Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe BESS Field Service Engineer will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
You’ll be placed on a structured programme gaining the knowledge and skills to be able to join one of our dedicated operational teams at the heart of the business.
We are recruiting our engineers for the future, and we are offering a great opportunity for anybody looking to start a career within the water industry.
This is a real job with real rewards. You will be learning about new and innovative technologies that will improve the way we work at Thames Water for years to come.
During the apprenticeship you will carry out following activities:
Work on various pumps and associated control gear, 3-phase motors, starters, and controls
Investigating and diagnosing complex faults and carrying out repairs during incidents
Investigating plant failures and carrying out repairs as quickly and efficiently as possible
Planned preventative and general maintenance of equipment
We are offering training, qualifications, real life experience and the opportunity to "Earn while you learn". This is a real job with real rewards.
This is a great opportunity to learn the essential skills that are already in high demand across the industry and will set you on the path to your future career.Training:
You will complete the Level 3 Maintenance Operations Engineering Technician Apprenticeship Standard - Mechanical Pathway
Included in the blended learning programme you will also complete the Level 3 City & Guilds Diploma in Engineering
We work in partnership with Basingstoke College of Technology who deliver the programme, you will be expected to attend the campus in Basingstoke on fortnightly basis with the alternate week being virtual delivery, you may also be expected to attend college on block release, we will support your attendance by paying for your accommodation and travel expenses in line with our business expense policy. Training Outcome:
Permanent position
Employer Description:At Thames Water, our purpose is crystal clear - to deliver life’s essential service so our customers, communities and planet can thrive.
Water is life’s great leveller. Every living thing needs it, every single day. From people to plants, birds to bees, farms to factories, we all need it to thrive, and we’re committed to taking care of it for us all.
But keeping water flowing is becoming harder. From scorching summers to wetter winters, extreme weather affects everything from our pipes to our local rivers. We must keep millions more kettles boiling, public services operating, washing machines spinning, showers running and more, so every drop is more precious than ever. Are you ready to play your part?Working Hours :Start time 7.30am when onsite. Hours will vary when attending training or college.
Exact days and shift times to be confirmed.Skills: Communication skills,Team working,Well organised,Dedication to succeed,Logical thinker....Read more...
Catfoss Recruitment Ltd are currently in partnership with an Energy Generation Asset Management company that is looking to recruit several BESS (Battery Energy Storage System) Field Service Engineers in several locations around the UK to their expanding team on a permanent basis.Field Service Engineers required for the following areas: Manchester/Sheffield area, Bristol/Swindon area, South East (Essex/Kent) areaThe BESS Field Service Engineer will perform preventative maintenance, troubleshooting and warranty repairs along with commissioning activities on energy storage units at various BESS sites. This role is to report to the O&M Manager.Field Service Engineer (BESS) - Tasks & Typical duties/responsibilities:• Maintain Energy Storage Systems to a high standard by carrying out regular inspection and maintenance, annual capacity tests, trouble shooting and reactive maintenance works • Perform system software and firmware upgrades• Monitor operation performance monitoring and data assessment• Provide phone support and remote diagnostics to customers• Troubleshoot equipment located at BESS sites• Manage spare parts• Responsible for safety work complying with local safety regulations and safety standards • Conduct risk assessment and implement safety measures• Keep up to date with any administrative duties such as timesheets, daily vehicle checks and providing daily job logs describing issues and actions taken during service trips• Assist the in-house system engineering group in product development and/or project work• Provide suggestions based on field experience, to improve the products Field Service Engineer (BESS) - Essential Requirements:• Qualification in an electrical/ electro-mechanical discipline• Previous electrical or multi skilled maintenance experience• Basic IT skills (Word Processing, Outlook, Excel, IP and software for troubleshooting)• Qualification of working on Site safely• This role involves travelling to different sites with occasional overnight stays. Field Service Engineer (BESS) - Preferred Experience but not essential:• Working experience with BESS• Working knowledge of HV/LV power electronics including Inverters / Converters / Transformers• Previous HVAC training and F-Gas qualification• Strong understanding of IT related subjects, CMD, remote desktop connections, networking (subnet, VLANs, static IP/DHCP), MODBUS/TCP protocols• C&G2391-5 Test & Inspect or equivalent • Familiar with BS7671• HV authorised personField Service Engineer (BESS) - We offer:• Competitive salary based on experience and qualification• Holidays • Workplace pension• Full training, company van, sim card, fuel card and laptop will be provided• Team building events and employee learning opportunitiesField Service Engineer (BESS) previous suitable job titles: Service Engineer, BESS Engineer, PV Engineer, PV Technician, Service Technician, BESS Technician, Solar Technician, Solar Engineer, Electrical Engineer, Electrical Technician, Battery Energy Storage Engineer, Battery Energy Storage TechnicianPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Breedon is a home for inquisitive learners. Quarries, cement, and construction are no longer old-fashioned sectors. We’re providing the foundation for our lives, building the places where we live and work, play and in-between.
Are you interested in:
Being paid to go to college; earn as you learn, without having to ‘work the time back’
Achieving a Level 3 Advanced Apprenticeship in a sought-after engineering discipline
Full company funding of any fees for qualifications and training
No need to buy your own kit or any work equipment; it’s all on us.
A competitive salary significantly higher than the national minimum wage for apprentices
Support from a community of apprentices; a collaborative and comprehensive induction
A huge variety of potential career progression pathways at a stable, thriving business
As an Apprentice Electrical Maintenance Technician, you’ll support the vital need to uphold quarry site production.
You’ll be dismantling, examining, replacing, and reassembling mechanical and electrical systems and components.
Servicing and maintaining equipment.
Working on big yellow machinery to equipment that deals with dust, there will be lots to learn.
