Test Development Engineer
Location: Colchester, Essex (Hybrid – 3 Days Onsite / 2 Days Remote)
An opportunity has arisen for a Test Development Engineer to join a leading designer and manufacturer of high-performance embedded computing solutions serving aerospace, defence, telecommunications, industrial, transportation and other mission-critical markets.
The organisation develops advanced embedded computing platforms, single board computers, networking products and high-reliability electronic systems used in some of the world's most demanding applications. With continued investment in product innovation and manufacturing capability, the business is experiencing significant growth and expanding its engineering team to support an increasing pipeline of new product introductions.
This is a technically challenging engineering role focused on developing and supporting Automated Test Equipment (ATE) solutions that enable the efficient manufacture of complex embedded computing hardware. Working closely with hardware, software, manufacturing and verification teams, you will influence product testability from the earliest stages of development through to full-scale production.
This role would suit an engineer with experience designing Automated Test Equipment (ATE), developing manufacturing test solutions or supporting production test systems who enjoys solving complex technical challenges within a collaborative engineering environment.
Main Responsibilities of the Test Development Engineer (Colchester):
Define Design for Testability (DfT) requirements during new product development and PCB design reviews
Develop and maintain Automated Test Equipment (ATE) requirements for new embedded hardware platforms
Design and specify ATE hardware including fixtures, interface test adapters (ITAs), harnesses, switching systems and interface electronics
Work closely with software engineers to develop automated production test sequences and diagnostic routines
Support New Product Introduction (NPI), pilot builds and transition into volume manufacturing
Validate and qualify production test systems prior to manufacturing release
Troubleshoot production test failures and carry out root cause investigations
Drive improvements in manufacturing yield, throughput and overall test efficiency
Produce and maintain technical documentation including test procedures, schematics, maintenance guides and interface documentation
Support ongoing maintenance, calibration and continuous improvement of deployed ATE systems
Collaborate with hardware, firmware, software, manufacturing and quality teams to optimise product test strategies
Support production growth through scalable, high-performance automated test solutions
Requirements of the Test Development Engineer (Colchester):
Proven experience developing or supporting Automated Test Equipment (ATE) within an electronics manufacturing environment
Strong understanding of electronic hardware including analogue and digital circuits, power systems and high-speed interfaces
Experience designing production test systems for complex electronic assemblies or embedded computing products
Knowledge of Design for Testability (DfT), Built-In Self-Test (BIST) and diagnostic methodologies
Experience working with oscilloscopes, programmable power supplies, switching hardware and electronic test instrumentation
Strong fault-finding and root cause analysis skills
Experience working closely with software engineers to develop integrated hardware and software test solutions
Excellent technical documentation and requirements capture skills
Ability to work collaboratively across multidisciplinary engineering teams
Experience within one or more of the following technologies would be advantageous:
Embedded computing systems
Single Board Computers (SBCs)
VPX, VME or CompactPCI architectures
Automated Test Equipment (ATE)
PCB and multilayer board design
Manufacturing and production test systems
Functional test and environmental testing
High-reliability electronics
Defence electronics
Aerospace electronics
Industrial computing platforms
Desirable:
Experience within aerospace, defence, telecommunications or industrial electronics sectors
Knowledge of SMT manufacturing, PCB assembly and functional test processes
Experience improving manufacturing yield and production throughput
Ability to design custom electronics for test fixtures and adapters
Experience supporting qualification and environmental testing programmes
Understanding of manufacturing process optimisation and production scalability
Working Pattern & Benefits:
Hybrid working — 3 days onsite in Colchester and 2 days remote
Opportunity to work on technically advanced embedded computing platforms used in mission-critical applications
Join a rapidly growing engineering organisation with significant investment in new product development
Work across the full product lifecycle from concept through to production
Annual company profit share bonus
Private healthcare
Company pension with up to 10% employer contribution
25 days annual leave plus bank holidays and holiday purchase scheme
Life assurance and income protection
Enhanced parental leave
Cycle to Work and salary sacrifice schemes
Employee Assistance Programme and virtual GP
Excellent long-term technical and career development opportunities
To apply for this Test Development Engineer role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com....Read more...
An excellent opportunity has arisen for a Senior Quality Engineer, based in Bedford, Bedfordshire, to work for a leading Electronics Manufacturing provider supplying to a range of mission critical environments such as the aerospace and motorsport sectors.
The Senior Quality Engineer, Bedford, Bedfordshire, will be responsible for providing expert support through quality processes to meet the highest customer standards with the Aerospace sector. You will ensure that compliance with both customer and quality management system standards is upheld.
The ideal candidate for the Senior Quality Engineer, Bedford, Bedfordshire will have;
Previous experience working in a relatable manufacturing environment, ideally with Electronic Manufacturing
Experience with Aerospace AS9100 Quality Management Systems
Knowledge of IPC Standards
The Senior Quality Engineer, Bedford, Bedfordshire, will have;
Proven experience in quality engineering, quality assurance, or customer quality management.
Strong understanding of quality management systems.
Experience with Quality audits.
This is a fantastic time to join a highly successful, industry leader in their field that offers an abundance of development and career progression.
APPLY NOW for the Senior Quality Engineer, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref. THD1409. Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 848.....Read more...
Up to £45,000 Hours: 7:30am – 4:30pm Monday to Thursday / 2:00pm Friday, Holiday: 28 days, Permanent Position. Location Manchester
We are looking for an experienced Design Engineer to work on the design and development of bespoke police, emergency service and specialist vehicle conversions.
