Science Jobs Found 355 Jobs, Page 14 of 15 Pages Sort by:
NDT Engineering Technician Apprentice
NDT Engineering Technician Apprentice We are currently recruiting for Non-Destructive Testing (NDT) Engineering Technician Apprentice’s to work alongside our highly skilled and motivated site NDT team based at Hinkley Point C. Whilst working within the team you will also be completing a Level 2 apprenticeship and studying for three PCN Level 2 Qualifications. To ensure consideration you will have obtained a minimum of three GCSEs at grade C or above (grade 4 or above in the new grading system), including Maths and English. You will also need to demonstrate good eyesight (Jaeger 1), either aided or unaided. During the 30 month apprenticeship you will demonstrate competence in this science-based profession that requires competent Engineering Technicians to inspect materials, welds, components and plant to verify their integrity without rendering them unfit for further service. Main Responsibilities Attend Workshops and participate in as many learning opportunities as possible. Respecting and contributing toward the Health and Safety Culture.Maintain documented evidence for use in learning portfolio.Invest time and energy into self-study to support company provided learning opportunities. Act with integrity. Good timekeeping, communication and interpersonal skills. Perform duties as assigned by lead Technicians and Management.Flexible to work with other departments to gain knowledge and experience.Writing of NDT reports to a suitable standard detailing all areas of test, restrictions and results.Ensure that all work is performed efficiently and in a timely manner.HSEQ Responsibilities. It is mandatory that the incumbent is familiar with and follows the Company's Policy for Health, Safety, Environment and Quality and takes an active part in the compliance and improvement of the Management Systems to maintain our system certification. The incumbent must report any accidents, incidents, near misses, actual or potential problems with products, services or systems to the HSEQ Department Manager. The incumbent also has legal responsibilities under country-specific health and safety legislation to follow all Company policies, procedures, guidelines, control measures, signage and permit conditions and to know what to do in an emergency. The incumbent is also responsible for the health and safety arrangements of subordinates (if any) and for any persons visiting them while on the Company premises. GeneralThe above responsibilities are neither exclusive nor exhaustive and the incumbent may be called upon to carry out such other appropriate alternative or additional duties as may be required which are within their capability and competence.Training:Lavenders will deliver the apprenticeship standard Non-destructive testing (NDT) operator level 2. Functional skills English and Maths if required.Training Outcome:Fully qualified as a NDT Engineer.Employer Description:Bilfinger UK is a leading engineering and maintenance provider, supporting customers across the chemical & petrochemical, nuclear, oil & gas, pharmaceuticals & biopharma, power & energy, utilities, renewables and food & beverage markets. We enhance the efficiency of assets, ensuring a high level of availability and reducing maintenance costs. We have extensive experience in onshore and offshore facilities; specialising in asset management services throughout all life cycle phases from consulting, engineering, manufacturing, assembly, operations, maintenance, and decommissioning. This commitment is delivered by an experienced and highly competent workforce of over 4,500 employees operating from 14 offices in strategic industrial hubs, upholding the highest standards of safety, compliance and quality.Working Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Team working,Creative,Initiative ....Read more...
Supply Chain Apprentice
You will have the opportunity to gain experience on several key processes to create a well-rounded supply chain knowledge, including: Procurement process: From sourcing services &/or materials through to contract and supplier management, including policies and legislation. Learn and apply best practices in demand planning, scheduling, stock management, warehouse & distribution (Cash, distribution cost elements). Learn to forecast using machine learning software and reporting in Power BI to improve forecast accuracy. Collaborate with teams to ensure the smooth flow of products from raw material to finished modular buildings, ensuring we meet customer demands and regulatory requirements, underpinned by Health & Safety and quality. Use data to support decision making and recommend improvements (KPIs: inventory, forecast accuracy, plan attainment, customer service, supplier performance). Participate and coordinate projects related to cost & waste reduction and other improvement projects which will include exposure to continuous improvement principles. Document Standard operating procedures based on best practice.Training:You will be supported through a structured in-house development programme and a range of virtual classroom-based workshops supported by our learning provider. Throughout the duration of your apprenticeship, you will be appointed a workplace mentor to support you with your learning. Training Outcome:We have lots of fantastic success stories from previous apprentices who have gone on to achieve industry-recognised qualifications through their apprenticeships and many of our past apprentices are still working within the business today or have gone onto having successful careers elsewhere. Our workplace culture will allow you to pick up not only the knowledge and skills to be used in your future career but also experience working in a professional but relaxed environment that will give you the confidence to excel in your role and develop as a professional. We truly believe that we put our people at the heart of everything we do, and you will have the job security and development opportunities that are rare in the current climate, so why not join us, and be a part of our continuing growth and success? With exciting future ambitions, we couldn’t think of a better time for you to join us!Employer Description:As innovators in the science of building, we provide modular buildings for hire and sale, as well as supplying refurbished buildings and construction site accommodation. We deliver building solutions for organisations of any size, in sectors ranging from manufacturing, education and health to transport, utilities and construction. Portakabin employs more than 2,000 people across ten European countries with our head office and primary manufacturing facility located in York UK. As an equal opportunities employer, Portakabin is committed to the equal treatment of all current and prospective colleagues. We welcome applications from people of all backgrounds and perspectives and hire great people to build talented and diverse teams. We are committed to making reasonable adjustments throughout the application, recruitment, and onboarding processes for candidates that require additional support and/or adjustments to be made. If you are having any difficulty applying, please contact our recruitment team on resourcing@portakabin.comWorking Hours :Monday to Friday - 36.25 hours. We operate a flexible working approach, allowing start times from 7am - 10am and finish times from 2:30pm - 6:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Creative,Initiative ....Read more...
QHSSE Business Partner Marine Asset Integrity
Do you want to join our Geo-data revolution? Fugro’s global reach and unique knowledge will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build, and operate their assets more safely, sustainably, and efficiently. But we are always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative but work well within a team. The role As the QHSSE Business Partner you play a critical role in ensuring that project QHSSE resources are utilized effectively, projects are staffed appropriately, and organizational and business QHSSE objectives are met efficiently. You support and become familiar with the type of MAI activities performed to provide value adding advice and guidance related to QHSSE. As a QHSSE Business Partner, you will be responsible for overseeing and managing a pool of project QHSSE professionals across the MAI business line in Europe & Africa. Your role will involve collaborating with service line directors, project teams, providing guidance and support, and ensuring project compliance with HSSE regulations and company policies. You will serve as a key point of contact for QHSSE related matters and work closely with internal and external stakeholders to promote a culture of QHSSE excellence. Who we’re looking for: Proven and demonstrable ability to build and maintain relationships with key stakeholders, such as Service Line Managers and their teams to understand their needs, align resource allocation with organizational goals, and foster a productive and supportive work environment. Great leadership and management skills for our pool of project QHSSE professionals, providing guidance, coaching and performance feedback. You will develop and maintain a high-performing team by fostering a culture of collaboration, accountability, and continuous improvement. Ability to establish clear expectations, set goals and ensure the team is equipped with the necessary resources and training to succeed. Hold a bachelor's degree in environmental science, occupational health and safety or quality management. Demonstrated professional experience in a similar leadership role, demonstrating a track record of success in QHSSE management. In an Offshore, Oil & Gas, Energy environment. What we offer: Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you will be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So, bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team. Extensive career & training opportunities both nationally and internationally. Competitive salary accompanied by an attractive package including contributory pension scheme Flexible working hours and the potential to work 2 days a week from home in accordance with your manager and corporate policies. Option to lease an electric car. Apply for this ad Online! ....Read more...
