Role & responsibilities:
The Engineering Apprenticeship Scheme at TSTL consists of the following placements in the engineering teams:
Process Engineering
Product Engineering
Tooling Engineering (CAD)
During each rotation you will work closely with the department, supporting both day-to-day tasks and completing short projects whilst learning about the area. This will include tasks such as writing technical documents, statistical analysis of process data, problem investigation and resolution and tooling design and control. By utilising these skills you will provide technical support which will help resolve key business issues.Training:You will study on a Level 6 Manufacturing Engineer degree apprenticeship on a Maintenance Technology pathway. On completion of this, you will gain a qualification in Engineering at Degree Level 6 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Established in 2000, Turbine Surface Technologies (TST) is a joint venture between Rolls-Royce and Chromalloy, providing specialist coatings solutions to state-of-the-art gas turbine components.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
An opportunity has arisen for a Electrical Installation Manager to join a well-established engineering firm. This full-time role offers starting salary of £45,760, hybrid working options and starting salary of £45,760.
As a Electrical Installation Manager, you will be managing EV charging installations while leading a team of engineers and ensuring regulatory compliance.
You will be responsible for:
* Leading the design, specification, and safe delivery of domestic EV charger installations.
* Overseeing the full project lifecycle from site survey to final commissioning.
* Carrying out on-site technical audits and maintaining quality assurance.
* Supporting scheduling and operational planning.
* Mentoring engineers and apprentices with hands-on training and guidance.
* Acting as the primary technical point of contact for EV projects.
* Liaising with internal teams, suppliers, and relevant third parties
What we are looking for:
* Previously worked as a Electrical Engineer, Electrical Installation Manager, Electrical Design Engineer, Installation Manager, Electrician, EV charging Project Manager, Electrical Installer Fitter, Technical Manager, Project manager, EV Charger Manageror in a similar role.
* Experience in EV charging installation and design.
* Background in leading or mentoring engineering teams.
* Electrical qualification (NVQ Level 3 or equivalent).
* City & Guilds 2921-31 (EV Charger Installation) and City & Guilds 2391-52 (Testing & Inspection).
* Understanding of isolation procedures and electrical compliance.
* 18th Edition Wiring Regulations.
* Valid UK driving licence.
* Must be located within a 20-mile radius of the office.
What's on offer:
* Competitive salary
* 28 days' holiday including bank holidays
* Company pension
* Company vehicle and fuel card
* Private medical insurance
* Continued training and development
* Social events and team-building activities
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
An opportunity has arisen for a EV Manager to join a well-established engineering firm. This full-time role offers starting salary of £45,760, hybrid working options and benefits.
As a EV Manager, you will be managing EV charging installations while leading a team of engineers and ensuring regulatory compliance.
You will be responsible for:
* Leading the design, specification, and safe delivery of domestic EV charger installations.
* Overseeing the full project lifecycle from site survey to final commissioning.
* Carrying out on-site technical audits and maintaining quality assurance.
* Supporting scheduling and operational planning.
* Mentoring engineers and apprentices with hands-on training and guidance.
* Acting as the primary technical point of contact for EV projects.
* Liaising with internal teams, suppliers, and relevant third parties
What we are looking for:
* Previously worked as a Electrical Engineer, Electrical Installation Manager, Electrical Design Engineer, Installation Manager, Electrician, EV charging Project Manager, Electrical Installer Fitter, Technical Manager, Project manager, EV Charger Manageror in a similar role.
* Experience in EV charging installation and design.
* Electrical qualification (NVQ Level 3 or equivalent).
* City & Guilds 2921-31 or equivalent (EV Charger Installation).
* City & Guilds 2391-52 or equivalent (Testing & Inspection).
* Understanding of isolation procedures and electrical compliance.
* 18th Edition Wiring Regulations.
* Valid UK driving licence.
* Must be located within a 20-mile radius of the office.
What's on offer:
* Competitive salary
* 28 days' holiday including bank holidays
* Company pension
* Company vehicle and fuel card
* Private medical insurance
* Continued training and development
* Social events and team-building activities
Apply now for this exceptional EV Manager opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
.NET Software Engineer, Kentucky, KY
.NET Software Engineer, Kentucky, KY
(Tech stack: .NET Software Engineer, Senior Software Developer, .NET 8, C#, .NET Core, .NET, MS SQL, HTML, CSS, Azure, Visual Studio)
I am currently recruiting on behalf of a leading pharmaceutical company based in Louisville, KY, looking to hire a talented .NET Developer to join their growing team. This is an exciting opportunity to work on innovative solutions within a dynamic and fast-paced environment.
The Role:
As a .NET Developer, you will be responsible for designing, developing, and maintaining .NET applications that support critical business operations. You will work closely with cross-functional teams to build scalable, high-performance software solutions.
Key Responsibilities:
Develop, test, and maintain .NET applications using C#, ASP.NET, .NET Core, and SQL Server.
Work with Web APIs to integrate applications with external services.
Build and enhance user interfaces with HTML, CSS, and JavaScript.
Utilize Visual Studio for development and debugging.
