Intel processor, (32 / 64 bit x86 families) Board Designer required to work on high specification single microcontroller boards. The ideal candidate will have experience of designing boards that exploit: PCI, (compact & express) bus for high speed, high performance applications, schematic design, power supply, digital and analog interfacing with Embedded C / firmware.
The successful candidate will work on the full design life cycle from definition to production and support. This is a senior hands on role but there are many opportunities to grow or recruit into a team lead or managerial position.
You will have Digital Hardware Design experience of:
32/64 bit microprocessors.
High performance bus architectures e.g. PCI, Rapid IO
Gigabit Ethernet
DDR4, DRAM or similar.
FPGAs
GPGPU
This is a fantastic opportunity for a competent Engineer looking for autonomy in design decisions.
....Read more...
Intel processor, (32 / 64 bit x86 families) Board Designer required to work on high specification single microcontroller boards. The ideal candidate will have experience of designing boards that exploit: PCI, (compact & express) bus for high speed, high performance applications, schematic design, power supply, digital and analog interfacing with Embedded C / firmware.
The successful candidate will work on the full design life cycle from definition to production and support. This is a senior hands on role but there are many opportunities to grow or recruit into a team lead or managerial position.
You will have Digital Hardware Design experience of:
32/64 bit microprocessors.
High performance bus architectures e.g. PCI, Rapid IO
Gigabit Ethernet
DDR4, DRAM or similar.
FPGAs
GPGPU
This is a fantastic opportunity for a competent Engineer looking for autonomy in design decisions.
....Read more...
Position: Workshop Engineer
Job ID: 1298/103
Location: Newcastle (with potential UK travel)
Rate/Salary: Around £33,000 (depending on experience) + 0vertime
Benefits: 25 days holiday + statutory | 3% contributory pension
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Workshop Engineer
Typically, this person will be working as a diesel fitter within a workshop environment, either independently or as part of a small team. The role reports to the Workshop Manager, with a dotted line to the Operations Manager. The key focus is on performing engine overhauls and related tasks while maintaining high standards of quality and safety.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the Workshop Engineer:
Carry out medium and high-speed engine overhauls
Perform all assigned jobs in line with technical and work instructions
Maintain communication with the manager to coordinate workload and spare parts requirements
Submit accurate job documentation and time sheets on time
Attend team briefings when required
Identify opportunities for additional work and report to management
Ensure tools and equipment are maintained, calibrated, and fit for purpose
Carry out routine maintenance and fault correction on equipment
Maintain a clean and organised work area
Adhere to all health, safety, and environmental protocols
Work in line with the company Quality Management System and client specifications
Provide additional support to the engineering function as needed
Qualifications and requirements for the Workshop Engineer:
Provide additional support to the engineering function as needed
Familiarity with diesel fitting in marine or industrial applications
Essential:
Proven experience with medium and high-speed engines and associated ancillary equipment
Solid understanding of health, safety, and environmental practices
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Electrical Maintenance Engineer - Tower Bridge, London - Up to £48,000 Per AnnumExciting opportunity to work for an established FM Property company based in Tower Bridge, London. I am currently recruiting for an Electrical Maintenance Engineer to be based at a large private luxury residential development situated by Tower Bridge, London. The successful candidate will be a fully qualified Electrical Maintenance Engineer with a proven track record in commercial / property building maintenance. He or she will be required to carry out electrical planned and reactive maintenance across this large static site as part of a 1 person team.Working with the maintenance team on site, He or she will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary, overtime and the chance to work at this very unique and interesting site.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingFire AlarmsFault Finding BMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsElectrical InstallationsRemedial worksPositions Available The client is Looking for 1 x Electrical Mechanical Maintenance Engineer (£48K) Hours of work Monday to Friday - 08:00am to 17:00pm (40 hour week)RequirementsElectrically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3 A proven track record in commercial or property maintenance Excellent customer service skillsHappy to cover a large site Ideally experience in High End ResidentialHonest, hard working and reliablePackageUp to £48,000 per annumOvertime available 25 days holiday + BHCompany PensionNO CALL OUTPlease send your CV to Charlie Long at Cbw Staffing Solutions for more Information!....Read more...
