Commercial Gas Engineer - Edinburgh - Salary up to £50,000 DOE CBW have a new opportunity for an experienced Commercial Gas Engineer to join a leading facilities company on a permanent basis covering Edinburgh and Fife. You will be responsible for delivering excellent service standards, while meeting SLA agreements and adhering to maintenance schedules. Key Responsibilities:Carry out planned, reactive, and emergency maintenance on gas appliances and associated systemsSupport plumbing and other tasks where/if requiredDiagnose faults and complete repairs within contractual timescalesComplete all documentation and certification accurately and on timePerson Specification:Qualified to City & Guilds Level II/III or equivalentCommercial gas qualifications: COCN1 or CODNCO1 (CCN1), TPCP1 & TPCP1A, ICPN1, CIGA1, CDGA1, CORT1Domestic gas qualifications Experience with HVAC systems, including air handling units would be beneficial but not essentialKnowledge of health and safety and safe working practicesSalary & Benefits:Salary up to £50,000 DOE25 days holiday plus bank holidays.Fully equipped company van (personal use optional).Generous overtime rates.Company pension scheme.....Read more...
Commercial Gas Engineer - Central Belt - Up to 50K DOE CBW have a new opportunity for a Commercial Gas Engineer will be responsible for the servicing, repair, and commissioning of a wide range of gas appliances, from light commercial units to large industrial systems. The role involves delivering high-quality work efficiently and diagnosing faults. Key Responsibilities:Service and maintain boilers, forced draught burners, water heaters, overhead radiant tubes, and warm air heaters.Identify, diagnose, and repair faults across a variety of commercial gas appliances.Commission boilers, burners, water heaters, and warm air units.Conduct testing and purging of pipework systems Participate in the on-call rota Liaise with the Helpdesk team to ensure workloads are completed and SLAs are met.Read and interpret site-specific RAMS.Work in accordance with pre-defined industry policies and guidelines. Essential Qualifications & Skills:Commercial gas qualifications: COCN1, CORT1, CIGA1, TPCP1 & 1A, ICPN1.Proven ability to service and fault-find on commercial gas appliances Strong problem-solving skills and ability to use initiative in challenging situations.Completion of an industry-standard apprenticeship.Full, clean driving license.Reliable, punctual, and flexible to support team operations.Able to work independently with limited supervision.Competent in operating handheld electronic devices.Salary & Benefits :Salary up to £50,000 DOEOT available Generous annual leavePrivate use of vanSick pay / health insurance....Read more...
Assembly Technician required to join a production team working on the mechanical, electrical and electronic manufacture of subsea oil and gas umbilical???s.
The ideal candidate will have maritime, Oil and Gas or similar heavy machinery component tooling experience however training will be provided.
Requirements
Practical mechanical hand tool experience with machine operation knowledge.
Electrical wiring, crimping, power, soldering, termination understanding.
The ideal candidate will have Oil and Gas, piping or subsea umbilical exposure.
Responsibilities
Work from job packets to perform routings, work orders and bills of material.
Test assemblies against requirements of cell projects.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.....Read more...
Assembly Technician required to join a production team working on the mechanical, electrical and electronic manufacture of subsea oil and gas umbilical???s.
The ideal candidate will have maritime, Oil and Gas or similar heavy machinery component tooling experience however training will be provided.
Requirements
Practical mechanical hand tool experience with machine operation knowledge.
Electrical wiring, crimping, power, soldering, termination understanding.
The ideal candidate will have Oil and Gas, piping or subsea umbilical exposure.
Responsibilities
Work from job packets to perform routings, work orders and bills of material.
Test assemblies against requirements of cell projects.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.....Read more...
We have an exciting opportunity for an Electrical Technician, competent at soldering, crimping and general wiring skills
Responsibilities
Perform soldering, crimping, and general wiring tasks for the installation, maintenance, and repair of electrical systems and downhole electronics equipment.
Conduct inspections and identify workmanship issues in downhole electronics equipment and processes.
Collaborate with engineers, electricians, and other team members to plan and execute electrical projects related to oil and gas operations.
Read and interpret electrical schematics, blueprints, and technical drawings specific to the oil and gas industry.
Requirements
High school diploma or equivalent: technical certification or associate degree in Electrical Technology or a related field is preferred.
Proficiency in soldering, crimping, and general wiring techniques.
Familiarity with electrical codes, regulations, and safety guidelines specific to oil and gas operations.
Experience working with downhole electronics equipment and processes....Read more...