Collaborate with stakeholders to gather and analyze requirements.
Optimize application performance, scalability, and security.
Conduct code reviews and ensure best development practices.
Stay up to date with emerging technologies and contribute to process improvements.
Requirements:
Strong experience in C#, ASP.NET, .NET Core, and SQL Server.
Proficiency in Visual Studio, Web APIs, HTML, CSS, and JavaScript.
Experience working within an Agile development environment.
Excellent problem-solving skills and ability to work both independently and in a team.
A passion for technology and a keen interest in the pharmaceutical industry.
Benefits:
Competitive salary based on experience.
401(k) with company match.
Comprehensive health, dental, and vision insurance.
Generous PTO and paid holidays.
Professional development opportunities and career growth.
Hybrid work options (Louisville, KY).
Employee wellness programs and work-life balance initiatives.
If you’re a passionate .NET Developer looking for your next challenge, I’d love to hear from you! Please send your resume and contact details to [Your Email] or reach out to me directly for more information.
Location: Kentucky, KY, USA / Remote Working
Salary: $60,000 - $80,000 + Bonus + Benefits
Applicants must be based in the USA and have the right to work in the USA even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUSANETREC
NOIRUSAREC
NC/NET/HOU450563....Read more...
Data Engineer - Leading Pharmaceutical Company - Manchester
(Tech Stack: Data Engineer, Databricks, Python, Power BI, AWS QuickSight, AWS, TSQL, ETL, Agile Methodologies)
About the Role: We are seeking a talented and experienced Data Engineer on behalf of our client, a leading Software House. This is a fully remote position, offering the opportunity to work with cutting-edge technologies and contribute to exciting projects in a collaborative environment.
About the Role: Our client is seeking an experienced Data Engineer to join their team in Manchester. This hybrid position involves working within the pharmaceutical industry, focusing on the design, development, and maintenance of data pipelines, ETL processes, and databases. The role is ideal for someone passionate about improving processes, ensuring data quality, and maintaining compliance with regulatory standards. focusing on designing, developing, and maintaining data pipelines, ETL processes, and databases. If you are passionate about driving continuous improvement and ensuring data quality and compliance, we want to hear from you.
Key Responsibilities:
Design, develop, maintain, and optimise data pipelines, ETL processes, and databases.
Drive continuous improvement by refining processes, products, and identifying new tools, standards, and practices.
Collaborate with teams across the business to define solutions, requirements, and testing approaches.
Assist with process definition, ensuring compliance with organisational processes and regulatory standards.
Ensure compliance with regulatory requirements and standards and audit readiness.
Automate and monitor data and data processes, ensuring data quality and integrity.
Share knowledge and provide guidance on databases and data.
Maintain up-to-date, accurate, and concise documentation of database configurations and processes.
Work across the team to deliver best practice infrastructure and infrastructure deployment and management processes.
Essential Skills/Experience:
A good degree in a relevant subject or equivalent professional experience in a data role.
At least 3 years’ professional experience developing data pipelines and ETLs using Microsoft products.
Minimum 1 year of experience working with cloud-native technologies like Azure Data Factory.
Demonstrable experience of delivering technical work within time and budget constraints.
Good understanding of data security best practices.
Experience in supporting ETLs or data pipelines crucial to a production system.
Experience working in a cross-functional team to deliver technical solutions.
Desirable Skills:
Experience with SQL Server, SSIS, Azure Data Factory, and Azure SQL.
Experience with Cloud and Infrastructure as Code, particularly in an Azure setting using Bicep.
Understanding of DevOps practices and the associated benefits.
Skill in database testing including unit, performance, stress, and security testing.
Experience working in an agile team.
Experience working in a highly regulated industry and with highly sensitive data.
Exposure to large data solutions like Snowflake, Trino, Synapse, Azure Data Lake, and Databricks.
Experience in data science using R, Stata, or Python.
Familiarity with Atlassian tools such as JIRA, Confluence, and BitBucket.
Understanding of clinical trials, GCP, and GxP.
What We Offer:
Hybrid working model with flexibility between remote and office-based work.
Competitive salary and benefits package.
Opportunity to work on innovative projects within the pharmaceutical industry.
Collaborative and supportive work environment.
Professional development and career growth opportunities.
Location: Remote Working UK
Salary: £45,000 – £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote work is available.
To apply for this position please send your CV to Matt Jones at Noir.
NOIRUKTECHREC
NOIRUKREC
NC/RG/DE....Read more...
