Attending morning briefings at the site to ensure works can be undertaken safely
Undertaking duties such as mixing, moving materials, assisting the experienced team with building works
Being set individual tasks on topics related to your apprenticeship including setting out, calculations, line and level, specifications along with practical activities within building
Taking progress photos of the works and utilising our project management software REFLOW to record daily operations
Being part of a team to complete plant and vehicle checks
Understanding the key principles of H&S including, RAMS, COSHH, construction phase plans, lift plans, permit to works, H&S inspections, pedestrian and traffic management etc.
Liaising with your site manager
Completing timesheets for your hours
Training:The successful apprentice will undertake a level 2 (Bricklayer) building NVQ which will include full-time working within the specified hours related to age.
The training will be completed on a 1-day per week release to Yeovil College predicted to be on a Friday, with on-the-job training provided as well as formal external training provided by our sister company Crestmoor Training. Training Outcome:Following successful completion of the apprenticeship the successful candidate will have various paths they could take within the industry, including more complex building courses, setting out and engineering through to management positions.Employer Description:Crestmoor Construction is an award with Civil Engineering and Construction business. We pride ourselves on the quality of our workmanship, attention to detail as well as delivering on programme with a key focus on health and safety. We work alongside large tier 1 contractors along with domestic Clients.Working Hours :Monday to Friday - 07.00 - 16.00 dependent on site and location.Skills: Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
You’ll learn how to service and repair machines and equipment
You’ll learn how to replace parts, check and calibrate instruments
You’ll also study everything from basic engineering skills to the latest technological advancements in electro-hydraulics and computerised control systems.
Training:As an apprentice, you will be enrolled in a blended learning programme where you will gain a Land-Based Service Engineering Technician Level 3 qualification at Reaseheath College. Through a mixture of on-the-job experience and block release training, our Apprenticeship Programme covers all the essential skills and principles you will need to become a Plant Mechanic.
The Apprenticeship will last 4 years, consisting of 3 years combined block release training at Reaseheath College and 1 year of in-house training.
You will spend 9 weeks per year at Reaseheath College learning all the necessary skills you will need to succeed. Your time at college will be split into 3x 3-week blocks and you will be required to attend college Monday-Friday during the set block. All transportation, accommodation and food will be provided. When you are not at college, you will be on-site gaining hands-on experience and knowledge from our expert fitters.Training Outcome:Once the apprentice has completed their 4-year service and qualified, they can progress within the company to a Workshop Fitter position. There are many avenues to take from here within the business, including progressing to Mobile Fitter, Workshop Foreman and even Depot Manager one day!Employer Description:Established in 1969, GAP Hire Solutions is the UK's leading independent equipment hire company. With 10 divisions and over 150 locations across the UK, we've got everything you need from dumpers, diggers and tools to track mats and portable toilets.Working Hours :Monday to Friday 8am to 5pm, no evening or weekend work required.Skills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Logical....Read more...
Shadowing a technician, you will be taken through the full scheduled maintenance procedures to ensure high production machine availability is maintained. On the occasion of a machine breakdown, this will be prioritised, and training will be given on fault finding techniques through to final repair and testing.
• Performing all tasks to EH&S standards (LOTO)• Work on small precision mechanical assemblies for machine adjustment and setup.• Use of basic workshop hand tools and measuring equipment.• Performing vacuum pump oil changes and consumables such as gas bottles, filters as required• Replacing, running air lines • Identify any machine improvements under our continuous improvement plan. • Assist engineering teams – cross departmental working. • Use the Computer Management System (CMS) on a daily basis to log and maintain machine records. • Working with production supervisor to maintain machine status. • Miscellaneous electrical sensor checks and adjustment. • Understand basic PLC operations.• Soldering and general workshop skills enhancement.• Leading to be able to diagnose and repair minor machine faults.Training:Level 3 B Tech in Engineering Northumberland College One day / week at college Four days hands on site.Training Outcome:Yes there is possible career progression in to the maintenance team as a qualified maintenance technician.Employer Description:TT Electronics is a global provider of design-led, advanced electronics technologies for performance critical applications in specialised markets.
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health
Working Hours :Mon – Thursday 8am – 4.30pm Friday 8am-1pmSkills: Administrative skills,Analytical skills,Attention to detail,Communication skills,Creative,Customer care skills,IT Skills,Logical,Organisation skills,Problem solving skills,Team Work....Read more...
