We are seeking an experienced Test Engineer to work alongside Senior Test Engineers and the Test Manager at space thruster test facilities.
Key Responsibilities:
Supporting site preparation, fuel handling, pressure systems, and instrumentation.
Lead the coordination and planning of test activities, including building new test facilities and test procedures.
Provide in-depth knowledge of space thruster theory, liquid propellant and high-pressure gas systems
Key Requirements:
Mechanical fitting or practical engineering skills (preferably gained through an apprenticeship or engineering-related organization).
A positive attitude with a willingness to learn and develop.
Ideally qualified to graduate level in a related engineering discipline.
Proficient in analysing test data and preparing detailed reports.
Excellent problem-solving skills and a logical approach to tasks.
Working with high-pressure gas systems and outdoor conditions....Read more...
We are seeking an experienced Test Engineer to work alongside Senior Test Engineers and the Test Manager at space thruster test facilities.
Key Responsibilities:
Supporting site preparation, fuel handling, pressure systems, and instrumentation.
Lead the coordination and planning of test activities, including building new test facilities and test procedures.
Provide in-depth knowledge of space thruster theory, liquid propellant and high-pressure gas systems
Key Requirements:
Mechanical fitting or practical engineering skills (preferably gained through an apprenticeship or engineering-related organization).
A positive attitude with a willingness to learn and develop.
Ideally qualified to graduate level in a related engineering discipline.
Proficient in analysing test data and preparing detailed reports.
Excellent problem-solving skills and a logical approach to tasks.
Working with high-pressure gas systems and outdoor conditions....Read more...
An exciting opportunity has arisen for an Engineering Test Technician to join a leading electronics company based in Clacton on Sea, Essex.
The successful Engineering Test Technician based in Clacton on Sea, Essex, will report to the Engineering Test Manager and play a crucial role in testing, maintaining, and calibrating a wide range of electronic products and equipment to the highest standards, including compliance with UKAS requirements. This hands-on role also supports senior engineers on complex testing and development projects.
Key Responsibilities of the Engineering Test Technician based in Clacton on Sea, Essex,:
Conduct technical tests and investigations on both new and legacy products using a range of equipment, including: Vector Network Analysers, Oscilloscopes, High Voltage Power Supplies, Digital Multimeters (DMMs), and more.
Prepare detailed test reports and maintain well-organised test result archives.
Collaborate with engineering and production teams to troubleshoot and resolve test-related issues.
Perform soldering tasks for cables and connectors and assist with fault diagnosis down to component level.
Manage the calibration of all departmental test equipment to UKAS standards, including liaising with external calibration providers and maintaining accurate calibration records.
The ideal Engineering Test Technician based in Clacton on Sea, Essex will have:
A BTEC Level 3, A Levels, or equivalent in an engineering discipline with a focus on electronics.
Proven experience using test equipment such as oscilloscopes, DMMs, and network analysers.
Hands-on experience in electronics fault-finding and test.
Basic programming experience, ideally with C++ in Visual Studio, for test automation purposes.
A strong understanding of electronic principles and a practical, problem-solving mindset.
This is a fantastic opportunity to grow within a supportive engineering environment, working on high-performance products used across a wide range of applications. A competitive salary and opportunities for further technical development are offered.
APPLY NOW for the Engineering Test Technician role based in Clacton on Sea, Essex, by sending your CV and cover letter to ltemple@redlinegroup.Com or call Lewis on 01582878820.....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route c....Read more...
An exciting opportunity has arisen for a Mechanical Development Engineer to join my client, a leading global business operating in Coding and Marking solutions, in Cambridgeshire.
The ideal Mechanical Development Engineer, based in Cambridgeshire, will report into the Engineering Manager and will be responsible for designing and developing mechanical hardware solutions for the New Product Development (NPD) team. This is both a hands-on and theoretical role. Key responsibilities will include:
Design, develop and build test equipment and test rigs to support validation and verification (V&V) activities.
Define and document System Level Hardware Specifications, ensuring compliance with safety, performance, and regulatory standards.
Perform V&V testing, including system-level validation, prototyping, debugging, and performance modelling.