Nuclear Degree Apprentice
The Nuclear Degree Apprenticeship Scheme recruits and develops A-Level/B-TEC qualified (or equivalent) individuals to become the next generation of nuclear engineers, scientists and inspectors. Nuclear Degree Apprentices will develop an understanding of working on Nuclear Licensed Sites, and the regulation of such, supporting the safe design, build, commissioning, operation and decommissioning of the civil nuclear industry including power generation. The Nuclear Degree Apprenticeship is a five-year programme, during which you will work towards the Level 6 Nuclear Scientist & Nuclear Engineer Standard. This involves an initial phase of engineering appreciation and awareness, followed by a series of exciting placements within areas such as nuclear integration, plant operation, maintenance, testing, commissioning and nuclear safety, inspection and regulation. Our Nuclear Degree Apprentices follow a set placement schedule, which will include placements with the different engineering and science specialisms that are needed to regulate the complex, complicated and hazardous nuclear industry. This will primarily be at our headquarters in Bootle. During the apprenticeship, you will be involved in a wide variety of tasks and have ample opportunity to develop technical knowledge and mature professional behaviours. These tasks could include: Specification and management of projects Individual research to update engineering good practice Assessing the adequacy of safety claims Inspecting operations or maintenance Being part of an investigation team This will build into a comprehensive portfolio of experiences to demonstrate the knowledge and competencies gained. You will also complete a BEng (Hons) Degree in Nuclear Engineering which runs for the duration of the apprenticeship and is fully funded by the organisation. Upon successful completion of the apprenticeship, you will have gained a BEng (Hons) Degree in Nuclear Engineering from Lancaster University. You will have also gained five years of experience within various technical specialisms related to the regulation of the civil nuclear industry. Opportunities for career progression within ONR are excellent subject to a formal employment offer being made. Upon completion of the degree during the 6th year you may be required to study for a master’s degree or undertake a 12-month placement in industry.Training:Nuclear Scientist and Nuclear Engineer (integrated degree)Level 6 (Degree with honours). Training Outcome:Upon successful completion of the Apprenticeship Programme there are development opportunities within the organisation to work towards becoming a Nuclear Inspector. Nuclear Inspectors are expected to be capable of undertaking a variety of roles: Inspecting sites Assessing technical safety cases Enforcing the law and influencing improvement in safety cases Investigating incidents Developing strategic approaches to secure high standards in the industry Managing nuclear research contracts etc. Some inspectors concentrate on undertaking planned and reactive inspections on site, while others will mainly assess safety submissions or manage discrete intervention projects. However, the focus is on working as teams to ensure compliance, reassure the public and improve safety standards.Employer Description:The Office for Nuclear Regulation is responsible for the regulation of nuclear safety and security across the UK. Their mission is to provide efficient and effective regulation of the nuclear industry, holding it to account on behalf of the public.Working Hours :Monday to Friday 9am to 5pm, to be discussed at interview stage.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Team working,Initiative ....Read more...
L4 Software Developer Apprentice – John Crane – Slough SL1 4LU– £22k
Our digital services team is now looking for an Apprentice to learn, train and assist them in developing and maintaining our internal John Crane software applications. This apprenticeship is designed to enable you to interpret design specs, build and test code, and deliver impactful software, contributing to innovative projects that enhance our business operations and our internal and external customer experiences. You will help drive the creation of computer programs, developing software solutions and working across the full software development life cycle, from research through to product retirement. Full training and support will be given so that you will be able to take on the following responsibilities: Responsibilities: Develop and maintain iProjects which is our internal web application Maintain existing Web/Desktop applications, John Crane has several legacy engineering applications, and the role will have the responsibility of maintaining them and redeveloping them Assist Engineering users with any Solid Edge issues (CAD software) Assist Operations/Engineering with any CAD/CAM issues Arrange and undertake Engineering software training and documentation Learning & Development: As part of this Level 4 Apprenticeship, you will study online with the Apprenticeship training provider LearnTech working towards a Level 4 Software Developer Apprenticeship standard. There may be the opportunity to progress onto a higher level of Apprenticeship upon completion You will learn to work with various software and online tools to be successful in your role: Solid Edge (CAD), Teamcenter, Web API, Visual Studio / JavaScript, SharePoint, VB.NET / VBA / WebForms, C# and SQL Server/mySQL You will also have the opportunity participate in various internal learning and trainings to develop your professional skills and confidence Technical Knowledge, Skills and Abilities: This apprenticeship is designed for individuals working as a junior developer, those who have 12 - 18 months of coding experience, strong A Levels, (including Computer Science) or a BTEC in IT, or have passed a Level 3 Software Development Technician apprenticeship Demonstrate technical aptitude Knowledge of Microsoft Office suite e.g Outlook, Word, Powerpoint, Excel Good written and oral communication skills Good attention to detail and organisation skills Ability to plan and meet deadlines Training:During this apprenticeship, you will follow a fully supported training programme with LearnTech, delivered through combined weekly remote classroom-based training, workplace assessment/training and online learning working towards completing the Level 4 Software Developer Standard. The training covers the following core occupational duties: https://www.instituteforapprenticeships.org/apprenticeship-standards/software-developer-v1-1Training Outcome: There is the possibiity to gain a full time role at the end of the apprenticeship, along with further learning and development opportunites with John Crane Employer Description:John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.Working Hours :Monday - Thursday, 8.30am - 5.00pm and Friday, 8.30am - 4.30pmSkills: Communication skills,IT skills,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Software experience,Clear passion for software ....Read more...
Data Scientist
Job Description: Our client, a leading financial services firm, has a fantastic opportunity for an experienced Data Scientist to join the team on a permanent basis. In this role you will be supporting the wider business in developing and deploying sophisticated models and analytical workflow, building upon the existing data engineering infrastructure to deliver reliable, high-performance analytics at scale. With strong communication skills you will work across a number of key internal stakeholders and provide effective solutions to meet emerging business needs. Skills/Experience: Experienced gained within a professional or financial services firm with proven skills in data science and machine learning methodologies (e.g., regression, classification, clustering, time-series analysis). Strong coding skills with expertise in Python, R and strong SQL Experience working with Microsoft Fabric or Databricks or equivalent Excellent written and verbal communication skills, able to translate complex analytical findings into actionable insights for both technical and non-technical stakeholders. Experience working in cross-functional teams, gathering requirements from business units, and explaining technical concepts effectively. Demonstrates creativity in applying new techniques or technologies to improve model accuracy, scalability, and maintainability. Embraces feedback loops to iterate on models, incorporating new data sources or refinements to maintain relevance and performance. Committed to ethical data use, respecting privacy, security, and compliance regulations. Familiarity with governance frameworks and best practices to ensure models meet organisational and legal standards. Core Responsibilities: Develop and deploy sophisticated models and analytical workflows within Microsoft Fabric, building upon the existing data engineering infrastructure to deliver reliable, high-performance analytics at scale. Provide clear, data-driven recommendations and predictive models that inform strategic decisions for end client services, external client engagement, optimisations, and operational efficiencies. Identify and quantify opportunities to reduce costs, streamline processes, or increase revenue, using advanced analytics to demonstrate tangible ROI and operational enhancements. Partner closely with product owners, data engineers, and business stakeholders to refine analytical goals, ensuring that insights are integrated into day-to-day operations and product roadmaps. Implement best practices for code management, versioning, and documentation, enabling continuous improvement and easier onboarding for future team members. Advocate for analytics and data-informed decision-making throughout the organisation, promoting the value of advanced models and ensuring that insights lead to meaningful business actions. Benefits: A highly competitive salary Wider Benefits package Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy. Job reference: 15961 To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006. At Core-Asset, we’re committed to protecting and respecting your privacy. Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure. We may change this policy from time to time, so please check this policy occasionally to ensure that you’re happy with any changes. By engaging with us (either by applying for a job we’re advertising, registering through our website, or getting in touch with our business) you’re agreeing to be bound by this policy. Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users. For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland. INDPERM ....Read more...
Data Engineer - Leading Pharmaceutical Company - Manchester
Data Engineer - Leading Pharmaceutical Company - Manchester (Tech Stack: Data Engineer, Databricks, Python, Power BI, AWS QuickSight, AWS, TSQL, ETL, Agile Methodologies) About the Role: We are seeking a talented and experienced Data Engineer on behalf of our client, a leading Software House. This is a fully remote position, offering the opportunity to work with cutting-edge technologies and contribute to exciting projects in a collaborative environment. About the Role: Our client is seeking an experienced Data Engineer to join their team in Manchester. This hybrid position involves working within the pharmaceutical industry, focusing on the design, development, and maintenance of data pipelines, ETL processes, and databases. The role is ideal for someone passionate about improving processes, ensuring data quality, and maintaining compliance with regulatory standards. focusing on designing, developing, and maintaining data pipelines, ETL processes, and databases. If you are passionate about driving continuous improvement and ensuring data quality and compliance, we want to hear from you. Key Responsibilities: Design, develop, maintain, and optimise data pipelines, ETL processes, and databases. Drive continuous improvement by refining processes, products, and identifying new tools, standards, and practices. Collaborate with teams across the business to define solutions, requirements, and testing approaches. Assist with process definition, ensuring compliance with organisational processes and regulatory standards. Ensure compliance with regulatory requirements and standards and audit readiness. Automate and monitor data and data processes, ensuring data quality and integrity. Share knowledge and provide guidance on databases and data. Maintain up-to-date, accurate, and concise documentation of database configurations and processes. Work across the team to deliver best practice infrastructure and infrastructure deployment and management processes. Essential Skills/Experience: A good degree in a relevant subject or equivalent professional experience in a data role. At least 3 years’ professional experience developing data pipelines and ETLs using Microsoft products. Minimum 1 year of experience working with cloud-native technologies like Azure Data Factory. Demonstrable experience of delivering technical work within time and budget constraints. Good understanding of data security best practices. Experience in supporting ETLs or data pipelines crucial to a production system. Experience working in a cross-functional team to deliver technical solutions. Desirable Skills: Experience with SQL Server, SSIS, Azure Data Factory, and Azure SQL. Experience with Cloud and Infrastructure as Code, particularly in an Azure setting using Bicep. Understanding of DevOps practices and the associated benefits. Skill in database testing including unit, performance, stress, and security testing. Experience working in an agile team. Experience working in a highly regulated industry and with highly sensitive data. Exposure to large data solutions like Snowflake, Trino, Synapse, Azure Data Lake, and Databricks. Experience in data science using R, Stata, or Python. Familiarity with Atlassian tools such as JIRA, Confluence, and BitBucket. Understanding of clinical trials, GCP, and GxP. What We Offer: Hybrid working model with flexibility between remote and office-based work. Competitive salary and benefits package. Opportunity to work on innovative projects within the pharmaceutical industry. Collaborative and supportive work environment. Professional development and career growth opportunities. Location: Remote Working UK Salary: £45,000 – £55,000 + Bonus + Pension + Benefits Applicants must be based in the UK and have the right to work in the UK even though remote work is available. To apply for this position please send your CV to Matt Jones at Noir. NOIRUKTECHREC NOIRUKREC NC/RG/DE ....Read more...
