Electrical Assembly Technician required ideally with IPC certification (IPC 620 or J-Std ideal) to work on PCB component soldering, micro-soldering, crimping and general wiring on the assembly of high value, low volume rugged devices.
You will work to schematics, following routings, testing and taking performance measurements with a PC based system. This role will be building systems and various components of complex drilling tools that have to perform within tight tolerances.
Key Skills.
Soldering
Crimping
Wiring
Electronics equipment
Test and build equipment
Safety equipment ....Read more...
Plant Instrument Technician required to work as part of an industrial chemical plant support and improvement team.
Requirements
Instrumented Systems experience in a refinery, chemical or allied industry.
Apprenticeship or traineeship scheme.
City and Guilds, ONC, HNC or other qualifications in relevant subject.
Hazardous area equipment training CompEx or equivalent.
Responsibilities
Instrument maintenance and repair.
Production critical inspection and repairs.
Installation and commissioning, equipment review.
Order and manage spares and equipment from suppliers maintaining adequate economic stores of materials, equipment and tools.
Liaise with instrument, electrical and other specialist engineers.....Read more...
Technician required to work in a high tech environment maintaining and servicing equipment on a daily basis. You will have experience working with varied voltages, so you are able to confidently check equipment voltage to ensure functionality with certainty.
Key skills
Understanding of vacuum systems.
Experience of engineering disciplines.
Electrical or electronic fault finding.
Single and three phase power supply
RF understanding.
High voltage AC/DC and pulsed understanding.
Responsibilities
Installing and servicing equipment.
Diagnosing faults and completing repairs.
Monitoring processes and energy performance.
Adjusting controls to ensure equipment is operating at optimum efficiency.....Read more...
Plant Instrument Technician required to work as part of an industrial chemical plant support and improvement team.
Requirements
Instrumented Systems experience in a refinery, chemical or allied industry.
Apprenticeship or traineeship scheme.
City and Guilds, ONC, HNC or other qualifications in relevant subject.
Hazardous area equipment training CompEx or equivalent.
Responsibilities
Instrument maintenance and repair.
Production critical inspection and repairs.
Installation and commissioning, equipment review.
Order and manage spares and equipment from suppliers maintaining adequate economic stores of materials, equipment and tools.
Liaise with instrument, electrical and other specialist engineers.....Read more...
Technician required to work in a high tech environment maintaining and servicing equipment on a daily basis. You will have experience working with varied voltages, so you are able to confidently check equipment voltage to ensure functionality with certainty.
Key skills
Understanding of vacuum systems.
Experience of engineering disciplines.
Electrical or electronic fault finding.
Single and three phase power supply
RF understanding.
High voltage AC/DC and pulsed understanding.
Responsibilities
Installing and servicing equipment.
Diagnosing faults and completing repairs.
Monitoring processes and energy performance.
Adjusting controls to ensure equipment is operating at optimum efficiency.....Read more...
Are you looking for an opportunity to be part of a dealer group and excellent brand, that can offer a great salary, plus continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? " Then Look No Further". This is a genuine opportunity for you to take the next step in your career, earning a fabulous salary and work with a world leading sports brand. Why Apply for this Bodyshop Technician role?Fantastic career opportunitiesState of the art resources and trainingCompany PensionPerformance BonusCompany Benefits SchemeLong Service Holiday RewardEnhanced Family Planning PolicyShare Save SchemeYour Birthday OffYou get to be a part of a sports brand and a great teamMarket leadingBodyshop Technician RequirementsYou must be fully qualified with at least an NVQ Level 3Experience of Mechanical and electrical repairsRemoval of vehicle parts/panels and re-fitting/repairing damage parts/panelsCarry out full vehicle Technician workIndividual/Team Technician workYou will need to be positive with a can do attitudeA strong team player who works well within a team....Read more...
The MET Technician / Strip Fitter role (Binfield)
- Salary of up to £25 p/h + Bonus
- Monday to Friday only - Permanent Role
- Ongoing training and development
We are seeking an experienced and motivated MET Technician to join a busy, professional accident repair centre. This is an excellent opportunity for someone who takes pride in their work and enjoys being part of a high-performing team. You will play a key role in the repair process, carrying out vehicle strip, fit, and mechanical repairs while ensuring every vehicle is returned to pre-accident condition.
