Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe Field Service Engineer (BESS) will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Working for Edmundson Electrical CO4 9QX
After full training responsibilities will include:
Managing stock in and out (to external clients)
Picking and packing
Store transfers and stock control
Completing the paperwork within the office
Raising quotations
Main part of the role will be on the Trade counter liaising with customers
Processing orders
Some heavy lifting will be involved with loading and unloading the vans
Edmundson Electrical - Serve the country from over 250 locations, each carrying a comprehensive stock and run by friendly, experienced and highly motivated staff. We value each customer, regardless of size, and are committed to provide a comprehensive, unrivalled service and attention to quality. A major strength of Edmundson is our commitment to satisfy the demands of our customers with innovative, high quality and cost effective 'branded' products sourced from the world's leading manufacturers.
Our business constantly adapts to meet the needs of an ever changing market and our very strong relationships with our suppliers ensure that information regarding new products and trends is quickly communicated.
What is an Electrical Wholesaler?
Electrical wholesalers sell the products we all use in our homes, businesses, entertainment venues, cafes that give us access to electricity - from lighting our homes through to floodlighting a football match, from recharging a mobile phone to recharging an electric vehicle. The products you will be working with are used in domestic, industrial, and commercial settings, and are installed by contractors and electricians.Training:Completing a Level 2 Trade Supplier Apprenticeship standard (Supply chain warehouse operative) consisting of:
Knowledge and competence qualification in Trade Supplier at Level 2
Functional Skills in maths and English if required
End-Point Assessment (EPA) - final test and observation
The vocational and academic training aspects are separated and delivered by separate teams. The vocational training and assessment is conducted, more often than not, on site according to the employers wishes.
Notice of dates is agreed well in advance of a site visit. Training and assessment is conducted both on and off the job, according to the needs of the course and the learner. Every effort is made to ensure the best result is achieved by the learner. Training Outcome:Opportunities that could arise after the apprenticeship are:
Sales Team Member
Counter Sales
Warehouse Supervisor
Sales Rep
Employer Description:EDA learning and development will employ you on behalf of this employer.
We are a Flexi-Job Apprenticeship Agency who support and guide you whilst you are completing your apprenticeship within the Branch Location.Working Hours :Monday- Friday
8am- 5pmSkills: Communication skills,Problem solving skills,Number skills,Team working,Initiative,Physical fitness,Timekeeping,Enthusiasm,Keen to work and study....Read more...
Machine Tool Fitter
CNC Machinery
Nuneaton CV10 0AH
Workshop-based role with occasional travel
Salary up to £42k DOE
Permanent Role - Days
Enhanced Overtime, Bonus, Holiday, Pension
Do you have experience repairing CNC machines or machine tools? Ready for your next challenge? If the answer is yes, then please read on..
Our established client is looking for a skilled Machine Tool Fitter/Service Engineer to join their growing team. The ideal candidate will be based in the Midlands, within a reasonable commute of their Nuneaton office. The ideal candidate should have experience in installing, maintaining, servicing, and repairing manual metal cutting machinery, with skills in troubleshooting mechanical, electrical, and hydraulic systems. This is a practical role requiring both technical knowledge and strong customer service in different industrial settings.
Other job titles could include: Machine Tool Engineer, CNC Service Engineer, CNC Maintenance Engineer, Machine Tool Maintenance or similar.
The Role - Machine Tool Fitter:
- Perform routine maintenance on manual metal cutting machines to keep them running smoothly.
- Fix mechanical, electrical, and hydraulic problems in the workshop or at customer sites.
- Replace faulty parts (motors, gears, belts, electrical components)
- Install/ fit new parts.
- Use diagnostic tools to identify and fix issues.
- Provide technical support to customers, including troubleshooting and on-site help.
- Offer advice on machine performance, efficiency, and upgrades.
- Work with clients to ensure machines meet their needs and provide high-quality service.
- Keep detailed records of service visits, repairs, and maintenance.
- Write reports for customers on work completed, parts replaced, and machine performance.
- Follow safety rules and industry standards during maintenance and repairs.
- Ensure machines meet safety standards and run efficiently to avoid breakdowns and accidents.
- Build and maintain strong relationships with clients, offering ongoing support and advice.
Key Candidate Requirements - Machine Tool Fitter:
- Minimum of 3 years of CNC service, breakdown or maintenance experience
- Experience stripping down gearboxes, spindles, and/or cross-lighting machines
- CNC machine tools/metal cutting experience
- BTEC Level 3 or HNC in Mechanical Engineering or equivalent time-served experience
- Strong mechanical and electrical aptitude with the ability to diagnose and repair complex systems.