Business Development Manager - Renewable Energy
Job Title: Business Development Manager – C&I RenewablesLocation: Remote-based with attendance to the office monthly Company OverviewWe are working with a leading provider of C&I renewable energy solutions that focus on sustainable and innovative projects within the private and public sectors. As they continue to grow, they are seeking a talented and experienced Business Development Manager to join the team. This is an exciting opportunity to work in the renewable energy industry and contribute to the growth of Solar and BESS projects for a range of private and public sector clients across the UK. Role Overview As a Business Development Manager, you will play a pivotal role in identifying new business opportunities, building relationships, and driving the growth of Solar and BESS projects within the private and public sectors. You will be responsible for developing and executing strategic plans to win new contracts, expanding the current client base, and positioning the company as a leader in the renewable energy sector. The ideal candidate will have deep knowledge of both the public sector procurement landscape and the solar/BESS technologies, along with strong business development experience. Key Responsibilities Business Development Strategy: Lead the development and execution of business strategies to identify and secure new private and public sector opportunities.Client Relationship Management: Build and nurture strong relationships with key clients, including government departments, local authorities, and public utilities. Understand their energy needs and challenges, positioning solutions to meet their requirements.Market Research & Opportunity Identification: Conduct thorough market analysis to identify new business opportunities, including upcoming tenders, government incentives, and regulatory changes that may impact the solar/BESS sectors.Proposal Development & Support: Work closely with the bid and technical teams to develop tailored proposals and presentations that address the needs of the prospective client’s.Tender & Contract Negotiation: Manage the tender submission process, including liaising with internal teams to ensure all proposals are compliant, competitively priced, and aligned with the client’s expectations.Industry Networking & Events: Represent the company at industry events, conferences, and networking opportunities to build visibility and develop relationships with key stakeholders.Regulatory Knowledge: Stay up to date with the latest developments in renewable energy regulations, government policies, and funding schemes that impact public sector solar and BESS projects. Key Skills and Qualifications Proven experience in business development within the renewable energy sector, with a strong focus on Solar and Battery Energy Storage Systems (BESS).Strong relationship-building skills with the ability to engage and influence stakeholders at all levels within public sector organizations.Excellent negotiation skills with the ability to manage complex commercial and contractual discussions.Demonstrated success in generating new business opportunities, closing sales, and delivering revenue growth in the renewable energy industry.Strong understanding of the commercial and technical aspects of solar energy and BESS solutions.Ability to work independently and collaboratively within a cross-functional team, including bid writers, technical experts, and project managers.A degree in Business, Engineering, Renewable Energy, Environmental Science, or a related field, or equivalent experience. About UsClimate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know. ....Read more...
DevOps Engineer - FinTech - Newcastle
DevOps Engineer - FinTech - Newcastle (Tech stack: DevOps Engineer, Azure, Kubernetes, SQL Server, Snowflake, Jira, Bitbucket, Git, CI/CD, DevOps Engineer, Urgent) I’m recruiting on behalf of a leading FinTech company in Newcastle that is looking for a talented DevOps Engineer to join their growing team. This is a fantastic opportunity to work in a fast-paced, technology-driven environment where you’ll play a key role in enhancing automation, infrastructure, and deployment processes. Key Responsibilities: As a DevOps Engineer, you’ll be responsible for maintaining and improving the company’s infrastructure, automating deployment pipelines, and ensuring seamless operations across development and production environments. Your role will involve: Writing and maintaining scripts using PowerShell or other scripting languages. Developing with C#, Java, or Python, with either prior software development experience or the ability to code when needed. Implementing Infrastructure as Code (IaC) using tools like Ansible, Terraform, or equivalent. Managing containerization with Docker and orchestration using Kubernetes or Docker Swarm. Setting up and maintaining monitoring solutions such as ELK, Grafana, or similar. Managing CI/CD pipelines with TeamCity. Working with Microsoft SQL Server to ensure optimal database performance. Administering both Windows and Linux environments. Communicating clearly and professionally with both clients and internal teams. What They’re Looking For: Strong scripting skills with PowerShell or another scripting language. Hands-on experience with at least one programming language: C#, Java, or Python. Proven expertise in Infrastructure as Code using Ansible, Terraform, or similar tools. Solid experience with containerization (Docker) and orchestration (Kubernetes or Docker Swarm). Knowledge of monitoring tools such as ELK Stack, Grafana, or equivalent. Experience with CI/CD pipelines, particularly using TeamCity. Familiarity with Microsoft SQL Server. Experience administering both Windows and Linux systems. Strong communication skills, with the ability to engage professionally with both technical teams and clients. Financial Services experience is beneficial but not essential. A 2:1 or higher degree in Computer Science or a related field, ideally from a top-tier university. Preferred Experience (Nice to Have): Knowledge of Atlassian tools such as Bitbucket and JIRA. Experience with artifact storage solutions like Artifactory. Familiarity with Octopus Deploy. Understanding of static analysis tools such as SonarQube. Experience using Control-M for workload automation. Exposure to cloud platforms (Azure, AWS, or GCP). Experience working with VMware (vSphere) and SAN storage solutions. Why Join? This is a fantastic opportunity to work in an innovative FinTech company, where you’ll be empowered to bring new ideas, improve infrastructure, and drive automation. You’ll work with a talented team, using cutting-edge technologies to deliver high-impact solutions. Location: Newcastle, UK Salary: Competitive + Bonus + Pension + Benefits Applicants must be based in the UK and have the right to work in the UK even though remote working is available. To apply for this position please send your CV to Matt Jones at Noir. NOIRUKTECHREC NOIRUKREC NC/RG/DV ....Read more...