Key Responsibilities:
- Carry out the removal and refitting of vehicle components to support high-quality body repairs
- Dismantle and rebuild vehicles efficiently, following repair methods and manufacturer guidelines
- Accurately identify and report any additional damage not included within the original estimate
- Perform mechanical repairs including suspension work, four-wheel alignment, and diagnostic procedures
- Complete GEO and ADAS-related tasks where required
- Work collaboratively with colleagues to ensure repairs are completed on time and to a high standard
- Maintain a strong focus on quality, safety, and customer satisfaction throughout the repair process
Requirements:
- Previous experience working as an MET Technician, Strip Fitter, or Vehicle Technician within an accident repair environment
- ATA or NVQ qualifications would be advantageous but are not essential
- Hybrid and Electric Vehicle training would be beneficial
- ADAS experience or accreditation would be highly desirable
- Excellent attention to detail and a commitment to delivering first-class repairs
- Strong team player with the ability to perform well in a fast-paced workshop environment
Benefits:
- Pension Scheme
- Ongoing training and development opportunities
- Work within a well-equipped, manufacturer-approved repair centre
- Career progression opportunities within a successful national organisation
- Supportive management team and positive working environment
If you are an experienced MET Technician looking to join a forward-thinking business that values its employees and offers genuine long-term career prospects, we'd love to hear from you. Please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £25 p/h Bodyshop Binfield
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
Maintenance TechnicianPermanent nights | West Yorkshire | £44,000 plus excellent benefitsEnjoy getting to the root cause of machinery faults? Aqumen Recruitment is recruiting on behalf of an established international manufacturing business looking to strengthen its night shift engineering team.We welcome engineers with either an electrical or mechanical bias. You will work across a varied range of production equipment, from established legacy machinery to modern automated systems, helping improve reliability and keep production running safely.The role
Diagnose faults and repair production machinery, identifying the cause of failures.Respond safely to breakdowns and carry out planned preventative maintenance.Interpret electrical schematics, pneumatic diagrams and mechanical drawings.Carry out PLC fault finding and support equipment reliability improvements.Record maintenance activity accurately using the CMMS system.Follow safe isolation procedures and maintain high standards of safety and housekeeping.A time served engineering apprenticeship and ONC, City & Guilds Level 3 or equivalent qualification.At least two years of maintenance experience in a manufacturing environment.Strong electrical and/or mechanical fault finding skills and PLC diagnostic experience.Experience of root cause analysis and improving equipment reliability.A methodical approach, good organisational and communication skills, and the ability to work independently and within a team.
Salary and benefits
£40,000 per year, with 25 days of holiday plus bank holidays, an excellent pension, life assurance, health benefits, employee support and discounts, subsidised canteen and free onsite parking.Apply today through Aqumen Recruitment for a confidential discussion about the opportunity. ....Read more...
MET Technician Up to £24 per hour + Uncapped Bonus
ð Trafford Park | ð° Up to £24 per hour + Uncapped Bonus | ð Monday to Friday | ð Permanent
Ref: 345130
Are you an experienced MET Technician looking for a role where your skills are valued, your earning potential is high, and you can enjoy a great work-life balance?
Were currently recruiting for an experienced MET Technician to join a well-established team in Manchester, offering up to £24 per hour plus an uncapped bonus scheme and an excellent benefits package with bonus starting at 75% efficiency.
ð§ The Role
As an MET Technician / Strip Fitter, youll be responsible for:
- Removing and refitting mechanical and electrical components to a high standard
- Dismantling and rebuilding vehicles following repair instructions
- Identifying and reporting any additional or unseen damage
- Carrying out 4-wheel alignment and geometry
- Suspension and mechanical repairs
- Diagnostics and general mechanical work
- Ensuring all repairs are completed safely, efficiently and to the required standard
ð¨âð§ What Were Looking For
- Previous experience working as an MET Technician
- Strong mechanical knowledge and repair skills
- Hybrid training is required
- ADAS accreditation is highly desirable
- ATA / NVQ qualifications are advantageous but not essential
- A professional approach with a strong focus on quality and safety
ð° Whats On Offer?