- Ability to read and interpret technical drawings, schematics, and manuals.
- Proficiency in using hand tools, diagnostic equipment, and machine tools.
- Excellent problem-solving skills.
- Strong communication and customer service skills.
- Self-motivated, with the ability to manage time and prioritise tasks.
- Strong interpersonal skills and the ability to interact professionally with clients.
- Flexibility to travel and work at various customer locations as needed.
Salary and Package - Machine Tool Fitter:
- Salary £35k-£42k
- 39.5 hours per week
- Monday - Thursday 8:00- 5:00, Friday 8:00- 4:30
- Overtime rates
- Company Pension Scheme
- Company Bonus
- Holidays: 32 days (including bank holidays)
- Opportunity to gain further qualifications long-term
Interested? To apply for this Machine Tool Fitter position, here are your two options:
1. "This is the job for me! When can I start?" - Call 0116 2545411 now and lets discuss your experience. Ask for Emma Gilmore between 7.30am - 4.30pm
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe BESS Field Service Engineer will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe BESS Field Service Engineer will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Job description
Position: Works Engineer (Mechanical & Electrical Bias)Location: BingleySalary: £40,000-£44,000 (depending on experience)Hours: Monday to Friday, 8:00 am - 4:30 pm (42.5 hours per week).Call-out and out-of-hours coverage required on a rota basis, with additional compensation for weekends and emergency breakdowns - 50 hour to be paid weekly when on call with an additional 4 hours paid per call out as standardJob Overview: We are currently seeking an experienced Maintenance Engineer to join a manufacturing facility that manufactures within the Plastics and packaging industry. The role will involve both mechanical and electrical maintenance, repairs, and improvements of machinery to ensure the smooth operation of the production process. You will be required to perform both reactive and preventative maintenance, with a focus on maintaining factory safety standards and optimising machine efficiency.Key Responsibilities:
Ensure all machinery and the factory environment remain safe and efficient for operation, with strict adherence to safety protocols.Maintain, repair, and monitor machinery to maximize production output, including gearboxes, drives, pneumatic controls, motors, and more.Regularly inspect and test safety devices (e.g., fire alarms, smoke detectors, emergency exits) to ensure they are functional and up to standard.Take quick action to resolve production machine issues, minimising downtime and production delays.Plan and undertake preventative maintenance to reduce breakdowns and ensure equipment is operating efficiently.Monitor external contractors when necessary, ensuring they adhere to safety regulations and work standards.Keep a well-organized workshop and maintain cleanliness standards to minimize contamination risk.Follow and enforce Health & Safety (H&S) guidelines and carry out necessary quality checks in line with BRC requirements.Provide out-of-hours call-out coverage and breakdown support on a rotational basis, including weekends once fully trained.
Required Skills and Qualifications:
NVQ Level 3 or equivalent in Mechanical Engineering (essential).Electrical qualifications (preferably 18th Edition IEE Regulations or equivalent).Experience with 1, 2, and 3-phase electrical systems, PLC systems, and general electrical controls (motors, drives, sensors, etc.).Strong background in mechanical maintenance including knowledge of hydraulics, pneumatics, gearboxes, bearings, conveyors, and welding.Practical experience with heavy plant machinery and factory equipment.Proven ability to work safely, adhering to all safety procedures and protocols.Proactive problem-solving skills with the ability to resolve issues promptly and efficiently.Ability to work independently or as part of a team, managing own workload and external contractor coordination.On-call availability for weekend and emergency breakdowns as part of the team rotation.
Additional Information:
Overtime is available and paid at 1.5x the basic hourly rate when necessary.The role requires a flexible approach to hours, with occasional weekend and on-call duties.28 days annual leave (including bank holidays).Salary reviews are conducted periodically based on performance and company requirements.
This is an excellent opportunity for a Maintenance Engineer seeking to develop further in a dynamic and fast-paced manufacturing environment. If you meet the qualifications and experience outlined above and are looking for a stable, long-term role with opportunities for progression, we would like to hear from you.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy
....Read more...
Job Advertisement: Multi Skilled Maintenance EngineerLocation: MirfieldShift Pattern: Continental Shift (2 Days, 2 Nights, 4 Off)Salary: £45,100 - £50,100Are you an experienced Multi Skilled Maintenance Engineer looking for an opportunity to advance your career? Join a market-leading company that values your expertise and offers a dynamic and supportive work environment.Why Join Us?
Competitive Salary – Earn between £45,100 and £50,100 annually.