Quality Control Specialist - Commmercial Roofing
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: This role educates WTI personnel on proper product use and application, provides installation training on and off the roof, and oversees large self-performed projects from start to finish with intermittent inspections and post-completion inspections of smaller projects. The QCS will perform regular job site visits during the project and after project completion. The goal is to provide consistency across the country with proper roof repairs and application of our products. ESSENTIAL DUTIES AND RESPONSIBILITIES: Ensure proper execution and delivery of all WTI GS and GC self-performed roofing work. Provide a variety of technical and application training sessions in the field and in a shop setting. Provide hands-on application training and supervision of roof coatings and installation. Attend pre-con's on large projects. Be present at job start-ups to discuss the proper execution of the scope of work. Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice. Perform a pre-final inspection to ensure that the projects have a zero punch list. Perform final inspections when needed. Pre-project field inspections and technical support including but not limited to: Peel tests Product recommendations Proper product installations Post-project completion inspection to ensure quality workmanship and proper utilization and application of materials. Product diagnostic support to ensure that WTI is kept out of trouble in misuse of products for the situation. Perform roof inspections with written reports and photo documentation. Perform safety audits while on site to ensure all safety requirements are being met and consult with the safety team when necessary. Communicate professionally with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team. Complete daily reports, including DTAs, safety audits, truck audits, and QC inspection reports, as necessary and applicable. Complete weekly/monthly activity reports as requested. Support the region as needed when the weather conditions do not allow for your normal job responsibilities. Additional tasks as assigned by the manager. ABILITIES AND SKILLS: Working knowledge of commercial roofing systems, including built-up, modified, single-ply, and metal. Working knowledge of roof coating systems. Strong roofing or building science mechanical aptitude. Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems). In-depth technical understanding and extensive hands-on knowledge of applications of products. Intimate knowledge of our product line. Must be able to travel within assigned territory up to 75% of the time with overnight trips included. OTHER QUALIFICATIONS: 5+ years of roofing, roofing repair, troubleshooting, or field service experience. Prior experience in a field service leadership role. History of working in a field that required autonomy and self-motivation. Prior experience and demonstrates a strong work ethic and ability to multi-task. Must have a valid Driver's License and acceptable Motor Vehicle Record. The salary range for applicants in this position generally ranges between $72,000 and $90,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Quality Control Specialist - Commmercial Roofing
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: This role educates WTI personnel on proper product use and application, provides installation training on and off the roof, and oversees large self-performed projects from start to finish with intermittent inspections and post-completion inspections of smaller projects. The QCS will perform regular job site visits during the project and after project completion. The goal is to provide consistency across the country with proper roof repairs and application of our products. ESSENTIAL DUTIES AND RESPONSIBILITIES: Ensure proper execution and delivery of all WTI GS and GC self-performed roofing work. Provide a variety of technical and application training sessions in the field and in a shop setting. Provide hands-on application training and supervision of roof coatings and installation. Attend pre-con's on large projects. Be present at job start-ups to discuss the proper execution of the scope of work. Visit the projects at specific intervals to assess the completed work and provide any direction or corrective advice. Perform a pre-final inspection to ensure that the projects have a zero punch list. Perform final inspections when needed. Pre-project field inspections and technical support including but not limited to: Peel tests Product recommendations Proper product installations Post-project completion inspection to ensure quality workmanship and proper utilization and application of materials. Product diagnostic support to ensure that WTI is kept out of trouble in misuse of products for the situation. Perform roof inspections with written reports and photo documentation. Perform safety audits while on site to ensure all safety requirements are being met and consult with the safety team when necessary. Communicate professionally with our Technicians, Foremen, Supervisors, Field Operations Managers, Regional Business Managers, Corporate Staff, and the Sales Team. Complete daily reports, including DTAs, safety audits, truck audits, and QC inspection reports, as necessary and applicable. Complete weekly/monthly activity reports as requested. Support the region as needed when the weather conditions do not allow for your normal job responsibilities. Additional tasks as assigned by the manager. ABILITIES AND SKILLS: Working knowledge of commercial roofing systems, including built-up, modified, single-ply, and metal. Working knowledge of roof coating systems. Strong roofing or building science mechanical aptitude. Practical computer application literacy (including Microsoft Office Suite and learning the necessary internal business systems). In-depth technical understanding and extensive hands-on knowledge of applications of products. Intimate knowledge of our product line. Must be able to travel within assigned territory up to 75% of the time with overnight trips included. OTHER QUALIFICATIONS: 5+ years of roofing, roofing repair, troubleshooting, or field service experience. Prior experience in a field service leadership role. History of working in a field that required autonomy and self-motivation. Prior experience and demonstrates a strong work ethic and ability to multi-task. Must have a valid Driver's License and acceptable Motor Vehicle Record. The salary range for applicants in this position generally ranges between $72,000 and $90,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Demand Planning Manager
JOB DESCRIPTION Title: Demand Planning Manager Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you. Position Summary: Responsible for leading the demand planning function to ensure accurate and efficient forecasting of customer demand, supporting the company's inventory, production, and sales objectives. This role requires a combination of analytical expertise, cross-functional collaboration, and strategic thinking to drive optimal supply chain performance and enhance customer satisfaction. Essential Functions: Create and maintain accurate demand forecasts at various levels of aggregation over different time horizons. Analyze historical data, market trends, and customer inputs to improve forecast accuracy. Manage and refine statistical models and forecasting tools. Lead the demand planning process within the Sales and Operations Planning (S&OP) framework. Work closely with Sales, Marketing, Finance and Supply Chain teams to gather insights and align on forecast assumptions. Drive consensus meetings to reconcile variances between forecast and actual demand. Monitor forecast performance and key metrics, such as forecast accuracy and bias. Provide actionable insights and recommendations to address demand variability and trends. Develop and distribute demand planning reports to stakeholders. Continuously refine demand planning processes to improve efficiency and accuracy. Implement best practices and new tools to enhance forecasting capabilities. Train and mentor team members on demand planning methodologies and tools. Partner with Supply Chain, Finance, Sales and Operations teams to ensure alignment between demand forecasts and inventory or production plans. Communicate risks and opportunities effectively to senior management. Manage demand planning systems and tools, ensuring data accuracy and integration with ERP and other supply chain systems. Lead implementation of demand planning software upgrades or new tools. Perform additional duties as assigned. Commit to the Company's safety and quality programs. Perform additional duties as assigned. Commit to the Company's safety and quality programs. Requirements: Bachelor's degree in Supply Chain, Business Administration, Analytics, Data Science or a related field. At least 7 years of experience in demand planning, supply chain, or related areas. 2+ years in a leadership role. Previous experience with demand planning tools (e.g., SAP IBP, Kinaxis, Blue Yonder). Advanced skills in Excel, data visualization tools, and statistical forecasting methods. Preferred Skills, APICS Certification (e.g., CPIM, CSCP) or equivalent. Physical Requirements: This position routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. May require computer usage for anextended period of time - up to 8 hours in a day. This position requires minimal physical activity. May require lifting up to 50 lbs on occasion. What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Apprentice Electrical Technician
Our 3 Year Apprenticeship Programme will see you develop both technically and personally, with the majority of your first year spent at HETA training centre in Hull completing some of the following training: Foundational knowledge units including Engineering Mechanical & Electrical Science and Net Zero Sustainability Specialist Electrical training including: Electrical Wiring & Maintenance Programmable Logic Control Fluid Power 1 Day a week will be dedicated to the delivery of a BTEC Level 3 Extended Certificate in Engineering Once you’re equipped with your foundation knowledge, you’ll join us on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training, offering valuable insights into career paths at Perenco. Some of your activities on-site might look like the below: Carry out maintenance on all Electrical equipment to the relevant Preventative Maintenance Routines (PMR’s) in Maximo Carry out EX maintenance on all EX Electrical equipment Complete work orders clearly to a high standard, including as much relevant information as possible. Raise any necessary follow-ups in Maximo, including as much relevant information as possible Complete any required P forms for adding or removing maintenance to equipment Raise any necessary Work Control Certificates (WCC’s) for non-routine tasks, including level 2 WCC’s Raise any necessary Isolation Control Certificates (ICC’s) for both electrical tasks and tasks for other trades that require an isolation Produce switching procedures for any High Voltage (HV) switching Carry out switching including isolations and de-isolations of low and high-voltage electrical equipment Take part in planning and executing any work associated with the annual slowdowns/shutdown Training:Our Apprentices will undertake a Maintenance and Operations Engineering Technician, Level 3 (A level). This will include a full-time period of practical workshop-based ‘off-the-job’ training at HETA in Hull. You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend HETA one day a week over two academic years. After your initial training at HETA, you will be working towards your End-Point Assessment.Training Outcome:By the end of the apprentice programme, you’ll have developed your technical abilities as a qualified engineer, built your networks, and be on your way to further study with a varied career path ahead of you. We believe training apprentices is investing in the future of our business and we hope our Apprentices will want to stay with us and build a successful career. We’re a wide business with both onshore and offshore assets across the UK and encourage our people to explore all opportunities, so be bold and join us today!Employer Description:Perenco is a leading international independent hydrocarbon producer with operations globally across 15 countries. At Perenco we believe in sustainability. We recycle, we modernise and we redevelop in both mature and marginal oil and gas production, this means making the most of what already exists. We take on projects that others have left behind, doing better and producing longer. That was the vision of our founder Hubert Perrodo. Production is key and we believe the Oil and Gas industry plays a pivotal role in reaching Net Zero targets and energy transition. Perenco have committed to a climate strategy which focuses on decarbonising our production process, developing our sustainability offering and contributing to local energy transition in the countries where we operate. We offer apprenticeship across 3 of our onshore sites: Wytch Farm, Dorset. Bacton, Norfolk. Dimlington, Humberside.Working Hours :Initially apprentices will work Monday to Friday 37.5 hours per week when they join site. Once they are competent and have been allocated to a team they will move to shift working which is 7 days on, 7 days off, 12 hour shifts.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Drive & Determination ....Read more...