- Up to £24 per hour
- Fantastic uncapped monthly bonus scheme, bonus paid from 75% efficiency
- Individual bonus opportunities
- Monday to Friday no weekend working
- 24 days holiday + Bank Holidays
- Free life assurance
- Exclusive employee vehicle leasing schemes
- Pension & Save As You Earn share scheme
- Benefits app with a huge range of retailer discounts and cashback
- Access to wellbeing services
- Permanent, secure position
ð Ready to Take Your Career to the Next Level?
If youre an experienced MET Technician looking for a great opportunity with excellent earning potential and a strong benefits package, wed love to hear from you.
Apply now with your CV or contact Richard on 07590 309374 / richard@holtautomotive.co.uk for a confidential chat and more information.
....Read more...
We are looking for a Revit and CAD Technician to join a design team working on a wide variety of high-quality projects. You will be part of a specialist CAD and Revit team, working closely with lighting designers and other design professionals to develop detailed technical drawings and documentation for lighting installations and control systems.
Your responsibilities will include
Producing lighting layouts in Revit MEP and AutoCAD.
Producing lighting control channel layouts and associated documentation.
Creating detailed lighting integration and installation drawings.
Working closely with lighting designers to translate design concepts into accurate technical drawings.
Producing lighting control channel schedules using Microsoft Excel.
Supporting the development and coordination of projects from design through to installation.
Working with a variety of project types and adapting drawings to suit different architectural and interior design requirements.
Collaborating with designers, engineers and other project stakeholders to ensure drawings are accurate and delivered to the required standard.
Essential Requirements
Previous experience producing lighting or electrical layouts using Revit MEP and AutoCAD.
Strong practical experience with AutoCAD 2D.
Good working knowledge of Revit MEP.
Ability to interpret design information and produce accurate technical drawings.
Experience using the Control Panel function within Revit MEP to generate lighting control channels.
Previous experience working on lighting design, lighting controls or electrical installations.
Experience within architectural, interior design, engineering or specialist lighting environments.....Read more...
We are looking for a Revit and CAD Technician to join a design team working on a wide variety of high-quality projects. You will be part of a specialist CAD and Revit team, working closely with lighting designers and other design professionals to develop detailed technical drawings and documentation for lighting installations and control systems.
Your responsibilities will include
Producing lighting layouts in Revit MEP and AutoCAD.
Producing lighting control channel layouts and associated documentation.
Creating detailed lighting integration and installation drawings.
Working closely with lighting designers to translate design concepts into accurate technical drawings.
Producing lighting control channel schedules using Microsoft Excel.
Supporting the development and coordination of projects from design through to installation.
Working with a variety of project types and adapting drawings to suit different architectural and interior design requirements.
Collaborating with designers, engineers and other project stakeholders to ensure drawings are accurate and delivered to the required standard.
Essential Requirements
Previous experience producing lighting or electrical layouts using Revit MEP and AutoCAD.
Strong practical experience with AutoCAD 2D.
Good working knowledge of Revit MEP.
Ability to interpret design information and produce accurate technical drawings.
Experience using the Control Panel function within Revit MEP to generate lighting control channels.
Previous experience working on lighting design, lighting controls or electrical installations.
Experience within architectural, interior design, engineering or specialist lighting environments.....Read more...
An established engineering manufacturer is seeking an Electronic Manufacturing Technician to join its production team in Stonehouse.
The role
Test, fault-find, and repair electronic and electromechanical assemblies
Carry out functional testing of PWAs and PCBAs to defined procedures
Support tool assembly, calibration, and production activities
Maintain and repair test equipment
Work with MRP systems (SAP) and production documentation
About you
Background in electronic or electrical manufacturing or testing
Comfortable with multimeters, oscilloscopes, and LV and HV power supplies
Skilled in soldering, crimping, wiring, and basic fault finding
Able to read drawings and work to IPC standards
Qualification such as ONC ,HNC , HND ,NVQ Level 2 preferred
....Read more...
An established engineering manufacturer is seeking an Electronic Manufacturing Technician to join its production team in Stonehouse.