If you’re one to tiptoe around puddles with trepidation, maybe this role isn’t for you. You won’t be spending every day in a clean, corporate office swivelling on an office chair! If you have a natural affinity with the great outdoors, in all weathers, then now we’re talking!Training:You will complete a Level 3 advanced engineering technicians apprenticeship, where you will complete a 4 year programme. You will gain:
Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence)
BTEC Level 3 Diploma in Advanced Manufacturing Engineering
Depending on your location, you will either attend Macclesfield College on a day release basis for the duration of the apprenitceship or AMRC in Rotherham fulltime for the first 7 months and then day release.Training Outcome:
There are opportunities to not only become a qualified electrical maintenance technician, but also progress into area and management roles
Employer Description:Breedon is a leading construction materials group in Great Britain and Ireland.
Our GB division comprises fully-integrated aggregates and downstream products businesses throughout the UK . We supply aggregates, asphalt, ready-mixed concrete & mortar and concrete blocks, together with a range of specialist building products including clay bricks and tiles, other clay products, decorative aggregates and Welsh slate, which are sold throughout the UK and Ireland.Working Hours :Monday - Friday, shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
You’ll work in our power generation team gaining exposure to:
Planning, installation, repair and maintenance of power generation equipment.
At Aggreko, safety is at the heart of everything we do. As an apprentice, you’ll follow our ‘Safety for Life’ principles, actively engage in safety practices, and contribute to maintaining a safe and supportive working environment for everyone.
Support our technicians in performing routine checks, diagnosing faults, and troubleshooting mechanical and electrical issues.
Collaborating with teams across the business to enhance service delivery and contribute to larger, impactful projects.
Taking part in training opportunities to develop technical expertise and professional skills that will set you up for a successful career.
Working with power generation equipment.
Why join us as an apprentice?
Our programme is designed to give you a wide variety of professional experiences. You’ll work in an Aggreko depot and client sites, with opportunities to also support at world-class events.
Although we're sixty years old, it doesn't feel like it when you work here. You can expect the professionalism and high standards of a larger company – yet you won’t be pigeon-holed into a narrow role.
The sense of teamwork is unique – ‘together’ is one of our core values – and we make sure people feel welcome and included, so they can be themselves at work. Training:
You’ll follow a three-year apprentice programme linked with Newcastle College which will, at a minimum, lead to you attaining a Level 3 Maintenance and operations engineering technician qualification.
Training Outcome:Completing your apprenticeship will equip you with valuable skills, knowledge, and experience, setting the stage for the next step in your career. You could explore opportunities within Aggreko, whether at your local depot, in a field-based role, or even in one of our national or international locations. With the foundation you’ve built, the possibilities are wide open. Employer Description:Bring your energy. Grow your career.
At Aggreko, we provide energy solutions so communities can thrive and businesses can grow.
Across the UK and Ireland, our customers benefit from our expertise and the latest, cleanest, and most efficient technologies. From power generation to HVAC and oil-free air, we help a huge variety of operations to keep running.
Our teams in the UK also support customers around the world. The products we manufacture in Scotland, and service and maintain across the UK and beyond, cool gold mines in Australia, electrify events like the Olympics, power factories in Nigeria, warm neighbourhoods in Romania, and bring relief when hurricanes and wildfires strike.
We’re looking for motivated, agile and passionate people to help us make a difference.Working Hours :Monday - Friday, 8.00am - 4.30pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative....Read more...
You might be the type of person who
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart.
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work.
Likes working with tools, helping with DIY projects, or fixing things around the house.
Enjoys building models, coding, or experimenting with technology.
Loves getting stuck into real-world, practical challenges rather than just learning from books.
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems.
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply.
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected.
Travelling to different sites to keep our critical infrastructure in top condition.
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 apprenticeship with Stoke College.
You'll be required to attend the College on a block release, Monday lunchtime to Friday lunchtime.
There will be approximately 10 blocks per year.
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches.
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities.
Alternatively, there are other roles with specialism in power, policy and support.
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :Mon- Fri
This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK.Skills: Problem solving skills,Team working,Practical,Willingness to learn....Read more...
Showcase your vehicle servicing, maintenance, and repair skills in a vital role supporting essential services across North Wales. Working as part of a team of multi-skilled vehicle technicians, you'll undertake day-to-day activities that offer job satisfaction and opportunities for career progression. Key Responsibilities:
Diagnose and repair mechanical and electrical faults on a range of vehicles and equipment Maintain a clean, safe, and organised work environment Perform servicing and preventative maintenance as needed Provide out-of-hours emergency maintenance support as part of a rota system (subject to standby allowance) Work within a dedicated team of multi-skilled technicians, ensuring high standards of service delivery
To be considered for the Vehicle Technician role, you will need:
City and Guilds Level 3 Craft Certificate in Heavy Vehicle Maintenance and Repair (or equivalent)Experience in a commercial vehicle maintenance and repair environmentA full UK driving licenceAn LGV Category C driving licence (or working towards, with the ability to complete within probation)Working towards or holding the IRTEC Certificate of Competence to Master Technician status (with the ability to maintain once achieved) Strong communication skills and a methodical approach to organising and prioritising tasks to meet deadlines The ability to work both independently and as part of a team Welsh Level 2 competency (or the ability to achieve this within the 12-month probation period, with support provided) This role requires flexibility to travel to various locations across North Wales and involves working in inclement weather conditions
Please note that this post is subject to a Standard DBS Check and satisfactory references. What's on Offer:
Permanent, full-time (Monday to Friday) position with fixed hours, promoting a healthy work-life balanceCompetitive salary range of £34,314 to £37,035 per annum A supportive team environment with opportunities for ongoing development and training A chance to contribute to the safety and maintenance of critical servicesBased in Llandudno Junction; however, the role will involve travelling out to stations and other sites as required, i.e., if any vehicles or equipment breaks down, you may need to attend the site or incident location to resolve
If you are ready to take on this exciting challenge, we’d love to hear from you!....Read more...