Working from engineering drawings, data and documentation in order to undertake the manufacture, installation, testing, commissioning, fault diagnosis, maintenance, overhaul and removal of mechanical and fluid power equipment on ships and submarines involved in defence and commercial shipping. This can include propulsion machinery, weapons, and auxiliary systems (such as water, air conditioning and power generation)
Gaining knowledge and expertise in the use of common and specialist machine and hand tools, and the use of a variety of measuring and diagnostic equipment and processes to ensure individual components and assemblies meet the required specification
Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business, there is a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
As a Development Engineer Higher Apprentice at National Grid, you’ll be part of our Customer Network Development (CND) team, playing a key role in connecting homes, businesses, and communities to the energy network.
Being a part of this team, you will contribute to National Grid’s mission to enable the energy transition and support a more sustainable future. CND is actively redesigning how customers are connected to energy to looking at how to reduce lead times and improve customer satisfaction, as a Development Engineer Higher Apprentice you will be part of that innovation.
Within this role you help design and deliver technical solutions, working closely with industry partners and customers to ensure everything runs smoothly and meets the highest standards. This will include:
Support the design of energy network connections, including electrical layouts and infrastructure planning, to meet customer needs
Analyse data and assess project feasibility, helping inform smart decisions about network capacity and connection optionsCollaborate with customers, project teams, and regulators to gather requirements and ensure projects stay aligned and on track
Gain hands-on experience through site visits, inspections, and solving technical challenges during the development process.Play a key role in connecting new customers to the energy network, while learning essential engineering and project delivery skills
You must already have a full valid UK driving license in place at the point you make your application
Training:
Electrical Power Networks Engineer Level 4 (Higher national certificate) Apprenticeship Standard
Training Outcome:
Upon successful completion of the programme, you will join National Grid as a Development Analyst
Employer Description:National Grid is at the heart of the energy future, and our people are at the heart of National Grid. We’re 30,000 colleagues strong. In the UK, National Grid don’t generate or sell energy – we join the dots to get energy from A to B. From making a cup of tea in the morning, to keeping the lights on in hospitals, our electricity network puts power in the hands of people. Without it, the world as we know it would grind to a halt.
The world of energy is changing beyond recognition as we focus on building a cleaner, greener future. Working at National Grid, you won’t just be touching the lives of almost everyone in the UK – you’ll be shaping the way we use and consume energy for generations to come.
Net-zero targets are transforming the way we work and increasing the scope of the positive impact we can make. Right now, we’re looking for apprentices to join us.
Our people in Network Services work across a number of teams to keep the lights on for our customers. They might be helping a customer who has lost supply or supporting a developer building a multi-million pound project.
They maintain a 24/7 service from faults and maintenance, asset replacement to new connections, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts, their work is critical to everything we do.Working Hours :Monday - Friday, daytime hours (0800 - 1600, 0900 - 1700)Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Patience,Adaptable,Safety,Reliable,Responsible....Read more...
Mobile Electrical Maintenance Engineer - FM Service Provider - Commercial Buildings - Somerset & Surrounding Counties - Up to £43,000 Exciting opportunity to work for an established FM service provider situated in Bristol. CBW is currently recruiting an Electrical Maintenance Engineer to be based across commercial environments, including mainly schools & offices, as well as various other commercial buildings. The successful candidate will be a fully qualified Electrical Maintenance Engineer with a proven commercial/property building maintenance track record. He or she will be required to carry out Electrical planned and reactive maintenance. PackageSalary up to £43,000Private Medical care for employee and family8% contributory pensionSick payContinued trainingSports and social club24 days holiday + Bank Holidays - You can also purchase extra holidaysSubsidised gym membershipChild care voucher schemeKey Duties & ResponsibilitiesLighting (Small installation, Fault-finding, Lamping, Changing ballasts, Control panel, Power distribution)Emergency lightingSmall works – new sockets, new lights, new circuitsAssisting in the mechanical & fabric maintenance on siteAny reactive and planned maintenance on siteHours of Work Monday to Friday (40-hour week) 08:00 am to 17:00 pm RequirementsElectrically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2 Essential City & Guild/NVQ Level 3 Essential City & Guilds - 18th EditionA proven track record in commercial or property maintenance Installation experienceExcellent customer service skillsHappy to cover a large site Honest, hard-working and reliablePlease email your CV to Archie Reed at CBW Staffing Solutions to avoid missing the opportunity.....Read more...
Senior Antenna / RF Engineer
Location: Lincoln, Lincolnshire, UK
An excellent opportunity for an experienced Senior Antenna / RF Engineer to join a newly established R&D capability within a leading global RF technology group. This role focuses on the design, simulation, and development of advanced antenna and RF subsystems across HF to SHF frequencies for applications including defence, aerospace, naval, space, and high-reliability electronic systems.