The role
Test, fault-find, and repair electronic and electromechanical assemblies
Carry out functional testing of PWAs and PCBAs to defined procedures
Support tool assembly, calibration, and production activities
Maintain and repair test equipment
Work with MRP systems (SAP) and production documentation
About you
Background in electronic or electrical manufacturing or testing
Comfortable with multimeters, oscilloscopes, and LV and HV power supplies
Skilled in soldering, crimping, wiring, and basic fault finding
Able to read drawings and work to IPC standards
Qualification such as ONC ,HNC , HND ,NVQ Level 2 preferred
....Read more...
ADAS Technical Specialist
Salary Competitive, negotiable depending on experience
Hours Monday to Friday, 8:30am 5:00pm
Location Norwich
Job Type Permanent, Full-Time
We are currently recruiting on behalf of a leading specialist automotive technology business for an experienced ADAS Technical Specialist to join their growing team.
This is an excellent opportunity for someone looking to develop their career within the rapidly expanding ADAS, diagnostics and electric vehicle sector and to come off the tools as it will be a helpdesk position.
You will be working from their head office in the Norwich area carrying out ADAS Technical Support.
The Role
As a Mobile ADAS & Diagnostic Technician, your responsibilities will include:
- Carrying out ADAS queries to manufacturer specifications.
- Vehicle diagnostics, fault finding and rectification.
- Module programming, coding and configuration.
- Diagnosing faults methodically and recommending appropriate repairs.
What We\'re Looking For
The ideal candidate will have:
- Previous experience working within a Bodyshop, main dealer or professional automotive environment.
- A minimum Level 3 Motor Vehicle qualification is desirable.
- Strong diagnostic and electrical knowledge.
- Experience using automotive diagnostic equipment.
- Knowledge of hybrid and electric vehicles.
- A methodical approach to fault finding and diagnostics.
- Excellent communication and customer service skills.
- A flexible and professional attitude.
What\'s on Offer?
- Competitive salary negotiable depending on experience
- 33 days holiday, including bank holidays
- Full training and ongoing professional development
- IMI and EV training
- Company pension
- Health & wellbeing programme
- Supportive working environment
- Monday to Friday working hours
Interested?
This is a fantastic opportunity for an experienced Vehicle Technician, Diagnostic Technician or Automotive Technician who wants to move into a specialist technical role and develop their career within ADAS, diagnostics and electric vehicle technology.
Apply now with your CV, or contact Richard on 07590 309374 or richard@holtautomotive.co.uk for a confidential chat and more information.
....Read more...
Role: Plant Maintenance Technician
Salary: £50,000 - £55,000
Location: Southampton
Hours: Monday to Friday
Contract: Permanent
A well-established business operating within the heavy industrial and recycling sector is looking for an experienced Maintenance Technician to join their team in Southampton.
This is a hands-on maintenance role working across a range of static, heavy mobile plant, and associated machinery.
You'll be responsible for keeping critical equipment running safely and efficiently, carrying out both planned and reactive maintenance, fault finding and repairs. There is also regular overtime available.
What you\'ll be doing:
- Carrying out planned and reactive maintenance across a range of heavy industrial plant
- Diagnosing faults and carrying out breakdown repairs
- Working on shredders, balers, shears, conveyors and associated equipment
- Inspecting machinery and identifying potential faults, defects and safety issues
- Carrying out preventative maintenance to maximise plant uptime
- Diagnosing hydraulic faults and carrying out repairs where required
- Working alongside the wider maintenance team to resolve faults quickly and safely
What we\'re looking for:
- Previous experience in a Maintenance Technician, Maintenance Engineer, Maintenance Fitter or similar role
- Strong mechanical maintenance and fault-finding skills
- Experience working on heavy industrial or processing machinery
- NVQ Level 3 or equivalent engineering qualification
- Good understanding of hydraulic systems
- Working knowledge of 3-phase electrical systems
What\'s on offer:
- Monday to Friday working hours
- Regular overtime
- Long-term stable employment
- Opportunity to work on a wide range of heavy industrial plant
- Ongoing development and training
If your interested?
Call Matt on 07739 277676 or email matt@holtautomotive.co.uk or apply with your up-to-date CV.....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
An opportunity has arisen for a Door Engineer / Door Technician to join a well-established security solutions provider, specialising in high-quality security, fire, and industrial door services across various sectors.