On a daily basis, you’ll work within one of our service centres where you will learn to:
Service and repair a diverse fleet of specialist Powered Access machinery to meet company and manufacturer standards
Inspect and function test a wide range of equipment
Assess machines to ensure they meet the correct operational and safety guidelines
Diagnose and rectify complex electrical, mechanical and hydraulic faults
Order replacement parts and fit them correctly
Maintain accurate and comprehensive service and maintenance records
Develop in-depth product knowledge
Build excellent working relationships with customers and understand their business needs and requirements
Become an ambassador for our “Customer First” culture, resolving any issues quickly and keeping your colleagues and customers informed, so they feel truly valued
Expand your team working skills with your colleagues and the wider Sunbelt Rentals team
Manage multiple tasks and deadlines as part of a varied workday in a fast-paced operational environment
Training:You will be completing a level 3 Lift Truck and Powered Access Technician Apprenticeship Standard. This will be delivered using a combination of:
Workplace experience to gain practical skills
Guidance and training from an experienced workplace mentor
Industry recognised training leading to an apprenticeship qualification. You will attend residential placements at a training centre and may be required to travel outside your normal working hours
Training Outcome:Following successful completion of your apprenticeship, you will be offered a permanent role with one of the best rental equipment providers in the industry.
The size and scope of Sunbelt Rentals affords a wealth of opportunity for future progression. We are increasingly investing in developing the skills of our apprentices, with additional wide-ranging training opportunities built into the programme, and the development of possible higher-level qualifications and career pathways post-graduation.Employer Description:Sunbelt Rentals is the leader in equipment rentals in the UK, Ireland, US and Canada - as well as specialist operations in Europe. We provide a range of solutions to every market and sector, including construction, industrial, energy, infrastructure, government and events. Our teams make the impossible possible and the unthinkable doable. Turning what if into what is. Our people are at the heart of our values and they’re our greatest asset. We rely on you to look after our customers so in return, we take good care of you. We recognise the value and uniqueness of our team-mates and are committed to creating a diverse and inclusive Sunbelt Rentals, providing equality of opportunity and a culture of fairness and respect. Your health, safety and wellbeing is really important to us. We’re raising awareness and providing support through initiatives such as our mental health awareness campaign and first-aider programme. You’ll also be able to access a 24-7 employee assistance helpline, counselling services and financial wellbeing support.Working Hours :40 hours per week, in agreement with the manager, but Monday–Friday between the hours of 7.00am - 5.00pm e.g., 8.00am - 4.30pm. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Enthusiasm,Motivation to learn new skills....Read more...
You might be the type of person who:
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work
Likes working with tools, helping with DIY projects, or fixing things around the house
Enjoys building models, coding, or experimenting with technology
Loves getting stuck into real-world, practical challenges rather than just learning from books
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected
Travelling to different sites to keep our critical infrastructure in top condition
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 apprenticeship with Stoke College.
You'll be required to attend the college on a block release, Monday lunchtime to Friday lunchtime
There will be approximately 10 blocks per year
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities
Alternatively, there are other roles with specialism in power, policy and support
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hours Monday - Friday. This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK. Working hours TBCSkills: Problem solving skills,Team working,Practical,Willingness to learn....Read more...
Your first two years will be spent between your TrainCare Centre and Myerscough College in Preston where accommodation is arranged and provided through Northern
Here you will work on your engineering skills in a classroom-based environment
You’ll be mentored and supported throughout the process. When you’re not at college, you’ll be at your respective TrainCare Centre, following a guided learning path with your Apprentice Trainer
The following year you will have a number of placements in different departments at your Home Depot and during this time you'll learn all about engineering and other key elements of the business
Your role will be to: fault find, fix and repair defects on trains whilst also routine maintenance on many of our trains which could be both electrical and mechanical
You will embed all the information you've learnt, whilst expanding your knowledge and skillset by learning extra modules in electrics, fault diagnoses and more
Training:Rail Engineering Technician Level 3 Apprenticeship Standard:
Your apprenticeship training will take place at Northern, Myerscough College and NTAR (National Training Academy for Rail)
On successful completion you will be gaining a Level 3 Rail Engineering qualification in Traction and Rolling Stock.
Your first two years learning will be split between learning at Myerscough College in Preston (accommodation will be provided) where you start with a qualification at L2 & L3 Traction and Rolling Stock qualification and at your home Depot
Year 3 will be spent at your depot building your knowledge, gaining experience and in your final year you'll be putting the theory and knowledge you have learnt into practice. In this last year, you will be continuing learning at the depot and expanding knowledge with further modules:
Level 3 Rail Engineering (Competence)
Level 3 Rail Engineering (Technical Knowledge)
Training Outcome:
Starting as a Rail Engineering Technician Apprentice you will have the opportunity to follow a range of different career paths
Once qualified, you can apply to work within Northern, perhaps within the production teams employed as a Maintenance Engineer with potential to then move on to be a Team Leader or Technical Engineer. Alternatively, you could move around - from production to safety for example
Employer Description:At Northern, we play a vital role across the North by providing a reliable and friendly train service that helps thousands of people to go do their thing. That's over 2,000 services every day, travelling to over 500 destinations.
