AA Euro Group are currently seeking an experienced MEP Design Engineer on behalf of a leading electrical contractor based in London. This is a full-time permanent position where you will be required to split your time between the office (East London) and site (Canary Wharf).Job PurposeThe MEP Building Services Design Assistant will support the design and delivery of mechanical and electrical building services projects from initial concept through to construction. The role will work closely with the Design Team, Project Managers, Quantity Surveyors, site teams and external consultants to produce accurate, coordinated and practical MEP design information.The successful candidate will assist with drawings, calculations, specifications, design coordination and document control while developing their technical knowledge across mechanical and electrical building services.Key Responsibilities:Design & Technical Support
Assist with the preparation and development of MEP building services designs.Produce and amend mechanical and electrical services drawings using relevant CAD/BIM software.Assist with layouts for HVAC, ventilation, heating, plumbing, drainage, electrical containment, lighting, power and other building services.Assist with design calculations, equipment selections and technical schedules under appropriate supervision.Review drawings and technical information to identify potential clashes, discrepancies or design issues.Assist with the preparation of design specifications, schedules and technical documentation.Ensure drawings and design information are produced accurately and in accordance with project requirements.
BIM & CAD
Assist with the production and maintenance of 2D and 3D MEP models and drawings.Support BIM coordination and clash detection processes.Update drawings and models following design changes, site information and coordination meetings.Maintain drawing standards, revisions, naming conventions and file structuresWork with the wider Design Team to ensure mechanical and electrical services are properly coordinated.
Project & Design Coordination
Attend design, coordination and project meetings where required.Liaise with Project Managers, QSs, site teams, subcontractors, suppliers and consultants.Assist with responding to technical queries and requests for information.Review information received from clients, consultants and subcontractors.Assist with incorporating site survey information into design documentation.Support the Design Team in resolving technical issues during construction.
Documentation & Quality
Maintain accurate design records and document registers.Ensure drawings and technical documents are issued correctly and within agreed timescales.Follow company design procedures, quality requirements and document control processes.Assist with checking designs and drawings before issue.Maintain confidentiality of company, client and project information.Ensure all work complies with relevant legislation, British Standards, Building Regulations and project specifications.
Site Support
Undertake occasional site visits to assist with surveys, inspections and designcoordination.Record site conditions and provide accurate information to the Design Team.Assist with resolving design issues identified during construction.Liaise with site personnel to understand practical installation requirements andconstraints.
Skills & Competencies
Some experience or education within MEP, building services, mechanical engineering, electrical engineering, construction or a related discipline.Ability to read and understand technical drawings.Good understanding of basic building services principles.Good IT skills, including Microsoft Office.Strong attention to detail and accuracy.Good organisational and time-management skills.Ability to work effectively as part of a multidisciplinary team.Willingness to learn and develop technically.Good written and verbal communication skills.
Working Conditions
Office-basedFull-time, Monday to Thursday 8am -5pm Friday 8am – 4:30pmMay involve working to tight deadlines during project handover or tender periods.The duties outlined above are not exhaustive. The post holder may be required to undertakeadditional reasonable duties consistent with the level and purpose of the role.
INDUK....Read more...
Senior Mechanical Design Engineer |Bournemouth
Location: Bournemouth, Dorset
Salary: Competitive + Excellent Benefits
Are you an experienced Mechanical Design Engineer looking to work on innovative mechanical and electromechanical products used across industries including healthcare, mobility, transport, leisure and industrial automation? Are you looking to take the next step in your career?
An established UK engineering and manufacturing business is looking to recruit a talented Senior Mechanical Design Engineer to join its Product Development team. This is an exciting opportunity to take ownership of new product development projects from concept through to production, while working with a collaborative team in a technically advanced manufacturing environment.
The Role as Mechanical Design Engineer based in Bournemouth
Reporting to the Head of Innovation, you will play a key role in designing and developing new products, improving existing designs, supporting new product introduction (NPI) and ensuring products meet customer requirements, engineering standards and manufacturing objectives.
You will also act as the technical lead for key customer projects, collaborating with cross-functional teams to deliver innovative engineering solutions.
Key Responsibilities for the Senior Mechanical Design job in Bournemouth
Lead the technical development of new customer and product roadmap projects.
Design and develop mechanical and electromechanical products from concept through to production.
Create 3D CAD models, engineering drawings and technical documentation using SolidWorks.
Produce supporting engineering documentation including product specifications, validation plans and compliance documentation.
Optimise existing products to improve performance, reliability, manufacturability and cost.
Conduct engineering calculations and simulations to validate designs.
Work closely with Manufacturing, Production Engineering, Quality, Purchasing, Testing and Project Management teams during product development.
Raise and manage Engineering Change Requests (ECRs).
Support prototype builds, testing and production handover.
Review concessions and first-off approvals.
Ensure designs comply with relevant engineering standards and regulatory requirements.