This position is ideal for a highly motivated, innovative, and hands-on engineer with extensive RF and antenna experience, who thrives on solving complex technical challenges, mentoring junior engineers, and shaping the development of a growing UK R&D team.
Main Responsibilities of the Senior Antenna / RF Engineer based in Lincoln, UK:
Lead the design, simulation, and development of antenna and RF systems from concept through to final delivery, including prototyping, testing, and production handover.
Act as technical lead on projects, managing design activities, making architectural decisions, and mentoring junior engineers.
Develop mixed-signal and system-level designs, including digital control and power subsystems, custom test hardware, and RF circuits (filters, amplifiers, switches).
Conduct PCB layout, population, and construction of prototypes.
Perform RF, antenna, and EMC testing, and oversee product qualification including environmental and functional testing.
Collaborate with electronics, systems, and other engineering disciplines to integrate solutions and ensure high-performance outcomes.
Produce technical reports, customer-facing documentation, and present findings internally or externally at conferences.
Support proposal generation, requirements development, conceptual design, and design reviews with customers and management.
Requirements of the Senior Antenna / RF Engineer based in Lincoln, UK:
Extensive experience in RF and microwave engineering and antenna system design.
Proficient in simulation and design tools such as CST, HFSS, Keysight Microwave Office, ADS, or similar.
Experience in MATLAB for modelling and analysis is highly desirable.
Strong practical, hands-on experience with real-world RF and antenna projects, including prototyping and test equipment development.
Experience leading design projects and mentoring junior engineers.
Comfortable working collaboratively across teams and communicating effectively with customers and senior management.
Experience in defence-related applications preferred; telecoms/network engineering not required.
Flexible, resilient, and highly accountable with a mission-oriented approach.
Fluent in English; additional languages beneficial.
Strong understanding of electromagnetic theory, physics, and mathematics.
To apply for this Senior Antenna / RF Engineer role based in Lincoln, UK, please send your CV to: kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784
....Read more...
The Job Product Development Engineer
The Company:
A leading manufacturer and systems engineering company who operate globally
Leading manufacturer within Hydraulics including Pumps, Valves, Motors & Systems
Offering world class products and newly designed products and systems to the Industrial and Off Highway Hydraulic market
Good opportunities for career growth and excellent training and professional development
Benefits of the Product Development Engineer
Salary £35k - £50k depending on experience
Pension
Laptop
25 days annual leave rising to 30 with service + bank holidays
The Role of the Product Development Engineer
You will be involved in supporting operations and helping with running of the factory, keep drawings up to date etc…
You will be responding to customer requests & making changes and tweaks to existing products to fit their requirement
You will also be involved in new product development such as increasing power/pressure for clients - digitalisation/electrification etc… As well as designing brand new products which will be used in the future
Working with customers on prototyping, lots of project work and software development. Doing design work on AutoCAD Inventor.
Design for Hydraulic Pumps, Motors, Valves & Systems as well as the software and controls etc...
Work within Industrial and Off Highway, Mobile OEM, Marine etc...
Writing technical reports and doing product development
Lead and oversee new product development projects
The Ideal Person for the Product Development Engineer
Degree qualified in a relevant engineering discipline - ideally a masters within Mechanical, Mechatronic, Integrated, Systems Engineering or maybe Electrical/Electronic Engineering.
Good Mechanical knowledge with ideally some knowledge around embedded electronics, software programming etc...
May consider a straight or recent graduate at the bottom end of the salary scale, though happy with experienced person at the top end.
Great if have design exp with Autodesk Inventor but MUST have design experience, not just a draughtsman.
Able to design and create technical products.
Consider good design/product development experience within any Mechanical products such as Pneumatics, Pumps, Valves, Motors, Gearboxes etc...
Good communications, team player, good eye for detail, driven, ability to write reports.
If you think the role of Product Development Engineer is for you, apply now!
Consultant: Bjorn Johnson
Email: bjorn@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
The Company:
Sells automation equipment to OEMs and Industrial End Users
Deals in Drives and Controls.
Been in operation since the 1960s
Experts in electronic and electrical parts and products for factory automation
The Role of the Internal Sales Engineer
Deliver excellent customer service
This is an office based role in East Kilbride. Not remote.
Build and maintain successful partnerships with customers, colleagues and suppliers and focus on the achievement of long-term customer loyalty
Consistently generate profitable sales for the branch, via the telephone by effectively using a range of techniques and resources
Identify and action appropriate steps to rectify any shortfalls
Manage customer queries in relation to invoices, orders or stock
Understand the customer cycle by proactively targeting new customers and developing them into consistent live trading accounts
Embracing digital channels to enhance the customer offering by proactively promoting the webshop and other digital offerings.
