Principal Electronics Engineer
Horsham, West Sussex
£65,000 £75,000 + Benefits
Full Time, Permanent
A leading technology business is looking for a Principal Electronics Engineer to take a key role in driving electronics design and systems architecture across a team of around 15 engineers. This is a senior, handsâon and influential position, combining deep technical ownership with project leadership, mentoring and R&D.
The role
As Principal Electronics Engineer, you will:
- Lead electronics design activities across complex, multiâdiscipline projects, covering both circuitâlevel design and higherâlevel electrical architecture.
- Act as technical authority for key topics such as EMC, power management, servo control, processor interfacing, and communications.
- Define and review systemâlevel electrical architectures, including power distribution, signal transmission, wiring and production considerations.
- Own and deliver analysisâbased tasks such as circuit emulation, performance calculations and power budgets.
- Take technical leadership of multiâdisciplinary project teams, setting standards of good engineering practice and fostering a systematic, qualityâdriven culture.
- Proactively review and improve engineering processes, tools and design methodologies, driving innovation across the function.
- Investigate and resolve complex technical issues at PCB and system level, identifying root cause and recommending design or procedural improvements.
- Support bids and proposals, working closely with senior management, directors and key customers to shape solutions, estimate work and present technical approaches.
- Provide lineâmanagement style support for a small subâteam of engineers, including development, coaching, and input into resource and training plans.
About you
You are an experienced, handsâon electronics engineer who enjoys combining deep technical work with leadership, mentoring and process improvement.
Essential:
- Strong degree in Electronics, Electrical & Electronic Engineering or similar (IETâaccredited), with typically 10+ years relevant experience.
- Solid theoretical and practical understanding of electronics design, including modern PCB and component technologies.
- Proven experience leading projects and/or supervising engineers in a product development environment.
- Experience across areas such as EMC, power management, servo / motor control, embedded interfaces and communications.
- Strong analytical capability able to perform circuit analysis, power/performance budgeting and tradeâoff studies.
- Clear understanding of the full project lifecycle, from bid and concept, through design, verification, production and inâservice support.
- Demonstrable track record of innovation in engineering solutions and/or ways of working.
- Strong faultâfinding skills at PCB and system level, with a structured approach to rootâcause analysis and corrective action.
- Hold Right to work in the UK and have lived here for the last 5 years due to Security Clearance being obtained
To find out more please contact Max Sinclair max@holtengineering.co.uk....Read more...
Security Design Engineer Location: London
Looking for a Security Design Engineer to help design and embed secure architecture across enterprise technology platforms. This role focuses on building security into infrastructure and application designs while aligning with regulatory and internal security standards.
What you’ll be doing: • Embed security into solution and architecture designs • Perform threat modelling and security risk assessments • Define and maintain security design patterns and standards • Review technical designs for security compliance • Act as a security SME across cloud, network, and endpoint environments
What we’re looking for: • 5+ years in security architecture or engineering • Strong knowledge of NIST, ISO 27001, or similar frameworks • Experience with AWS, Azure, and/or GCP • Understanding of IAM, endpoint, and network security • Security certifications (CISSP, CISM) a plus
Interested? Apply now or message me directly to learn more.
FPSG is committed to equal opportunities regardless of gender, race, disability, sexual orientation, religion or belief and age.
We are Disability Confident and neurodiverse aware. If you have a disability, please tell us if there are any reasonable adjustments we can make to assist you in your application or with your recruitment process....Read more...
£45,000 – £50,000 DOE ,Private Medical Insurance, 40 hours per week, Permant contract, growing business.
A leading automotive organisation operating within a specialist niche market, recognised as a top-performing brand in its sector. The business continues to expand across multiple UK locations while investing heavily in capability, systems, and people. This role is based at the UK Head Office near Marlow.
This hands-on Manufacturing / Process Engineer position sits directly within production, supporting daily build activity, improving methods, and keeping assembly operations moving.
