Specialists required for the deployment of technology and service delivery at Oil & Gas clients field operating sites. The surface logging specialist will be fully UK North Sea certified and required to work offshore on an Adhoc basis.
Key skills
Degree in Geology, Geological Applied Sciences, Earth Sciences or Applied Sciences.
Drilling Equipment and Technique knowledge:
Calculation of Lag Time
Wellbore pressures
Petroleum Geology
Evaluation Log Drafting
Drilling Fluids
Hydraulics
Hydrocarbon Detection etc.
Responsibilities
Monitoring all the well parameters
Maintaining Geoservices sensors to detect the well conditions
Maintain the gas detection equipment to analyze the hydrocarbon
Ensure safety by detection of other potentially harmful gases by.
Own the integrity of the samples collected.....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
The successful candidate will support hazardous operations, testing firing sites. You will work closely with Lead Test Engineers to prepare and maintain test sites, handle propellants, conduct sampling and analysis, and perform various critical operational tasks.
Key Responsibilities
Ensure correct feedline pressures are set for testing procedures.
Assist Lead Test Engineers with site preparation and maintenance.
Handle and sample propellants, conduct analysis, and perform system checks.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and maintain steam boiler operations.
Collate and review test data for reporting and analysis.
Operate high-pressure gas and fluidic systems with expertise.
Utilize electrical and electronic measurement and testing equipment.
Prepare, install, remove, and decontaminate customer flight hardware, including test engine instrumentation.
Skills and Competencies
Proven experience as a Mechanical Fitter.
Strong understanding of high-pressure gas and fluidic systems.
Ability to read and interpret Piping and Instrumentation Diagrams.
Experience with mechanical systems, vacuum systems, and steam boiler maintenance.
Proficient in using measurement and testing equipment....Read more...
The successful candidate will support hazardous operations, testing firing sites. You will work closely with Lead Test Engineers to prepare and maintain test sites, handle propellants, conduct sampling and analysis, and perform various critical operational tasks.
Key Responsibilities
Ensure correct feedline pressures are set for testing procedures.
Assist Lead Test Engineers with site preparation and maintenance.
Handle and sample propellants, conduct analysis, and perform system checks.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and maintain steam boiler operations.
Collate and review test data for reporting and analysis.
Operate high-pressure gas and fluidic systems with expertise.
Utilize electrical and electronic measurement and testing equipment.
Prepare, install, remove, and decontaminate customer flight hardware, including test engine instrumentation.
Skills and Competencies
Proven experience as a Mechanical Fitter.
Strong understanding of high-pressure gas and fluidic systems.
Ability to read and interpret Piping and Instrumentation Diagrams.
Experience with mechanical systems, vacuum systems, and steam boiler maintenance.
Proficient in using measurement and testing equipment....Read more...
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilise digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.
....Read more...
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organization.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialized leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilize digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.
....Read more...
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilise digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.
....Read more...
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focuses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organization.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialized leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilize digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.
....Read more...
Mechanical Design Engineer required to join a successful team ideally with experience in the oil and energy industry.
Key Skills
Creo, SolidWorks, ANSYS and ideally AutoCAD
project documentation,
Oil & Gas and Mechanical Engineering.
Mechanical Design Engineer required to join a successful team ideally with experience in the oil and energy industry.
Key Skills
Creo, SolidWorks, ANSYS and ideally AutoCAD
project documentation,
Oil & Gas and Mechanical Engineering.
Manufacturing Mechanical Design Engineer required to join a successful team ideally with experience in the oil and energy industry.
Key Skills
Creo, SolidWorks, ANSYS and ideally AutoCAD
project documentation,
Oil & Gas and Mechanical Engineering.
Manufacturing Mechanical Design Engineer required to join a successful team ideally with experience in the oil and energy industry.
Key Skills
Creo, SolidWorks, ANSYS and ideally AutoCAD
project documentation,
Oil & Gas and Mechanical Engineering.
My client is looking for a senior software developer ideally with C++, C#.Net and Java exposure to work on their Cloud migration of complex web enabled desktop GUI applications. Scientific or Oil & Gas large software development project experience would be ideal for high availability systems and intuitive but highly complex user interfaces.
My client is looking for a senior software developer ideally with C++, C#.Net and Java exposure to work on their Cloud migration of complex web enabled desktop GUI applications. Scientific or Oil & Gas large software development project experience would be ideal for high availability systems and intuitive but highly complex user interfaces.