Work-Life Balance – Benefit from a Continental Shift pattern, providing extended periods of time off.
Professional Growth – Engage in continuous process improvements and cross-functional projects.
Team Collaboration – Work with skilled professionals in a supportive, team-oriented environment.
Health and Safety Focus – Operate in a clean, safe setting with a strong emphasis on safety standards.
Comprehensive Benefits – Medical and DBS checks provided.
Role Overview
As a Multi Skilled Maintenance Engineer, you will be responsible for monitoring, maintaining, and repairing electrical components of production machinery. This role includes both proactive and reactive maintenance to ensure minimal downtime and maximum operational efficiency.Key Responsibilities
Perform general maintenance duties to ensure smooth operations.
Communicate details of unscheduled downtime and recommend solutions.
Engage in troubleshooting, problem resolution, and process improvements.
Maintain communication with team leaders and foremen.
Ensure seamless shift handovers.
Conduct routine maintenance per the PPM schedule.
Prioritise production stoppages over daily duties.
Perform installation work as required.
Maintain a clean work environment and uphold workshop standards.
Identify and propose improvements to production lines and machinery.
Complete necessary documentation for all maintenance work.
Stay up-to-date with role responsibilities and technical developments.
Conduct electrical tests and diagnostic checks.
Assist in training new team members.
Support cross-functional projects and initiatives.
Ensure quality service and compliance with health and safety policies.
Participate in ISO and Ethical audits.
Promote a culture of safety in the workplace.
Ideal Candidate Profile
Time-served Mechanical or Electrical Engineer or City & Guilds certificate (or equivalent) in Mechanical or Electrical Engineering, including at least 17th Edition.
Proficient in problem analysis, PLC fault finding, and reading schematic diagrams.
Strong knowledge of electrical control systems.
Fast and accurate fault-finding skills.
Keen attention to detail.
Familiarity with hydraulic and pneumatic systems (preferred but not essential).
Commitment to safe working practices.
Strong organisational skills and ability to work independently.
Previous experience in a manufacturing environment.
Experience with Computerised Maintenance Management Systems (CMMS).
Excellent communication skills and a team-oriented approach.
In-depth knowledge of health and safety regulations.
Additional Information
This full-time role requires flexibility, including working all bank holidays except Christmas and New Year, and covering for colleagues when needed.Ready to take your career to the next level?APPLY NOW! Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.....Read more...
The Team
Cundall’s Building Services team’s mission is to play a key role in making buildings more energy efficient, sustainable, and cost effective to operate – and we pride ourselves on our exemplary track record of designing innovative and sustainable mechanical and electrical solutions, that minimise the use of natural resources.
The Building Services team are a source of world leading expertise – and offer a pro-active and collaborative approach to skill development, and professional excellence.
The Role
This is an excellent opportunity for an aspiring Electrical Engineer to join our Manchester team and learn what it takes to carry out the design of electrical services on some of the most exciting projects in the UK and worldwide.
You will assist with detailed electrical building services engineering design and analysis and help define and translate client requirements into workable designs for buildings, facilities and services (electrical distribution and power generation, security and access control) all with sustainability at the forefront of the design.
You will be provided training by our expert engineers on how to perform cable sizing and protective device settings selection and shown how to use calculation software such as Amtech, SKM or Etap.
As you develop your technical engineering skills with us on real-life projects, you will also be granted day-release to study for the appropriate academic qualifications at Leeds Beckett University.
Beyond your apprenticeship Cundall can offer you support towards achieving chartership status with the IET, and in the long-term the opportunity for a truly rewarding and exciting career.
The Skills
To be considered for the role you will be required to have either of the following:
Have at least three A levels at Grades A* - C (104 UCAS points) in STEM related subjects (Science/Technology/Engineering/Mathematics)
Completed a Level 3 BTEC/Apprenticeship as a Building Services Design Technician.
Completed a HND qualification.
Taken part in the PlanBee scheme you will also qualify for this course.
During your studies and/or work experience to date you have developed a keen interest in engineering and/or construction.
You have a keen interest in learning new skills and are willing to work hard to reach your goals.
You possess the personal qualities and organisation skills to work under pressure and to tight deadlines, are a confident communicator, looking for a career in creative, sustainable, and intuitive design.
Training:
As you develop your technical engineering skills with us on real-life projects, you will also be granted day-release to study for the appropriate academic qualifications at Leeds Beckett University.