Key Responsibilities of the Manufacturing Engineer position
Act as escalation point for build faults, missing data, or unclear information
Implement rapid countermeasures to protect output, quality, and delivery
Develop and refine assembly methods, sequences, standards, and flow
Eliminate constraints using lean techniques including standard work, visual control, and balancing
Drive corrective actions through structured problem-solving tools
Maintain accuracy across BOMs, SOPs, and build documentation
Support defect resolution and prevent repeat occurrences
Prepare new variants for smooth transition from first build to repeat manufacture
Collaborate with operations, quality, engineering, stores, and supply partners
We would be keen to hear from people about the Manufacturing engineer position that have:
Background within manufacturing, assembly, engineering
Strong production mindset with hands-on credibility
Confident interpreting drawings while managing options and variants
Practical experience delivering continuous improvement activity
Comfortable taking ownership through to resolution
What’s on offer for the Production Fitter opportunity.
Clear accountability across production activity
High visibility within operational teams
Broad exposure covering support, improvement, and change readiness
£45k–£50k package with private medical cover
Opportunity to deliver measurable impact on-site
If you would this sounds of interest – hit apply or please feel free to contact Rodger Morley at E3 Recruitment....Read more...
Join a global engineering team driving the green energy transition. We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Join a global engineering team driving the green energy transition. We are seeking a Lead Verification and Validation Engineer to take ownership of HVDC Control and Protection testing and validation activities, ensuring delivery on time and to the highest technical standards.
Key Responsibilities
Lead planning and coordination of Verification and Validation activities.
Develop and execute Factory System Test (FST) cases and support Factory Acceptance Tests (FAT).
Create HVDC system and plant models using PSCAD, RSCAD, or EMTP-RV.
Prepare control system requirements for RTDS lab setups.
Support commissioning teams and contribute to process and tool improvements.
Requirements
Degree in Electrical, Power Systems , Power Electronics Engineering (or equivalent).
Proven experience in HVDC Control and Protection design and verification.
Strong technical skills in PSCAD, RSCAD modelling and system behaviour analysis.
Leadership experience in managing validation teams.
....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday – Thursday,
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV ....Read more...
Multi-Skilled Maintenance Engineer (Days only)
Location: Northampton
Salary: £50,000
Shift: 4 on 4 off days only
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV....Read more...
Successfully complete the nationally recognised qualification specified within the apprenticeship standard: Control systems engineer (degree) / Skills England
Attend the designated training provider and develop a strong understanding of the technical knowledge and skills required for the role
Act as an ambassador for UKAEA by representing the organisation at external outreach, engagement, and careers events
Training:Through UKAEA’s Apprenticeship Scheme, you will build the technical expertise, practical experience, and wider professional skills required for both your current role and future career progression. This is achieved through a combination of formal off‑the‑job learning and on‑the‑job training within a real working environment. Training Outcome:
Working towards becoming a Control Systems Engineer
Employer Description:By 2050, the planet could be using twice as much electricity compared to today. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs.
UKAEA leads the way in realising fusion energy, partnering with industry and research for ground breaking advancements with the goal to bring fusion electricity to the grid. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative.Working Hours :Monday to Friday
08:15 to 16:30Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative....Read more...
An Electronics Test Engineer is sought to join an innovative engineering team in Cambridgeshire, contributing to the development and implementation of test solutions for complex electronic products and PCB assemblies.
The Electronics Test Engineer, Cambridgeshire, will be expected to develop your understanding in the field, learning from senior engineers and peers in technical areas and industry best practices. This may include reading and interpreting customer test specifications, developing Design for Test (DFT) solutions, and supporting production test processes.
Responsibilities include:
Read and interpret customer test specifications and schematics to understand product requirements.
Develop and implement effective DFT and test plans to ensure high product yield and performance.
Serve as a technical point of contact with customer design and technical teams, discussing test requirements, solutions, product design, and improvements.
