An average week for the apprentice will be working from drawings to produce steel structures
This would include marking out, grinding, drilling, folding, flame/plasma cutting and welding
Other duties would include maintaining a clean and safe workspace and the loading and offloading of materials using overhead cranes and forklift (once training as been received)
Training:
As an apprentice, you’ll work at a company and get hands-on experience
You’ll gain new skills and work alongside experienced staff
Training Outcome:
After the completion of the apprenticeship the candidate will have the opportunity to progress in the company in to foreman, draftsman or site work
Employer Description:Leading Suppliers and installers of quality stairs, balustrades and architectural metalwork. Working throughout the UK and beyond. Raven Project Metals Ltd offer a professional service, with an outstanding H & S record. We have worked on several notable buildings, designing, manufacturing and installing structural and architectural metalwork, working with steel, stainless steel, aluminium, glass and timber. a few of our main clients are noted at the foot of this page.Working Hours :Monday - Thursday, 08:00 - 17:00 and Friday, 08:00 - 13:00Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
As an apprentice at Pomphrey and Sons you will hone your skills in Engineering and Maintenance of all types of equipment, to become a highly skilled Engineer
The successful candidates will work in the maintenance/service department of Pomphrey and Sons, maintaining, servicing and repairing of all the equipment supplied and used by our customers
When starting out you will learn the business and carry out tasks such as; steam cleaning of equipment, the tidying of the workshop, the spray painting of the repaired equipment
You will then progress onto helping the skilled engineers out
This will be by stripping equipment down, turning, welding and milling
Once you have a good skill set you will help the service engineers on site, to help install pipework, lifts, air compressor and to repair all types of workshop garage equipment
Training:
Maintenance and Operations Engineering Technician Level 3
Training Outcome:
To become a skilled engineer within the Maintenance and Service team of Pomphrey and Sons Ltd
Employer Description:Pomphrey and Sons is the south west largest garage equipment company. We install repair and service all type of garage equipment.Working Hours :8.00am - 5.00pm with an hour for lunch and a 20-minute break in the morning, working days TBCSkills: Communication skills,Organisation skills,Initiative....Read more...
Assisting with building and assembling trailers, including chassis, axles, suspension and body components
Using hand tools, power tools and workshop equipment to fit parts accurately
Reading drawings and specifications to ensure builds meet design and safety standards
Supporting maintenance and repairs on trailers and components
Learning welding, drilling, cutting and mechanical fitting techniques
Carrying out quality checks and inspections during and after assembly
Following health &; safety procedures in a busy manufacturing environment
Working alongside experienced fitters and engineers while completing formal training
Training:
Engineering Fitter Level 3
1-day per week to take place at Northampton College
Training Outcome:Structured training with promotion from within for successful candidates. Employer Description:For over 60 years King Trailers bespoke manufacturing approach has allowed us to build specialist trailers for specific applications in the defence, nuclear, aviation and oil and gas industries as well as providing ‘off the shelf’ lowloader trailer models for more standard transportation requirements. We are also a leading manufacturer of beavertail plant bodies mounted on any vehicle designed and built to your requirements. Working Hours :Monday - Thursday 7am - 5pm.Skills: Communication skills,Attention to detail,Customer care skills,Team working....Read more...
As a Business Administration Apprentice, you will support the day-to-day running of our busy electrical and mechanical engineering business while working towards your Level 3 Business Administration qualification.
Your duties will include:
Adding new jobs, quotations and customer information to our management system
Updating engineer labour, timesheets and job records
Assisting with the preparation and processing of invoices
Answering telephone calls and responding to customer enquiries
Managing emails and supporting general office administration tasks
Filing and maintaining electronic and paper-based records
Liaising with customers, suppliers and colleagues in a professional manner
Learning company procedures and business processes to support the smooth running of the business
Assisting with purchasing, ordering materials and supplier enquiries as experience develops
Supporting stock control and stores administration activities as part of your long-term development
This role offers the opportunity to gain experience across multiple areas of the business, with a clear progression pathway into purchasing, procurement and operational support following successful completion of the apprenticeship.Training:
The apprentice will be working towards the Business Administrator Level 3 Apprenticeship Standard including a City & Guilds Level 3 Diploma for the Business Administrator
Monthly classes at Colchester Institute (Colchester Campus)
Training Outcome:This is intended to be a long-term position within the business rather than solely an apprenticeship placement. Upon successful completion of the Level 3 Business Administration Apprenticeship, the successful candidate will have the opportunity to progress into a more operational role involving stores, purchasing and supplier management.
As part of this progression, there may be the opportunity to undertake a Level 3 Procurement and Supply qualification to further develop knowledge and skills within purchasing and procurement.
