week 3 Days (Wednesday, Thursday, Friday) 6:00 - 1800 and Saturday 6:00 15:00)
Salary of circa £57,000+
Pension match up to 8%
Extensive training and personal development programmes
Industry leading multinational business
The ability to work with a team of skilled engineers across maintenance and project engineering activities.
Key responsibilities of Multi Skilled Maintenance Engineer:
Responsible for Electrical and Mechanical breakdowns, fault finding & repairing manufacturing machinery – Process control Systems, conveyors, presses, extruders, hydraulics, pneumatics, motors, drives, invertors and safety circuits.
Implementing & supporting rapid breakdown fault finding & rectification.
Assisting with the focussed improvement team.
Experience with basic fault finding on PLCs
We would love to hear from those Multi Skilled Maintenance Engineers with the following:
Multi Skilled Maintenance Engineer experience, recognised multi skilled / electrical apprenticeship, City & Guilds, BTEC etc.
Ability to trouble shoot & repair equipment & machinery.
Experience of working within a maintenance capacity as a Mechanical or Electrical Engineer in a production environment
This position will suit Engineers from a Mechanical or Electrical background If this is of interest then please apply now.....Read more...
Are you looking for an Electronics Test Technician role based in Glasgow?
My client is looking for a handful of enthusiastic, inquisitive, and determined individuals who are looking for a challenging and fulfilling career to join our Repair team.
As part of a world-leading aerospace technology business is expanding its repair facility in Glasgow, you will be supporting major OEMs. Including those supplying Airbus and Boeing, trusted by more than 300 airlines worldwide, this organisation develops advanced systems that transform how aircraft data is collected, managed and utilised. You’ll be responsible for testing, diagnosing, and repairing complex electronic systems used across global aviation fleets, directly contributing to safety, performance, and operational efficiency.
The Key Responsibilities for this Electronics Test Technician Role based in Glasgow:
Set up and conduct tests on electronic equipment, components and prototypes
Analyse data to ensure full compliance with engineering and regulatory standards
Diagnose and repair faults in electronic assemblies and systems
Perform maintenance, updates, and upgrades where required
Maintain accurate repair/test documentation and produce detailed reports
What you need for this Electronics Test Technician Role based in Glasgow:
HNC/HND in Electronic Engineering or equivalent experience
Strong practical electronics knowledge with hands-on troubleshooting skills
Experience using electronic test equipment (oscilloscope, multimeter, PSU, function generator, etc.)
Skilled with soldering tools, hand tools, and basic workshop equipment
Excellent attention to detail, communication and analytical capability
My client is unable to offer a sponsorship, so UK working rights needed, you will need to be able to pass Baseline Security Clearance.
APPLY NOW: Please send your CV to KGraveney@redlinegroup.Com or if you have any questions regarding the role please call on 01582878817 or 07961158774. Please send your CV prior to calling.....Read more...
Holt Executive is actively partnered with a global Connectivity/ IT Provider to support a critical Project Manager - Connectivity/ IT hire.
Our partner is looking for an experienced project manager to manage the delivery of client projects from contract award through to deployment and operational handover.
As the Project Manager, you will be responsible for delivering integrated connectivity, communications, and IT solutions within agreed scope, schedule, quality, and cost parameters.
Key Responsibilities for the Project Manager - Connectivity/ IT:
- Manage end-to-end delivery of assigned projects, ensuring alignment with contractual obligations and business objectives.
- Develop and maintain detailed project plans, schedules, and risk registers.
- Monitor project scope, budget, and timelines, ensuring accurate reporting and proactive issue resolution.
- Coordinate cross-functional teams including engineering, operations, and support functions.
- Act as the primary point of contact for customers during project execution, maintaining clear and professional communication.
- Prepare and deliver regular project status reports to internal stakeholders and clients.
- Support risk identification and mitigation planning throughout the project lifecycle.
- Ensure accurate project accounting, including cost tracking and forecasting.
- Participate in project reviews and contribute to lessons learned for continuous improvement.
- Assist with pre-sales activities such as solution scoping and proposal input when required.
- Adhere to best practices in project management methodologies and documentation standards.
Key Experience required for the Project Manager - Connectivity/ IT:
- 3-5+ years of experience in project management, preferably in technical , IT or telecommunications environments.
- Strong understanding of project management principles and methodologies (Agile, Waterfall).
- Excellent communication and stakeholder management skills.
- Ability to manage multiple projects simultaneously in a fast-paced environment.
- Financial awareness and experience with project budgeting and cost control.
- Proficiency in project management tools (e.g., MS Project, Smartsheet, Jira).
- PMP, PRINCE2, or equivalent certification preferred.
- Bachelors degree in Engineering, IT, Business, or related field preferred.