Investigate and research new testing methods, tools, and procedures to improve test coverage, fault diagnosis, and process efficiency.
Support Operations Test team on equipment specification, operation, product testing, and fault analysis.
Analyse defects and failures in collaboration with Quality, Engineering, and Production teams to implement corrective actions and continuous improvements.
Develop and maintain high-quality documentation, including test reports, SOPs, and customer-facing technical communication.
Work independently or as part of a team across multiple projects, ensuring timely delivery of test solutions.
Key skills & experience:
Minimum degree or equivalent academic qualifications; HNC level acceptable with extensive relevant experience.
Experience in electronic PCB/component testing environments with strong knowledge of electronic hardware.
Proficiency with lab software engineering tools such as LabVIEW and Gerber View; exposure to Embedded C, Python, or similar programming languages advantageous.
Strong analytical and problem-solving skills with high attention to detail.
Competent with Microsoft Office applications, particularly Excel, and capable of producing clear technical reports.
Ability to manage own projects with minimal supervision and work across multiple projects in parallel.
Effective communication skills, both verbal and written, with experience liaising with customers.
How to apply:
Apply now for the Electronics Test Engineer role in Cambridgeshire. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
Principal Mechanical Design Engineer – Medical Devices – Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists. Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career. In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills. Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields.....Read more...
Senior CAD Engineer – Life Science Instruments
Newton Colmore is working with a life sciences company in Cambridgeshire and we are searching for an experienced CAD engineer to join their design team.
You will be joining a team of experts to drive innovation through iterative design, on next generation life science instrumentation.
The company are working on life improving technology that combines engineering, science, and automation. As a Senior CAD Engineer, you’ll play a critical role in the design and development of precision-engineered components and intricate systems. You will be taking your designs through the entire design process, from initial design, to testing, and readying the component for manufacture.
Key Responsibilities
Lead the design and development of complex mechanical components using CAD tools (e.g., SolidWorks, Creo, or similar).
Collaborate with cross-functional teams including R&D, manufacturing, and quality assurance.
Create and manage detailed 3D models, assemblies, and technical drawings.
Support prototype development and testing, ensuring designs meet regulatory and performance standards.
Mentor junior engineers and contribute to continuous improvement initiatives.
What We’re Looking For
Proven experience in CAD design within a regulated industry, ideally medical devices or biotechnology, but open to other industries too.
Strong understanding of materials, manufacturing processes, and design for manufacturability.
Excellent problem-solving skills and attention to detail.
Familiarity with ISO 13485 or other relevant quality standards is a plus.
A degree in Mechanical Engineering or a related discipline and strong fundamentals.
Why Join?
Work on products that make a real difference in people’s lives.
Be part of a collaborative and forward-thinking team.
Competitive salary and benefits package including bonuses and market-leading pension scheme.
Excellent training and mentoring for engineers.
If you are interested in this role then make a confidential application now and a member of our team will be in touch. This search is being conducted by Matt Lowdon, a specialist medical devices and biotech recruiter.
....Read more...