Collaborating with customers, colleagues and suppliers by supporting with promotions, sales events, supplier days and new product launches
Utilising IT systems such as Workspace, Power BI and Microsoft Office to support the customer experience.
Supporting in other areas of the branch as required
Benefits of the Internal Sales Engineer
£32k-£40k salary
Annual Incentive scheme
Pension
25 days’ holiday + bank holidays
The Ideal Person for the Internal Sales Engineer
Experience of working in a highly competitive customer focused role (B2B, B2C)
Experience of working within a sales / target driven role
Proactive mind set
Would consider graduates in an engineering discipline
To be customer centric with a customer service background
To demonstrate proactive sales via phone, face-to-face & online
To have had experience of working in a fast-paced role, whilst maintaining a consistent eye for detail
A flexible approach and an ability to work under pressure
Independence
An ability to recognise sales opportunities
An ability to embrace change and new technologies
If you think the role of Internal Sales Engineer is for you, apply now!
Consultant: Joshua Cumming
Email: joshuac@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
Electrical Maintenance Engineer – FM Service Provider – Canary Wharf – £47,500 + Package Are you a Electrical Maintenance Engineer looking for a new challenge? Would you like to work for a leading Facilities Maintenance provider?CBW Staffing Solutions are currently recruiting for a Electrical Maintenance Engineer to carry out planned and reactive commercial maintenance across a High-end residential contract. The successful candidate will have a strong understanding of Facilities Maintenance and have a proven track record in commercial building maintenance. This position would be ideal for a Electrical Maintenance Engineer currently in a similar position who is keen on progression. In return, the company are offering a competitive salary of up to £47,500 with a potential route into further career progression. You will be working within a small team on site to deliver landlord services. Key duties & ResponsibilitiesCarry out all aspects of M&E/Fabric maintenanceLighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lighting testsAir Handling Unit’sBuilding Management SystemsAir Conditioning equipmentCold Water systemsHeating and Ventilation systemsEmergency lightingFan Coil UnitsHIU'sWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)Escort / organise sub contractorsAttend client meetings if requiredEnsure site log books are kept up to dateHours of Work & Package InformationBasic Salary of up to £47,500Call out - 1 in 2Monday to Friday 08:00-17:00 / 10:00 – 19:0020 days holiday + Bank HolidaysTablet & Work Phone ProvidedFull company uniform RequirementsElectrical - City & Guilds Level 2 & 3 (Essential)18th EditionMust be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsClient FacingIf you are interested in this position please send your CV to Dan Barber of CBW Staffing Solutions to avoid missing out on this opportunity!....Read more...
Multi-Skilled Maintenance Engineer - Bayswater, West London - Up to £48,000 Per AnnumExciting opportunity to work for an established FM Property company based in Bayswater, West London. I am currently recruiting for an Mechanical or Electrical Maintenance Engineer to be based at a large private luxury residential development situated by Queensway Station, West London. The successful candidate will be a fully qualified Mechanical or Electrical Maintenance Engineer with a proven track record in commercial / property building maintenance in High End Residential properties. He or she will be required to carry out M&E/Fabric planned and reactive maintenance / Installation across this large static singe person site.Working with the maintenance team on site, He or she will be required have an understanding/hands on experience of the below. In return the company are offering a competitive salary, overtime and the chance to work at this very unique and interesting site.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsGeneral building fabricSwimming pool maintenancePositions Available The client is Looking for 1 X Mechanical or Electrical Maintenance Engineer Hours of work Monday to Friday - 08:00am to 17:00pm (40 hour week)RequirementsMechanically or Electrically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3 A proven track record in commercial or property maintenance Excellent customer service skillsHappy to cover a large site Ideally experience in High End ResidentialHonest, hard working and reliablePackageUp to £48,000 per annumOvertime available 25 days holiday + BHCompany PensionNO CALL OUTPlease send your CV to Dan Barber at Cbw Staffing Solutions for more Information!....Read more...