Mentor and support less experienced engineers where appropriate.
About You
Essential Skills & Experience
Degree qualified in Mechanical Engineering, Electromechanical Engineering or equivalent industry experience.
Proven experience in mechanical product design and development.
Strong SolidWorks CAD experience.
Experience of manufacturing processes including castings, machined components and moulded parts.
Knowledge of Design for Manufacture (DFM) and Design for Assembly (DFA).
Experience with APQP, PPAP and Design & Process FMEA.
Understanding of manufacturing ERP systems such as SAP, IFS, Priority or similar.
Excellent problem-solving and analytical skills.
Strong project management and organisational abilities.
Ability to manage multiple engineering projects simultaneously.
Excellent communication skills with the ability to work across multidisciplinary teams.
Desirable Skills
Knowledge of electric motors, gearboxes, drivetrains or rotating machinery.
PCB design experience.
Understanding of CE, UKCA, UL, EMC and IP approvals.
SolidWorks EPDM experience.
Knowledge of KissSoft Gear Design software.
Experience with MotorSolve software.
Lean Manufacturing and Continuous Improvement experience.
Why Apply?
This is an excellent opportunity to join an innovative engineering manufacturer that designs and develops high-quality products supplied to customers around the world.
You'll benefit from:
Working on technically challenging engineering projects
Ownership of projects from concept through to production
Modern engineering and manufacturing facilities
Career development and progression opportunities
Collaborative and supportive engineering culture
Competitive salary and comprehensive benefits package
Apply Today
If you are an experienced Mechanical design Engineer, looking for a step into a Senior position, in Bournemouth, we'd love to hear from you. Please send you cv over to nking@redlinegroup.Com or call 01582878839 for more information.....Read more...
An excellent opportunity for a Manufacturing Engineer to help commission a brand-new production line and shape its long-term performance within a large, well-established PLC manufacturing business.
This role may suit a Manufacturing Engineer, Process Engineer, Production Engineer, Project Engineer, Commissioning Engineer, or Reliability Engineer.
What’s in it for you as Manufacturing Engineer
£60,000 base salary
Company bonus
12% company pension contribution
35 days’ holiday
Healthcare
Excellent career-development opportunities
Key responsibilities of Manufacturing Engineer:
Support the installation, commissioning and optimisation of a new production line.
Improve manufacturing processes, OEE, reliability, throughput, quality and waste.
Analyse performance data and lead root-cause investigations.
Deliver CAPEX and improvement projects from specification through to handover.
Support tooling development, manufacturing trials, NPD and NPI.
Work closely with operational teams, contractors, OEMs and specialist integrators.
Produce engineering drawings, specifications and operating procedures.
We’re looking for a Manufacturing Engineer who can demonstrate the following:
Experience in a manufacturing, process, production, project or commissioning engineering role.
Hands-on experience introducing or commissioning manufacturing equipment.
Strong fault-finding, problem-solving and continuous-improvement skills.
Evidence of improving OEE, reliability, quality, throughput or waste.
A relevant apprenticeship, HNC, HND, degree or equivalent engineering background.
Experience of CAD, tooling, Lean Manufacturing, automation, process validation or reliability-centred maintenance would be advantageous.
Apply now for a confidential discussion about this high-impact engineering opportunity.....Read more...
How to interpret and produce engineering drawings and CAD models using industry‑standard software
How to understand materials, tolerances, manufacturing processes and how design decisions affect production
How to support the estimating and design teams with technical data, drawings, and documentation
How to work with engineering change processes, revision control and technical specifications
Quality control principles, inspection techniques and how to design for quality and manufacturability
How to communicate technical information clearly to colleagues in design, production and sales
Recognised engineering and manufacturing standards including 5S, safe working practices and continuous improvement
How to contribute to problem‑solving activities and support engineering projects from concept to manufacture
Training:
Engineering Operative Level 2
Training will take place at Printworks Campus, Leeds
You will attend college one day per week
Training Outcome:Progression onto level 3 apprenticeship.Employer Description:Barkston is a British specialist plastic company leading the way in plastic manufacturing thanks to a combination of experienced engineers, specialist equipment and focus on timely quality.
Our specialist plastic company comprises manufacturing teams led by committed engineers with at least 25 years’ experience. Working with them are subsequent generations of plastic specialists, trained engineers and our next generation of specialists; our apprentices.Working Hours :Monday - Thursday, 8.00am - 4.00pm and Friday, 8.00am - 2.00pm (one day per week at college)Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Operating 5 axis CNC routing machines
Setting CNC machines for production
Loading and selecting CNC programs
Setting and changing cutting tools
Setting fixtures and accurately positioning components
Trimming and machining vacuum formed plastic components
Understanding engineering drawings and dimensions
Using measuring equipment to check finished components
Carrying out first off and production quality checks
Identifying and reporting machining or quality issues
Understanding different plastic materials and how they machine
Basic CNC machine maintenance and daily checks
Safe working practices around CNC machinery
Working with our CAD/CAM and production teams to understand how components progress from design through to manufacture
Training:
Training will take place at Printworks Campus, Leeds.
