Duties will include, but will not be limited to:
Hands-on installation and commissioning of electrical components and systems, including motor drives, 3-phase and DC systems. Fully competent at using primary and secondary test equipment.
Carry out diagnostics and problem-solving for electrical and instrument systems.
Assist the remote software engineer with configuration and fault diagnosis on PLC systems.
Maintain plant equipment for clients such as pumps, mixers, motors, electrical and control systems/SCADA, heat exchangers, gas storage, sensors, alarms, valves, safety systems etc.
Fault finding and maintaining mechanical assets, including pumps, gearboxes, valves etc.
Carry out pre-planned and reactive maintenance on a range of mechanical equipment.
Undertake measures to improve the plant reliability, efficiency and performance, always in a safe and efficient manner.
Training:
The Apprentice will work towards their Apprenticeship Standard in Level 3 Engineering Maintenance Technician.
The successful candidate will be assigned a dedicated assessor who will provide support and guidance throughout the course.
This is a Day Release programme which means you will attend Lincoln/Newark College, 1 day per week, term time only. This will fall within your contracted working hours.
Training Outcome:Upon completing their apprenticeship, individuals can look forward to a range of promising career prospects within the renewable energy sector. Successful Apprentice Technicians often progress into full-time roles such as Plant Technician, Maintenance Engineer, or Process Operator, with opportunities to specialise in areas like plant optimisation or environmental compliance. Typically, Plant Technicians can expect to earn between £25,000 and £32,000 per annum. Maintenance Engineers in this sector often command salaries ranging from £30,000 to £40,000, while Process Operators usually earn between £22,000 and £30,000 per year. Higher earnings may be possible with additional qualifications, experience, or supervisory responsibilities, especially in larger facilities or those employing advanced technology. With further experience and continued professional development, there is potential to advance into supervisory or managerial positions, or to explore roles in project management and technical consultancy. For managerial positions within anaerobic digestion, such as Plant Manager or Operations Manager, salaries generally range from £40,000 to £60,000 per annum, with the potential to exceed this in senior or multi-site roles. Project Managers overseeing new facility construction or upgrades can typically expect earnings between £45,000 and £65,000, depending on project scale and complexity. Technical consultants specialising in anaerobic digestion may command an annual package from £45,000 up to £75,000, reflecting their expertise and industry demand. The growing emphasis on sustainable energy ensures that skilled professionals in this field will remain in high demand, both in the UK and internationally.Employer Description:Anaergia is a global leader in anaerobic digestion and organics recovery, recognised by the Anaerobic Digestion and Bioresources Association (ADBA) for its innovative waste-to-energy solutions. Anaergia specialises in anaerobic digestion (AD), organics recovery, and waste conversion. The company provides end-to-end solutions for converting various waste streams, including agricultural, food, and municipal solid waste (MSW), into renewable energy, high-quality fertiliser, and recycled water. Anaergia also offers services ranging from equipment supply to full project design, financing, construction, and plant operation. Anaergia has been active in the UK for over a decade, with 13 anaerobic digestion plants installed by the end of 2020. The company provides engineering, service, and maintenance support for AD plants, including installation of organics recovery systems, digestate separators, mixers, and specialised pump systems. This is the team you would be working with. Anaergia also focuses on upgrading underperforming facilities to improve efficiency and profitability for clients.Working Hours :A normal day may be 8am-5pm, but some days may run over, depending on the job. These hours will be given back on another day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
DevOps Engineer – SaaS / Infrastructure – Solothurn / Hybrid
(Key skills: DevOps, Infrastructure as Code (IaC), Kubernetes, Docker, Cloud (AWS/Azure/GCP), CI/CD, Automation, Monitoring & Logging, Linux Systems, Agile, Java, Spring Boot, Quarkus, GitLab, Nexus, Quay, ArgoCD, Tekton, Jenkins, SRE Mindset)
Are you a highly motivated DevOps professional who thrives at the intersection of development, infrastructure and operations? Do you enjoy driving automation, streamlining delivery pipelines and ensuring high-availability platforms that support SaaS products? If so, this is an excellent opportunity to join a technology-driven company expanding its Swiss presence.
Our client, an innovative international SaaS business with growing Swiss operations, is seeking a DevOps Engineer to join their infrastructure team. You will be working in a hybrid environment (Solothurn base plus hybrid flexibility), collaborating across engineering, development and operations teams to help define, build and optimise the delivery platform supporting tens of thousands of users.
In this role you will design, implement and operate infrastructure and deployment pipelines. You’ll take ownership of Kubernetes clusters, container orchestration, automated build and release processes, and monitoring/alerting systems. You’ll work with tools like Terraform, Ansible or CloudFormation to build robust infrastructure as code. You’ll partner with software engineers to ensure production systems are scalable, resilient and secure, and you’ll embed SRE practices across the lifecycle.
You’ll be expected to monitor and manage system performance, lead incident investigations when required and implement mitigation strategies. Your day-to-day may include designing dashboards, improving observability using Prometheus/Grafana/Datadog, automating repetitive tasks, and continuously iterating on infrastructure and pipeline improvements. You’ll also contribute to evolution of deployment practices, configuration management and the overall reliability of the platform.