Electrical Shift Engineer - Parking On-Site - FM Service Provider - Law Firm - Canary Wharf - Up to £56,080 (Inclusive of Shift and AP Allowance) Are you a Shift Engineer looking for a new challenge? If the answer is yes, then read on... A Fantastic opportunity to work for a leading FM Service Provider situated in Canary Wharf. CBW is currently looking for 4 Electrical Shift Engineers in a critical law firm located in Canary Wharf. The successful candidate will be Electrically biased (NVQ, C&G, 18th Edition etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following. In return, the company is offering a competitive salary of £56,080 (Inclusive of Allowances) with great opportunities for further training and career progression, including LV & HV AP training. PackageUp to £50,300 + 10% Shift Allowance (£55,350)HVAP Allowance - £750 (Total including HV - £56,080)23.5 days shift holiday Near unlimited OT due to ongoing projectsCompany pension Season Ticket LoanParking On-siteGreat opportunity to get put through HV TrainingDuties & Responsibilities:Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsPumps, motorsWater TreatmentBMS System - Monitor (i.e. Hot & Colds)UPS Systems - Monitor / Take readingsHours of work 1x Continental Shift Pattern - Days & Nights – 07:00 am to 19:00 pm & 19:00 pm to 07:00 am RequirementsLevel 3 in Electrical Instalations(C&G, NVQ etc)18th EditionAM2 (Desirable)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Knowledge of UPS / Generators / Power Distribution / HVAC / HV LVGood Leadership & Management skillsHigh desirablePrevious experience in a Critical environmentPrevious experience in a corporate environmentHigh Voltage certified (Current or Expired)If you are interested please email your CV to Archie Reed of CBW Staffing Solutions to avoid missing out! ....Read more...
Fault finding and repair, planned maintenance and operating the mechanical equipment used to manufacture our products.Fault finding on energised systems - including extra low voltage electrical, hydraulics and pneumatics, and power presses.Programmable Logic Control (PLC) programming support to maintain production processes.Planned maintenance on mechanical and control production equipment such as extra low voltage electrical, hydraulics and pneumatics, and power presses.Knowing, understanding and carrying out the correct use of gauges measuring equipment and recording Statistical Process Control (SPC) data for quality purposes.Knowing, understanding and carrying out the basic operations of a machine to: Operate the machine safely and manage risk.Set the machine.Repair the machine, using common fault-finding techniques. Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmedSkills: Communication skills,Organisation skills,Team working....Read more...
Job Title: Marine Electronic Commissioning Engineer – Home Based (EMEA Travel)
Job ID: 1420/19
Location: Home Based (EMEA Travel)
Rate/Salary: To be advised upon application - Discretionary to discuss with consultant
Benefits: Excellent company benefits package
Type: Permanent
About the Company
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors. For a full list of vacancies, visit www.hsbtechnical.com.
Our client is an established and well-regarded business with a global reputation for quality and innovation within the maritime sector.
Position Overview – Marine Electronic Commissioning Engineer
The Marine Electronic Commissioning Engineer will be responsible for the commissioning, maintenance, and technical support of high-performance mechanical products with electronic control systems.
The role covers the EMEA region (Europe, Middle East & Africa) and involves working on major MOD clients’ vessels, including:
Coastguard and Police boats
Royal Navy Pacific Fleet vessels
Workboats
Fast Ferries
This position requires frequent travel — typically 5-day assignments with most weekends spent at home. You will act as the company’s on-site representative, providing hands-on support to customers, distributors, and service agents across the region.
Key Duties and Responsibilities – Marine Electronic Commissioning Engineer
Commissioning: Perform installation checks, configuration, and commissioning of systems, including sea trials, class trials (DNV, BV, ABS), and Dynamic Positioning trials.
Maintenance and Repairs: Conduct inspections, routine maintenance, and troubleshooting of electronic and mechanical systems to ensure optimal performance.
Customer Support: Provide remote and on-site technical assistance, resolving customer issues efficiently and professionally.
Training and Documentation: Deliver user training and produce accurate technical documentation, manuals, and service reports.
Field Testing: Collaborate on field tests and provide feedback for product improvement.
Collaboration: Work closely with engineering, project management, and sales teams to ensure smooth delivery and customer satisfaction.
Safety and Compliance: Adhere to all relevant safety standards and conduct risk assessments during field operations.
Continuous Learning: Maintain up-to-date technical knowledge and attend relevant training or seminars as required.
Qualifications and Requirements – Marine Electronic Commissioning Engineer
Education: UK Level Electrical certifications higher in Electrical Engineering, Electronics, or a related field.
Experience:
Minimum of 3 years’ experience as a Field Service or Commissioning Engineer (preferably maritime).
Candidates from military, automotive, or related technical backgrounds will also be considered.