As a Door Engineer / Door Technician, you will be installing, servicing and repairing industrial and automatic door systems across customer sites in the South of the UK. This full-time permanent role offers a salary range of £40,000 - £50,000 and benefits.
You will be based in the South of the UK, responsible for servicing clients across the region, ideally covering Hampshire, Kent, Sussex, Dorset, and the surrounding areas.
You will be responsible for
? Installing, maintaining and repairing industrial doors and associated equipment.
? Carrying out inspections, identifying faults and resolving technical issues.
? Travelling to customer sites across the South of the UK.
? Working safely and in line with relevant health and safety requirements.
? Liaising professionally with customers and colleagues during site visits.
? Ensuring work is completed safely and to the required standard.
? Servicing automatic and pedestrian door systems where required.
The candidates from the following background will be considered:
? Door Engineer, Industrial Door Engineer, Automatic Door Engineer, Door Technician, Shutter Engineer, Roller Shutter Engineer, Service Engineer, or in a similar role.
What we are looking for
Essential:
? Approx. 2 years' experience working with industrial doors.
? A valid CSCS card is essential.
? Sound knowledge of installing, servicing and repairing industrial doors.
? The ability to work independently as well as alongside a wider team.
? A good understanding of health and safety requirements.
? A clean UK driving licence.
Desirable:
? Experience with automatic doors.
? An electrical qualification.
? Access Control experience.
Whats on offer
? Competitive salary
? Company car.
? ....Read more...
Field Service Engineer Crawley £36,000 - £38,000 Basic + Door-to-Door Pay + Overtime (£45,000 OTE) + Company Van + Long-Term Progression + Great Culture Are you a hands-on Field Service Engineer looking for a role with long-term security and the opportunity to work for a market leader in the environmental services sector? Join a well-established company backed by significant investment and known for its commitment to staff development and safety. Enjoy the stability of a growing business with huge expansion plans, excellent training, and support from a close-knit and highly skilled team.If you have a background in mechanical or electrical engineering, particularly with pumps, waste water, or separators, this is the ideal opportunity to take your skills to the next level in a vital and varied role as a Field Service Engineer!Your Role As A Field Service Engineer Will Include:* Field-based service, maintenance and audits of industrial assets (separators, tanks, pumps, etc.) * Hands-on site work including inspecting manholes, control panels, filters, and probes * Electrical continuity testing, stripping out/installing control panels * Working within confined spaces and producing integrity reports * Complying with safety, regulatory and customer-specific requirements * Promoting safe practices and high standards across all customer sitesAs A Field Service Engineer You Will Have:* Mechanical or electrical engineering background (wastewater, utilities, ex-military welcome) * Hands-on problem-solving approach with a strong work ethic * Previous experience with pumping stations, separators, or water systems preferred * Full driving license and willingness to travel regionally * IT skills and the ability to use tablets/software on-siteApply now or call Billy on 07458163030 for immediate consideration! Keywords: Field Service Engineer, Mechanical Engineer, Electrical Engineer, Environmental Services Engineer, Pump Engineer, Wastewater Engineer, Utilities Maintenance, Industrial Service Technician, Site Engineer, PPM Engineer, This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Field Service Engineer
Hertford
£30,000 - £40,000 Basic + Optional Overtime + Company Van + Fuel Card + Door-to-Door + Holiday + Birthday Day Off + Pension + OEM Training + Family Feel + Work-Life Balance + Long-Term Stability + Job satisfaction + Immediate start + Package + Monday - Friday + Local patch + Social eventsSolidify your career now as a field service engineer with a family-feel business where you are genuinely valued and listened to. This is a fantastic opportunity to join a friendly and growing company within the commercial coffee industry, where you will be given full training on a range of traditional and bean-to-cup coffee machines. You will benefit from full on the job training to do your job to the best of your ability and have everyday job satisfaction. Enjoy a great work-life balance with a Monday - Friday role with no weekends.This company operates within the coffee industry and have a strong focus on making positive changes for their staff, creating a supportive environment where you can build a long-term career without feeling like just another number. As a field service engineer, you will be responsible for attending commercial customer sites to carry out servicing, repairs, PPMs and installations across a wide variety of coffee machines. You will also receive in-house training from experienced engineers, including barista training so you understand the machines, grinder adjustments and correct coffee recipes. Join now and secure a job for life accompanied by a generous package!The Role Of The Field Service Engineer:
Service, repair, PPM and installation of coffee equipment - traditional and bean-to-cup machines
1-in-4 paid on-call rota with very low call-out frequency
Field Service Engineer role covering a local patch around Hertford
Checking voltage and resistance, basic plumbing & electrical fault finding using a multimeter
Customer-facing work across restaurants, chains, offices, airports and other commercial environments
The Successful Field Service Engineer Will Have:
Electrical/mechanical Field Service Engineering background (Coffee is preferred)
Basic electrical fault-finding experience & confident using a multimeter to check voltage and resistance
Basic plumbing knowledge (desired)
Passionate about coffee engineering
Commutable to cover a local patch around HertfordKeywords: Field Service Engineer, Coffee Machine Engineer, Coffee Machine Technician, Coffee Engineer, Catering Equipment Engineer, Commercial Coffee Machines, Bean-to-Cup, Traditional Coffee Machines, Espresso Machines, Coffee Grinders, Electrical Fault Finding, Multimeter, Voltage Testing, Resistance Testing, Mechanical Fault Finding, Plumbing, PPM, Preventative Maintenance, Installation, Commissioning, Breakdown Repairs, WMF, Schaerer, Franke, Thermoplan, Eversys, Liquidline, Bravilor Bonamat, Jura, La Cimbali, Rancilio, Nuova Simonelli, Welwyn Garden City, Hatfield, Stevenage, Hertford, St Albans, Watford, Hemel Hempstead, Luton, Borehamwood, Barnet, Enfield, North London, Hertfordshire, Bedfordshire, Essex, London, M25.Apply now or send your cv
....Read more...
FP McCann are the UK’s largest manufacturer and supplier of precast concrete solutions. They are committed to high quality, cost-effective and sustainable solutions tailored to meet their clients' requirements.
From their thirteen UK manufacturing facilities, FP McCann offers solutions that include architectural and structural solutions, rooms, flooring, fencing, walling, shafts, tunnels, drainage, rail, power and agricultural products. They have worked on a large range of Design for Manufacture and Assembly (DfMA) projects across the UK. Their in-house Digital Engineering capability has grown in line with government and client expectations.
As a Mechatronics Maintenance Apprentice, you will develop the practical skills and technical knowledge needed to become a multi-skilled maintenance engineer. Working alongside experienced engineers, you will gain hands-on experience maintaining, repairing and improving the plant and equipment that keeps their manufacturing operations running safely, efficiently and reliably. Over the course of this four-year apprenticeship, you will combine structured off-the-job training with practical, on-site learning, building expertise in both mechanical and electrical engineering disciplines.
You will be part of the Maintenance Team, working under the guidance and support of a dedicated mentor who will help you develop your skills and confidence throughout the programme. As your experience grows, you will take on increasing responsibility while learning to work safely and professionally in a busy manufacturing environment.
Your day-to-day activities will include supporting planned preventative maintenance to maximise equipment reliability and minimise downtime, assisting with fault finding, diagnosing and repairing mechanical and electrical systems on a wide range of manufacturing plant, and helping to maintain pneumatic and hydraulic equipment, motors, drives, sensors and basic control systems. You will also carry out routine inspections, lubrication, adjustments and component replacements under supervision while learning industry best practice.
Safety will be at the heart of everything you do. You will follow safe systems of work, including risk assessments, permit-to-work procedures and lock out/tag out (LOTOTO) processes, while maintaining high housekeeping standards across the site. You will also learn the importance of accurately recording maintenance activities, communicating effectively with the engineering team and contributing to continuous improvement initiatives that enhance safety, quality, reliability and operational performance.Training:
Level 3 Mechatronics Maintenance Technician
Level 2 Functional Skills in English and maths if required
Training Outcome:Successful completion of the apprenticeship will open the door to excellent career opportunities within FP McCann. They are committed to investing in their people and supporting continued learning, personal development and long-term career progression.
