We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and, depending on performance and availability, progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer.
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
CAD Technician
We are seeking a CAD Technician / Design Engineer to join our innovative team. This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and taking New Product Introduction (NPI) projects from concept to production.
As CAD Technician / Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings. The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Be a CAD Technician / Design Engineer with at least 2 years post graduate experience.
Or be a graduate CAD Technician that can show solid proactive experience.
Be happy working with New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Ideally have graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
How to Apply:
To apply for this CAD Technician / Design Engineer role please send your CV to Robert Cox Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RCA - CAD Technician....Read more...
CAD Technician
We are seeking a CAD Technician / Design Engineer to join our innovative team. This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and taking New Product Introduction (NPI) projects from concept to production.
As CAD Technician / Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings. The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Be a CAD Technician / Design Engineer with at least 2 years post graduate experience.
Or be a graduate CAD Technician that can show solid proactive experience.
Be happy working with New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Ideally have graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
How to Apply:
To apply for this CAD Technician / Design Engineer role please send your CV to Robert Cox Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RCA - CAD Technician....Read more...
CAD Technician
We are seeking a CAD Technician / Design Engineer to join our innovative team. This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and taking New Product Introduction (NPI) projects from concept to production.
As CAD Technician / Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings. The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Be a CAD Technician / Design Engineer with at least 2 years post graduate experience.
Or be a graduate CAD Technician that can show solid proactive experience.
Be happy working with New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Ideally have graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
How to Apply:
To apply for this CAD Technician / Design Engineer role please send your CV to Robert Cox Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RCA - CAD Technician....Read more...
CAD Technician
We are seeking a CAD Technician / Design Engineer to join our innovative team. This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and taking New Product Introduction (NPI) projects from concept to production.
As CAD Technician / Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings. The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Be a CAD Technician / Design Engineer with at least 2 years post graduate experience.
Or be a graduate CAD Technician that can show solid proactive experience.
Be happy working with New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Ideally have graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
How to Apply:
To apply for this CAD Technician / Design Engineer role please send your CV to Robert Cox Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RCA - CAD Technician....Read more...
CAD Technician
We are seeking a CAD Technician / Design Engineer to join our innovative team. This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and taking New Product Introduction (NPI) projects from concept to production.
As CAD Technician / Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings. The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Be a CAD Technician / Design Engineer with at least 2 years post graduate experience.
Or be a graduate CAD Technician that can show solid proactive experience.
Be happy working with New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Ideally have graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
How to Apply:
To apply for this CAD Technician / Design Engineer role please send your CV to Robert Cox Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RCA - CAD Technician....Read more...
Undertake appropriate job preparation prior to commencing repair, including safety precautions, panel preparation and body measurements
Identify the material used in the construction to enable the correct joining techniques and manufacturer specifications to be adhered to
Interpret relevant technical data and methods to make sure that all joints are in line with vehicle manufacturer specifications and the vehicle/body panels are aligned correctly
Ability to identify and understand the correct joining technology.
Remove, repair, and replace vehicle body panels and components of the vehicle safely and efficiently
Operate the correct repair tools, equipment and devices used in the process, panel pulling systems, jig and alignment tools, spot welders, brazing tools
Identify and communicate supplementary damage such as panels that were deemed to be repairable but once worked on, were found to be beyond repair, along with damage that could not be established on original inspection
Ability to detect and rectify faults within a vehicle's structure that’s integral to its safety
Maintaining high standards of housekeeping
Training:
Our training partner will deliver a high-quality Level 3 Vehicle Damage Panel Technician programme here in our state-of-the-art bodyshop
No college attendance required as training will take place onsite
You will work alongside a highly skilled mentor who will support you in becoming a skilled and qualified vehicle panel technician
Level 3 Vehicle Damage Panel Technician apprenticeship standard
Apprentices without level 2 English and maths will need to achieve this level prior to taking the end-point assessment
Training Outcome:
Following completion of your apprenticeship, you can expect full-time employment as well as opportunities to progress within the company into roles such as Workshop Controller, Vehicle Damage Assessor or Bodyshop Manager
Employer Description:As one of the UK's leading repair groups, East Bilney Coachworks is dedicated to delivering a premium service and quality repairs.
Based in the East of England, East Bilney Coachworks combines the use of state-of-the-art and conventional technologies to repair a varying range of vehicle types. Our sole aim is to offer our customers the complete repair solution and is supported through our continued investment in technology and training, as well as our ability to remain flexible and dynamic amidst evolving market trends.
Since trading began in 1975, East Bilney Coachworks has maintained strong working relationships with many insurers and manufacturers, whilst enhancing our constantly expanding customer base year upon year.Working Hours :Typically 8.00am - 5.00pm, Monday to Friday.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness....Read more...
Answering high volume of telephone calls.
Dealing with a variety of nationalities.
You need to be extra helpful.