This is a strong opportunity to join a company where your contributions will have direct customer impact and where DevOps capabilities are central to growth and stability. You’ll be joining a forward-thinking team, operating in Agile modes, and working in a hybrid environment with a base in Solothurn.
Location: Solothurn, Switzerland / Hybrid working
Salary: CHF110,000 – CHF135,000 + Bonus + Benefits
Applicants must have the right to work in Switzerland.
Applicants must be able to speak Fluent German (C1).
NOIRSWITZERLANDRECSP
NOIRSWITZERLANDREC
NOIREUROPEREC....Read more...
M&E Maintenance Engineer – FM Service Provider – Commercial Building – Aldgate, East London – Up to £45,000 per annum Exciting opportunity to join a leading FM service provider based at a large commercial office building in Aldgate, East London. CBW Staffing Solutions is currently recruiting for a Mechanical/Electrical Maintenance Engineer to work within a small on-site team, delivering high-quality building maintenance across landlord services. The successful candidate will be mechanically/electrically qualified (City & Guilds / NVQ Level 2 & 3) with a proven track record in commercial building maintenance. Working alongside a team of 3 engineers, you will be responsible for carrying out both planned preventative and reactive maintenance across mechanical, electrical, and general building services. In return, the company is offering a competitive salary of up to £45,000, excellent overtime opportunities, and clear routes for training and career progression. Hours of Work:Monday to Friday (40-hour week)08:00 am – 17:00 pmEvery third week: 10:00 am – 19:00 pmOvertime available at weekendsKey Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive maintenance across building servicesElectrical maintenance including lighting, fault finding, ballast changes, control panels, and power distributionEmergency lighting and fire alarm testingMaintain and monitor pressurisation units and plant room equipmentService HVAC plant including AHUs and FCUs (filter changes and cleaning)Carry out chiller resets and basic fault diagnosisMaintain pumps, motors, and associated mechanical systemsConduct water treatment tasks including temperature checksCarry out plumbing maintenance including unblocking toilets and replacing taps and sealsMonitor BMS systems (hot & cold checks)Monitor UPS systems and take readingsComplete general building fabric maintenanceEscort and supervise specialist subcontractorsPackage:Salary: Up to £45,000 per annum25 days holiday + bank holidaysBirthday off as additional leaveCompany pension schemeOvertime opportunities availableInternal and external training coursesExcellent benefits packageGenuine career progression opportunitiesRequirements:Mechanical/Electrically qualification – City & Guilds / NVQ Level 2 & 3 (Essential)City & Guilds / NVQ - 18th Edition (Desired)Must be able to provide copies of trade certificatesProven track record in commercial or property maintenanceMulti-skilled with a good understanding of building servicesStrong communication and customer service skillsReliable, hardworking, and professional attitudePlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Join a cutting-edge engineering team developing autonomous systems for the next generation of marine and defence technology. This is a fantastic opportunity for an experienced Software Engineer to take a leading role in designing, developing, and delivering advanced software solutions that operate in challenging real-world environments.
Youll work across the full software lifecycle, from concept and design through to integration, testing and delivery, as part of a multidisciplinary engineering team shaping the future of maritime autonomy.
What youll be doing
- Designing and developing software for advanced autonomous systems
- Supporting integration and delivery activities across complex engineering projects
- Collaborating with hardware, systems and domain experts throughout the development lifecycle
- Engaging directly with end users to refine functionality and performance
- Taking a lead role in development discussions and cross-team collaboration
What youll bring
- Proven experience in software design and delivery
- A degree (or equivalent experience) in Software Engineering, Computer Science, or a related discipline
- Knowledge of autonomous system architectures and the marine or defence domain
- Strong understanding of software engineering processes, tools, and lifecycles
- Experience working in multi-disciplinary engineering environments
Technical skills
Essential:
- Java development
- Java build systems (e.g. Maven)
- Experience with the Atlassian toolset (Jira, Confluence, Bitbucket)
- Knowledge of ISO 9001 quality principles
Desirable:
- HMI / UI development (e.g. JavaFX)
- GIS development
- Communication and control system interfaces
- Git version control
- UML design
Why apply?
- Hybrid and flexible working options (full-time, part-time or condensed hours)
- Excellent professional development and progression opportunities
- Collaborative and innovative engineering culture
- Competitive salary, pension and benefits
Security Clearance: Applicants must be eligible to obtain UK Security Clearance (SC).
TT....Read more...
Electronics Design Engineer required to work on RF Antenna terminals for airborne, border protection and maritime communications in the defence avionics and mobile wireless networking industries.
You will join a team working at the cutting edge of RF and Microwave Ku/Ka, GNSS and LTE satellite phased array system design and development.
Technical environment
Electronic Circuit Design and layout, Schematic Design, safety critical electronics, Altium, satellite terminals, Analogue, DC low frequency circuits, SPICE, satellite phased array RF systems, RFIC, line-up, PCB, digital electronics, FPGA, ASIC, SD modems, mixed signal, RFSoC, Algorithms, Digital Signal Processing, RTL Design, Filter Design, High Frequency Electronics, ANSYS HFSS, High speed, ADC, DAC, serial communications, Audio, signal conditioning, programmable logic design, Xilinx and Altera, RFID, EMC, ESD.
Your primary contribution will be PCB hardware satellite terminal design ....Read more...