Static Air Conditioning Engineer - FM Service Provider - High End Residential - Battersea, South West London - Up to £50,000 per annumExciting opportunity to work for a leading FM service provider situated in Battersea, South West London. I am currently recruiting for an experienced Air Conditioning & Refrigeration Engineer to be based in a static role in Battersea, South West London based on a High End Residential Estate as apart of a 3 person team. The successful candidate will be a full qualified Air Conditioning & Refrigeration Engineer with C&G / NVQ / F-Gas. Although this is a static position, he or she will be required to carry out all aspects of service and breakdown on split systems, VRV's, VAV's and VRF's, AHU's, FCU's, Chillers, condensors and all HVAC and refrigeration plant across this large site. In return the company is offering a competitive salary paying up to £50,000, overtime and career progression.Hours of workMonday to Friday (40 Hour week)08:00am to 17:00pm No Call Out Overtime available Working in a 3 person Team RequirementsNVQ Level 2 Refrigeration & Air conditioning (Minimum)F-GAS 2079 Cat 1 (Essential)Good Air conditioning maintenance knowledgeRefrigeration experience Knowledge of ChillersExtensive experience working within a commercial environmentsBuilding Services experienceGood communication skillsPlease send your CV to apply Dan Barber at CBW Staffing Solutions for more Information!....Read more...
Mobile Chiller Engineer - FM service provider - London and the South East - Paying Up To 60k About the Role: CBW Staffing Solutions are currently recruiting a Mobile Chiller Engineer to be cover London and the South East. He or she will be required to travel from site to site to carry out Planned Maintenance and reactive maintenance on Chillers. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance or commercial settings. In return, the company is offering a competitive salary of up to £60,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:Monday to Friday 8:00 am-17:00 pm25 days holiday + Bank HolidaysVan & Fuel CardTablet & Work Phone ProvidedFull company uniform Private use of VanTons of overtime Paying up to £60,000Hours of workMonday to Friday – 08:00 am to 17:00 pmKey Responsibilities:Preventative Maintenance (PPM): Conduct routine preventative maintenance on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity.Fault Diagnosis & Repair: Diagnose complex mechanical, electrical, and refrigeration faults efficiently and accurately, performing effective repairs on components such as compressors, condensers, evaporators, control systems, pumps, and pipework.F-Gas Management: Carry out F-Gas leak detection, recovery, and recharging in strict compliance with current F-Gas regulations and environmental standards.System Optimisation: Proactively identify opportunities for system optimisation and efficiency improvements, advising clients on best practices and potential upgrades.Client Interaction: Liaise professionally and directly with clients, providing clear explanations of work carried out, identifying any further required works, and building strong working relationships.Documentation & Reporting: Complete accurate service reports, timesheets, expense submissions, and other administrative tasks promptly and efficiently, utilising mobile technology.Health & Safety: Adhere strictly to all company and site-specific health and safety regulations, including risk assessments and method statements.On-Call Rota: Participate in an out-of-hours on-call rota for emergency breakdowns as required which is currently every 14 weeks.Technical Support: Provide technical guidance and support to junior technicians or apprentices when appropriate.Requirements:17th/18th Edition IET Wiring Regulations.IOSH or NEBOSH safety qualifications.CSCS Card, IPAF, PASMA certification.Experience with building management systems (BMS) and controls.Familiarity with absorption chillers.Please send your CV to Joe Mann of CBW staffing solutions to ensure you do not miss this great opportunity. ....Read more...
Field Service Engineer
Northampton
£42,000 - £45,000 + Door to Door Pay + No Call Out + Training + Local Patch + Van + Pension + Healthcare
Currently a Field Service Engineer with experience working on commercial boilers? If so, this is a brilliant chance to join a well-respected, growing company that offers long term security and a good work life balance - Local Patch and no call out.
Enjoy working close to home for a growing company that is consistently winning new contracts. You’ll benefit from technical development and a role that allows you to maintain a good work-life balance. This role is best suited for a Field Service Engineer wanting to stay closer to home and progress technically.
Your Role As A Field Service Engineer Will Include:
Field Service Role - Covering a Regional Patch
Service, Maintenance & Repair of Steam Boilers
Customer Facing In Various Settings
As A Field Service Engineer You Will Have:
Gas Tickets
Commercial or Industrial Background
Full UK Driving License
Keywords: Heating, Plantroom, Maintenance, Service, Plumbing, Commercial, Boiler, Leicester, Hinckley, Midlands, Renewable, Gas, Pipework, Heaters, Testing, Plumber, Engineer
....Read more...
We are looking for a Welding Production Technician with strong TIG welding skills to join an aerospace cleanroom production team.
Responsibilities:
Manual TIG welding of precision aerospace components.
Preparing welds, inspections, and reports to aerospace standards.
Assembly and testing of valves, thrusters, and fluidic components.
Leak testing with helium mass spectrometers and high-pressure gases.
Electrical and gas flow testing to ensure performance and tolerance.
Experience with aerospace components (valves, thrusters, fluidics) is desirable. ....Read more...
We are looking for a Welding Production Technician with strong TIG welding skills to join an aerospace cleanroom production team.
Responsibilities:
Manual TIG welding of precision aerospace components.
Preparing welds, inspections, and reports to aerospace standards.
Assembly and testing of valves, thrusters, and fluidic components.
Leak testing with helium mass spectrometers and high-pressure gases.
Electrical and gas flow testing to ensure performance and tolerance.
Experience with aerospace components (valves, thrusters, fluidics) is desirable. ....Read more...
Structural Engineer to join a growing team working on civil and structural engineering designs for infrastructure, rail, oil, gas, petrochemical and other industrial sectors.