Transfer calls appropriately or take messages and pass these on.
Register people who are looking for work –online or face to face.
Complete and attach all relevant forms, ID, checks to a candidates online file.
Greet customers who come into the office and assist them with their queries.
General Administration where required.
Assisting the Consultants in making telephone calls and completing their admin.
Attending events such as Job Fairs with more senior members of staff to speak to job seekers / employers.
Creating media and social media posts, sending out mailshots to targeted people.
Provide office support to the Sales staff and Manager.
Reporting and data management.Potential for permanent employment for the right candidate.
Opportunity to progress to higher level apprenticeships.
Being an apprentice will help you develop professional skills whilst earning a salary with some of Kent’s best companies.
Gain professional skills and experience to enhance your CV and make it more attractive to potential employers.
Training:
On the job training with the employer whilst working towards the Apprenticeship Standard.
Regular work-based assessments/observations carried out by Kent Training & Apprenticeships Tutor Assessor, to determine competency and meet with Awarding Body standards.
Training Outcome:
Potential for permanent employment for the right candidate.
Opportunity to progress to higher level apprenticeships.
Being an apprentice will help you develop professional skills whilst earning a salary with some of Kent’s best companies.
Gain professional skills and experience to enhance your CV and make it more attractive to potential employers.
Employer Description:MC Personnel is a locally based company established in 1998. We have 3 busy offices across Kent specialising in the overall requirements of the Industrial, Engineering, Catering, Office & Driving business sectors throughout Kent, SE London and Essex. As an independent company we are free to provide our clients with a bespoke service. Our qualified, dedicated consultants work very closely with both our clients and candidates, as we believe that working together results in success through greater understanding.Working Hours :Monday - Friday, 9.00am - 5.30pm (45 minute lunch break and 15 min tea break).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Logical,Team working,Initiative,Non judgemental,Patience,Professional Approach,Conscientious,Good Time Management....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Manager, Field Operations will develop and implement strategic plans to align Tremco Barrier Solutions (TBS) field operations with organizational goals, foster a culture of safety, grow the business, and drive process and policy improvements for maximum efficiency and output. Effective planning, communication and execution are critical competencies necessary for success in this role.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage. Applies the company's policies and adheres to processes to ensure compliance and organizational best practices. Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained. Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Promote and maintain a safety culture in all installation activities. Establish, define, and communicate a clear strategic direction and targets for goal attainment for the team. Act as an agent of change and improvement to drive resilience, versatility and adaptability, facilitate a culture of teamwork and excellence, as well as timely acceptance to changing business priorities. Oversee the development and execution of key TBS initiatives to enhance field operations and ensure consistent communication of Tremco CPG and business operations initiatives. Drive resource development and allocation strategies to support additional services and products while continuously exploring opportunities for new resources and partnerships. Strategically manage inventory and equipment resources, ensuring optimal allocation, maintenance, and use to support field operations. Oversee budget management and financial planning for field operations, ensuring alignment with organizational financial goals and adjusting strategies as needed. Monitor the industry and market, identify trends, correct utilization metrics, address gross margin and/or operating income concerns, and correct poor performance to prevent future repetitive issues. Forecast, analyze, and report regularly on established key performance indicators (KPIs). Establish criteria for success and provide leadership for the achievement of goals. Monitor key performance and safety metrics, develop comprehensive reports and communicate outcomes to senior leadership and stakeholders. Assess daily operational situations for crisis management, safety and escalation protocol. Develop workforce planning, recruiting, and retention strategies to maintain optimum performance. Ensure high standards of quality and customer satisfaction through strategic oversight while championing outcomes across field and operational teams as well as external partners and vendors. Oversee quality control, schedule random site visits to current and previous job sites, review documentation, and assess customer satisfaction regularly. Model, uphold, and promote professional standards within the field teams to ensure a high level of service delivery, professional conduct and appearance, and safety-first mentality. Ensure company policies and procedures are implemented, communication and followed in accordance with organizational standards. Oversee, conduct, and provide all related employee training, including but not limited to compliance protocols, safety expectations (OSHAS Hazard Awareness, Toolbox Talks, Vehicle Safety/DOT training, etc.) process standards, and customer satisfaction requirements. Effectively lead and foster professional, clear, direct, and timely communication internally and externally. Act as a liaison between headquarters and the field, lead and encourage effective two-way communication. Manage communication with TBS field operations, executive leadership, and key stakeholders to ensure alignment on initiatives and objectives. Facilitate regular strategic communication with sales, management, leadership and other key stakeholders to proactively identify potential challenges, develop resolutions and execute accordingly. Leverage collaborative relationships to address higher-level discrepancies and ensure alignment between field operations and sales objectives including but not limited to field resource management, workload balance, job site conditions, product management issues, etc. Manage administrative requirements including but not limited to expense management, timecards and time management, monthly sales projections, status reports, large job approvals, sales quotes, project specifications, etc.