Collaborate with cross-functional teams, including Mechanical, Electrical, Physics, Chemistry, and Software engineers, to drive product development and successful project delivery.
Create detailed technical documentation, high-quality reports and comprehensive Test Plans.
Participate and Contribute to FMEA’s, Design Reviews and Product definitions.
The successful Mechanical Development Engineer, based in Cambridgeshire will have:
Strong knowledge of mechanical engineering principles, Fluid Systems, System Integration, and problem-solving methodologies.
Proficiency in CAD tools (Creo) for mechanical design, integrating mechanical components with broader hardware systems.
Hands on Engineering Experience with mechanical manufacturing techniques and processes (Milling, Lathe… etc)
This role is based in Cambridgeshire on a hybrid basis (4 days at the office, 1 day at home).
APPLY NOW for the Mechanical Development Engineer, based in Cambridgeshire job by sending your CV to Blongden@redlinegroup.Com or call Brett on 01582 878841 or 07961 158773, if you have any specific questions about this role, otherwise we always welcome the opportunity to discuss other engineering jobs.....Read more...
A growing medical devices company in Cambridge are searching for an experienced research and development test engineer to join their in-house testing team.
As a Mechanical Test Engineer within this organisation, you will be utilising your experience to determine the performance and reliability of brand-new physical products within the medical devices sector.
You will be charged with building prototypes and designing and running experiments to gather performance data on new products as well as created novel test methods and protocols. You will be working closely with the laboratory manager to help push the team forward with new ideas.
It will be your role to ensure that exciting new breakthrough products can make the successful transition from initial concept to verification and manufacturing. This will be done by creating bespoke prototypes and testing programmes which will provide detailed data and insights that can be translated into real-world improvements.
To be considered for this role, we are ideally looking for a candidate who has the following;
Experience of mechanical testing on physical products with knowledge of force testing equipment.
Working knowledge of LabView or basic python programming experience.
A methodical and structured approach to solving problems
The company are offering tailored packages for the right engineer which includes a series of benefits including performance bonuses, free lunches and breakfasts and competitive pension plan.
If you would like to find out more about this opportunity, make an application now and one of our team will be in touch to discuss it further.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
The apprentice Paint Refinisher to train/work alongside existing skilled staff in the Paint department reporting to the workshop controller or depot manager daily.
In addition to training and assisting in the paint department you will carry out general housekeeping duties.
You will mainly work with a chosen mentor in the paint department with duties to include:
Preparation - stripping, sanding and masking
Etching and priming areas to be treated
Colour matching and mixing
Paint application techniques including spray booth technology
Buffing and polishing methods
Paint defect corrections
Training:Vehicle Damage Paint Technician Level 3 Apprentice Standard.
End Point Assessment:
Knowledge Test (90-mins)
Professional Discussion (45-mins)
Practical Skills Test (11-hours over 2 consecutive days)
Attend Sheffield College - Olive Grove Campus 1 day per week in term time.Training Outcome:The possibility of a full-time role.Employer Description:Mon-Fri
8.30-5.00pmWorking Hours :Monday - Friday, 8.30am - 5.00pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Logical,Team working,Creative,Non judgemental,Patience,Physical fitness....Read more...
An exciting opportunity has arisen for a Field Based Technical Regional Sales Manager to join a leading global provider of audio and acoustic test instrumentation, based in the United Kingdom
The successful Field Based Technical Regional Sales Manager based in the United Kingdom will play a key role in growing business and supporting customers across the UK and Ireland for industry-leading measurement solutions in sound, vibration, and audio analysis.
Key Responsibilities:
Sales & Business Development – Identify and develop new opportunities across key sectors including automotive, aerospace, defence, and consumer electronics.
Technical Consultation – Provide expert advice to engineers, technicians, and researchers, helping them find the best measurement solutions for their applications.
Product Demonstrations & Training – Deliver on-site and virtual demonstrations, as well as customer training, for audio and acoustic systems.
Account Management – Build and maintain strong relationships with existing clients, ensuring high levels of satisfaction and retention.
