Electronic Test Equipment Calibration Engineer required to join a growing Calibration and Maintenance team for a defence company supporting Armed Forces to defending our freedom.
As part of an experienced team of Calibration and Maintenance Engineers you will support complex test platforms in the manufacture and test of missile systems by calibrating bespoke factory test equipment from DC to Microwave.
Requirements
Experience calibrating test equipment to component level.
Ability to work from specifications, handbooks and drawings to conduct appropriate measurements and repairs down to component level on electronic test equipment.
HNC, HND or higher qualification in Electrical or Electronics Engineering.
Responsibilities
Service Electrical and Electronic Test Equipment, including Special to Type Test Equipment STTE, work is extremely varied, interesting and challenging.
Support manufacturing across all stages of product assembly integration and test.
Resolve routine and nonroutine including calibrations, commissioning, drift analysis, fault finding and repair of test equipment.....Read more...
Mobile Electrical Maintenance Engineer – FM Service Provider – London & Home Counties (Mixed Portfolio) – Up to £48,000 per annum + Package Exciting opportunity to join an established FM service provider operating across London and the Home Counties. CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to cover a mixed portfolio of predominantly commercial sites, along with some high-end residential properties. The successful candidate will be electrically qualified (City & Guilds Level 2 & 3 with 18th Edition) and have a proven track record in commercial building maintenance. This is a mobile role, requiring travel between sites to carry out both planned preventative and reactive maintenance across electrical, mechanical, and general building services. Candidates based in or around the West side of London would be highly desirable due to the location of the portfolio. In return, the company is offering a competitive salary of up to £48,000, a low call-out frequency, excellent overtime opportunities, further training, and clear career progression. Hours of Work: - Monday to Friday - 08:00 am – 17:00 pm - 1 in 14 Call-out Key Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive maintenance across multiple sitesElectrical maintenance, including lighting installations, fault-finding, lamping, ballast changes, and control panelsEmergency lighting testing and maintenanceMonitor and operate BMS systems (hot & cold checks)Maintain and update logbooks and compliance recordsCarry out basic plumbing works, including unblocking toiletsSupport maintenance of pumps and motorsAssist with general building services and fabric maintenanceEnsure all work is completed in line with health & safety regulationsProvide a professional, client-facing service at all timesPackage:Salary: Up to £48,000 per annum25 days holiday + bank holidaysCompany pension schemePrivate use availableOvertime opportunitiesTraining and development opportunitiesRequirements:Electrically qualified – City & Guilds Level 2 & 3 (Essential)18th Edition Wiring Regulations (Essential)Proven track record in commercial building maintenanceMulti-skilled with good knowledge of mechanical and fabric systemsStrong communication and client-facing skillsMust be able to provide copies of trade certificatesPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Multi-Skilled Maintenance Engineer (Mechanical or Electrical Bias)
Our client is a leading UK manufacturer of essential building products, operating across 17 sites nationwide and supplying materials that support the UK construction industry.
They are looking to recruit a Multi-Skilled Maintenance Engineer to join their close-knit maintenance team within a heavy industrial manufacturing environment. The company will consider engineers with either a mechanical or electrical bias.
Key Responsibilities
Reactive and planned maintenance on industrial production machinery
Fault finding on electrical and mechanical systems
Working on equipment such as conveyors, mixers, kilns and ovens
Reading engineering drawings and electrical schematics
Supporting PPM schedules and continuous improvement projects
Completing maintenance reports and fault logs
Supporting machinery upgrades and installations
The Ideal Candidate
NVQ / City & Guilds Level 3 in Electrical or Mechanical Engineering
Experience working in a manufacturing or heavy industrial environment
Strong fault-finding and problem-solving skills
Comfortable working in a dusty / heavy plant environment
Able to work Panama shift pattern (days and nights)
Desirable
PLC knowledge (Siemens advantageous)
Experience with AC/DC drives
Basic mechanical fault finding or changeovers
Benefits
Competitive salary
Shift allowance
Enhanced pension
Employee Assistance Programme
Supportive and collaborative engineering team
If you’re looking for a hands-on engineering role within a stable UK manufacturing business, apply today or get in touch to learn more.
....Read more...