Electrical or Mechanical Maintenance Engineer – City of London £50,000–£52,000 | Continental Shifts (Days & Nights) | 20 Shift Holidays | 7am–7pm / 7pm–7am We are currently seeking an experienced and proactive Electrical or Mechanical Maintenance Engineer to join a leading facilities team within a prestigious commercial site in the City of London. This is an excellent opportunity for someone looking to progress their career in a stable and rewarding environment. The Role: Working as part of a skilled engineering team, you will be responsible for:Carrying out planned preventive maintenance (PPM) and reactive works across the site.Diagnosing and repairing electrical or mechanical faults efficiently.Ensuring compliance with health & safety regulations and site procedures.Maintaining high standards in building performance and systems uptime.Supporting other team members and contractors when required.Shift Pattern:Continental Shift Pattern – 4 on, 4 off (days & nights)12-hour shifts: 7am–7pm / 7pm–7amIncludes 20 shift holidays per yearRequirements:Recognised qualifications in either Electrical or Mechanical Engineering (e.g., City & Guilds, NVQ, or equivalent)Proven experience in building services maintenance or critical environmentsStrong fault-finding skills and a hands-on approachExcellent communication and teamwork abilitiesPackage:Salary: £50,000–£52,000 per annum20 shift holidaysPension schemeTraining and development opportunitiesCareer progression within a respected companyApply today if you're ready to join a forward-thinking team in one of London’s top commercial environments or send your cv to Ben Miller at CBW staffing solutions ....Read more...
FM Technical Manager - Morpeth - Global Facilities Management OrganisationCBW Staffing Solutions are currently recruiting for an experienced Technical Manager to join our facilities management client’s team, based on site in Morpeth, Northumberland.The ideal candidate will bring a strong mechanical or electrical engineering background to provide expert leadership and technical oversight over the compliant delivery of hard FM services, supporting both reactive and planned maintenance while driving innovation, energy efficiency and compliance with statutory requirements.Package:Competitive salary between £47,000 - £49,000 per annumCore hours are Monday - Friday (37.5 hours per week) 25 days annual leave plus bank holidaysGenerous workplace pension schemePrivate health care & life insuranceTraining, development & progression opportunitiesResponsibilities:Provide technical leadership and support for M&E systems across multiple client sitesOversee the delivery of PPM and reactive maintenance, ensuring high standards of serviceLead and manage a team of engineers and subcontractors, ensuring effective performance and developmentEnsure full compliance with health & safety, statutory and contractual obligationsAct as the point of escalation for technical issues and lead resolution strategiesConduct audits, inspections and technical reviews of building systems and servicesCollaborate with project managers and other stakeholders on technical project delivery, upgrades and refurbishmentsIdentify and implement opportunities for service improvement and energy savings Requirements:City & Guilds NVQ Level 3 or equivalent in Mechanical or Electrical Engineering (essential)Relevant qualifications (e.g., IOSH/NEBOSH, HV/LV certification, etc.) are desirableProven experience in a technical management role within Facilities Management (essential)In-depth knowledge of building services systems (HVAC, electrical, BMS, etc.)Excellent leadership, communication, and stakeholder management skills Interested? Apply with a full & up to date CV or contact Aaron Rutter at CBW Staffing Solutions.....Read more...
NPI Engineer – Clinical Diagnostics
Newton Colmore is representing a medical devices company based in Cambridge, recognised as an industry leader in novel clinical diagnostics technology. This organisation has built a strong reputation for delivering life-changing healthcare solutions through engineering and manufacturing excellence.
Due to continued growth and expansion of their product portfolio, they are seeking an experienced NPI Engineer to join their manufacturing transfer team.
The Role
This is a great opportunity for an NPI engineer to play a pivotal role in bringing innovative medical devices from concept through to commercial production. You will be at the heart of new product introduction (NPI) activities, working closely with cross-functional teams to ensure seamless product launches.