Mobile Air Conditioning Installation Engineer - Newcastle upon Tyne w/ Working Away & National Travel - HVAC Contractor CBW Staffing Solutions are working with a leading specialist in the HVAC industry, providing high-quality air conditioning installation, service, and maintenance solutions to commercial and industrial clients. As their business continues to expand, we are seeking an experienced Air Conditioning Installation Engineer to join their team. This is a permanent position, based in Newcastle upon Tyne, Tyne & Wear - the successful candidate must be willing to work away from home and travel on a national basis. Package:Competitive salary between £39,000 - £43,000 per annum (depending on experience)Van & fuel card suppliedDoor to door travel paid!Core hours are Monday - Friday (40 hours per week)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Installing a variety of air conditioning systems (split, multi-split, VRV/VRF, ducted, etc.) in commercial and industrial environmentsReading and interpreting technical drawings, wiring diagrams, and specifications to ensure installations meet client requirementsCompleting installations to a high standard, ensuring compliance with industry regulations and safety protocolsCarrying out site surveys and providing recommendations for optimal system designsLiaising with clients to ensure smooth project delivery and providing clear, professional communication throughout the installation processManaging materials, tools, and equipment required for each jobWorking both independently and as part of a team to meet project deadlinesIdentifying and troubleshooting any issues during installations, ensuring quick and effective resolutionsQualifications:Relevant qualifications, such as NVQ Level 2 or 3 in Air Conditioning and Refrigeration or City & Guilds equivalentF-Gas certification (Category 1)A full UK driving licenceProven experience in installing a range of air conditioning systems in both commercial and industrial settingsStrong understanding of electrical wiring and controls related to air conditioning installationsIf you are a dedicated Air Conditioning Installation Engineer, looking for a rewarding career opportunity, please apply with your full CV or contact Amy O'Shea at CBW Staffing Solutions.....Read more...
Successfully complete the nationally recognised qualification specified within the apprenticeship standard: Electrical power networks engineer / Skills England
Attend the designated training provider and develop a strong understanding of the technical knowledge and skills required for the role.
Act as an ambassador for UKAEA by representing the organisation at external outreach, engagement, and careers events.
Training:Through UKAEA’s Apprenticeship Scheme, you will build the technical expertise, practical experience, and wider professional skills required for both your current role and future career progression. This is achieved through a combination of formal off‑the‑job learning and on‑the‑job training within a real working environment. Training Outcome:Working towards becoming an electrical power networks engineer.Employer Description:By 2050, the planet could be using twice as much electricity compared to today. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs.
UKAEA leads the way in realising fusion energy, partnering with industry and research for ground breaking advancements with the goal to bring fusion electricity to the grid. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative.Working Hours :Monday to Friday between 08:15 to 16:30.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
Pay: £65,000.00-£72,000.00 per yearJob Description:
Technical Controls and Automation EngineerBanbury (Site-Based) | £65,000–£70,000 + Benefits | Full-Time, PermanentAqumen Senior Appointments are proud to be partnering with a market-leading FMCG manufacturing business to appoint a high-calibre Multi-Skilled Engineering Technician.This is a key site-based role within a fast-paced food manufacturing environment, suited to a technically strong engineer with advanced PLC fault-finding and programming capability.The OpportunityYou will be responsible for delivering effective maintenance across plant, equipment, and facilities—ensuring maximum uptime, adherence to preventative maintenance schedules, and continuous improvement of manufacturing performance.This role requires strong electrical, mechanical, instrumentation, and controls expertise, alongside the ability to operate confidently in a regulated, hygiene-critical environment.Key Responsibilities
Diagnose and rectify electrical and mechanical faults efficientlyLead PLC fault-finding and programming (Siemens, Mitsubishi, Allen Bradley)Maintain and improve CMMS systems and maintenance recordsSupport plant improvements and capital projectsDrive continuous improvement initiativesEnsure compliance with health & safety, hygiene, and food safety standardsCoordinate contractors and issue permits where requiredSupport factory start-ups and production optimisationProvide occasional support across other UK sites
Candidate Profile
Time-served/apprentice-trained engineerHNC/HND/NVQ Level 3+ in Electrical & Mechanical EngineeringMinimum 3 years’ experience in FMCG or industrial manufacturingAdvanced PLC competency (fault finding and programming essential)Strong understanding of instrumentation and process control systemsCalm under pressure with excellent problem-solving skillsProfessional, proactive, and team-oriented
What’s on Offer
£65,000–£70,000 basic salaryPension & life insuranceHealth & wellbeing programmeCycle to work schemeOn-site parkingStructured, stable manufacturing environment
For a confidential discussion or to express interest, please apply directly or contact our retained search team.
....Read more...
Electrical Panel Design Engineer required with some project management experience, experience of control panels would be an advantage or experience sizing cables, working with motors etc also considered. Dealing with customers and reading and understanding specification documents highly desirable.