The long-term aim is to develop the successful candidate into a key member of the business with a broad understanding of office administration, purchasing, stores management and business operations, providing support across multiple departments and opportunities for continued career development.Employer Description:We are an established electrical and mechanical engineering company based in Colchester, providing installation, maintenance, repair and breakdown services to commercial and industrial customers across Essex, Suffolk and the surrounding areas.
With a team of approximately 15 employees, we deliver a wide range of services including electrical installations, control systems, machinery repairs, mechanical breakdowns, welding and fabrication, pump and motor maintenance, fault finding and planned preventative maintenance. We pride ourselves on providing a professional, reliable service and building long-term relationships with our customers.
Much of our work comes from repeat business and customer recommendations, reflecting our reputation for quality workmanship, responsiveness and customer service. Whether supporting a planned project or responding to an urgent breakdown, we aim to provide practical engineering solutions that keep our customers operating effectively across administration, operations, stores and procurement within a busy engineering environment.
We are an established electrical and mechanical engineering company based in Colchester, providing installation, maintenance, repair and breakdown services to commercial and industrial customers across Essex, Suffolk and the surrounding areas.
With a team of approximately 15 employees, we deliver a wide range of services including electrical installations, control systems, machinery repairs, mechanical breakdowns, welding and fabrication, pump and motor maintenance, fault finding and planned preventative maintenance. We pride ourselves on providing a professional, reliable service and building long-term relationships with our customers.
Much of our work comes from repeat business and customer recommendations, reflecting our reputation for quality workmanship, responsiveness and customer service. Whether supporting a planned project or responding to an urgent breakdown, we aim to provide practical engineering solutions that keep our customers operating effectively across administration, operations, stores and procurement within a busy engineering environment.Working Hours :Monday to Friday 8am to 4pm with a 1/2 hour lunch break each daySkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Up to £19.00 per hour (DOE) + Monday to Friday Days + Long-Term Opportunity Join a growing specialist vehicle manufacturer with an excellent reputation for designing and building high-quality commercial vehicles. Due to continued investment and a strong order book, the company is looking to recruit an experienced MIG Welder Fabricator to support its expanding production team.
Benefits of the MIG Welder Fabricator role:
Up to £19.00 per hour depending on experience
Monday to Friday, 8:00am – 5:00pm
Weekly pay
Long-term temporary role with the opportunity to become permanent
Stable workload with a well-established specialist vehicle manufacturer
Supportive and friendly working environment
Duties of the MIG Welder Fabricator:
MIG welding and fabrication of specialist vehicle bodywork and steel components
Working from engineering drawings and technical specifications
Fabricating, assembling and modifying steel structures
Inspecting completed work for accuracy and finish
Working as part of a busy production team to meet build schedules
We would welcome people to apply that have:
Previous experience as a MIG Welder Fabricator
Ability to read and interpret engineering drawings
Be able to MIG weld mild steel up to 10mm
Reliable with a positive attitude and strong work ethic
If you would like a private chat to about the role, please contact Rodger Morley at E3 Recruitment. ....Read more...
Panel Beater role:
We are currently seeking an experienced and skilled Panel Beater to join a busy, professional Accident Repair Centre in the Diss area.
This is an excellent opportunity to become part of a well-established repair operation where quality workmanship, attention to detail, and customer satisfaction are at the heart of everything they do.
Key Panel Beater Roles and Responsibilities:
- Carry out precise vehicle body repairs using body alignment jigs and specialist equipment.
- Restore damaged panels through expert straightening, reshaping, and filling techniques.
- Remove and replace damaged panels to manufacturer and industry standards.
- Perform welding, bonding, and structural repair work on a wide range of vehicles.
- Identify and record all parts required for repairs, ensuring accuracy throughout the repair process.
- Work efficiently while maintaining the highest standards of quality and safety.
Minimum Requirements as a Panel Beater:
- Time-served Panel Beater or qualified to City & Guilds, NVQ, or equivalent vocational standard.
- ATA accreditation would be advantageous but is not essential.
- Strong attention to detail with the ability to consistently produce high-quality repairs.
- Ability to work effectively both independently and as part of a busy Bodyshop team.
- A positive attitude and commitment to delivering outstanding workmanship.
Benefits
- Basic Salary up to £59,000 per annum
- Monday to Friday Flexible Start / Finish times
- Plus over time paid at time and half and have plenty available
- Pension
- 28 days holiday including bank holidays
- Excellent working environment
- Permanent Role.
If you want to hear more about the Panel Beater role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.....Read more...