This is a varied role taking projects from initial concept through detailed design, prototype build and into production.
The company are a leading player in their market and due to company expansion, they are seeking a design engineer to join the team.
Key Responsibilities for the Design Engineer role:
Design bespoke vehicle conversion solutions for police and emergency service vehicles.
Produce detailed 2D and 3D CAD models and manufacturing drawings.
Design brackets, mounting systems, equipment installations and vehicle modifications.
Support electrical and electronic equipment integration.
Produce BOMs, technical specifications and engineering documentation.
Ensure designs meet customer requirements and relevant safety standards.
Work closely with production, procurement and installation teams.
Support prototype builds, testing and product validation.
Resolve manufacturing issues.
Manage engineering changes and drawing revisions.
We would welcome people to apply that have:
Previous experience as a Design Engineer within automotive, vehicle conversion, specialist vehicles or manufacturing.
Strong CAD experience using SolidWorks, Autodesk Inventor, CATIA or similar.
Experience producing manufacturing drawings and documentation.
Understanding of mechanical design, fabrication and manufacturing processes.
Knowledge of automotive electrical systems would be advantageous.
HNC, HND, Degree or equivalent engineering experience.
Experience within vehicle conversions or modifications would....Read more...
We are partnered with a global engineering business in Chelmsford, Essex, developing advanced electronic systems used across aerospace, medical, and industrial applications. As production demand continues to grow, they are looking for a Production Engineer to support manufacturing, improve processes, and help transition new designs into stable, repeatable production.
In this Production Engineer role, you will:
Support manufacturing and test activities, resolving technical issues on the line
Carry out fault finding and root cause analysis to improve product performance
Drive practical improvements to processes, cost, and manufacturability
Support new product introduction, making sure designs are ready for efficient, scalable build
The ideal Production Engineer will have:
Experience supporting manufacturing in an electromechanical or electronics environment
A hands-on approach to problem solving, with strong fault-finding skills
Understanding of manufacturing processes and design for manufacture principles
An engineering degree or equivalent industry experience
This is a strong opportunity to join a well-established engineering team based in Chelmsford, Essex, working on complex, high-reliability products, with the chance to influence how they are built and improved over time.
To apply for this Production Engineer role in Chelmsford, Essex, apply now! For more information, email Ricky at rwilcocks@redlinegroup.Com or call on 01582 878810.....Read more...
Are you an Electrical Design Engineer looking for your next challenge? Whether you're a junior engineer looking to develop your skills or a mid-level engineer ready to take on greater responsibility, my client has an excellent opportunity to join their growing R&D team.
This is a hands-on role where you will be involved in the design and development of electrical systems for highly specialised machinery, working alongside multidisciplinary engineering teams from concept through to manufacture.
In this Electrical Design Engineer – SolidWorks role based in Abingdon, Oxfordshire, you will be responsible for the following:
Designing electrical systems and producing detailed electrical drawings and schematics using SolidWorks Electrical.
Creating and maintaining electrical documentation, including wiring diagrams, bills of materials and cable schedules.
Supporting the development of special purpose machinery by working closely with mechanical, software and manufacturing engineers.
Assisting with prototype builds, testing and commissioning activities to ensure designs meet performance and quality requirements.
The successful applicant for this Electrical Design Engineer – SolidWorks job based in Abingdon, Oxfordshire should have:
Experience using SolidWorks Electrical (or SolidWorks with electrical design exposure) to produce electrical schematics and documentation.
A good understanding of electrical design principles, control panels, wiring diagrams and industrial electrical systems.
Experience working within a manufacturing, automation, machinery or special purpose equipment environment would be advantageous
A degree, HNC/HND or equivalent qualification in Electrical Engineering, Electronic Engineering or a related discipline.
To apply for this Electrical Design Engineer – SolidWorks job based in Abingdon, Oxfordshire please send your CV to NDrain@redlinegroup.Com or call Nick on 01582 878828 for more information....Read more...
A Quality Engineer is urgently required for a new job in Fareham, for a global manufacturing leader.
An exciting new job has arisen for a Quality Engineer, based in Fareham to work for an industry leading design and manufacturer of sensors used in the Gas detection.
The Quality Engineer, located in Fareham will be responsible for the development of internal quality processes and driving improvement within the production environment.
In this Quality Engineer role, you will:
Support manufacturing and test activities, resolving technical issues on the line
Carry out fault finding and root cause analysis to improve product performance
The ideal Quality Engineer, based in Fareham will have experience in;
Conduct both internal and external audits to ISO9001 standards
Have a good understanding of Quality Management systems ISO9001, 14001 and 18001
Have experience/understanding of quality tools such as 8D, 5S and Fishbone
APPLY NOW! For the Quality Engineer job, located West Sussex by sending a cover letter and CV to rwilcocks@redlinegroup.Com or call 01582 87 8810
....Read more...
An established space and aerospace engineering organisation is looking for a Mechanical Engineer to support the design and development of complex, precision-engineered products.
Youll take mechanical designs from concept through to manufacturing, working across product development, test equipment, tooling and associated assemblies.
This is a 6-12 month inside IR35 contract with strong likelihood of extension.
Key Responsibilities for the Mechanical Engineer
- Develop mechanical designs and manufacturing drawings using Creo.
- Support SRR, PDR, CDR and other design reviews.