Electronics Design Engineer required to work on RF Antenna terminals for airborne, border protection and maritime communications in the defence avionics and mobile wireless networking industries.
You will join a team working at the cutting edge of RF and Microwave Ku/Ka, GNSS and LTE satellite phased array system design and development.
Technical environment
Electronic Circuit Design and layout, Schematic Design, safety critical electronics, Altium, satellite terminals, Analogue, DC low frequency circuits, SPICE, satellite phased array RF systems, RFIC, line-up, PCB, digital electronics, FPGA, ASIC, SD modems, mixed signal, RFSoC, Algorithms, Digital Signal Processing, RTL Design, Filter Design, High Frequency Electronics, ANSYS HFSS, High speed, ADC, DAC, serial communications, Audio, signal conditioning, programmable logic design, Xilinx and Altera, RFID, EMC, ESD.
Your primary contribution will be PCB hardware satellite terminal design ....Read more...
RF Design Engineer required, ideally Senior level to work on defence, military and avionics communications for long range real time video new product design and development. You will join a successful RF and Hardware Design team and work across the full product lifecycle from requirements through design, test, release and support of RF systems.
Requirements
British citizen eligible for security clearance
Radio Frequency System Architecture
RF Simulation
Altium Electronics Schematic capture, PCB Layout and Footprint or symbol Creation
Real time long range data link knowledge
High resolution video transfer understanding.
RF inhibitor exposure.
Bachelors or Masters degree in Engineering or related subject.
Role
RF Design for New Product Introduction or NPI and the evolution of existing world class RF systems for defence and aviation.
RF System Architecture exploiting the latest RF components and technologies.
RF Simulation using tools such as LabVIEW.
Schematic capture and PCB Design Layout in Altium.
Linear high power wide band RF amplifiers up to 200 Watts using for example GaN or LDMOS.
RF filter design.
Radio Transmitter and Receiver Design.
LNA, Down converter and Upconverter design.
Antenna design.
Use of oscilloscopes, analysers and signal generators.
Cadence AWR Microwave Office.
Ansys HFSS.
Switch mode PSUs, embedded circuitry, glue logic, analogue electronics and EMC circuitry.....Read more...
As a Degree Engineer Technician, we’ll work in partnership to create a personal development plan designed to focus on the specific learning and development needs associated with your role. You’ll gain exposure to a wide range of disciplines including bespoke technical training within Engineering placements around the business, aiding in development of mechanical and electrical systems in the Aerospace industry, with particular focus on Air to Air Refuelling and Actuation.
You must be able to work on your own initiative, and as part of a team and have an enthusiasm for learning as 6 years will be dedicated to your studies. Due to the rotational structure of the first 3 years, you will need to be an individual that embraces change and adapts to new situations successfully, with the confidence to ask questions and absorb information.
The structure of the Degree Apprentice programme will be as follows:
Year 1 & 2 - During your first two years, you will combine work based learning with day release study at Bournemouth and Poole College, completing the initial stages of the Product Design & Development (Mechanical Design) degree pathway.
While on site, you will take part in rotational placements designed to give you a broad understanding of the business and support the needs of your academic curriculum. These rotations will include gaining hands on experience within our shop floor environment to develop familiarity with our products and manufacturing processes, before moving into office based areas such as Production Support, Simulation and Modelling, Systems Test, Airworthiness, Avionics, and Design.
Year 3 - The rotational structure will continue, and you will be gaining experience within functional specialisms, for example, Research and Development, and Air to Air Refuelling and Actuation Integrated Project Teams on an extended placement structure. You will continue with your professional studies through day release at Bournemouth College, studying towards your 3rd year of your BEng.
Year 4 & 5 – From Year 4 onward, the rotational element is removed, and you will move into a permanent role aligned to your interests, strengths, and development expectations, as well as those needs of the business. Alongside this, you will continue with your remaining two years of academic study, working towards the completion of your full BEng degree at Bournemouth University.
Year 6 – In your final year, you will focus on finalising your preparation of the mandatory End Point Assessment, which evaluates the knowledge, skills, and behaviours you have developed throughout the programme.Training:Level 6 Product Design & Development Engineer Degree Standard.
Personal Development Programme.Training Outcome:Progression to full time employment.Employer Description:Join Eaton and be a part of our commitment to providing impactful, energy efficient solutions that shape a sustainable future. At Eaton, we make what matters work, and we're dedicated to a workplace where ethics, inclusion, diversity, and our people are at the forefront. Located in Wimborne, Dorset, Eaton's Aerospace division is a global leader in aerospace fuel systems, renowned for delivering fully integrated solutions for both fixed and rotary wing aircraft. Our Wimborne facility specialises in cutting edge air to air refuelling systems, advanced refuelling probes, air to air and air to ground launch systems utilising both pneumatic and pyrotechnic ejection technologies, as well as a range of Defensive Aids Sub-Systems. With over 90 years of industry experience, we are recognised as the world’s leading provider of air to air refuelling systems, offering fifth generation solutions to Air Forces worldwide. Our legacy of innovation and technical excellence sets us apart as the most advanced air to air refuelling supplier on the globe.Working Hours :Monday - Friday, 08:00 - 16:30, possibility of shift work in line with placement rotations.Skills: Administrative skills,Analytical skills,Attention to detail,Communication skills,Customer care skills,Ethical,Initiative,IT skills,Logical,Non judgemental,Number skills,Organisation skills,Patience,Presentation skills,Problem solving skills,Team working....Read more...