EDUCATION REQUIREMENT:
High school diploma or GED required; Bachelor's degree in related field such as construction management, business, management, communications, etc. preferred.
EXPERIENCE REQUIREMENT:
With a high school diploma or GED, 5 years of related management experience in customer service, business, construction or services related experience is required. With a Bachelor or higher degree, a minimum of 3 years related management experience required; education will be considered in lieu of experience. On-site construction safety experience is required.
CERTIFICATES, LICENSES, REGISTRATIONS:
OSHA 10-hour training preferred
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to lead and manage a team focused on safety, customer satisfaction, resource productivity, and business profitability. Proven communications skills (written, verbal, presentation, and listening) to clearly, concisely, directly and effectively relay information up, down and across. Financial acumen to meet established balance sheet expectations. Demonstrate leadership qualities necessary to drive cultural change and business growth. Collaborative mind-set Demonstrate a working knowledge of all services provided and how to manage warehouse and equipment assets while complying with state and federal standards. Proficiency with Microsoft Office Suite (Word, Excel, Outlook, MS365, etc.) Technology savvy, familiarity with SAP a plus. Local travel up to 75% of the time to local job sites will be required. Overnight travel up to 50% of the time will be required.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, and lift up to 50 lbs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Role Overview As a Tax Trainee or Apprentice, you will gain hands-on experience across our corporate and personal tax departments. Working closely with our tax managers and senior team members, you’ll develop valuable skills and knowledge while working towards a formal tax qualification. Key Responsibilities Assist in the preparation of personal tax returns and provide support for corporate tax tasks. Manage a personal tax client portfolio over time and learn new skills with senior mentors. Help achieve the team’s objectives of client service excellence and growth. Utilise initiative and responsibility in producing high-quality, accurate work. Training:Professional Accounting Taxation Technician Apprenticeship Level 4 - ATT A key role within any accountancy and finance function, individuals undertaking this apprenticeship will hone their ability to create, verify and review accurate and timely financial information. This apprenticeship can suit a variety of financial functions as there are a range of qualifications available to suit your organisation. The ATT qualification gives you the knowledge and practical skills to work in tax compliance. After qualifying, you can progress onto CTA and become a chartered tax advisor. The ATT syllabus follows a modular structure, which consists of two core certificate papers and four optional certificate papers, allowing you to specialise in your own area of interest or expertise. You must also complete three computer-based exams (Law, Professional Responsibilities & Ethics and Accounting). Compulsory units include: Personal Taxation (PT) Business Taxation (BT)
Optional units include:
Business Compliance (BC)
Corporate Taxation (CT)
Inheritance Tax, Trusts & Estates (IHTTE)
Value Added Tax (VAT)
You will also be required to complete an End Point Assessment (EPA), which will include a role simulation exam and portfolio with reflective statement
Training will be provided by attending either face-to-face classroom-based lessons or Live Online. An apprenticeship has to be relevant to the job you are undertaking and you must dedicate 20% of your time towards it.Training Outcome:For the right candidates there would be progression opportunities to further qualifications, and/or progression to Senior/Assistant Manager over time. .Employer Description:At Plus Accounting, we believe that our team is the heart of our success, playing a vital role in achieving our company’s goals. We are committed to building a culture where every individual thrives, ensuring we attract and retain talented professionals who share our values. As a certified B Corp, our commitment goes beyond compliance and performance — we prioritise people, the planet, and sustainable growth. Working Hours :0900 - 1700 Monday to FridaySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
During the Dental Nurse Apprenticeship, you will receive ongoing support, development and training to equip you with the skills and knowledge required to qualify and have a successful career in dental nursing.
Your daily activities could include:
Assisting the dentist in providing safe and effective treatments to patients, from simple check-ups to advanced specialist treatments
Providing patients with a high level of care
Setting up and cleaning surgery
Sterilising instruments
Updating patient records
Maintaining equipment
Preparing instruments and materials for various treatments
Adhering to practice policies and procedures
The use of VR Technology
During your working day, the dental practice will support you with learning the practical skills required, whilst your training provider (Aspiration Training) will teach you the theory side. Your study will be based online with regular teaching and 1-2-1 sessions. Off-the-job training will be given throughout your apprenticeship during paid working hours.Training:The apprenticeship provides employment and training within a dental practice to study the Level 3 dental nurse apprenticeship. The apprenticeship is designed to teach the knowledge, skills and behaviours necessary to ensure competency in all aspects of clinical duties including: -
Preparing for Professional Practice in Dental Nursing
Infection Prevention and Control
First Aid and Medical Emergencies
Oral and General Health
Endodontic Treatments
Prosthetic Treatments
Radiation and Radiography
Periodontal Disease and Cavity Restoration
Health and Safety
Extractions and Minor Oral Surgery
Management of Oral Health Diseases and Dental Anatomy, Oral Health Assessments and Treatment Planning
The use of VR Technology
Upon successful completion, you will awarded the relevant qualification to apply for professional registration as a dental nurse to the General Dental Council (GDC).Training Outcome:This is a great opportunity to be trained and secure long-term employment. Once qualified, there are a number of routes for further training and development, including dental hygienist, dental therapist or dental cosmetics. Also, the opportunity for career progression into head nurse, team leader, or practice manager.Employer Description:At Rodericks Dental Partners we are committed to improving lives through quality dentistry – together. We do this by ensuring we reward you financially and personally as you develop your career by offering you great incentives, recognition, and opportunities.