1. Material handling.
2. Cutting metals on guillotine and circle cutting machines.
3. Set up and operating press machines.
4. Assembly of finished product.
5. Metal Spinning on hand lathe.
6. Set up and operation of PNC machine.
7. Spot welding.Training:Level 3 Engineering Technician Apprenticeship on the Product Design and Development pathway.
Day release at Sunderland College City Campus.Training Outcome:Possibility of a full-time role upon successful completion of apprenticeship.Employer Description:We are a small metal spinning company that has been in business for 35 years.
We make products for a wide range of businesses including filter components, the caravan industry and musical instruments.We all work together as a team with everyone filling in where needed to keep production running smoothly.
Our factory is open from 7am Monday to Thursday with limited public transport available at this time of the morning.The job can be physically demanding.Attention to detail is very important to meet customers expectations.Working Hours :Monday to Thursday 8am to 4pm, 32 hours per week with 30 mins each day for lunch.Skills: Attention to detail,Number skills,Analytical skills,Team working,Initiative,Physical fitness....Read more...
As a Vehicle Damage Panel Technician, you will:
Repair and replace vehicle body panels after collision damage. This includes working with structural components, welding, and using specialist tools to restore vehicles to their original condition
You’ll operate in a modern workshop environment, handling a variety of vehicles from cars to light commercial vans
Teamwork, precision, and a strong focus on customer satisfaction are key to success in this role
Training:
Training Provider: Blackpool & The Fylde College
Block release: College attendance at Blackpool & The Fylde College approximately 1 week every 6 weeks
Accommodation provided at Fleetwood Nautical Campus
Training Outcome:
Future Prospects: A full-time position will be available on successful completion of the apprenticeship with future career development
Training Provided: Apprentices will work towards completing their Level 3 Apprenticeship (Level 4 for Vehicle Damage Assessor)
Employer Description:Our Group consists of 15 Accident Repair Centre’s covering Scotland, Cumbria, North West England and East and West Midlands regions.
All L&I Eaton Accident Repair Centres are strategically located throughout the country, offering coverage across all the major cities in the UK, and repairing over 20,000 vehicles annually. Working Hours :Monday - Friday, 07:00 - 16:00 or 08:00 - 17:00.Skills: Communication skills,Attention to detail,Organisation skills,Logical,Team working,Initiative,Physical fitness....Read more...
Welding
Fabrication
Fitting and assembly
General production engineering
Training:
As part of your apprenticeship, and dependent on your prior attainment and age, you may be required to complete English and maths Functional Skills which is an integral part of your apprenticeship
Upon successful completion you will be awarded additional certificates of recognition for these qualifications
Training Outcome:
Full time position with the company
Employer Description:We specialise in providing equipment that meets each customer’s individual requirements. As part of this service, we offer site visits, independent advice and much more.
We offer a comprehensive range of balers, compactors and bespoke equipment to rent or purchase, and on occasion we can offer reconditioned machines at competitive prices.
We provide on-site maintenance and repairs to machinery, service plans and supply spare parts and consumables.
We offer nationwide coverage with fully equipped mobile units for service and repairs, rapid response to customers’ calls, with breakdown prioritisation and full workshop facilities for major repairs, including overhauls.
Whether or not Systematic supplied the machine, we can service it, repair it or recondition it, and provide spares for it.Working Hours :Monday - Thursday, 9.00am - 5.00pm and Friday, 9.00am - 4.00pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience,Physical fitness....Read more...
An opportunity has arisen for a Welder Fabricator to join a leading manufacturer permanently, with an early finish on a Friday, regular overtime paid a premium, ongoing development, and job security.Employing over 200 employees across multiple sites in the UK, this industry-leading organisation continues to experience significant growth and success, making it an ideal time join and grow with the business.Key Responsibilities of the Welder Fabricator
Welding and Fabricating to a high standard.
Working from detailed engineering drawings.
Working with mild and galvanised steel.
Working towards customer deadlines.
Working hours of the Welder Fabricator
Monday To Thursday: 07:30-16:30
Friday: 07:30-12:30
Minimum Experience/ Skills Required
Comfortable and experienced Welder Fabricator.
Ability to read from engineering drawings.
Ability to work within a fast-paced working environment.
Strong work ethic and attention to detail.
In Return, the Welder Fabricator will receive
Basic Salary: £15- £17 Per Hour.
Early finish on a Friday.
Regular overtime paid at a premium.
Ongoing training and development.
20 days holiday + Bank holidays (Holidays increasing with Length in Service)
If you would like to be considered for the role, please click “apply now” and attach a copy of your most up-to-date CV. Alternatively, please contact Ismail at E3 Recruitment.....Read more...