- Produce design reports, test plans and technical documentation.
- Work with manufacturing and process engineers to deliver practical solutions.
- Resolve complex design challenges and support FEA, thermal and stress analysis.
- Consider DFM, DFA, materials, cost and lead times throughout development.
About You
- Mechanical Engineering degree or equivalent.
- Experience in space, aerospace or similarly complex engineering.
- Strong Creo/CAD experience.
- Experience with structured design reviews and product development.
- Knowledge of materials, manufacturing and mechanical systems.
- FEA/thermal/stress analysis experience desirable.
- ECSS, MIL-STD, Windchill or requirements management experience advantageous.
TT....Read more...
Multi Skilled Engineer - Electical Bias Industry: Fast-Moving Consumer Goods (FMCG manufacturing) Location: Tiverton area (Devon) Shift Pattern: 2-2-3 (2 days, 2 off, 3 nights) Salary: Up to £52–53k depending on experienceThis role involves maintenance, fault finding, and continuous improvement in a production environment.Key Requirements
Experience in FMCG or high-speed production environmentsRecognised engineering qualification (e.g., NVQ, HNC/HND)Electrical competence, including BS 7671 18th EditionStrong fault finding and problem-solving skillsAbility to work independently and prioritise tasksBasic computer literacy (for maintenance systems / reporting)
Pay & Benefits
Salary: up to ~£52–53kOvertime: 1.5× rateShift pattern: every other weekend offTraining and development offeredLow staff turnover
Your experience might match if you’ve worked as:
Maintenance EngineerShift EngineerManufacturing EngineerProduction EngineerEngineering CraftspersonMulti Skilled Engineer....Read more...
Multiskilled Maintenance Engineer
A global chemical manufacturer at the forefront of sustainability, clean energy transition and circular economy innovation is looking to appoint a Multiskilled Maintenance Engineer to join its engineering and operations team in Warrington.
Salary and Benefits
Annual Salary Between £58,000 - £63,000 (DOE)
Competitive Company Pension Scheme
Private Medical Insurance
Healthcare Cashback Plan
25 Holidays + 8 Bank Holidays
Life Assurance Policy
Shift Pattern
37.5 Hour Working Week
Monday – Friday, 8am – 4pm
Call-Out Rota
The Role of Multiskilled Maintenance Engineer
Reporting to the Maintenance Manager, the successful Multiskilled Maintenance Engineer will play a key role in maintaining plant equipment, infrastructure and site reliability through planned, preventative and reactive maintenance activities across both Mechanical and EC&I disciplines.
This is an excellent opportunity for a time-served, Multiskilled Engineer looking to join a forward-thinking manufacturing business focused on operational excellence, continuous improvement and sustainable technologies.
Key Responsibilities of the Multiskilled Maintenance Engineer:
Deliver planned and reactive maintenance across mechanical, electrical, control and instrumentation systems
Fault find and diagnose issues across complex process plant equipment
Support plant reliability, minimise downtime and maximise operational availability
Carry out maintenance activities in line with SAP PM schedules
Support commissioning, plant modifications and improvement projects
Maintain compliance with HSE procedures, permits and isolation standards
Work closely with production teams, engineering colleagues and contractors
Update maintenance records and work orders within SAP CMMS systems
Participate in the site on-call engineering rota
The Ideal Candidate Will Have:
Recognised engineering apprenticeship or equivalent qualifications (e.g. HNC/HND in their engineering discipline)
Multi-skilled engineering experience across Mechanical and EC&I disciplines
Experience within chemical, manufacturing or process industries
Strong knowledge of pumps, motors, drives, instrumentation and control systems
Ability to read and interpret mechanical, electrical and control drawings
Experience using SAP PM or similar maintenance management systems
Excellent fault-finding, problem-solving and organisational skills
Why Apply for the Multiskilled Maintenance Engineer role?
This opportunity offers the chance to join a globally recognised manufacturer investing heavily in sustainable technologies, operational improvement and future-focused innovation, while working within a collaborative and safety-driven engineering environment.
How to Apply?
To apply for the position of Multiskilled Maintenance Engineer, please submit a copy of your CV for review.
....Read more...
Field Service Engineer Peterborough £34,000 - £36,000 Basic + Overtime (OTE £45,000+) + Company Van + Pension + Healthcare + Immediate Start
Are you a Field Service Engineer looking to develop your skills through structured training and clear progression? Are you keen to build a long-term career within a business that actively invests in its engineers? This is an excellent opportunity to join a global leader in conveyors and automation, offering industry-leading training, variety, and genuine career development.
This role is ideal for a Field Service Engineer who wants to learn, progress, and grow within a supportive service team. You’ll receive comprehensive training on advanced material handling systems while working with high-profile clients across logistics, e-commerce, retail, and manufacturing in the UK and abroad.
Your Job As A Field Service Engineer Will Include:
* Installing, servicing, and maintaining conveyor and material handling systems * Carrying out preventive maintenance and reactive breakdown repairs * Shadowing senior engineers during training and gradually taking ownership of jobs * Attending structured technical training courses and manufacturer-led programmes * Producing service reports and working to strict health & safety standards * Supporting and supervising installation projects as experience grows
As A Field Service Engineer You Will Have:
* NVQ, apprenticeship, or time-served background in ANY electrical or mechanical engineering * A hands-on maintenance or service background (training provided on specific systems) * A strong willingness to learn and progress technically and professionally * Good communication skills and confidence working with customers * A flexible approach to UK and occasional overseas travel * A full UK driving licenceKeywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Conveyor Systems, Material Handling, Automation, Mechanical Engineering, Electrical Engineering, Birmingham, Engineering Services....Read more...