Responsibilities
Design and develop electrical control panels in accordance with project requirements and industry standards.
Utilize EPlan software to create detailed electrical schematics and panel layouts.
Ensure compliance with electrical safety regulations and standards.
Collaborate with cross-functional teams to support project delivery and implementation.
Provide technical expertise and support throughout the design and manufacturing process.
Perform quality checks and reviews to ensure accuracy and reliability of designs.
Requirements
Bachelors degree in Electrical Engineering or related field.
Proven experience in control panel design or related electrical engineering roles.
Proficiency in EPlan software for electrical schematic design and panel layout.
Strong understanding of electrical engineering principles and practices.
Excellent attention to detail and accuracy in design work.
Ability to work independently and collaboratively in a fast-paced environment.
Good communication and interpersonal skills.
Experience with AutoCAD is a plus.....Read more...
Electrical Panel Design Engineer required with some project management experience, experience of control panels would be an advantage or experience sizing cables, working with motors etc also considered. Dealing with customers and reading and understanding specification documents highly desirable.
Responsibilities
Design and develop electrical control panels in accordance with project requirements and industry standards.
Utilize EPlan software to create detailed electrical schematics and panel layouts.
Ensure compliance with electrical safety regulations and standards.
Collaborate with cross-functional teams to support project delivery and implementation.
Provide technical expertise and support throughout the design and manufacturing process.
Perform quality checks and reviews to ensure accuracy and reliability of designs.
Requirements
Bachelors degree in Electrical Engineering or related field.
Proven experience in control panel design or related electrical engineering roles.
Proficiency in EPlan software for electrical schematic design and panel layout.
Strong understanding of electrical engineering principles and practices.
Excellent attention to detail and accuracy in design work.
Ability to work independently and collaboratively in a fast-paced environment.
Good communication and interpersonal skills.
Experience with AutoCAD is a plus.....Read more...
We are searching for an experienced Mechanical Building Services Design Engineer / Building Services Design Engineer to join an exciting and highly regarded Mechanical and Electrical Design and Installation company based near to Cirencester.
Our ideal candidate will be Chartered or will hold an HND/HNC in Building Services Design Engineering with post qualifying experience in the UK construction industry designing HVAC systems from concept to delivery.
Our client provides a range of high quality Mechanical and Electrical solutions to both private and public sector customers across commercial and industrial applications, including, retail and leisure, healthcare, industrial, commercial, accommodation and education.
The services provided by our client include project management, design, procurement, installation, testing, commissioning and maintenance of Mechanical, Electrical and Public Health Engineering Services.
Required Skills and Experience:
Ability to take project ownership whilst under support of the Project Director and work both on their own and as part of a wide multi-discipline team.
Experience across various sectors including commercial, distribution, retail and residential would be a real benefit.
Experience in project delivery from design feasibility to commissioning undertaking all aspects including surveying, full design process, meeting attendance, site inspections.
General understanding of other MEP disciplines, BREEAM and Sustainability.
Excellent interpersonal and influencing skills to build internal and external relationships and trust.
Competent with Word, Excel.
Good knowledge of AutoCAD and Revit.
Knowledge of design software including such as Hevacomp, OpenBuildings (or similar)
Presentable and well-spoken, strong English language skills required as you will be involved extensively in Design Team Meetings, and the role is very client facing.
A strong understanding of Part L and Low Carbon Engineering.
An ambitious and driven individual with a long-term vision to build and grow the business and share in its success.
Benefits:
The role comes with an excellent benefits package which includes 25 days holiday plus bank holidays, pension, bonus and much more!
Please note, this is a full time, permanent, role based near to Cirencester. It is 100% office-based during probation (3-months) with the possibility of hybrid working thereafter. You will also be required at times to attend meetings on various client sites.
Please note, this is NOT a remote role, and you will be required in the office the majority of the time.
