The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
Mobile Commercial Gas Engineer - Manchester - National Facilities Management Organisation: HVAC contractor CBW Staffing Solutions have a fantastic opportunity for a Commercial Gas Engineer to join a leading facilities management organisation, on a permanent basis. You’ll carry out servicing, fault-finding, repairs and minor installations on a range of commercial heating systems across commercial sites. You will be working both independently and occasionally as part of a small team, covering Manchester, Liverpool & surrounding areas. Package:Competitive salary between £46,000 and £48,000 per annum (depending on experience)Van & fuel card suppliedBonus for achieved objectives based on achievable targetsCore hours are Monday - Friday (40 hours per week)Participation in an ‘out of hours’ on call rota (to be confirmed)25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunitiesResponsibilities:Servicing and maintenance of a variety of commercial gas appliances and systems, including boilers, heaters, and pipeworkPerform routine inspections and safety checks to ensure gas systems are operating efficiently and in compliance with industry standardsDiagnose and repair mechanical and electrical faults in gas appliances, ensuring minimal downtime and maximum safetyConduct gas leak tests and carbon monoxide checks to identify and mitigate potential hazardsCollaborate with other maintenance personnel and contractors to coordinate complex repairs and system upgradesAdhere to safety protocols and regulatory requirements to promote a safe working environmentQualifications:Proven experience as a Commercial Gas Engineer or similar role within the facilities management industryGas Safe Register certification and relevant qualifications (e.g. ACS, COCN1, CODNCO1)Full UK driving licenceStrong knowledge of commercial gas appliances, systems, and regulationsProficiency in diagnosing and troubleshooting mechanical and electrical faultsExcellent problem-solving skills and attention to detailAbility to work independently and as part of a teamEffective communication and customer service skillsInterested? Apply with a full & up to date CV or call Amy O’Shea at CBW Staffing Solutions.....Read more...
Electrical Maintenance Engineer – FM Service Provider – Education Environment – Hampstead, North West London | Up to £50,000 CBW Staffing Solutions are currently recruiting for an experienced Electrical Maintenance Engineer to join a leading Facilities Management service provider on a static contract within an educational environment in Hampstead, North West London. This is a single-person site role, where the successful candidate will take responsibility for all landlord and tenant M&E and fabric maintenance, covering both planned preventative and reactive maintenance. As the sole engineer on site, you'll need to be confident working independently with a broad range of electrical, mechanical and building services. Working Hours:Monday to Friday08:00 – 17:0040-hour weekOvertime available1-in-4/5 call-out rotaKey Duties & Responsibilities:Carry out PPM and reactive maintenance across the site.Lighting fault-finding, lamping, ballast replacement and small installations.Maintain control panels and power distribution systems.Carry out emergency lighting and fire alarm testing.Monitor and maintain AHUs and FCUs, including filter changes and cleaning.Reset and monitor chillers.Carry out basic maintenance on pumps and motors.Complete water treatment temperature checks (non-dosing).Carry out basic plumbing duties, including unblocking toilets and changing taps and seals.Monitor BMS systems, including heating and cooling.Monitor UPS systems and record readings.Complete general building fabric maintenance.Escort and liaise with specialist subcontractors.Maintain accurate records and ensure all works are completed safely and in line with site procedures.Package:Up to £50,000 per annum26 days annual leave + Bank HolidaysCompany PensionInternal and external trainingGenuine career progression opportunitiesOvertime available1-in-4/5 call-out rotaRequirements:Electrically qualified with relevant trade certificatesCity & Guilds / NVQ Level 2 & 317th or 18th EditionProven experience in commercial or property maintenanceStrong customer service and communication skillsAble to work independently and manage a single-person siteHonest, hardworking and reliableDBS check required due to the educational environmentTo apply or find out more, please send your CV to Bailey White at CBW Staffing Solutions.....Read more...
Our client, a global engineering business specialising in advanced aerospace systems and components, are looking for a Lead Electro-Mechanical Engineer in Gloucester to join their team on a permanent basis.
