Ability to undertake appropriate job preparation prior to commencing repair, e.g. disarming airbags, undertaking electrical safety precautions and conducting pre-repair diagnostics sweeps.
Ability to interpret relevant technical data, specification and methods will enable appropriate pre-preparation prior to work being carried out.
Ability to remove, repair and replace Engine, gearbox, suspension, mechanical and electrical systems, related autonomous items from the vehicle safely, e.g. Anti-lock Braking System units, safety restraint systems, Radio Detection and Ranging (RADAR) & Light Detection And Ranging (LIDAR) semi-autonomous components.
Ability to diagnose and fix faults within a vehicle management system (on board computer) & associated electrical system.
Ability to identify and communicate supplementary parts where required.
Ability to identify and operate the correct repair tools, equipment and devices used in the process such as Geometry Wheel Aligners for alignment of the wheels, diagnostic hardware to establish any faults with the vehicle and establish if parts are replaced or re calibrated, utilising torque wrenches to tighten nuts/bolts to the manufacturer recommendations.
Ability to rebuild vehicles post repair and reinstate safety critical systems including Safety Restraint Systems, airbags, seat belts and pretensions, Advanced Driver Assistance Systems, cameras, Radio Detection and Ranging (RADAR) systems and Light Detection And Ranging (LIDAR) systems including collision avoidance technology.
Qualified in refrigerant handling to EC842 2006 or the most up to date revision of this legislative requirement to enable the repair or replacement of air condition/climate control parts such as condensers, evaporator compressor pump.
Training:The Programme typically lasts for 36 months dependant on the career path chosen and you'll achieve a nationally recognised qualification.
Block training at our state-of-the-art facility in Slough is complemented by a combination of regular coaching visits from one of our experienced Coaches as well as Virtual Classroom sessions and E-Learning modules.Training Outcome:There are lots of opportunities to develop your career within our expanding business. Your early development is carefully mapped through your Apprenticeship journey with your learning focused toward achieving an industry-recognised qualification.Employer Description:At Steer our people are our strength which is why we are keen to give you the opportunity to grow and develop your career as we build an innovative and sustainable company. At Steer, we reward hard work and talent.Working Hours :A typical working week could be 40 hours Monday to Friday 8.30am 5.30pm however your exact hours will be confirmed at a face-to-face interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Ability to undertake appropriate job preparation prior to commencing repair, e.g. disarming airbags, undertaking electrical safety precautions and conducting pre-repair diagnostics sweeps
Ability to interpret relevant technical data, specification and methods will enable appropriate pre-preparation prior to work being carried out
Ability to remove, repair and replace Engine, gearbox, suspension, mechanical and electrical systems, related autonomous items from the vehicle safely, e.g. Anti-lock Braking System units, safety restraint systems, Radio Detection and Ranging (RADAR) & Light Detection And Ranging (LIDAR) semi-autonomous components
Ability to diagnose and fix faults within a vehicle management system (on board computer) & associated electrical system
Ability to identify and communicate supplementary parts where required
Ability to identify and operate the correct repair tools, equipment and devices used in the process such as Geometry Wheel Aligners for alignment of the wheels, diagnostic hardware to establish any faults with the vehicle and establish if parts are replaced or re calibrated, utilising torque wrenches to tighten nuts/bolts to the manufacturer recommendations
Ability to rebuild vehicles post repair and reinstate safety critical systems including Safety Restraint Systems, airbags, seat belts and pretensions, Advanced Driver Assistance Systems, cameras, Radio Detection and Ranging (RADAR) systems and Light Detection And Ranging (LIDAR) systems including collision avoidance technology
Qualified in refrigerant handling to EC842 2006 or the most up to date revision of this legislative requirement to enable the repair or replacement of air condition/climate control parts such as condensers, evaporator compressor pump
Training:The Programme typically lasts for 36 months dependant on the career path chosen and you'll achieve a nationally recognised qualification.
Block training at our state-of-the-art facility in Slough is complemented by a combination of regular coaching visits from one of our experienced Coaches as well as Virtual Classroom sessions and E-Learning modules.Training Outcome:There are lots of opportunities to develop your career within our expanding business. Your early development is carefully mapped through your Apprenticeship journey with your learning focused toward achieving an industry-recognised qualification.Employer Description:At Steer our people are our strength which is why we are keen to give you the opportunity to grow and develop your career as we build an innovative and sustainable company. At Steer, we reward hard work and talent.Working Hours :A typical working week could be 40 hours Monday to Friday 8.30am 5.30pm however your exact hours will be confirmed at a face-to-face interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Ability to undertake appropriate job preparation prior to commencing repair, e.g. disarming airbags, undertaking electrical safety precautions and conducting pre-repair diagnostics sweeps
Ability to interpret relevant technical data, specification and methods will enable appropriate pre-preparation prior to work being carried out
Ability to remove, repair and replace Engine, gearbox, suspension, mechanical and electrical systems, related autonomous items from the vehicle safely, e.g. Anti-lock Braking System units, safety restraint systems, Radio Detection and Ranging (RADAR) & Light Detection And Ranging (LIDAR) semi-autonomous components
Ability to diagnose and fix faults within a vehicle management system (on board computer) & associated electrical system
Ability to identify and communicate supplementary parts where required
Ability to identify and operate the correct repair tools, equipment and devices used in the process such as Geometry Wheel Aligners for alignment of the wheels, diagnostic hardware to establish any faults with the vehicle and establish if parts are replaced or re calibrated, utilising torque wrenches to tighten nuts/bolts to the manufacturer recommendations
Ability to rebuild vehicles post repair and reinstate safety critical systems including Safety Restraint Systems, airbags, seat belts and pretensions, Advanced Driver Assistance Systems, cameras, Radio Detection and Ranging (RADAR) systems and Light Detection And Ranging (LIDAR) systems including collision avoidance technology
Qualified in refrigerant handling to EC842 2006 or the most up to date revision of this legislative requirement to enable the repair or replacement of air condition/climate control parts such as condensers, evaporator compressor pump
Training:The Programme typically lasts for 36 months dependant on the career path chosen and you'll achieve a nationally recognised qualification.