Mechanical Maintenance Engineer – FM Service Provider - Commercial Building – Knightsbridge, London- £45,000CBW Staffing Solutions is currently recruiting a Mechanical Maintenance Engineer based in a commercial building in Knightsbridge, London. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site.The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Mechanical building maintenance. In return, the company is offering a competitive salary of £45,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £45,00025 days holiday plus bank holiday rising to 28 days + bank holidays Call out 1 in 3, £100 standbyCompany Pension SchemeExcellent career progression opportunitiesPrivate healthcare Hours of workMonday to Friday – Split shifts 0700-1600 and 0900-1800 on a weekly rotationKey Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically qualified - City & Guilds Level 2 (Essential)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Mechanical Maintenance Engineer – FM Service Provider - Commercial Building – Victoria, London- £46,000 - No call outCBW Staffing Solutions is currently recruiting a Mechanical Maintenance Engineer based in a commercial building in Victoria, London. He or she will be required to carry out planned and reactive building maintenance alongside the maintenance team on site.The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Mechanical building maintenance. In return, the company is offering a competitive salary of £46,000, overtime, further training and a potential route into further career progression. In return, my client is offering a very competitive package including:A basic salary of up to £46,00025 days holiday plus bank holiday rising to 28 days + bank holidays No call outCompany Pension SchemeExcellent career progression opportunitiesPrivate healthcare Hours of workMonday to Friday – 08:00-17:00 Key Duties & ResponsibilitiesMonitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsRequirementsMechanically qualified - City & Guilds Level 2 (Essential)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient Facing Please send your CV to Alex Denton of CBW Staffing Solutions to avoid missing out on the role !....Read more...
Mobile Electrical Engineer - 1 in 14 Callout - Mixed Portfolio - FM Service Provider - London & Home Counties - Up to £48,000An exciting opportunity to join an established building services company based across London has arisen! CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to be based on a mixed portfolio of high-end residential and commercial sites (Mainly commercial) located across London and Home Counties. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £48,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday8:00 am to 17:00 pm1 in 14 CalloutKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £48,00025 days holiday + Bank holidaysPrivate use availableFurther trainingCompany pensionRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Charlie Long of CBW Staffing Solutions for more information.....Read more...
Mobile Electrical Engineer - Mixed Portfolio - FM Service Provider - London & Home Counties - Up to £48,000An exciting opportunity to join an established building services company based across London has arisen! CBW Staffing Solutions is currently recruiting for a Mobile Electrical Maintenance Engineer to be based on a mixed portfolio of high-end residential and commercial sites located across London and the Home Counties. He or she will be required to carry out PPMs and reactive building maintenance to both electrical and mechanical systems on site. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in Electrical, Mechanical & general building maintenance. In return, the company is offering a competitive salary of up to £48,000, overtime, further training, and a potential route into further career progression. Hours of workMonday to Friday8:00 am to 17:00 pmCallout - £150 Standby AllowanceKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, etc)Emergency lighting testsControl PanelsChanging BallastBMS System - Monitor (i.e. Hot & cold)Maintain and update Log booksPlumbing - Unblocking toiletsPumps, motorsPackageUp to £48,00020 days holiday + Bank holidays - Increasing to 22 after 3 yearsPrivate use availableFurther trainingCompany pensionRequirementsElectrically qualified - City & Guilds Level 2&3 (Required)18th Edition (Required)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this opportunity, please send your CV to Archie Reed of CBW Staffing Solutions for more information.....Read more...
We specialise in the development of novel sensor technologies, high-powered electro-mechanical devices, and high-pressure and temperature applications used in well monitoring, intervention and abandonment. One of our key product lines seeks to reduce the cost of plug & abandonment of end-of-life wells as the output from oil & gas declines.
As well as gaining practical experience, you'll have the opportunity to broaden your foundational knowledge and develop your skills in problem-solving and teamwork.
While at work, you'll support the Mechanical Design team with all aspects of mechanical design work, acquiring a comprehensive understanding of customer specifications and helping to develop cost effective design solutions. This will involve:
Computer Aided Design using SolidWorks
Theoretical analysis and mathematical modelling in support of concept development and design verification
Understanding engineering materials and manufacturing processes for complex machined parts
Building prototypes to test their function
Documenting appropriate experiments and tests
Writing detailed technical documentation
Sourcing components and liaising with suppliers
Designing simple electrical and electronic circuits
Integration of electro-mechanical systems and software interfacing
Training:You'll achieve a BEng(Hons) in Mechanical Engineering with Manufacturing degree, accredited by the Institution of Mechanical Engineers (IMechE), and benefit from UWE's industry-standard facilities and equipment in their state-of-the-art engineering building.Training Outcome:On completion of your apprenticeship, you will work as a Mechanical Design Engineer, following potential pathways to a senior technical role in engineering consultancy or a leadership role in engineering research & development.