Senior Laser Systems Engineer
Are you a Senior Laser Systems Engineer looking for your next challenge? My client has an exciting opportunity for an experienced engineer to join their growing team, working on the design, development and support of advanced laser systems for highly specialised industrial applications.
This is a hands-on role where you will be involved in the development of bespoke laser systems, supporting projects from concept through to manufacture, installation and commissioning whilst working alongside multidisciplinary engineering teams.
In this Senior Laser Systems Engineer role based in Abingdon, Oxfordshire, you will be responsible for the following:
Development of bespoke laser systems, including component selection, system layouts and detailed engineering drawings.
Managing the design process, ensuring projects are delivered to specification, on time and within budget.
Supporting the build, testing, installation and commissioning of laser systems, providing technical expertise throughout the project lifecycle.
Carrying out servicing, fault finding and technical support activities to ensure systems continue to operate at optimum performance.
The successful applicant for this Senior Laser Systems Engineer job based in Abingdon, Oxfordshire should have:
Experience designing and developing complex laser & optical based systems within a manufacturing or engineering environment.
A strong understanding of design, system integration and engineering documentation, with experience producing technical drawings.
Experience with installation, servicing, fault finding or commissioning of complex laser engineering equipment would be advantageous.
A Bachelor's, Master's or PhD in Optical Engineering, Photonics, Physics, Laser Engineering or a related engineering or scientific discipline.
To apply for this Senior Laser Systems Engineer job based in Abingdon, Oxfordshire please send your CV to NDrain@redlinegroup.Com or call Nick on 01582 878828 for more information.
....Read more...
Electrical Maintenance Engineer – Electrical Bias
Location: HullSalary: £47,916.56 per annumContract: Permanent, full-timeShift pattern: 4 on, 4 off – 4 days, 4 off, 4 nights, 4 offThe Opportunity
Aqumen Recruitment is working on behalf of a well-established global manufacturer to recruit an experiencede Electrical Maintenance Engineer for its Hull site.You will provide planned and reactive maintenance across automated production equipment, helping to reduce downtime, improve reliability and maintain safe, efficient operations.This role suits a qualified engineer with strong electrical fault-finding skills who is looking for stability, technical variety and further development.Key Responsibilities
Complete planned preventative maintenance on production machinery.Respond quickly to electrical and mechanical breakdowns.Diagnose faults and carry out effective repairs.Work with PLC-controlled equipment, drives, inverters, motors and sensors.Improve machine availability and overall equipment performance.Record maintenance activity using CMMS and TPM systems.Identify recurring faults and recommend improvements.Support engineering projects and continuous improvement activity.Work closely with production, quality and operational teams.Contribute to risk assessments and safety documentation.Ensure all work meets health, safety and environmental standards.Support and share knowledge with colleagues.
Essential Requirements
NVQ Level 3, City & Guilds or equivalent engineering qualification.Maintenance experience within manufacturing, production or processing.Strong electrical fault-finding and diagnostic skills.Experience with drives, inverters, motors, sensors and control systems.Experience fault-finding on PLC-controlled machinery.Ability to read and amend engineering drawings.Proactive approach to maintenance and reliability.Strong communication and teamwork skills.Flexibility to work the advertised shift pattern.
Desirable Experience
Automated or high-volume manufacturing.Plastics, packaging, FMCG or process environments.CMMS and TPM systems.Lean manufacturing or continuous improvement.Pneumatic and hydraulic systems.Root-cause analysis and improvement projects.
Benefits
£47,916.56 annual salaryPermanent employmentPredictable 4-on, 4-off shift patternCompany pensionLife insuranceFree onsite parkingCycle to Work schemeWellness programmeTechnical training and developmentOpportunities to support engineering improvements
Apply Today
Applications are welcomed from multi-skilled engineers, electrical maintenance engineers and electrically biased manufacturing engineers with strong industrial fault-finding experience.Please apply with an up-to-date CV outlining your qualifications, manufacturing background and experience with machinery and control systems.Aqumen Recruitment is acting as an Employment Agency in relation to this permanent vacancy.....Read more...
Multi-Skilled Maintenance Engineer – Electrical Bias
Location: HullSalary: £47,916.56 per annumContract: Permanent, full-timeShift pattern: 4 on, 4 off – 4 days, 4 off, 4 nights, 4 offThe Opportunity
Aqumen Recruitment is working on behalf of a well-established global manufacturer to recruit an experienced Multi-Skilled Maintenance Engineer for its Hull site.You will provide planned and reactive maintenance across automated production equipment, helping to reduce downtime, improve reliability and maintain safe, efficient operations.This role suits a qualified engineer with strong electrical fault-finding skills who is looking for stability, technical variety and further development.Key Responsibilities
Complete planned preventative maintenance on production machinery.Respond quickly to electrical and mechanical breakdowns.Diagnose faults and carry out effective repairs.Work with PLC-controlled equipment, drives, inverters, motors and sensors.Improve machine availability and overall equipment performance.Record maintenance activity using CMMS and TPM systems.Identify recurring faults and recommend improvements.Support engineering projects and continuous improvement activity.Work closely with production, quality and operational teams.Contribute to risk assessments and safety documentation.Ensure all work meets health, safety and environmental standards.Support and share knowledge with colleagues.