Block training at our state-of-the-art facility in Slough is complemented by a combination of regular coaching visits from one of our experienced Coaches as well as Virtual Classroom sessions and E-Learning modules.Training Outcome:There are lots of opportunities to develop your career within our expanding business. Your early development is carefully mapped through your Apprenticeship journey with your learning focused toward achieving an industry-recognised qualification.Employer Description:At Steer our people are our strength which is why we are keen to give you the opportunity to grow and develop your career as we build an innovative and sustainable company. At Steer, we reward hard work and talent.Working Hours :A typical working week could be 40 hours Monday to Friday 8.30am 5.30pm however your exact hours will be confirmed at a face-to-face interview.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Maintenance Plumber – FM Service Provider – Commercial Office (Law Firm) – Liverpool Street, London – Up to £42,000 per annum CBW Staffing Solutions is currently recruiting for a Maintenance Plumber to be based at a prestigious commercial office building in Liverpool Street, London, supporting a high-end law firm. This is an excellent opportunity to join a well-established FM service provider, working across a modern corporate environment as part of a close-knit team of engineers. The successful candidate will hold a plumbing qualification (Level 2 NVQ / City & Guilds) and have a strong background in commercial building maintenance. Alongside planned and reactive plumbing works, you will also carry out a variety of general building services maintenance including basic electrical tasks, AHU maintenance, fan coil units, plant room checks and other fabric and mechanical duties. This is a fantastic opportunity for a well-rounded maintenance engineer looking to develop within a leading FM provider offering excellent training, career progression and overtime opportunities. PackageSalary: Up to £42,000 per annumMonday to Friday | 08:00 – 17:00Overtime opportunities availableTraining & development programmesCompany pension schemeExcellent career progressionKey Duties & ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance across the sitePerform plumbing repairs including toilets, taps, sinks, pipework and sanitarywareDiagnose and repair faults within commercial plumbing systemsCarry out basic electrical maintenance including lamp changes, socket replacements, emergency lighting checks and minor fault findingUndertake routine maintenance on AHUs, fan coil units, pumps, valves and associated mechanical plantComplete water hygiene tasks including temperature monitoring and flushing regimesAssist with minor mechanical and plumbing installationsCarry out general building fabric maintenance including doors, locks, ceiling tiles and minor repairsRespond promptly to reactive maintenance requests across all building servicesEscort and supervise specialist subcontractorsEnsure all works are completed in accordance with health & safety proceduresMaintain accurate maintenance records using the site's CAFM systemRequirementsLevel 2 NVQ / City & Guilds in Plumbing (Essential)Experience within commercial building maintenance or Facilities ManagementGood all-round building services knowledge with a multi-skilled approachComfortable carrying out basic electrical maintenance and first-line fault findingExperience maintaining AHUs, FCUs and associated mechanical plant is desirableStrong problem-solving skills and a proactive attitudeExcellent communication and customer service skillsReliable, professional and able to work effectively within a teamPlease send your CV to Alex Denton at CBW Staffing Solutions for more information and to avoid missing out on this excellent opportunity.....Read more...
Foot Mobile Maintenance Engineer – Client Direct – Commercial Office Portfolio – Central London – Up to £50,000 + Package CBW Staffing Solutions is currently recruiting for a Foot Mobile Maintenance Engineer to join one of London's fastest-growing client-direct property companies. Due to continued expansion, opportunities are available for Electrical, Mechanical, and Fabric Engineers to work across a prestigious portfolio of commercial office buildings throughout Zones 1 & 2. This is an excellent opportunity for an experienced engineer looking for a varied, client-facing role with genuine opportunities for career progression. Working across multiple high-end commercial buildings, you'll carry out planned and reactive maintenance, support tenant projects, and play a key role in maintaining first-class facilities. In return, the company offers an excellent salary, comprehensive benefits, and a clear pathway into Supervisor and management positions. Hours of Work:Monday to Friday08:00 am – 17:00 pm Overtime AvailableOccasional Call-Outs (where applicable)Key Duties & Responsibilities:Carrying out planned preventative and reactive maintenance across a portfolio of commercial office buildings.Completing electrical, mechanical, or fabric maintenance depending on your trade background.Supporting tenant fit-outs, quoted works, and small project works.Maintaining HVAC systems, including AHUs and FCUs.Carrying out statutory compliance tasks, including emergency lighting, fire alarm testing, and water treatment checks.Completing maintenance reports, logbooks, and compliance documentation.Liaising with and supervising specialist subcontractors.Providing a professional, client-facing service while building strong relationships with tenants and site management.Supporting the wider engineering team across multiple Central London sites.Package:Salary £37,000 – £50,000 (depending on experience, qualifications, and discipline)Zones 1–2 Travelcard28 Days Holiday + Bank HolidaysPrivate Medical Insurance (after probation)Cycle to Work SchemeSeason Ticket LoanPlenty of Overtime AvailableOngoing Training & DevelopmentGenuine Career Progression into Supervisor and Management rolesRequirements:City & Guilds / NVQ Level 2 & 3 in Electrical or Mechanical Engineering (where applicable)Proven experience within commercial building maintenanceGood understanding of statutory compliance and health & safety legislationStrong fault-finding and problem-solving abilitiesExcellent communication and customer-facing skillsComfortable working across multiple sites throughout Central LondonReliable, professional, and able to work both independently and as part of a teamPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity.....Read more...
