This role is focused on designing, developing and testing complex electronic hardware from initial concept through to manufacture. You will work hands-on with analogue and digital electronics, PCB design, hardware testing and verification, while working closely with engineering and manufacturing teams throughout the product lifecycle.
The ideal candidate will have strong practical experience in electronics design and PCB development, with knowledge of areas such as high-speed digital design, FPGA and VHDL, Embedded C, MATLAB or RF being highly advantageous.
Key Responsibilities
Design and develop analogue and high-speed digital electronics.
Design and review multilayer PCBs, including signal integrity.
Produce schematics and PCB layouts using Altium or OrCAD.
Work with FPGAs, VHDL and Embedded C and hardware and software interfaces.
Support RF electronics and associated interfaces.
Carry out hardware testing, verification and troubleshooting.
Take products through the full lifecycle from design and development to testing and manufacture.
Key Requirements
Strong commercial experience in electronics and hardware design.
Hands-on experience with PCB design and schematic capture.
Experience with Altium or OrCAD.
Good understanding of analogue and digital electronics.
Experience with hardware testing and verification.
Experience with FPGA and VHDL, Embedded C, MATLAB or RF would be highly advantageous.
Electronics or Electrical Engineering degree or equivalent.....Read more...
A job as a Supplier Quality Engineer has arisen in Aldershot, Hampshire.
An exciting new job has arisen for a Supplier Quality Engineer, based in Aldershot, Hampshire to work for a premium distributor of electrical / electronic connector solutions who specialise in the predominately the automotive sector.
The Supplier Quality Engineer, located in Aldershot, Hampshire will play a pivotal role in supporting the management and improvement of supplier quality performance. This is a development role looking a candidates with exposure to automotive IATF or ISO9001 standards and a good understanding of root cause analysis methodologies.
The ideal Supplier Quality Engineer, based in Aldershot, Hampshire will have experience in supplier onboarding practices, along with monitoring supplier performance metrics and contributing to supplier development plans.
This job opportunity is for a company that has a diverse product range supplying into the automotive, aerospace and Oil & Gas industries and pride themselves on unrivalled levels of customer service.
APPLY NOW! For the Supplier Quality Engineer job, located Aldershot, Hampshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878 848 quoting ref. THD1403. Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 848.....Read more...
Are you looking a Electrical Design Engineer role based in Colchester, Essex working for a global leading engineering business?
If so, my client is currently recruiting for a Electrical Design Engineer to join a pioneer in in advanced automated capital equipment manufacturers for X_Ray and Bond Testing equipment.
As an Electrical Design Engineer, you will be responsible for the electrical design and testing of new x-ray and bond testing products.
Requirements for Electrical Design Engineer position;
Electrical design of panels and industrial systems such as circuit breakers, contactors etc. As well as wiring looms
CAD experience, preferably AutoCAD / Inventor
Knowledge of electrical safety standards such as IEC61010 / NPA79
This is a fantastic opportunity to join a world leader in their industry offering excellent career prospects. Their Colchester, Essex based Research and Development team work directly with some of the largest semiconductor and electronic manufacturing companies in the world, to help solve their reliability challenges.
APPLY NOW! For the Electrical Design Engineer job, located Colchester, Essex by sending a CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878 848 quoting ref. THD1417. Otherwise, we always welcome the opportunity to discuss other roles similar to Engineering jobs on 01582 878 848.....Read more...
Are you a Mechanical Design Engineer looking for your next challenge? My client has an exciting opportunity for a talented engineer to join their growing engineering team, working on the design and development of complex electromechanical products and systems.
This is a hands-on role where you will be involved in the full mechanical design process, producing innovative design solutions and supporting projects from concept through to manufacture.
In this Mechanical Design Engineer 013; Creo role based in Newcastle upon Tyne, you will be responsible for the following:
Designing mechanical components, enclosures and electromechanical assemblies using Creo.