You will be required to attend college one day per week.
Training Outcome:
Permanent position available following successful completion of the apprenticeship, subject to performance, attendance and timekeeping
Employer Description:Founded in 1967, The Vacform Group brings over 50 years of expertise in vacuum forming and plastics manufacturing.
We specialise in innovative thermoformed plastic products for industries such as automotive, building & construction, aerospace and medical, delivering high-quality, cutting-edge solutionWorking Hours :Monday to Friday
8:30am- 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Junior Design Engineer
Brighton
£27,000 - £30,000 + Industry Training + Career Progression + Company Benefits + Immediate Start
Looking to kick-start your career as a Junior Design Engineer with a specialist company where you'll receive excellent training, develop valuable technical skills, and become an expert within a niche area of the construction industry? This is a fantastic opportunity to join a growing business that is known for its high-quality projects and long-term investment in its people, offering genuine progression as your experience grows.
As a Junior Design Engineer, you'll work alongside experienced engineers using AutoCAD to produce technical drawings while supporting projects from concept through to completion. With plenty of variety in the role, you'll work closely with customers, project teams, and internal departments, gaining hands-on experience and building a specialist skill set within a unique area of the construction industry.
Your Role As A Junior Design Engineer Will Include:
* Producing technical drawings and layouts using AutoCAD.* Assisting with the design and development of specialist construction projects.* Liaising with customers, contractors, and internal teams.* Supporting projects from initial design through to completion.* Ensuring designs meet customer requirements and industry standards.* Updating drawings and technical documentation.* Working closely with senior engineers while developing your technical expertise.
As A Junior Design Engineer You Will Have:
* Experience using AutoCAD.* A qualification or background in Engineering, Design, Construction, or a related discipline.* Strong attention to detail and problem-solving skills.* Good communication skills and the ability to work collaboratively.A willingness to learn, develop, and build a long-term career within a specialist engineering business.
Keywords: Junior Design Engineer, CAD, Sustainability, Design, Drawings, Brighton, Crawley, East Grinstead....Read more...
Work with CAD software
Electrical and mechanical aspects of incubation and hatchery manufacturing
3D design and 2D drawing
Using SolidWorks
Training:The apprenticeship training is delivered through a combination of workplace learning and regular college attendance. This training will teach you the knowledge, skills and behaviours set out in the Level 3 Engineering Technician: Product Design Apprenticeship. On completion the apprentice will receive a BTEC Level 2 Diploma in Advanced Manufacturing Engineering, Level 3 Diploma in Advanced Manufacturing Engineering and Level 3 Diploma in Advanced Manufacturing Engineering – Product Design and Development Technician qualifications. Training Outcome:Having gained an understanding of the business from the ground up, the successful applicant would have the opportunity to develop their skills within the electrical engineering team or could have to opportunity of joining the field engineers who work on sites within the UK and around the world.Employer Description:EmTech Hatchery Systems, based in Somerset, UK, is a highly experienced team that designs and manufactures advanced industrial incubation and ventilation systems for the poultry industry. Founded on a wealth of knowledge and experience, we understand that temperature uniformity is critical for incubation excellence, that’s why ‘zero-point-six’ isn’t just our slogan but our operational premise. The world is paying attention as we continue to deliver and exceed the high-performance expectations of our industry. Our team of experts are well qualified to help with all new projects, and to vastly improve the results at existing sites. Working Hours :Monday to Friday 8 am to 4.30 pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Logical,Initiative,Good attendance,Good time keeping,Positive attitude....Read more...
This paid apprenticeship offers a dynamic environment to learn essential technical competencies while contributing to the safety, efficiency, and sustainability of building operations. You will gain hands-on experience working with cutting-edge tools and software, preparing you for a successful career in building services engineering and systems management.
Duties:
Use AutoCAD and Revit to create detailed schematics and system layouts for building projects
Support system design processes by applying principles of systems engineering and analyzing schematics to troubleshoot issues effectively
Participate in fabrication and assembly tasks utilising CAD software and fabrication techniques to develop prototypes or repair parts
Support product development initiatives by applying mechanical knowledge, math skills, and technical documentation to improve existing systems or develop new solutions.
Qualifications Needed:
You will be expected to have at least 5 GCSEs at Grade 4 or above, including English, Maths and Science, and Maths at Grade 5 or above (or their equivalent).