Essential Requirements
NVQ Level 3, City & Guilds or equivalent engineering qualification.Maintenance experience within manufacturing, production or processing.Strong electrical fault-finding and diagnostic skills.Experience with drives, inverters, motors, sensors and control systems.Experience fault-finding on PLC-controlled machinery.Ability to read and amend engineering drawings.Proactive approach to maintenance and reliability.Strong communication and teamwork skills.Flexibility to work the advertised shift pattern.
Desirable Experience
Automated or high-volume manufacturing.Plastics, packaging, FMCG or process environments.CMMS and TPM systems.Lean manufacturing or continuous improvement.Pneumatic and hydraulic systems.Root-cause analysis and improvement projects.
Benefits
£47,916.56 annual salaryPermanent employmentPredictable 4-on, 4-off shift patternCompany pensionLife insuranceFree onsite parkingCycle to Work schemeWellness programmeTechnical training and developmentOpportunities to support engineering improvements
Apply Today
Applications are welcomed from multi-skilled engineers, electrical maintenance engineers and electrically biased manufacturing engineers with strong industrial fault-finding experience.Please apply with an up-to-date CV outlining your qualifications, manufacturing background and experience with machinery and control systems.Aqumen Recruitment is acting as an Employment Agency in relation to this permanent vacancy.....Read more...
Service Engineer (Industrial Refrigeration)Doncaster / EnglandStep into a hands-on Service Engineer role with a sustainability-led industrial refrigeration specialist, working across the UK with the backing of three decades of European engineering heritage.A well established European manufacturer of advanced industrial refrigeration systems is expanding its UK service operation and looking for an experienced Service Engineer to join the team. With more than thirty years of design and manufacturing expertise behind it, the business has built its reputation on natural refrigerant technology, supporting clients across food production, logistics and process industries as they move towards lower-carbon, more energy-efficient operations. Every system installed is paired with a 24/7 remote monitoring platform that tracks performance live and flags issues before they affect the customer.This is a full-time, on site Service Engineer position based in England, with the Doncaster area being the ideal home base given the geographic spread of clients. You will be the face of the business in the field - diagnosing faults, carrying out planned maintenance, completing repairs and keeping mission-critical refrigeration plant running at peak performance.The roleReporting into the UK service operation, the Service Engineer will own the day-to-day technical wellbeing of installed systems across customer sites. Expect a varied schedule of reactive callouts, scheduled servicing and commissioning support, with full back-up from the European engineering team and access to live data through the remote monitoring platform.Here's what you'll be doingDiagnosing and resolving technical faults across industrial refrigeration systems, including ammonia plantCarrying out planned preventative maintenance to keep units running efficiently and safelyAttending breakdown callouts and completing on-site repairs to a high standardSupporting installations, commissioning and performance testing of new equipmentWorking alongside the remote monitoring team to interpret data and act on alertsCommunicating clearly with clients on-site, explaining work carried out and any follow-up requiredMaintaining accurate service records, job sheets and compliance documentationHere are the skills you'll needMinimum three years' experience in industrial machinery manufacturing or industrial refrigeration serviceHands-on experience with ammonia refrigeration systemsAmmonia handling certificate is essential - this is a non-negotiable requirementStrong fault-finding and troubleshooting ability across mechanical, electrical and control systemsConfidence working independently, managing your own diary and prioritising calloutsClear communication skills for client-facing technical conversationsA full, valid UK driving licenceRelevant technical qualifications or industry certifications would be advantageousWork permissionsYou must have the right to work in the United Kingdom. Visa sponsorship is not available for this Service Engineer position.Key perks and benefitsCompetitive salary reflecting experience and certifications heldCompany vehicle for service work across the UKThe chance to work with cutting-edge natural refrigerant technology backed by an established European manufacturerOngoing technical training and exposure to advanced refrigeration platformsDirect collaboration with the engineering team based in mainland EuropeGenuine progression potential as the UK operation continues to growWhy a career in industrial refrigeration mattersIndustrial refrigeration sits at the heart of the UK's food supply, logistics and process manufacturing sectors, and the shift towards natural refrigerants is reshaping the industry as carbon reduction targets bite. Engineers with ammonia experience are in increasingly short supply, which makes this Service Engineer role a strong long-term move both financially and in terms of relevance. Joining a manufacturer rather than a third-party contractor gives you deeper product knowledge, factory-level technical support and a clearer route into senior service, commissioning or technical leadership positions over time.This Service Engineer opportunity in the Doncaster area is brought to you by The Opportunity Hub UK - connecting skilled engineering professionals with employers shaping the future of sustainable industry.....Read more...