We're here to make a positive impact for the North and that means building a different kind of workplace. One that values individuality and celebrates differences. Somewhere we can work together, have fun, and do whatever it takes to make our customers’ lives easier. A place that encourages everyone to learn, grow and develop so we can all be our best every single day.Working Hours :At the start whilst learning at College it will be Mon- Fri (hours tbc) and at TrainCare Centre. Once competent you will be working shifts including weekends and evenings, details of which will be provided.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
You might be the type of person who:
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work
Likes working with tools, helping with DIY projects, or fixing things around the house
Enjoys building models, coding, or experimenting with technology
Loves getting stuck into real-world, practical challenges rather than just learning from books
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected
Travelling to different sites to keep our critical infrastructure in top condition
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 apprenticeship with Stoke College
You'll be required to attend the college on a block release, Monday lunchtime to Friday lunchtime
There will be approximately 10 blocks per year
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities
Alternatively, there are other roles with specialism in power, policy and support
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hours Monday - Friday. This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK. Working days TBCSkills: Problem solving skills,Team working,Willingness to learn,Practical....Read more...
CNC Programmer – Fanuc £35,000 Dudley, West Midlands Full-time
Are you a skilled CNC Programmer looking for a role that offers independence, responsibility, and the chance to play a pivotal role in the success of a growing business? This is your opportunity to take control of your work in a small, close-knit team, where your expertise will be valued, and you’ll have the autonomy to shape the future of our operations. As a key player in the business, you will become a central figure in driving innovation and efficiency.
What You’ll Be Doing:
Take charge of programming CNC machines to produce high-precision parts based on engineering drawings. Your programming expertise will be a core part of the manufacturing process and will directly influence the company’s success.
Enjoy the autonomy to set up, program, and operate CNC machines, including lathes, mills, and machining centres. Your decisions will be crucial in ensuring the efficiency and quality of our production.
You’ll have the freedom to optimize CNC programs and introduce new ideas for improving productivity and precision, playing a key role in driving continuous improvement across the business.
Take full responsibility for troubleshooting and maintaining CNC machines, ensuring smooth and uninterrupted production.
Ensure the highest standards of quality by independently conducting inspections and making sure all parts meet strict specifications.
While you’ll work with significant autonomy, you’ll be an integral part of a small, dynamic team, where your ideas will directly contribute to refining our manufacturing processes and achieving business goals.
What We’re Looking For:
You have proven experience programming CNC machines, ideally with Fanuc controls (though other systems are also welcome).
You’re comfortable working independently, solving problems on your own, and making decisions that will impact the company’s production and success.
You can easily interpret complex engineering drawings and blueprints to ensure the highest-quality parts are produced every time.
Your strong mechanical skills and problem-solving abilities will allow you to troubleshoot, maintain, and optimize CNC machines effectively.
Why This Opportunity is Perfect for You:
As a key member of a small team, your contributions will be integral to the company’s growth and success. You will have the autonomy and responsibility to make decisions that will help shape the future of the business.
Enjoy the benefits of working in a small, dynamic team where your voice is heard, and your ideas are valued. You’ll have a direct impact on the company’s operations and overall direction.
Take full ownership of your work, from programming and machine set-up to troubleshooting and quality control, with the freedom to make decisions that improve efficiency and precision.
In this small team, you’ll have the opportunity to take on more responsibility and have a significant influence on the company’s development and success.
....Read more...
You might be the type of person who
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work
Likes working with tools, helping with DIY projects, or fixing things around the house
Enjoys building models, coding, or experimenting with technology
Loves getting stuck into real-world, practical challenges rather than just learning from books
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected
Travelling to different sites to keep our critical infrastructure in top condition
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 Apprenticeship with Stoke College
You'll be required to attend the College on a block release, Monday lunchtime to Friday lunchtime
There will be approximately 10 blocks per year
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities
Alternatively, there are other roles with specialism in power, policy and support
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :Monday - Friday, shifts to be confirmed.
This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK.Skills: Problem solving skills,Team working,Willingness to learn,Practical....Read more...
The Company:
As the Engineering Manager you will be working for a very stable, cash rich organisation.
The company provide innovative hydraulic systems and solutions and have a very strong name in the market.
They are the sole UK distributor for leading hydraulic brands.
They are a well-known organisation within the Hydraulic industry and have some strong ties with leading manufacturers.
They work across the Mobile and Industrial markets and offer bespoke solutions.
Benefits of the Engineering Manager
£50k-£60k basic salary
£5k Bonus
Car or Car Allowance
Laptop
Mobile
Pension
Home setup
BUPA Healthcare
Life assurance
25 days holiday + bank holidays
The Role of the Engineering Manager
As the Engineering Manager you will manage all the projects.
You will be the engineering lead in the company so will get autonomy.
As the Engineering Manager you will be dealing with OEM’s mainly as well as some end users and distributors.
You will be dealing with companies in the Mobile, Off Highway, Agricultural Vehicle, Construction Vehicle, O&G, Automotive, Bus, MOD/Defence & General Engineering industries etc…
They offer full hydraulic systems solutions including Pumps, Valves, Power Packs, Cylinders and Control Systems etc...
You will need to work closely with the General Manager and will be the technical lead, this is a senior management role.
Key duties will be in the office though there will be trips to customers. You will get enquiries from the sales guys and will need to problem solve for complex hydraulic systems.
The role will involve a lot of trouble shooting and you will have 2 reports - 1 internal Sales Manager and 1 internal sales person.
Quote turnaround is 1 day or less. This is a re-active role as quotes and enquiries come from sales, then pass to internal sales to quote and then engineering for the technical side, this person will do more technical/solution based quotes.
You will be working with a range of high quality, high pressure hydraulics and offering single products as well as systems.
The Ideal Person for the Engineering Manager
Ideally you will have a degree in engineering, preferably Mechanical or General Engineering though time served and strong technical knowledge will be considered.
They would like someone with chartership or who would like to work towards that.
You MUST have a strong technical understanding of Hydraulics and/or Hydraulic Systems.
Some real world hands on engineering experience with strong hydraulic knowledge.
Experience with Hydraulic Pumps, Valves, Cylinders, Controls and Systems would be a massive benefit.