This paid apprenticeship is designed for motivated individuals eager to build a solid foundation in building services technology while working alongside experienced professionals. Join us to develop your technical expertise in a vibrant setting that values innovation, safety, and continuous learning!Training Outcome:Once the Level 3 has been completed, the opportunity to proceed to Level 4. Employer Description:Buxton & McNulty Mechanical Services Ltd., became incorporated in April 2005 and was formed to provide Mechanical Services. We specialise in pipework installations covering public health, heating, chilled water, condensate. We offer onsite welding and have a prefabrication shop where pipe can be made to measure and delivered to site.Working Hours :Monday - Friday 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Process Engineering Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools. You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies. This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs. manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online!....Read more...
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Process Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools. You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies. This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs. manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online!....Read more...
An exciting opportunity has arisen for a Principal Mechanical Design Engineer to join one of the leading companies in RF and sensing technology, based in Essex.
Part of a globally recognised organisation, this company is driving innovation across the medical, aerospace, and defence industries. Their expertise has contributed to world-class projects such as the Hubble Space Telescope, cancer radiotherapy systems, and advanced driver-assistance technologies in luxury vehicles.
They are seeking a Principal Mechanical Design Engineer to join their Essex based R&D division, supporting the design and development of cutting-edge new products. This role is ideal for an engineer with several years of experience who enjoys hands-on design work, solving complex challenges, and collaborating within a multidisciplinary team.
Key Responsibilities
Support the mechanical design and development of products from concept through to manufacture.
Produce and maintain technical documentation, including drawings, models, and reports.
Participate in design reviews and assist in resolving engineering challenges alongside senior engineers.
Work closely with process, project, and manufacturing engineers to ensure designs meet performance, cost, and reliability targets.
Contribute ideas for process improvement and new product development.
Desirable Experience
Degree-qualified in Mechanical Engineering or a related discipline.
Proficiency in 3D CAD (e.G. SolidWorks, Creo, or similar).
Understanding of materials selection, mechanical systems, and manufacturing processes.
Experience with FEA or tolerance analysis is advantageous.
Strong problem-solving and teamwork skills.
Keen to learn, develop, and take ownership of your projects.
Due to the nature of the work, our client is unable to offer sponsorship — UK working rights are required.
This is an excellent opportunity for an Essex based Principal Mechanical Design Engineer looking to take the next step in their career working on advanced technology and contributing to high-impact, real-world applications.
Apply Now: Please send your CV to rwilcocks@redlinegroup.Com or contact Ricky Wilcocks on 01582 878810 for more information.....Read more...
FLEXIBLE WORKING HOURS + 35 HOLIDAYS + REGULAR OVERTIME + HIGH ENG & MODERN MACHINES + COMPLEX MANUFACTURINGDue to continued demand of their services, this employer is actively searching for a Production Engineer to join their skilled engineering team on a permanent basis.As this ROCHDALE based employer is just minutes from the M62, the successful Production Engineer will easily be able to commute from surrounding towns & cities including Oldham, Bury, Halifax, Middleton, Huddersfield and Manchester.For the Production Engineer position, we are keen to receive applications from individuals who possess:
Formal qualifications within a Mechanical Engineering or Machining focused discipline (Apprenticeship, NVQ/City & Guilds/BTEC Level 3, HNC, HND or similar)
Strong CNC Machining skills and knowledge – ideally an accomplished Machinist who has progressed into an Offline Programming or similar position
The ability to create bespoke CNC programs from scratch using CAD/CAM software (all packages considered – SolidCAM experience is advantageous)
IDEAL NOT ESSENTIAL: Previous experience spent working in a Heavy Engineering environment
Working Hours of the Production Engineer: Day shifts with a 39-hour minimum weekly contract; the successful candidate will be offered flexibility around start & finish times between the below times (latest start time 8.30am):
Monday to Thursday – 06:00 to 18:00
Friday – 06:00 to 15:00
On offer to the successful Production Engineer:
Starting Salary: Up to £45,000.00 / £22.18 per hour
Holiday Entitlement: 35 days including public holidays
Option to work regular midweek and Saturday morning overtime:
150% paid between 39-48 hours worked
200% paid after 48 hours worked
To apply for the Production Engineer position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information....Read more...
Apply appropriate civil engineering principles, techniques, and methods, including mathematical, scientific, and technical know-how, to civil engineering and the construction process
Apply key principles, techniques and methods of data and technical information collection, analysis, and evaluation to support the delivery of civil engineering models, designs, and technical solutions
Operate appropriate software packages for data gathering and analysis, such as Computer Aided Design (CAD) or Building Information Modelling (BIM), to create technical drawings, models and designs using relevant conventions and engineering terminology
Apply statutory health, safety and welfare policies, procedures, and regulations in the civil engineering environment, using risk management processes, procedures, and documentation
Support and contribute to the production or modification of civil engineering technical solutions in accordance with relevant industry standards, regulations, and procedures and codes of practice
Apply environmental policies and sustainable principles in civil engineering projects, recognising the need to reduce carbon use, lower emissions and plan for wider sustainability
Plan, carry out and manage own work in line with quality assurance, recognising the wider implications to customer needs, and within cost and resource limitations
Consider equality, diversity and inclusion in the delivery of civil engineering projects
Training:The successful candidate will work towards a Level 3 Civil Engineering Technician Qualification which will take 18 months plus End Point Assessment (EPA).Training Outcome:Full time role.Employer Description:Enable Futures, award-winning Shared/Flexi Job apprenticeship service will support you through your apprenticeship journey and professional development. We employ our apprentices directly and are listed on the Flexi Job Apprenticeship Register. We work with hosts in Yorkshire and the North East to provide apprentices in the construction and civil engineering industry.Working Hours :Monday to Friday, 08:30 - 17:00.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Team working,Initiative....Read more...