Calibration Technician Apprentice
Overview Calibration Technicians, work as individually or as a part of a team to ensure that the measuring equipment used by customers to manufacture, process or measure particular processes, to ensure that the equipment used is satisfactory to the required standards, and thus ensuring they produce a high quality product, using a process called calibration. Calibration is defined as “the documented comparison of the measurement device to a internationally recognized reference standard”. Calibration covers a multitude of different parameters including electrical instrumentation, pressure devices, torque tools, weighing equipment, dimensional measuring equipment and gauging and temperature measuring systems. The work is pre-dominantly in environmentally controlled laboratories, and use state of the art machinery, which is capable of measuring up to 0.000001mm. Typical customers are found in the following industries: Pharmaceutical, aerospace, oil and gas, automotive, power generation, food, process and chemical, electrical engineering and a wide variety of other industries You will be proactive in finding solutions to problems and identifying areas for improving the business. Specific Specialist Knowledge: Understand mathematical techniques, formula and calculations used in a technical support environment Understand the methods and techniques used to evaluate technical data and documentation Understand how to identify that the data and documentation being used is current and up to date Understand the requirements of the customer (internal/external) and support using the appropriate tools, equipment and processes Specific Specialist Skills: Produce calibration documentation that contains all the relevant and necessary data in accordance with company quality systems Record calibration data in the required format Ensure that all calibrations follows national/international standards Save and store technical documentation in the correct format, location in accordance with organisational and/or customer requirements Develop effective business and/or customer relationships Provide technical advice and guidance to others Contribute to the business by identifying possible opportunities for improving working practices, processes and/or procedures Training: Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence) – Technical Support Training Outcome:Full time position upon completion of apprenticeship.Employer Description:Tyneside Standards Limited was formed in 1995 at the behest of several eminent businessmen based in the Tyneside area who served on the board of Tyneside TEC. They were becoming increasingly frustrated at having to send their equipment to the Midlands and beyond to find the top class Calibration laboratories they sought for their instruments. Thus sending millions of pounds from the North East economy. So Tyneside Standards was created with the conception being to create a “Centre of Excellence” where Metrology “The Science Of Measurement” was available here in the North East servicing the requirements of Northern Industry and restricting the flow of work leaving the area. Since the formation in 1995 Tyneside Standards has operated with the same ethos Top class calibrations without compromise! Therefore our first objective when we set up the laboratory was obtaining UKAS accreditation so that we may provide the top class calibrations the businessmen of the North East sought with a certificate bearing the Crown Which renders it a legal document We achieved this distinction within two years of our formation. Our accreditation was in the Mechanical Dimensional area however very soon we achieved accreditation in the Electrical field before adding Torque, Pressure, Temperature and Mass to our scope of accreditation to supplement our vast scope we have added on site calibrations for Surface Plates, Optical Projectors, and Pressure Gauging. Swift service and high integrity is the strategy we have employed over the years,making sure we provide the client with a service tailored to suit their requirements. We have grown in stature each year by reinvesting profits in the building, on machinery of the highest accuracy and state of the art software. Whilst we always regard training as the most sound investment of any business. We have achieved our growth by reputation and recommendation. Never having employed a salesman or company representative in order to keep the cost of our customers calibrations at a minimum and everyday contact with those at the helm of the business.Working Hours :Monday - Friday 8.00am - 4.30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Team working,Initiative ....Read more...
Apprentice Mechanical Technician
Our 3 Year Apprenticeship Programme will see you develop both technically and personally, with the majority of your first year spent at HETA training centre in Hull completing some of the following training: Foundational knowledge units including Engineering Mechanical & Electrical Science and Net Zero Sustainability Specialist Mechanical training including: Mechanical Maintenance Bench Fitting Fluid Power 1-day a week will be dedicated to the delivery of a BTEC Level 3 Extended Certificate in Engineering Once you’re equipped with your foundation knowledge, you’ll join us on-site for Year 2 and 3 where you’ll work alongside our teams and start gaining valuable hands-on experience and training to further your understanding and start applying what you’ve learnt. You’ll be assigned a mentor, who will oversee your development and training, offering valuable insights into career paths at Perenco. Some of your activities on-site might look like the below: Complete scheduled trade maintenance activities as per the maintenance management system Maintenance to be completed using the company standards and procedures, minimising impact on production, and maximising plant availability Raise relevant permits within the agreed time frame and generate new work requests to highlight plant and equipment failure Manage and maintain Trade inventory of critical spares and stock equipment such that maintenance visits can be completed on schedule and equipment down time is minimised Supporting project activity and working with vendors and sub-contractors as required Develop and review operational and maintenance procedures Comply with and pursue requirements of Change Management Policies e.g., Plant Modification Proposals Employ Perenco Observation Safety Techniques (POST) to report unsafe acts Training:Our Apprentices will undertake a Maintenance and Operations Engineering Technician, Level 3 (A level). This will include a full-time period of practical workshop based ‘off-the-job’ training at HETA in Hull. You will also begin a technical certificate (depending on your prior attainments) where you will be required to attend HETA one day a week over two academic years. After your initial training at HETA, you will be working towards your End Point Assessment.Training Outcome:By the end of the apprentice programme, you’ll have developed your technical abilities as a qualified engineer, built your networks, and be on your way with further study with a varied career path ahead of you. We believe training Apprentices is investing in the future of our business and we hope our Apprentices will want to stay with us and build a successful career. We’re a wide business with both Onshore and Offshore assets across the UK and encourage our people to explore all opportunities, so be bold and join us today!Employer Description:Perenco is a leading international independent hydrocarbon producer with operations globally across 15 countries. At Perenco we believe in sustainability. We recycle, we modernise and we redevelop in both mature and marginal oil and gas production, this means making the most of what already exists. We take on projects that others have left behind, doing better and producing longer. That was the vision of our founder Hubert Perrodo. Production is key and we believe the Oil and Gas industry plays a pivotal role in reaching Net Zero targets and energy transition. Perenco have committed to a climate strategy which focuses on decarbonising our production process, developing our sustainability offering and contributing to local energy transition in the countries where we operate. We offer apprenticeship across 3 of our onshore sites: Wytch Farm, Dorset. Bacton, Norfolk. Dimlington, Humberside.Working Hours :Initially apprentices will work Monday to Friday 37.5 hours per week when they join site. Once they are competent and have been allocated to a team, they will move to shift working which is 7 days on, 7 days off, 12-hour shifts.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Drive & Determination ....Read more...
Level 6 Digital and Technology Solutions Degree Apprenticeship – Software Engineering with Data
Software Engineering pathway: Software is a key component of our future cars as the technology in vehicles continues to increase to meet customers’ evolving needs. Before the customer enters the car, technology identifies the key fob and their phone to recognise them and allow access; during their journey, software aids their driving with stability and assistance systems and provides a welcoming and refined user experience through in-vehicle infotainment. In short, software gives us our edge. It makes our thinking come alive in the real world. This pathway will show you how to design, build and test ground-breaking software that really delivers. You’ll also learn how to integrate engineering principles that deliver superior analysis, development and built-in security Engineering Propulsion (EP)- Whitley, Gaydon. Our Propulsion Engineering team are leaders in the design, test, validation and certification of world-class propulsion systems aimed at delivering driving experiences that our customers will love for life. The scope of our propulsion systems is far-reaching and includes major commodity groups such as electric drive units, energy storage devices, engines, transmissions and drivelines, complemented by software system integration, calibration and control strategies The Propulsion software engineering and data teams are made up of a diverse set of skill sets ranging from control systems engineering, calibration engineering, integration engineering, data analytics and data science to project management. As such you will get the opportunity to work with and learn from a wide variety of perspectives, whilst developing skills related to using vehicle modelling, vehicle testing and simulation using tools such as Java, Phyton, C++ and Tableau to solve real-world engineering problems whilst focusing on developing data skills critical to our business Training:During your apprenticeship, you’ll gain valuable hands-on experience and career-building skills while working at the forefront of the automotive industry. This exciting programme is designed to help you build practical skills, deepen your foundational knowledge, and develop essential business behaviours such as teamwork and problem-solving. And you’ll be supported by a JLR early careers cohort leader, the university team, and your line manager every step of the way. You’ll achieve a BSc (Hons) degree in Digital and Technology Solutions developed in conjunction with the University of Warwick. For more details on the degree course, please visit: https://warwick.ac.uk/fac/sci/wmg/study/degree-apprenticeships/digital-technology-solutions/ Year 1 - 2 - This programme is delivered through a combination of online study, face-to-face lectures, independent learning each week. This gives you the chance to apply your learning from University of Warwick to projects in a real-world environment. You’ll study a range of modules designed to build your essential knowledge, skills and behaviours, with regular process reviews along to way to ensure you’re getting the support you need from your tutors and line manager. Years 3 - 4 - In years 3 and 4 you will complete modules related to your chosen specialism - Software Engineering with Data. In your final year, you’ll complete a work-based project as part of your End Point Assessment (EPA). This is an opportunity for you to use the skills and experience you gained throughout your time on the programme and apply them directly to your role. And when you’ve successfully completed your EPA, you’ll achieve your Level 6 Apprenticeship and taking on new responsibilities and making a meaningful impact within the business. Throughout your apprenticeship you will work in our Engineering Propulsion (EP) team.Training Outcome:Upon completion of the apprenticeship, you will move into a substantive position within the business.Employer Description:LIVE THE EXCEPTIONAL WITH SOUL We are the proud creators. The curious minds. Inspired to create unique vehicles, to realise our vision of modern luxury. We work as one. Shaping the future. Motivated by a love for our customer. United by a deep admiration for each other. Our sense of integrity and our spirit of excellent empowers us. Our ambition to grow. Our passion to chart new landscapes of innovation, encourages us to dream. It’s what drives us. To be visionaries. To be creators.Working Hours :Monday - Friday. Working hours to be confirmed.Skills: Interest in Software ....Read more...