Great if you have experience as an Engineering Manager/Chief Engineer but also Systems Engineer/Lead Systems Engineer/ Hydraulic Systems Specialist/ Hydraulic Applications Engineer
Need to be a team player, able to work autonomously, relaxed but with a good tempo and hard working.
If you think the role of Engineering Manager is for you, apply now!
Consultant: Bjorn Johnson
Email: bjorn@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
We are excited to offer an exceptional opportunity to join our client’s team, a trusted and highly respected engineering consultancy delivering technical excellence across a range of sectors, including infrastructure engineering and planning, complimenting the Noise and Air Quality division. As an employee-owned company, you will play a key role in shaping their future, influencing decision-making, and sharing in their success. About the Role: We are seeking a Technical Sustainability & Energy Specialist to lead our client’s team. In this role, you will be expected to provide a technical leadership and management role while developing the team. Key Responsibilities:Develop and implement Sustainability & Energy strategies for various projects.Recruit, manage, and lead a growing team of consultants.Coordinate work allocation, workflow, and ensure consistent project completion.Maintain and improve client communication and service delivery.Provide expertise in areas including carbon management, net zero, energy strategy, and ESG.Influence and educate others on the importance of sustainability and energy strategies.Support the development of climate change resilience strategies at an asset level. Requirements:Degree (BSc/BEng) in Mechanical/Electrical Engineering, Environmental Science/Engineering, Climate Change, Architecture, or a related field. A relevant Masters (MSc/MEng) or postgraduate qualification is preferred.Certification in sustainability or energy management (e.g., CEM, ISO 50001, LEED AP, BREEAM, PAS 2080).Experience & Technical Skills:Minimum 10 + years in an engineering, energy, and carbon consultancy environment.Experience in energy performance certification projects (EPC, MEES, DEC, ESOS), building surveys, building simulation models using IES VE software and energy modelling (SAP, SBEM).Knowledge in dynamic simulation modelling for environmental assessments (TM54, TM52, passive design, LZC studies).Hands-on experience with delivering complex projects in the built environment, building services, and low/zero carbon energy strategies.Accredited CIBSE LCEA Level 5 assessor with 3-5 years of experienceUnderstanding of M&E systems within buildings and practical implementation of low energy and carbon design.8+ years of experience working with real estate investors, developers, and occupiers.Strong communication skills, ability to build relationships, and a commitment to professional development. About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organizations seeking to reduce their environmental footprint and those working towards decarbonizing the energy sector. Inclusive Application Process Climate17 is committed to fostering a diverse, inclusive, and equitable workplace. We believe that addressing climate change requires diverse perspectives and experiences. We welcome applications from all qualified candidates, regardless of ethnicity, race, gender, religious beliefs, sexual orientation, age, or disability status. If you need additional support, equipment, or resources to participate in the job application or interview process, please let us know. How to Apply Interested candidates should submit their resume and cover letter detailing their relevant experience and interest in the role. ....Read more...
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Maintenance Technician supports and ensures the completion of day-to-day maintenance activities at the plant. The position provides support to leadership for all maintenance staff to drive excellence and maximize effort. The position focuses on maintaining high-quality standards through the efforts expended at the facility that meet and exceed customer expectations while maintaining a professional and equally efficient environment for all production employees.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures. Inspect and repair plant equipment, including but not limited to mechanical, welding, carpentry, electrical, instrumentation and controls to minimize downtime. Document accurate maintenance activity records. Clean and maintain assigned areas and tools to ensure proper functionality. Participate in the continuous improvement process. Report incidents, near misses, and any non-conformances through the appropriate channels. Exemplify the expected values of organization including following policies and standard work procedures. Give input on and coordinate maintenance supply purchases. Perform Preventative Maintenance Program to ensure completion and accuracy. Other projects and tasks as assigned. Cross-train on other production functions to aid as business need dictates.
EDUCATION REQUIREMENT:
One-year certificate from college, technical school or manufacturing training program. One additional year of experience plus high school diploma/GED in lieu of higher education is acceptable. Two additional years of experience in lieu of formal education is acceptable.
EXPERIENCE REQUIREMENT:
No prior experience or training required unless noted above.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred Ability to troubleshoot electric, air systems, and hydraulic systems Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit Ability to work overtime as needed; ability to meet deadlines Ability to manage multiple priorities and respond urgently to down equipment Effective team player, self-motivated, quick learner Good communication skills with the ability to read, write, and communicate fluently in English
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online!....Read more...
Key activities of this role will include the following:
Pressure testing of ceramic barrels- understand expected pressure, record results
Tensile testing- crush testing and pull testing of ceramic barrels, fuse assemblies and general sub-assemblies
Thermal shock- heating of ceramic barrels and controlled placement into cold water and dye penetration testing to review microscopic cracks in ceramic
Set up, assembly and operation of electrical tests to validate the operation of a fuse. Each of the above tests require a formal report to be written in MS Word that can be circulated to internal and external stakeholders
Understand and utilise various pieces of electrical/ electronic equipment including volt meters, current meters, current sensors, thermocouples and electronic thermometers
Understanding technical standards
Reading and understanding technical drawings generated with AutoCAD
Cleaning, preventive maintenance and assistance with repair of all test equipment
Use of MS Excel to record data and control of documents such as calibration
Training:
This is a full-time role based in our Ponteland site
There will be a requirement to travel to TDR in Longbenton to study the BTec day release and practical training
This role reports to the R&D Manager and will work closely with R&D Engineers including Materials, Mechanical and Electrical Engineers
The role will be to assist the R&D team to implement product roadmap strategies and technical support for internal teams in UK and India
Training Outcome:
Upon successful completion of this Level 3 apprenticeship the candidate will be a time served test technician
Employer Description:Based in Ponteland, Lawson Fuses specialises in the design, development and manufacturing of low voltage, High-Rupturing Capacity (HRC) fuse links and fuse holders. Sold direct and via distributors, applications include electric /electronic capital equipment, utilities, renewable energy and domestic households.