Market Expansion – Create and execute strategic sales plans to increase product visibility and market share.
Travel – Regular travel within the UK and Ireland to meet with customers and attend industry events.
The ideal Field Based Technical Regional Sales Manager will have:
Experience in the Test & Measurement sector, ideally with a focus on audio and/or acoustics.
A passion for engineering, and the ability to discuss complex technical solutions with confidence.
Strong communication skills and the ability to engage with stakeholders at all levels.
A proactive and self-motivated attitude, with a desire to achieve and exceed sales targets.
A full UK driving licence and willingness to travel extensively.
A degree in engineering or a related field is desirable, although not essential.
Recent graduates are welcome to apply.
In return, you will receive a competitive salary, target-based commission, pension contributions, and the opportunity to work with world-leading technologies in a collaborative and supportive environment.
APPLY NOW for the Field Based Technical Regional Sales Manager based in the United Kingdom role by sending your CV and cover letter to ltemple@redlinegroup.com or call on 07961158785....Read more...
We are looking for a hands-on Engineering Manager to lead a talented, multi-disciplinary team of electronics, firmware, and software test engineers.
You’ll drive project ownership, coordinate technical efforts, and grow a high-performing team that delivers world-class audio products from concept to production. Your leadership will inspire innovation and ensure smooth collaboration across teams and stakeholders.
Key Skills:
Degree or Master in Electronics or related STEM field
Five years in senior electronics roles with proven team management experience
Strong skills in system architecture, PCB design (Altium preferred), and mixed-signal electronics
Experience managing complex, cross-functional projects and presenting to executives
Inspirational leadership and excellent communication skills....Read more...
AA Euro Group is actively recruiting for a HVAC Lead to join a client of ours delivering a state of the art pharmaceutical facility just outside of Oxford.Reporting to the Mep Manager, the HVAC Lead is responsible for overseeing the installation, maintenance, and repair of heating, ventilation, and air conditioning (HVAC) systems in residential, commercial, or industrial settings.This role combines technical expertise with leadership skills to ensure projects are completed efficiently, safely, and in compliance with industry standards.Responsibilities
Supervise and perform the installation of HVAC systems, including ductwork, piping, and related components.Diagnose and repair HVAC system issues to ensure optimal performance.Conduct routine maintenance to prevent system malfunctions.Inspect work performed by team members to ensure adherence to specifications and safety standards.Test and verify system functionality using specialized tools and equipment.Recommend and implement system improvements and energy-efficient upgrades.Integrate modern controls and automation systems when applicable.Maintain accurate records of work performed, materials used, and hours worked.Order necessary equipment and supplies for projects.Prepare reports on project progress, system performance, and team productivity.Chairing meetings with sub-contractors.Health and safetyQuality checks QA QC familiar with ITP & ITR’s( Inspection test plans & Inspection test records).Progress Schedule updates. Report to the planner.Tech sub reviews for sign off against specificationsRAMS reviews High risk lifts(Crane) and installations at height.Delivery of capital plantUnderstanding typical codes such as DW143,144L2 pressure testing of AHU’sTR19 duct cleaning
Experience
6+ years of hands-on experience in HVAC installation, repair, and maintenance.2+ years in a leadership or supervisory role.Strong understanding of HVAC systems, controls, and energy-efficient technologies.Proficient in reading blueprints, schematics, and technical manuals.Excellent problem-solving and decision-making abilities.Strong communication and interpersonal skills.Proficiency in HVAC software and tools (e.g., HVAC load calculation tools, CMMS).Able to work in isolation and as a teamAble to give clear instruction to others within the team.Comfortable with working away if required
Qualifications
Diploma or equivalent; a technical degree in HVAC or related field is preferred.Certified HVAC Technician (EPA 608 Certification required; NATE certification preferred).
INDWC....Read more...