Contractor Support Specialist
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better. Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Tremco is looking for a Contractor Support Specialist to cover the Southeast Pennsylvania area. The Contractor Support Specialist is a sales and support role, designed to generate contractor discretionary business in a specific area while providing localized technical support. The CSS personnel will work directly alongside the contractors, focused on the restoration coatings line, to ensure that Tremco and the contractor are providing the best solutions, the best products and the best installations to our customers. Duties/Responsibilities, Core knowledge: * Ensure safe execution and delivery of all roofing services and operations. * Provide a variety of technical training sessions in the contractor's office and field applications. * Provide hands on application training and supervision of roof coatings and installation. * Perform roof inspections reports with written reports on condition analysis, photo documentation, recommendation and material budget estimates. * Communicate professionally with our customers, Tremco sales representatives and regional sales managers and corporate staff. * Complete weekly/monthly reports, sales activities, proposals and purchase orders. * Travel within the assigned territory, complete expense reports on a timely basis. * Pre-project field inspections and technical support including but not limited to: * Peel tests * Product recommendations * Proper product installation * Product diagnostic support to ensure the contractor is kept out of trouble in misuse of products for the situation. * Provide an on-going sales support, training and development to the contractors, per the direction of the local sales reps. * Be a direct line of contact to the contractors in the designated area, per the local sales reps, to maintain a good working relationship with the existing contractor base, keeping them informed and trained on Tremco s product line and new products introduced. * Develop new contractors in the area, per the local sales team, by training on product systems and their usage. Skills, Qualifications, Experience, Special Physical Requirements: * High School diploma or GED * Associate s degree (AAS), or Trade School Certification, or Bachelor s Degree (BS) preferred. * 5+ years of roofing sales or technical experience in the commercial market. * 2+ years of roofing repair, troubleshooting, or field service experience. * Working knowledge of commercial roofing systems including built-up, modified, single ply, and metal systems. * Must have a valid drivers license and acceptable Motor Vehicle record. * Class B CDL driver s license. * Strong roofing or building science mechanical aptitude. * Prior experience in a field sales and service leadership role. * Practical computer application literacy (including Microsoft Office Suite and learn internal business systems). * In-depth technical understanding and extensive hands-on knowledge of applications of products. Intimate knowledge of product line. * History of working in a field that required autonomy and self-motivation. * Prior experience that demonstrates a strong work ethic and ability to multi-task. * Overnight travel of up to 25% to support assigned customer accounts. The salary range for applicants in this position generally ranges between $60,000 and $70,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, Company Pension Plan, Performance Based Commission, and continuing education.Apply for this ad Online! ....Read more...
Digital & Technology Solutions - Software Specialism Level 6 Apprentice - Manchester
We’re one of the world’s leading communication services companies. The services we sell are integral to modern life and are delivered over our networks. These networks are becoming ever increasingly dependent upon software, along with the products and services delivered over these networks. To continue innovating, we need you and your new ways of thinking to help us create amazing products for our customers. We’ll teach you human centred design, and agile ways of working, to help you create new technology and software solutions for the future. You'll be joining a specialist security team that is a trusted partner to governments worldwide, protecting critical national infrastructure and committed to the safety and security of our nation and global communities. Our mission focused work is innovative, inspiring and technologically challenging in a way that makes every day different and stimulating. We provide the opportunity to work on rare projects, with exciting tools and brilliant people. Everyone has access to unparalleled professional and personal development opportunities and your contribution is always valued. With incredible opportunities to learn, develop and gore your skills, we’ll invest in you and nurture your potential. Because of the sensitive nature of the high security work you will be doing, you will need to go through additional personnel screening and Government DV Security clearance. https://www.gov.uk/government/publications/united-kingdom-security-vetting-clearance-levels/national-security-vetting-clearance-levels An allowance of £5k per annum made payable monthly may be paid while you hold DV and continue to work in a role that requires DV. The terms of this allowance will be made available if you are successful in being recruited for this role. Our projects cover a wide range of skills, technologies, and platforms, touching software development, data processing, data analysis, visualisation, cloud and test automation. Day to day you will be designing, creating and testing brand new concepts in security software for customers both in the UK and overseas, anything from mobile apps to large data processing or cloud-based systems. You will learn Python, C++, C#, Objective–C or Java/JavaScript frameworks depending on your project area, as well as gaining an in-depth understanding of the software development lifecycle. If you’re not proficient in any of these, don't worry we will help develop your skills but please bring a passion to solve problems through the application of science and technology. Part of your role will also be researching cutting edge software solutions and working with specialists to innovate and stay ahead of the tech curve. Training:You’ll study for a Digital & Technology Solutions Level 6 Apprenticeship with Software Specialism. This is an apprenticeship degree course, meaning if you complete the course successfully, you’ll receive a degree from one of our university partners. The degree course runs for four years and is a work-based learning degree, with block release attendance onsite at the University. You’ll spend a minimum of 20% of your time learning and studying. Training Outcome:Once you have finished your apprenticeship you will be a fully qualified Software Engineer / Software Developer within BT Group.Employer Description:You’re not just looking for a career, you’re looking to make a difference. Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security. From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating. This is your chance to make a real difference to the world. Grab it.Working Hours :Monday to Friday 9am to 5pm with some flexibility. 3 days per week in the office.Skills: IT skills,Organisation skills,Problem solving skills,Logical ....Read more...
Contractor Support Specialist
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better. Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Tremco is looking for a Contractor Support Specialist to support our Southern Atlantic region. The Contractor Support Specialist is a sales and support role, designed to generate contractor discretionary business in a specific area while providing localized technical support. The CSS personnel will work directly alongside the contractors, focused on the restoration coatings line, to ensure that Tremco and the contractor are providing the best solutions, the best products and the best installations to our customers. Duties/Responsibilities, Core knowledge: * Ensure safe execution and delivery of all roofing services and operations. * Provide a variety of technical training sessions in the contractor's office and field applications. * Provide hands on application training and supervision of roof coatings and installation. * Perform roof inspections reports with written reports on condition analysis, photo documentation, recommendation and material budget estimates. * Communicate professionally with our customers, Tremco sales representatives and regional sales managers and corporate staff. * Complete weekly/monthly reports, sales activities, proposals and purchase orders. * Travel within the assigned territory, complete expense reports on a timely basis. * Pre-project field inspections and technical support including but not limited to: * Peel tests * Product recommendations * Proper product installation * Product diagnostic support to ensure the contractor is kept out of trouble in misuse of products for the situation. * Provide an on-going sales support, training and development to the contractors, per the direction of the local sales reps. * Be a direct line of contact to the contractors in the designated area, per the local sales reps, to maintain a good working relationship with the existing contractor base, keeping them informed and trained on Tremco s product line and new products introduced. * Develop new contractors in the area, per the local sales team, by training on product systems and their usage. Skills, Qualifications, Experience, Special Physical Requirements: * High School diploma or GED * Associate s degree (AAS), or Trade School Certification, or Bachelor s Degree (BS) preferred. * 5+ years of roofing sales or technical experience in the commercial market. * 2+ years of roofing repair, troubleshooting, or field service experience. * Working knowledge of commercial roofing systems including built-up, modified, single ply, and metal systems. * Must have a valid drivers license and acceptable Motor Vehicle record. * Class B CDL driver s license. * Strong roofing or building science mechanical aptitude. * Prior experience in a field sales and service leadership role. * Practical computer application literacy (including Microsoft Office Suite and learn internal business systems). * In-depth technical understanding and extensive hands-on knowledge of applications of products. Intimate knowledge of product line. * History of working in a field that required autonomy and self-motivation. * Prior experience that demonstrates a strong work ethic and ability to multi-task. * Overnight travel of up to 25% to support assigned customer accounts. The salary range for applicants in this position generally ranges between $60,000 and $70,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, Company Pension Plan, Performance Based Commission, and continuing education.Apply for this ad Online! ....Read more...