Technical Skills:
Strong understanding of electronic control systems, with knowledge of mechanical drive systems, bearings, and hydraulics.
Proficient in diagnostics, fault finding, and system testing using appropriate tools and software.
Travel Flexibility: Must be willing to travel extensively across EMEA, including working onboard vessels at sea.
Communication Skills: Excellent written and verbal communication with the ability to convey technical concepts clearly.
Customer Focus: Committed to providing exceptional service and building lasting client relationships.
Teamwork: Strong problem-solving, collaboration, and self-management abilities.
This vacancy is being advertised by HSB Technical Ltd, who have been appointed as the recruitment partner for this role.....Read more...
As an Electricity Network Planning Engineer Higher Apprentice at National Grid, you’ll be part of the Electricity Transmission Network Operations and Intelligence team helping to keep the UK’s energy flowing safely and efficiently.
You’ll play a key role in making sure our electricity network is well-maintained and ready to meet the demands of a cleaner, greener future.
You will be part of a team that’s driving innovation projects to strengthen the network and support the UK’s journey to net zero carbon emissions by 2050. From planning how we upgrade our systems to helping deliver more clean energy across the country, your work will directly contribute to building a more sustainable world.
Within the Electricity Network Planning Engineer Higher Apprentice role you will learn how the network operates, collaborate with teams across the business, and contribute to delivering complex projects on time, on budget, and to high standards.
Key responsibilities of the role include:
Plan and package projects helping to organise and bundle different types of work including maintenance, upgrades, and customer connections into efficient, deliverable plans
Work with experts across teams, collaborating with engineers, planners, and customer teams to create realistic and achievable project timelines
Understanding asset priorities by learning how to interpret asset data and strategies to help decide which projects should be prioritised
Balance complex investments and support the planning of large-scale investments, making sure they’re scheduled in the most cost-effective and efficient way
Keep plans accurate and up to date by regularly reviewing and updating your project portfolio, ensuring all data is correct and timelines are achievable
You will need to have a valid UK driving licence within the first 12 months of starting the programme.Training:
Electrical Power Networks Engineer Level 4 (Higher national certificate) Apprenticeship Standard
Working towards a HTQ in Electrical/Electronic Engineering and our National Grid Training Academy in Eakring
Training Outcome:
You’ll become a qualified Network Planning Engineer
Employer Description:National Grid is at the heart of the energy future, and our people are at the heart of National Grid. We’re 30,000 colleagues strong. In the UK, National Grid don’t generate or sell energy – we join the dots to get energy from A to B. From making a cup of tea in the morning, to keeping the lights on in hospitals, our electricity network puts power in the hands of people. Without it, the world as we know it would grind to a halt.
The world of energy is changing beyond recognition as we focus on building a cleaner, greener future. Working at National Grid, you won’t just be touching the lives of almost everyone in the UK – you’ll be shaping the way we use and consume energy for generations to come.
Net-zero targets are transforming the way we work and increasing the scope of the positive impact we can make. Right now, we’re looking for apprentices to join us.
Our people in Network Services work across a number of teams to keep the lights on for our customers. They might be helping a customer who has lost supply or supporting a developer building a multi-million pound project.
They maintain a 24/7 service from faults and maintenance, asset replacement to new connections, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts, their work is critical to everything we do.Working Hours :Monday - Friday, 9.00am - 5.30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Adventurous,Safety awareness,Resilient....Read more...
Electrical Engineer – Barnstaple, Devon
Job Type: Contract Inside IR35
Rate: £45-55 p/h
Our client is looking for an Electrical Engineer to help deliver mission-critical electrical systems for ships, weapon systems, and communication platforms. If you’re a hands-on, detailed-driven individual…then this is the perfect role for you!
What You’ll Do
Design and develop electrical systems for sonar, control, and power distribution.
Integrate subsystems into complex defence platforms.
Ensure compliance with MIL-STD, DEF STAN, and EMC standards.
Run testing, validation, and qualification activities.
Produce clear schematics, test documents, and design reports.
Troubleshoot electrical issues across development and in-service equipment.
Support upgrades, obsolescence, and new technology adoption.
Work closely with mechanical, systems, software, and supplier teams.
What You Bring:
Strong electrical system design and analysis skills.
Confident problem solver with a methodical approach.
Experience in defence/aerospace/marine environments.
System integration experience on ships or other large platforms.
Hands-on testing and validation capability.
Solid knowledge of MIL-STD, DEF STAN, EMC.
Skilled documentation and attention to detail.
Team player with strong communication skills.