The Maintenance Engineer vacancy is working with a market leading listed manufacturing business, based in the Wakefield area (Featherstone). The position offers excellent opportunities for both training and career development including robotics and PLC training. Taking OTE of above £60,000 ++What’s in it for your as a Maintenance Engineer:
Hours of work – Days and Nights 4 on 4 off – 6am to 6pm
Salary – £54,000 per annum
Location - Featherstone/Normanton
KPI Bonus of £2000
OT paid at 1.5 and 2x
Life Assurance schemes
PLC and Robotics Training
Share Schemes
Double figure pension match
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled maintenance engineer etc....Read more...
We are currently seeking an experienced Heavy Plant Fitter to join a well-established and growing business operating within the aggregates, recycling, earthworks, and construction sectors.
This is a hands-on role working on a wide range of heavy plant and processing equipment, ensuring machinery remains safe, reliable, and operational across multiple sites. You'll be joining a professional team where your skills and experience will play a vital role in keeping operations running efficiently.
Key Responsibilities
- Service, maintain, and repair a variety of heavy plant machinery including excavators, loading shovels, crushers, screeners, dumpers, and material handling equipment
- Diagnose and rectify mechanical, hydraulic, electrical, and pneumatic faults
- Carry out planned preventative maintenance and routine inspections
- Attend breakdowns and minimise equipment downtime through effective fault finding
- Complete maintenance records and job documentation accurately
- Ensure all work is carried out in accordance with health and safety procedures
- Work closely with site management and operational teams to maintain fleet reliability
About You
- Proven experience working as a Heavy Plant Fitter, Plant Engineer, Plant Mechanic, or similar role
- Strong knowledge of hydraulic, mechanical, and electrical systems
- Experience working on quarrying, recycling, aggregates, construction, or material handling equipment would be advantageous
- Excellent fault-finding and diagnostic abilities
- Able to work independently and manage workload effectively
- Full UK Driving Licence (essential)
- A proactive and safety-conscious approach to work
What We Offer
- Competitive salary based on experience
- Overtime opportunities available
- Company pension scheme
- Long-term career prospects within a growing organisation
- Varied and interesting workload across a diverse fleet of machinery
- Ongoing training and development opportunities
- Supportive and professional working environment
Apply Today If you are an experienced Heavy Plant Fitter looking for your next challenge and want to work on a varied fleet of heavy machinery, we'd love to hear from you.
ð Pete 07485 986178
ð§ pete@holtautomotive.co.uk....Read more...
The Maintenance Engineer vacancy is working with a market leading listed manufacturing business, based in the Wakefield area (Featherstone). The position offers excellent opportunities for both training and career development including robotics and PLC training. Taking OTE of above £60,000 ++What’s in it for your as a Maintenance Engineer:
Hours of work – Days and Nights 4 on 4 off – 6am to 6pm
Salary – £54,000 per annum
Location - Featherstone/Normanton
KPI Bonus of £2000
OT paid at 1.5 and 2x
Life Assurance schemes
PLC and Robotics Training
Share Schemes
Double figure pension match
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above – Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled maintenance engineer etc....Read more...
Multi-Skilled Maintenance Engineer | 4 on 4 off Days | £50,000Southall, London £50,000 + Bonus
A leading manufacturer based near Southall is looking to recruit a Multi-Skilled Maintenance Engineer to join its engineering team following an internal promotion. This is an excellent opportunity to join a well-invested site offering long-term stability, modern production equipment and genuine career progression.
Working a 4 on 4 off days shift pattern, you will be responsible for carrying out planned and reactive maintenance across a range of automated production and packaging machinery, ensuring the site continues to operate efficiently and achieve production targets.
Key Responsibilities • Electrical and mechanical fault finding • Planned preventative maintenance • Reactive breakdown repairs • Continuous improvement activities • Supporting production performance and machine reliability • Maintaining health and safety standards across the site
You'll be working on equipment including flow wrappers, weighers, tray sealers and cartoners.
About You • Multi-Skilled Maintenance Engineer • Strong electrical and mechanical fault-finding skills • Experience within FMCG, food manufacturing, packaging or automated production environments • Engineering qualification (Apprenticeship, NVQ, City & Guilds or equivalent) • Proactive approach with a positive attitude towards continuous improvement
Package • £50,000 salary • Annual bonus • Healthcare • Pension • Gym discount • 25 days holiday
This is a fantastic opportunity for a Maintenance Engineer looking for a days-based role with a company that genuinely invests in its people, equipment and future growth.
Apply today to be considered for the position. ....Read more...
Field Service Engineer
Leicester
£25,000 - £35,000 Basic + Training + Bonuses (OTE £40K) + Progression + Growing Business + IMMEDIATE START
Are you a Field Service Engineer looking for a change of industry and the opportunity to join a growing engineering company? This is an excellent opportunity to join a well-established and expanding business within the installation industry, where engineers are genuinely invested in through structured training, ongoing support, and clear opportunities for internal progression. You'll receive comprehensive industry training from day one, enabling you to develop your technical expertise while building a long-term career with a company that promotes from within.