We have an exciting opportunity for an Electrical Technician, competent at soldering, crimping and general wiring skills
Responsibilities
Perform soldering, crimping, and general wiring tasks for the installation, maintenance, and repair of electrical systems and downhole electronics equipment.
Conduct inspections and identify workmanship issues in downhole electronics equipment and processes.
Collaborate with engineers, electricians, and other team members to plan and execute electrical projects related to oil and gas operations.
Read and interpret electrical schematics, blueprints, and technical drawings specific to the oil and gas industry.
Requirements
High school diploma or equivalent: technical certification or associate degree in Electrical Technology or a related field is preferred.
Proficiency in soldering, crimping, and general wiring techniques.
Familiarity with electrical codes, regulations, and safety guidelines specific to oil and gas operations.
Experience working with downhole electronics equipment and processes....Read more...
We are a passionate family business that has been established for 50 years and a market leading retail shop selling gas, electric and solid fuel fires and fireplaces.
Duties will include:
Drive sales in the showroom
Manage the end to end customer experience
Communicate with suppliers
Manage the displays in the showroom
Receive and dispatch merchandise
Manage social media
Maintain and develop website
Manage stock room
General maintenance
Administration
Training:
Retailer Level 2 Apprenticeship Standard
End Point Assessment
Blended on/off the job training and location to be confirmed
Training Outcome:
The opportunity for progression within the company make this an exciting and life changing possibility for the right candidate
Employer Description:The Heating Centre is a family run business and have been established for 50 years. We can arrange installation by HETAS qualified and Corgi and Gas Safe registered installers. We’re solid fuel specialists, with a fabulous range of wood burning and multifuel stoves, both indoor and outside stoves from many manufacturers, including Stovax, Yeoman, Arada, Mendip, Burley and Broseley. Have a look at our wide and varied range of marble and stone fireplaces from such names as Natura, Classic Fireplaces, Farmington Fireplaces and Wessex Stone. For traditional and period properties we have a great selection of cast iron and wooden fireplaces from Acquisitions of London, Focus Fireplaces and GB Mantels. Looking for something more modern? We also specialise in minimalist hole in the wall fires from leading manufacturers such as Barbas Bellfires, Kinder, Gazco and Faber. We also stock a superb range of gas and electric fires that use the very latest technology to achieve simply stunning effects with all the convenience that only gas and electric fires can offer. The team here at The Heating Centre can do everything from helping you choose your fireplace, to organising an installation by independent accredited engineers. Whether you are looking for solid fuel or wood burning stoves, gas fires, electric fires, gas stoves, electric stoves or a new fireplace, we will be able to help. Want to visit us in person? We have over 200 fireplaces, beautifully displayed within our spacious showrooms for you to consider. The best part? You’re guaranteed internet prices on almost all of our products when you visit our Coventry showroom. We cover Coventry, Leamington Spa, Kenilworth, Warwick, Solihull, Knowle, Stratford on Avon, Rugby and all Surrounding Areas in Warwickshire and West Midlands.Working Hours :Monday - Friday, 8.30am - 5.30pm with 1 hour for lunch - Will work on Saturdays with a fixed day off in the week to be agreed.Skills: IT skills,Attention to detail,Organisation skills,Customer care skills,Keen eye for detail,Must be very organised,Self motivated,Conscientious,Communicate with customers....Read more...
Welding Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join an aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Welding Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join an aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
To support the servicing, maintenance, and repair of gas CHP (Combined Heat and Power) systems while undertaking a structured apprenticeship program
Assist in the planned and reactive maintenance of gas CHP units across customer sites
Shadow experienced engineers to learn diagnostic and fault-finding techniques.
Support the installation, commissioning, and decommissioning of CHP systems
Record service data accurately using company reporting tools and software
Maintain tools, equipment, and company vehicle in good condition (if applicable)
Attend all required training courses (on-the-job and classroom-based)
Build a working knowledge of CHP system components including engines, generators, controls, and gas systems
Develop customer-facing professionalism while working on live sites
Always adhere to health and safety protocols
Training:Apprentices will be required to attend training at least x1 day per week to complete necessary mandatory training and units associated with the apprenticeship.
The apprentice will be required to complete:
Work towards gaining a full Qualification
Employment Rights and Responsibilities
Skills, Knowledge, and Behaviours
Standard and End Point Assessment
Functional Skills in English, maths, and ICT (if required)
Other training will be provided by the employer as required to enable the fulfilment of the job role. Product specific training provided as part of our internal CPD by uk providers and our training facility in Germany. Training Outcome:
The apprentice will gain the technical skills, safety awareness, and experience required to progress toward becoming a qualified CHP Service Engineer, Commissioning Engineer
Employer Description:Manufacture, install and maintain gas fired CHP plants throughout the UK.Working Hours :Monday - Friday, 8.00am - 5.00pmSkills: Attention to detail,Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Number skills,Logical,Team working,Creative,Initiative,Physical fitness....Read more...