Initially, the apprentice will accompany experienced team members and receive close support. As their knowledge and confidence develop, they will begin managing their own enquiries and projects.
Duties will include:
Attend customers' homes with experienced team members to discuss their ideas, requirements and budget.
Take initial dimensions, photographs and relevant site information.
Develop attractive and practical conservatory, extension and living-space designs.
Produce accurate CAD drawings, specifications and detailed quotations.
Present designs clearly, explain available products and revise proposals following customer feedback.
Follow up enquiries and help customers make informed purchasing decisions without cold calling or hard selling.
Work with the surveying, order-processing and installation teams to convert accepted quotations into orders.
Build knowledge of products, construction, planning considerations, Building Regulations, materials and performance.
Training:
The successful candidate will work towards achieving their Apprenticeship Standard in Apprentice Business Administrator Level 3.
A dedicated work-based trainer will be assigned to the candidate to provide them with support and guidance throughout the course.
This is a predominantly work-based programme with College attendance required once a month. All learning will take place at the candidate's place of employment/College and within their contracted working hours.
Training Outcome:
On successful completion, there is a clear route into a permanent full-time Technical Sales Designer position, with further opportunities to develop within James Oliver Conservatories Ltd.
Employer Description:We are a retail and construction business. We sell furniture and homewares, design and build conservatories and single storey extensions, and fit replacement windows and doorsWorking Hours :37.5 hours across five days, 08:30-17:00, Monday to Saturday. Saturday cover is worked on a rota, with a weekday off when a Saturday is worked.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
Are you ready to elevate your career as an Interior Designer to new heights, where creativity meets opportunity?We are actively looking for Midweight Interior Designers with luxury, hospitality and residential backgrounds to join a dynamic team of a leading Interior Design company in London. You will play a pivotal role in conceptualizing, designing, and delivering high-quality interior design projects for a diverse range of clients.Midweight Interior Designer - Luxury (based in London, Salary: £30k-£35k)Here's what you'll be doing:Participate in all stages of the design process, from initial concept development to project completion.Create compelling interior design concepts and presentations that meet the requirements and expectations of clients.Develop detailed design drawings, mood boards, and material specifications.Conduct site visits and surveys to gather necessary information for design development.Collaborate with architects, contractors, and suppliers to ensure the successful execution of design projects.Keep up-to-date with industry trends, materials, and technologies to continuously enhance design offerings.Here are the skills you'll need:Bachelor's degree in Interior Design or related field.3+ years of experience working as an Interior Designer, preferably within a design agency or firm.Proficiency in CAD software (AutoCAD, SketchUp, etc.) and Adobe Creative Suite.Strong conceptual and design skills with a keen eye for detail.Excellent communication and presentation skills, both verbal and visual.Ability to work collaboratively in a team environment and independently when necessary.Knowledge of building regulations and construction processes.Strong organizational and time management skills with the ability to meet tight deadlines.Here are the benefits of this job:Competitive salary of £30k-£35kCollaborative and dynamic work environment with opportunities for professional growth and development.Work Permissions: You must have the right to work in the United Kingdom. Visa sponsorship is not available at this time.....Read more...
An exciting opportunity has arisen for an Electrical Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities for the Electrical Engineer
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience required by the Electrical Engineer
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience required by the Electrical Engineer
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced electrical engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
An exciting opportunity has arisen for an Electrical Hardware Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced hardware engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
What you'll be doing as part of our machine shop team, you'll learn how to:
Set up and operate both Manual and CNC milling and turning machines
Read and interpret engineering drawings and CAD models
Manufacture precision components to exact specifications
Use professional measuring equipment including Micrometres Vernier callipers CMM inspection equipment
Work safely in a modern engineering environment
Learn about tooling, materials, machine programming and machining techniques
Develop problem-solving and troubleshooting skills
Support Lean Manufacturing, Continuous Improvement and 5S activities
Work alongside engineers, machinists, quality teams and production specialists
Take part in rotations across different departments to understand how the business operates
What we're looking for, we'd love to hear from you if you:
Have a genuine interest in engineering, manufacturing or how things work
Enjoy practical, hands-on activities
Have strong attention to detail
Are reliable, motivated and keen to learn
Can work well as part of a team
Are willing to obtain UK Security Clearance if required
Training:Level 3 Machining Technician Apprenticeship, you'll combine:
Practical workplace learning expert mentoring college study (1-day per week)
By the end of the programme, you'll have the skills and experience needed for a successful career in engineering and advanced manufacturing.Training Outcome:Possible full-time role for the right candidate on completion of apprenticeship.Employer Description:Ultra I&C delivers crypto solutions, mission software and tactical communications built to keep operations moving. Our AI-enabled solutions secure, move and make sense of data across all domains—powering decision speed and giving operators at the edge the clarity to act and the confidence to win. Trusted by defense forces and allies worldwide for decades.Working Hours :72 hours over 2-week period working 9 days in a fortnight. Exact working days and hours TBC.Skills: Numeracy,Attention to Detail,Reliable,Punctual,Teamwork,Communication,Problem-Solving....Read more...