From day one, you'll receive structured training and a clear pathway for career progression. As your skills and experience grow, you'll take on greater responsibility while significantly increasing your earnings through overtime opportunities. Backed by a supportive team, this role offers long-term career stability, excellent development prospects, and outstanding earning potential.
This Field Service Engineer Role Will Include:
* Full training on servicing, repairs, breakdowns, and fault-finding * Working on automatic gates and barriers * Progression into senior roles
The Ideal Field Service Engineer Will Have:
* Electrical or mechanical background * A desire to get into the gate / door industry * Full driving licence required * Must be commutable around the east or west midlands
For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Field Service Engineer, Service Engineer, Engineering, Gate engineer, Health and safety, Automation engineer, Repairs and maintenance, Electrical, Door systems,shutters, mechanical, maintenance, field service, doors, gates, barriers, Leicester, Loughborough, Derby, Sheffield, Nottingham....Read more...
Field Service Engineer
Corby
£34,000 - £36,000 Basic + Overtime (OTE £45,000+) + Company Van + Pension + Healthcare + Immediate Start Are you a Field Service Engineer looking to develop your skills through structured training and clear progression? Are you keen to build a long-term career within a business that actively invests in its engineers? This is an excellent opportunity to join a global leader in conveyors and automation, offering industry-leading training, variety, and genuine career development. This role is ideal for a Field Service Engineer who wants to learn, progress, and grow within a supportive service team. You’ll receive comprehensive training on advanced material handling systems while working with high-profile clients across logistics, e-commerce, retail, and manufacturing in the UK and abroad.Your Job As A Field Service Engineer Will Include:
* Installing, servicing, and maintaining conveyor and material handling systems * Carrying out preventive maintenance and reactive breakdown repairs * Shadowing senior engineers during training and gradually taking ownership of jobs * Attending structured technical training courses and manufacturer-led programmes * Producing service reports and working to strict health & safety standards * Supporting and supervising installation projects as experience grows
As A Field Service Engineer You Will Have:
* NVQ, apprenticeship, or time-served background in ANY electrical engineering * A hands-on maintenance or service background (training provided on specific systems) * A strong willingness to learn and progress technically and professionally * Good communication skills and confidence working with customers * A flexible approach to UK and occasional overseas travel * A full UK driving licenceKeywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Conveyor Systems, Material Handling, Automation, Mechanical Engineering, Electrical Engineering, Birmingham, Engineering Services....Read more...
The Maintenance Electrician vacancy is working with a leading manufacturing company based in the Maidstone area of Kent. The position offers excellent opportunities for both training and career development. The client have large CAPEX and investment budgets.Location: Maidstone, KentWhat’s in it for you as a Maintenance Electrician?
Hours of Work – Panama - 4on 4off Days and Nights
Salary - £57,500 per annum, plus annual pay increases
33 days Holiday pro rata
Overtime at 1.5x and 2x
Annual KPI Production Bonus
Company pension
Employee Assistance Programme
Training, Career and Development opportunities
Main Duties & Responsibilities of Maintenance Electrician include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained – maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for the Maintenance Electrician;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g. NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
Time served Mechanical Engineer or as Maintenance Engineer
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
The position may suit a Maintenance Engineer, Mechanical Maintenance Engineer,, Electrical Maintenance Engineer, Maintenance engineer, Maintenance fitter, Multi-skilled engineer, Mechanical Engineer....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday – Thursday
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV....Read more...
Mechanical Maintenance EngineerSalary: Up to £55,000Shifts: 4 on 4 off
Location: LeicesterBenefits: Competitive Salary, 15% pension, bonus scheme Optional Overtime, Pension Plan, 26 days holidaysSynergi are recruiting for an Mechanical Maintenance Engineer to join a large manufacturer in Leicester. The successful candidate would join the Engineering Team on a 4 on 4 off basis working an average of 42.5 hours a week. This is a great opportunity for an Mechanical Maintenance Engineer/Fitter to work in an award-winning business with progression and training options.Company Profile:The company is one of the largest producers in Britain. People are at the heart of the business all the way from material to the retail shelves in major suppliers. They pride themselves on knowledge and dedicate to products of the highest quality.Mechanical Maintenance Engineer Job Description:As an Mechanical Maintenance Engineer, you will be overseeing reactive and Planned Maintenance and ensure standards are hit. You will be diagnosing faults, identifying problems on machinery, and implementing solutions. Repair of site machinery with electrical and mechanical multi-skilling will be required. You will be aware of the pressures involved and have a proactive approach to electrical maintenance.Roles & Responsibilities as a Mechanical Maintenance Engineer:• Mechanical Maintenance• Preventative maintenance• Health & SafetyTo be suitable for this position, the ideal Mechanical Maintenance Engineer will have experience in the below:• A UK Recognised engineering qualification• Worked in either Food, Pharmaceutical, Automation, General FMCGMechanical Maintenance EngineerSalary: Up to £55,000Shifts: 4 on 4 offBenefits: Competitive Salary, 15% pension, bonus scheme Optional Overtime, Pension Plan, 26 days holidays....Read more...
Field Service Engineer Peterborough £34,000 - £36,000 Basic + Overtime (OTE £45,000+) + Company Van + Pension + Healthcare + Immediate Start
Are you a Field Service Engineer looking to develop your skills through structured training and clear progression? Are you keen to build a long-term career within a business that actively invests in its engineers? This is an excellent opportunity to join a global leader in conveyors and automation, offering industry-leading training, variety, and genuine career development.