Panel Beater Up to £24 per hour + bonus Leicester
Ref 306486
We are currently seeking an experienced and skilled Panel Beater to join a busy, professional Accident Repair Centre in the Leicester area.
This is an excellent opportunity to become part of a well-established repair operation where quality workmanship, attention to detail, and customer satisfaction are at the heart of everything they do.
Key Panel Beater Roles and Responsibilities:
- Carry out precise vehicle body repairs using body alignment jigs and specialist equipment.
- Restore damaged panels through expert straightening, reshaping, and filling techniques.
- Remove and replace damaged panels to manufacturer and industry standards.
- Perform welding, bonding, and structural repair work on a wide range of vehicles.
- Identify and record all parts required for repairs, ensuring accuracy throughout the repair process.
- Work efficiently while maintaining the highest standards of quality and safety.
Minimum Requirements as a Panel Beater:
- Time-served Panel Beater or qualified to City & Guilds, NVQ, or equivalent vocational standard.
- ATA accreditation would be advantageous but is not essential.
- Strong attention to detail with the ability to consistently produce high-quality repairs.
- Ability to work effectively both independently and as part of a busy Bodyshop team.
- A positive attitude and commitment to delivering outstanding workmanship.
Benefits:
- Paying up to £24 per hour plus bonus
- Individual bonus available
- Monday to Friday
- fantastic uncapped monthly bonus schemes
- 24 days holiday plus Bank Holidays
- free life assurance
- exclusive employee vehicle-leasing schemes
- pension & save-as-you-earn share scheme
- A Benefits App giving a huge range of retailer discounts and cashback deals
- well-being services
- Permanent Vacancy
If you want to hear more about the Panel Beater role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtautomotive.co.uk to discuss further.....Read more...
Mechanical Maintenance Engineer | £54,000 | Panama Shift Pattern (Days & Nights) | Great Pension | Training & Development
Location: Berkshire
A leading UK manufacturer is seeking a Mechanical Maintenance Engineer to join its highly automated production facility. This is an excellent opportunity for a skilled Mechanical Maintenance Engineer looking to work within a modern manufacturing environment with long-term career prospects.
As a Mechanical Maintenance Engineer, you will be responsible for planned preventative maintenance, reactive maintenance, fault finding and continuous improvement activities across a range of production machinery and automated equipment.
The Role
Carry out mechanical maintenance, fault finding and breakdown repairs.
Complete PPMs on conveyors, mixers, kilns, hydraulics, pneumatics and automated machinery.
Undertake welding, fabrication and mechanical fitting work.
Support reliability, continuous improvement and plant performance projects.
Ensure all maintenance activities are completed safely and in line with site procedures.
Requirements
NVQ Level 3 Mechanical Engineering or equivalent.
Previous experience as a Mechanical Maintenance Engineer, Maintenance Fitter or Mechanical Technician.
Strong mechanical fault-finding and maintenance experience.
Manufacturing, FMCG, industrial or heavy engineering background.
Able to work Panama shifts.
Benefits
£54,000 salary
Generous pension
Ongoing training and development
Modern automated manufacturing site
Strong engineering team and career progression opportunities
If you are a Mechanical Maintenance Engineer looking for a new challenge within a well-established manufacturer, apply today.
....Read more...
Planned and reactive maintenance of commercial and industrial mechanical plant
Maintenance, repair and modification of large HTHW boiler systems and associated heating networks
Pipefitting, fabrication and installation of carbon steel, copper and associated pipework systems
Carrying out pipework modifications, system alterations and upgrades to support site requirements
Welding and fabrication works associated with mechanical installations and repairs
Fault finding and diagnosis of heating and mechanical plant systems
Supporting the delivery of small to medium-sized mechanical projects
Assisting with shutdowns, planned works and heating season preparations
Completing maintenance documentation and ensuring compliance with site procedures
Occasionally undertaking minor plumbing maintenance works where required
Working safely within a secure MOD environment and complying with all health and safety requirements
Training:
Day release at City of Wolverhampton College
The rest of the training will take place within the work place
Training Outcome:
Career progression after apprenticeship will be to gain Commercial Gas experience and qualifications
Employer Description:Midwest Electrical Services Ltd was founded in 1988 by current Board Director Steve Lokucewicz as a small electrical business providing maintenance and project services to a selection of local clients within the West Midlands.
Founded in Wolverhampton the Midwest brand started to grow through providing electrical services to pub chains and local authorities. This service started to expand to the wider reaches of the UK and the direct workforce grew to accommodate this additional workload.Working Hours :Monday- Friday
8.00am- 4.30pmSkills: Communication skills,Team working,Timekeeping,Enthusiasm....Read more...