Key Responsibilities
Design for Manufacturing (DfM) & Transfer:
Lead design for manufacturing initiatives, working collaboratively with R&D teams to improve product designs for efficient, scalable production
Drive technology transfer activities from development through to full-scale manufacturing
Develop and implement manufacturing strategies for new product introductions
Conduct manufacturing feasibility assessments and risk analyses
Process Development & Optimisation:
Design, develop and validate manufacturing processes for medical device production
Create detailed manufacturing procedures, work instructions and quality control protocols
Implement lean manufacturing principles and continuous improvement initiatives
Support scale-up activities from pilot production to commercial volumes
Cross-functional Collaboration:
Partner with quality assurance teams to ensure regulatory compliance throughout the manufacturing process
Work closely with supply chain and procurement teams on vendor qualification and component sourcing
Collaborate with project management teams to ensure timely delivery of NPI milestones
Essential Requirements
Ideally around five years in manufacturing engineering within a medical devices or biotechnology environment. Flexible for the right candidate.
Proven experience in design for manufacturing and new product introduction
Strong knowledge of manufacturing processes including machining, assembly, and quality control systems
Experience with manufacturing transfer projects and scale-up activities
Understanding of medical device regulations (ISO 13485, FDA QSR, MDR) is highly desirable
Proficiency in CAD software and manufacturing analysis tools
Strong project management and cross-functional collaboration skills
Ideally educated to degree level in a relevant subject.
What's On Offer
Competitive salary commensurate with experience – flexible from mid-level to senior.
Comprehensive benefits package including bonus, healthcare, pension, and much more.
Opportunity to work with complex medical technology that makes a real difference to patients
Professional development opportunities and career progression
Cooperative, innovative working environment with world-class engineering teams
Next Steps
This is a confidential search being conducted on behalf of our client. For a discrete, confidential discussion about this exceptional opportunity, please contact:
Matt Lowdon Founder 0121 268 2240 / hello @ newtoncolmore . com
All applications will be treated in the strictest confidence. Due to the confidential nature of this search, only shortlisted candidates will be contacted with full company details.
We are committed to equal opportunities and welcome applications from all qualified candidates regardless of background.
....Read more...
As a Mobile Plant Technician Apprentice, you'll be initially responsible for (but not limited to) the following:
· Assist and support technicians in the day-to-day tasks related to inspection, maintenance and repair of a
variety of mobile plant equipment (e.g. Forklift Truck, MEWPS & Site Vehicles);
· Fault find and repair any mechanically related problem;
· Develop practical skills in mechanical, hydraulic, pneumatic and electrical systems;
· Work safely and in line with written procedures, carrying out your own risk assessment before commencing work;
· Ensure compliance with environmental, health and safety, and legislative requirements at all times;
· Actively take part in any training requested to enhance your role;
· Learn to use relevant tools, equipment and technology correctly and safely;
· Accurately record tasks, service logs, and maintenance findings;
· Work as part of a team of engineers to ensure jobs are carried out in the safest and most efficient way;
· Maintaining a clean, organised and productive work environment.
You’ll develop your skills alongside highly qualified and experienced team members; who are passionate in passing on their knowledge, helping you learn a variety of duties and how to support the whole business. You’ll be mentored to achieve your full potential and create the foundation of a career in engineering.
If you have a good attitude to work, are committed and ready to take your first step into an exciting career with a fantastic employer, then please apply now! This apprenticeship and opportunity with AMG will be extremely competitive, so don’t miss your chance!Training:The successful candidates will continue their studies with apprenticeship specialists, RNN Group at their Worksop campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer. It is important that you can get to this location once per-week.
The Apprenticeship Standard you will be studying is Maintenance and Operations Engineering Technician – Level 3.Training Outcome:Further industry appropriate training where relevant.
A lifelong career in the engineering industry with AMG Chrome Ltd.Employer Description:AMG Chrome Limited, part of the AMG Critical Materials NV, is a world-renowned supplier of specialty metals, alloys and other materials into the super-alloy, aerospace, steel, hard-facing, welding and aluminium industries. We have a workforce of over 200 employees and have been manufacturing metals at our site in Rotherham, for over 80 years. AMG Chrome Limited has earned a trusted reputation for reliable manufacture and delivery of specialty metals, alloys and materials anywhere in the world.Working Hours :Monday – Friday 06:00 – 14:00Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Initiative,Good attitude to work,Work under pressure,Ability to prioritise workload....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
This is a technical Pre-Sale and post-sale support to silicone IP and System on chip / SoC simulation, verification and testing tools.
The successful candidate will work in chipset functional verification collaborations to resolve customer issues, support R&D technology.
You will work closely with the Sales team supporting technical sales campaigns and deliver training courses and workshops covering the Functional Verification Platforms.