Training Outcome:Beyond your apprenticeship Cundall can offer you support towards achieving chartership status with the IET, and in the long-term the opportunity for a truly rewarding and exciting career.Employer Description:Established in the UK in 1976, Cundall is a global, independent, multi-disciplinary consultancy delivering sustainable engineering and design solutions across the built environment. Operating from 26 locations across the globe, our dedicated teams of over 1,000 consulting engineers and designer are empowered to act with flexibility and agility in delivering sustainable engineering and design solutions tailored to suit our clients’ individual needs. We are proud to be at the centre of pioneering design on some of the most exciting projects around the world.
Cundall was founded with a commitment to sustainable design. In July 2023, Cundall publicly committed to achieving net zero carbon on all its projects by 2030. The pledge recognises the critical need for practical, science-led action to transition all buildings, infrastructure, and human settlements to net zero carbon as rapidly as possible.Working Hours :Monday to Friday, shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Number skills,Analytical skills....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities:
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including:
System-level analysis (FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.)
Documentation (Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.)
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements:
Master???s degree in engineering (Aerospace, Mechanical, or Electrical engineering preferred).
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis (FMECA)....Read more...
Holt Engineering is looking for a PCB Inspector for a growing manufacturing business in Fareham!
As a PCB Inspector you will play a pivotal role within the business, you will be working within goods in, stage and final inspection of electrical & electronic assemblies.
This role is temporary to permanent and paying £12-£13.50ph DOE. Working hours are Monday to Thursday 7:30-16:30 and Friday 7:30 to 12:30.
Key Responsibilities for PCB Inspector
- Inspection of Electrical & Electronic Assemblies.
- Calibrated Tool control issuing & approval.
- Assist with First Article Inspection
- Assist in the resolution of quality-related problems.
- To work with the Quality Controller to develop, improve & maintain quality standards across the areas of responsibility.
- To work with the Quality Controller
- Proactively advise management of any issues
- Provide QA support as necessary.
- To assist the Quality Controller in the diagnosis of quality problems.
To be considered for this PCB Inspector role:
- IPC Trained would be advantageous but not essential
- Ability to read & understand complex Engineering drawings & instructions.
- Previous experience inspecting electronics is essential
- Structured and logical approach to problem-solving.
- Able to work independently as well as within a team
- Excellent communicator
- Good time management skills
Sounds like a good fit? Please call Sam on 07485 390946 or APPLY NOW for this advert!....Read more...
MET Technician / Strip Fitter Role:
- Up to £58,000 per annum
- Pension and great company benefits
- Growing Bodyshop Group room for Training and progression.
- Permanent Role
Our client, a busy Accident Repair Centre in the Northampton area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £58k Bodyshop Northampton
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician / MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
An excellent opportunity has arrived for an Electrician, with our longstanding client in Northumberland. They are looking to add an Electrician to their team who will be covering the Northumberland area!Salary: £43,000 + Company Vehicle Job Type: Permanent Working Hours: 37 hours per week (Mon-Fri)Responsibilities include:
You will be responsible for general maintenance and improvements to domestic and void properties such as responsive repairs and testing and inspecting.
Undertake electrical work and installations associated with repairs, maintenance, refurbishment, and ensure all work undertaken is completed to a high standard.
Pre-inspect and diagnose selected repair requirements.
Ensure that repairs and maintenance improvement works are undertaken in a considerate manner within agreed timescales, meeting customer satisfaction and needs.
Candidate Requirements:
NVQ Level 3 Electrical Installations
18th Edition.
Inspection and Testing (City and Guilds 2391 or equivalent) is Desirable
Experience within similar roles
Full UK Driving License
Apply now, or email your CV to dominic.ross@servicecare.org.uk....Read more...
My client are seeking a Technical Field Service Engineer covering the Midlands to the North of England for a world leader in complex automated capital equipment. They design and manufacture a range of high value, complex, electrical powder coating industrial equipment for a range of industries.
The Technical Field Service Engineer will be responsible for supporting customers, repairing and maintaining powder coating equipment, ensuring optimal performance and customer satisfaction.
Key Skills and experience of the Technical Field Service Engineer, covering the Midlands to the North of England will require a strong electrical understanding, including troubleshooting, fault finding and repairing of capital equipment. The territory of this position will cover predominately the Midlands to the North of England including areas such as, Birmingham, Manchester, Stoke, Leeds.
This is a fantastic opportunity for a Technical Field Service Engineer to join a well-established, successful company offering good career prospects.
APPLY NOW for the Technical Field Service Engineer in covering the Midlands to the North of England, by sending your CV to TDrew@redlinegroup.Com quoting ref. THD1316. Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 84 or 07961 158762.....Read more...
Main Duties:
Dismantling/ repairing of AC & DC rotating machinery. Electric motors, pumps, fan units.