This role is ideal for a Field Service Engineer who wants to learn, progress, and grow within a supportive service team. You’ll receive comprehensive training on advanced material handling systems while working with high-profile clients across logistics, e-commerce, retail, and manufacturing in the UK and abroad.
Your Job As A Field Service Engineer Will Include:
* Installing, servicing, and maintaining conveyor and material handling systems * Carrying out preventive maintenance and reactive breakdown repairs * Shadowing senior engineers during training and gradually taking ownership of jobs * Attending structured technical training courses and manufacturer-led programmes * Producing service reports and working to strict health & safety standards * Supporting and supervising installation projects as experience grows
As A Field Service Engineer You Will Have:
* NVQ, apprenticeship, or time-served background in ANY electrical or mechanical engineering * A hands-on maintenance or service background (training provided on specific systems) * A strong willingness to learn and progress technically and professionally * Good communication skills and confidence working with customers * A flexible approach to UK and occasional overseas travel * A full UK driving licenceKeywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Conveyor Systems, Material Handling, Automation, Mechanical Engineering, Electrical Engineering, Birmingham, Engineering Services....Read more...
We are seeking a skilled Mobile Forklift Engineer to join a busy, dynamic team supporting materials handling equipment.
In this role as a Mobile Forklift Engineer, you will report to your local service manager and be responsible for ensuring all machinery both customer-owned and company-owned is fully operational.
This is an excellent opportunity for a motivated Mobile Forklift Engineer who takes pride in problem-solving and delivering outstanding customer service in the field.
Key Responsibilities
- Diagnose, service, and repair mechanical, electrical, and hydraulic systems on materials handling equipment as a Mobile Forklift Engineer.
- Carry out emergency breakdown repairs on-site to minimise customer downtime in your role as a Mobile Forklift Engineer.
- Work safely and independently across customer locations, adhering to all health and safety procedures as a Mobile Forklift Engineer.
- Maintain accurate service records, reports, and compliance documentation as part of your Mobile Forklift Engineer duties.
- Liaise professionally with customers and internal teams to ensure a smooth and efficient service experience as a Mobile Forklift Engineer.
Skills and Experience
- Strong technical background in materials handling equipment, industrial machinery, or similar.
- Proven experience in a field service or maintenance role, ideally as a Mobile Forklift Engineer.
- Hands-on knowledge of mechanical, electrical, and hydraulic systems.
- Excellent customer service and communication skills.
- Self-motivated, proactive, and able to work independently as a Mobile Forklift Engineer.
What We Offer
- Competitive salary and benefits package.
- Opportunity to work with a range of industry-leading equipment.
- Training and development opportunities to grow your career as a Mobile Forklift Engineer.
- Supportive and collaborative working environment.
If you are a motivated and skilled Mobile Forklift Engineer looking for your next challenge, we want to hear from you! Please contact Peter on 07485 986178 or peter@holtautomotive.co.uk....Read more...
We are currently recruiting for an experienced Mobile Forklift Engineer to join a well-established and growing material handling business to cover the North East. This is an excellent opportunity for a skilled engineer looking to work with a wide range of forklift trucks and warehouse equipment while benefiting from a competitive package and excellent career progression opportunities.
The Role As a Mobile Forklift Engineer, you will be responsible for servicing, maintaining and repairing a variety of forklift trucks and material handling equipment at customer sites. You will diagnose faults, carry out planned maintenance and ensure equipment is operating safely and efficiently.
This is a field-based position covering a local territory in the North East, allowing you to build strong customer relationships while working independently.
Key Responsibilities
- Service, maintain and repair forklift trucks and material handling equipment.
- Diagnose and rectify mechanical, hydraulic and electrical faults.
- Carry out planned preventative maintenance (PPM).
- Attend breakdowns and provide timely repairs.
- Complete service documentation accurately.
- Maintain high levels of customer service.
- Ensure all work is completed in line with health and safety requirements.
- Manage van stock and company equipment effectively.
Requirements
- Previous experience as a Forklift Engineer
- Strong mechanical, hydraulic and electrical fault-finding skills.
- Experience working independently in a field-based role.
- Full UK Driving Licence.
- Strong customer-facing and communication skills.
- Relevant engineering qualifications would be advantageous but are not essential.
Package
- Competitive Basic Salary
- Paid Overtime
- Company Van
- Mobile Phone & Tablet
- Pension Scheme
- Ongoing Manufacturer Training
- Career Development Opportunities
- Holiday Allowance
If you're a motivated engineer looking for your next challenge within a growing and supportive business, we'd love to hear from you. Apply today with your CV for immediate consideration.
peter@holtautomotive.co.uk....Read more...
General duties including:
Answer & direct phone calls, emails and other enquiries
Assist in scheduling appointments
Prepare and manage office documentation (quotes, reports, invoices)
Maintain office supplies
Support project managers and team members with administrative tasks
Assist in the preparation of quotations.
Perform other office related duties, as required
Act within the limits of your own competence and within the agreed ways of working, following policies and protocols used in the workplace
Use communication methods and techniques to overcome barriers and meet individuals’ wishes, preferences and needs
Maintain and further develop your own skills and knowledge.
Contribute to the quality of services by participating in improvement activities
Training:Training will be at Doncaster College where you will access a wide range of facilities on offer.