This is a senior technical role leading the definition, development and integration of complex electro-mechanical actuation and control systems across the full engineering lifecycle.
Key responsibilities of the Lead Electro-Mechanical Engineer job based in Gloucester:
Lead system-level requirements, architecture definition, integration and validation
Provide technical oversight of electro-mechanical actuation systems incorporating motors, braking systems, sensors, solenoids and control electronics
Lead multidisciplinary engineering teams and drive system-level technical decisions
Manage technical relationships with suppliers, reviewing designs, qualification evidence and technical changes
Define and lead system integration strategies and resolve complex system-level issues
Oversee verification, validation and certification activities against relevant aerospace and military standards
Lead technical reviews, risk assessments and system-level trade studies
Support production, flight test and in-service investigations, including root-cause analysis
Drive continuous improvement across systems engineering processes, tools and practices
Experience required for the Lead Electro-Mechanical Engineer job based in Gloucester:
Degree in Aerospace, Mechanical, Electrical, Mechatronics or Systems Engineering
Extensive experience with aerospace actuation systems or other high-integrity systems
Strong systems engineering experience covering architecture, integration, requirements and V&V
Experience using requirements management tools such as DOORS, Polarion or equivalent
Proven experience leading supplier technical activities and design reviews
Experience working to DO-178 and DO-254 requirements
Strong understanding of engineering drawings and interface specifications
Experience with modelling, simulation, MBSE/SysML or safety/reliability engineering desirable
Strong technical leadership, communication and problem-solving skills
UK national with the ability to attain BPSS and SC security clearance
If this Lead Electro-Mechanical Engineer job based in Gloucester could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816....Read more...
Mechanical Day Shift Engineer - FM Service Provider - Hospital - Lewisham - £48,900 Are you a Shift Engineer looking for a new challenge? Are you sick of working nights? If the answer is yes, then read on... A Fantastic opportunity to work for a leading FM Service Provider situated in Lewisham. CBW is currently looking for a Mechanical Day Shift Engineer to be based in a Healthcare environment in Lewisham. The successful candidate will be mechanically biased (NVQ, C&G, etc) with a proven track record in commercial building maintenance. Working with the maintenance team on-site, He or she will be required to carry out electrical, mechanical, and fabric maintenance to the following. In return, the company is offering a competitive salary of £48,900 for further training and career progression. Duties & Responsibilities:Monitor the mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricEscort specialist subcontractorsHours of work4 on 4 off - Days Only7 am - 7 pmPackageUp to £48,90022-day shift holiday Overtime availableCompany pension Season Ticket LoanPotential to be put through HV trainingRequirementsLevel 2 &3 in Mechanical Engineering (C&G, NVQ etc)A proven track record in Building MaintenanceGood Communication Skills.Multi-Skilled - Mechanical / Electrical.Knowledge of UPS / Generators / Power Distribution / HVAC / HV LV (Desirable)Good Leadership & Management skillsIf you are interested, please email your CV to Archie Reed of CBW Staffing Solutions to avoid missing out!....Read more...