Job Context:
Incorporated in 1938, LFL is an established British and global brand that operates in the fuse gear market with a focus on design, development and manufacture of low voltage High Rupture Capacity (HRC) fuse-links and associated fuse holders. LFL’s products are ASTA certified and comply with IEC/BS/ENA standards and accepted throughout the world. With manufacturing facilities based in UK and India, LFL’s global clientele is spread across several countries including (not limited to) UK, Middle East, Africa, India, Malaysia, Australia, South Korea and Hong Kong. With ISO 17025 ASTA certified R&D lab and ASTA certified manufacturing plants, LFL is keen on safety, quality and speed of product delivery. From 2018, LFL is part of Lucy Group which is a diversified international group head quartered in Oxford, UK and operates in multiple sectors including Power Distribution, Smart Lighting, Fuse Gear and Real Estate.
Lawson Fuses under the banner of Lucy Group is focusing on accelerated growth of its product line and subsequently the share of the market. The role of PDM will be directly influencing the vision of the business.Working Hours :Monday to Thursday
8:30am to 5pm
Friday
8:30am to 1:30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
The Company:
My client is a leading premium manufacturer of pumps and pump systems, serving the Building Services, Water Management, and Industry sectors. It has built a strong reputation for innovation, quality, and reliability.
Originally focused on selling heating pumps, the company has evolved into a comprehensive solutions provider, integrating smart technologies that connect people, products and services. With a commitment to continuous improvement, it aims to transition from a product-focused business to a trusted technology partner for its customers.
By aligning its strategies with market trends and customer needs, the company is enhancing business efficiency and effectiveness. A strong emphasis is placed on developing cutting-edge products and services while ensuring that resources are positioned closer to the customer front end.
Benefits of the Area Sales Manager
£55k - £60k
OTE 20% with enhanced targets 30%.
Car Hybrid
Pension
Holidays
Credit Card
The Role of the Area Sales Manager
We are looking to speak to a highly motivated Sales Account Manager to join their dynamic team, selling pumps to Consultants, Mechanical Contractors, and Distributors.
The role involves both account management and business development.
You will be responsible for managing existing relationships, identifying new opportunities, and promoting their high-quality pump products across key market segments.
Re-engage dormant accounts, treating them as new business opportunities to rekindle interest and drive sales forward.
Build and maintain strong relationships with clients, ensuring they are well-supported throughout the project lifecycle.
Break product specifications and introduce pumps to new clients within existing accounts, emphasizing performance and reliability.
Work closely with consultants and contractors on a project-to-project basis, providing expert advice and solutions for pump requirements
Target Area is: MK, OX, LU, HP, RG, SL, WD, EN, HA, UB, TW, W, NW, WC (London and surrounding areas)
The Ideal Person for the Area Sales Manager
Our client is looking for someone who is result driven, with a proven record, professional, vibrant, self-motivated and a desire to succeed.??
Hungry and driven individual with a strong desire to succeed and grow within a sales-driven environment.
Prior sales or account management experience, ideally in a project-based or technical sales environment (knowledge of pumps or similar products is a plus, but not essential).
Proven ability to open doors and develop relationships with key clients, especially consultants, contractors and distributors.
Strong understanding of project sales, with the ability to engage clients at different stages of the project lifecycle.
Excellent communication, negotiation, and relationship-building skills.
Ability to work independently, manage time effectively, and meet targets in a fast-paced environment.
Product knowledge can be taught—what’s essential is your drive, motivation and willingness to learn.
Full UK driving license and the ability to travel within the assigned region.
If you think the role of Area Sales Manager is for you, apply now!
Consultant: Sarah Dimmock
Email: Sarahd@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
You might be the type of person who
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart.
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work.
Likes working with tools, helping with DIY projects, or fixing things around the house.
Enjoys building models, coding, or experimenting with technology.
Loves getting stuck into real-world, practical challenges rather than just learning from books.
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems.
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply.
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected.
Travelling to different sites to keep our critical infrastructure in top condition.
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 apprenticeship with Stoke College.
You'll be required to attend the College on a block release, Monday lunchtime to Friday lunchtime.
There will be approximately 10 blocks per year.
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches.
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities.
Alternatively, there are other roles with specialism in power, policy and support.
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hrs, Monday - Friday.
This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK.Skills: Problem solving skills,Team working,Willingness to learn,Practical....Read more...
You might be the type of person who:
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work
Likes working with tools, helping with DIY projects, or fixing things around the house
Enjoys building models, coding, or experimenting with technology
Loves getting stuck into real-world, practical challenges rather than just learning from books
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected
Travelling to different sites to keep our critical infrastructure in top condition
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 apprenticeship with Stoke College
You'll be required to attend the college on a block release, Monday lunchtime to Friday lunchtime
There will be approximately 10 blocks per year
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities
Alternatively, there are other roles with specialism in power, policy and support
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hours Monday - Friday. This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK. Working days TBCSkills: Problem solving skills,Team working,Willingness to learn....Read more...