Performing basic service tasks and developing skills in removal and reconditioning of components
Progressing to perform more complex service and repair tasks, both at the dealership and out in the field
Assisting qualified Technicians as needed
Reporting weekly to a mentor or Service Manager regarding ongoing activities and progression
Maintaining the condition of inventory, tools and equipment
Following all safety rules and regulations
Training:When successful you will be awarded:
Level 2 Land Based Service Engineer qualification
Functional Skills maths & English (if required)
Training is on a residential basis at our dedicated training centre in Nottinghamshire.Training Outcome:As a fully qualified John Deere Turf Technician, you will have access to further development opportunities within the company, extending your skills with additional training in areas such as compressed gas handling, welding, and, abrasive wheels, as well as going on to achieve LTA levels 3 and 4 (Master Technician) qualifications.Employer Description:We are the South West’s leading John Deere dealership, providing premium products and support. Our 3 branches are located in Exebridge (Somerset), Chudleigh (Devon) and St Columb (Cornwall).
We specialise in a high standard of service for sales and product support to all customers whether agricultural, horticultural, leisure or domestic.Working Hours :Monday- Friday between the hours of 8.00am- 6.00pm
Saturday's may be required during busy periods.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Administrative Support
Process enquiries, quotations, and orders
Maintain compliance databases (RISQS, UVDB)
Logistics
Book hotels and flights for Engineers & Technicians
Order and maintain PPE and materials
Quality and Compliance
Maintain Safety, Health, Environmental & Quality
Training:
Apprentices will be allocated a Trainer Assessor and training will be planned and delivered in conjunction with the employer to meetthe individual needs of the apprentice
The apprentice will spend 20% of their working hours in off the job activities and training
On the job and off the job training will be delivered in the workplace
Training Outcome:
The successful candidate will complete a Level 3 Apprenticeship inBusiness Administration, gaining valuable skills and experience in adynamic engineering environment
Employer Description:A.N. Wallis & Co Ltd established in 1946 is a world-leadingmanufacturer of earthing, lightning protection, Cu-nnectexothermic welding and surge protection products. We also offerexpert design services for earthing & lightning systems.Our products are manufactured in Nottingham UK and distributedto customers all over the world, with many being used onextremely prestigious projects.Working Hours :Monday- Thursday
08:00 to 16:30
(60 min lunch)
Friday
08:00 to 15:30
(30 min lunch)Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Logical,Team working,Initiative,Non judgemental,Patience,Proficiency in MS Office,Time management....Read more...
We are looking for a Welder Fabricator to join a respected engineering manufacturer in Bradford on a permanent basis. This is a great opportunity for someone who wants stable day shifts, excellent benefits, and real career progression through structured training and development plans.
What’s on offer for the Welder Fabricator:
Competitive pay: £15.50–£16 per hour, depending on experience
Overtime: 150% during the week, double time from 12 pm Saturday to Sunday evening
20 days holiday + bank holidays + your birthday off
Company pension, sick pay scheme, and death in service benefit
Healthcare plan and personal accident insurance
Free on-site parking
39-hour week: 7:30 am – 4:00 pm with 3 pm finish on Fridays
The Welder Fabricator will work on projects such as:Staircases, mezzanine floors, balustrades, rolled tanks, frameworks, screw feeders, base plates, and hydraulic tanks.
Key responsibilities for the Welder Fabricator:
Operate welding plant and hand tools safely
Work with mild and stainless steel sheet metal, as well as aluminium
Ensure all completed work meets high-quality standards
Follow customer schedules to deliver projects on time
Read and interpret engineering drawings and perform calculations
Maintain high levels of safety and quality at all times
Welder Fabricator skills and experience required:
Skilled in all aspects of sheet metal work, including fabrication, marking, bending, cutting, drilling, forming, and manipulation
Experienced MIG/TIG welder capable of achieving tight tolerances
Comfortable using guillotine, plasma cutter, rollers, and other hand tools
Able to dress and finish surfaces to a high standard
This Welder Fabricator role is based in Bradford with easy access from the motorway. Candidates from a variety of welding backgrounds are welcome to apply.
To apply:For immediate consideration, contact Conor Wood at E3 Recruitment or click “Apply” to arrange an interview and weld test.....Read more...