Beechnet Systems Ltd is looking for an enthusiastic Apprentice Electronics Engineer to join their growing team. This is an exciting opportunity to develop practical engineering skills while working on real-world projects alongside industry professionals in a supportive and flexible environment. As an Apprentice Electronics Engineer, you'll gain valuable experience across a range of engineering activities, including:
Hardware prototyping
Cable assembly
PCB (Printed Circuit Board) soldering and rework
Testing electronic hardware
Electronics CAD (Computer Aided Design)
Producing technical and test reports
As your skills develop, you'll also have opportunities to learn firmware and software development, helping you build a broad engineering skillset. We're seeking someone who is:
Interested in electronics and engineering
Willing to learn and develop new skills
A strong problem solver
Able to work independently and as part of a team
Enthusiastic, motivated, and keen to build a career in engineering
Early applications are encouraged as this vacancy is likely to fill quickly
Training:You'll complete your apprenticeship with Milton Keynes College, attending college one day a week and spending four days gaining hands-on experience with Beechnet Systems Ltd. You'll be supported by both your college trainer and a dedicated workplace mentor throughout your apprenticeship. What you'll get:
Dedicated mentoring and support
A friendly and supportive engineering team
Funded training and development opportunities
Experience across a range of electronics projects
Opportunities for progression and further study
Training Outcome:Successful completion of the apprenticeship could lead to: A permanent position as an Electronics Engineer or Electronics Technician and Further development opportunities, including support towards a Level 6 Degree Apprenticeship in a relevant subject.Employer Description:Beechnet Systems Ltd is an engineering design company specialising in electronics, firmware and software solutions. Since 2010, the company has delivered innovative projects for customers ranging from major defence organisations to commercial businesses. Despite its growth, Beechnet maintains a people-first culture centred on flexibility, support and employee development.Working Hours :Monday - Friday (Times to be confirmed).Skills: Communication,Team Work,Problem Solver....Read more...
As an Engineering Apprentice, you will gain hands-on experience working towards an apprenticeship alongside skilled engineers while studying toward a nationally recognised qualification. This is an exciting opportunity to kick-start a rewarding career in engineering with full support and mentoring.
Your first year in the apprenticeship will be undertaken in Harwin’s purpose-built training academy with day release to your nominated training provider. Here you will learn vital hands-on engineering skills as well as spending time rotating through different areas across our engineering and operations teams, working on the different technologies and gaining an array of engineering skills before moving into your placement in years two and three. This apprenticeship is in Electrical Engineering, with roles in Software Automation or Electrical Machine Design.
Learn and apply engineering principles related to mechanical or electrical systems
Read and interpret technical drawings, plans, and specifications
Participate in routine inspections, troubleshooting, and repairs of machinery or infrastructures
Support ongoing engineering projects by preparing reports, documentation, and CAD drawings
Attend college / training provider as required and maintain up-to-date coursework
Comply with all health and safety regulations and company policies
Training:As an Apprentice, you will have the opportunity to study the following through this Apprenticeship:
Engineering Manufacturing Level 4 Apprenticeship Standard
HNC Electronic and Electrical Engineering
The day college day release will be held at South Downs College Campus.Training Outcome:Full career progression.Employer Description:Harwin plc is a Portsmouth based manufacturing company specialising in the innovative design and production of electrical / electronic components. Our products are distributed worldwide through our network of partners in Europe, Asia and the US. We offer a breadth and depth of expertise in such markets as distribution, industrial and instrumentation, medical, military, aerospace, automotive and telecommunications.Working Hours :Monday - Thursday 8.00am - 4.30pm and Friday 8.00am - 3.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
What you will do in the short term:
Learn the basic AutoCAD commands and software functions
Develop product knowledge of the precast concrete products being detailed
Learn how to use the company's design and detailing package within AutoCAD
Understand the design office process from receipt of order through to delivery on site
Progress to producing drawings and layouts under the guidance of a mentor
Attend day-release training to develop knowledge and skills
What you will do in the long term:
Produce detailed drawings and layouts for multiple projects
Manage projects from approval layouts through to manufacture schedules
Work with increasing independence while receiving ongoing support
Become involved in pricing and quotations
Assist in planning workloads and manufacturing priorities
Support production planning activities
Training:Construction Support Technician Level 3.Training Outcome:There are excellent opportunities for progression within FP McCann with a strong focus on continued learning and personal development. Future opportunities include progressing within the Design team using 3D modelling software such as Tekla, or moving into Estimating, Planning, Surveying, Commercial or Contracts roles.Employer Description:FP McCann is the largest manufacturer and supplier of precast concrete solutions in the United Kingdom. Operating from thirteen ISO9001-accredited manufacturing facilities across the UK, FP McCann provides a comprehensive range of high-quality precast concrete solutions. These offerings include products for drainage and water management, tunnels and shafts, rail, power & infrastructure, walling, fencing, agricultural applications, flooring, filter bed systems, bespoke precast solutions, tanks and chambers, dock leveller pit systems, box culverts, building products, and architectural and structural products. The company prides itself on customising solutions to maximise client value, considering site conditions, design specifications, and construction requirements.Working Hours :Monday - Friday 8.30am - 5.00pm with a 1-hour lunch break per day.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative,Highly motivated,Willing to learn,Able to drive,Interest in CAD design....Read more...