Permanent “learn while you earn” role – the first step to starting a rewarding career in Dental Nursing
Learning support from a regional Trainee
Retail discounts and deals through our easy-to-use app
Extra day of annual leave for your Birthday!
Annual leave package which increases with your length of service
Uniform provided
Refer a friend schemeWorking Hours :Monday to Saturday between hours 8am - 8pm.Skills: Communication skills,Customer care skills,Team working,Initiative,Patience....Read more...
JOB DESCRIPTION
Job Title: NEW PRODUCT DESIGN ENGINEER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the "thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 5 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
Are you an experienced Project Manager with a passion for delivering innovative software solutions? Join a dynamic team where you can lead impactful projects, earning up to £59k + benefits, with the flexibility of being Cambridge-based or working remotely with necessary travel.About the CompanyWe are a fast growing and successful GovTech company. We are dynamic and forward thinking, with great ambition. You will have the chance to share your knowledge and make your presence felt. With our people at the core of everything we do, we don’t want people to ‘fit in’, diversity and difference are essential to creativity. We want people to thrive in our open and collaborative environment and be an integral part of our close knit team.So, if you are looking for something more than ‘just a job’, you are in the right place. We have big company benefits, including Private Medical Insurance, Life Assurance and Pension, as well as Volunteering Days, Health & Wellbeing benefits and social activities.If this all appeals and you have the ambition to match ours, then read on!The Job RoleOur project managers are responsible for end to end delivery to time, cost and quality of our software solutions to the customer. The environment is fast paced and agile as we work to deliver services to the UK public sector.As a successful PM already, you will love the idea of working closely with clients and stakeholders to ensure the best possible outcome, keeping a multidisciplinary team aligned towards a common goal. You will have the authority in leading significant business change and enhanced ways of working in public and government officer facing services. Working closely with your wider company, in particular account managers and service teams, you will strive for great customer experience and uncover new opportunities to deliver cloud based SaaS projects and clear business benefits for our customers.Is this You?Responsibilities:
Lead multiple projects or a programme of work for one or more clients, primarily within the local government sectorManage a virtual project team and work collaboratively with other Project Managers, Product Managers, Data Specialists, Application Consultants, Technical Consultants and development teams to ensure products are delivered to client’s specifications on time and on budgetTake a collaborative approach to sharing learning with an aim to enable continuous improvement of project management across the businessPlan and control finances by means of accurate estimation, forecast to complete and strong monitoring and control of spend. Agree costs and sign off invoices in line with the agreed budgetLiaise proactively with clients on the progress of jobs and act as the first point of contact for customer complaints, responding efficiently to resolve issues as presented, escalating to the Head of Project Delivery as appropriateMaintain ongoing communications with all stakeholders including attending board meetings at client organisations and working with client business change managers or equivalent on the transition to the new business to align priorities both within the client and supplier organisationsManage the project and programme risks, issues and dependencies and the interfaces between projects as well as third party contributions to the project and programmeProduce monthly project reports in a timely manner for directors and clients, ensuring they are accurate and presented in a professional formatOversee governance arrangements in line with the company’s Business Management System for the delivery of the project, defining clear roles, responsibilities and accountabilities across all stakeholders
Requirements:
Experience of managing software delivery projects and programmes that involve significant business changeExperience of delivering software development projects to external customersProject management experience with strong leadership skills across:
Planning, governance & reportingStakeholder & team managementRAID & Change managementBudget management
Comfortable with Google suite & PM toolsGood commercial acumen with an understanding of delivering client satisfaction whilst maximising business valueSelf-motivated, methodical and conscientiousStrong interpersonal skills with the ability to build positive relationships, instil confidence and influence change and business transformationA lateral thinker with strong analytical and problem-solving skills, including an ability to anticipate and highlight potential issues and opportunities and resources accordinglyWilling to travel very occasionally to customer sites throughout the UKPrevious experience of working with or in a public sector and familiar with the local government procurement processPrevious experience of delivering projects based on the Salesforce platformA background in leading client accounts in a consultancy environment with a track record of successful client management and growthRelevant project management qualification (Agile/Prince2/MSP/APM etc)
How to ApplyIf you think you have the skills and experience, we are looking for, please click on the link provided and you will be redirected to our company's website to complete your application.....Read more...