Hands on installation and commissioning of electrical components and systems to include motor drives, 3 phase and DC systems
Fully competent at using primary and secondary test equipment
Carry out diagnostics and problem solving for electrical and instrument systems
Assist remote software engineer with configuration and fault diagnosis on PLC systems
Maintain plant equipment for clients such as pumps; mixers; motors; electrical and control systems/SCADA; heat exchangers; gas storage; sensors; alarms; valves; safety systems etc.
Fault finding and maintaining mechanical assets including pumps, gearboxes, valves etc.
Carry out pre-planned and reactive maintenance on a range of mechanical equipment
Undertake measures to improve the plant reliability, efficiency and performance, always in a safe and efficient manner
Training:
Training will take place at Boston College 1 day per week, must be able to attend in person
Training Outcome:Upon completing their apprenticeship, individuals can look forward to a range of promising career prospects within the renewable energy sector. Successful Apprentice Technicians often progress into full-time roles such as Plant Technician, Maintenance Engineer, or Process Operator, with opportunities to specialise in areas like plant optimisation or environmental compliance. With further experience and continued professional development, there is potential to advance into supervisory or managerial positions, or to explore roles in project management and technical consultancy. The growing emphasis on sustainable energy ensures that skilled professionals in this field will remain in high demand, both in the UK and internationally.
Typically, Plant Technicians can expect to earn between £25,000 and £32,000 per annum. Maintenance Engineers in this sector often command salaries ranging from £30,000 to £40,000, while Process Operators usually earn between £22,000 and £30,000 per year. Higher earnings may be possible with additional qualifications, experience, or supervisory responsibilities, especially in larger facilities or those employing advanced technology. With further experience and continued professional development, there is potential to advance into supervisory or managerial positions, or to explore roles in project management and technical consultancy. For managerial positions within anaerobic digestion, such as Plant Manager or Operations Manager, salaries generally range from £40,000 to £60,000 per annum, with the potential to exceed this in senior or multi-site roles. Project Managers overseeing new facility construction or upgrades can typically expect earnings between £45,000 and £65,000, depending on project scale and complexity. Technical consultants specialising in anaerobic digestion may command an annual package from £45,000 up to £75,000, reflecting their expertise and industry demand. The growing emphasis on sustainable energy ensures that skilled professionals in this field will remain in high demand, both in the UK and internationally.Employer Description:Anaergia is a global leader in anaerobic digestion and organics recovery, recognized by the Anaerobic Digestion and Bioresources Association (ADBA) for its innovative waste-to-energy solutions.
Anaergia specialises in anaerobic digestion (AD), organics recovery, and waste conversion. The company provides end-to-end solutions for converting various waste streams, including agricultural, food, and municipal solid waste (MSW), into renewable energy, high-quality fertiliser, and recycled water.
Anaergia also offers services ranging from equipment supply to full project design, financing, construction, and plant operation.
Anaergia has been active in the UK for over a decade, with 13 anaerobic digestion plants installed by the end of 2020. The company provides specialised pump systems. Anaergia also focuses on upgrading underperforming facilities to improve efficiency and profitability for clients.Working Hours :4 days per week on site.
1 day per week in college.
30-40 paid hours per week. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Jnr AV Installation Engineer MARINE – My client are looking to the future and now wish to train and develop your AV skills to become fully fledged in the world of AV Integration spcialising in the world of Super Yachts. The client are looking for you to have 1-2 years experience of AV integration gained from the high end residential av integration market place. . You will work alongside a lead / snr engineer acting as a sponge, developing both your hands on skills and your programming skills. You will be sent on all relevant training courses to make sure you have a thorough and in depth understanding of kit and systems that you will be working with. Ideally you will be living in HERTFORDSHIRE. You will need to have a superb attitude, be able to be on site on time and to do what is needed to get a project over the line. The role involve extensive overseas travel so the ability to be away from home is an absolute. Skills with soldering crimping and cable termination as well as rack building need to be clearly shown as part of your experience. The client are looking to the future so this potentially could be the role that you are seeking to take your av career to the next level. If this is the role and company that you see yourself at then I will need to see a fully technical CV that clearly shows your hands on experience and depth of experience with all av kit.
DUE TO THE NATURE OF THE ROLE THERE IS NO SPONSORSHIP ON OFFER
AV A-V A/V AUDIO-VISUAL AUDIOVISUAL LIGHTING SOUND CRESTRON LUTRON CONTROL4 SMARTHOME HOME-AUTOMATION RACK INSTALLATION RACK INTEGRATION DSP JNR TRAINEE BEDS BEDFORDSHIRE HERTS HERTFORDSHIRE ESSEX LONDON CEDIA AUTOMATION....Read more...