An innovative space technology organisation is looking for an experienced Senior Payload Systems Engineer Robotics to join its growing engineering team.
This is an exciting opportunity to work on highly complex robotic systems for next-generation spacecraft, taking technical ownership across design, development, testing, integration and operations.
The Role
As a senior member of the payload engineering team, you will provide technical expertise across robotic capture systems, working closely with multidisciplinary engineering teams and external suppliers.
You will:
- Define and review robotics system requirements and verification strategies.
- Lead technical discussions with robotics suppliers and assess solutions against mission requirements.
- Collaborate with mechanical, thermal, electrical, software and systems engineering teams.
- Support robotics hardware through spacecraft design, integration, testing and launch campaigns.
- Work with AIV teams to ensure designs are suitable for manufacture, assembly, integration and test.
- Produce and maintain technical documentation, specifications, ICDs, procedures and design reports.
- Provide technical input to key project reviews including PDR and CDR.
- Support procurement, supplier engagement and manufacturing activities.
- Mentor engineers and provide technical leadership across robotics activities.
About You
We're looking for an experienced robotics engineer with a strong background in complex, safety-critical systems.
Essential experience:
- Degree or equivalent qualification in Robotics, Systems Engineering, Aerospace Engineering or a related discipline.
- 5+ years' robotics engineering experience.
- Experience taking complex robotic/mechanism designs through concept, analysis, design, testing and operations.
- Commercial experience in robotics analysis, design, procurement and testing.
- Strong understanding of robotics kinematics, dynamics, sensors and actuators.
- Experience with robotics analysis/design tools such as ROS/ROS2.
- Understanding of robotics design trade-offs and operation within challenging environments.
- Experience managing requirements throughout the full project lifecycle.
- Good understanding of spacecraft or similarly complex engineering development programmes and lifecycle reviews.
- Experience developing innovative hardware or mechanical solutions to complex problems.
Desirable Experience
- Robotics experience within the space sector.
- Knowledge of robotic manipulation and capture technologies.
- Experience with magnetic systems or magnetic properties in capture mechanisms.
- SolidWorks or other CAD packages such as CATIA, NX or Creo.
- PDM experience.
- Multi-body dynamics modelling tools such as HyperWorks.
- Kinematic and robotics modelling/simulation.
- Python or VBA for engineering data processing and automation.
Whats on Offer
- Hybrid working and flexible core hours.
- Optional compressed working pattern.
- 25 days' holiday, increasing to 28 with service, plus Bank Holidays.
- Private healthcare, life insurance and long-term sick pay.
- Relocation support may be available.
- Modern engineering and cleanroom facilities.
- Regular social and team events.
- Opportunity to work on highly innovative robotic and spacecraft technologies.
TT....Read more...