Full-time; Contract (January 2025 to March 2026)
Date Posted: November 14, 2024
Who we are…
The Pacific National Exhibition is an iconic institution in BC, famous for bringing generations of people together to celebrate and build memories. This 114-year-old, non-profit organization has an annual operating budget of over $70 million dollars and generates revenue through four activity streams: the 15-day annual summer Fair and winter Fair which average more than 700,000 people annually, Playland amusement park which welcomes 400,000 guests annually including Fright Nights, and a busy year-round portfolio of events including concerts, trade shows and film, cultural and community events. In total we bring over 2 million people through the site each year. The fourth activity stream is park care and facility maintenance. The PNE is proud of the work it does at Hastings Park and has a vibrant team that is passionate about events, guest experience and delivering memorable experiences.
At the PNE, we strive to create an environment that reflects our organization's core values: Enthusiasm, Excellence and Evolution. With a focus on these core values, we are committed to achieving our mission which is to "Deliver Memorable Experiences" for all who interact with the PNE whether it is our guests, our employees or the community.
Supporting the Manager, Gaming, the Assistant Manager, Gaming Operations is responsible for leading event operations for the PNE Prize Home Lottery and the PNE Winter Lottery. They will demonstrate effective project planning and processes to manage milestones, timelines, budgets and priorities while working collaboratively with cross-functional teams and external partners.
Candidates must have demonstrated project or event management as well as exceptional interpersonal, communication and leadership skills. Due to the operational nature of our events and programs, the candidate must be comfortable with a fluctuating schedule and a work environment that changes from very hands-on to one of planning and leadership. Our ideal candidate will have 2-4 years of event management experience, preferably within the area of revenue-focused operations.
Why join our Team?
Exhilarating and fun-loving culture
Flexible work environment
Opportunity for free or discounted tickets to shows, events, sports games, and much more
Staff discounts for Playland, The Fair, and Fright Nights, as well as all PNE Food Stands
Competitive compensation package
Opportunity to create lasting memories and friendships!
What will you do this year?
In your role as an Assistant Manager, Gaming Operations, your primary accountabilities will be to:
Oversee planning and project management of the PNE Prize Home build
Support Manager, Gaming with year-round Prize Home project planning.
Develop and manage department operating budgets as well as hold accountability for monitoring control of expenses within approved budgets.
Oversee the house design and construction build process for the PNE Prize Home including managing contractor timelines, establishing and maintaining processes for managing the scope of the project as well as assessing and reporting risks.
Assist with the award and handover of the PNE Prize Home to the winner.
Develop and actively manage positive relationships with external vendors, suppliers and contractors.
Collaborate cross functional teams such as the Marketing department to develop and execute the annual sales campaign with a focus on hitting budgeted revenue targets and driving initiatives to boost sales.
Oversee the assembly of necessary material and preparation of reports needed to comply with the Gaming Policy and Enforcement Branch (GPEB) requirements.
Oversee planning and event operations of the Prize Home Mall Tour program:
Develop and manage a sales and brand focused mall tour program for both the summer and winter lotteries within the Metro-Vancouver region.
Develop and manage department operating budgets as well as hold responsibility for driving mall tour revenue.
Maintain timely and accurate ticket reconciliation process.
Develop an effective schedule of display dates at Metro-Vancouver locations and coordinate with malls to procure display space.
Oversee event logistics for move in, operation and tear down of even mall events.
Organize branding, towing, and display of prize vehicles.
Hire, train, motivate, schedule and supervise roughly 10 mall vendors with a sales focus as well as oversee administrative needs of the mall vendor team (completing necessary paperwork for hiring, payroll, uniforms, IDs etc.).
Ensure all orders are taken and processed in an accurate and compliant manner.
Oversee event operations of the Prize Home open house dates and onsite display:
Coordinate and schedule affiliated media and sponsored events at the offsite Prize Home location.
Supervise the Gaming Events coordinator and roughly 30 union employees both for weekend offsite open house dates and onsite Fair display.
Support in the planning and set up of the Fair PNE Prize Home Display onsite during the Summer Fair.
Schedule, supervise and evaluate performance of the Prize Home hosts.
Complete necessary paperwork for hiring, payroll, uniforms, IDs etc.
In addition to your primary responsibilities, as the Assistant Manager of Gaming Operations, you will support the Gaming department team where need, including:
Manage Gaming daily operations and planning in collaboration with cross functional departments as well as external partners and suppliers
Support the operational aspects of all Gaming Fair programs (including Onsite Lottery Sales, Wheel of Fortune, Prize Home) - includes set-up, employee management, operations, security measures in place
Prepare and present department plans and reporting
Ensure compliance with government gaming regulations
What else?