To assist fully trained gas engineers on the day-to-day activities of annual gas servicing, installing domestic heating systems, boilers, responsive repairs and maintenance
Use authorised plant and equipment provided with due care and attention and as supervised
Carry out basic trade instructions, read and interpret drawings as required
To work effectively as part of a team and with other trades within Unitas
To accurately complete documents for all work undertaken
To complete the Level 3 Gas Engineer Apprenticeship qualification by attending college as necessary, completing coursework and examinations as requested
Undertake Health and Safety and other training as required
Carry out relevant trade duties on responsive & planned works as requested to Unitas minimum standards
Undertake minor maintenance and repair works as required
Work as part of a team and use materials and equipment safely
Build and maintain good working relationships with colleagues, customers and managers to ensure effectiveness and efficiency within the business
Be aware of risk assessments and method statements relating to your own area of work and to work in a safe manner, taking into account other people’s health and wellbeing
Take part in the apprentice review process and complete any training required
Follow Unitas Health and Safety policy and procedures, including the wearing of personal protective equipment when necessary
Comply with Unitas confidentiality and information security policies at all times
Your duties may vary from time to time within the broad remit of your role. You are required to undertake any such reasonable and appropriate duties requested of you
Training:Gas Engineering Operative Level 3.Training Outcome:Qualified Gas Engineer. Employer Description:Stoke-on-Trent City Council values the diversity of its community and aims to have a workforce that reflects this – we therefore encourage applications from all sections of our community. We celebrate diversity and are committed to creating an inclusive environment for all employees – a place where we can all be ourselves and succeed together.Working Hours :Monday to Friday, working hours TBC.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
Assist in servicing, repairing and maintaining a range of industrial cleaning machines.
Learn to diagnose electrical and mechanical faults on industrial cleaning machines.
Follow health & safety procedures to maintain a safe working environment.
Participate in on-the-job training and attend college as part of the apprenticeship programme.
Assist with Hub organisation and stock management.
Ensure all preparation/repair/refurbishment jobs are completed to set quality standards and to defined criteria per machine ‘job family’ and to time.
Test machines in line with company guidelines before delivery to customer to ensure quality criteria has been achieved.
Refurbish machines to set quality standards and guidelines including cosmetic repairs and valeting.
Perform fault diagnostics on smaller machines and process all machines requiring repair to more senior engineers in the hubs for completion.
Fully prepare, inspect and valet all small equipment (not requiring repair) ready for dispatch to customers and in line with quality standards.
Ensure that all machines and ancillaries are PA tested and correctly labelled before delivery to customer.
Training:One day a week at Warrington & Vale Royal College (Winsford site).Training Outcome:Role progression to Field Service Engineer Roles, Hub Team Leader, Technical Services Engineer.Employer Description:ICE is the UK’s largest independent provider of cleaning equipment. We manage thousands of sites across the UK in a wide variety of sectors including retail, healthcare, warehousing, manufacturing, distribution and education. As well as supplying and servicing traditional cleaning equipment, we also have over a decade of experience in robotic floor cleaning machines. The successful apprentice will diagnose faults and carry our repairs, ensuring our fleet of machines and robot are at peak efficiency. This is an excellent opportunity to develop hands on mechanical and electrical engineering skills whilst working towards a recognised apprenticeship qualification.Working Hours :Monday - Friday, 8.00am - 5.00pm, with a 60 minute unpaid lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Basic understanding of tools.,A willingness to learn,Willingness to develop skills,A good team player,Positive attitude....Read more...
Job description
Multi-Skilled Maintenance Engineer – Electrical Bias (Days – Swing Shift)Location: HalifaxSalary: Up to £45,000 + Overtime & Career Growth OpportunitiesShift: Days – Swing Shift (6:00 AM to 2:00 PM / 2:00 PM to 10:00 PM, Monday to Friday)Why Join Us?Are you a Multi-Skilled Maintenance Engineer with an electrical bias looking for a stable, well-paying role in a supportive and forward-thinking environment? Join a leading manufacturing business that invests in cutting-edge technology, employee development, and continuous improvement.With a strong team culture, great benefits, and real opportunities for growth, this isn’t just another job—it’s a long-term career opportunity.Your Role at a Glance:
Reactive & Preventative Maintenance – Maximise equipment uptime across a fast-paced manufacturing facilityTroubleshooting & Repairs – Rapid response to breakdowns to support production efficiencyElectrical & Mechanical Maintenance – Ensure all machinery runs safely, reliably, and in compliance with standardsProcess Improvement – Operate within a Lean Manufacturing environment to enhance performance and reduce wasteHealth & Safety Compliance – Uphold ISO 9001, 14001 & 45001 standardsProject Work – Involvement in installation, decommissioning, and recommissioning of machinery
What You Bring to the Team:
Level 3 qualification in Electrical Engineering (or equivalent)3+ years of maintenance engineering experience in a manufacturing or industrial settingStrong hands-on skills in both electrical and mechanical systems (electrical bias preferred)Solid experience with PPM & TPM systemsAbility to read and interpret engineering drawingsWelding experience (MIG & Stick) is advantageous but not essentialFamiliarity with extrusion, mixing, or blending equipment is beneficial
Perks & Benefits:
Competitive salary up to £45,000 + OvertimeCompany Pension & Life InsuranceOn-site Canteen & Free ParkingOngoing Career Development & Training
Ready to take the next step in your engineering career? Apply now to join a dynamic and supportive team!Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy
....Read more...
What you will learn:
Industry health and safety standards, environmental regulations, and compliance requirements.
Maintenance and operational practices for a variety of manufacturing equipment.
Core engineering theories and principles relevant to manufacturing engineering.