We will provide financial support and mentoring to help you qualify either as a Chartered Engineer (CEng) or Incorporated Engineer (IEng). You will have the opportunity to do varied work with increasing responsibilities, that will help you demonstrate the core competencies required for engineering chartership.Employer Description:Since we formed in 2009, we have gained a global client base as experts in our field. Our business operates at the cutting edge of engineering innovation. You'll benefit from working in a small team and a dynamic environment with ample opportunities for cross-collaboration. Working Hours :Our working day is 8 hours excluding half an hour for lunch. The time you start and finish work is flexible and will be between 08.00 and 18.00 Monday to Friday.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
The role includes:
Engineering design support and CAD production
Preparation of technical drawings and design deliverables
Participation in structural inspections and investigations
Extraction and collection of samples for laboratory analysis
Management and organisation of company equipment stores
You will have the opportunity to work on high profile projects like:
Forth and Tay Road Bridges
HMS Belfast
Battersea Power Station
Kew Gardens Temperate House
Numerous Highways and Infrastructure Projects
Key Responsibilities:
Engineering & Design Support
Assist engineers in preparing technical drawings using CAD software
Support the production of design packages and formal deliverables
Maintain drawing registers and document revision control
Develop understanding of structural repair and protection systems
Support preparation of sketches, mark-ups and technical documentation under supervision
Site Inspection & Investigation
Assist with inspection of civil and structural assets across the UK
Support non-destructive testing of reinforced concrete and steel structures
Extract and collect samples from structures for laboratory analysis
Maintain clear, accurate and methodical site notes
Compile photographic and technical records for reporting purposes
Work outdoors in varying weather conditions
Climb ladders and access elevated or confined areas as required
Travel frequently throughout the UK, including occasional overnight stays
Equipment & Stores Management
Organise and maintain company equipment stores
Ensure all equipment is cleaned following use
Ensure equipment is functional, safe and ready for deployment
Maintain equipment logs and inspection/calibration records where required
Manage consumables and maintain orderly storage systems
Training:Training will take place once a week will take place at City of Westminster College, Paddington Campus (25 Paddington Green, London W2 1NB).Training Outcome:Continued employment with a growing team of Engineers.
This role provides a structured pathway into Engineering Technician [EngTech] registration, with the opportunity for continued training to Engineering roles, Incorporated Engineer [IEng] or Chartership [CEng].
This role offers specialist training in Cathodic Protection to BS EN ISO 15257:2017, Level 3 with opportunity to continue training to Level 4 [Senior Cathodic Protection Engineer].Employer Description:Corrosion Engineering Solutions Ltd is a specialist UK consultancy based in Tring, Hertfordshire, providing corrosion engineering, inspection, investigation and design services to the construction and infrastructure sectors.
We are experts in the design and implementation of Cathodic Protection systems for Historic Buildings, Concrete Structures, Ports and Harbours and Buried Infrastructure.
We assess, design and deliver solutions for the protection and repair of reinforced concrete and steel structures. Our work combines technical design, structural inspection, materials science and practical site engineering. We operate nationally and work on complex infrastructure and structural assets.Working Hours :8 hours per day, between the hours of 08.00 and 18:00.Skills: IT skills,Attention to detail,Organisation skills,Team working,Initiative,Physical fitness,Willingness to learn,Eligible for BPSS screening,Experience with CAD software,Methodical approach to work....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills:
Hands-on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
We are looking for a Senior RF Antenna Design Engineer to help develop next generation of satellite communication antenna systems. Reporting to the Director, you will lead EM simulations, measurements, and analysis for dielectric lenses, feed antennas, and phased arrays. This role focuses on designing and optimising antennas using EM simulations and prototypes. Experience in phased arrays, transmit, RF lenses, microstrip antennas, and metamaterials is highly valuable. Knowledge of RF circuits, scripting, and RF measurement tools is a plus.
Key Responsibilities
Design and analyse antennas (feed antennas, dielectric lenses, arrays, radomes).