Skills and experience
Experience of Hardware Design and Verification languages including Verilog, VHDL, System Verilog, System-C, TLM.
BEng in Electronic / Micro-Electronic Engineering or Computer Science ??? or equivalent
Experience of Verification environments such as UVM, System Verilog, System C, Specman/e, Metric/Coverage driven verification and Formal property checking.....Read more...
Electronic Instrument Test technician with good all round precision engineering electronic data acquisition, test validation and verification experience required to join a comprehensive in house test facility. Component and product, instrumentation, electronic / electrical testing experience ideally in a very practical precision design environment.
Key skills
Data acquisition system build and administration to experiment, collect data and calculate results.
Set up, configure data acquisitions system software, example NI DAQ, NI LabVIEW, DASYLab.
Instrumentation use including:
Pressure sensors
Accelerometers
Flow meters
Loadcells
Thermocouples.
Cable layout and installation route cabling
Soldering skills at connector and PCB level
Digital multi meter (DMM) and oscilloscope knowledge.
Environmental testing.
Inverters, 3 phase motors and programmable Logic controller knowledge.
....Read more...
Manufacturing equipment Services Sales Executive required to continue post capital equipment sales client relationships and identify opportunities to increase revenue from existing engineering, aerospace, pharmaceutical and manufacturing clients.
Requirements
Technical sales experience of capital equipment, Measuring Instruments, material testing or related to Automotive, Aerospace, Construction, Medical, Electronics, Bio Tech, Pharmaceutical, Textile, Oil and Gas, Research institutions or similar industries.
Full clean UK driving license, role will include 60% UK travel.
Understand profitable and sustainable service products.
Ability to understand and sell technical service products, negotiate contracts, manage accounts, build relationships and when needed prospect.
Responsibilities
Collaboratively internal Customer Experience team to understand clients needs to present best solutions.
Develop accounts, run review meetings and up sell services.
....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
This is a technical Pre-Sale and post-sale support to silicone IP and System on chip / SoC simulation, verification and testing tools.
The successful candidate will work in chipset functional verification collaborations to resolve customer issues, support R&D technology.
You will work closely with the Sales team supporting technical sales campaigns and deliver training courses and workshops covering the Functional Verification Platforms.
Skills and experience
Experience of Hardware Design and Verification languages including Verilog, VHDL, System Verilog, System-C, TLM.
BEng in Electronic / Micro-Electronic Engineering or Computer Science ??? or equivalent
Experience of Verification environments such as UVM, System Verilog, System C, Specman/e, Metric/Coverage driven verification and Formal property checking.....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
Electronic Instrument Test technician with good all round precision engineering electronic data acquisition, test validation and verification experience required to join a comprehensive in house test facility. Component and product, instrumentation, electronic / electrical testing experience ideally in a very practical precision design environment.
Key skills
Data acquisition system build and administration to experiment, collect data and calculate results.
Set up, configure data acquisitions system software, example NI DAQ, NI LabVIEW, DASYLab.
Instrumentation use including:
Pressure sensors
Accelerometers
Flow meters
Loadcells
Thermocouples.
Cable layout and installation route cabling
Soldering skills at connector and PCB level
Digital multi meter (DMM) and oscilloscope knowledge.
Environmental testing.
Inverters, 3 phase motors and programmable Logic controller knowledge.
....Read more...
We are seeking a highly experienced Systems Design Engineer, based in Brackley who has deep expertise in mixed-signal hardware design and embedded C programming. Our client is a leading designer and manufacturer specialising in prototype development and custom PCB assembly.
This is a multidisciplinary role ideal for a senior engineer who thrives in a hands-on technical environment, integrating analogue and digital circuit design with real-time embedded software to deliver robust, scalable solutions.
Key Responsibilities for the Systems Design Engineer job based in Brackley;
Lead the architecture, design, and development of mixed-signal electronic systems (analogue/digital interfaces, microcontrollers, sensors, power management).
Develop and debug embedded software in C for real-time control, data acquisition, and communication tasks.
Design PCBs using industry-standard tools (e.G., Altium, KiCad, OrCAD), including schematic capture, layout reviews, and BOM generation.
Perform system-level integration, verification, and validation across hardware and software components.
Collaborate with cross-functional teams (mechanical, firmware, software, test) to define requirements and ensure seamless system integration.
Conduct design reviews, FMEA, and documentation for regulatory and manufacturing compliance (e.G., CE, EMC).