Programmable Logic Control (PLC) and Human Machine Interface (HMI) systems.
Lean Manufacturing principles such as Value Stream Mapping, Just-in-Time, Heijunka, Andon, Single Piece Flow, 5S, TPM, Kaizen, and SMED.
Practical knowledge of high-precision tools, automation, and robotics.
CAM programming using software like Edge-cam, Inventor, and AutoCAD.
Your responsibilities:
Support the development of solutions to enhance production capabilities through robotics and automation.
Provide support to manufacturing Andon system, providing solutions to interruptions in production flow.
Evaluate and optimise manufacturing processes to improve efficiency.
Troubleshoot production issues to minimise downtime.
Ensure all necessary documentation, information, and tools are available to support the manufacturing team.
Collaborate effectively with your team, communicate clearly, and contribute to continuous improvement initiatives.
Attend college and maintain good progress with studies submitting assignments and coursework in good time.
Training:You will receive practical training at our site in Barnstaple, working alongside an experienced team of Manufacturing Engineers. Formal learning will take place at Petroc, working towards a Maintenance and Operations Engineering (Level 3) apprenticeship, where you will gain additional experience and technical knowledge. This combination ensures you develop both the practical skills and the core knowledge required to succeed in your role.Training Outcome:Upon successful completion of the apprenticeship, there are a variety of exciting career paths available. Many of our former apprentices have progressed into roles such as Manufacturing Engineer, Process Engineer, and even Management positions. With the solid foundation and skills gained during your apprenticeship, you will have the opportunity to advance within the company and develop a rewarding long-term career in engineering.Employer Description:At Parker, we play a pivotal role in applications that change our world. We are in almost everything that moves. With our wide range of technologies, including in the clean tech space, we help our customers solve their most complex engineering challenges.Working Hours :Monday to Thursday, 08:00 to 16:30. Friday, 08:00 to 14:00.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Patience....Read more...
To gain knowledge of manufacturing systems and processes
Use precision measuring instruments like micrometres, gauges, and coordinate measuring machines (CMM) to check the component dimensions to drawings
Learn to use measurement equipment, such as hand measuring devices such as vernier, micrometre etc.
Learn to read Engineering drawings and Control Plans and knowledge of quality systems, gauging and close tolerance measurement
Conduct first off / last off sample approvals and gain a working knowledge of the application of SPC and MSA principles
Stop production in the event of unacceptable products or processes
Data collection activities to define issues and drive improvementsAssist NPI team with new product introduction and supporting activities
Participate in the development and refinement of Design and Process FMEA’s (Failure Mode and Effects Analysis) and have a technical mindset to review and identify gaps and opportunities
Ensure Control Plans, PFMEA’s and associated documentation are implemented effectively and maintained
Support all necessary activities to ensure a robust Quarantine process and system is in place
Support with scrap and RFT initiatives and identify ways to drive improvements and reduce costs, identify best practices that emphasise defect prevention, reduction in variation and waste and that also provide for continuous improvements to meet or exceed all customer expectations
Training:
Engineering and Manufacturing Support TechnicianLevel 3 Apprenticeship Standard
Training Outcome:
Upon successful completion of the apprenticeship there will be an opportunity to become Quality Engineer in our quality department
Employer Description:Established in 1886, Jenks & Cattell Engineering have the prestige and expertise as one of the most established metalwork engineering companies in the UK. From manufacturing garden tools nearly 150 years ago, to manufacturing headlamp rims for the original 1959 Mini we have built a heritage to be proud of.Working Hours :Monday - Thursday, 7.30am - 4.00pm and 7.30am to 12.00 midday on FridaySkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
The Level 3 Food and Drink Engineering Maintenance apprenticeship programme lasts four years, and combines block release at Kirklees College (Huddersfield), with on the job work experience within the engineering department at Grupo Bim bo UK Ltd (New York Bakery) in Swinton, Mexborough. Grupo Bim bo is the largest Bakery product manufacturer in the world.
If successful at the end of the program you will have the following knowledge, skills and understanding to be a Food and Drink Maintenance Engineer:
Food processing/manufacturing and product knowledge (to meet company requirements e.g., dairy/confectionary/meat processing)
Legislation and regulations in the food and drink industry, including understanding of food safety, health and safety, hazard analysis critical control Point (HACCP), Threat Assessment Critical Control Point (TACCP) and Vulnerability Assessment Critical Control Point (VACCP)
Basic principles of sustainability and environmental legislationThe impact of customer requirements and demands on the food chain
The key principles of cleaning and hygiene processes cover both Cleaning in Place (CIP) and cleaning out of place systems
The key principles of quality management systems and processes
The key principles of Continuous Improvement (CI) ManagementMaterials science, including the key features of raw materials, their own uses in foods production and types of equipment used to process them
Types of best practice maintenance approaches and techniques in the food and drink industry
The principles of fault finding
The operation of mechanical equipment in the food and drink industry
How to produce replacement components
The function of fluid power systems
The operation of heat exchange equipment
The principles of cutting and welding in the food and drink industry
Principles of electrical systems, including their uses, safety, and legislation
Services and utilities knowledge, including the importance and importance of energy management and pollution control in food production
Training:You will study towards a Level 3 Food and Drink Maintenance Engineer Apprenticeship Standard at Kirklees College.