Preferred Experience
- Familiarity with satellite communications, IT infrastructure, or telecommunications.
- Experience working in multi-regional or global project environments.....Read more...
The Maintenance Engineer vacancy is working with a market leading Manufacturing firm in the Keele area. The position offers excellent opportunities for both training and career development and development. Fully automated site working with a market leading Manufacturing company with premium overtime rates to enhance your earnings.What’s in it for your as a Maintenance Engineer:
Hours of work – Days and Nights 4 on 4 off – 6:30am to 6:30pm
Salary – £54,000 per annum (Including Shift Allowance)
Location – Keele, Staffordshire
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension - Matched up to 15%
Employee Benefits Package Including Company Share Scheme
Training and career Development Opportunities
Life Insurance 4x Salary
Private Healthcare Plan
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained, maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Working with Hydraulics, Pneumatics, Conveyors and other core Mechanical Systems. Working with PLC’s, Motors, Safety Circuits and other Electrical Control Systems.
Experience and Qualifications Required for Maintenance Engineer:
Apprentice trained or experienced in similar positions or Mechanical or Electrical Engineering qualifications such as (C&G, ONC, NVQ 3, 18th Edition or equivalent is desirable)
High degree of Health & Safety awareness.
To apply for the Maintenance Engineer position, please click "Apply Now" and attach your most up to date CV. Alternatively, please contact Joe Quartley at E3 Recruitment for more information.....Read more...
SIGNING ON BONUS - £500 from day1 , another £500 after 3months and a further £1500 after 6months, 15% total pension, overtime paid at a premium, bonus, job security and on-going development are just a few perks that the Electrical Engineer will receive whilst working for this growing manufacturing business. Due to organic growth, we are recruiting for an Electrical Engineer to join this well-established manufacturing organisation. The company is based at the heart of Glossop, Derbyshire offering easy access from surrounding towns and cities such as Barnsley, Buxton, Stalybridge, Stockport, and Sheffield. Working Hours of the Electrical Engineer :
Week 1 Mon, Tues, Fri, Sat, Sun 12hrs days.
Week 2 Wed, Thurs 12hrs days.
Week 3 Mon, Tues, Fri, Sat, Sun 12hr nights.
Week 4 Wed, Thurs 12hrs nights.
In return, the successful Electrical Engineer will receive :
Salary is £51000 per Annum +£2500 Signing on Bonus.
23 holidays plus Stats.
Private Health Care.
Workwear Provided.
Performance Bonus Schemes.
Ongoing development and training.
Ideally, the successful Electrical Engineer will have :
HNC Engineering Qualification/ Level 3 Trained.
Experience in fault diagnosis /repair/maintenance in a steelwork /heavy engineering environment.
Worked on Electrical Control Circuits and 3 phase power supplies.
Planned Preventative Maintenance.
Operated computerised maintenance systems to monitor and record work.
E3R are keen to see applications from candidates with experience as Electrical Engineers, who have carried out the installation, maintenance, testing, and repair of all equipment used within a manufacturing industry. To apply for this Electrical Engineer role, please click "Apply Now" and attach your most up-to date CV.
....Read more...
The Job:
The Company: Internal Sales Engineer
Cash rich, leading distributor of Control & Automation equipment who have excellent partnerships with leading manufacturers.
Looking to strengthen their customer contact team with the recruitment of a high calibre Internal Sales Engineer.
Offer manufacture training through a mixture of internal and external courses.
Opportunity to develop within the business, getting valuable experience in the automation sector.
The Role of the Internal Sales Engineer
Internal role working for a company who specialise in the distribution of automation components and systems.
Office based role M-F 08.30-17.00
Typically dealing with PLC’s, HMI’s and low voltage control gear.
Excellent customer service skills essential.
Supporting internal and external customers with orders and quotes.
Telephone and Email based role.
Deal with inbound enquiries using the internal database and excel.
This is a full-time role and is office based.
Benefits of the Internal Sales Engineer
£35k-£38k basic salary
£Bonus
Pension
25 Days Annual leave + 8 bank holidays – rising with length of service
Membership to a health and wellbeing cashback scheme
Life Assurance of 2 times salary
Benefits Package
The Ideal Person for the Internal Sales Engineer
Technically astute with knowledge of automation systems and components.
Electrical / Electronic engineering qualification.
Some sales experience would be a bonus.
Ability to learn new products and skills.
Strong communication skills.
Good IT skills.
Hard working, self-motivated, outgoing, confident, team player.
If you think the role of Internal Sales Engineer is for you, apply now!
Consultant: Darren Wrigley
Email: darrenw@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
An opportunity has arisen for a Senior Civil Engineer to join a well-established architectural practice specialising in residential and mixed-use projects, delivering services from concept and planning through to technical completion.