Skills & Experience needed for the Systems Design Engineer job based in Brackley;
Degree in Electronic Engineering, Computer Engineering, or related discipline.
Extensive experience in electronic system design with a strong focus on mixed-signal electronics and embedded C.
Proficiency in embedded C for bare-metal or RTOS-based systems (e.G., ARM Cortex-M, STM32, MSP430, etc.).
Experience designing analogue front-ends (ADC, op-amps, filters), power supplies (LDOs, switching regulators), and digital buses (I2C, SPI, UART, CAN).
Strong debugging skills using tools like oscilloscopes, logic analysers, and JTAG/SWD debuggers.
Solid understanding of PCB layout principles for signal integrity, EMC/EMI, and thermal considerations.
Desirable:
Experience with low-power embedded systems, sensor interfacing, or wireless comms (e.G., BLE, LoRa, Zigbee).
To apply for this Systems Deign Engineer job based in Brackley, please call Nicola King on 01582 878 839 / 07961 158788 or your CV to nking@redlinegroup.Com for a confidential discussion.....Read more...
DevOps Engineer – Global Engineering Company - Berlin (Remote)(Tech Stack: Kubernetes, AWS, Azure DevOps, GCP, Jenkins, Docker, GIT, CI/CD Pipelines, Linux)
Client:Our client, a well-known international renewable energy engineering company is seeking a talented DevOps Engineer to join its team in Berlin.
Our Client has over 10,000 employees worldwide and it leads the field in developing innovative solutions that harness the power of the sun, wind, and water. Due to a recent round of funding, they need three DevOps engineers to help design, deploy, and maintain its cloud infrastructure and DevOps processes.
If you are seeking exciting projects contributing to a sustainable future and an opportunity to work with the latest technologies this is the job for you!
Benefits:
Competitive salary: €70,000 - €95,000 + Bonus Benefits
Opportunity to work on exciting projects that drive positive change
Remote work options with flexible working hours
Comprehensive benefits package, including health insurance, retirement plan, and more
30 Days Annual Leave
Responsibilities:
Collaborate with development and quality assurance teams to develop, modify, and maintain our cloud infrastructure and DevOps processes
Implement and maintain automated CI/CD pipelines to ensure smooth deployment of microservices in test and production environments
Use Infrastructure-as-Code and GitOps technologies to maintain our Kubernetes clusters and infrastructure
Support the team in maintaining legacy applications hosted in Azure
(Familiarity with most of the following technologies: CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Requirements:
Strong knowledge of CI/CD tools (GitHub Actions, Jenkins, Bitbucket Pipelines, Azure DevOps, etc.) and version management tools (git)
Experience with public cloud environments (Azure, AWS, or GCP)
Knowledge of container technologies (Docker, Kubernetes, etc.) and Linux systems
Understanding of Infrastructure-as-Code (Terraform/OpenTofu, Ansible, etc.) and GitOps (e.g. Flux) technologies
(CI/CD, GitHub, Jenkins, Bitbucket Pipelines, Azure DevOps, GIT, Docker, Kubernetes, Linux)
Fluent in English & German
Location: Berlin (Remote)
NOIRGERMANYRECNOIREUROPERECNOIREURNET
NC/TC/CLOBER7095....Read more...
We are currently recruiting for a Automation and Controls Engineer to join a market leading FMCG manufacturing company working at their Heavily Automated site in Goole. It is a days-based role with a salary paying up to £52,000, complemented by a high benefits package, including a company pension contribution, a discretionary bonus and life assurance scheme. What’s in it for you as an Automation and Controls Engineer
A Salary of circa £52,000
3 x Life assurance Scheme
Monday –; Friday working hours
33 days holiday
Overtime Paid at 1.5x
Enhanced Company Pension
Annual KPI Driven Bonus
Genuine career development and progression
Responsibility for the Automation and Controls Engineer
Focussing on developing and maintaining automated control systems including, programming, Inverters, PLC’s and SCADA systems.
Making sure all Controls and Electrical assets are maintained in compliance with the company’s requirements within the health, safety and site standards.
Oversee all C&E work (projects and shutdowns, or other) safely and efficiently within the allocated time and budget.