You will achieve a Diploma in Food and Drink Engineering Maintenance.
The college element of this apprenticeship has typically been on “block release”, so there has been the expectation to work and study away from home.
When required, accommodation and travel will be organised, but we need you to have a mature outlook, be mobile, and be “up” for the challenge of managing yourself and your studies when you are away from home at college, and when working at site.
Typical College attendance:
The typical duration of college attendance in previous years is shown below-
Year 1 = 17 weeks, Year 2 = 10 weeks, Year 3 = 16 weeks, Year 4 = 0 weeks
This is a 4-year programme.
The final year will involve completion of a portfolio and preparation for End Point Assessment (EPA). This measures the skills, knowledge and behaviours outlined in the standard and is carried out by ESFA approved organisations independent from the college.Training Outcome:
Following successful completion of the apprenticeship the applicant will be given the opportunity to apply for a shift based, multi skilled engineer
Following further development, possibilities exist in various maintenance supervision and management positions, manufacturing and project management
Employer Description:Ambient food manufacture and largest Bakery product manufacturer in the world.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,Team working,Resilient,Can do attitude,Practical aptitude,Practical approach,Confident self-starter,Ability to work accurately,Safe worker,Accepts responsibility,Proactive,Pride in work,Integrity,Time management....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management. Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture. The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety Assume a leadership position at the facility in partnership with the shift supervisors. Activities include resolution and communication regarding safety issues. Execute on scheduled PHA's and JSA's. Proactively monitor area and remediate potential safety issues. Use DAKOTA software as a tool for compliance and environmental, health and safety. Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture Develop and execute upon "standard work" activities. Assume responsibility for assigned activities on the Engineering Tier and other accountability boards. Conduct "GEMBA Walks" daily. Use walks as the primary means of education and communication of expectations. Improve productivity through elimination of non-value-added activities. Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality Work to maximize equipment efficiency and quality for output. Member of the facility QIC. Ensure identification of root cause and subsequent prevention of future customer complaints. Assist in the training of operators with a focus on quality critical product specifications and process parameters. Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university. B.S. in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology. BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online!....Read more...
Evaluate process rejects on a daily basis and provide scrap report if required
Retrieving and setting gauges for shop floor processes in a timely manner
Ensuring that gauging is released for external calibration on a weekly basis and ensuring that the general calibration status is in control
Ensuring that the shop floor has correct inspection records available
Providing PDI support to ensure parts are passed off in a timely manner for required sales
Performing daily process audits against the provided checklist to identify non-compliance and communicate remedial action items accordingly
Assist containment actions to check parts for dimensional failures and perform visual inspections
Using a variety of measurement devices to evaluate in-process machined castings to determine conformance (verniers, bore gauges, micrometres etc.)
Providing support within more junior roles as and when required.
Assist with running CMM programs to perform daily checks of the parts
The above does not expressly define the full extent of the role – we reserve the right to expect any other reasonable task to be undertaken.Training:
You will be required to attend Advance 1 Campus, Dudley College, 2 days in year 1, 1 day thereafter, term time only
You will be assigned an assessor who visits you in the workplace every 8 weeks to support you on your apprenticeship
Upon successful completion of your apprenticeship, you will gain a Level 3 Engineering and Manufacturing Support Technician qualification
Training Outcome:A career as a Quality Inspector, Quality Technician or Quality Engineer.Employer Description:The Brockmoor Foundry is a long established foundry whose core competency is the manufacture of ductile (spherodial graphite) iron. We manufacture a broad range of metal grades from 400/15 through to 800/2 across a diverse product range. As part of our ongoing commitment to providing a vertically integrated supply solution, we offer a wide range of additional, high precision services including machining, painting and assembly ensuring our role in the supply chain is all encompassing and lean and meets the expectations of an increasingly demanding market place. Our enviable customer portfolio (including several global market leaders in Commercial Vehicles, Hydraulics and Off Highway) demands that we embrace a long term commitment to collaboration and product optimisation whether through Cad support, Solidification analysis or our several years of experience. This same commitment is applied throughout our customer base with large and small accounts alike.Working Hours :Monday to Thursday
08:00 - 16:30
Friday
08:00 - 15:00.Skills: Communication skills,Attention to detail,Motivated,Meet targets,Willing to learn,Drive for improvement,Meet deadlines....Read more...
.NET Developer - Europe’s Largest Radio Station Group – Cheshunt
(Tech stack: .NET Developer, .NET 9, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is Europe's largest and most profitable commercial radio group. In order to keep pace with the new digital technologies being developed, they are transforming their stations into interactive brands that can operate across multiple platforms such as online, digital TV and mobile. As such we are seeking .NET Developer to join their dynamic .NET / C# team of high flying individuals.
.NET Developer applicants should have a skill set that encompasses: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide you with industry recognised training in: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD and MongoDB.