Throughout the programme, you will gain a nationally recognised qualification while receiving structured on-the-job training and valuable hands-on experience in a modern manufacturing environment. You will be supported every step of the way by experienced engineers and dedicated mentors, helping you build the knowledge, skills and confidence needed for a successful engineering career.
You will gain:
Real experience working in the industry
Ongoing support and mentoring from experienced team members
The opportunity to build skills in Electrical machines, Electro-pneumatic and electro-hydraulic systems and devices, Mechanical principles and applications, Engineering maintenance procedures and techniques, Monitoring and fault diagnosis of electrical and mechanical engineering systems
Employer Description:FP McCann LtdWorking Hours :Monday to Friday - You will work 8 hour shifts (30-minute unpaid lunch break) scheduled between 6:00am and 6:00pm, with shift patterns varying to meet business needs.Skills: Attention to detail,Motivated and eager to learn,Team working....Read more...
An opportunity has arisen for a Door Engineer / Door Technician to join a well-established security solutions provider, specialising in high-quality security, fire, and industrial door services across various sectors.
As a Door Engineer / Door Technician, you will be installing, servicing and repairing industrial and automatic door systems across customer sites in the South of the UK. This full-time permanent role offers a salary range of £40,000 - £50,000 and benefits.
You will be based in the South of the UK, responsible for servicing clients across the region, ideally covering Hampshire, Kent, Sussex, Dorset, and the surrounding areas.
You will be responsible for
* Installing, maintaining and repairing industrial doors and associated equipment.
* Carrying out inspections, identifying faults and resolving technical issues.
* Travelling to customer sites across the South of the UK.
* Working safely and in line with relevant health and safety requirements.
* Liaising professionally with customers and colleagues during site visits.
* Ensuring work is completed safely and to the required standard.
* Servicing automatic and pedestrian door systems where required.
The candidates from the following background will be considered:
* Door Engineer, Industrial Door Engineer, Automatic Door Engineer, Door Technician, Shutter Engineer, Roller Shutter Engineer, Service Engineer, or in a similar role.
What we are looking for
Essential:
* Approx. 2 years' experience working with industrial doors.
* A valid CSCS card is essential.
* Sound knowledge of installing, servicing and repairing industrial doors.
* The ability to work independently as well as alongside a wider team.
* A good understanding of health and safety requirements.
* A clean UK driving licence.
Desirable:
* Experience with automatic doors.
* An electrical qualification.
* Access Control experience.
Whats on offer
* Competitive salary
* Company car.
* Company pension.
* On-site parking.
This is an excellent opportunity for a Door engineer to join a respected organisation and make a real impact.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Trainee EngineerTamworth£25,000 - £30,000 Basic + Door to Door Pay + Overtime (OTE £40k+) + Training + Progression + Specialist Industry + Package Are you looking for a Trainee Engineer role where you can become a recognised specialist within a growing business where you’ll receive excellent technical training, plenty of overtime, and clear progression to take you from a junior to a highly skilled field service engineer.This established company delivers specialist ventilation and HVAC solutions throughout the UK and is continuing to grow due to increasing demand and long-term contracts. Work alongside experienced technicians on bespoke equipment you'll develop your skills with ongoing training. With door to door pay, and regular overtime available, this is a great opportunity for a Trainee Engineer to increase both your technical ability and earnings long term.Your role as a Trainee Engineer will include:* Field service role - nationwide travel * Service, maintenance, fault finding and installations * Working on specialist ventilation and HVAC equipment * Ongoing training alongside experienced engineers * Door to door pay + overtime * Progression into a specialist engineer roleThe successful Trainee Engineer will need:* Mechanical or electrical engineering experience * Any HVAC, maintenance, service or installation background considered * Hands-on attitude and willingness to learn * Full UK driving licence * Comfortable travelling across the UKPlease apply and call Georgia on 07458163040Keywords: trainee engineer, Junior Service Engineer, Field, HVAC, Ventilation, Mechanical, Electrical, Maintenance, Installation, Mobile, Technician, Air Conditioning, Ductwork, Ventilation, tamworth, birmingham, midlandsThis vacancy is being advertised by Future Engineering Recruitment Ltd.The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