Graduated from a post-secondary program, OR an equivalent combination of education and experience.
Must be 19 years or older and registerable with the BC Gaming Policy & Enforcement Branch.
Must have at least 2-3 years of management/supervisory experience in Operations, Sales and/or Customer Service in the Entertainment, Sales, or Hospitality industry.
Must have previous administrative experience working with financials, budgets, sales targets with ability to accurately handle and reconcile large volumes of cash/tickets.
Must have a strong knowledge of computer applications including Microsoft Office, cloud-based applications, and databases.
Knowledge of and experience working in the Gaming industry and/or a call center is considered an asset.
Must be able to work an event-based work schedule which includes weekends, late nights, extended hours, and extended workweeks.
Proven ability to work in matrixed or cross-functional organizations building strong relationships with the public, industry partners, and business stakeholders to deliver events and services.
Knowledge of the planning, production, and management of events within the entertainment industry.
Ability to create planning documents and tools to efficiently execute events.
Must possess good decision-making skills with the ability to react well to high-pressure situations and tight timelines.
Must have strong time management, organizational, and communication/interpersonal skills with an excellent leadership ability.
Required to have a valid 5th class BC Driver's license and the ability to provide a clear and up-to-date Driver's Abstract as regular work locations are throughout the Metro-Vancouver region.
Successful candidates must undergo a Criminal Record Check.
Who are you?
Organized
Methodical
Proactive
Skillful communicator
Cr
....Read more...
This role includes responsibility for maintaining operating procedures and standards in line with College Policies. As well as supporting opportunities in collaboration with the curriculum team in supporting the Head Chef and senior kitchen team in training and assessment of students on Hospitality and Catering courses.
A significant part of activity will be day-to-day management and maintenance of daily operational duties as stipulated by the Head Chef in the kitchen including food safety and health and safety, kitchen hygiene, receiving deliveries and goods storage in compliance with FAS guidelines.
KEY RESPONSIBILITIES OF THE JOB HOLDER:
The person appointed will be required to work flexibly within a team environment and will be allocated a range of duties and responsibilities. The post holders will work closely with Head Chef and senior kitchen staff and will be allocated a range of duties. The duties allocated may be varied or changed by the line manager dependent on the needs of the service.
Health and Safety:
1.Keep up to date with HACCP documents, ensuring they are filled out daily
2. Ensure stations are kept clean and organised
3. Keep on top of dishes in pot-wash during service, keeping chemicals topped up
4.Follow organisations cleaning procedures, reporting any faults to supervisor
5.Ensure food is stored correctly – following F.I.F.O storage system
6.Monitor kitchen equipment – reporting any faults to supervisor
7. Ensure safe storing of equipment – knives, blades etc, kept track of
Food:
1.Perform stock checks, informing supervisors of depleting stock
2.Receive deliveries, checking use-by dates, packaging quality, etc.
3.Prepare (wash, cut, cook) vegetables, fruits and meats to specifications
4.Weigh / measure ingredients accurately
5.Assemble / cook dishes on the menu with consistent quality
6.Label food items for storage within organisations policy.
7.Accurate portion control for menu items
8.Manage wastage – report concerns to supervisor
Teamwork:
1.Work within the team to successfully produce dishes within a strict time-limit
2.Support different sections, aiding in prep / ticket production where needed
3.Clear communications with F.O.H regarding order status, stocks, outstanding tasks etc.
4.Receive supplies (upon delivery and digitally) regarding purchases, deliveries etc.Training:Level 2 Commis chef apprenticeship standard, including Functional Skills in English and maths if required.Training Outcome:Further progression may well be available in other areas within our sector, upon successful completion of your apprenticeship.Employer Description:Welcome to London South East Colleges, where your journey to career success begins.
With seven campuses across Bromley, Bexley, Greenwich and Lambeth, we believe in the power of community.
We operate as a social enterprise, supporting social mobility and ensuring everyone can reach their career goals. Our ambition is to transform lives through the power of learning.
Our fantastic facilities, expert tutors, and thriving student community make our college a great place to study and reach your full potential.
Our courses are designed with your future career in mind, providing practical skills and real-world experiences that employers value. We work closely with local and national businesses to ensure our curriculum stays relevant and fully prepares our learners.
If you want to get on course and become part of a supportive, thriving community dedicated to helping you succeed, apply now!
We can’t wait to hear from you.Working Hours :Monday to Friday - 7:30am - 3:30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Building Sciences team will participate in different projects with various scopes of work. The Field Engineer is responsible for the organization, research, and documentation of cross-departmental assignments supporting the continued growth and operations of Pure Air Control Services, a Weatherproofing Technologies, Inc. division.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports the Building Sciences Project Manager with test and balance research, consultation, operations policy generation, and quality issues. Adjust systems controls to settings recommended by the vendor, conduct measurement tests, and discuss system malfunctions with system users to isolate the problems. Read and interpret blueprints, technical drawings, schematics, and computer-generated reports. Coordinate with multi-disciplined teams, including sales personnel and field team, to develop a scope of work and estimate the cost of a project. Organize material and complete reports according to pre-defined standards regarding order, clarity, conciseness, style, and terminology. Evaluate current processes and develop innovative approaches for improvement. Write and develop in-house training materials supporting the staff and franchise partners. Contacts and communicates directly with all levels of company management, staff members, and clients.