You will also be required to have the Right to Work in the UK long-term without company sponsorship to be considered for the position. Our client is unable to sponsor overseas candidates.
KEYWORDS Mechanical Building Services Design Engineer, Building Services Design Engineer, HND, HNC, Chartered, MEP, BREEAM, Sustainability, Word, Excel, AutoCAD, Revit, Hevacomp, OpenBuildings, Part L, Low Carbon Engineering
Please note that due to a high level of applications, we can only respond to applicants whose skills and qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.
Bowerford Associates Ltd is acting as an Employment Agency in relation to this vacancy.....Read more...
JOB DESCRIPTION
TREMCO CONSTRUCTION PRODUCTS GROUP (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The R&D Engineer provides engineering support for R&D initiatives, including cross-functional teamwork at the fire lab.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Execute various project activities supporting R&D Engineering
Support R&D projects that deliver business results through data-driven decision making
Execute data analysis and interpretation in support of project and product problem solving
Work within cross-functional teams to support new product and process development projects
Document and interpret data from technical and experimental activities
Execute and draw conclusions from experiments evaluating and optimizing the performance attributes of various technologies
Execute pilot equipment trials while capturing, recording, and interpreting data
Support the process development and validation, specification implementation, and work instruction creation of new product designs and processes
Assist with the exploration and research of new technologies in relevant processes for future applications
Interact with external vendors
Interact with customers and business leaders
EDUCATION REQUIREMENT:
Bachelor's degree from four or 5-year college or university in Engineering
EXPERIENCE REQUIREMENT:
Entry level engineer with co-op or internship experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS
Ability to communicate cross functionally
Comfortable fielding questions in a group setting
3D and 2D CAD preferred
Ability to perform Finite Element Analysis (FEA) preferred
WORK LOCATION: Onsite at our Fire Lab at 19501 Emery Rd, Warrensville Heights, OH 44128.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, talk, hear,and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $66,435 and $78,000 with a 12.5% bonus opportunity. This range is an estimate based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
JOB DESCRIPTION
The Mechanical Engineer (Jr) provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow. Charged with assisting with the development and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels. Responsible for investigating and implementing new process technology at the plant. The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant. This position is responsible for influencing the development of preventative maintenance programs at the facility assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication. • Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product • Participate in plant metric reporting • Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency and minimize cost • Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations • Use SAP to monitor production/business functions • Provides engineering support for all operations in the plant • Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications • Works with the plant engineers and maintenance and facilities to influence the direction of preventative maintenance best practices • Support a high-performance results-oriented culture and maintain high standards of safety and compliance • Provide technical and operational leadership for equipment and facility maintenance and improvements • Deliver disciplined project management and product development assistance • Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material • Troubleshoot and implementation of repeatability best practices • Support investigations on equipment failures, difficulties, and deficiencies • Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production • Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE • Perform a job in accordance with all Tremco safety policies and procedures • Perform other duties, as assigned
Education:
• Bachelor's degree (B. S.) in mechanical or electrical engineering preferred
Pay:
The hourly rate will be commensurate with the applicant's relevant experience.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
Role Climate17 are working alongside a fully vertically integrated renewable energy business who develop, build, own and operate a significant portfolio of large scale solar and wind assets across the UK. They are actively searching for a Junior Field Service Engineer to attend customers' sites, maintaining various solar PV systems on a day-to-day basis. These PV systems are mainly ground mounted solar farms. The Junior Field Service Engineer will be carrying out maintenance on installations, utilising and testing solar PV within their defined competences. Requirements Responsible for routine maintenance, testing, and remedial work on solar PV systemsAssisting the Installation of any new Solar PV or Wind systems in the current pipelineResponsible for performing Preventative MaintenanceResponsible for performing Corrective Maintenance as occur (Within competencies assessed and authorised for)Reporting of activities performed on site through the CMMS or manual reportsResponsible for supervision and coordination of third-party contractors carrying out works on siteCoordinate third party contractors in order to comply with H&S RegulationsKeeping accurate and detailed records of electrical testing, that are suitable for audit (Within competencies)Fault finding for any system that is not performing correctly (Within competencies assessed and authorised for)Alert the line manager of any issuesAny other reasonable task as requested by a Manager, Partner or Director of the businessRequirements Relevant Level 2 qualification in an electrical engineering discipline (City & Guilds, EAL etc)City & Guilds 17/18th BS7671 Wiring Regs (working Towards)Sub-station awareness trained2 + years Electrical maintenance, Fault finding & repair of LV AC/DC systems, ideally in a renewable energy setting.Excellent computer skills with a high degree of proficiency in Microsoft Word, Excel, and PowerPoint as well as CMMS and Reporting softwareAbility to read SLD’s & technical schematic drawingsClean current Full driving license (manual) Location: Kent – Site based About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know.....Read more...