Attending site as part of a team to carry out removals & refits.
Repairs/ renewals of all electrical rotating machinery. Electric motors, pumps, fan assy’s, AHU’s, site maintenance, site repairs/ removals/ refits.
Day to day contact- Gavin Whitehouse (workshop co-ordinator)
Would be one of 8 engineers within the company.Training:
The learner will be studying the Maintenance and Operations Engineering Technician Level 3 Apprenticeship Standard qualification.
Functional skills will be studied if equivalent qualifications are not held.
Training Outcome:Opportunity for a full-time role on completion. Opportunity to head up a ‘Site team’. Opportunity to lead a workshop team.Employer Description:Repairs/ renewals of all electrical rotating machinery. Electric motors, pumps, fan assy’s, AHU’s, site maintenance, site repairs/ removals/ refits.Working Hours :Monday - Friday, between 8am and 5pm.Skills: Communication skills,Attention to detail,Logical,Team working,Initiative....Read more...
Join our leading International Aerospace and Defence company. We are seeking a highly skilled Senior Systems Engineer to play a critical role in supporting our current engine development program. This is an exciting opportunity to contribute to the development of a complex, multifaceted rocket engine system composed of numerous components.
Key Responsibilities:
Manage the Design, Verification, and Compliance Matrix at a top level.
Oversee the overall engine system architecture, including:
System-level analysis (FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, etc.)
Documentation (Design, Design Justification Document, Software Requirements Specification, Engine Test Plan, etc.)
Collaborate with the Project Manager to plan and organise project tasks and resources.
Support the engine system build, assembly, and test development process by reviewing route cards, build sequences, and integration processes.
Key Requirements:
Master???s degree in engineering (Aerospace, Mechanical, or Electrical engineering preferred).
Minimum of 5 years of experience in complex product development within the industry.
Proven track record as a technical leader with clear communication skills, leading large multidisciplinary and multicultural engineering teams.
Understanding of Electrical or Harnessing Design, routing, and schematic.
Proficiency in System Thermal Equipment design and selection.
Knowledge of System Analysis, including but not limited to: Fluidic Analysis, Performance Analysis, Thermal Analysis, Radiation Assessment, Failure Modes Effects and Criticality Analysis (FMECA)....Read more...
Ensure the safe and efficient performance of every production task in compliance with company procedures, approved engineering data and local Health and Safety requirements
Ensure Safe Systems of Work and risk assessments (assisting as necessary in the completion of risk assessments) are adhered to for all engineering activities
Producing Prototype assemblies for evaluation to Engineering instructions and legislation with the support of the Engineering team
To prepare assembly and test documentation and reports by collecting and analysing information in collaboration with technical team
Produce Prototype components using a variety of machinery, tools and materials
Conduct both electrical and mechanical testing on prototype equipment in line with international standards and Engineering needs
Produce and modify Engineering drawings in line with company standards
Produce Engineering build instructions for Manufacturing sites UK and overseas with the support of Industrial Engineering team
Feedback technical information to Engineering project teams to help make informed decision in a timely manner in-line with project goals
Help support Prototype and design engineers on external testing in both UK and overseas facilities
Training:Engineering Technician Level 3 Apprenticeship Standard:
To become conversant in Engineering practice within the company, including Prototype assembly (electrical / mechanical) Prototype test (electrical / mechanical) Engineering drawing and design, Engineering reports
This will be achieved by completing 10 months full time engineering college education, 12 months engineering rotations and then specialising in the prototype department for final 2 years
Training Outcome:
Unlimited career progression possibilities in multiple engineering focussed departments, this coupe lead to leadership opportunities and potentially overseas placements
Employer Description:Lucy Electric is an international leader in intelligent secondary power distribution products and solutions, with features such as remote operation and monitoring. Linking energy generation to consumption, the business specialises in high-performance medium and low-voltage switchgear for utility, industrial and commercial applications.Working Hours :Shifts to be confirmedSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative....Read more...
In the workshop, working alongside experienced staff, you will work on building automation and control panels according to our customer’s needs.