Digital & Technology Solutions - Software Specialism Level 6 Apprentice - Ipswich
We’re one of the world’s leading communication services companies. The services we sell are integral to modern life and are delivered over our networks. These networks are becoming ever increasingly dependent upon software, along with the products and services delivered over these networks. To continue innovating, we need you and your new ways of thinking to help us create amazing products for our customers. We’ll teach you human centred design, and agile ways of working, to help you create new technology and software solutions for the future. You'll be joining a specialist security team that is a trusted partner to governments worldwide, protecting critical national infrastructure and committed to the safety and security of our nation and global communities. Our mission focused work is innovative, inspiring and technologically challenging in a way that makes every day different and stimulating. We provide the opportunity to work on rare projects, with exciting tools and brilliant people. Everyone has access to unparalleled professional and personal development opportunities and your contribution is always valued. With incredible opportunities to learn, develop and gore your skills, we’ll invest in you and nurture your potential. Because of the sensitive nature of the high security work you will be doing, you will need to go through additional personnel screening and Government DV Security clearance. https://www.gov.uk/government/publications/united-kingdom-security-vetting-clearance-levels/national-security-vetting-clearance-levels An allowance of £5k per annum made payable monthly may be paid while you hold DV and continue to work in a role that requires DV. The terms of this allowance will be made available if you are successful in being recruited for this role. Our projects cover a wide range of skills, technologies, and platforms, touching software development, data processing, data analysis, visualisation, cloud and test automation. Day to day you will be designing, creating and testing brand new concepts in security software for customers both in the UK and overseas, anything from mobile apps to large data processing or cloud-based systems. You will learn Python, C++, C#, Objective–C or Java/JavaScript frameworks depending on your project area, as well as gaining an in-depth understanding of the software development lifecycle. If you’re not proficient in any of these, don't worry we will help develop your skills but please bring a passion to solve problems through the application of science and technology. Part of your role will also be researching cutting edge software solutions and working with specialists to innovate and stay ahead of the tech curve. Training:You’ll study for a Digital & Technology Solutions Level 6 Apprenticeship with Software Specialism. This is an apprenticeship degree course, meaning if you complete the course successfully, you’ll receive a degree from one of our university partners. The degree course runs for four years and is a work-based learning degree, with block release attendance onsite at the University You’ll spend a minimum of 20% of your time learning and studying. Training Outcome: Once you have finished your apprenticeship you will be a fully qualified Software Engineer / Software Developer within BT Group. Employer Description:You’re not just looking for a career, you’re looking to make a difference. Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security. From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating. This is your chance to make a real difference to the world. Grab it.Working Hours :Monday to Friday 9am to 5pm with some flexibility. 3 days per week in the office.Skills: IT skills,Organisation skills,Problem solving skills,Logical ....Read more...
Contractor Support Specialist
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better. Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Tremco is looking for a Contractor Support Specialist to support our Southern Atlantic region. The Contractor Support Specialist is a sales and support role, designed to generate contractor discretionary business in a specific area while providing localized technical support. The CSS personnel will work directly alongside the contractors, focused on the restoration coatings line, to ensure that Tremco and the contractor are providing the best solutions, the best products and the best installations to our customers. Duties/Responsibilities, Core knowledge: * Ensure safe execution and delivery of all roofing services and operations. * Provide a variety of technical training sessions in the contractor's office and field applications. * Provide hands on application training and supervision of roof coatings and installation. * Perform roof inspections reports with written reports on condition analysis, photo documentation, recommendation and material budget estimates. * Communicate professionally with our customers, Tremco sales representatives and regional sales managers and corporate staff. * Complete weekly/monthly reports, sales activities, proposals and purchase orders. * Travel within the assigned territory, complete expense reports on a timely basis. * Pre-project field inspections and technical support including but not limited to: * Peel tests * Product recommendations * Proper product installation * Product diagnostic support to ensure the contractor is kept out of trouble in misuse of products for the situation. * Provide an on-going sales support, training and development to the contractors, per the direction of the local sales reps. * Be a direct line of contact to the contractors in the designated area, per the local sales reps, to maintain a good working relationship with the existing contractor base, keeping them informed and trained on Tremco s product line and new products introduced. * Develop new contractors in the area, per the local sales team, by training on product systems and their usage. Skills, Qualifications, Experience, Special Physical Requirements: * High School diploma or GED * Associate s degree (AAS), or Trade School Certification, or Bachelor s Degree (BS) preferred. * 5+ years of roofing sales or technical experience in the commercial market. * 2+ years of roofing repair, troubleshooting, or field service experience. * Working knowledge of commercial roofing systems including built-up, modified, single ply, and metal systems. * Must have a valid drivers license and acceptable Motor Vehicle record. * Class B CDL driver s license. * Strong roofing or building science mechanical aptitude. * Prior experience in a field sales and service leadership role. * Practical computer application literacy (including Microsoft Office Suite and learn internal business systems). * In-depth technical understanding and extensive hands-on knowledge of applications of products. Intimate knowledge of product line. * History of working in a field that required autonomy and self-motivation. * Prior experience that demonstrates a strong work ethic and ability to multi-task. * Overnight travel of up to 25% to support assigned customer accounts. The salary range for applicants in this position generally ranges between $60,000 and $70,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, Company Pension Plan, Performance Based Commission, and continuing education.Apply for this ad Online! ....Read more...
Apprentice Early Years Teaching Assistant
Each day will be different, and you will spend time working in Foundation stage and in Key Stage. However, the main duties will remain the same and you will receive training and support to enable you to assist in carrying out the following: Support for pupils: Supervise and provide particular support for pupils, including those with special needs, ensuring their safety and access to learning activities Assist with the development and implementation of Individual Education/Behaviour Plans and Personal Care programmes including the delivery of interventions Establish constructive relationships with pupils and interact with them according to individual needs Promote the inclusion and acceptance of all pupils Encourage pupils to interact with others and engage in activities led by the teacher Set challenging and demanding expectations and promote self-esteem and independence Provide feedback to pupils in relation to progress and achievement under guidance of the teacher Support for the teacher: Create and maintain a purposeful, orderly, and supportive environment, in accordance with lesson plans and assist with the display of pupils’ work Use strategies, in liaison with the teacher, to support pupils to achieve learning goals Assist with the planning of learning activities Monitor pupils’ responses to learning activities and accurately record achievement/progress as directed Provide detailed and regular feedback to teachers on pupils’ achievement, progress, problems, etc. Promote good pupil behaviour, dealing promptly with conflict and incidents in line with established policy and encourage pupils to take responsibility for their own behaviour Establish constructive relationships with parents/carers Undertake marking of pupils’ work Provide clerical/admin support e.g. photocopying, typing, filing Support for the curriculum: Undertake structured and agreed learning activities/teaching programmes, adjusting activities according to pupil responses Undertake programmes linked to local and national curriculums Support the use of ICT in learning activities and develop pupils’ competence and independence in its use Prepare, maintain, and use equipment/resources required to meet the lesson plans/relevant learning activity and assist pupils in their use Support for the school: Be aware of and comply with policies and procedures relating to child protection, health, safety and security, confidentiality, and data protection, reporting all concerns to an appropriate person/use of CPOMS Be aware of and support difference and ensure all pupils have equal access to opportunities to learn and develop Contribute to the overall ethos/work/aims of the school Appreciate and support the role of other professionals Attend and participate in relevant meetings as required Participate in training and other learning activities and performance development as required Assist with the supervision of pupils out of lesson times, including before and after school and at lunchtime Accompany teaching staff and pupils on visits, trips and out of school activities as required and take responsibility for a group under the supervision of the teacher Any other related duties as may arise Training:Teaching Assistant Level 3.Training Outcome:On successful completion of the apprenticeship, the candidate may have the opportunity to apply for a permanent role should a vacancy arise.Employer Description:Holt House Infants School is a city school in a rural setting with an inspiring learning environment. We provide a secure and happy learning environment for the children in our care. We are committed to providing the best quality education and have high expectations of children, staff and parents. We are creative and innovative and provide many opportunities for children to practise their basic skills while enriching the curriculum by linking literacy and numeracy to the arts, science and the other foundation subjects.Working Hours :(6.5 hours per day) 8.30am - 3.30pm Monday - Friday.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Administrative skills,Number skills,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness ....Read more...