Experience with Zuken E3, AutoCAD Electrical, or similar tools.
Qualifications:
HNC/HND in Electrical Engineering
Minimum 5 years’ experience in electrical disciplines
Security Requirements:
UK Sole National
BPSS Cleared
Able to obtain SC
If you’re a skilled Electrical Engineer, ready to take on their next role, then please apply and drop your CV below!....Read more...
Senior Critical Shift Engineer – Continental Shift - St Paul's, London - £63,000 + package Location: Critical Building, St Pauls, LondonSalary: Up to £63,000 per annum Overview:Our client is seeking a qualified Senior Critical Shift Engineer to join the maintenance team of a critical commercial building in St Paul's, London. The ideal candidate will comes from a strong critical background and hold electrical qualifications (C&G / NVQ). This role offers hands-on electrical and multi-skilled work, with opportunities for further training and career progression. Package Includes:Salary up to £63,000 per annumUniform and tools suppliedCycle to Work Scheme20 days holiday Plenty of overtime Overtime opportunitiesPension schemeInternal progression and development opportunitiesHours of Work: Continental Shift:4 nights on / 4 off / 3 days on / 3 nights on / 6 off / 4 days onShift times: 07:00 – 19:00 / 19:00 – 07:00Key Duties & Responsibilities:Electrical maintenance including lighting, fault-finding, small installations, lamping, ballast changes, control panels, and power distributionEmergency lighting inspections and maintenanceConduct complex electrical fault-finding and rectification across power distribution, control panels, and essential services.Adhere to the Safe System of Work (SSoW) for HV and critical low-voltage operations.Perform scheduled maintenance, fault-finding, and load-testing on Static and Rotary UPS systems and associated battery banksChiller re-sets and first-line troubleshootingWater treatment monitoring (temperature checks)BMS system monitoring (hot & cold checks)Perform all allocated tasks professionally and within allocated timeframesProactively identify, report, and resolve faults with building services equipmentMaintain health & safety compliance, reporting/escalating issues where requiredMaintain clear communication with client staff and site management regarding service issuesEscort specialist subcontractors when requiredBe flexible with site attendance and tasks within competencyRequirements:Electrically qualified (C&G, NVQ, or equivalent)18th Edition Wiring Regulations knowledgeBackground working in or with critical systems (Essential)Ability to provide trade certificates (essential)Current or expired High Voltage approved personProven track record in commercial building maintenanceMulti-skilled (electrical, mechanical, and general building services)Strong communication and customer service skillsMust be able to attend site for a 07:00 am startInterested candidates should contact: Alex Denton – CBW Staffing Solutions....Read more...
FPGA Engineer required to develop state of the art video processing, distribution and interfacing systems. You will join a team of creative hardware engineers, designing video products and developing new products in high-performance real-time video. You will design and test digital video processing products using application processors and FPGAs and be responsible for FPGA IP development and integration of video processing, distribution and control logic.
This includes integration of vendor or locally produced IP, logic and algorithm implementation in RTL, constraint management, synthesis, place and route, simulation, test and debug using the latest FPGA development tools.
Key skills
FPGA technology including VHDL.
Embedded design, low level hardware and systems.
CAE tools.
First Degree (or equivalent) qualification in electronics or another relevant subject.
Hardware design engineering commercial experience.
FPGA peripheral interfaces: pcie: DDR3/4: high-speed transceivers.
Video interfaces: HDMI: HDCP: DisplayPort
Role Responsibilities
Work with managers and senior technical staff to develop digital products and their associated designs.
Advising on board level design for FPGA power-supply specification, I/O pin placement signal type, board bring-up and hardware debug. ....Read more...
FPGA Engineer required to develop state of the art video processing, distribution and interfacing systems. You will join a team of creative hardware engineers, designing video products and developing new products in high-performance real-time video. You will design and test digital video processing products using application processors and FPGAs and be responsible for FPGA IP development and integration of video processing, distribution and control logic.
This includes integration of vendor or locally produced IP, logic and algorithm implementation in RTL, constraint management, synthesis, place and route, simulation, test and debug using the latest FPGA development tools.
Key skills
FPGA technology including VHDL.
Embedded design, low level hardware and systems.
CAE tools.
First Degree (or equivalent) qualification in electronics or another relevant subject.
Hardware design engineering commercial experience.
FPGA peripheral interfaces: pcie: DDR3/4: high-speed transceivers.
Video interfaces: HDMI: HDCP: DisplayPort
Role Responsibilities
Work with managers and senior technical staff to develop digital products and their associated designs.