Specific Responsibilities:
Manufacture one-off and small-batch subcontract components across a range of materials and disciplines
Undertake structured rotations throughout the factory, including Quality, Block-Up & Surfacing, CNC Milling, and Turning, to develop a broad skill set
Maintain a clean, organised, and safe work area at all times
Teamwork & Communication:
Work closely with colleagues, providing assistance and carrying out assigned tasks as required
Liaise with the Cell Leader to identify task priorities, seeking clarification where necessary, and ensure high-priority work is completed first
Confirm all materials, tools, and information are available before starting a task, and promptly notify the Cell Leader of any shortages or issues
Quality, Safety & Compliance:
Demonstrate strong attention to detail with a focus on quality and safety in all tasks
Contribute to a safe working environment and adhere to all Health & Safety legislation and company procedures
Wear and correctly use all provided Personal Protective Equipment (PPE)
Training:
Engineering Technician Level 3
1-day a week at college
Training Outcome:To a full-time role after completing the apprenticeship.Employer Description:Arnold Engineering Plastics who manufacture plastic products, Arnold are capable of 5axis CNC machining of tooling and components in materials aluminium, tooling board, composite materials, Peek along with nylon and plastic machining, welding, fabrication and thermoforming, Arnold have diversified into vacuum forming and lamination it also has an element which do wide format printing and commercial vehicle wrapping. Working Hours :Monday - Thursday, 7:45am - 4:15pm, Friday, 7:45am - 2.45pm.Skills: Attention to detail,Time management,Strong work ethic,Health & safety awareness,Practical....Read more...
Use of CNC’s to produce parts as required.
Use of Manual Machines to produce parts as required.
Use of Welding Machines to produce parts as required.
Issue of raw material to appropriate Works Orders, ensuring that issued materials are booked out correctly on the Progress Plus system.
Receipt of finished goods from production departments, ensuring that the quantities are recorded on the Progress Plus system correctly.
Meet the required personal / department KPI’s, and work towards achieving the companies’ set objectives.
Maintain a clean and safe working environment, ensuring that Health and Safety Policy is adhered to.
Ensure non-conformance reports are raised with the correct level of detail, and the correct procedures are followed or actioned.
To ensure the companies processes are followed in accordance with the Company’s Quality Policy and ISO Management procedures.
To ensure calibration records and reports are kept up to date, and external calibration is organised in a timely manner.
Training:Training to be held onsite and day release at Northampton CollegeTraining Outcome:Qualified CNC Programmer / SetterEmployer Description:Metrol is the UK’s largest manufacturer of gas springs and we are extremely proud to export our quality British engineered and manufactured products around the world. Metrol Springs was established in 1984 to introduce gas springs to the UKmarket. Since our humble beginnings we have grown and diversified into a global business with two strategic divisions; Metrol Tooling and Metrol Motion Control.Working Hours :Monday to Thursday 8:00am to 4:30pm, Friday 7:30am to 3:00pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative....Read more...
Your day-to-day role will include:
Learning the different processes required for window and door manufacturing
Cutting the profile, welding and finishing the products to a high standard
Using hand tools to finish the products to an excellent standard
Working as part of a team in a busy factory environment
Training:You will spend 4 days each week working alongside skilled professionals in the workplace, and 1 day each week completing college work at DCG's Roundhouse campus.Training Outcome:Following the successful completion of this apprenticeship, you could work as a skilled manufacturer and progress to become a supervisor or team leader.Employer Description:Our experts at Glazedale, Nottingham have more than 25 years’ experience in fabricating and installing energy efficient UPVC double glazed windows, doors, conservatories and orangeries in the East Midlands. Every order is made to measure, which ensures the very highest standards of workmanship and means customer can have full confidence in the work we do.
We manufacture all of our energy efficient windows, doors and double glazed units in our Nottinghamshire factory. We use the finest quality products on the market at a competitive price. Above all, because our workers are employed by us we are in control of the process from start to finish which means that customers can rely on us for the best possible service.
Our work is varied from bespoke UPVC windows, doors & conservatories to new build projects. We also have a number of property developers and letting/estate agents that we work with.Working Hours :Monday to Friday, 7.00am to 3.00pm, with a 30 minute lunch break.Skills: Communication skills,Attention to detail,Organisation skills,Presentation skills,Number skills,Logical,Team working,Initiative,Patience....Read more...