Training Outcome:Successful completion of the apprenticeship could lead to a higher-level apprenticeship or full-time employment for the right candidate.Employer Description:RJ Electrical & Security Ltd is an electrical contractors established in 1985. Over the last 30 years, we have provided a reliable and excellent quality of service to many commercial, industrial and domestic clients, including schools, hospitals, warehouses and offices.Working Hours :Monday-Friday 8:30 – 4:30 with ½ hr unpaid lunch.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Facilities Manager - North Lanarkshire - 40-60K plus car / car allowance - Happy to travel throughout Central Belt.CBW are recruiting for an experienced Facilities Manager to oversee the delivery of hard facilities management services across a diverse estate across the Central Belt Region. The successful candidate will ensure maintenance services are delivered safely, efficiently and in line with contractual requirements, while building strong relationships with clients, stakeholders and supply chain partners. Key ResponsibilitiesManage the delivery of planned and reactive mechanical and electrical maintenance across a multi-site portfolio.Ensure services are delivered in line with contractual requirements, KPIs, budgets and timescales.Build and maintain effective relationships with clients, building users, subcontractors and internal teams.Oversee contractor performance, ensuring work is completed safely, compliantly and to a high standard.Identify opportunities for additional works and prepare quotations where required.Monitor contract performance, manage risk and support continuous service improvement.Ensure statutory compliance and maintain accurate operational records.Skills & ExperienceProven experience managing hard FM services within a multi-site environment.Strong knowledge of mechanical and electrical building services.Experience managing subcontractors and client relationships.Commercial awareness with experience of budgets and quotations.Good understanding of statutory compliance and health & safety legislation.Excellent communication, organisational and stakeholder management skills.Full UK driving licence.Salary & BenefitsCompetitive salaryCompany car or car allowancePension schemePrivate healthcare....Read more...
Mobile Electrical Engineer - Commercial Building - Central London - Immediate start - On-going - £30 Per hour A Fantastic opportunity to work for a leading FM Service Provider situated in Central London. CBW is currently looking for a Mobile Electrical Engineer to cover 90 buildings around Central London area. The successful candidate will be Electrically biased (NVQ, C&G) with a proven track record in commercial building maintenance. Working with the maintenance team on site, this person will be required to carry out planned and reactive building maintenance. Hours/DetailsMonday to Friday08:00am to 17:00pmOn-going contract£30 per hour via umbrellaImmediate start Duties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - ResetWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsVan and travel costs includedOversee 90 buildings around Central London RequirementsElectrically qualified - City & Guilds Level 2&3, 18th edition Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient FacingImmediately available or able to start at short notice Please send your CV to Jordyn at CBW Staffing Solutions for more information.....Read more...
Skilled Operative – Cable Puller
Location: Essex / Greater London
Day Rate: £160-£200
Duration: 3months+
Our Client is a leading multidisciplinary company specialising in Electrical, Mechanical, Fire, Building and Fabric services.
Delivering innovative, high-quality solutions tailored to meet the diverse needs of our clients across a wide range of industries. Working alongside a number of leading Tier 1 contractors, including C2C Railways, CML, TfL, Taziker, SEE and many more.
The Role
We are currently looking for experienced and reliable Skilled Operatives – Cable Pullers to join our growing team, working across Essex and Greater London.
The successful candidates will have previous cable pulling experience and be confident working within an HV environment, following strict safety procedures and working as part of a professional site team.
Key Responsibilities
Carrying out cable pulling and installation activities safely and efficiently.
Operating cable-pulling equipment, including winches, rollers and other mechanical aids.
Setting up cable drums and associated equipment.
Installing and using following ropes as required.
Working under the direction of Site Managers and Team Leaders.
Working effectively as part of a team to meet project deadlines and maintain high-quality standards.
Identifying and helping resolve issues that may arise during cable installation.
Maintaining a strong focus on health, safety and environmental standards at all times.
Essential Requirements
Previous cable pulling experience – essential.
Experience working on electrical or infrastructure projects.
Experience working safely within an HV environment.
Good understanding of site health and safety requirements.
Reliable, hardworking and safety-conscious approach.
Ability to work effectively as part of a team.
Good communication and problem-solving skills.
Flexibility to work days, nights and weekends as required.
Willingness to occasionally work away from home.
Desirable
Cable jointing experience.
Experience working on rail, utilities, electrical or major infrastructure projects.
Relevant industry qualifications or training.
What We’re Looking For
We’re looking for people who take pride in their work and share our commitment to being reliable, professional and safety-conscious.
If you have strong cable pulling experience, work well within a team and are looking for an opportunity to work on major projects across Essex and Greater London, we want to hear from you.
Apply now
By applying for this role, you are consenting for C2 Recruitment to hold and process your data in compliance with the General Data Protection Regulations. Your information will always be handled securely and professionally.
To view other great vacancies at C2 Recruitment, please visit our website.....Read more...