Your first two years will be spent between your TrainCare Centre and Myerscough College in Preston where accommodation is arranged and provided through Northern
Here you will work on your engineering skills in a classroom-based environment
You’ll be mentored and supported throughout the process. When you’re not at college, you’ll be at your respective TrainCare Centre, following a guided learning path with your Apprentice Trainer
The following year you will have a number of placements in different departments at your Home Depot and during this time you'll learn all about engineering and other key elements of the business
Your role will be to: fault find, fix and repair defects on trains whilst also routine maintenance on many of our trains which could be both electrical and mechanical
You will embed all the information you've learnt, whilst expanding your knowledge and skillset by learning extra modules in electrics, fault diagnoses and more
Training:Rail Engineering Technician Level 3 Apprenticeship Standard:
Your apprenticeship training will take place at Northern, Myerscough College and NTAR (National Training Academy for Rail)
On successful completion you will be gaining a Level 3 Rail Engineering qualification in Traction and Rolling Stock
Your first two years learning will be split between learning at Myerscough College in Preston (accommodation will be provided) where you start with a qualification at L2 & L3 Traction and Rolling Stock qualification and at your home Depot
Year 3 will be spent at your depot building your knowledge, gaining experience and in your final year you'll be putting the theory and knowledge you have learnt into practice
In this last year, you will be continuing learning at the depot and expanding knowledge with further modules:
Level 3 Rail Engineering (Competence)
Level 3 Rail Engineering (Technical Knowledge)
Training Outcome:
Starting as a Rail Engineering Technician Apprentice you will have the opportunity to follow a range of different career paths
Once qualified, you can apply to work within Northern, perhaps within the production teams employed as a Maintenance Engineer with potential to then move on to be a Team Leader or Technical Engineer
Alternatively, you could move around - from production to safety for example
Employer Description:At Northern, we play a vital role across the North by providing a reliable and friendly train service that helps thousands of people to go do their thing. That's over 2,000 services every day, travelling to over 500 destinations.
We're here to make a positive impact for the North and that means building a different kind of workplace. One that values individuality and celebrates differences. Somewhere we can work together, have fun, and do whatever it takes to make our customers’ lives easier. A place that encourages everyone to learn, grow and develop so we can all be our best every single day.Working Hours :At the start whilst learning at College it will be Mon- Fri (hours tbc) and at TrainCare Centre. Once competent you will be working shifts including weekends and evenings, details of which will be provided.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Order Management: Process and manage customer orders from receipt to dispatch, ensuring they are delivered on time, meet customer specifications, and stay within budget
Customer & Department Liaison: Liaise with customers and factory departments on approvals, manufacturing, delivery, site work, and inspections
Electrical Design Creation: Create electrical designs, wiring diagrams, and work instructions for manufacturing
Contract Documentation: Prepare and provide necessary contract documents, such as wiring diagrams, user manuals, export documents, and risk assessments
Contract Review: Regularly review contracts to ensure performance targets are met
Contract Reporting: Report contract performance updates to the Team Manager
Training:Electro- Mechanical Engineer Level 6 Apprenticeship Standard:
During your apprenticeship, you will receive two types of training.
On-the-job training will be delivered by Schneider Electric, your employer.
You’ll receive training and supervision to help you perform your role. This will include skills and knowledge that are outside of the apprenticeship but necessary for the job. In addition to ‘on-the-job’ training, they will support you in other ways to ensure your success.
Types of support will include:
A comprehensive induction
Mentoring or regular one-to-one guidance
Social enrichment and networking opportunities
Performance reviews
Mental health and wellbeing support
Feedback opportunities
Off-the-job training will be provided by a carefully selected training provider during your normal working hours. You will spend at least 20% of your working hours (approximately 6 hours per week) completing ‘off-the-job’ training.
This is protected time and a requirement for apprenticeship delivery. This training will teach you the knowledge, skills, and behaviours outlined in the apprenticeship standard, enabling you to achieve occupational competence.Training Outcome:
After successful completion of your apprenticeship, you will potentially have the opportunity to move into a permanent position
Your learning doesn't stop there! Learn everyday, to stop learning is to stop growing. We are genuinely curious, never done with learning with Schneider, there is no such thing as knowing it all or having all the answers. We beleive in life-long learning
Every minute of the day brings a new chance to listen, open up our minds, and widen our horizons. We are never too experienced to learn
Employer Description:Schneider’s purpose is to create impact by empowering everyone to make the most of their energy and resources, bridging progress with sustainability. At Schneider, we call this Life Is On.
Our mission is to be the trusted partner in sustainability and efficiency. As a global leader in industrial technology, Schneider provides integrated solutions that help businesses grow, using digital tools to improve efficiency and create value for our customers.
With over 150,000 employees and more than a million partners in over 100 countries, we stay close to our customers and communities. Schneider embraces diversity and inclusion, guided by our purpose of building a sustainable future for all.Working Hours :Monday to Friday, working hours TBCSkills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Analytical skills,Team working,Non judgemental....Read more...
You might be the type of person who
Enjoys taking things apart and putting them back together- whether it's a bike, a radio, or even a go-kart.
Has an interest in engineering, mechanics, or electronics and loves figuring out how systems work.
Likes working with tools, helping with DIY projects, or fixing things around the house.
Enjoys building models, coding, or experimenting with technology.
Loves getting stuck into real-world, practical challenges rather than just learning from books.
If any of this sounds like you, this could be the perfect role to turn your skills and interests into a career!
What you'll be doing:
Learning how to install, maintain and repair key power and cooling systems.
Working on low and high voltage systems, alarms, exchange generators, emergency lighting, cooling, and power back supply.
Supporting experienced engineers to keep BT's network up and running - ensuring the UK stays connected.
Travelling to different sites to keep our critical infrastructure in top condition.
Training:
As a Lead Engineering Maintenance Technician, you'll study for a Level 4 apprenticeship with Stoke College.
You'll be required to attend the College on a block release, Monday lunchtime to Friday lunchtime.
There will be approximately 10 blocks per year.
Training Outcome:
On completion of your apprenticeship, you will become a qualified maintenance field engineer, working alongside established colleagues in your respective geographic patches.
There are further opportunities to develop your knowledge and skills and over time progress to an Advanced Electrical Mechanical Engineer, working with other technologies such as refrigeration cooling, pressurisation and high voltage activities.
Alternatively, there are other roles with specialism in power, policy and support.
Employer Description:You’re not just looking for a career, you’re looking to make a difference.