£25-30k starting salary, Standard days, Early finish Friday, Perm secure role, On-going training and development to progress career further, Regular salary reviews, Clear progression routes supported by managementWe are looking for a Production Operative for a market-leading, rapidly growing company with a full order book! This company are a leading name in their sector that has a reputation for quality and innovation. The working environment is clean, organised, and they are known for putting their staff at the forefront of everything they do.We’re offering a permanent position for a Production Operative with ongoing training, clear progression routes, clean and modern facilities, and the opportunity to develop skills and build a career in welding and bespoke fabrication.The successful person for the Production Operative role may have experience working as a welder, metal worker, window fabricator, Joiner, Cabinet Maker, bathroom or kitchen fitter, carpenter or worked in roles where you need to measure accurately and be comfortable using hand and power tools.Duties of the Production Operative position
Working on bespoke projects for high-quality vehicle builds
Fabricating plastic vehicle components
Using a range of hand and power tools
Accurately measuring and reading technical drawings
General production operative duties
What's in return for the Production Operative role:
Starting salary of £13.25 - £14.50 with increases after probation and regular salary reviewal.
Fantastic progression routes within company supported by management – training to become a skilled fabricator
Paid overtime at 150%
Clean, modern working environment
No shift work – daytime hours only
Ongoing training and skill development
Alternatively, if you want a private chat about the Production Operative role before submitting your application then please call or email Grace Hudson- Morgan Recruitment.....Read more...
Early finish on a Friday, overtime paid at 150%, job security, ongoing training and development are just a few of the perks that the MIG welder will enjoy whilst working with this rapidly growing manufacturing organisation,Employing over 100 people across Leeds, this market-leading manufacturing organisation offers specialist welding and fabrication services, as well as their own range of bespoke equipment and machinery for the agricultural industry.This organisation is currently experiencing high levels of success and growth and has recently completed an acquisition, which will increase their market share whilst increasing their manufacturing output at their West Yorkshire production facilities.Their LEEDS based facility is based just a few minutes from the M62 and M1 motorways, meaning the successful candidate will easily be able to commute from surrounding towns & cities including Wakefield, Castleford, Pontefract, Bradford, Huddersfield, Halifax, Wetherby, Selby and Barnsley.Ideally, the successful MIG Welder will have
Previous experience working as a MIG Welder or similar title
Previously worked within a manufacturing and engineering environment
The ability to work independently, from engineering drawings and instructions
Previous experience working with a wide range of metals and materials
Working Hours of the MIG Welder
Monday to Thursday: 07:30-16:00
Friday: 07:30-12:00
In return, the successful MIG Welder will receive:
Up to £15 Per Hour.
Early finish on a Friday.
Regular overtime available (paid at 150%).
Holidays begin with 28 days, rising to 33 days per annum.
Ongoing training and development.
To apply for the MIG Welder position, please click “Apply Now” and attach your most up-to date CV. Alternatively please contact Ismail Ahmed at E3 Recruitment for more information.....Read more...
This is an outstanding opportunity for an experienced Operations Manager / Operations Director to lead a well-established manufacturing business supplying bespoke products into some of the UK's most prestigious construction projects. Reporting directly to the Group Managing Director, you'll take full responsibility for the operational and commercial performance of the business whilst helping shape its future growth.
What is in it for you as Operations Director
£75,000 - £80,000 Basic Salary
15% Annual Bonus
Tesla Y Company Car
Company Pension
25 Days Holiday + Bank Holidays
Location – Close the Bath area
The Role of Operations Director
Lead the manufacturing, commercial and operational performance of the business.
Manage the site's P&L, budgets and business objectives.
Develop and lead office, factory and management teams.
Build strong relationships with customers, architects and key stakeholders.
Drive continuous improvement, operational excellence and business growth.
Ensure the highest standards of Health & Safety, quality and customer service.
About You as Operations Director
Applications are welcomed from experienced operational leaders across a broad range of manufacturing sectors. This could include but is not limited to; architectural products, fabrication/welding, design and build, construction materials, precast concrete, brick and block, fabrication, timber construction, joinery, modular construction, fit-out, specialist building products or other related manufacturing environments.
You'll have experience leading manufacturing operations, managing budgets and P&L, developing high-performing teams and driving business performance. Strong commercial awareness, customer-facing experience and the ability to lead change are essential, as either an Operations Manager, Operations Director, General Manager, Managing Director, etc
This is an excellent opportunity to join a respected and growing business in a key leadership role, offering genuine autonomy and the chance to influence the future direction of the company.
Location: Bath, Somerset (commutable from Bristol, Frome, Wells, Trowbridge, Chippenham and surrounding areas).
If of interest, please apply now....Read more...
General purpose:
The Apprentice Sheet Metal Fabricator will spend time within the sheet metal fabrication cell and will learn about processes and procedures.
The apprentice will operate within the mandatory customer and internal specifications and inspect products accordingly. The Apprentice Sheet Metal Fabricator will learn how to effectively and safely use fly presses, brake presses, waterjet and welding.