Mechanical / Plumbing Engineer – FM Service Provider – Commercial Site, Waterloo – Up to £36,000 per annum CBW Staffing Solutions is currently recruiting for a Mechanical / Plumbing Engineer to be based in a prestigious commercial building in Waterloo, London. This is an excellent opportunity to join a well-established FM service provider working across a unique and diverse site. The successful candidate will be mechanically or plumbing qualified (Level 2 NVQ / City & Guilds) with a proven track record in commercial building maintenance. You will be responsible for carrying out both planned and reactive maintenance across mechanical, plumbing, and general building services systems, working within a team of 4 engineers. In return, the company is offering a competitive salary of up to £36,000, call-out allowance, and opportunities for training and progression within a reputable organisation. Hours of Work:Monday to Friday (Rotating 3-week shift pattern)Week 1: 07:00 am – 16:00 pmWeek 2: 08:00 am – 17:00 pmWeek 3: 09:00 am – 18:00 pmKey Duties & Responsibilities:Carry out planned preventative maintenance (PPM) and reactive maintenancePerform plumbing maintenance, including repairs to toilets, sinks, and pipeworkDiagnose and repair faults across mechanical and plumbing systemsSupport maintenance of pumps, valves, and associated mechanical plantCarry out water hygiene tasks, including temperature checksAssist with minor installation works and system upgradesSupport general building services and fabric maintenance where requiredWork collaboratively within a team of 4 engineersEscort and liaise with specialist subcontractors on siteEnsure all works are completed in line with health & safety regulationsPackage:Salary: Up to £36,000 per annumCall-out rota: 1 in 4Standby allowance includedOvertime opportunities availableTraining and development opportunitiesCompany pension schemeRequirements:Mechanical or Plumbing qualification – Level 2 NVQ / City & Guilds (essential)Proven track record in commercial building maintenanceMulti-skilled with a good understanding of building servicesStrong communication and teamwork skillsReliable, professional, and client-focused attitudePlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Mobile Fabric Maintenance Engineer – FM Service Provider- SE Postcodes - up to £34,000 + Package Are you a Mobile Fabric Engineer looking for a new challenge?Do you live in a postcode of SE?Would you like to work for a leading Facilities Maintenance provider? An exciting opportunity to join an established Building Services company based across all of the SE postcodes. CBW Staffing Solutions are currently recruiting for a Mobile Fabric Engineer to carry out planned and reactive commercial maintenance across a retail contract based in SE postcode area. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in commercial building maintenance.This position would be ideal for a Mobile Maintenance Engineer currently in a similar position who is keen on progression. In return, the company is offering a competitive salary of up to £34,000 with a potential route into further career progression. Key Duties & ResponsibilitiesAbility to deliver excellent customer serviceTo undertake basic “Fabric duties” which would include touching up paintwork, tightening hinges, install/repair blinds, changing locks , making minor repairs to cabinets, desks, and putting together small equipment like chairs etc.To undertake some plumbing activities including but not limited to clearing blockages, attending to burst pipes, replacing components, servicing systems etc.Painting and DecoratingAssist with office moves (minor office churn) including furniture moversLiaising with the contract management teamInvestigating complaints and taking appropriate actionEnsuring feedback is provided to the helpdesk on the progress of M&E jobsCarry out specialist technical and non-technical work as deemed appropriate to the continuing maintenance function on the client portfolioOffer technical support and backup as requiredEnsure all personnel and contractors that may be working in hazardous areas take all safety measures to prevent danger, avoid injury and prevent damage to equipmentUse all relevant tools and equipment within the safety guidelines as necessary for the completion of worksTo ensure the client receives the highest level of service to their assets by carrying out reactive and planned maintenance, minor improvementsEnsure jobs are completed to a high standardAssist Multi-Skilled Engineers where requiredHours of Work & Package InformationBasic Salary of up to £34,0001 in 4 Call Out Rota - £15 per day standby allowanceMonday – Friday 08:00am – 17:00pm25 days holiday + Bank HolidaysCompany Van & Fuel CardTablet & Work Phone ProvidedFull company uniformRequirementsMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsIf you are interested in the role, please send a copy of your cv to Dan Barber @ CBW staffing solutions!....Read more...
Prepare and assemble units / PCB’s (including soldering) in accordance with detailed work instruction sheets, customer specific drawings and specifications.
Read and interpret complex CCA drawings, including systems and notes.
Verify that routings and detailed Work Instruction Sheets have been followed for all activities.
Training:Engineering Fitter Level 3 Advanced apprenticeship on Day release:
One of the following qualifications:
Advanced Manufacturing Engineering (Development Knowledge) – Awarding organisation EAL; GLH 750, or
Advanced Manufacturing Engineering (Development Technical Knowledge) – Awarding organisation Pearson; GLH 720 or
Diploma in Advanced Manufacturing Engineering (Development Knowledge) Awarding organisation City & Guilds; GLH 720
Functional Skills in maths and English (if required)
Our apprentices develop through experience, teamwork and training in a workplace that values customer focus, development and empowerment. You’ll be given the chance to experience all the different aspects of our business.Training Outcome:
Project Manager
Production Manager
Systems Engineer
Employer Description:STS Defence is a UK based technology and system integration company, specialising in mission-critical, highly secure communications and electronic systems.
We operate primarily in the defence naval and air sectors, helping our customers to resolve complex technical challenges by delivering innovative solutions and programmes; designing and assembling equipment and systems, and integrating and supporting capability through-life.Working Hours :Monday - Thursday, 08:00 - 16:30.