lectrical Shift Maintenance Engineer – Kensington, London - £50,000 (Basic) + £5,000 Shift Allowance (Total Package £55,000) We have a fantastic opportunity for a skilled Electrical Shift Maintenance Engineers to join a leading maintenance company in the heart of Kensington, London. This position involves working at a prestigious event space/building for a renowned property management company, ensuring the smooth running of high-profile estate. You will be responsible for carrying out Planned Preventative Maintenance (PPMs), reactive maintenance, statutory compliance, and general building maintenance tasks. Hours: Continental Shift Pattern:Days: 07:00 AM – 19:00 PMNights: 19:00 PM – 07:00 AMJobs Available:4 x Electrical Shift EngineersKey Responsibilities:Perform Electrical and Mechanical PPMs and reactive maintenance tasks.Ensure all systems are in compliance with statutory requirements and operational standards.Carry out maintenance on key systems, including HVAC plant, fire alarms, emergency lighting, water treatment, air conditioning, and chillers.Work with three-phase and single-phase electrical systems, Building Management Systems (BMS), and electrical monitoring systems.Maintain pumps, motors, Variable Speed Drives, and other critical mechanical systems.Provide top-tier maintenance support within a high-profile corporate office environment.Collaborate with a small team to deliver exceptional service to the client.Requirements:Apprentice-trained and experienced in building services.City & Guilds Level 2 & 3 in Electrical (or equivalent).Must hold the 17th/18th Edition of the IET Wiring Regulations.DBS ClearanceClient-facing experience is preferred.Commercial building maintenance experience is a must.Familiarity with electrical and mechanical systems like FCUs (Fan Coil Units), AHUs (Air Handling Units), and chillers.Package & Benefits:Basic Salary: £50,000 + £5,000 Shift AllowanceTotal Package: £55,00022 Days Annual LeavePension and Healthcare benefits.Overtime opportunities for additional earnings.Access to internal and external training courses.Excellent career progression opportunities, with the potential to move into supervisory roles and beyond.How to Apply: If you're looking for an exciting opportunity to develop your skills and progress within a thriving organization, please send your CV to Charlie Long at CBW Staffing Solutions. Interviews can be arranged immediately for the right candidates.....Read more...
Our client, a well-established technology business specialising in electronic and embedded systems, are looking for a Systems Engineer to join their team on a permanent basis.
This is a multidisciplinary engineering role focused on the development of application-specific embedded products, working across firmware, electronics and mechanical hardware to ensure systems meet customer requirements and deliver reliable, efficient and secure solutions.
Key responsibilities of the Systems Engineer job based in Lymington:
Support the definition of overall embedded system architecture, considering performance, scalability and power efficiency.
Interpret user and customer needs and translate them into clear technical system requirements.
Define and negotiate requirements for firmware, electronic and mechanical hardware development.
Work closely with Product Management, Sales and other stakeholders to establish and communicate technical requirements.
Collaborate with software, electronics and mechanical engineering teams throughout the development lifecycle.
Support the integration of hardware and software components to ensure complete system functionality.
Develop and execute system-level test and validation plans.
Troubleshoot and debug embedded systems to identify and resolve technical issues.
Ensure systems meet defined performance, reliability and security requirements.
Produce and maintain comprehensive technical documentation covering system design, functionality and requirements.
Experience required for the Systems Engineer job based in Lymington:
Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science or a related engineering discipline.
Experience working with embedded systems and application-specific electronic products.
Proficiency in C and C++ programming languages.
Knowledge of modern operating system concepts, IP protocols and hardware interfaces.
Understanding of electronics and PCB design, with experience using relevant design or EDA tools.
Experience with embedded systems debugging tools and techniques.
Strong understanding of system-level development, integration, testing and validation.
Excellent problem-solving and critical-thinking skills.
Strong communication skills with the ability to work effectively across multidisciplinary engineering teams.
Ability to translate customer and user requirements into practical technical solutions.
If this Systems Engineer job based in Lymington could be of interest, please send your CV to bwiles@redlingroup.Com or call Ben on 01582 878816....Read more...
Mobile Maintenance Engineer – Covering All of London – FM Provider – £43,000 + Van & Fuel Card Are you an experienced Electrical Maintenance Engineer looking for a fresh challenge across a varied commercial portfolio? CBW Staffing Solutions are currently recruiting for a Mobile Maintenance Engineer to join a leading FM provider. You'll be responsible for both planned and reactive maintenance across a portfolio of commercial sites, covering all of London. If you're multi-skilled, proactive, and thrive in a mobile environment, this could be the role for you. What's in it for you?Up to £43,000 per annumCompany Van & Fuel CardMonday to Friday, 8:00 AM – 5:00 PM (40 hours/week)Overtime available + 1 in 8 Call-Out RotaOngoing in-house training & career progressionKey ResponsibilitiesDelivering high-quality PPM and reactive maintenance across a range of commercial buildingsElectrical and mechanical maintenance, including:BMS systemsHVAC, AHUs, and FCUsBuilding fabric repairsWater treatment and general plumbing tasksResponding to helpdesk requests and ensuring KPIs and SLAs are metWorking independently and collaboratively across multiple contractsSite Cover for Holiday and sickmessWhat We're Looking ForCity & Guilds Level 2 & 318th Edition certifiedMulti-skilled with a solid understanding of facilities managementAble to pass a DBS checkGood organisational and administrative abilitiesWillingness to work overtime when requiredIf you are interested please send a copy of your CV to Dan Barber at CBW Staffing Solutions....Read more...