You will apply the principles and practices for the termination and connection of conductors, cables and cords in electrical systems
How to prepare the preparation and installation of wiring systems and electrotechnical equipment
How to prepare for the inspection, testing, commissioning and certification of electrotechnical systems and equipment
The electrical principles associated with the design, building, installation and maintenance of electrical equipment and systems
Follow health and safety and environmental regulations, guidance notes and relevant codes of practice required within our company
Initially, you will work in the workshop in Tockwith. Depending on age and ability, you may also be required to be able to support the field team for site installations. It is hard to describe a typical day, because every customer, every challenge is a new one.Training:You will attend York College on a block release basis: approximately one week at college per month during the academic year.Training Outcome:Once the apprenticeship is complete, the company does not have a defined career progression. However, on an individual basis, the company owners are open to supporting further qualifications that will also be beneficial to our company. This is not usually done immediately after completing your apprenticeship but having worked with us for several years afterwards. All employees do regular training required for their position as well as further technical qualifications.Employer Description:For nearly 20 years, Total Automated Solutions have built both an outstanding team and a great reputation across multiple industry sectors. We offer a wide range of automated engineering solutions, and we listen to our clients’ individual needs to tailor our services to their specific requirement. We design, build and install control and automations panels for various industry sectors. No two days are the same.Working Hours :Monday to Thursday 7.30 am to 4.30pm, Friday 7.30 am to 1.30 pm. No shifts, evenings or weekends expected.Skills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Maintenance EngineerAn excellent opportunity has arisen for an Electrical Bias Maintenance Engineer to join our team based in St Neots on a permanent basis. You will be responsible for the maintenance and repair of process equipment for the maintenance department ensuring that the equipment is reliable and working optimally to improve plant and building performance. The shift pattern is working only 4 days out of 10!Job Responsibilities
To ensure a high standard of maintenance to attain factory performance goalsElectrical setup and production supportFault finding and repair of breakdownsTo be fully aware of factory safety issues and work in a safe manner at all timesPerformance of Preventive MaintenanceFabrication and installation of Plant and Machinery under supervision.
Person Specification
Experience of Production equipment, maintenance in a diverse factory environmentGood diagnostic skillsElectrical maintenance experienceComputer literate (stores systems and Maintenance Management Systems)
Hours of WorkYou will start training on the day shift and then move onto your set shift pattern where you’ll be rostered to work 1758 hours per annum. This consists of 143 rostered 12 hours and 15 minutes shifts (usually between the hours of 6.45am to 7pm, 6.45pm to 7am) and one 6-hour training session.The Shift pattern is usually:
2 day shifts
6.45am to 7pm
2 night shifts
6.45pm to 7am
6 days off
The Company will aim to give at least 2 weeks’ notice if a change to the published roster is required. Holiday entitlement is built into time off shift so the employee cannot book days off. They can do shift swaps to create more time off.Pay and Benefits
£45,500 per annum increasing to £47,000£250 annual tool allowanceOvertimeOnsite free parkingChildcare vouchersVery generous company pension....Read more...
An exciting opportunity has arisen for an Installation and Commissioning Technician to join a forward-thinking and innovative company. This role involves installing and commissioning onboard systems such as CCTV, passenger-counting devices, onboard media, telematics, and communication routers on a range of vehicles, primarily buses but also cars and trucks. There are multiple roles available across the UK ranging from Manchester, Leeds, Sheffield, Leicester, Birmingham, Milton Keynes, Watford, Oxford, Reading, London and Essex.
The successful Installation and Commissioning Technician based in Manchester, Leeds, Sheffield, Leicester, Birmingham, Milton Keynes, Watford, Oxford, Reading, London and Essex will work both independently and as part of a team, ensuring high-quality installations and system commissioning. You will be supported by a technical team and project engineers, working together to deliver projects on time and within budget.
Key Responsibilities:
Commissioning new onboard systems and ensuring seamless integration with the company's portal.
Installing and configuring vehicle systems, including final setup and commissioning.
Assisting project engineers to ensure best practices are followed during installations.
Providing accurate and timely progress reports, including daily worksheets and email updates.
Liaising effectively with office staff and customers to ensure smooth project delivery.
Managing issued stock and returning unused items in line with company procedures.
Maintaining a clean and safe working environment at all customer sites.
Representing the company professionally, ensuring the company vehicle and equipment are well-presented.
Skills and Experience:
Proven experience working with vehicle electrical systems (cars, buses, or trucks).
Relevant qualifications in Electrical, Auto Electrical, or EV awareness (advantageous).
Excellent communication skills, both internally with colleagues and externally with customers.
Ability to work independently and as part of a team.
Full UK driving licence.
Valid passport.
Experience working to health and safety requirements (advantageous).
Willingness to undergo a basic DBS check.
APPLY NOW for the Installation and Commissioning Technician position in Manchester, Leeds, Sheffield, Leicester, Birmingham, Milton Keynes, Watford, Oxford, Reading, London and Essex. Apply by sending your CV and cover letter to LTemple@reldinegroup.Com or contact us on 01582878820....Read more...