Friday, 08:00 - 13:00.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
Electrical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £57,000 + up to £3,000 annual bonus Pension: Up to 15% total (10% employer, 5% employee)
Overview
We are seeking a highly skilled Electrical Maintenance Engineer to join a large engineering team at a state‑of‑the‑art, highly automated manufacturing facility. This is a brand‑new, high‑volume production site—set to become one of the fastest in Europe—offering excellent training, modern equipment, and long-term progression.
This position has become available due to an engineer leaving, creating an excellent opportunity for a strong electrically‑biased engineer to join a well-supported and forward‑thinking team.
Key Responsibilities
Provide electrical maintenance, fault finding, and repair across a variety of automated manufacturing equipment.
Work on conveyors, mixers, ovens, kilns and other large-scale industrial machinery.
Support continuous improvement, reliability, and efficiency across the site.
Work within a large engineering team (approx. 20 engineers), ensuring safe and efficient operation of all equipment.
Complete handover processes daily (5:30–6:00).
Participate in holiday cover to reduce banked hours (296 hours reducing to 206 after handover deductions).
Undertake planned and reactive maintenance in a dusty, fast‑paced FMCG/industrial environment.
Overtime & Hours Structure
You will have 206 banked hours annually (equivalent to 18 days of overtime per year).
These hours can only be reduced through holiday cover.
Weekend holiday cover = time and a half deduction.
Any overtime not related to holiday cover = paid at time and a half.
Essential Requirements
Electrically qualified (City & Guilds / NVQ / HNC or equivalent).
Strong electrical bias with excellent fault‑finding skills.
Experience in FMCG or heavy industrial environments.
Experience with industrial electrical panels.
Exposure to automation, complex machinery, and fast‑paced engineering settings.
Desired Skills
Siemens experience (including Siemens S7)—desirable but not essential.
Ability to work within highly automated environments.
Experience in large production or manufacturing facilities.
Benefits
Up to 15% total pension (company contributes 10% when you contribute 5%).
Strong training and development opportunities.
Chance to work at a brand‑new, cutting-edge automated site with major production output.
Progression opportunities within a large engineering function.
Working Environment
Dusty industrial environment.
Highly automated systems and robotics.
Fastest producing site in Europe (target).
Large, supportive engineering team (approx. 20 engineers).
Interview Process
Stage 1: Informal technical discussion with Carl, reviewing your CV and experience.
Stage 2: On‑site technical assessment with an engineer.
Bring overalls & safety shoes.
Walk‑through of site.
Basic practical test (panel work, fault finding).
....Read more...
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team. The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems. This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package – Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120....Read more...
A Field Service Engineer is sought to join a growing engineering team in Cork, Ireland, contributing to the installation, service, commissioning, and technical support of advanced electronics manufacturing equipment across customer sites.
The Field Service Engineer, Cork, Ireland, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include installation and commissioning of SMT equipment, fault diagnosis, preventative maintenance, calibration, and applications support within electronics manufacturing environments.
Responsibilities include:
Provide installation, service, repair, calibration, and preventative maintenance of equipment at customer sites.
Commission equipment at customer facilities and support final release into production environments.
Assess the suitability of equipment and processes prior to customer purchase where required.
Diagnose faults and resolve technical issues relating to equipment and production processes.
Provide technical expertise and support to customers and internal stakeholders.
Maintain accurate documentation and service records associated with installations, maintenance, and repairs.
Identify equipment and process-related issues that could impact successful installation, training, or commissioning.
Support customer training and applications assistance where required.
Attend meetings, conferences, trade shows, and technical training courses as necessary.
Ensure full compliance with company policies, procedures, and operational standards.
Key skills & experience:
Degree in Mechanical or Electrical Engineering, or equivalent industry experience.
Minimum of five years’ experience within electronic engineering or electronics manufacturing environments.
Experience installing, servicing, repairing, and maintaining industrial or manufacturing equipment.
Knowledge of SMT and electronics manufacturing processes such as printing, dispensing, pick-and-place, reflow, vapour phase, selective and wave soldering, coating, cleaning, testing, and inspection.
Ability to interpret electrical and mechanical engineering drawings.
Strong IT skills including knowledge of PC systems, networking, or SQL databases.
Strong practical mechanical and technical problem-solving abilities.
Highly organised, self-motivated, and able to work independently in field-based environments.
Full driving licence and willingness to travel across Ireland and occasionally the UK.
How to apply:
Apply now for the Field Service Engineer role in Cork, Ireland. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
Mechanical Maintenance Engineer - FM Service Provider - Commercial Building - Aldgate, East London - Up to £45000 per annum Exciting opportunity to work for a leading FM service provider situated in Aldgate, East London. I am currently recruiting for a Multi-Skilled Mechanical Maintenance Engineer to be based in a static role in Aldgate, East London which is a large commercial office building.The successful candidate will be a fully qualified Mechanical Maintenance Engineer with C&G / NVQ level 2 & 3 and a proven track record in commercial building maintenance.He or she will be required to carry out M&E/Fabric planned and reactive maintenance in a large team on a large building responsible for all the landlord services. Working with the maintenance team of 3 engineers on site including the supervisor, you will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary of £45,000, overtime and career progression.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lighting & Fire Alarm Test'sPresurisation UnitsHVAC plantPlant room maintenanceAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setPumps, MotorsWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, changing taps, seals etcBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricEscort sub contractorsHours of workMonday to Friday (40 hour week / Overtime available at weekends)Hours 08:00am to 17:00pm (8 hour days) - Every Third Week the hours are 10:00am to 19:00pm PackageBasic Salary up to £45,00025 Days Annual Leave + Bank HolidaysBirthday off as HolidayPension Excellent Benefits package Internal and External Training CoursesGenuine career progression Lots of Overtime available. RequirementsMechanically Qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3 A proven track record in commercial or property maintenanceExcellent customer service skillsHonest, hard working and reliable Please send your CV to Dan Barber at Cbw Staffing Solutions for more Information!....Read more...