As a Senior Civil Engineer, you will lead and deliver civil engineering projects, managing client relationships and overseeing technical design work.
This full-time role offers a salary range of £40,000 - £60,000 (negotiable) and benefits. Candidates should have experience in FRAs (Flood Risk Assessments).
What we are looking for:
* Previously worked as a Civil Engineer, Civil Design Engineer, Drainage Engineer, Highways Engineer, Highway and Drainage Engineer or in a similar role.
* Possess 7 years of civil engineering experience.
* A Chartered Engineer or working towards Chartered status (assistance provided)
* Strong background in drainage design, including FRA and SUDS
* Highly skilled in MicroDrainage and working knowledge of Civil 3D
* Have highways design experience
* Proven ability to manage projects and supervise junior team members
* Confident in a client-facing capacity
What's on offer:
* Competitive salary
* Employee bonus scheme
* Supportive working environment
* Ongoing professional development and support
* Clear progression prospects for an ambitious individual
This is an excellent opportunity to join a respected consultancy with a strong project pipeline and genuine career progression.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Flood risk, Drainage, Highways, SUDS, FRA, Flood Risk Assessments, civil design, civil, engineer
....Read more...
Field Service Engineer - Automation
Are you a Field Service Engineer - Automation with experience working with Electromechanical machinery and control panels? If so, our client has an exciting new opportunity!
Company Overview: You will join the leading provider of load bank and test solutions. With operations in North America and the UK, they have been global leaders in load bank solutions for decades, offering outstanding quality and service. Their products play a crucial role in testing power generation equipment, ensuring reliability in critical applications such as data centres, OEMs, and rentals.
Responsibilities of this Field Service Engineer - Automation job based in Stamford:
Face to face support primarily in field-based settings with global travel.
Perform fault finding, testing, and troubleshooting on control panels and power generation equipment such as generators and UPS systems.
Utilise expertise in both electrical and mechanical systems, with a focus on electrical engineering.
Engage with customers to understand their needs and provide effective solutions.
Key requirements for this Field Service Engineer - Automation job in Stamford:
Minimum ONC level qualifications in electrical or mechanical engineering.
You must be able to travel worldwide regularly.
2+ years of relevant experience working in Fault Finding of Electrical products.
Proficiency in dealing with large control panels and power generation systems.
Excellent communication skills for interacting with customers.
Driving License is 100% needed.
Salary: £32,000 to £42,000, plus overtime and potential 5% annual bonus. Up to 7.5% company pension contribution.
This is a superb opportunity for someone who wants to travel globally for work! You will also have exciting career progression opportunities for management.
To apply for this Field Service Engineer - Automation job in Lincolnshire, please email NDrain@redlinegroup.Com or call Nick on 01582878828 / 07961158760....Read more...
Year 1- Based in Metalcraft training school & West Suffolk College (NCTC) gaining skills in machining, fitting and hand tools, fabrication, welding
Year 2- Specific training in core areas to develop skills - manual and CNC machining, fabrication, welding, inspection, product engineering
Year 3- More focus on skilled techniques developing skills in a workshop environment
Year 4- Working towards becoming a fully skilled operator, and improving competence in a workshop environment
Year 5- Improver year to fine-tune skills learned
Training:
Qualifcation gained: Level 3 standard qualification (A level)
Training will be carried out by West suffolk College at the North Cambs Training Centre located next to Metalcraft's site
Training will be on a day release basis
Training Outcome:
Apprentices can progress their career in any area of the business, whether this be shopfloor based (ie: team leader, etc) or office based roles
Many Metalcraft apprentices go on to further study ie: HNC and join our Engineering, inspection departments, etc.
Employer Description:Stainless Metalcraft manufacture equipment for some of the world’s most hazardous environments. Our broad expertise spans pressure vessels, vacuum vessels and cryogenic vessels for safety critical applications across, among others, sectors such as medical, research, big science, power generation, nuclear, oil & gas, petrochemical & water.
Metalcraft has received many awards including the Queens Award for Enterprise in 2020 and the Princess Royal training award in 2020 and 2023Working Hours :Years 1 & 2: Monday to Thursday 8.00am-4.30pm (lunch break 12.30-1.00pm), Friday 8.00am-12.30pm.
Years 3-5: Monday to Thursday 7.30am-4.30pm (lunch break 12.30-1.00pm), Friday 7.30am-12.30pm.Skills: Communication skills,Attention to detail,Problem solving skills,Number skills,Team working....Read more...