Small Works Electrician - Commercial Portfolio – London, M25 - up to £45,000 per annum Exciting opportunity to work for an established national Service Provider company situated in London. CBW is currently recruiting for an established Small Works Electrician to work in the existing projects team. The ideal candidate will have a strong background in projects, will work in a number of commercial retail contracts based within London. In return, the company is offering a competitive salary of up to £45,000, further training, and career progression. Hours of work & SalaryMonday to Friday - 08:00am to 17:00pm - 40 hour weekWill have to work some night shiftsUp to £45,000 per annumCompany Van & Fuel cardOvertime rates x1.5 weekdays and double time at the weekendKey ResponsibilitiesEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Carry out electrical installation works as required both in and out of hours.Work as part of a team utilising other skills as required.Procure materials in coordination with the Project ManagerPre-Start meeting before working with internal teamsBe available to attend or manage critical call-outs and provide written incidents reports as required including preparing the basis of the quotes for the remedial works required.Ensure the annual PAT testing of tools and equipment are kept up to date.Carry out engineering works as directed by the Project Managers.Assist in the production of quotes as required for Managers across the business.Production of Test and Commissioning CertificatesGeneral overseeing of Project works and reporting RequirementsNVQ level 3 Electrotechnical essential18th EditionA good knowledge of electrical servicesSound level of administration and organisational skillsProven practical experience within the electrical industryCommitment to providing a high-quality service and willing to work flexiblyWork overtime when requiredMechanical experience desirable but not essentialPlease contact Dan Barber at CBW Staffing Solutions for more information ....Read more...
Night Shift Engineer (4 on 4 off Shift) - Client Direct - Commercial Estate – Canary Wharf, East London - £57,000Are you electrically qualified?Are you looking for a night shift position?Are you happy to work in the Canary Wharf?If yes, then read on...…Exciting opportunity to work for a Direct Client situated in the Canary Wharf, East London. CBW are currently recruiting for a Night Shift Maintenance Engineer to be based in a retail estate located in Canary Wharf, East London. The successful candidate will be electrically biased (C&G, 18th Edition) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, He or she will be required to carry out electrical and mechanical planned and reactive maintenance to the following. In return the company is offering a competitive salary of £57,000, further training, overtime and career progression. DutiesElectrical - Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)GeneratorsPumps, Motors, Seals, BearingsEmergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work4 nights on 4 Nights off19:00pm - 07:00am Package£57,000 Salary Including Shift allowance25.5 Shifts Holiday12.5% Pension contribution from employerPrivate healthcare and dentalCycle to work schemeLife assuranceSubsidised gym membershipOvertime AvailableCareer ProgressionTraining (Internal and External Courses)RequirementsElectrically QualifiedCity & Guilds - Level 3City & Guilds - 18th EditionA proven track record in Building Maintenance workingGood Communication Skills.Multi-Skilled - Mechanical / ElectricalKnowledge of UPS / Generators / Power DistributionTraceable work HistoryPlease send your CV to Fin Havering of CBW Staffing Solutions for more Information! ....Read more...
Shift Electrical Maintenance Engineer - FM Service Provider - Commercial Estate - Crawley - Up to £47,000 per annum Exciting opportunity to work for a leading FM service provider situated in Crawley . I am currently recruiting for a Multi-Skilled Electrical Maintenance Engineer to be based in a large commercial state.The successful candidate will be a fully qualified Electrical Maintenance Engineer with C&G / NVQ level 2 & 3 and a proven track record in commercial building maintenance.He or she will be required to carry out M&E/Fabric planned and reactive maintenance in a large team on a large building responsible for all the landlord services. Working with the maintenance team of engineers on site, you will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary of £47,000, overtime and career progression. Key Duties:Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lighting & Fire Alarm Test'sPresurisation UnitsHVAC plantPlant room maintenanceAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)BMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricEscort sub contractorsHours of workMonday - Thursday / Tuesday - Friday on rotation Days and Nights 10 Hour Shift 07:00am to 17:00pm / 21:00 to 07:00 PackageBasic Salary up to £47,00020 Days Annual Leave + Bank HolidaysFree Parking on site Pension Internal and External Training CoursesGenuine career progression Lots of Overtime available. RequirementsElectrically Qualified - You must be able to provide copies of your trade certificatesCity & Guilds / NVQ Level 2&3 Must be able to pass security clearance A proven track record in commercial maintenanceExcellent customer service skillsHonest, hard working and reliable Please send your CV to Tom Gotts at Cbw Staffing Solutions for more Information!....Read more...