Electrical Maintenance EngineerNewbury, Berkshire £54,000 12-hour Panama shifts 15% pension contributionThe Opportunity We are recruiting for an experienced Electrical Maintenance Engineer to join a leading UK manufacturer within a heavy industrial manufacturing environment. This role offers long-term stability, strong investment in engineering, and the opportunity to work within a well-established, high-performing team. This is an excellent opportunity for an Electrical Maintenance Engineer seeking job security, strong earning potential, and clear career progression.The Role As an Electrical Maintenance Engineer, you will be responsible for maintaining and improving production equipment within an industrial environment. The role combines both planned (PPM) and reactive maintenance, ensuring minimal downtime and optimal site performance. You will work across a wide range of plant machinery and play a key role in driving reliability and continuous improvement across the site.Key Responsibilities of an Electrical Maintenance Engineer - Carry out planned (PPM) and reactive electrical maintenance - Fault-find on motors, sensors, control panels, wiring, and drives - Read and interpret electrical drawings and schematics - Maintain and improve equipment reliability across site - Work on conveyors, hydraulic and pneumatic systems - Support installations and continuous improvement projectsRequirements of an Electrical Maintenance Engineer - NVQ / City & Guilds Level 3 in Electrical Engineering (or equivalent) - Experience within manufacturing or heavy industrial environments - Strong electrical fault-finding ability - Knowledge of motors, sensors, control panels, and industrial wiring - Comfortable working in a heavy industrial environment - Able to work Panama shift pattern (days & nights)Desirable Skills - PLC knowledge (Siemens preferred) - Experience with AC/DC drives - Exposure to automation and control systemsWhat’s On Offer - Salary £54,000 - 27 days holiday + bank holidays - 15% pension contribution - Life assurance - Premium overtime rates - Employee Assistance Programme - Ongoing internal and external trainingApply Now If you’re an Electrical Maintenance Engineer looking for a long-term opportunity with a strong employer and excellent benefits, apply now or get in touch to find out more.....Read more...
We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI).
Key Responsibilities
Develop, implement, and optimise production processes, work instructions, and test procedures.
Support NPI, running pilot builds, and transitioning products to full-scale manufacturing.
Maintain and troubleshoot production equipment, tooling, and fixtures.
Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions.
Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies.
Provide day-to-day support and training to production staff.
Requirements
Two or more years of experience in production engineering, process engineering, or manufacturing support.
Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring).
Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems.
Strong analytical, problem-solving, and communication skills.
Experience in high-mix or low-volume manufacturing environments.....Read more...
We are looking for an Electromechanical Production Engineer to optimise and support manufacturing processes, ensuring efficient production, product quality, and continuous improvement within an electromechanical production environment. This role acts as the key link between Design and Manufacturing, particularly for New Product Introduction (NPI).
Key Responsibilities
Develop, implement, and optimise production processes, work instructions, and test procedures.
Support NPI, running pilot builds, and transitioning products to full-scale manufacturing.
Maintain and troubleshoot production equipment, tooling, and fixtures.
Work with Quality Engineering to define inspection methods, investigate defects, and implement corrective actions.
Lead continuous improvement initiatives using Lean, Six Sigma, and Kaizen methodologies.
Provide day-to-day support and training to production staff.
Requirements
Two or more years of experience in production engineering, process engineering, or manufacturing support.
Experience with electromechanical assemblies (motors, sensors, PCBs, actuators, wiring).
Familiarity with Lean manufacturing, quality tools (FMEA, SPC, 8D), and ERP and MRP systems.
Strong analytical, problem-solving, and communication skills.
Experience in high-mix or low-volume manufacturing environments.....Read more...
Field Service EngineerCoventry £34,000 - £36,000 Basic + Overtime (OTE £45,000+) + Company Van + Pension + Healthcare + Immediate Start
Are you a Field Service Engineer looking to develop your skills through structured training and clear progression? Are you keen to build a long-term career within a business that actively invests in its engineers? This is an excellent opportunity to join a global leader in conveyors and automation, offering industry-leading training, variety, and genuine career development.
This role is ideal for a Field Service Engineer who wants to learn, progress, and grow within a supportive service team. You’ll receive comprehensive training on advanced material handling systems while working with high-profile clients across logistics, e-commerce, retail, and manufacturing in the UK and abroad.Your Job As A Field Service Engineer Will Include:
* Installing, servicing, and maintaining conveyor and material handling systems * Carrying out preventive maintenance and reactive breakdown repairs * Shadowing senior engineers during training and gradually taking ownership of jobs * Attending structured technical training courses and manufacturer-led programmes * Producing service reports and working to strict health & safety standards * Supporting and supervising installation projects as experience grows
As A Field Service Engineer You Will Have:
* NVQ, apprenticeship, or time-served background in ANY electrical or mechanical engineering * A hands-on maintenance or service background (training provided on specific systems) * A strong willingness to learn and progress technically and professionally * Good communication skills and confidence working with customers * A flexible approach to UK and occasional overseas travel * A full UK driving licenceKeywords: Field Service Engineer, Service Engineer, Maintenance Engineer, Conveyor Systems, Material Handling, Automation, Mechanical Engineering, Electrical Engineering, Birmingham, Engineering Services....Read more...
An excellent opportunity has arisen for a Quality Engineer, based in Bedford, Bedfordshire, to work for a leading Manufacturer of electro-mechanical systems to a range of mission critical environments such as the defence & aerospace sectors.
The Quality Engineer, Bedford, Bedfordshire, will be responsible for ensuring that products and processes are compliant with quality standards such as AS9100. They will specialise in the creation of FAIR reports along with the traceability of production documentation.
The ideal candidate for the Quality Engineer, Bedford, Bedfordshire will have;
Experience with AS9102-C FAIR report creation
Previous experience working in a relatable manufacturing environment in the defence & aerospace industry, ideally within an electro-mechanical environment
Experience with creating PPAP’s and APQP reports
The Quality Engineer, Bedford, Bedfordshire, will have;
Proven experience in quality engineering, quality assurance /
Strong understanding of quality management systems.