Working alongside the Engineering Team across manufacturing excellence, looking at CI and Root cause analysis
Useful experience for the Automation and Controls Engineer
Qualifications in a relevant discipline (HNC/D Level in C&E Engineering or processes an equivalent qualification)
Working with Siemens S5, S7 and TIA
Knowledge and understanding of PLCs and Inverters for programming and fault finding
Aware of Computer Maintenance Management Systems (CMMS)
Being able to perform at the highest level within a dynamic environment and embrace change
We are in search of an Automation and Controls Engineer with a strong maintenance background within a manufacturing environment to be able to be proactive in problem solving and achieving outcomes to meet ethical business practise.Please apply directly for further information regarding the Automation and Controls Engineer role.....Read more...
Role: Maintenance Team Manager (Mechanical)
Location: Birmingham
Salary: £Competitive + Company Bonus & Benefits inc free Healthcare, On-site gym, subsidised lunch, EAP schemes, financial assistance, etc
Hours: 8 am-4:30 pm Monday-Friday
Our client is a well-established manufacturer with a strong focus on continuous improvement, reliability, and health/safety. They foster a culture that values the development of staff and processes.
As the Maintenance Team Manager, you will play a crucial role in leading a team of engineers to achieve exceptional results aligned with the company's vision and values. Your focus will be on improving processes, equipment, and working practices to ensure consistent and effective mechanical maintenance programs that maximise production uptime safely and professionally.
Responsibilities:
- Lead and manage a team of engineers, fostering high performance and personal development
- Develop and implement consistent and effective maintenance programs to maximise production uptime
- Ensure compliance with health and safety regulations and lead weekly team meetings
- Plan, monitor, and evaluate shutdown, project, and normal maintenance plans
- Identify and communicate maintenance resource requirements (spares, people, special tools)
- Track team KPIs, contribute to shut improvement cycles, and ensure high engineer utilisation
- Develop and document preventive maintenance programs using reliability-based techniques
- Manage CMMS and systems, including audits, reporting, and continuous improvement
- Manage budgets, raise purchase order requisitions, and identify continuous contract and fixed spend
Requirements:
- HNC/HND engineering qualification
- Mechanical engineering
- Strong manufacturing background
- Leading a team of engineers
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit. If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page. This does not need to be formatted in the same manner. In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word. Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy. KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
33 Holidays, Frequent Work Events/Socials and State-Of-The-Art-Facilities are just a few of the benefits that the Graduate Buyer will enjoy whilst working with this impressive engineering organisation. Established over 100 years ago, this impressive engineering organisation has become a vital partner to their high profile clientele. Operating out of a state-of-the-art manufacturing facility, they currently employ over 120 people and produce bespoke high-end products for use in a variety of industries and types of facilities. This employer is based in LEEDS, meaning that the successful Graduate Buyer will easily be able to commute from surrounding towns and cities including Bradford, Dewsbury, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Bingley and Keighley. Key Responsibilities of the Graduate Buyer will include:
Assist in the purchasing of materials for the manufacturing and assembly of goods
Support in progressing orders with items ordered from UK and overseas suppliers
Produce weekly updates on delivery and forecasts
Ensure ERP systems are up-to-date with regards to expected delivery dates and accurate pricing
Develop and maintain relationships with existing and new suppliers
For the Graduate Buyer, we are keen to receive applications from individuals who possess:
Recent graduation with a BSc in Logistics, Procurement and Supply Chain or similar
Good communication and negotiation skills
Ability and willingness to learn
Salary and benefits:
Up to £25,000 (depending on experience)
Flexible working hours (37.5 Hours per week)
Monday to Thursday – 08:15am to 17:00pm
Friday - 08:15am to 12:45pm
33 days Annual Leave including Bank Holidays
8% Combined Pension
To apply for the Graduate Buyer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
Data Engineer – Investment Banking – London/ Hybrid
(Data Engineer, SQL Data Engineer, Java, Python, Spark, Scala, SQL, Snowflake, OO programming, Snowflake, Databricks, Data Fabric, design patterns, SOLID principles, ETL, Unit testing, NUnit, MSTest, Junit, Microservices Architecture, Continuous Integration, Azure DevOps, AWS, Jenkins, Agile, Data Engineer, SQL Data Engineer)
We have several fantastic new roles including a Data Engineer position to join a growing global financial giant. This is your chance to work for one of the most ambitious companies headquartered in London! They are growing at lightning pace and hiring across several teams to join their new and growing IT team! They are looking for an experienced Lead Data Engineer with expert level Java/Python, as well as Snowflake/ Databricks to join an exceptional core engineering team and deliver features across their Data Engineering platform.