This is an exciting opportunity to work on complex enterprise level .NET / C# software development projects. Our client offers a structured career progression programme, industry recognized training, flexible working hours and home working. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Cheshunt, Hertfordshire, UK / Remote Working
Salary: £50,000 - £70,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer - Europe’s Largest Radio Station Group – Salisbury
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is Europe's largest and most profitable commercial radio group. In order to keep pace with the new digital technologies being developed, they are transforming their stations into interactive brands that can operate across multiple platforms such as online, digital TV and mobile. As such we are seeking .NET Developer to join their dynamic .NET / C# team of high flying individuals.
.NET Developer applicants should have a skill set that encompasses: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide you with industry recognised training in: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, SQL Azure and MongoDB.
This is an exciting opportunity to work on complex enterprise level .NET / C# software development projects. Our client offers a structured career progression programme, industry recognized training, flexible working hours and home working. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Salisbury, Wiltshire, UK / Remote Working
Salary: £50,000 - £70,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer - Europe’s Largest Radio Station Group – Chertsey
(Tech stack: .NET Developer, .NET 9, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is Europe's largest and most profitable commercial radio group. In order to keep pace with the new digital technologies being developed, they are transforming their stations into interactive brands that can operate across multiple platforms such as online, digital TV and mobile. As such we are seeking .NET Developer to join their dynamic .NET / C# team of high flying individuals.
.NET Developer applicants should have a skill set that encompasses: .NET, .NET Core / ASP.NET MVC, C# and SQL Server. Our client can provide you with industry recognised training in: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and SQL Server 2022.
This is an exciting opportunity to work on complex enterprise level .NET / C# software development projects. Our client offers a structured career progression programme, industry recognized training, flexible working hours and home working. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Chertsey, Surrey, UK / Remote Working
Salary: £50,000 - £70,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer - Europe’s Largest Radio Station Group – Tamworth, Staffordshire
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is Europe's largest and most profitable commercial radio group. In order to keep pace with the new digital technologies being developed, they are transforming their stations into interactive brands that can operate across multiple platforms such as online, digital TV and mobile. As such we are seeking .NET Developer to join their dynamic .NET / C# team of high flying individuals.
.NET Developer applicants should have a skill set that encompasses: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide you with industry recognised training in: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and MongoDB.
This is an exciting opportunity to work on complex enterprise level .NET / C# software development projects. Our client offers a structured career progression programme, industry recognized training, flexible working hours and home working. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Tamworth, Staffordshire, UK / Remote Working
Salary: £30,00 - £55,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer - Europe’s Largest Radio Station Group – Brighton
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is Europe's largest and most profitable commercial radio group. In order to keep pace with the new digital technologies being developed, they are transforming their stations into interactive brands that can operate across multiple platforms such as online, digital TV and mobile. As such we are seeking .NET Developer to join their dynamic .NET / C# team of high flying individuals.
.NET Developer applicants should have a skill set that encompasses: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide you with industry recognised training in: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, SQL Azure and MongoDB.
This is an exciting opportunity to work on complex enterprise level .NET / C# software development projects. Our client offers a structured career progression programme, industry recognized training, flexible working hours and home working. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Brighton, East Sussex, UK / Remote Working
Salary: £50,000 - £70,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
Are you ready to step into a role where your organisational skills and project oversight directly shape successful outcomes? Imagine working in a supportive, structured environment where your efforts are recognised and rewarded - with a competitive salary, your birthday off, a company laptop and phone, and a NHS cash benefit plan after probation. Add 23 days' annual leave (plus bank holidays) and a group pension, and you've got a role that offers more than just a job - it offers balance, security, and growth. Join a company that's been a trusted IT partner in the retail space for over 20 years, working with some of the UK's most recognisable brands.European Information Technology is seeking a driven and detail-oriented Project Co-ordinator to join its team in Crayford. This is a full-time, office-based position ideal for someone who thrives in a fast-paced environment and enjoys managing projects from end to end.About the RoleThe ideal candidate will be responsible for planning, coordinating, and implementing projects within agreed budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members. Strong administration and organisational skills essential.As a Project Co-ordinator, you'll be responsible for all aspects of delivery including booking engineer visits for projects alongside projects administrator, speaking directly to end user customers, ensuring each job is completed and finally, working on invoicing for end of project billing. Driving everything forward from planning to implementation, your actions will directly influence the efficiency and cost-effectiveness of the project.You will cover the day to day management of all project elements including both third party contractors and EIT employees engaged in site work, budgets and on-going reviews of the supporting paperwork process. Responsibilities
Working with Projects Team on further works EIT completeCompleting standardised stakeholder updates on all projectsMaintaining and monitoring project schedules, ensuring that all tasks are being completed on timeMonitoring project budget, including financial performance and resource planningOrganising and attending stakeholder meetings, taking minutes and distributingCompiling project status reports and presentations for senior management and clientsIdentifying and assessing project risks, and reporting to the Ops/Engineer DirectorProviding assistance with business development, including coordinating, tracking, and writing project proposalsProviding administrative support as needed, including filing paperwork and taking meeting notesHandling any risks and issues raisedUnderstanding of CRM system and managing customer expectationsEnsuring each job is complete with a sign off and photos of the installations in line with administration support staffWorking on any documentation that may assist with the process to ensure we continue to develop and improve upon our service deliveryAnswer and redirect all incoming calls and emails as appropriate
The main duties listed above are not intended to be exhaustive and may be revised in accordance with the requirements of the department and the company. Location
Permanent, full time positionStandard business hours (9am - 5.30pm)Office based - Crayford, DA1 4SL
The successful candidate will be rewarded with the following salary and benefits:
Salary of £30,000 - £34,000 per annum (dependent upon experience)Salary negotiable based on experience23 days' annual leave (plus bank holidays)Birthday off work (If it falls on a weekend the nearest Monday or Friday off)WPA Cash Benefit Healthcare Policy (upon successful probation)Group stakeholder pension (after three months)Company LaptopCompany Mobile PhoneCompany Credit Card for all business expenses (upon successful probation, if required)
All applicants must be eligible to live and work in the UK, and due to the nature of our business have a clean credit/criminal history. EIT Limited is an equal opportunities employer. About UsEuropean Information Technology has been in the retail environment for over 20 years and has a vast portfolio of clients we work with. Our aim is to provide a service to customers meeting their IT needs generally, but also including Installation of network infrastructure, Point of Sale rollouts, Maintenance, Chip & PIN deployments, WiFi and IT procurement. ....Read more...