Advising on board level design for FPGA power-supply specification, I/O pin placement signal type, board bring-up and hardware debug. ....Read more...
This Trainee Mechanical Technician role will offer the successful candidate the chance to undergo comprehensive training and development to become a skilled engineer in the coming years.E3 Recruitment are proudly working with a Huddersfield based employer who are currently searching for a Trainee Mechanical Technician to join their team on a permanent basis.This employer is Huddersfield based and is easily commutable from Halifax, Bradford and Wakefield.For the Trainee Mechanical Technician role, we are keen to receive applications from individuals who possess the following:
Previous experience working in a hands-on, similar environment in a position such as Assembly Fitter, Service Engineer Operative, Manufacturing Operative, Production operative or equivalent
Good hands-on skills, with the ability to effectively use hand, power and air tools
The ability to read, interpret and work from engineering drawings
The willingness to undergo internal & external training in order to develop skills and obtain qualifications
Details of the Trainee Mechanical Technician include:
Starting Salary: £26,000.00 - £28,000.00 depending on previous experience (increasing in the future as training progresses)
Comprehensive training offered – potentially included funded Level 3 qualifications
Enhanced holiday allowance
Various health & well being perks, including private healthcare, EAP and cycle to work scheme
To apply for the Trainee Mechanical Technician role, please click “Apply Now” and attach an updated version of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information.....Read more...
Electronics Test Engineer
Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham. Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply!....Read more...
• In the Platform Nuclear Engineering Department (PNED) you would be responsible for ensuring the nuclear reactor is safely designed, built and tested, providing the power the submarine needs to protect the nation. • PNED engineers collaborate with diverse teams to deliver a reliable and secure reactor, necessitating strong communication skills and meticulous attention to detail. • PNED directly impact the construction and commissioning of the reactor at the Barrow site. By addressing emerging issues, reviewing formal documents, and facilitating site inspections.• If you are seeking hands-on experiences beyond traditional office settings, PNED offers exciting opportunities to provide engineering support directly on submarines.Training:Level 6 Nuclear scientist and nuclear engineer (integrated degree) apprenticeship.
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmedSkills: Communication skills,Organisation skills,Team working....Read more...
Site Electrical Maintenance Engineer – Canary Wharf, East London - Up to £48,000 per yearSalary: £48,000Hours: Monday-Friday split shift:- week- 7.00am – 16.00pm week 2:- 9.00am – 18.00pmLocation: Canary Wharf, East London About the RoleOur Client are looking for an Electrical Maintenance Engineer to join their on-site team at a prestigious commercial office building in Canary Wharf. You’ll be responsible for delivering high standards of planned and reactive maintenance to ensure the smooth operation and safety of all electrical systems and building services. Key ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive tasks across the site.Diagnose and repair electrical faults efficiently to minimise downtime.Ensure all work is completed in line with health and safety regulations.Support building services operations including lighting, power, and emergency systems.Work collaboratively with the wider facilities team to maintain a high-quality service environment.RequirementsNVQ Level 3 or equivalent in Electrical Installation or Maintenance (essential).18th Edition Wiring Regulations qualification (essential).Proven experience in commercial building maintenance.Good understanding of general HVAC and mechanical systems (desirable).Strong fault-finding skills and a proactive, hands-on approach.What’s on OfferCompetitive salary of £48,000.Excellent working environment in a modern office building. Season ticket reduction.private health care.25 Days holiday. Opportunities for training and career progression.If interested, please get in touch with Dylan Briggs at CBW Staffing Solutions.....Read more...
Mechanical Maintenance Engineer - Stratford, East London - Up to £50,000Exciting opportunity to work for an established FM service provider situated in Stratford, East London. My client is looking for a Mechanical Maintenance Engineer to be based in a unique commercial estate in Stratford, East London. The successful candidates will be Mechanically biased (C&G) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Blue chip office etc). Working with the large maintenance team on site, He or she will be required to carry out electrical, mechanical and fabric maintenance to the following. In return the company are offering a competitive salary of up to £50,000 + overtime, further training and career progression.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingHydraulics and PneumaticsHVACAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS SystemsUPS Systems Hours of workMonday to Friday08:00 - 17:00 Plenty of Overtime25 Days Holiday + 1 Day for BirthdayParking on SiteRequirementsCity & Guilds - Level 2 Mechanical minimum You must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsPlease send your CV to Dan Barber at CBW Staffing Solutions today for more information. ....Read more...