AA Euro Group is actively recruiting for a HVAC Lead to join a client of ours delivering a state of the art pharmaceutical facility just outside of Oxford.Reporting to the Mep Manager, the HVAC Lead is responsible for overseeing the installation, maintenance, and repair of heating, ventilation, and air conditioning (HVAC) systems in residential, commercial, or industrial settings.This role combines technical expertise with leadership skills to ensure projects are completed efficiently, safely, and in compliance with industry standards.Responsibilities
Supervise and perform the installation of HVAC systems, including ductwork, piping, and related components.Diagnose and repair HVAC system issues to ensure optimal performance.Conduct routine maintenance to prevent system malfunctions.Inspect work performed by team members to ensure adherence to specifications and safety standards.Test and verify system functionality using specialized tools and equipment.Recommend and implement system improvements and energy-efficient upgrades.Integrate modern controls and automation systems when applicable.Maintain accurate records of work performed, materials used, and hours worked.Order necessary equipment and supplies for projects.Prepare reports on project progress, system performance, and team productivity.Chairing meetings with sub-contractors.Health and safetyQuality checks QA QC familiar with ITP & ITR’s( Inspection test plans & Inspection test records).Progress Schedule updates. Report to the planner.Tech sub reviews for sign off against specificationsRAMS reviews High risk lifts(Crane) and installations at height.Delivery of capital plantUnderstanding typical codes such as DW143,144L2 pressure testing of AHU’sTR19 duct cleaning
Experience
6+ years of hands-on experience in HVAC installation, repair, and maintenance.2+ years in a leadership or supervisory role.Strong understanding of HVAC systems, controls, and energy-efficient technologies.Proficient in reading blueprints, schematics, and technical manuals.Excellent problem-solving and decision-making abilities.Strong communication and interpersonal skills.Proficiency in HVAC software and tools (e.g., HVAC load calculation tools, CMMS).Able to work in isolation and as a teamAble to give clear instruction to others within the team.Comfortable with working away if required
Qualifications
Diploma or equivalent; a technical degree in HVAC or related field is preferred.Certified HVAC Technician (EPA 608 Certification required; NATE certification preferred).
INDWC....Read more...
An exciting opportunity has arisen for a Production Engineer, to join an Electronics manufacturing business in Buckinghamshire.
The successful Production Engineer, based in Buckinghamshire, will report into the Production Engineering Manager.
Key Responsibilities:
Design work procedures and issue work instructions.
Review printed circuit board (PCB) designs from clients in the form Gerber and SMT pick-and-place files and convert them to production instructions.
Design and build test jigs for production. Build wiring harnesses for programming devices.
Trouble-shoot production issues.
Liaise with product designers when necessary.
The Production Engineer, based in Buckinghamshire, will have Production experience in electronics manufacture and an understanding of electronic circuits to component level. You will also have experience of GC-Powerplace or equivalent.
APPLY NOW for the Production Engineer, based in Buckinghamshire, by sending your CV and cover letter to LTemple@reldinegroup.Com or contact us on 01582878820.....Read more...
What you will do at work as an apprentice (bullet points)
Assemble, test, and document all products and sub-assemblies for production ready for shipment to customer
Ensure all product is built and tested according to the documented procedures, and all documents are completed and stored correctly
Inspect kitted parts and materials for workmanship standard, and quality compliance
Perform final integration and testing of products based on instructions, as well as hi-pot and leakage testing before final shipping
As needed fault find products, reject components, and assist with reworks
Pack products into boxes for stocking, making sure they meet customer requirements of quality
Support Lean, Health and Safety and continuous improvement Initiatives
Provide support and feedback to production team lead, production technical support, operations manager, R&D team as needed
Working with the production scheduler, self-manage time and priorities to meet production output/customer requirements
Keep work area and tools, organised, clean and safe
Attributes
Must have basic ability but will be trained on:
Electro-mechanical assembly
Use of electronic measurement and test equipment
Use of common shop tools, and mechanical measuring equipment
Soldering of PCBA wiring and components, on surface mount and through hole
Training:
Training will take place weekly (term time) at a Truro-Penwith College campus
Training Outcome:
On completion of a successful apprenticeship, there may be an opportunity for a full-time position
Employer Description:Partech is part of In-Situ Inc. operating worldwide. We design and manufacture water quality monitoring and analysis sensors and instrumentation. We also provide service / repair and technical support for our products including customer on site servicesWorking Hours :Working Days: Monday through Friday.