Requirements
Degree in Civil or Structural Engineering.
Commercial design experience on structural projects.
UK standards or Euro Codes knowledge.
Ability to work on diverse projects across varying sectors.
Role
Produce engineering design including calculations, design work and design management.
Review calculations performed by other engineers.
Capture client requirements and attend site visits.....Read more...
Structural Engineer to join a growing team working on civil and structural engineering designs for infrastructure, rail, oil, gas, petrochemical and other industrial sectors.
Requirements
Degree in Civil or Structural Engineering.
Commercial design experience on structural projects.
UK standards or Euro Codes knowledge.
Ability to work on diverse projects across varying sectors.
Role
Produce engineering design including calculations, design work and design management.
Review calculations performed by other engineers.
Capture client requirements and attend site visits.....Read more...
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom....Read more...
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom....Read more...
Mobile Chiller Engineer - FM service provider - London and the South East - Paying Up To 60k My Client is a leading provider of innovative HVAC and refrigeration solutions, dedicated to delivering exceptional service and cutting-edge technology to our diverse client base. They specialise in the installation, maintenance, and repair of commercial and industrial chiller systems, ensuring optimal performance and energy efficiency for our customers. CBW Staffing Solutions are currently recruiting a Mobile Chiller Engineer to be cover London and the South East. He or she will be required to travel from site to site to carry out Planned Maintenance and reactive maintenance on Chillers. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in building maintenance or commercial settings. In return, the company is offering a competitive salary of up to £60,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:Monday to Friday 8:00 am-17:00 pm25 days holiday + Bank HolidaysVan & Fuel CardTablet & Work Phone ProvidedFull company uniform Private use of VanTons of overtime Paying up to £60,000Hours of work:Monday to Friday – 08:00 am to 17:00 pmKey Responsibilities:Preventative Maintenance (PPM): Conduct routine preventative maintenance on diverse chiller systems, including air-cooled, water-cooled, absorption, and adiabatic chillers, to ensure optimal performance and longevity.Fault Diagnosis & Repair: Diagnose complex mechanical, electrical, and refrigeration faults efficiently and accurately, performing effective repairs on components such as compressors, condensers, evaporators, control systems, pumps, and pipework.F-Gas Management: Carry out F-Gas leak detection, recovery, and recharging in strict compliance with current F-Gas regulations and environmental standards.System Optimisation: Proactively identify opportunities for system optimisation and efficiency improvements, advising clients on best practices and potential upgrades.Client Interaction: Liaise professionally and directly with clients, providing clear explanations of work carried out, identifying any further required works, and building strong working relationships.Documentation & Reporting: Complete accurate service reports, time-sheets, expense submissions, and other administrative tasks promptly and efficiently, utilizing mobile technology.Health & Safety: Adhere strictly to all company and site-specific health and safety regulations, including risk assessments and method statements.On-Call Rota: Participate in an out-of-hours on-call rota for emergency breakdowns as required which is currently every 14 weeks.Technical Support: Provide technical guidance and support to junior technicians or apprentices when appropriate.Requirements:17th/18th Edition IET Wiring Regulations.IOSH or NEBOSH safety qualifications.CSCS Card, IPAF, PASMA certification.Experience with building management systems (BMS) and controls.Familiarity with absorption chillers.Please send your CV to Joe Mann of CBW staffing solutions to ensure you do not miss this great opportunity. ....Read more...
Quality Engineer required for a global leader in high-performance products in the Oil & Gas sector. Operating for 50 years, this internationally recognised organisation operates in over 150 countries, supplying engineered solutions to some of the world’s most demanding industries. Due to continued growth, they are now recruiting for a Quality Engineer to join their team in Brighouse, West Yorkshire.
This opportunity is based in Brighouse, making it easily commutable from surrounding areas including Huddersfield, Halifax, Bradford, Wakefield, and Leeds.
Key Responsibilities of the Quality Engineer will include:
Supporting the Quality Manager in maintaining ISO 9001 Quality Management System (QMS)
Conducting internal system audits and managing corrective/preventative actions
Maintaining QMS procedures, reviewing effectiveness, and updating documentation
Assisting during 3rd Party/Client/LQRA audits and resolving non-conformances
Reviewing and creating Inspection Test Plans (ITPs)
For the role of Quality Engineer, we are keen to receive applications from individuals who have:
Lead/Internal Auditor certification for ISO9001:2015
Experience working in environments driven by technical specifications
Minimum 3 years’ experience in manufacturing, ideally within Oil & Gas
Strong communication skills across all levels
Logical and critical thinking for problem-solving
Planning and organisational skills
Technical knowledge of pressure-retaining material specifications
Salary & Benefits on offer for the Quality Engineer:
Competitive salary £34k - £40k DOE
33 days annual leave (including flexible, statutory, and end-of-year shutdown holidays)
pension scheme in line with automatic enrolment
Excellent working conditions in a modern manufacturing environment
To apply for the Quality Engineer position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Lewis Lynch at E3 Recruitment for more information.....Read more...