Store Apprentice
Ensure compliance relevant Health and Safety practices and all applicable legislation to encourage and maintain zero harm environment and culture. Assist with reviewing, analysing and recording costs of materials purchased, including cross hires and third party hiring. Ensure reused fittings and materials are utilised as a priority without compromising quality. Assist with the receipt/dispatch and accounting of all materials adhering to full compliance to the Company operating procedures in relation to ordering materials, issuing materials, booking out materials and overall stock accuracy. Support in maintaining the stock area to an acceptable and organised standard, ensuring all material storage areas and walkways are clean, tidy and unobstructed, and stock checks are carried out as per the schedule set by SAP. Assist in maintaining optimum stock levels as agreed by the Service Manager/Supervisor in conjunction with Materials Requisition Planning. Ensure that all materials required are ordered, tracked and available in a timely manner to meet our delivery requirements. Define the requirements of an order/service request to ensure materials are supplied within any agreed timescales, from reading and understanding drawing specifications. Learn how to ensure all plant, tools and equipment are fully compliant regarding PAT testing and Health and Safety protocols, they are maintained in order to maximise their use and prolonged life, issue and monitor use of power tools and equipment by operatives and sub-contractors. Provide and maintain an adequate supply of PPE for the workforce, ensure allocation of PPE to operatives is justified and controlled. Be thorough in the separation and segregation of waste to meet environmental requirements. Ensure that all relevant safety equipment is correctly labelled and routine insurance inspections are organised and controlled.Training: During the 2 year programme you will gain valuable experience, working alongside your colleagues and getting experience by learning on the job to develop your skills. Your apprentice programme will be delivered through a blended learning approach supported by our learning provider. You will report to the Service Manager and have various channels of support including a mentor. Training Outcome: We have lots of fantastic success stories from previous apprentices who have gone on to achieve industry-recognised qualifications through their apprenticeships and many of our past apprentices are still working within the business today or have gone onto have successful careers elsewhere. Our workplace culture will allow you to pick up not only the knowledge and skills to be used in your future career but also experience working in a professional but relaxed environment that will give you the confidence to excel in your role and develop as a professional. We truly believe that we put our people at the heart of everything we do, and you will have the job security and development opportunities that are rare in the current climate, so why not join us, and be a part of our continuing growth and success? With exciting future ambitions, we couldn’t think of a better time for you to join us! Employer Description:As innovators in the science of building, we provide modular buildings for hire and sale, as well as supplying refurbished buildings and construction site accommodation. We deliver building solutions for organisations of any size, in sectors ranging from manufacturing, education and health to transport, utilities and construction. Portakabin employs more than 2,000 people across ten European countries with our head office and primary manufacturing facility located in York UK. As an equal opportunities employer, Portakabin is committed to the equal treatment of all current and prospective colleagues. We welcome applications from people of all backgrounds and perspectives and hire great people to build talented and diverse teams. We are committed to making reasonable adjustments throughout the application, recruitment, and onboarding processes for candidates that require additional support and/or adjustments to be made. If you are having any difficulty applying, please contact our recruitment team on resourcing@portakabin.comWorking Hours :Monday - Thursday - 07.45 - 16.30 (inclusive of lunch breaks) Friday - 07.45 - 15.30 (inclusive of lunch).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative ....Read more...
Digital & Technology Solutions - Software Specialism Level 6 Apprentice - London
We’re one of the world’s leading communication services companies. The services we sell are integral to modern life and are delivered over our networks. These networks are becoming ever increasingly dependent upon software, along with the products and services delivered over these networks. To continue innovating, we need you and your new ways of thinking to help us create amazing products for our customers. We’ll teach you human centred design, and agile ways of working, to help you create new technology and software solutions for the future. You'll be joining a specialist security team that is a trusted partner to governments worldwide, protecting critical national infrastructure and committed to the safety and security of our nation and global communities. Our mission focused work is innovative, inspiring and technologically challenging in a way that makes every day different and stimulating. We provide the opportunity to work on rare projects, with exciting tools and brilliant people. Everyone has access to unparalleled professional and personal development opportunities and your contribution is always valued. With incredible opportunities to learn, develop and gore your skills, we’ll invest in you and nurture your potential. Because of the sensitive nature of the high security work you will be doing, you will need to go through additional personnel screening and Government DV Security clearance. https://www.gov.uk/government/publications/united-kingdom-security-vetting-clearance-levels/national-security-vetting-clearance-levels An allowance of £5k per annum made payable monthly may be paid while you hold DV and continue to work in a role that requires DV. The terms of this allowance will be made available if you are successful in being recruited for this role. Our projects cover a wide range of skills, technologies, and platforms, touching software development, data processing, data analysis, visualisation, cloud and test automation. Day to day you will be designing, creating and testing brand new concepts in security software for customers both in the UK and overseas, anything from mobile apps to large data processing or cloud-based systems. You will learn Python, C++, C#, Objective–C or Java/JavaScript frameworks depending on your project area, as well as gaining an in-depth understanding of the software development lifecycle. If you’re not proficient in any of these, don't worry we will help develop your skills but please bring a passion to solve problems through the application of science and technology. Part of your role will also be researching cutting edge software solutions and working with specialists to innovate and stay ahead of the tech curve. Training:You’ll study for a Digital & Technology Solutions Level 6 Apprenticeship with Software Specialism. This is an apprenticeship degree course, meaning if you complete the course successfully, you’ll receive a degree from one of our university partners. The degree course runs for four years and is a work-based learning degree, with block release attendance onsite at the University. You’ll spend a minimum of 20% of your time learning and studying. Training Outcome: Once you have finished your apprenticeship you will be a fully qualified Software Engineer / Software Developer within BT Group Employer Description:You’re not just looking for a career, you’re looking to make a difference. Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security. From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating. This is your chance to make a real difference to the world. Grab it.Working Hours :Monday to Friday, 9am to 5pm with some flexibility. 3 days per week in the office.Skills: IT skills,Organisation skills,Problem solving skills,Logical ....Read more...
Accreditation Support Apprentice (ASA)
Purpose of the post: To perform a range of administrative functions to support the Quality Managers and technical staff in their efforts to secure accreditation to ISO17020 and ISO17025. To assist Quality Managers in working with the forensic departments actively seeking accreditation, mainly, but not exclusively, Crime Scene Investigation (CSI) and Hi-Tech Crime Unit (HTCU). Main duties and responsibilities: To assist in the preparation of Standard Operating Procedures by observing and discussing processes with technical staff. To assist Quality Managers in the maintenance of the Quality Management System (QMS) by ensuring documentation for upload meets document control requirements, uploading documents as required and editing documents already held in the QMS. To produce or assist in the production of presentations, figures and reports as required by the Quality Managers to support training and accreditation efforts. Assist Quality Managers by raising actions and registering activities on the Quality Management System, as required. Assist Forensic Services staff in the writing up of validation reports to required specifications under guidance of Quality Managers and technical staff. To record feedback and opportunities on Quality Management System. To attend departmental meetings and assist Forensic Support Officer’s with the taking of minutes and recording of actions. To support Quality Managers in the investigation of non-compliance or issues relating to administrative tasks (e.g. purchasing) by liaising with members of staff and interrogating departmental and/or force systems. To work with peers and managers to identify learning and improvement opportunities. To assist Quality Managers and technical staff with the maintenance of logs, registers and spreadsheets. Undertaking other reasonable duties (e.g. general administrative tasks) may be required from time to time. Mandatory Duties: Actively seek to implement the City of London’s and City of London Police Occupational Health and Safety Policy in relation to the duties of the post, and at all times give due regard to the health and safety of both themselves and others when carrying out their duties. Actively seek to implement the City of London’s Equal Opportunity Policy and the objective to promote equality of opportunity in relation to the duties of the post. As deemed necessary, to demonstrate competency as defined within our ISO procedures and documentation To comply with the Forensic Science Regulator’s Codes of Conduct and Practice Selection criteria Skills, Knowledge and Experience: Excellent oral and written communication skills in order to generate the reports as detailed above, communicate via email and verbally liaise with officers up to a senior level to offer advice and guidance regarding issues or queries relating to the implementation of quality standards. Excellent planning and organisational skills, with an eye for detail as they will generally be required to manage their own workload whilst maintaining the high technical standards required by the department. They are required to provide accurate minutes of meetings and data via numerous spreadsheets (Word and Excel). IT skills (word processing, spreadsheets, E-mail, databases). The post holder will be required to generate documents and reports in Word format, maintain various spreadsheets in Excel format and maintain information on various databases including Case AND Quality Management Systems. Training:You will be supported to achieve the Business Administration Level 3 apprenticeship. Theoretical training will be Biweekly with the support of the training provider. Practical training and support will be given in the workplace allowing you to embed your learning in the working environment. You will receive hours 6 per week to support with your apprenticeship studies.Training Outcome:On successful completion of the apprenticeship, we aim to offer a permanent role within the team if a position is available. Alternatively, we shall endeavour to secure an alternative position within the City of London Corporation.Employer Description:The City Corporation with a rich history that precedes parliament, the City Corporation has been an ever constant throughout history adapting in order to meet modern demands of the City it serves, and is home to some of the world’s most striking modern architecture. The City of London Corporation forms part of London as a whole, along with the 32 London Boroughs who have responsibility for local government services within their local area. Based at the Guildhall the City Corporation looks after and promotes the City of London.Working Hours :8:00am to 4:00pm (including 45 minute unpaid lunch break) – Monday to Friday. Flexibility may be required for business needs.Skills: IT skills,Attention to detail,Organisation skills,Customer care skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Non judgemental ....Read more...