Working Times: Monday - Thursday, 08:30 - 17:00. Friday, 08:30 - 12:30.
Overtime maybe required on occasions
Travel to customer sites and other in-situ sites may also be required on occasions.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Good time keeping....Read more...
Are you an experienced lab and data centre professional with a passion for satellite communications and cutting-edge tech? Were looking for a Satcom Lab Manager to take ownership of a state-of-the-art satellite communications lab and play a key role in supporting mission-critical projects.
As Satcom Lab Manager, youll oversee the design, maintenance, and operation of the satellite communications lab and supporting data centre. Youll work closely with cross-functional teams, manage RF and network testing infrastructure, and ensure the environment is safe, efficient, and future-ready.
This is a hands-on role ideal for someone who thrives in a fast-paced technical environment and enjoys solving real-world engineering challenges.
What Youll Do
- Manage the day-to-day operations of a 60-cabinet data centre and RF lab
- Install, calibrate, and maintain RF and networking equipment
- Support satellite terminal testing (OTA and via simulators)
- Collaborate with engineering teams to resolve lab issues and prioritise projects
- Maintain documentation and update lab management tools like Patch Manager
- Lead lab audits, safety protocols, and equipment coordination
- Provide technical support across networking, server infrastructure, and RF systems
What Youll Need
- Bachelors degree in IT, engineering, or a related field
- 5+ years of experience in IT infrastructure, lab, or data centre management
- Knowledge of RF/VSAT systems, network configuration, and fault resolution
- Experience with Linux, VMware, and cloud systems (e.g., AWS)
- Familiarity with lab automation tools and DCIM platforms
- Excellent problem-solving, communication, and coordination skills
- Must be a UK citizen or have permanent residency
Bonus Points For
- Experience with RF test equipment and VSAT installations
- Cisco or Juniper certifications (CCNA/CCNP/JUNOS)
- Strong logistical skills, especially around hardware installations and customer demos
This is a fantastic opportunity to join a forward-thinking team working on globally impactful satcom technology. If you're ready to take the lead in a hands-on technical environment, wed love to hear from you.
Apply now and help shape the future of global connectivity.....Read more...
During your time at Isocom you can expect to work within the engineering and production areas.
Your main duties include:
Work alongside the Technical Manager to gain experience and knowledge of electronic equipment and projects.
Working with our Design Engineers to build and test prototypes of new products.
Supporting the preparation of component test programmes.
Maintaining and supporting the production machinery, jigs and tooling.
Participate in component assembling in clean room as required.
Participate in internal projects.
Ensure quality, housekeeping and hygiene standards are maintained, and at AS9100 quality standards for aerospace and space applications at all times.
Ensure all duties are carried out in accordance with Company’s H&S policy.
Use all PPE as instructed.
Maintain a safe working environment at all times.
Report any serious malfunctions or risks to Supervisor.
Training:Apprentices will be permitted to attend college one day per week during term time.
The rest of the training will take place on site at the main premises, during business hours.
Apprentices will gain a Level 3 Diploma in Advanced Manufacturing and Engineering - Mechatronics Maintenance Technician at the end of the apprenticeship.Training Outcome:Full-time permanent employment available upon successful completion of apprenticeship.Employer Description:Isocom specialise in the design, manufacture, and testing of high-quality optoelectronic and microelectronic components for space, defence, aerospace industries, as well as supplying parts to the medical, communications and industrial sectors.
With over 35 years of experience, our knowledge, skills and expertise are unrivalled in the marketplace and have allowed us to be a part of some incredible projects.
Our products are sold worldwide, we have distributions channels working across the globe to help customers source specifications for optoelectronics and microelectronics.
We are classed as an SME but we are looking to expand significantly as demand for our products increase and we continue to recruit, train, develop and build our already highly skilled team.Working Hours :Monday to Thursday 9:00am - 5:00pm.