Electrical Maintenance Engineer – FM Service Provider – Commercial Office – City of London – Up to £52,000 per annum (Single-Man Site) An exciting opportunity to join an established FM service provider based in the City of London. CBW Staffing Solutions is currently recruiting for an Electrical Maintenance Engineer to take full responsibility for a single-man commercial office site, carrying out both planned and reactive maintenance. This role is ideal for an experienced Electrical Engineer looking to manage their own site and take the next step in their career. The successful candidate will be electrically qualified with a strong background in commercial building maintenance and confident working independently. In return, the company is offering a competitive salary of up to £52,000, excellent overtime opportunities, and clear career progression. Hours of Work: - Monday to Friday- 08:00 am – 17:00 pm Key Duties & Responsibilities:Electrical maintenance including lighting installations, fault-finding, lamping, ballast changes, control panels, and power distributionEmergency lighting testing and compliance checksMonitor and operate BMS systems (hot & cold checks)Carry out planned preventative maintenance (PPM) and reactive worksMaintain and update logbooks and maintenance recordsBasic plumbing duties including unblocking toilets and changing taps/washersMaintenance of pumps and motorsManage workload and site priorities independentlyProvide support with pricing for minor M&E works and projectsParticipate in call-out rota and respond to emergency breakdownsEnsure all works are completed in line with health & safety standardsPackage:Salary: Up to £52,000 per annum1 in 4 call-out (£120 standby)Plenty of overtime available25 days holiday (including birthday off and mental health day)Company pension schemeCareer progression opportunitiesRequirements:Electrically qualified – City & Guilds / NVQ Level 318th Edition Wiring RegulationsProven track record in commercial building maintenanceMulti-skilled across building servicesStrong communication and client-facing skillsAbility to work independently on a single-man siteMust be able to provide copies of trade certificatesPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
My client is looking for an experienced Manufacturing Engineer to join their expanding engineering team. As a multinational Electronics manufacturing company working with clients across multiple sectors, the individual will be responsible for developing, maintaining and improving our processes for quality improvements. In this role, you will monitor and maintain the manufacturing engineering issues and work closely with the engineering team through new product induction, supporting the implementation of new processes.
Key Responsibilities
Develop, maintain and improve the processes for quality improvements.
Monitor and maintain manufacturing engineering issues.
Work closely with the engineering team through new product induction.
Support the implementation of new processes.
Candidate Requirements
Knowledge of manufacturing methods and experience working in such environment.
Awareness of Quality Management Systems such as ISO 9001 and AS 9100.
Experience using CAD.
Knowledge of IPC 610 and IPC 620 standards.....Read more...
My client is looking for an experienced Manufacturing Engineer to join their expanding engineering team. As a multinational Electronics manufacturing company working with clients across multiple sectors, the individual will be responsible for developing, maintaining and improving our processes for quality improvements. In this role, you will monitor and maintain the manufacturing engineering issues and work closely with the engineering team through new product induction, supporting the implementation of new processes.
Key Responsibilities
Develop, maintain and improve the processes for quality improvements.
Monitor and maintain manufacturing engineering issues.
Work closely with the engineering team through new product induction.
Support the implementation of new processes.
Candidate Requirements
Knowledge of manufacturing methods and experience working in such environment.
Awareness of Quality Management Systems such as ISO 9001 and AS 9100.
Experience using CAD.
Knowledge of IPC 610 and IPC 620 standards.....Read more...
AV Installation Engineer - This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 2-4years high end residential audio visual experience. Ideally you will live in LONDON and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA lONDON....Read more...
AV Installation Engineer – This is a new role in today for a friendly bespoke AV systems integration company. They are very busy at the moment and are looking to add to the team a new experienced member that has at least 1-2years high end residential audio visual experience. Ideally you will live in SURREY and happy to work in a professional environment that delivers a first client service to a discerning end user client base. You will ideally be able to install both CRESTRON and Lutron Lighting Systems. Your hands on skills need to be really good and if you also have experience with IT Home Networking that would be of interest. The role comes with a vehicle the the ability to drive is needed. If you are interested in working for a company where you will be in a team and not just a number then please send me your fully technical CV that clearly shows your audio visual skills.AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL BESPOKE SMARTHOME AUTOMATION HOME CINEMA CONTROL4 RAKO SONOS LUTRON CRESTRON CI CUSTOM INSTALL INSTALLATION RACK NETWORKING WYRESTORM DRAYTEK CEDIA SURREY
....Read more...