Apply sound civil engineering knowledge, principles and practical techniques to support the planning, design and construction of engineering projects
Gather, interpret and evaluate technical data and information to inform engineering decisions, develop solutions and contribute to accurate civil engineering models and designs
Use industry-standard digital tools, including CAD and BIM software, to produce, update and review technical drawings, 3D models and engineering information in line with recognised standards, conventions and terminology
Promote and maintain high standards of health, safety and welfare across all civil engineering activities, following relevant legislation, company procedures and risk management requirements
Assist with the development, refinement and delivery of practical civil engineering solutions, ensuring that designs and technical outputs comply with applicable legislation, industry standards, specifications, codes of practice and project requirements
Incorporate environmental responsibility and sustainability into engineering activities, identifying opportunities to reduce carbon emissions, minimise waste and resource consumption, and support more sustainable project outcomes
Organise and manage your own workload effectively, delivering work to agreed quality, programme and cost requirements while considering client expectations, available resources and the wider impact of engineering decisions
Work collaboratively and professionally with colleagues, clients, contractors and other stakeholders, promoting equality, diversity and inclusion throughout the delivery of civil engineering projects
Maintain accurate technical records and documentation, ensuring information is clear, consistent, traceable and suitable for use throughout the project lifecycle
Continuously develop technical knowledge and professional skills, keeping up to date with changes in legislation, engineering standards, technology and best practice
Training:The successful candidate will work towards a Level 4 Senior Civil Engineering Technician Qualification which will take 24 months plus End Point Assessment (EPA).Training Outcome:Full-time role.Employer Description:Enable Futures, award-winning Shared/Flexi Job apprenticeship service will support you through your apprenticeship journey and professional development. We employ our apprentices directly and are listed on the Flexi Job Apprenticeship Register. We work with hosts in Yorkshire and the North East to provide apprentices in the construction and civil engineering industry.Working Hours :Monday to Friday 08:30 - 17:00.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
An events production company in London is hiring a Production Manager to take ownership of festival and event projects from brief through to delivery. This is a hybrid position with hands-on site work throughout the year.Here's what you'll be doing:Managing the full production lifecycle for festivals and live events, from initial client brief through to post-event debriefDesigning site layouts, production schedules and build/derig timelines for each projectCoordinating with health and safety, operations and licensing teams to ensure all events meet regulatory requirementsBuilding and maintaining supplier relationships, negotiating costs and managing procurement across multiple projectsPreparing and presenting production plans at SAG meetings and client reviewsManaging project budgets end to end, tracking spend against contingency and invoicing accuratelyRunning brainstorming sessions and contributing creative ideas to increase client engagement and on-site impactSupporting and mentoring junior team members on technical production skills and client communicationActing as the on-site production lead during live events, overseeing build, show days and derigHere are the skills you'll need:Hands-on experience in festival or outdoor event production, ideally across multiple seasonsStrong working knowledge of health and safety regulations, ESMPs and SAG processesConfident project manager with experience juggling multiple events at different stages simultaneouslyProficient in Microsoft Office, with working knowledge of CAD for site planningBudget management experience, including invoicing, contingency tracking and profitability analysisStrong supplier negotiation skills and an existing network of event industry contactsComfortable presenting to clients and local authority panelsKey perks and benefits:Hybrid working model blending office, home and on-site daysDiverse project portfolio covering festivals, placemaking and experiential activationsOpportunity to develop client relationships and take creative ownership of projectsCollaborative team environment with access to senior leadershipReal variety in the working week, from desk-based planning to live event deliveryWhy pursue a career in events production?Production management in events is one of the most hands-on careers you can build. You get to solve real problems in real time, work with creative teams and technical suppliers, and see the results of your planning play out in front of live audiences. The UK events industry has bounced back strongly, and skilled production managers who can deliver safely and within budget are consistently sought after.....Read more...
Company pension contributions of up to 8% and an annual leave entitlement of 25 days plus Bank Holidays are just a few of the perks that the Senior Manufacturing Engineer will enjoy whilst working for a Global Engineering and Manufacturing leader, with over 20 worldwide locations employing 1000 + staff. This employer is recognised globally for quality and innovative deliverables.The successful Senior Manufacturing Engineer will be easily able to commute to HUDDERSFIELD from surrounding towns & cities, including Leeds, Dewsbury, Halifax, Wakefield and Brighouse.Key Responsibilities of the Senior Manufacturing Engineer will include:
Be the Subject Matter Expert for manufacturing processes liaising between Design Engineer team and Machine Tool Operators
Provide technical guidance, problem solving skills and direction to the Manufacturing & Assembly teams to ensure quality standards and programme schedules are maintained
Advise on the manufacturability of components and ability of machines to achieve right first time during the design reviews
Lead PFMEA reviews including process mapping, risk mitigation and creation of approval procedures
Interpret and translate technical drawings into manufacturing drawings
Drive Continuous Improvement within each project
Create, maintain and improve works orders with accurate routings
For the Senior Manufacturing Engineer role, we are keen to receive CV’s from candidates who possess:
Experience as a Senior Manufacturing Engineer, within an Engineering environment where Turning, Boring, Milling and CNC processes are utilised
A working knowledge of assembly processes
A strong understanding of Geometric Dimensioning & Tolerancing
Ability to use 2D & 3D CAD
Experience CNC programming
Salary & Benefits:
£45,000 to £50,000 depending on experience
Monday to Friday
37.5 hours per week
25 Days annual leave + Bank holidays
Company pension contributions of up to 8%
Please be aware that many roles working for our client will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation.You must meet Right to Work in the UK criteria and achieve the required security and clearance requirements to undertake this role.To apply for the Senior Manufacturing Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