Friday, 9:00am - 3:00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
R&D Project Manager – Machine Learning – Cambridge
Are you an experienced engineer who is looking for a new role within a fun, fast-paced commercial environment? A small, tight knit team in rural Cambridgeshire are looking for passionate machine learning specialists to join their award-winning team of engineers and programmers.
This exciting new role will give the Project Manager an excellent opportunity to work on some really exciting and cutting edge products within the machine learning field. As this is a relatively small team you will need to take a hands-on approach and lead a team of fellow scientists and engineers. This will give you the opportunity to thrive within one of the fastest growing sectors within technology.
On a day to day basis you will use your skills and expertise to develop and test new technologies around optimisation, pattern recognition and forecasting to improve efficiency of energy solutions and distribution.
To be considered for this exciting role you will need to have a degree in Computer Science, Electronics or relevant field as well as experience with either machine learning or deep learning. You will also need to have a genuine passion for this sector and a relevant PhD and post-doc experience would be highly advantageous.
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing excellent career progression. The company also offer excellent training to further develop your skills.
For more information, please call Matthew Lowdon of Newton Colmore Consulting on 0121 268 2240 or make an application and one of our team will be in touch.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Key words: Computer Science, Software Engineer, Electronics, Computer Vision, Deep Learning, Machine Learning, Image Processing, Cambridge
....Read more...
Salesforce Project Manager – Salesforce – Birmingham
Salary – Up to 65k
Birmingham – 3 days per week
Our client is seeking a highly skilled Project Manager with a professional services background to join their dynamic IT team. In this role, you will manage and deliver predominantly business change projects within time and cost constraints with a main focus on delivering Salesforce solutions. The ideal candidate will have a proven track record in managing business change projects/Salesforce projects within a professional services environment, demonstrating strong leadership, organisational, and communication skills.
Key skills:
Strong Project Management experience
Ability to achieve project buy in and co-operation
Identify, initiate and maintain project RAIDs
Develop strategies and measure to mitigate and control risk
Previously managed business change programmes of work
Experience of end-to-end project management
Stakeholder Coordination – Effectively liaising with business stakeholders, IT team members, third-party suppliers, clients, and others to ensure successful project delivery.
Project Leadership – Managing work breakdown structures, creating estimates, developing project and technical plans, overseeing finances, risks, contingencies, scope, and change control.
Comprehensive Documentation – Preparing key project management documents including Project Initiation Documents (PID), status reports, change control notes, Business Cases, Business Requirement Specifications (BRS), test plans, and other essential documentation.
Business Requirements – Clearly defining business requirements, processes, delivery plans, and benefit cases for various programs of work.
Third-Party Management – Identifying, contracting, and managing third parties to deliver necessary solutions* Managing project plans and budgets
Interested? Please submit your updated CV to Emma Siwicki at Crimson for immediate consideration.
Not interested? Do you know someone who might be a perfect fit for this role?
Refer a friend and earn £250 worth of vouchers! Crimson is acting as an employment agency regarding this vacancy
Crimson is acting as an employment agency regarding this vacancy....Read more...
Log referrals onto patients’ EMIS records and via “e-referrals” or other secondary care referral systems.
Ensure that correspondence is signed and sent out promptly or electronically attached.
Keep files of data and correspondence as necessary and, in doing so, help maintain the administrative filing system.
Update patients’ computer records by entering new information (e.g. new problem codes, home visit details etc. as dictated by G.P.’s) onto the EMIS computer system as appropriate.
Deal with enquiries about referrals and other follow-up care from patients (either on the telephone or in person), hospitals and other health professionals.
Obtain information requested by the doctors (e.g. hospital speciality waiting times, chasing of diagnostic test results, availability of specialists at various hospitals).
Assist patients by giving helpful information and advice as appropriate and within the remit of your role as medical secretary.
Assist with cover for medical secretary colleagues during sickness/holiday absence.
Any other tasks as detailed by the Doctors, Business Manager or Office Manager.