Assist in maintaining our Kubernetes platform
Help migrate legacy services to modern containerised environments
Work with the team to build dashboards and alerting systems
Help engineers understand how their code performs
Develop internal tools that make it easier to troubleshoot
Develop internal tools that make it easier to deploy software
Participate in pair programming sessions and code reviews
Attend "blameless post-mortems" to understand why systems fail and how to make them better
Training:The course will be delivered on a day-release basis each week by Queen Mary University of London. The course will adhere to the following curriculum:
https://www.qmul.ac.uk/undergraduate/coursefinder/courses/2026/digital-and-technology-solutions-software-engineering/Training Outcome:Opportunity to convert to full time engineer after completing the program.Employer Description:Forter is a technology company that provides real-time fraud prevention and identity protection solutions for online businesses, helping them detect and block fraudulent transactions while improving customer experience.Working Hours :Monday to Friday, 9.00am - 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Analytical skills,Team working,Initiative....Read more...
Electrical Field Service Engineer (Scotland)
Location: Scotland
Sector: EV Infrastructure
Salary: £34-48,000 Plus Excellent Benefits
Job description
Holt Engineering is working with a dynamic, growing ICP and EV Infrastructure company who are looking for an Electrical Field Service Engineer to support their team in Scotland.
The Electrical Field Service Engineer will be responsible for the commissioning, maintenance and repair of AC chargers, Rapid DC, Ultra and High-Power Charging (HPC) EV charging infrastructure across sites throughout the UK.
This role is well suited to someone with a strong electrical background who is confident working independently and delivering high-quality technical support on site. You will play a key role in ensuring charging equipment operates safely, efficiently and to the highest standards expected by both clients and the wider business.
The position will involve working in a range of environments, including outdoor locations and confined spaces, with occasional travel and overnight stays required.
Essential
- NVQ Level 3 Electrical Qualification
- Minimum of 2 years experience in a field-based engineering role involving commissioning, maintenance or repair of electrical systems or equipment
- Proven ability to work independently on client sites and resolve technical issues without direct supervision
- Experience operating in SLA-driven environments
- Familiarity with test and measurement equipment such as multimeters and voltage testers
- Strong fault-finding skills with the ability to diagnose and repair complex technical issues
- Excellent communication and interpersonal skills for effective client interaction
- Strong time management skills, particularly when travelling between sites
- Full UK driving licence with no more than 6 penalty points
Desirable
- BS7671:2018 18th Edition Wiring Regulations
- City & Guilds 2391/2394 Testing and Inspection
- Previous experience in EV charging, renewable energy or power electronics
- EV charging certification or manufacturer-specific training
- Hands-on experience commissioning, maintaining and repairing Rapid DC, Ultra and HPC EV chargers
- Ability to read and interpret electrical schematics and technical manuals
- Understanding of analogue and digital electronics and associated components
- Awareness of electrical hazards and site-based health and safety requirements
Key responsibilities
- Work closely with Service Coordination and Operations teams to ensure accurate job completion records and timely follow-up on service reports
- Commission and configure AC and Rapid DC chargers at customer sites
- Carry out initial setup and testing to ensure correct operation and compliance with relevant industry standards
- Liaise with project management and installation teams to support smooth integration of charging infrastructure with client systems
- Maintain company tools, assets and test equipment in good working order, reporting defects promptly
- Perform planned and preventative maintenance on EV charging equipment to maximise performance and uptime
- Diagnose and troubleshoot technical issues, including electrical, mechanical and software-related faults
- Carry out diagnostic testing, firmware updates and calibration of EV chargers where required
- Replace faulty components and, where necessary, complete full charger replacements in line with manufacturer guidelines
- Provide on-site technical support and user guidance to clients on the operation of EV chargers
- Respond promptly to service requests and maintain clear communication with clients to ensure a high standard of customer service
- Accurately document repairs, maintenance activity and customer interactions within the service management system
- Comply with all safety regulations and internal policies while working in the field
- Ensure all commissioning and maintenance work is completed in line with local electrical codes and standards
- Take part in ongoing safety training and certification requirements
Benefits
- Structured career progression framework
- Company van and fuel card
- Overtime available
- 30 days annual leave, including company shutdown days
- Travel subsistence provided
- Company performance bonus
- BUPA healthcare after 6 months
- Salary sacrifice pension scheme with 8% total contribution
- Salary sacrifice EV car scheme and charger installation
- Salary sacrifice holiday purchase scheme of up to 5 additional days
- Additional benefits platform with access to a wide range of discounted benefits and services
- Long service awards ....Read more...
Electronic Test Equipment Calibration Engineer required to join a growing Calibration and Maintenance team for a defence company supporting Armed Forces to defending our freedom.
As part of an experienced team of Calibration and Maintenance Engineers you will support complex test platforms in the manufacture and test of missile systems by calibrating bespoke factory test equipment from DC to Microwave.
Requirements
Experience calibrating test equipment to component level.
Ability to work from specifications, handbooks and drawings to conduct appropriate measurements and repairs down to component level on electronic test equipment.
HNC, HND or higher qualification in Electrical or Electronics Engineering.
Responsibilities
Service Electrical and Electronic Test Equipment, including Special to Type Test Equipment STTE, work is extremely varied, interesting and challenging.
Support manufacturing across all stages of product assembly integration and test.
Resolve routine and nonroutine including calibrations, commissioning, drift analysis, fault finding and repair of test equipment.....Read more...