CERTIFICATES, LICENSES, REGISTRATIONS: Industry certificates are preferred but not required. Ability to obtain Engineer Intern certification preferred but not required. Bachelor's Degree in an Engineering field (preferred) 3+ years of experience in the HVAC industry, including Test and Balance or Bachelor's degree in an Engineering field.
OTHER SKILLS AND ABILITIES:
Working knowledge of Heating, Ventilation, and Air Conditioning systems. Familiarity with current building, energy, and mechanical codes and standards. Understanding of Indoor Air Quality and how it affects the building occupants. Understanding of HVAC design principles, including heating load, air change, and ventilation requirements, and applying different HVAC systems (Constant volume, VAV, 100% OA, ERV units, etc.). Understanding of HVAC engineering fundamentals, including load calculations, conceptual systems analysis through construction documentation design, equipment design and layout, and duct and pipe sizing. Customer service oriented. Proficient computer skills and strong technical writing skills. Proficient in Microsoft Office Suite (Word, Excel, and Outlook). Well organized and possess superior time management abilities to support several projects simultaneously. Self-motivated and self-directed while remaining a team player. Ability to travel out of state up to 50% of the time. The salary range for applicants in this position generally ranges between $58,000 and $75,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
During the Dental Nurse Apprenticeship, you will receive ongoing support, development and training to equip you with the skills and knowledge required to qualify and have a successful career in dental nursing.
Your daily activities could include:
Assisting the dentist in providing safe and effective treatments to patients, from simple check-ups to advanced specialist treatments
Providing patients with a high level of care
Setting up and cleaning surgery
Sterilising instruments
Updating patient records
Maintaining equipment
Preparing instruments and materials for various treatments
Adhering to practice policies and procedures
The use of VR Technology
During your working day, the dental practice will support you with learning the practical skills required, whilst your training provider (Aspiration Training) will teach you the theory side. Your study will be based online with regular teaching and 1-2-1 sessions. Off-the-job training will be given throughout your apprenticeship during paid working hours.Training:The apprenticeship provides employment and training within a dental practice to study the Level 3 dental nurse apprenticeship. The apprenticeship is designed to teach the knowledge, skills and behaviours necessary to ensure competency in all aspects of clinical duties including: -
Preparing for Professional Practice in Dental Nursing
Infection Prevention and Control
First Aid and Medical Emergencies
Oral and General Health
Endodontic Treatments
Prosthetic Treatments
Radiation and Radiography
Periodontal Disease and Cavity Restoration
Health and Safety
Extractions and Minor Oral SurgeryManagement of Oral Health Diseases and Dental Anatomy, Oral Health Assessments and Treatment Planning
The use of VR Technology
Upon successful completion, you will awarded the relevant qualification to apply for professional registration as a dental nurse to the General Dental Council (GDC).Training Outcome:This is a great opportunity to be trained and secure long-term employment. Once qualified, there are a number of routes for further training and development, including dental hygienist, dental therapist or dental cosmetics. Also, the opportunity for career progression into head nurse, team leader, or practice manager.Employer Description:At Rodericks Dental Partners we are committed to improving lives through quality dentistry – together. We do this by ensuring we reward you financially and personally as you develop your career by offering you great incentives, recognition, and opportunities.
Permanent “learn while you earn” role – the first step to starting a rewarding career in Dental Nursing
Learning support from a regional Trainer
Retail discounts and deals through our easy-to-use app
Extra day of annual leave for your Birthday!
Annual leave package which increases with your length of service
Uniform provided
Refer a friend scheme
Working and Training as Dental Nurse…
A dental nurse works side by side to the Dentist assisting them in a variety of NHS and Private dental procedures, ultimately making sure the patient care and experience is at its best.
As an Apprentice Dental Nurse you will work in a supportive environment; we are passionate about building great teams who trust each other, work professionally, and take ownership for the success for the practice.Working Hours :Monday to Friday Hours to be determined.Skills: Communication skills,Attention to detail,Customer care skills,Initiative,Patience....Read more...
As a Chef apprentice, your passion for all things food and the desire to make the perfect dish every time is what sets you apart. With a keen eye for maintaining the highest standards and thriving during a fast past service, you’ll soon become an invaluable member of the kitchen team.