Mobile Chiller Engineer - FM service provider - London & M25 - Paying Up to £60,000 + Package CBW Staffing Solutions are currently recruiting for a Mobile Chiller Engineer to work on behalf of an Air Conditioning & Refrigeration company based in SE London/Kent. The successful candidate will be a fully qualified Chiller Engineer with NVQ Level 2/3 in Refrigeration & Air Conditioning, F-Gas Category, City & Guilds 2079, or equivalent and a have strong understanding in the installation, maintenance, and repair of commercial and industrial chiller systems. As the Chiller Engineer you will be required to attend a number of commercial sites, Universities, Hospitals and offices covering London & SE, where you will carry out PPM on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity. You will be self-motivated, technically proficient, customer-focused, and possess excellent problem-solving abilities. In return the company is offering a competitive salary of up to £60,000, overtime, further training and a potential route into further career progression. Hours of work Monday to Friday - 08:00am to 17:00pm Key ResponsibilitiesPreventative Maintenance (PPM): Conduct routine preventative maintenance on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity.Diagnose complex mechanical, electrical, and refrigeration faults efficiently and accurately, performing effective repairs on components such as compressors, condensers, evaporators, control systems, pumps, and pipework.Carry out F-Gas leak detection, recovery, and recharging in strict compliance with current F-Gas regulations and environmental standards.Proactively identify opportunities for system optimization and efficiency improvements, advising clients on best practices and potential upgrades.Liaise professionally and directly with clients, providing clear explanations of work carried out, identifying any further required works, and building strong working relationships.Complete accurate service reports, timesheets, expense submissions, and other administrative tasks promptly and efficiently, utilizing mobile technology.Adhere strictly to all company and site-specific health and safety regulations, including risk assessments and method statements.Participate in an out-of-hours on-call rota for emergency breakdowns as required which is currently every 14 weeks.Provide technical guidance and support to junior technicians or apprentices when appropriate. In return, my client is offering a very competitive package including:25 days holiday + Bank HolidaysVan & Fuel Card providedTravel time: 1 hour each wayTablet & Work phone providedFull company uniformLots of overtime availableQualifications & ExperienceNVQ Level 2/3 in Refrigeration & Air Conditioning, City & Guilds 2079, or equivalentCurrent F-Gas Category 1 certification (Essential).Strong track record of working on various commercial and industrial chiller manufacturers.Full, clean UK Driving Licence (Essential)Strong understanding of refrigeration cycles, thermodynamics, electrical control systems, and HVAC principles.Proven ability to read and interpret electrical schematics, wiring diagrams, and technical drawings to diagnose faults.....Read more...
Data Center Operations Engineer (Night Shift)
? Reno, Nevada
Our client, a rapidly growing operator of next-generation, high-density data center facilities, is seeking a Data Center Operations Engineer to join their night shift operations team in Reno, NV.This is an excellent opportunity for a hands-on technical professional who enjoys working in mission-critical environments and wants to develop their expertise across electrical, mechanical, cooling, and IT infrastructure systems.About the RoleAs a Data Center Operations Engineer, you will play a key role in supporting the day-to-day operations of a high-availability facility. You'll help maintain uptime, perform preventative maintenance, support customer deployments, and contribute to the safe and efficient operation of critical infrastructure.Working closely with senior engineers and cross-functional teams, you'll gain exposure to cutting-edge technologies in a fast-paced, growth-oriented environment.Key
ResponsibilitiesOperations & Facility Support
- Perform equipment installations, rack and stack activities, cabling, labeling, and facility inspections.
- Execute preventative maintenance tasks and assist with corrective maintenance activities.
- Support the operation of BMS, CMMS, monitoring, and ticketing systems.
- Follow established SOPs, MOPs, and EOPs to ensure safe and consistent operations.
Infrastructure Monitoring & Troubleshooting
- Monitor electrical, cooling, mechanical, and IT systems.
- Assist in diagnosing and resolving infrastructure-related issues.
- Escalate incidents promptly and accurately to senior technical staff when required.
Customer & Remote Hands Support
- Deliver remote hands services including hardware swaps, cable tracing, power cycling, and visual inspections.
- Communicate effectively with customers and internal stakeholders regarding service requests.
- Help ensure a high level of customer satisfaction through responsiveness and attention to detail.
Documentation & Compliance
- Maintain operational records, logs, and maintenance documentation.
- Support change management and incident reporting processes.
- Assist with inventory management, asset tracking, and spare parts control.
Project & Team Collaboration
- Work alongside facilities, engineering, and operations teams on infrastructure upgrades and deployments.
- Support capacity expansion and operational improvement initiatives.
- Promote best practices around safety, quality, and operational excellence.
What We're Looking ForTechnical Skills
- Understanding of data center, critical facilities, telecommunications, or related technical environments.
- Working knowledge of electrical systems, cooling infrastructure, cabling, server hardware, or mechanical equipment.
- Strong troubleshooting and problem-solving abilities.
- Ability to follow technical procedures and safety standards.
- Experience with BMS, CMMS, monitoring tools, or ticketing systems is advantageous.
Experience Required
- 2+ years of experience in a data center, critical facility, telecommunications, industrial, or technical operations environment.
- Hands-on experience with equipment installation, cabling, preventative maintenance, or infrastructure support.
- Familiarity with mission-critical environments and operational procedures.
- Ability to work night shifts and support a 24/7 operational environment.
What Success Looks Like
- Consistent delivery of operational tasks with a strong focus on safety and accuracy.
- Effective support of maintenance activities that improve facility reliability and uptime.
- Proactive identification and escalation of potential issues.
- Accurate documentation and operational reporting.
- Continuous development of technical expertise across power, cooling, and IT systems.
- Strong teamwork and contribution to a positive operational culture.
What's on Offer
- Competitive compensation package
- Comprehensive healthcare benefits
- Retirement savings plan
- Paid time off and holiday entitlement
- Ongoing training and professional development opportunities
- Career progression within a rapidly expanding data center organisation
- Exposure to cutting-edge infrastructure supporting AI and high-performance computing workloads
If you're looking to build your career within a growing mission-critical environment and want to work with industry-leading infrastructure and technologies, we'd love to hear from you.Apply today or contact us directly for a confidential discussion.....Read more...