Undertake a period of training to acquire the skills to be able to install, maintain and repair electrical systems in industrial, commercial and domestic environments to the required standard
Electricians might work in both indoor and outdoor settings
Electrical equipment and systems may include switchboards, motors, cables, fuses, thermal relays, fault current protection switches, heating, lighting, air conditioning and metering equipment as well as crime and fire alarm systems and renewable energy technologies
Learn how to set out jobs from drawings and specifications
Work within various repair teams and shadow other operatives
Complete a weekly timesheet and other paperwork associated with your role
At all times, wear appropriate personal protective clothing and equipment relative to the task
Attend all college and training courses and progressing through and applying the learning, training and experience
Comply with all health and safety policies and procedures, using and safely operating a range of tools associated with your job role
Participate in Derby Homes Performance Review Scheme
Undertake any additional duties commensurate with the apprentice post
Training:
An apprenticeship includes regular training with a college or other training organisation
At least 20% of your working hours will be spent training or studying
Training Outcome:
There is no guarantee of a permanent position at the end of the apprenticeship, however, opportunities and vacancies will arise which apprentices can apply for
Employer Description:Derby Homes Limited is an arm's length management organisation (ALMO) created by Derby City Council to manage, maintain and improve its council houses and estates. The organisation is non-profit making and it does not pay dividends to any shareholders. It is 100% owned and controlled by Derby City Council. Our mission statement is "High quality services for people, homes and communities."Working Hours :Monday- Thursday
8am to 4pm
Friday
8am to 3.30pmSkills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Team working,Creative,Initiative,Non judgemental,Patience,Electrical interest....Read more...
Field Service Engineer
Crawley
£32,000 - £42,000 + Overtime (OTE £48,000) + International Travel + Training + Industry Specialist + Great Working Environment + Team Environment + Package
Are you an experienced Field Service Engineer looking for an opportunity to specialise within a rapidly growing industry? Due to a period of growth, this organisation are looking for the right engineer to oversee a variety of projects and equipment. All relevant product training will be provided to up-skill and become a real specialist in a healthy industry.
The right Field Service Engineer will have a sound mechanical and electrical understanding, ideally with heavy equipment. This opportunity grants an engineer the opportunity to travel internationally and take control of their earnings with regular overtime and technical progression.
The role of the Field Service Engineer will include: *Carrying out servicing, maintenance, repair and installation *International travel *On-call rota
The successful Field Service Engineer will have: *Electrical/Mechanical NVQ qualification and background *Automated gate experience (desirable) *CSCS is advantageous *Full driving licence
For immediate consideration please call George on 07458163036 and click to apply.
Keywords: field service engineer, field, service, field engineer, service engineer, breakdown, maintenance, repair, reactive breakdown, electrical, mechanical, multi-skilled, Crawley, Guildford, Redhill, Crowborough, Lindfield, Burgess Hill, East Grinstead, Tonbridge, Horsham
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at (url removed) to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Are you a Qualified Electrical Project/Contracts Manager with experience? Do you share our Company Core Values; Structure, Passion, Workmanship, Delivering & Integrity? Yes? We want you!Your time will be split between Project managing the works won as contracts manager, ensuring a smooth handover from winning the job, to job completion.You will be the main point of contact for engineers and be available to answer any technical questions when required.Your responsibilities will include:
To be a QS for the NICEIC Registration & Complete Annual AssessmentsTo quote & win worksTo ensure projects run smoothly, and within budgetTo assist with all certification & QS CertificatesTo assist with ongoing training & development with StaffTo assist with Testing ProceduresComplete calibration of testing equipmentAssist with Health & Safety Procedures and ensuring complianceTo assist with site procedures, and ensure staff follow correct procedures
Key Essential Requirements:
Full UK Driving License18th Edition of BS7671Competent in Testing & InspectionLevel 3 NVQMust have own toolsMinimum 7 years’ experience as an Electrician/Electrical SupervisorProject Management Experience
Preferred Requirements:
ECS CardSMSTSLevel 4 Award in Design and verification of Electrical InstallationsInspection & Testing 2391 qualification or equivalentExperience of being a QS (Qualified Supervisor)
Benefit Package:
Company Pension schemeQuarterly Target & Performance Based Bonus21 Days holiday plus bank holidays1 Additional Days holiday awarded for each year served, capped at 5Training and Upskilling providedVehicle & Fuel Card providedEmployee Assistance ProgrammeEmployee Excellence Award
How to ApplyIf this role is of interest and you would like to learn more, please attach your CV to the link provided and we will be in direct contact.....Read more...