Producing accurate 3D models, 2D manufacturing drawings and Bills of Materials (BOMs).
Working closely with multidisciplinary engineering teams to support product development and continuous design improvements.
The successful applicant for this Mechanical Design Engineer – Creo job based in Newcastle upon Tyne should have:
Experience designing electromechanical products, electronic enclosures or complex engineered assemblies.
Proficiency using Creo (or a similar 3D CAD package) to produce detailed engineering drawings.
An HNC/HND, Degree or equivalent qualification in Mechanical Engineering or a related discipline.
To apply for this Mechanical Design Engineer – Creo job based in Newcastle upon Tyne, please send your CV to NDrain@redlinegroup.Com or call Nick on 01582 878828 for more information.....Read more...
We are partnered with a global engineering business in Chelmsford, Essex, developing advanced electronic systems used across aerospace, medical, and industrial applications. As production demand continues to grow, they are looking for a Production Engineer to support manufacturing, improve processes, and help transition new designs into stable, repeatable production.
In this Production Engineer role, you will:
Support manufacturing and test activities, resolving technical issues on the line
Carry out fault finding and root cause analysis to improve product performance
Drive practical improvements to processes, cost, and manufacturability
Support new product introduction, making sure designs are ready for efficient, scalable build
The ideal Production Engineer will have:
Experience supporting manufacturing in an electromechanical or electronics environment
A hands-on approach to problem solving, with strong fault-finding skills
Understanding of manufacturing processes and design for manufacture principles
An engineering degree or equivalent industry experience
This is a strong opportunity to join a well-established engineering team based in Chelmsford, Essex, working on complex, high-reliability products, with the chance to influence how they are built and improved over time.
To apply for this Production Engineer role in Chelmsford, Essex, apply now! For more information, email Ricky at rwilcocks@redlinegroup.Com or call on 01582 878810.....Read more...
An excellent opportunity has arisen for a Senior Quality Engineer, based in Bedford, Bedfordshire, to work for a leading Electronics Manufacturing provider supplying to a range of mission critical environments such as the aerospace and motorsport sectors.
The Senior Quality Engineer, Bedford, Bedfordshire, will be responsible for providing expert support through quality processes to meet the highest customer standards with the Aerospace sector. You will ensure that compliance with both customer and quality management system standards is upheld.
The ideal candidate for the Senior Quality Engineer, Bedford, Bedfordshire will have;
Previous experience working in a relatable manufacturing environment, ideally with Electronic Manufacturing
Experience with Aerospace AS9100 Quality Management Systems
Knowledge of IPC Standards
The Senior Quality Engineer, Bedford, Bedfordshire, will have;
Proven experience in quality engineering, quality assurance, or customer quality management.
Strong understanding of quality management systems.
Experience with Quality audits.
This is a fantastic time to join a highly successful, industry leader in their field that offers an abundance of development and career progression.
APPLY NOW for the Senior Quality Engineer, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref. THD1409. Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 848.....Read more...
What you’ll do at work:
To provide a confidential, efficient and effective service to patients of the practice, always ensuring that patients and visitors are in no doubt that the practice is a provider of quality service in all that we do.
Main Duties:
Booking, cancelling and revising appointments for patients for a variety of healthcare professionals within the health centre
Registering patient arrivals within the health centre
Answering the telephone, transferring calls and taking messages
Taking enquiries and requests for repeat medication from patients
Keeping the waiting area a safe environment for all users
Dealing with incoming and outgoing post
Filing patient notes (both electronic and paper)
Dealing with new and temporary patient registrations
Ensuring all letters and samples are ready for courier collection
Updating patient demographic changes on the system
Liaise with other support services when needed
Any other reasonable duties
Training:Business Administrator Level 3.Training Outcome:Full-time post following completion of the apprenticeship programme.Employer Description:Moseley Medical Centre is a UK GP practice providing family health services, including advice, vaccinations, prescriptions, and treatment.Working Hours :Monday - Friday, between 8am-5pm.Skills: Communication Skills,Customer care skills,Non judgemental,Organisation skills,Patience,Team working....Read more...