Pay: £45,000.00-£55,000.00 per yearJob Description:
Solar PV Installer – New Build Housing Projects£45,000 Basic Salary + £10,000 Annual Bonus (Uncapped) + Company VanAre you a qualified Solar PV Installer looking to join one of the UK's fastest-growing energy companies?We are seeking an experienced and motivated Solar PV Installer to support the delivery of renewable energy systems across large-scale new build housing developments. This is an exciting opportunity to become part of a rapidly expanding business at the forefront of the UK's transition to clean energy.The RoleWorking in a regional capacity, you will be responsible for the installation and commissioning of Solar PV systems on new build residential developments. You'll work closely with site teams, project managers, and quality teams to ensure installations are completed safely, efficiently, and to the highest standards.The role offers regional travel only, meaning you'll be home every night.What's on Offer?
£45,000 basic salary£10,000 annual performance bonus for achieving installation targetsUncapped bonus potential for exceeding targetsCompany van included25 days annual leave plus bank holidaysRegional work with no overnight staysOngoing training and development opportunitiesCareer progression within one of the UK's fastest-growing energy businessesPension scheme and additional company benefits
Key Responsibilities
Installation of Solar PV systems on new build housing developmentsElectrical testing, commissioning, and fault-findingEnsuring all work complies with current regulations and company standardsMaintaining excellent health and safety practices on siteCompleting installation documentation accurately and efficientlyWorking collaboratively with site managers, electricians, and project teams
Essential Requirements
18th Edition qualified (BS7671)Previous Solar PV installation experienceECS/CSCS cardFull UK driving licenceStrong understanding of electrical installation standardsAbility to work independently and as part of a teamExcellent attention to detail and commitment to quality workmanship
Desirable
Level 3 Electrical Qualification (NVQ or equivalent)Solar PV qualification and commissioning experienceExperience working on new build housing developments
Join UsIf you're looking for a long-term opportunity with a growing business that rewards performance, offers genuine career progression, and allows you to be home every evening, we'd love to hear from you.
Benefits:
Company carCompany pensionEmployee discountEmployee mentoring programmeSick pay
Work Location: On the road across the East MidlandsAqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.
....Read more...
Decontamination Engineer
Orpington
£45,000 - £50,000 Basic + Family Feel + Job Satisfaction + Progression + Overtime + Company Van + Tools + Laptop + Phone + Pension + Private Healthcare + Job Stability + Work-Life Balance
Join a close-knit, family-feel business where you'll be genuinely valued and supported from day one. As a Decontamination Engineer, you'll receive specialist training to become an expert on their equipment while working alongside an experienced team that is committed to your development. Enjoy excellent job satisfaction knowing your work plays a vital role in supporting hospitals and healthcare facilities across the South East, all while maintaining a healthy work-life balance.
This growing medical engineering company believes that investing in its people is the key to its success. You'll be given the training and support needed to excel in the role, with genuine opportunities for progression as the business continues to expand. If you're looking for a stable career with a company that appreciates its engineers, offers long-term security and provides a supportive working environment, this is the opportunity for you.
The Role of a Decontamination Engineer Will Include:
Service, maintenance, repairs and PPMs on autoclaves, washer disinfectors and decontamination equipment.
Electrical and mechanical fault finding, repairs and preventative maintenance.
Field Service role covering Orpington and the surrounding South East region.
The Successful Decontamination Engineer Will Have:
Previous experience servicing commercial autoclaves, washer disinfectors or decontamination equipment.
Validation experience on autoclaves is highly desirable.
Strong electrical and mechanical fault-finding skills.
Full UK Driving Licence.
Please apply or call Becka on 07458 163046 for immediate consideration.
Keywords: Decontamination Engineer, Steriliser Engineer, Autoclave Engineer, Washer Disinfector Engineer, CSSD Engineer, Medical Engineer, Medical Equipment Engineer, Field Service Engineer, Biomedical Engineer, Hospital Engineer, Sterilisation Engineer, Validation Engineer, PPM Engineer, Service Engineer, Service Technician, Maintenance Engineer, Electrical Engineer, Mechanical Engineer, Multi Skilled Engineer, Healthcare Engineer, Clinical Engineer, NHS Engineer, Healthcare Equipment Engineer, Laboratory Equipment Engineer, Life Science Engineer, Laboratory Service Engineer, Medical Device Engineer, Medical Device Technician, Decontamination Technician, Sterile Services Engineer, Sterile Services Technician, Endoscopy Engineer, Endoscope Reprocessor Engineer, Theatre Equipment Engineer, Infection Control Equipment Engineer, Decontamination Equipment Technician, Washer Disinfector Technician, Autoclave Technician, Steam Steriliser Engineer, Steam Engineer, HTM Engineer, HTM 01-01 Engineer, HTM 01-06 Engineer, Planned Preventative Maintenance Engineer, Reactive Maintenance Engineer, Commissioning Engineer, Installation Engineer, Calibration Engineer, Validation Technician, Service Technician, Biomedical Technician, Medical Field Service Engineer, Healthcare Field Service Engineer, Hospital Equipment Engineer, Orpington, Bromley, Dartford, Sidcup, Bexley, Sevenoaks, Swanley, Gravesend, Maidstone, Rochester, Croydon, Tunbridge Wells, Kent, South East London.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.
We will endeavour to respond to all applicants; however, due to the high volume of applications, we can only guarantee contact with shortlisted candidates.....Read more...