We are seeking a Data Engineer who has advanced working knowledge of Snowflake/Databricks and Java/Python, as well as experience with Microservices Architecture and Continuous Integration. Exposure to NUnit, MSTest and Junit would be beneficial, along with knowledge of ETL, Azure DevOps, AWS, and Jenkins.
There is a vast amount of knowledge and experience within the business to share with the right person, so the right attitude, cultural fit, collaboration, problem solving and communication skills are just as if not more important.
We are keen to hear from talented Data Engineers candidates from a financial services background.
This is an amazing opportunity to work for a prestigious brand that will do wonders for your career. They invest heavily in training and career development; top performers will have career path into senior leadership and/or architectural positions ahead of them.
Location: London / Hybrid
Salary: £60K - £95k + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
To apply for this position please send your CV to Sunny Bhalla at Noir Consulting.
NOIRUKTECHREC
NOIRUKREC....Read more...
Position: Coppersmith / Pipefitter (Marine)
Job ID: 936/280
Location: Helensburgh
Rate/Salary: £32.00 per hour (all hours inc. OT)
Type: Contract (12 weeks initially, likely extension)
HSB Technical Ltd is a leading specialist recruiter operating across the Power & Propulsion, Shipbuilding, Shipping & Energy, and Aerospace sectors. With a wide range of permanent and contract opportunities available both in the UK and internationally, we pride ourselves on connecting skilled professionals with reputable clients. To learn more about us and our current vacancies, please visit our website or connect with us on LinkedIn.
We are currently recruiting 2 x Coppersmiths / Pipefitters for a dayshift contract position with one of our key marine industry clients. This is a great opportunity to join a skilled team supporting a high-profile shipbuilding or vessel maintenance environment.
Key Responsibilities for the Coppersmith / Pipefitter:
•Carry out copper and general pipefitting works on marine vessels and components
•Install, maintain and repair pipe systems and related fittings across a variety of sizes and materials (e.g., copper, stainless steel, mild steel)
•Work from detailed engineering drawings, isometric and schematic layouts
•Pressure test, flush, and inspect systems in line with QA requirements
•Collaborate closely with welders, mechanical fitters, and project supervisors
•Maintain safe working practices and adhere to HSE standards on site
•General fabrication and repair duties where required
•Support ad hoc tasks to assist the day shift team as needed
Essential Skills & Qualifications of the Coppersmith / Pipefitter:
•Proven experience in a marine or shipbuilding environment (highly desirable)
•Strong background in copper pipework installation and/or repair
•Ability to interpret technical drawings and work independently
•NVQ Level 3 or equivalent in Pipefitting or Mechanical Engineering (preferred)
•Comfortable using a variety of hand tools and equipment
•Familiarity with MOD, commercial or offshore vessel standards (advantageous)
•Reliable, flexible, and a proactive team player
•Eligibility to work in the UK
Contract Details:
•Start Date: August 2025
•Duration: 12-week initial contract, with potential for extension based on internal recruitment and project needs
•Shift Pattern: Dayshift (Monday to Thursday)
•Rate: £32.00 per hour (umbrella / LTD – all hours paid including OT)....Read more...
Scientific Sales Manager – Drug Discovery Tools
Newton Colmore is working with an exciting biotech company in Cambridge who are looking to hire a Sales Manager to lead the commercialisation of their latest drug discovery tool.
As a Sales Manager in this growing company, you will be utilising your molecular biology or biochemistry expertise and sales acumen to identify and win new customers. This is a pivotal role for the company, and you will be responsible for building a new sales strategy, attending industry events, building new relationships and engaging with key stakeholders.
The company have developed a new desktop tool that aims to speed up and improve drug discovery outcomes with novel technology that is at the intersection of science and engineering.
You will be utilising your scientific commercial experience to interact directly with potential customers and to help them understand more about the technology and how it can improve their discovery capabilities.
To be considered for this exciting role you will need to have the following;
Prior sales experience, ideally within a drug discovery setting.
Biology or Biochemistry academics.
Some knowledge of bioprocessing or protein assays would be ideal.
Be a great communicator and enjoy travelling with work (around 30%).