Manual machine set up and operate such operations as Drilling, Tapping, Reaming and Graining
CNC Machine set up and operate such operations as cutting, bending, punching and insert installation
CNC Programming by creating precise digital instructions that tell computer‑controlled machines how to cut, shape, and manufacture components with accuracy and repeatability
Welding training in disciplines such as spot welding and stud welding, including MIG and TIG welding
Training Outcome:TBCEmployer Description:With over 30 years of specialist experience, Advanced Sheet Metal Engineering has built a strong reputation as a leader in the production of precision sheet metal solutions. Since opening its doors in 1992, the company has remained committed to combining traditional values—quality, service, and craftsmanship—with modern innovation, automation, and advanced engineering practices.
From day one, the company’s mission has been simple: to be the best and to provide the best service possible. To fulfil this vision, Advanced Sheet Metal has continually reinvested in state‑of‑the‑art machinery, leading‑edge technology, and the ongoing development of its people. This strategic commitment ensures exceptional levels of quality, reliability, repeatability, and competitive pricing, giving customers complete confidence in every project delivered.
As a fully certified ISO 9001:2015 organisation through BM TRADA, Advanced Sheet Metal maintains rigorous quality management standards across every area of the business. This accreditation underlines the company’s dedication to excellence and supports its long‑standing partnerships with clients across a wide range of sectors.Working Hours :Monday - Friday, 7:30am to 4:00pm (30min lunch break).Skills: Communication skills,Organisation skills,Problem solving skills,Initiative,Interpersonal skills,Hard Working,Rel....Read more...
Weld repairs & Fabrication works:
Repair known defects to the structures to comply to specification. Fabrication of new design requirements.
Health & safety :
Comply to all site applicable procedures.
Wearing of all required PPE.
An element of the role will require working at height on the
structures, from MEWPS and static elevated working platforms.
Reporting of incidents, accidents & close calls.
Reporting to construction manager.
Attend College as required.
Training:As part of your apprenticeship, you will be enrolled onto a Welder level 2 apprenticeship which will take approximately 21 months to complete. You will be fully supported by our partnered college to achieve this qualification, having 1-2-1 advice and support, e-learning materials, and a whole team of experts on hand for advice and technical knowledge at your office. Training Outcome:Permanent employment after completion of the apprenticeship.Employer Description:Amey is a leading infrastructure services and engineering company. Our 11,000 people are behind the critical services the country relies on every day and we each take personal pride in our public service. Our unique engineering and operations experience, together with data driven insight from our consulting business, delivers better results for our clients. We are trusted partners of Government – both national and local – managing assets and complex projects that are vital to the country.Working Hours :Monday - Friday 7:00 - 15:00, optional overtime weekend & Night work.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Analytical skills,Logical,Team working,Creative,Initiative,Physical fitness....Read more...
As a Commercial Apprentice join your every day will be different! One day, you will be assisting senior managers with the budgeting of construction projects, the next you might be assisting senior managers with the legal and contractual issues on a construction project.
Management and selection of contractors.
Measurement and valuation of progress of works
Administration of different types of contracts in the collection, collation, and storage of relevant data
Measurement of networks change and the associate valuation
Cost allocation and reconciliation
Training:As part of your apprenticeship, you will be enrolled onto a Construction Support Technician level 3 apprenticeship which will take approximately 27 months to complete. You will be fully supported by our partnered college to achieve this qualification, having 1-2-1 advice and support, e-learning materials, and a whole team of experts on hand for advice and technical knowledge at your office. Training Outcome:Throughout your programme, you will receive first-class mentoring and a structured learning and development programme to enable your professional and personal development. Employer Description:Amey is a leading infrastructure services and engineering company. Our 11,000 people are behind the critical services the country relies on every day and we each take personal pride in our public service. Our unique engineering and operations experience, together with data driven insight from our consulting business, delivers better results for our clients. We are trusted partners of Government – both national and local – managing assets and complex projects that are vital to the country.Working Hours :Monday - Friday 08:30 - 17:00.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
To get on this prestigious graduate programme we require a bachelor's degree in business or engineering (other relevant fields will also be considered). Please include your certificates in your application alongside your UK Driving licence.
As a Sales Graduate, you’ll:
Build relationships with clients and key decision-makers
Generate new business opportunities
Develop a deep understanding of industry trends and market changes
Work alongside experienced sales professionals to maximize growth
Master the art of cross-selling, upselling, and white-spacing
Gain firsthand experience in sales strategy, customer engagement, and territory management
Training:How You’ll Learn :
Shadowing industry professionals to gain real-world experience
Learning about cutting-edge products and technology
Assisting in designing solutions, processing quotes, and managing projects
Collaborating with teams across the business, ensuring seamless service deliver
Training Outcome:
Upon completion of this apprenticeship there are many internal opportunities within the company
Many of our previous apprentices have become lead sellers or managers that take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :Monday to Friday. Inclusive of a lunch break directed by your manager. Hours may vary depending on customer and team requirements.Skills: Communication skills,IT skills,Attention to detail,Customer care skills,Presentation skills,Logical,Team working,Initiative....Read more...