Experience with Quality audits.
APPLY NOW for the Quality Engineer, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref. THD1410. Otherwise, we always welcome the opportunity to discuss other roles similar to Quality jobs on 01582 878 848.....Read more...
Multi-Skilled Maintenance Engineer (Nights)
Location: Northampton, Northamptonshire
Salary: £50,000
Shift: Sunday – Thursday
Industry: FMCG / Manufacturing
Company Overview
Synergi Search & Select are working on behalf of a leading FMCG manufacturer with operations across multiple markets. We are recruiting for a Multi-Skilled Maintenance Engineer to join their night shift engineering team.
Key Responsibilities
Carry out reactive and planned maintenance on high-speed production machinery
Support and deliver planned preventative maintenance schedules
Diagnose and repair mechanical and electrical faults to minimise downtime
Implement effective solutions for breakdowns and recurring issues
Ensure all work is carried out in line with company quality, health and safety standards
Candidate Requirements
Proven experience in a multi-skilled maintenance engineering role within FMCG, food, or manufacturing
Good knowledge of planned preventative maintenance systems
Strong fault-finding and problem-solving skills
Competent across mechanical and electrical systems, with experience of automation and PLCs desirable
Excellent awareness of Health & Safety in a manufacturing environment
Benefits
Salary up to £50,000
Fixed Sunday – Thursday night shift
Opportunity to work within a leading manufacturer with long-term career prospects
Training and development provided
Application Process
If you are interested in this opportunity, please apply via this advert or contact Anamika Sarkar on 01923 227 543. Alternatively, you can send your CV....Read more...
Field Service Engineer
Reading
£40,000 - £55,000 Basic + OTE £75,000 + Specialist Laser Training + OEM Training + Technical & Career Progression + Company Vehicle + Fuel Card + Personal Use + Pension + Holidays + Package
Become a specialist Field Service Engineer with a global leader in laser technology, where you'll receive industry-leading training, maximise your earnings to £75,000+, and build a long-term career with genuine progression opportunities into management or sales while significantly increasing your earnings.
This established manufacturer has over 40 years of success designing and supplying cutting-edge laser systems worldwide, offering exceptional technical development and clear progression into senior engineering, management, or technical sales. Due to continued growth, they are looking for a motivated Field Service Engineer who wants to become an expert in advanced laser technology while significantly increasing their earnings. You'll have the opportunity to earn £75,000+ in your first year, work on industry-leading equipment, and join a business that genuinely invests in its engineers and supports long-term career progression.
Your Role As A Field Service Engineer Will Include:
Service, repairs and installation of specialist laser equipment.
Fault finding on electrical and mechanical systems.
Covering customer sites across the UK and Ireland with occasional overnight stays.
Occasional visits to Bracknell area
The Successful Field Service Engineer Will Have:
Field Service Engineer experience with electrical and mechanical fault-finding skills.
Experience working on CNC machinery, laser equipment or similar industrial machinery (preferred).
Full UK driving licence.
Happy to travel across the UK and Ireland with occasional overnight stays and commutable to the Bracknell site.
Apply now or call Becka or Sophia on 07458163046 for immediate consideration.
Keywords: Field Service Engineer, Service Engineer, Mobile Engineer, Electrical Engineer, Mechanical Engineer, Electro-Mechanical Engineer, Electrical Service Engineer, Mechanical Service Engineer, Installation Engineer, Commissioning Engineer, Maintenance Engineer, Breakdown Engineer, Technical Service Engineer, Customer Support Engineer, After Sales Engineer, OEM Service Engineer, Equipment Engineer, Machinery Engineer, Industrial Engineer, Automation Engineer, Controls Engineer, PLC Engineer, Electronics Engineer, Mechatronics Engineer, CNC Service Engineer, Laser Engineer, Laser Systems Engineer, Capital Equipment Engineer, Manufacturing Engineer, Bracknell, Binfield, Wokingham, Reading, Crowthorne, Sandhurst, Camberley, Farnborough, Fleet, Hook, Basingstoke, Newbury, Maidenhead, Windsor, Slough, High Wycombe, Marlow, Henley-on-Thames, Ascot, Sunningdale, Virginia Water, Egham, Staines-upon-Thames, Woking, Guildford, Aldershot, Farnham, Godalming, Leatherhead, Uxbridge, Hayes, Heathrow, Didcot, Abingdon, Thatcham, Oxford, Berkshire, Surrey, Hampshire, Buckinghamshire, Oxfordshire, West London.....Read more...
An exciting opportunity has arisen for a Principal Mechanical Design Engineer to join one of the leading companies in RF and sensing technology, based in Essex.
Part of a globally recognised organisation, this company is driving innovation across the medical, aerospace, and defence industries. Their expertise has contributed to world-class projects such as the Hubble Space Telescope, cancer radiotherapy systems, and advanced driver-assistance technologies in luxury vehicles.
They are seeking a Principal Mechanical Design Engineer to join their Essex based R&D division, supporting the design and development of cutting-edge new products. This role is ideal for an engineer with several years of experience who enjoys hands-on design work, solving complex challenges, and collaborating within a multidisciplinary team.
Key Responsibilities
Support the mechanical design and development of products from concept through to manufacture.
Produce and maintain technical documentation, including drawings, models, and reports.
Participate in design reviews and assist in resolving engineering challenges alongside senior engineers.