Training:Delivery to be completed on-site and off-the-job training either at Barnsley College or your place of work. Student to complete a Customer Service Practitioner Level 2 Apprenticeship. Training Outcome:Initial responsibilities will be centred around the receipt of, scanning and processing of documentation from external clinical providers, onto the clinical system. When comfortable with this function, there will be the opportunity to train in all Medical Secretary responsibilities e.g. Audio and copy type referral letters and other correspondence for the clinical and senior management teams.Employer Description:We are a group of GP surgeries across Penistone, Thurgoland and Silkstone. We are the second largest GP Practice in Barnsley. The role of Medical Secretary will be based at our Thurgoland branch in a team of 5.Working Hours :Monday – Friday 8.00 – 14.00Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Team working,Initiative,Non judgemental,Patience....Read more...
My client are a global financial services firm with hubs scattered across the USA and EMEA. Due to a planned expansion and internal promotion, we are seeking to appoint a Senior Internal Auditor to join the London team.
Key responsibilities will include:
Participating in internal audits designed to evaluate the adequacy of controls for the business and key business processes. This is an end to end internal audit role.
Included in this responsibility are:
Completing audit test procedures.
Communicating audit findings noted from the review to the Senior Internal Audit Manager.
Assisting the Senior Internal Audit Manager in the development of an audit approach and testing strategy for assigned audit projects to ensure all key business risks and controls are evaluated.
Making, or assisting in making oral and written presentations to management throughout and at the conclusion of the examination by discussing process and control deficiencies, recommending corrective actions and other suggestions for improvements in operations and/or reductions in costs.
Applicants will be able to deliver an end to end internal audit but this can be whilst under supervision from the Senior Internal Audit Manager.
The company culture for this client is extremely dynamic and ambitious candidates are well looked after. 75% of the current leadership team have been internally promoted into the role and other senior operational Line Managers also originated from within internal audit. It has an excellent reputation for getting strong candidates noticed and then poached into group operational roles.
Applicants will ideally be qualified or studying towards one of the following: ACA/ACCA/CIIA/CIA or equivalent.
Communication skills and particularly the ability to articulate risks and controls are essential for this role. A good work/life balance exists and the team operate a “grown up approach” to time keeping with core hours being 9.30-5.30pm. The team work in a hybrid manner with 2 days a week in the office and the rest from home.
Applications are welcome from internal auditors seeking a move or external auditors who have been working on a financial services portfolio seeking to make their first move into industry. These candidates must be able to identify and articulate risk.
For more information, please click to apply.....Read more...
JOB DESCRIPTION
Summary:
Carboline Global Inc. is looking for a Warehouse Associate to assist with Shipping/Receiving of Finished Goods, Tinting of Base Product to Customer Required Color and assisting the Service Center Manager in accomplishing Service Center goals.
Minimum Requirements:
High School Diploma or equivalent
1 year of Warehouse experience
Must either have a forklift certification or pass forklift certification test.
Must pass a color blindness test.
Physical Requirements:
The employee frequently is required to stand, walk, stoop, kneel, crouch, or crawl. Any function may be performed for up to four hours with no breaks. Operate various warehouse equipment including a forklift, pallet jack, and stock picker.
Essential Functions:
Assist with freight loading, unloading, shipping, and receiving on appropriate trailers.
Assist in warehouse inventory, checking in merchandise, matching purchase orders to sales orders, and distributing to sales associates for processing.
Read customer orders to determine what needs to be pulled, wrapped, and placed in proper shipping lanes. According to shipper delivery process.
Receive and stock materials or items according to predetermined sequence such as size, type, style, color, or product code.
Record amounts of materials or items received or distributed via the appropriate computer program.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online!....Read more...
An established optical group is now looking for an Optometrist to join their experienced team in Chester.Recently refurbished in the latest contemporary-yet-comfortable style, this highly rated practice uses longer 45-minute test times and advanced clinical technology, including OCT and UWF retinal imaging system, to provide in-depth patient care to both adults and children.Supported by the Practice Manager and long-standing team, you’ll be well-equipped to build lasting patient relationships and provide exceptional tailored service each and every time.From day one you’ll be supported with your continued professional development, including CET training and accommodations for further education.This is a permanent, part-time role for an Optometrist.Person specification:
(Essential) GOC-accredited Optometry degree (BSc Optometry, BOptom or equivalent/higher)(Essential) Registration with the GOC as an Optometrist(Essential) 3 years’ post-qualification experience working as an Optometrist
Benefits/enhancements include:
Regular CET training, funded professional development, support for further educationPaid professional fees (GOC and professional indemnity insurance)5 weeks’ annual leave plus bank holidays and birthday off (pro rata if part-time)Company pension schemeCycle to work schemeSimplyhealth planAccess to My Work/Life Solutions (discounts and financial wellbeing platform)Family & friends discountsAnd more!....Read more...