JOB DESCRIPTION
The Euclid Chemical Company is seeking an experienced Admixture Product Manager to lead the strategy, development, and commercialization of our concrete chemical admixture portfolio. This role is responsible for driving product lifecycle management, market positioning, and profitability of plasticizers, superplasticizers, accelerators, retarders, air-entraining agents, water reducers, and specialty admixtures used in ready-mix, precast, and infrastructure applications. The successful candidate will serve as the primary interface between R&D, technical service, sales, marketing, and customers to deliver high-performance, value-added solutions that meet evolving construction industry demands. The Admixture Product Manager is expected to demonstrate an enthusiastic commitment to providing industry-leading service and support to internal and external Euclid Chemical customers. They should also be dedicated to personal growth in product knowledge and industry experience.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Provide service and support for the Euclid Chemical admixture product lines • Assist in product troubleshooting by proactively coordinating testing and analysis activities between sales representatives, customers, Product Managers, R&D/product development, and operations.• Assist in the development of next generation sales tools such as product comparative guides, certification letters, product calculators, concrete mix design tools etc.; formats include paper-based, web-based, and/or electronic tools.• Actively participate and complete tasks efficiently within the company's Corporate Initiatives• Interact as a reliable peer especially to product managers and assistants, marketing communication staff, sales representatives, customer service, business development, R&D/product development, and the operations group.• Lead new product development projects from concept through commercialization in close collaboration with R&D, manufacturing, and regulatory teams; manage stage-gate processes and prioritization. • Monitor product performance, quality, and profitability; recommend portfolio rationalization or line extensions as needed.• Track regulatory developments (ASTM, EN, local standards) and ensure products remain compliant; support certification and approval processes.• Maintain electronic product technical files.• Help plan and provide product training and demonstrations to organization/customers. • Occasional travel to construction jobsites or customer locations to provide product support and travel to participate in industry and Trade organizations/associations may be required.
REQUIRED QUALIFICATIONS
• Bachelor's degree in, Chemical Engineering, Materials Science, Civil Engineering, Marketing or a closely related field • 5+ years of progressive experience in product management, technical sales, or application development within construction chemicals, concrete admixtures, or related specialty chemicals.• Solid understanding of concrete technology, mix design principles, and the functional chemistry of admixtures (polycarboxylate ethers, lignosulfonates, etc.).• Proven track record of successfully launching or managing industrial chemical products and driving revenue growth.• Strong commercial acumen with experience in pricing, value selling, and competitive positioning.• Excellent project management, communication, and cross-functional leadership skills.• Willingness to travel (approximately 15-30%) to customer sites, plants, and industry events.
PREFERRED QUALIFICATIONS
• Direct experience with ready-mix or precast concrete producers.• Knowledge of sustainability trends (CO₂ reduction, recycled materials, low-clinker cements) and how admixtures support them.• Understanding of the use of concrete admixtures, fiber reinforcement, testing of materials and/or concrete technology is desired.
EDUCATION AND EXPERIENCE
• 4-year Bachelor of Sciences/Engineering or concrete technology related experience/education.• Understanding of the use of concrete admixtures, fiber reinforcement, testing of materials and/or concrete technology is desired.
Why join our team? Euclid Chemical offers an attractive package for full time personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage
Life Insurance, Disability, Parental Leave
401k with company match
Defined benefit pension plan
Generous vacation and holiday time
Employee Stock Purchase Plan
Life Insurance
SALARY: $75,000 - $90,000 plus annual bonus program based on % of salary (determined by education and experience)Apply for this ad Online!....Read more...
JOB DESCRIPTION
As our Control Systems Tech, you're there to apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or laboratory environments by repairing, testing, adjusting, or installing electronic equipment, such as industrial controls, circuit boards, and switches; and reprogramming CNC and PLC controls.
Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting-edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here is what you can expect:
Maintain current electrician's license or identification card to meet governmental regulations.
Connect wires to circuit breakers, transformers, or other components.
Repair or replace wiring, equipment, and fixtures, using hand tools and power tools
Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
Operate and maintain high and low-pressure boilers
Operation and maintain air cooled chillers.
Operate various air handling systems, including process
Perform preventative maintenance on various systems
Perform air balance calculation on air handling systems
Diagnosis and troubleshoot
Steam Boiler systems
HVAC systems
Process Ventilation and ControlsRust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
High school diploma or GED certificate
Certified experience in HVAC and or Boiler Operation.
5 years experience in pipe fitting, welding and fabrication.
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
Shift: 6am -6:15 pm; 2-2-3 shift rotation
Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
This is a Non-Exempt position. Salary Range: $31.58 - $42.68Apply for this ad Online!....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels. Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected. The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT....Read more...
The Redline Group is working with a specialist engineering and manufacturing organisation to support their search for a Contract NPI Engineer - Electro Mechanical. We are looking for someone who is available to start as soon as possible and can be onsite full time in Fareham, Hampshire.
Our customer designs and manufactures specialist electronic and computing solutions used in demanding environments. Due to ongoing product development activity, they require an experienced Contract NPI Engineer to support the validation and introduction of new products into manufacturing.
The successful Contract NPI Engineer will be responsible for managing NPI activities from prototype and pilot build stages through to manufacturing release. This will include developing work instructions, supporting prototype builds, creating tooling and fixtures, validating manufacturing processes, and working closely with engineering, quality and production teams.
Key Skills Required – Contract NPI Engineer - Electro Mechanical:
Proven experience in New Product Introduction (NPI) within an electro-mechanical manufacturing environment
Experience taking products from prototype or pilot build through to manufacturing release
Strong electro-mechanical assembly, testing and troubleshooting experience
Experience producing manufacturing documentation including work instructions, tooling and process documentation
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
For more information or to apply for the Contract NPI Engineer - Electro Mechanical opportunity based in Fareham, Hampshire, please contact Maddie Ramsden on MRamsden@RedlineGroup.Com or 01582 878815 quoting reference MMR1071....Read more...
We are recruiting for a Trainee Fire Systems Tester / Technician to join a field-based life safety team covering customer sites across London and the Home Counties. Full training will be provided, so previous fire industry experience is not required.You will be supported by an experienced engineering team while developing your knowledge of fire safety systems and testing procedures. This full-time role offers a salary range of £22,000 - £27,000 and benefits.
Key Responsibilities? Carry out routine testing of fire, AOV and emergency lighting systems.
? Record testing results and job information accurately using a PDA.
? Provide professional customer service both on site and by telephone.
? Maintain equipment and van stock while working safely and efficiently.
? Work towards operational KPIs and support colleagues as required.
? Perform other duties as required as part of the role.
About You? Practical, logical and methodical, with an organised approach to your work.
? Good communication and customer service skills, with a professional and presentable manner.
? Able to complete tasks efficiently and accurately, including electronic records and paperwork.
? Comfortable using initiative and thinking practically when dealing with tasks or problems.
? Good knowledge of London and Home Counties postcodes.
? Reliable, punctual and able to work consistently to expected standards.
? Able to support colleagues and lead by example when required.
Relevant backgrounds may include trainee technician, junior technician, engineering trainee, technical assistant or similar roles
? Trainee Technician, Trainee Engineer, Trainee Engineering Technician, Trainee Maintenance Technician, Trainee Field Technician, Trainee Service Technician, Junior Technician, Junior Engineer, Junior Engineering Technician, Engineering Trainee, Technical Trainee, Engineering Assistant, Technical Assistant, Apprentice Technician, Apprentice Engineer
Health & Safety? Follow co....Read more...
We are partnered with a growing product development business in Newbury, Berkshire, designing and developing innovative electronic products for customers across a range of industries.