Work closely with process, project, and manufacturing engineers to ensure designs meet performance, cost, and reliability targets.
Contribute ideas for process improvement and new product development.
Desirable Experience
Degree-qualified in Mechanical Engineering or a related discipline.
Proficiency in 3D CAD (e.G. SolidWorks, Creo, or similar).
Understanding of materials selection, mechanical systems, and manufacturing processes.
Experience with FEA or tolerance analysis is advantageous.
Strong problem-solving and teamwork skills.
Keen to learn, develop, and take ownership of your projects.
Due to the nature of the work, our client is unable to offer sponsorship — UK working rights are required.
This is an excellent opportunity for an Essex based Principal Mechanical Design Engineer looking to take the next step in their career working on advanced technology and contributing to high-impact, real-world applications.
Apply Now: Please send your CV to rwilcocks@redlinegroup.Com or contact Ricky Wilcocks on 01582 878810 for more information.....Read more...
Electrical Engineer required a global Engineering & Manufacturing company, offering 75 years of experience as the supplier of choice to Oil and Gas, Rail, Mining and Energy industries.This organisation design and manufacture innovative technologies for Electrical infrastructures and are actively searching for an experience Electrical Engineer to join their 2,000 plus global workforce.The successful Electrical Engineer will be easily able to commute to BRADFORD from surrounding towns & cities, including Leeds, Dewsbury, Keighley, Pudsey, Halifax, Brighouse and Shipley.Key Responsibilities of the Electrical Engineer will include:
Design and deliver electrical solutions for LV and MV systems in line with project and client requirements
Produce high-quality engineering drawings, schematics and all associated technical documentation
Create accurate Bills of Materials (BOMs) and detailed manufacturing data
Provide technical support across the full project lifecycle, ensuring successful delivery
Take part in Factory Acceptance Tests (FAT) and offer technical assistance to customers
Liaise with engineering, production and quality teams to ensure projects run smoothly
Track project progress and identify any risks or issues that could affect delivery timelines
Assist in recognising and mitigating technical and project-related risks
Support ongoing improvements to engineering processes, standards and best practices
For the Electrical Engineer role, we are keen to receive CV’s from candidates who possess:
Degree in Electrical Engineering or a related field, or equivalent hands-on experience
Experience working with LV and/or MV electrical systems such as switchgear, transformers and protection systems
Good understanding of control circuits, protection schemes and engineering documentation
Ability to interpret technical specifications and translate them into practical, workable solutions
Proficient in the use of CAD software, including AutoCAD or similar tools
Familiar with relevant industry standards such as IEC and BS EN
Strong organisational skills with the ability to manage multiple priorities effectively
Confident communicator, able to work with both technical and non-technical stakeholders
Previous exposure to testing, Factory Acceptance Tests (FATs) or technical reviews would be advantageous
Salary & Benefits:
£53,000 to £58,000 p/a depending on experience
Attractive Pension
33 Days annual leave
Healthcare
Life assurance
Cycle to work scheme
Monday to Friday 8am – 4pm
....Read more...
Electronics Design Engineer – Mixed Signal / Robotics
Are you an experienced Electronics Design Engineer with strong expertise in mixed-signal electronics, digital design, sensors and PCB development?
If so, our client is looking to hire an Electronics Design Engineer based in Cambridge.
Key responsibilities of this Electronics Design Engineer job based in Cambridge, Cambridgeshire:
Design and develop analogue and digital mixed-signal electronics for advanced robotic platforms
Design electronics to interface with robotic odometry systems, including IMUs, GPS and RTK
Develop and integrate digital electronics, sensors and associated interfaces
Design and validate CAN interfaces connecting robotic electronics to motor controllers
Work on electronics system architecture and contribute to ground-up system design
Produce schematics and PCB designs, taking designs from concept through to implementation
Progress existing prototype designs towards manufacturing and small-scale production
To be successful, you should have experience with:
4–5+ years' commercial experience as an Electronics Engineer or Electronics Design Engineer
Strong experience in mixed-signal electronics design, with a particular strength in digital electronics
Experience with analogue electronics and sensors
Experience with schematic capture and PCB design
Knowledge of interfaces such as CAN
Experience designing electronics for sensors and/or systems such as IMU, GPS or RTK would be beneficial
To apply for this Electronics Design Engineer – Mixed Signal / Robotics opportunity, please send your CV to NDrain@redlinegroup.Com or call 01582 878828.
....Read more...
A position for a Principal Test Engineer role based in Great Yarmouth, Norfolk has become available, offering hybrid working plus a fantastic 9-day working fortnight!
The Principal Test Engineer, based in Great Yarmouth, Norfolk will be responsible for defining, maintaining, and continuously improving test strategies, standards, processes, and technologies to ensure robust, efficient, and compliant product test solutions.
Ideal candidates for the Principal Test Engineer job based in Great Yarmouth, Norfolk will have experience across the following areas:
Extensive experience in test engineering within a manufacturing environment
Strong understanding of Automated test systems (ATE)
This is a fantastic opportunity for a Principal Test Engineer to join a well R&D & Production team that will provide superb on-the-job training and opportunities for career progression.
To apply for this Principal Test Engineer role in Great Yarmouth, Norfolk, please contact Tom Drew quoting ref. THD1300 on 01582 878848 or email TDrew@redlinegroup.Com. Otherwise, we welcome conversation regarding similar positions to Project Management roles.....Read more...