Develop antennas for manufacturing and prototypes.
Analyse results using Matlab and Python to optimise models.
Lead or assist in antenna testing and measurements.
Present findings through reports and slides.
Requirements
5 years in antenna design and analysis (lenses, phased arrays, radomes, beamforming).
Proficient in EM simulation tools like HFSS, CST, or FEKO.
Strong skills in Matlab, Python, and RF testing equipment.
Experience with Linux and leadership abilities....Read more...
RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation. The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing. This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing.....Read more...
We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI).
Key Responsibilities
Develop, implement, and optimise production processes, work instructions, and test procedures.
Support NPI, running pilot builds, and transitioning products to full-scale manufacturing.
Maintain and troubleshoot production equipment, tooling, and fixtures.
Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions.
Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies.
Provide day-to-day support and training to production staff.
Requirements
Two or more years of experience in production engineering, process engineering, or manufacturing support.
Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring).
Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems.
Strong analytical, problem-solving, and communication skills.
Experience in high-mix or low-volume manufacturing environments.....Read more...
RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation. The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing. This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing.....Read more...
We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI).
Key Responsibilities
Develop, implement, and optimise production processes, work instructions, and test procedures.
Support NPI, running pilot builds, and transitioning products to full-scale manufacturing.
Maintain and troubleshoot production equipment, tooling, and fixtures.
Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions.
Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies.
Provide day-to-day support and training to production staff.
Requirements
Two or more years of experience in production engineering, process engineering, or manufacturing support.
Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring).
Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems.
Strong analytical, problem-solving, and communication skills.
Experience in high-mix or low-volume manufacturing environments.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills:
Hands-on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes. You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills.....Read more...
A great opportunity for a Mechanical Design Engineer to join a growing engineering team working on advanced flight simulator hardware. Youll be contributing to the design and development of high-fidelity training systems used by pilot training organisations worldwide.
In this role, youll be involved in developing mechanical and electromechanical systems, producing detailed models and drawings, supporting testing and validation, and working closely with cross-functional teams to deliver high-quality, safety-critical hardware. This is a fast-paced environment where ownership, agility, and collaboration are key.
What youll be doing
- Designing mechanical and electromechanical hardware for next-generation flight simulators
- Producing detailed 3D models, drawings, and specifications using industry-standard CAD tools
- Working with systems, software, and project teams to deliver integrated solutions
- Ensuring compliance with aerospace standards and supporting testing/validation
- Contributing to continuous improvement and evaluating new tools and technologies
- Supporting supplier management and component integration
- Providing technical leadership or mentoring depending on seniority
What were looking for
- Degree in Mechanical Engineering (or related field)
- Experience in mechanical/electromechanical hardware development
- Strong CAD skills (experience with Creo/Pro-E or CATIA V5 is a big plus)
- Experience with structural analysis/FEA tools (NASTRAN, Ansys, Abaqus welcomed)
- Familiarity with PLM systems (Windchill, Teamcenter)
- Understanding of aerospace mechanical/electrical standards
- Strong problem-solving skills and experience with testing/validation
- Comfortable working in multi-disciplinary teams
- Experience in flight simulation, aerospace, automotive, wind energy, or similar industries is an advantage
Benefits
- Pension matched up to 7%
- 25 days annual leave + bank holidays (increasing with service)
- Private Medical Insurance
- Life Assurance (4x salary)
- Group Income Protection
- Employee Assistance Programme (24/7 support)
- Digital GP access
- Holiday buy/sell scheme (up to 5 days)
- Retail, travel & leisure discounts
- Onsite parking with EV charging
If youre looking to work on meaningful, technically challenging projects within a collaborative engineering environment, this could be a great next step.
TT....Read more...
QHSE Engineer
Location: Liverpool/Den Helder
Contract Type: Full-time, Permanent
Salary: Competitive
Start Date: Immediate/Negotiable
Experienced in delivering safety, quality and environmental excellence across projects? If you’re passionate about building HSE systems and ensuring operational safety, then this is the role for you.
Key Responsibilities
Documentation & Systems
Review client QHSE requirements for each project
Align and bridge client documentation with internal management systems
Identify gaps or changes required between systems
Ensure offshore personnel (e.g., dive supervisors) know exactly which procedures and documents to follow
Project Support
Work closely with Project Engineers developing work procedures.