Electronics Engineer – Piezoelectronics – New Product Development – Cambridge
A growing Scientific Engineering organisation is currently seeking an Electronics Engineer to assist in the product development of new piezoelectronics technologies.
You will collaborate with a team of mechanical design engineers, software engineers, and scientists, making teamwork crucial. In this role, you will be the sole electronics specialist, so confidence in your abilities is essential.
Your responsibilities will include electronics design and PCB layout for the new piezoelectronics devices, as well as writing Embedded C software and using other software languages.
While having experience in piezoelectronics would be ideal, it is not a strict requirement. However, we do prefer candidates with experience in highly regulated fields such as Medical Devices, Biotechnology, Scientific Engineering, Pharmatech, or other scientific domains.
While working on cutting-edge technologies, you will also enjoy an excellent starting salary, a generous pension, annual bonuses, private medical cover, life assurance, and other benefits typically associated with larger organisations.
Given the expected high level of interest in this role, we recommend submitting your application promptly if you are interested. We are looking for someone to start relatively soon, though we understand that you may have a notice period.
The interview process will be swift, commencing with a video interview and progressing to an in-person interview. Part of the interview may involve a tour of their state-of-the-art facilities, which are currently being expanded to stay at the forefront of technological advances.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will get in touch with you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Successfully complete the nationally recognised qualification specified within the apprenticeship standard: Electrical and electronic engineer (degree) / Skills England
Attend the designated training provider and develop a strong understanding of the technical knowledge and skills required for the role
Act as an ambassador for UKAEA by representing the organisation at external outreach, engagement, and careers events
We provide reactive service via tickets, to test and repair systems such as control & instrumentation, data acquisition, sensing, robotics and power supplies. We can also design and deliver large systems in-group, including for example neutral beam power supplies as part of MAST-U-E
We have highly experienced engineers up to doctorate level, with extensive knowledge of power systems, magnetics, fusionics, sensing and other areas essential to working towards commercial fusion. Our engineers are available to consult on projects at any stage including concept and initial requirements
Training:
Through UKAEA’s Apprenticeship Scheme, you will build the technical expertise, practical experience, and wider professional skills required for both your current role and future career progression
This is achieved through a combination of formal off‑the‑job learning and on‑the‑job training within a real working environment
Training Outcome:
Working towards becoming an embedded electronic systems engineer
Employer Description:By 2050, the planet could be using twice as much electricity compared to today. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs.
UKAEA leads the way in realising fusion energy, partnering with industry and research for ground breaking advancements with the goal to bring fusion electricity to the grid. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative.Working Hours :Monday to Friday, 08:15 - 16:30Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative....Read more...