Overview
Ref: 109649
Senior Infrastructure Engineer / Virtualisation / Cloud / Scripting / Inside IR35
Role Responsibilities
Responsibilities will include:
Designing, implementing, administering, and maintaining core IT infrastructure systems, including:
Server hardware platforms.
Virtualisation suites (e.g., VMware, Hyper-V).
Backup solutions.
Supporting to key Enterprise Applications
Acting as the principal IT liaison between software users and vendor support
Developing, monitoring, and revising policies and procedures for IT systems
Ensuring data integrity, security, and optimisation of IT systems
Develop scripts to automate routine tasks and improve system efficiency.
Essential skills will include:
Extensive experience in core IT infrastructure systems.
Proficiency with cloud and hybrid environments (e.g., Azure, AWS).
Strong knowledge of automation and scripting tools (e.g., PowerShell, Python).
Advanced understanding of IT security, compliance, and performance optimisation.
Basic experience with database management.
Proven experience in a similar senior infrastructure role.
Next Steps
Apply by contacting Ciaran Ahern, 0131 270 6608 or cahern@fpsg.com
Equal Opportunities
FPSG is committed to equal opportunities regardless of gender, race, disability, sexual orientation, religion or belief and age.
We are Disability Confident and neurodiverse aware. If you have a disability, please tell us if there are any reasonable adjustments we can make to assist you in your application or with your recruitment process....Read more...
Senior Azure Site Reliability Engineer
A leading Cloud Consultancy are headhunting for a DevOps Platform Architect to join their impressive Cloud Services team. As a DevOps advocate, you will be empowered to streamline processes through innovative use of code, platforms, and tools.
Your team will provide standardized approaches and frameworks, collaborating within the Cloud Services Group to architect, build, and maintain solutions that drive operational excellence. You will create a diverse portfolio of solutions, from targeted automation scripts to full-scale platforms with web front-end functionality.
Key Responsibilities:
Act as the technical expert in Automation/DevOps.
Lead the DevOps community of practice.
Drive service improvement through process/tooling/automation.
Create and maintain guidance frameworks for optimisation solutions.
Document and consider strategic requirements.
Identify and prioritise optimisation opportunities.
Provide guidance and training on best practices.
Introduce valuable new technologies and tools.
Stay updated with emerging technologies and industry trends.
Independently handle tasks and projects.
Requirements:
Understanding of the software development lifecycle and DevOps/SRE methodologies.
Microsoft technology background, especially Azure PaaS.
Familiarity with CI/CD implementations and IaC tools (e.g., Terraform, Bicep, ARM).
Proficient in multiple programming languages (e.g., .Net (C#), PowerShell, T-SQL).
Desirable: Python, Java/JavaScript, Microsoft Power Platform (Apps, Automate, BI).
Desirable: Awareness of Microsoft frameworks like the Cloud Adoption Framework.
Strong analytical and problem-solving skills.
Remote based.
Paying up to 75k, depending on experience.
Must be eligible to work in the UK. ....Read more...
.NET Developer, Optimizely, CMS – Colchester, Essex
(Tech stack: .NET Developer, CMS, Optimizely, Sitecore, Umbraco, .NET 9, C#, Angular, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Established in the 1990s our client is one the fast growing technologies brands across Europe. They have built an unrivalled reputation for developing revolutionary .NET software solutions. Having recently embarked upon a number of cutting edge Greenfield .NET projects they are looking to recruit .NET Developer to join their award winning .NET development team.