As part of their continued growth, they are looking for an experienced Audio Electronics Engineer to join their engineering team, working across the full product development lifecycle from initial concept and design through to prototyping, testing and production.
In this Audio Electronics Engineer role, you will:
Design and develop analogue and digital electronics, with a focus on audio applications
Take designs through schematic capture, PCB development, prototyping and testing
Carry out hardware debugging, fault finding and performance analysis
Work closely with other engineers to develop, test and improve products through to production
The ideal Audio Electronics Engineer will have:
Commercial, hands-on experience in electronics product development
Proven experience designing audio electronics, ideally including analogue signal paths, amplifiers, codecs or ADCs and DACs
Strong schematic and PCB design skills using Altium or similar
Experience with embedded systems, microcontrollers and digital communication interfaces
This is an excellent opportunity to join a growing engineering team working on a varied range of product development projects. You'll have the opportunity to take ownership of your designs, work across different stages of development and develop your technical skills alongside experienced engineers.
The role is site-based in Newbury, Berkshire.
If you're interested in this Audio Electronics Engineer role in Newbury, Berkshire, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information.....Read more...
Principal Power Electronics Engineer
My client has recently made a new opportunity available for a Principal Power Electronics Engineer to join their multi-skilled R&D team based in Tyne & Wear, North East England.
This company develops high-performance permanent magnet electric motors and generators used across a variety of sectors, including Rail, Energy and Power.
My client is a technology business with diverse interests across the rail, defence and energy industries, where it is recognised for developing innovative, leading-edge technologies. They have a truly global footprint, with facilities in nearly every developed economy and a portfolio of high-value, high-profile technology projects.
The successful candidate for the Tyne & Wear based Principal Power Electronics Engineer role will:
Be degree educated in Electronic Engineering or a related discipline.
Have significant experience in the design and development of analogue power electronics.
Have proven experience designing SMPS, AC/DC and DC/DC power conversion systems.
Have experience working within the Rail, Energy, Transport or other highly regulated industrial sectors.
Be capable of providing technical leadership, mentoring engineers and driving complex power electronics projects from concept through to production.
As well as offering excellent career progression opportunities, my client provides a highly competitive package, including up to in relocation support, which can be used towards a wide range of moving expenses, including household appliances and furnishings.
For further information regarding this Principal Power Electronics Engineer opportunity based in Tyne & Wear, North East England, please email an up-to-date CV to ndrain@redlinegroup.Com....Read more...
An exciting job opportunity has arisen for a Principal RF Design Engineer based in Norwich, Norfolk to join the market leader involved within an exciting technology sector.
Due to continued growth, they are seeking a Principal RF Design Engineer to be involved with development and progression of multiple projects.
This job is ideal for an experienced, hands-on RF and antenna engineer who enjoys technical ownership, solving complex electromagnetic challenges, and mentoring junior engineers, while contributing to the development of a strong UK-based R&D capability.
Main Responsibilities of the Principal RF Design Engineer (Hybrid):
Design, simulate, and develop RF and microwave systems
Own antenna and RF design activities from concept through simulation, prototyping, test, and production handover
Act as a senior technical contributor on projects, supporting architectural decisions and design reviews
Collaborate closely with RF, electronics, systems, and mechanical engineers to ensure optimal system integration
Support development of RF subsystems including filters, amplifiers, switches, and associated control interfaces
Perform antenna, RF, and EMC testing, correlating lab results electronic or other high-reliability environments
Practical experience across simulation, prototyping, measurement, and validation
Ability to communicate complex RF concepts clearly within multidisciplinary teams
This is a fantastic job opportunity to join a well-established, successful Norwich, Norfolk based company who are investing very heavily in R&D.
To find out more about the Principal RF Design Engineer job or other potential jobs we currently have at the moment, please contact Ricky Wilcocks on 01582 878810 or kindly email your most up to date CV and covering letter to Rwilcocks@redlinegroup.Com....Read more...