This role involves working with high-pressure gas and fluidic systems, engine testing, and test facility operations to ensure optimal performance and safety standards.
Key Responsibilities
Conduct engine testing and ensure correct feedline pressures are set.
Operate and maintain mechanical and steam vacuum systems.
Perform pressure and control system checks.
Set up and operate Data Acquisition Systems and thermal imaging cameras.
Carry out instrumentation calibrations and ensure compliance with testing standards.
Work extensively with high-pressure gas and fluidic systems.
Experience Required:
Strong mechanical fitting skills.
Solid understanding of mathematics and physics.
Hands-on experience in engine testing and test facility operations.
Experience in maintenance and operation of mechanical systems.
....Read more...
Machinist required to join an steel tubing manufacturing team who produce offshore and subsea umbilicals comprising of mechanical machined metal components and electrical connectors for power transfer and control communications.
You will help ensure that Oil and gas subsea equipment is produced, assembled and delivered on time by maintaining workshop and field tooling equipment.
Requirements
Metal working, tooling machining, CNC experience.
The ideal candidate will have offshore, subsea or oil and gas equipment experience.
Responsibilities
Operate tools, machining and production equipment.
Maintain equipment and manufacturing systems tools helping drive continuous improvement.
Work from pre job and Toolbox crew and assembly meetings.
Failure investigation as relevant. ....Read more...
Commercial heating installations
New build installations
Periodic testing and servicing
Training Outcome:
To gain their qualifications. progression through a commercial gas course including catering gas if they wish
Employer Description:Mechanical and electrical contractor, serving east anglia and further afieldWorking Hours :Monday to Friday
7am- 4pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Team working,Initiative....Read more...
This role involves working with high-pressure gas and fluidic systems, engine testing, and test facility operations to ensure optimal performance and safety standards.
Key Responsibilities
Conduct engine testing and ensure correct feedline pressures are set.
Operate and maintain mechanical and steam vacuum systems.
Perform pressure and control system checks.
Set up and operate Data Acquisition Systems and thermal imaging cameras.
Carry out instrumentation calibrations and ensure compliance with testing standards.
Work extensively with high-pressure gas and fluidic systems.
Experience Required:
Strong mechanical fitting skills.
Solid understanding of mathematics and physics.
Hands-on experience in engine testing and test facility operations.
Experience in maintenance and operation of mechanical systems.
....Read more...
Machinist required to join an steel tubing manufacturing team who produce offshore and subsea umbilicals comprising of mechanical machined metal components and electrical connectors for power transfer and control communications.
You will help ensure that Oil and gas subsea equipment is produced, assembled and delivered on time by maintaining workshop and field tooling equipment.
Requirements
Metal working, tooling machining, CNC experience.
The ideal candidate will have offshore, subsea or oil and gas equipment experience.
Responsibilities
Operate tools, machining and production equipment.
Maintain equipment and manufacturing systems tools helping drive continuous improvement.
Work from pre job and Toolbox crew and assembly meetings.
Failure investigation as relevant. ....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
Oil and Gas drilling equipment Reliability Engineer required: this role would be a good fit for a Field Maintenance Technician looking to be onshore.
In this role you will be part of a hands on team preparing Oil and Gas equipment for offshore and land operations.
You will
Verify the status of equipment certifications and calibrations.
Perform or assist in final function testing such as calibration, inspection, certification or verification, which may include Wireline Operational Combination Check, pressure test, measurement calibration, metrological inspection.
Prepare equipment and associated critical spares for shipment and staging to a pre determined location or loading zone.
Load equipment onto trucks in the absence of base or operational planning support, or the Equipment Readiness Operator or Technician.
....Read more...
Oil and Gas drilling equipment Reliability Engineer required: this role would be a good fit for a Field Maintenance Technician looking to be onshore.
In this role you will be part of a hands on team preparing Oil and Gas equipment for offshore and land operations.
You will
Verify the status of equipment certifications and calibrations.
Perform or assist in final function testing such as calibration, inspection, certification or verification, which may include Wireline Operational Combination Check, pressure test, measurement calibration, metrological inspection.
Prepare equipment and associated critical spares for shipment and staging to a pre determined location or loading zone.
Load equipment onto trucks in the absence of base or operational planning support, or the Equipment Readiness Operator or Technician.
....Read more...