Key deliverables:
Manufacture aerospace components according to procedures and instructions provided
Setting and operating machinery used in the manufacture of sheet metal components
Learning and efficiently operating hand tools, deburring tools, drills, fly presses
Learning and efficiently operating TIG welders, spot welders
Learning and efficiently operating waterjet
Verify the conformity of parts, assemblies and sub-assemblies in line with engineering drawings, the quality management system and any special customer requirements
Identify and report non-conformance as per the company procedure
Ensure compliance with Quality Assurance and Health Safety Environment policies and procedures
Training:
Level 2 Engineering Operative
Skills, Knowledge and Behaviours
Day release to attend New City College, Rainham campus (RM13 8GP)
Training Outcome:
Upon successful completion of the apprenticeship, various opportunities could be available, depending upon the needs of the company at that time
Employer Description:Xcel Aerospace is a leader in delivering manufacturing excellence within the global aerospace market. We provide high quality components and assembly parts and our strong reputation as a world class supplier of manufactured aerospace components supports thousands of fight hours every year.Working Hours :Monday - Thursday, 8.00am - 1.00pm (30 minute lunch break)
Friday, 8.00am - 1.00pm.Skills: Good numerical skills,Able to measure calculations,Good verbal communicator,Good writing skills,Team working skills,Able to use own initiative,Able to work to time scales,Promote quality standards,Good organisational skills,Ability to prioritise work,Display a positive attitude,Enthusiastic learner,Eager to learn....Read more...
£25-30k, Standard days, Early finish Friday, Perm secure role, On-going training and development to progress career further, Regular salary reviews, Clear progression routes supported by managementWe are looking for a Assembly Fitter for a market-leading, rapidly growing company with a full order book! This company are a leading name in their sector that has a reputation for quality and innovation. The working environment is clean, organised, and they are known for putting their staff at the forefront of everything they do.We’re offering a permanent position for a Assembly Fitter with ongoing training, clear progression routes, clean and modern facilities, and the opportunity to develop skills and build a career in welding and bespoke fabrication.The successful person for the Assembly Fitter role may have experience working as a welder, metal worker, window fabricator, Joiner, Cabinet Maker, bathroom or kitchen fitter, carpenter or worked in roles where you need to measure accurately and be comfortable using hand and power tools.Duties of the Assembly Fitter position
Working on bespoke projects for high-quality vehicle builds
Fabricating plastic vehicle components
Using a range of hand and power tools
Accurately measuring and reading technical drawings
General assembler fitter duties
What's in return for the Assembly Fitter role:
Starting salary of £13.25 - £14.50 with increases after probation and regular salary reviews.
Fantastic progression routes within company supported by management – training to become a skilled fabricator
Paid overtime at 150%
Clean, modern working environment
No shift work – daytime hours only
Ongoing training and skill development
Alternatively, if you want a private chat about the Assembly Fitter role before submitting your application then please call or email Grace Hudson- Morgan Recruitment.....Read more...
As part of your role, you will:
Manufacture, assemble and maintain high-precision injection mould tools
Operate and programme CNC milling and turning machines
Work with wire erosion and spark erosion (EDM) technologies
Use manual machines including milling machines, lathes and grinders
Carry out tool modifications, repairs and fault finding
Support CAM programming and machining strategy development
Assist with CAD/design processes and engineering drawings
Work with hot runner systems, wiring and diagnostics
Carry out laser welding and finishing processes
Inspect and ensure components meet tight tolerances and quality standards
Contribute to continuous improvement and process optimisation
Maintain a safe, organised and professional workshop environment
Training:Day release training at Oaklands College - Welwyn Garden City Campus
You will complete a Level 4 Engineering Manufacturing Technician Apprenticeship, which may include:
Advanced machining principles (CNC & manual)
CAD/CAM and engineering design fundamentals
Manufacturing processes and materials science
Quality assurance and inspection techniques
Problem-solving and fault-finding in engineering systems
Health, safety, and engineering standards
Training will combine on-the-job learning with off-the-job study, potentially leading to a Higher National Certificate (HNC) or equivalent qualification
Training Outcome:Upon successful completion, you could progress into roles such as:
Advanced Toolmaker / Senior Toolmaker
CNC Programmer / Manufacturing Engineer
Toolroom Supervisor or Technical Specialist
This apprenticeship provides a strong foundation for a long-term, high-level engineering career.Employer Description:At Neptune Injection Ltd, part of Neptune Engineering, we have built a strong reputation for quality, innovation, and flexibility. With over 50 years of combined experience, we are proud to be one of the UK’s leading specialists in injection moulding and mould tooling.Working Hours :Monday - Thursday, 08:00 - 17:00 and Friday, 08:00 - 16:00
Optional overtime available.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