The Redline Group is working in partnership with a specialist electronics manufacturer to support their search for a Contract Quality Engineer for an initial 3 month contract, supporting multiple aerospace and defence programmes. We are looking for someone who is available to start as soon as possible and can work fully on site in Bedford, with flexibility around start and finish times across a 40 hour working week.
Our customer is a globally recognised engineering business that develops and manufactures highly complex electronic and embedded technology for demanding applications. As a result of increased project activity across several key programmes, they require an experienced Contract Quality Engineer to provide support to the Quality Manager and take ownership of key quality activities within the business.
The successful Contract Quality Engineer will be responsible for supporting quality engineering activity across key projects, with a particular focus on FAIRs and PPAPs. You will work closely with manufacturing, engineering and quality teams to ensure documentation, processes and product quality requirements are maintained and delivered to the required standards.
Key Skills Required for the Contract Quality Engineer – Bedford:
Strong experience working within AS9100 / AS9102 environments
Proven experience creating and reviewing FAIRs (First Article Inspection Reports)
Experience supporting PPAP activities and quality documentation
Background within aerospace, defence or highly regulated manufacturing environments
Contractors must be eligible to obtain BPSS clearance
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
For more information or to apply for the Contract Quality Engineer opportunity based in Bedford, please contact Maddie Ramsden on MRamsden@RedlineGroup.Com or 01582 878815 quoting reference MMR1072
....Read more...
Power Electronics Engineer - Renewable Energy
My client has recently made a new job available where they are looking for a Principal Power Electronics Engineer - Renewable Energy to join their multi-skilled R&D team based in Tyne & Wear, North East England.
This company develops high performance permanent magnet electric motors and generators used in a variety of different application areas that include Rail, Energy and Power Sectors.
My client is a technology business with diverse interests in a range of industries including the rail, defence and energy sectors where it is viewed as a developer of innovative and leading edge technologies. They have a truly global footprint with facilities in nearly every developed economy and ongoing high value, high profile technology projects.
The successful candidate for thePower Electronics Engineer - Renewable Energy job– will;
Be degree educated in electronic engineering or equivalent discipline.
Have had experience in the design and development of analogue electronics.
Ideally Have experience of SMPS, AC/DC, DC/DC.
Experience within Rail, Energy or Transport sectors
As well as being able to offer fantastic career opportunities, my client also offers a very competitive package with up to £8,000 relocating funds that you can use on everything including white goods, TV's etc.
For further information regarding the job of Power Electronics Engineer - Renewable Energy based in Tyne & Wear, North East England please email an up to date CV to ndrain@redlinegroup.Com or call Nick Drain on 01582 878828.....Read more...
Power Electronics Design Engineer
My client has recently made a new opportunity available for a Power Electronics Design Engineer to join their multi-skilled R&D team based in London.
This is great opportunity to join a leading engineering organisation based in Southeast London. This is an exciting opportunity to join a global leader within advanced fibre-optic and subsea cable manufacturing.
My client is a technology business with diverse interests a variety of industries, where it is recognised for developing innovative, leading-edge technologies. They have a truly global footprint, with facilities in nearly every developed economy and a portfolio of high-value, high-profile technology projects.
The successful candidate for the London based Power Electronics Design Engineer job will:
Be degree educated in Electronic Engineering or a related discipline.
Have significant experience in the design and development of analogue power electronics.
Have proven experience designing SMPS, AC/DC and DC/DC power conversion systems.
Have experience working within the Rail, Energy, Transport or other highly regulated industrial sectors.
Be capable of providing technical leadership, mentoring engineers and driving complex power electronics projects from concept through to production.
As well as offering excellent career progression opportunities, my client provides a highly competitive package, including up to in relocation support, which can be used towards a wide range of moving expenses, including household appliances and furnishings.
For further information regarding this Power Electronics Design Engineer job based in London, please contact Ricky Wilcocks on either rwilcocks@redlinegroup.Com or 079317 88834.....Read more...