Millions of people rely on us every day to help them live their lives, power their businesses, and keep their public services running. We connect friends to family, clients to colleagues, people to possibilities. We keep the wheels of business spinning, and the emergency services responding. And we use the power of technology to help solve big challenges, like climate change and cyber security.
From day one, you’ll have a voice at BT Group. You’ll get stuck in to tough challenges, pitching ideas and making things happen. You won’t be alone though: we’ll be there with help and support through you’re learning and development. You’ll make great friends, discover new talents, and feel part of something exhilarating.
This is your chance to make a real difference to the world. Grab it.Working Hours :37.5 hours, Monday - Friday.
This is not a desk job - you'll be out in the field, travelling in a company van (which we provide,) working with experienced engineers to maintain and test our power infrastructure across the UK.Skills: Problem solving skills,Team working,Practical,Willingness to learn....Read more...
Role Climate17 are working with a civil engineering and FM company who specialise in the oil, gas, and renewables industries. Within renewables, they offer a variety of services in civils, mechanical, electrical and project delivery. They are actively searching for a Contract Manager to oversee the management of contracts related to renewable energy projects, site maintenance, and construction projects. Responsibilities Lead EPC contract negotiations with subcontractors and select suppliers, ensuring favourable T&C for solar PV and Battery Storage projects. Oversee the execution and fulfilment of contractual obligations throughout the project lifecycle.Assist in identifying and selecting, contractors, subcontractors, and suppliers for solar PV and Battery Storage projects. Establish strong working relationships and hold contractors accountable for meeting project deliverables.Assist the team in ensuring projects are delivered on time, within budget, and in compliance with all regulatory and quality standards.Assist in developing and managing project budgets, tracking and controlling costs throughout the project lifecycle.Work with internal and external stakeholders in relation to lease, consents and insurances.zSet strict project timelines and milestones, monitoring progress and addressing any delays.Conduct commercial risk assessments for each project and develop mitigation strategies.Implement QC measures to guarantee that all installations and construction activities meet industry standards and company guidelines.Liaise and collaborate with internal teams, external stakeholders and clients to provide regular project updates, address concerns, and ensure smooth project execution.Assess and manage any variations required in the construction contracts after signature.Uphold health and safety standards on all projects, ensuring compliance with industry regulations and company policies. Requirements Solid experience as a Contracts Manager or Project Manager in the solar PV/renewable energy industry - desirableStrong understanding of EPC/ICP contracts, project management principles, and financial management. (JCT/NEC3 etc.)Excellent negotiation, communication, and interpersonal skills.Familiarity with UK renewable energy regulations and industry best practices.Solid analytical and problem-solving abilities.Health and safety certifications and experience (e.g., NEBOSH, CDM) - desirable.Comfortable working in a fast-paced environment, whilst maintaining accuracyGreat organisation skills with excellent attention to detail and ability to prioritise.Possess a full driving license. Location: Milford Haven, Pembrokeshire. – hybrid plus nation travel, as required. About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world. We welcome applications from all qualified candidates, regardless of their ethnicity, race, gender, religious beliefs, sexual orientation, age, or whether or not they have a disability. If you require additional support, equipment or resources in order to participate in the job application or interview process, please let us know.....Read more...
On a daily basis you’ll work within one of our service centres where you will learn to:
Service and repair a diverse fleet of specialist Powered Access machinery to meet company and manufacturer standards
Inspect and function test a wide range of equipment
Assess machines to ensure they meet the correct operational and safety guidelines
Diagnose and rectify complex electrical, mechanical and hydraulic faults
Order replacement parts and fit them correctly
Maintain accurate and comprehensive service and maintenance records
Develop in-depth product knowledge
Build excellent working relationships with customers and understand their business needs and requirements
Become an ambassador for our “Customer First” culture, resolving any issues quickly and keeping your colleagues and customers informed, so they feel truly valued
Expand your team working skills with your colleagues and the wider Sunbelt Rentals team
Manage multiple tasks and deadlines as part of a varied workday in a fast-paced operational environment
Training:You will be completing a level 3 Lift Truck and Powered Access Technician Apprenticeship Standard. This will be delivered using a combination of:
Workplace experience to gain practical skills
Guidance and training from an experienced workplace mentor
Industry recognised training leading to an apprenticeship qualification. You will attend residential placements at a training centre and may be required to travel outside of your normal working hours
Training Outcome:Following successful completion of your apprenticeship you will be offered a permanent role, with one of the best rental equipment providers in the industry.
The size and scope of Sunbelt Rentals affords a wealth of opportunity for future progression. We are increasingly investing in developing the skills of our apprentices, with additional wide-ranging training opportunities built into the programme, and the development of possible higher-level qualifications and career pathways post-graduation.Employer Description:Sunbelt Rentals is the leader in equipment rentals in the UK, Ireland, US and Canada - as well as specialist operations in Europe. We provide a range of solutions to every market and sector, including construction, industrial, energy, infrastructure, government and events. Our teams make the impossible possible and the unthinkable doable. Turning what if into what is. Our people are at the heart of our values and they’re our greatest asset. We rely on you to look after our customers so in return, we take good care of you. We recognise the value and uniqueness of our team-mates and are committed to creating a diverse and inclusive Sunbelt Rentals, providing equality of opportunity and a culture of fairness and respect. Your health, safety and wellbeing is really important to us. We’re raising awareness and providing support through initiatives such as our mental health awareness campaign and first-aider programme. You’ll also be able to access a 24-7 employee assistance helpline, counselling services and financial wellbeing support.Working Hours :40 Hours per week, in agreement with the manager but Monday - Friday between the hours of 7.00am - 5.00pm e.g., 8.00am - 4.30pm. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative,Enthusiasm,Motivation to learn new skills....Read more...