The company are offering competitive salaries coupled with a strong benefits package as well as excellent growth opportunities in a fast-growing company. They will provide you with all the tools you need to make this role a success. Share options are also available.
The company have created a hierarchy-free environment that fosters innovation and progress, meaning you can make a real difference with your ideas.
This is an opportunity not to be missed so make an application now. For more details speak with Matthew Lowdon, medical devices recruitment specialist at Newton Colmore Consulting on 0121 268 2240.
Newton Colmore Consulting is a specialist recruitment consultancy operating within the medical devices and scientific engineering sectors. We conduct bespoke searches for our clients across the globe. We are continually running searches across R&D so take a look at our open roles on our website.
....Read more...
Director of Engineering – Southern Germany | €55,000 – €60,000I’m working with a well-established hospitality business in Southern Germany that’s looking for a Director of Engineering (m/f/d) to lead their technical operations team. This is a senior role overseeing all facilities, maintenance, and compliance on site, reporting directly to the General Manager.
Key Details:
Location: Southern GermanySalary: €55,000 – €60,000 per yearSchedule: Full-time, 5 days/week, with rotating weekend duty (every 3rd or 4th Saturday)Team: Leading a team of 2–3 engineersReports to: General Manager
Your Responsibilities:
Ensure the smooth, compliant operation of all technical systems and infrastructureOversee FLS (Fire Life Safety) procedures and liaise with the GM on safety mattersDeliver cost-effective, high-quality maintenance across the propertyLead, train, and develop a technical team; support younger team membersMaintain excellent relationships with external providers and regulatory bodiesAlign technical operations with company CSR and sustainability guidelines
Your Background:
Completed technical qualification or degree in building services, facility management, or similarSignificant experience in a comparable role (hospitality or building operations preferred)Strong knowledge of technical compliance, fire safety, and preventative maintenanceTeam leadership experience and a proactive, structured working styleFluent in German (minimum C1 level)
If you are interested, please reach out to Clay at COREcruitment – clay@corecruitment.com.....Read more...
Are you an experienced Programme Manager with a passion for leading complex, high-impact projects within the defence or aerospace sector? Were looking for a driven and strategic Programme Manager to take ownership of a key customer-facing programme within the Land sector. This is a pivotal opportunity to shape the success of multiple international projects from design through to delivery.
About the Role:
Reporting to the Land Programme Manager, you will oversee a programme comprising several concurrent projects, each at different stages of their lifecycle. Your leadership will ensure successful planning, execution and stakeholder engagement, all while aligning with commercial objectives and ensuring robust risk and resource management.
Key Responsibilities:
- Lead and coordinate multiple projects within a major Land sector programme
- Ensure integrated planning, risk management and resourcing across departments
- Drive delivery against profit, revenue and growth targets
- Participate in bid and proposal planning, estimating PM labour, and scheduling
- Launch and oversee R&D and customer contracts from inception to closure
- Liaise with engineering and functional leads to ensure technical and resource alignment
- Provide high-level project board communication and strategic stakeholder engagement
- Manage reporting on financials (revenue, cash-flow, margin forecasts, etc.)
- Mentor and support project managers while overseeing PM staffing needs
What Were Looking For:
Essential:
- Proven experience managing international defence/aerospace programmes
- Strong commercial acumen and stakeholder engagement skills
- Recognised project management qualification (e.g. PRINCE2, PMP, APM)
- Experience leading high-performing teams in a fast-paced, collaborative setting
- Engineering background and understanding of complex systems
- Willingness to travel domestically and internationally
Desirable:
- Degree in business, project management, or a related field
Personal Attributes:
- Analytical and strategic thinker with strong leadership skills
- Resilient, adaptable, and solutions-oriented
- Collaborative team player with excellent interpersonal skills
- Demonstrates values of Teamwork, Integrity, Excellence, and Courage
Whats on Offer:
- Hybrid / flexible working arrangements
- Early finish on Fridays
- 28 days annual leave + Christmas closure + holiday purchase scheme
- Group pension plan (matched up to 5%)
- Income protection & life assurance
- Remote GP access, mental health support, physiotherapy services
- EV salary sacrifice scheme
- Discounts on gym memberships, high street retailers, and more
- Access to learning & development resources
- Onsite free parking
Security Requirements: Due to the nature of the role, candidates must be eligible to obtain UK Security Clearance. This includes proof of identity, right to work in the UK, and five years of UK residency.....Read more...