Senior Systems Engineer – Biotech Platform Development - Cambridge
A cutting-edge biotech company, based in Cambridge, are currently recruiting for a Senior Systems Engineer who will play a pivotal role in the development and delivery of next-generation medical diagnostics and biomanufacturing platforms. This is an opportunity to take technical ownership of complex, multidisciplinary systems and contribute to the translation of breakthrough IP into scalable, regulated products.
You’ll be working across engineering and R&D teams to support the design, integration, and commercialisation of semiconductor-based and biocomputing technologies. Your role will span product architecture, documentation to ISO 13485 standards, and hands-on delivery of systems that combine hardware, software, and biology. You’ll collaborate with internal stakeholders and external partners to align technical execution with broader programme goals.
We’re looking for someone with experience in systems engineering, product development, or technical project delivery within biotech, diagnostics, or medical devices. You’ll bring a solid understanding of regulated product development, and ideally some exposure to startup environments, IP creation, or cross-functional team collaboration. A background in mechanical, biomedical, or electronic engineering would be ideal.
In return, you will receive a competitive salary, annual bonus, private healthcare, generous pension contributions, and access to a wide range of lifestyle and professional development benefits.
This is a chance to join a company that values innovation, technical depth, and collaborative culture. You’ll be supported by experienced leaders and given space to grow into broader responsibilities as the company scales.
To learn more, contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your CV and a member of our team will be in touch.
....Read more...
Are you an Electrical Design Engineer looking for your next challenge? Whether you're a junior engineer looking to develop your skills or a mid-level engineer ready to take on greater responsibility, my client has an excellent opportunity to join their growing R&D team.
This is a hands-on role where you will be involved in the design and development of electrical systems for highly specialised machinery, working alongside multidisciplinary engineering teams from concept through to manufacture.
In this Electrical Design Engineer – SolidWorks role based in Abingdon, Oxfordshire, you will be responsible for the following:
Designing electrical systems and producing detailed electrical drawings and schematics using SolidWorks Electrical.
Creating and maintaining electrical documentation, including wiring diagrams, bills of materials and cable schedules.
Supporting the development of special purpose machinery by working closely with mechanical, software and manufacturing engineers.
Assisting with prototype builds, testing and commissioning activities to ensure designs meet performance and quality requirements.
The successful applicant for this Electrical Design Engineer – SolidWorks job based in Abingdon, Oxfordshire should have:
Experience using SolidWorks Electrical (or SolidWorks with electrical design exposure) to produce electrical schematics and documentation.
A good understanding of electrical design principles, control panels, wiring diagrams and industrial electrical systems.
Experience working within a manufacturing, automation, machinery or special purpose equipment environment would be advantageous
A degree, HNC/HND or equivalent qualification in Electrical Engineering, Electronic Engineering or a related discipline.
To apply for this Electrical Design Engineer – SolidWorks job based in Abingdon, Oxfordshire please send your CV to NDrain@redlinegroup.Com or call Nick on 01582 878828 for more information....Read more...
Our client, a fast-growing engineering business specialising in advanced automation and machinery solutions, are looking for a Mechanical Design Engineer in County Louth to join their team on a permanent basis.
This is a hands-on design role focused on developing automated equipment and mechatronic machinery, working closely with multidisciplinary engineering teams from initial concept through to project delivery.