An established optical group is now looking for an Optometrist to join their experienced team in Chester.Recently refurbished in the latest contemporary-yet-comfortable style, this highly rated practice uses longer 45-minute test times and advanced clinical technology, including OCT and UWF retinal imaging system, to provide in-depth patient care to both adults and children.Supported by the Practice Manager and long-standing team, you’ll be well-equipped to build lasting patient relationships and provide exceptional tailored service each and every time.From day one you’ll be supported with your continued professional development, including CET training and accommodations for further education.This is a permanent, part-time role for an Optometrist.Person specification:
(Essential) GOC-accredited Optometry degree (BSc Optometry, BOptom or equivalent/higher)(Essential) Registration with the GOC as an Optometrist(Essential) 3 years’ post-qualification experience working as an Optometrist
Benefits/enhancements include:
Regular CET training, funded professional development, support for further educationPaid professional fees (GOC and professional indemnity insurance)5 weeks’ annual leave plus bank holidays and birthday off (pro rata if part-time)Company pension schemeCycle to work schemeSimplyhealth planAccess to My Work/Life Solutions (discounts and financial wellbeing platform)Family & friends discountsAnd more!....Read more...
An established optical group is now looking for an Optometrist to join their experienced team in Chester.Recently refurbished in the latest contemporary-yet-comfortable style, this highly rated practice uses longer 45-minute test times and advanced clinical technology, including OCT and UWF retinal imaging system, to provide in-depth patient care to both adults and children.Supported by the Practice Manager and long-standing team, you’ll be well-equipped to build lasting patient relationships and provide exceptional tailored service each and every time.From day one you’ll be supported with your continued professional development, including CET training and accommodations for further education.This is a permanent, part-time role for an Optometrist.Person specification:
(Essential) GOC-accredited Optometry degree (BSc Optometry, BOptom or equivalent/higher)(Essential) Registration with the GOC as an Optometrist(Essential) 3 years’ post-qualification experience working as an Optometrist
Benefits/enhancements include:
Regular CET training, funded professional development, support for further educationPaid professional fees (GOC and professional indemnity insurance)5 weeks’ annual leave plus bank holidays and birthday off (pro rata if part-time)Company pension schemeCycle to work schemeSimplyhealth planAccess to My Work/Life Solutions (discounts and financial wellbeing platform)Family & friends discountsAnd more!....Read more...
An established optical group is now looking for an Optometrist to join their experienced team in Chester.Recently refurbished in the latest contemporary-yet-comfortable style, this highly rated practice uses longer 45-minute test times and advanced clinical technology, including OCT and UWF retinal imaging system, to provide in-depth patient care to both adults and children.Supported by the Practice Manager and long-standing team, you’ll be well-equipped to build lasting patient relationships and provide exceptional tailored service each and every time.From day one you’ll be supported with your continued professional development, including CET training and accommodations for further education.This is a permanent, part-time role for an Optometrist.Person specification:
(Essential) GOC-accredited Optometry degree (BSc Optometry, BOptom or equivalent/higher)(Essential) Registration with the GOC as an Optometrist(Essential) 3 years’ post-qualification experience working as an Optometrist
Benefits/enhancements include:
Regular CET training, funded professional development, support for further educationPaid professional fees (GOC and professional indemnity insurance)5 weeks’ annual leave plus bank holidays and birthday off (pro rata if part-time)Company pension schemeCycle to work schemeSimplyhealth planAccess to My Work/Life Solutions (discounts and financial wellbeing platform)Family & friends discountsAnd more!....Read more...