Successfully complete the nationally recognised qualification specified within the apprenticeship standard: Electrical and electronic engineer (degree) / Skills England
Attend the designated training provider and develop a strong understanding of the technical knowledge and skills required for the role
Act as an ambassador for UKAEA by representing the organisation at external outreach, engagement, and careers events
We provide reactive service via tickets, to test and repair systems such as control & instrumentation, data acquisition, sensing, robotics and power supplies. We can also design and deliver large systems in-group, including for example neutral beam power supplies as part of MAST-U-E
We have highly experienced engineers up to doctorate level, with extensive knowledge of power systems, magnetics, fusionics, sensing and other areas essential to working towards commercial fusion. Our engineers are available to consult on projects at any stage including concept and initial requirements
Training:
Through UKAEA’s Apprenticeship Scheme, you will build the technical expertise, practical experience, and wider professional skills required for both your current role and future career progression
This is achieved through a combination of formal off‑the‑job learning and on‑the‑job training within a real working environment
Training Outcome:
Working towards becoming an electronic engineer
Employer Description:By 2050, the planet could be using twice as much electricity compared to today. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs.
UKAEA leads the way in realising fusion energy, partnering with industry and research for ground breaking advancements with the goal to bring fusion electricity to the grid. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative.Working Hours :Monday to Friday
08:15 to 16:30Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative....Read more...
Siemens Healthineers is one of the world’s largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics and medical information technology.
We have an exciting opportunity for enthusiastic and aspiring individuals to join our Field Service Engineer Apprenticeship based in the M6 corridor (Stoke, Crewe, Warrington) region, beginning in August 2026.
This engineering apprenticeship will involve dedicated training on your journey to becoming a skilled Field Service Engineer in the healthcare industry and offers a favourable apprenticeship salary and benefits.
In this Field Service Engineer Apprenticeship role, you will join our field-based engineering team of approximately 200 engineers and be ultimately responsible for installing, repairing, and maintaining our medical systems. You will provide vital technical service support to our customers and work at hospital sites throughout the UK, initially focusing on customer sites within the M6 corridor (Stoke, Crewe, Warrington) region.
Duties include, but are not limited to:
Develop an understanding of relevant industry health and safety standards, regulations, and environmental and regulatory requirements.
Maintenance and operational practices, processes and procedures cover a range of plant and equipment.
Locate, and rectify faults in plant and equipment.
Communicate with and provide information to stakeholders in line with personal roles and responsibilities.
Read, understand and interpret information and work in compliance with technical specifications and supporting documentation.
Inspect and maintain appropriate plant and equipment to meet operational requirements.
Assess and test the performance and condition of plant and equipment.
Communicate, handover and confirm that the appropriate engineering process has been completed to specification.
Position, assemble, install and dismantle electrical plant and equipment, which may include motors, switchgear, cables and conductors, to agreed specifications.
Diagnose and determine the cause of faults in electrical plant and equipment.
Replace, repair or remove components in the electrical plant and equipment and ensure its return to operational condition.
You can also expect the following:
Travel to sites across your allocated region.
Attend other Siemens manufacturing sites across the country on temporary short-term assignments.
Visit the Siemens Healthineers Customer Care Centre in Camberley, Surrey.
Travel abroad to the Siemens Training Centres in Germany and the US as required.
Training:
Lead engineering maintenance technician - Level 4 HNC
To include:
Practical Skills Training to be delivered at a local college.
BTEC Level 3 Diploma to be studied at College on a day-release basis over the first 2 years of the programme - if level 3 not already achieved.
If Level 3 already achieved, will work towards achieving the Engineering HNC.
Portfolio of competence-based evidence to meet the Knowledge, Skills and Behaviours criteria as outlined in the Standard.
End Point Assessment.
Level 2 Functional Skills in maths and English (if required)
Training Outcome:
Upon completion of the Apprenticeship, you will have the opportunity to apply for a full-time position at Siemens. Healthineers as a Customer Service Engineer with the opportunity of further education and product training.
Employer Description:Our technology empowers customers to transform the industries that form the backbone of economies: industry, transportation, buildings and grids. Our solutions accelerate the digital transformation of multiple industries, to scale sustainability impact.Working Hours :Monday - Friday (Exact shifts to be confirmed).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