Ensure procedures clearly define steps for operational personnel (e.g., divers)
Mobilisation Support
Attend vessel mobilisations as an independent observer
Provide an additional QHSE oversight function during mobilisation
Ensure operations and preparations are conducted correctly
Offshore / Operational Support
Provide support to the offshore team if required
Act as a focal point for incidents and investigations
Incident & Investigation Support
Use Topset-style accident investigation principles (formal training not essential)
Provide onshore support to managers dealing with incidents
Experience Required:
Around 5+ years’ experience
Marine/Offshore Experience
Awareness of Subsea Activities
This is a rare opportunity to work with a dynamic and forward-looking company. If this sounds like the perfect role for you, then please drop your CV below or email me at !....Read more...
Dive into the exciting realm of Fire and Security Engineering, where you will service, commission, and maintain systems that protect individuals, homes, and properties
Learn the ins and outs of our innovative fire and security systems, including fire detection, intrusion detection, CCTV, and access control systems
You’ll spend significant time at our client sites, where you’ll be hands-on with servicing and repairing fire and security equipment. This invaluable experience will immerse you in the world of fire and security engineering
Hit the road visiting a variety of sites, from residential to commercial and retail locations
Collaborate with a dedicated team, absorbing invaluable skills that will pave the way to becoming a qualified fire and security engineer
Training:
Enrol in a Level 3 Fire Emergency and Security Systems Technician qualification delivered by Banham Academy alongside fellow Johnson Controls apprentices
Engage in block release basis training and receive on-the-job guidance from experienced mentors and engineers
Training Outcome:
Upon completion of this apprenticeship, there are many internal opportunities within the company
Many of our previous apprentices have become lead engineers and take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :8:30am - 5.00pm, or as per business needs. Days to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
Dive into the exciting realm of Fire and Security Engineering, where you will service, commission, and maintain systems that protect individuals, homes, and properties
Learn the ins and outs of our innovative fire and security systems, including fire detection, intrusion detection, CCTV, and access control systems
You’ll spend significant time at our client sites, where you’ll be hands-on with servicing and repairing fire and security equipment. This invaluable experience will immerse you in the world of fire and security engineering
Hit the road visiting a variety of sites, from residential to commercial and retail locations
Collaborate with a dedicated team, absorbing invaluable skills that will pave the way to becoming a qualified fire and security engineer
Training:
Enrol in a Level 3 Fire Emergency and Security Systems Technician qualification delivered by Banham Academy alongside fellow Johnson Controls apprentices
Engage in block release basis training and receive on-the-job guidance from experienced mentors and engineers
Training Outcome:
Upon completion of this apprenticeship, there are many internal opportunities within the company
Many of our previous apprentices have become lead engineers and take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :8:30am - 5pm or as per business needs. Days to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
Dive into the exciting realm of Fire and Security Engineering, where you will service, commission, and maintain systems that protect individuals, homes, and properties
Learn the ins and outs of our innovative fire and security systems, including fire detection, intrusion detection, CCTV, and access control systems
You’ll spend significant time at our client sites, where you’ll be hands-on with servicing and repairing fire and security equipment. This invaluable experience will immerse you in the world of fire and security engineering
Hit the road visiting a variety of sites, from residential to commercial and retail locations
Collaborate with a dedicated team, absorbing invaluable skills that will pave the way to becoming a qualified fire and security engineer
Training:
Enrol in a Level 3 Fire Emergency and Security Systems Technician qualification delivered by Banham Academy alongside fellow Johnson Controls apprentices
Engage in block release basis training and receive on-the-job guidance from experienced mentors and engineers
Training Outcome:
Upon completion of this apprenticeship there are many internal opportunities within the company
Many of our previous apprentices have become lead engineers and take control of their own team and projects
Employer Description:Johnson Controls is a global leader in technology and industry, serving customers in over 150 countries. Our mission is to create intelligent buildings, efficient energy solutions, and integrated infrastructure. We welcome individuals with a passion for engineering to join us in shaping a better tomorrow through our diverse range of projects and opportunities.Working Hours :8:30am- 5.00pm or as per business needs. Days to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
AV Installation Engineer - This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 1-2years high end residential audio visual experience. Ideally you will live in SURREY and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. The role comes with a vehicle the the ability to drive is needed. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA HERTS HERTFORDSHIRE LONDON....Read more...