Key responsibilities of the Mechanical Design Engineer job in County Louth:
Design and develop automated equipment to meet customer requirements
Own mechanical design elements from concept through to project delivery
Produce 2D and 3D designs and detailed drawings using SolidWorks
Design mechatronic equipment including mechanisms, transfer systems, servo systems, robotics, pneumatics and machine guarding
Review customer requirements and ensure designs meet project specifications
Manage technical documentation and design change control
Work collaboratively with multidisciplinary engineering and project teams
Plan and prioritise work across multiple projects
Support problem solving and continuous improvement initiatives
Ensure designs and processes comply with ISO9001 and relevant quality standards
Experience required for the Mechanical Design Engineer job in County Louth:
Bachelor's degree in Mechanical, Automation, Electrical, Electronic Engineering or a related discipline
Experience in machine design
Strong experience designing automated machinery and mechatronic systems
Proficiency with SolidWorks and 2D/3D mechanical design
Good understanding of automation principles and engineering processes
Experience working within multidisciplinary engineering teams
Knowledge of robotics and machinery safety standards desirable
Strong problem-solving, communication and organisational skills
Confident, professional and ambitious approach
Experience with Rockwell, Siemens or other automation platforms desirable
If this Mechanical Design Engineer job in County Louth could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
Our client, a leading independent Security Systems Integrator, is looking for a Bid Manager to join their team in Chilwell, Nottingham on a permanent basis.
This is an excellent opportunity to join an established security technology business, supporting the delivery of high-quality, compliant and commercially compelling bids across high-security, public space, transport and infrastructure projects throughout the UK and Ireland.
Key responsibilities of the Bid Manager job in Chilwell, Nottingham:
Manage the full bid lifecycle from opportunity qualification through to submission and contract handover.
Produce high-quality, compliant and persuasive bid and proposal content.
Coordinate internal stakeholders and Subject Matter Experts (SMEs) to ensure accurate and timely bid submissions.
Manage bid plans, timelines, compliance requirements and governance processes across multiple opportunities.
Support commercial strategy, pricing activities and continuous improvement of bid processes and content.
Experience required for the Bid Manager job in Chilwell, Nottingham:
Strong and proven Bid Management experience
Experience managing the full bid lifecycle from qualification through to submission.
Strong proposal writing and content development skills.
Familiarity with CRM systems and bid management tools.
Excellent stakeholder management, communication and project management skills.
Ability to manage multiple concurrent bids and work effectively to deadlines.
Desirable experience for the Bid Manager job in Chilwell, Nottingham:
Knowledge of the electronic security, physical security or security systems integration sector.
Sales and/or commercial training or experience.
APMP accreditation or similar professional membership.
Degree qualified or equivalent industry experience.
If this Bid Manager job in Chilwell, Nottingham could be of interest, please send your CV to jthompson@redlinegroup.Com or call James on 01582 878831 for more information.....Read more...
Optical Systems Engineer – Medical Devices - Cambridge
We are working with a leading Medical Devices company in Cambridge to recruit an Optical Systems Engineer who will play a key role in the development of industry disrupting and lifesaving/improving Medical Technologies.
This is a hands-on engineering role where you’ll be designing and integrating optical systems into complex medical technologies. From early feasibility through to product launch, you’ll be involved in every stage of development, helping to shape devices that improve diagnostics, treatment, and patient outcomes across a range of clinical applications.
You’ll be joining a multidisciplinary team of engineers and scientists, collaborating on projects that demand precision, creativity, and a deep understanding of how optics interact with mechanical, electronic, and biological systems. Your work will span simulation, prototyping, testing, and refinement, with a strong emphasis on regulatory compliance and real-world usability.
We’re looking for someone with a solid academic foundation in physics, engineering, or a related discipline, and hands-on experience in optical design and analysis. You should be confident using industry-standard tools and have a track record of delivering robust solutions in regulated environments. Experience in medical devices is highly desirable, but not essential if you bring strong transferable skills and a passion for healthcare innovation.
This role is ideal for someone who enjoys solving technical challenges, mentoring junior colleagues, and working closely with clients to bring ideas to life. You’ll be encouraged to explore new approaches, contribute to system-level thinking, and help shape the future of medical technology.
In return, you’ll receive a competitive salary, annual bonus, private healthcare, generous pension contributions, and access to a wide range of lifestyle and professional development benefits.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240. Alternatively, submit your application and a member of our team will be in touch. Please note that without a CV, we can only provide limited information.....Read more...