Join us at Pub & Dining, a collection of outstanding pubs and inns amidst beautiful British surroundings, achieving the perfect balance between traditional character, charm, and authenticity. These qualities give Pub & Dining a timeless appeal that makes us a firm favourite for celebrating the moments that make life special.
We’re all about rewarding our teams hard work, that’s why…
You’ll receive a competitive salary, pension contribution as well as:
The chance to further your career across our well-known brands – As one of the industry's top apprenticeship providers, we can provide training and development at each level of your career.
Discount of 33% for you and 15% for your loved ones on all of our brands – so you enjoy your favourite food and drink at a discount.
Wage Stream – Access your wage before payday for when life happens.
Retail discounts – Receive up to 30% off at Superdrug, exclusive discounts with three mobile along with many more…
Discount of 50% for you and 25% for your loved ones at our Greene King Inns and hotels. – so you can enjoy a weekend away without breaking the bank.
Free employee assistance program – Mental Health, well-being, Financial, and Legal support because you matter!
As a Chef apprentice, you will…
Prepare, cook and present food which meets specs and customer expectations.
Maintain hygiene levels and safety regulations in the kitchen to help to guarantee the safety of your entire team and visitors.
Communicate clearly with your team in order to provide high-quality meals to customers on time.
Keep up to date with new products, menus and promotions.
What your apprenticeship includes
A mixture of face to face and skype/phone catch ups every 4 - 6 weeks to discuss feedback and progress.
A mixture of on and off the job training, including workshops and webinars.
Reviews every 12 weeks with your Line Manager and apprenticeship Trainer.
The chance to get Functional Skills in English and maths (if you don’t already have GCSE or equivalents).
A Chef Apprenticeship Qualification once you have completed the 15 month programme.
Attend 4 masterclasses to further develop your Chef skills.
Training Outcome:Ongoing training and development within the business.Employer Description:Greene King is the country’s leading pub retailer and brewer, running over 3,100 pubs, restaurants and hotels in towns, villages and city-centre high streets across England, Wales and Scotland. With a rich heritage of over 200 years, we brew award-winning beers and operate managed, tenanted, leased and franchised pubs from our headquarters in Bury St. Edmunds.Working Hours :20-25 hours. Shift work including bank holidays, evenings and weekends. Exact days and shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Team working....Read more...
As a Chef apprentice, your passion for all things food and the desire to make the perfect dish every time is what sets you apart. With a keen eye for maintaining the highest standards and thriving during a fast past service, you'll soon become an invaluable member of the kitchen team.
Join us at Chef & Brewer, a collection of unique country-style pubs set in beautiful locations across the country which are welcome escapes for our customers, that feel like a home away from home. Our relaxed pubs with beautifully decorated interiors, seriously good pub food and expertly chosen drinks ranges are the perfect places for our customers to enjoy any occasion.
We're all about rewarding our teams hard work, that's why...
You'll receive a competitive salary, pension contribution as well as:
The chance to further your career across our well-known brands - As one of the industry's top apprenticeship providers, we can provide training and development at each level of your career.
Discount of 33% for you and 15% for your loved ones on all of our brands - so you enjoy your favourite food and drink at a discount.
Wage Stream - Access your wage before payday for when life happens.
Retail discounts - Receive up to 30% off at Superdrug, exclusive discounts with three mobile along with many more...
Discount of 50% for you and 25% for your loved ones at our Greene King Inns and hotels. - so you can enjoy a weekend away without breaking the bank.
Free employee assistance program - Mental Health, well-being, Financial, and Legal support because you matter!
As a Chef apprentice, you will...
Prepare, cook and present food which meets specs and customer expectations.
Maintain hygiene levels and safety regulations in the kitchen to help to guarantee the safety of your entire team and visitors.
Communicate clearly with your team in order to provide high-quality meals to customers on time.
Keep up to date with new products, menus and promotions.
What your apprenticeship includes
A mixture of face to face and skype/phone catch ups every 4 - 6 weeks to discuss feedback and progress.
A mixture of on and off the job training, including workshops and webinars.
Reviews every 12 weeks with your Line Manager and apprenticeship Trainer.
The chance to get Functional Skills in English and maths (if you don't already have GCSE or equivalent).
A Chef Apprenticeship Qualification once you have completed the 15 month programme.
Attend 4 masterclasses to further develop your Chef skills.
Training:Chef Academy Production Chef L2 including Functional Skills in Maths and English.Training Outcome:Ongoing training and development within the business.Employer Description:Greene King is the country's leading pub retailer and brewer, running over 3,100 pubs, restaurants and hotels in towns, villages and city-centre high streets across England, Wales and Scotland. With a rich heritage of over 200 years, we brew award-winning beers and operate managed, tenanted, leased and franchised pubs from our headquarters in Bury St. Edmunds.Working Hours :Shift work including bank holidays, evenings and weekends. Exact days and shifts to be confirmed.Skills: Team Working,Organisation Skills....Read more...