Working in tandem with Microsoft's very own consultants .NET Developer will be working on the development of complex enterprise .NET projects that have attracted much attention in the trade place. .NET Developer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. .NET Developer candidates should have some knowledge of a Content Management System (CMS) such as Optimizely, Sitecore, Umbraco, Alterian, Immediacy, Ektron, Kentico, Sitefinity or dotnetnuke. Our client can provide you with industry recognised training in: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
This is a unique opportunity to join a firm that genuinely values its employees; they have ranked highly in the Times Top 100 List of Employers over the last 5 years. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: Colchester, Essex, UK / Remote Working
Salary: £45,000 - £70,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer, CMS, Sitecore, EpiServer, Umbraco – London
(Tech stack: .NET Developer, CMS, Sitecore, EpiServer, Umbraco, .NET 9, C#, Angular, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Established in the 1990s our client is one the fast growing technologies brands across Europe. They have built an unrivalled reputation for developing revolutionary .NET software solutions. Having recently embarked upon a number of cutting edge Greenfield .NET projects they are looking to recruit .NET Developer to join their award winning .NET development team.
Working in tandem with Microsoft's very own consultants .NET Developer will be working on the development of complex enterprise .NET projects that have attracted much attention in the trade place. .NET Developer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. .NET Developer candidates should have some knowledge of a Content Management System (CMS) such as Sitecore, EpiServer, Umbraco, Alterian, Immediacy, Ektron, Kentico, Sitefinity or dotnetnuke. Our client can provide you with industry recognised training in: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
This is a unique opportunity to join a firm that genuinely values its employees; they have ranked highly in the Times Top 100 List of Employers over the last 5 years. These positions are urgent, as such our client guarantees to provide feedback on CV's within 24 hours of submission and complete the interview process within 1 week.
Location: London, UK / Remote Working
Salary: £40,000 - £75,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
Are you a systems thinker with a passion for innovation and leadership? Were looking for a Senior Systems Engineer to join a cutting-edge engineering team working on complex, multidisciplinary products across the full lifecycle, from concept to delivery.
This is a great opportunity to play a pivotal role in shaping high-integrity solutions across electrical, electronic, hardware, and embedded software domains. Youll be hands-on in project delivery and drive improvements in systems engineering practice, while mentoring and supporting the wider team.
What Youll Be Doing
- Lead systems engineering activities across complex product development programmes.
- Drive process improvements, mentor colleagues, and enhance engineering best practices.
- Define and manage system-level requirements, from stakeholder input through to compliance.
- Design system architectures, perform trade-off analyses, and guide project decisions.
- Provide technical leadership throughout the design, integration, validation, and commissioning phases.
- Engage with project managers, supply chain, production, and customers to ensure success from concept to delivery.
- Support bid and proposal activities with technical expertise and creative solutions.
What Were Looking For
- A degree in a relevant engineering discipline.
- A strong background in multidisciplinary systems engineering (min. 5 years).
- Experience across the full product development lifecycle.
- Practical understanding of electrical and electronic systems.
- Proven track record in leading technical teams and delivering successful outcomes.
- Strong communication, organisational, and mentoring skills.
- Passion for continuous improvement and innovation.
Whats In It for You
- 37.5-hour working week with early Friday finish
- Hybrid/flexible working arrangements
- 28 days holiday + Christmas closure + holiday purchase scheme
- Matched pension contributions up to 5%
- Income protection, life assurance & EAP (mental health, GP access, physiotherapy)
- Share schemes and electric vehicle salary sacrifice
- Wellbeing initiatives, sports/social activities, and discounts platform
- Rewarding referral scheme
- Excellent learning and development opportunities
Additional Information
You must be eligible for UK Security Clearance to apply. This includes proving your right to work and UK residency for the last five years.
Ready to lead, innovate, and make a real impact? Apply now and help shape something truly impactful.....Read more...
Work with the NPI department to ensure new products are introduced efficiently into production
Ensure optimal equipment performance
Attend APQP, FMEA, project update meetings as required
Adopt an error-proofing methodology
Adopt lean methodologies
Optimise productivity by designing, implementing and testing new procedures
Implement training and development programmes for employees
New equipment installation
Monitoring project performance to ensure timely delivery
Liaise proactively and effectively with internal departments, external organisations and stakeholders to ensure projects are adequately resourced and delivered
Develop solutions with best practice in mind
Deliver progress reports, proposals, and other required documentation to various departments and stakeholders
Managing contractors
Develop and implement an approach to systems and business change management
Work within budget to ensure projects are appropriately costed, ensuring value for money and that efficiency savings can be realised
Ensure any improvements and cost savings are highlighted and recorded
Work in accordance with all relevant legislation, policies & procedures and guidelines
Preparing documents and progress for Engineering Master tracker
Training Outcome:Upon successful completion of the apprenticeship, there will be an opportunity to become a Process Engineer in the engineering team.Employer Description:Established in 1886, Jenks & Cattell Engineering have the prestige and expertise as one of the most established metalwork engineering companies in the UK. From manufacturing garden tools nearly 150 years ago, to manufacturing headlamp rims for the original 1959 Mini we have built a heritage to be proud of.Working Hours :7.30am to 4pm Monday to Thursday and 7.30am to 12 midday on Friday.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Physical fitness....Read more...