Mobile Multi-Skilled Engineer – Commercial Sites – Bristol / South West & Wales – Up to £45,000 CBW Staffing Solutions are currently recruiting for a Mobile Multi-Skilled Engineer, ideally with an electrical bias, to cover a portfolio of commercial properties across Bristol, the South West, South Wales and West Wales. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM), reactive maintenance and general building services works across a varied portfolio of sites. This is an excellent opportunity for an engineer who enjoys working independently, travelling between sites and dealing with a variety of maintenance requirements. Key Duties & Responsibilities:Carry out planned preventative and reactive maintenance across multiple sites.Electrical maintenance, fault-finding and minor installation works.Lighting, emergency lighting and power distribution.Testing and maintenance of electrical systems and equipment.Basic mechanical maintenance, including pumps, motors, AHUs and FCUs.Carry out general plumbing and building fabric maintenance.Monitor and investigate faults with building services equipment.Complete routine plant and equipment checks.Respond to reactive maintenance issues and breakdowns.Liaise professionally with clients, site contacts and contractors.Complete maintenance records, job sheets and compliance documentation.Ensure all works are completed safely and in line with relevant Health & Safety procedures.Travel between sites across Bristol, the South West, South Wales and West Wales.Hours & Package:Salary up to £45,000 per annumMonday to Friday – 08:00–17:00Call-out rota – details to be confirmedCompany vehicle + fuel card22 days annual leave + bank holidays Overtime opportunitiesOngoing training and developmentRequirements:Electrically or mechanically qualified – City & Guilds / NVQ Level 2 or above18th Edition desirable for electrically biased candidatesProven experience within commercial building maintenanceMulti-skilled building services experienceStrong electrical or mechanical maintenance and fault-finding skillsFull UK driving licenceGood communication and customer service skillsMust be able to travel across the required areaPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Mobile Multi-Skilled Engineer – Commercial Sites – London / South East & East Anglia – Up to £45,000 CBW Staffing Solutions are currently recruiting for a Mobile Multi-Skilled Engineer, ideally with an electrical bias, to cover a portfolio of commercial properties across London, the South East and East Anglia. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM), reactive maintenance and general building services works across a varied portfolio of sites. This is an excellent opportunity for an engineer who enjoys working independently, travelling between sites and dealing with a variety of maintenance requirements. Key Duties & Responsibilities:Carry out planned preventative and reactive maintenance across multiple sites.Electrical maintenance, fault-finding and minor installation works.Lighting, emergency lighting and power distribution.Testing and maintenance of electrical systems and equipment.Basic mechanical maintenance, including pumps, motors, AHUs and FCUs.Carry out general plumbing and building fabric maintenance.Monitor and investigate faults with building services equipment.Complete routine plant and equipment checks.Respond to reactive maintenance issues and breakdowns.Liaise professionally with clients, site contacts and contractors.Complete maintenance records, job sheets and compliance documentation.Ensure all works are completed safely and in line with relevant Health & Safety procedures.Travel between sites across London, the South East and East Anglia.Hours & Package:Salary up to £45,000 per annumMonday to Friday – 08:00–17:00Call-out rota – details to be confirmed22 days annual leave + bank holidaysCompany vehicle + fuel cardOvertime opportunitiesOngoing training and developmentRequirements:Electrically or mechanically qualified – City & Guilds / NVQ Level 2 or above18th Edition desirable for electrically biased candidatesProven experience within commercial building maintenanceMulti-skilled building services experienceStrong electrical or mechanical maintenance and fault-finding skillsFull UK driving licenceGood communication and customer service skillsMust be able to travel across the required areaPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Mobile Multi-Skilled Engineer – Commercial Sites – Thames Valley / South Coast & East Midlands – Up to £45,000 CBW Staffing Solutions are currently recruiting for a Mobile Multi-Skilled Engineer, ideally with an electrical bias, to cover a portfolio of commercial properties across the Thames Valley, South Coast and East Midlands. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM), reactive maintenance and general building services works across a varied portfolio of sites. This is an excellent opportunity for an engineer who enjoys working independently, travelling between sites and dealing with a variety of maintenance requirements. Key Duties & Responsibilities:Carry out planned preventative and reactive maintenance across multiple sites.Electrical maintenance, fault-finding and minor installation works.Lighting, emergency lighting and power distribution.Testing and maintenance of electrical systems and equipment.Basic mechanical maintenance, including pumps, motors, AHUs and FCUs.Carry out general plumbing and building fabric maintenance.Monitor and investigate faults with building services equipment.Complete routine plant and equipment checks.Respond to reactive maintenance issues and breakdowns.Liaise professionally with clients, site contacts and contractors.Complete maintenance records, job sheets and compliance documentation.Ensure all works are completed safely and in line with relevant Health & Safety procedures.Travel between sites across the Thames Valley, South Coast and East Midlands.Hours & Package:Salary up to £45,000 per annumMonday to Friday – 08:00–17:00Call-out rota – details to be confirmed22 days annual leave + bank holidaysCompany vehicle + fuel cardOvertime opportunitiesOngoing training and developmentRequirements:Electrically or mechanically qualified – City & Guilds / NVQ Level 2 or above18th Edition desirable for electrically biased candidatesProven experience within commercial building maintenanceMulti-skilled building services experienceStrong electrical or mechanical maintenance and fault-finding skillsFull UK driving licenceGood communication and customer service skillsMust be able to travel across the required areaPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
A job as a Senior Electronics Engineer is urgently required for a in Cambridge, Cambridgeshire.
An exciting new job has arisen for a Senior Electronics Engineer, based in Cambridge, Cambridgeshire to work for a world leader in the design and manufacture of custom RF, microwave and millimetre wave components and subsystems.
The Senior Electronics Engineer, located in Cambridge, Cambridgeshire will be responsible for the design and development of RF/mmW sub-circuits, sub-modules and systems within telecommunications and defence products. You will play a pivotal role in the analogue and digital circuit design, schematic capture and PCB layout, ensuring that electrical performance, quality, cost and manufacturability requirements are met.
The ideal Senior Electronics Engineer, based in Cambridge, Cambridgeshire will have previous experience across;
Experience in circuit schematic, multi-layer, mixed-technology layout using Altium Design package.
Component level electronic circuit design, layout, and development.
Digital circuits utilising glue logic, ADCs, DACs & microprocessors.
APPLY NOW! For the Senior Electronics Engineer job, located Cambridge, Cambridgeshire by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref. THD1397. Otherwise, we always welcome the opportunity to discuss other roles similar to Electronic Engineering jobs on 01582 878 848.....Read more...
Site based Maintenance Electrician - Wetherby - Global Facilities Management Organisation CBW Staffing Solutions are currently recruiting for a Maintenance Electrician to join a facilities management team at a site in Wetherby. This is an excellent opportunity for an electrically qualified engineer looking to develop their career, with a clear progression route into a High Voltage (HV) Electrician position. Full training and relevant HV qualifications will be fully funded by the employer. The successful candidate will be responsible for carrying out planned and reactive electrical maintenance across the site, ensuring all electrical systems and equipment are maintained to a high standard. PackageCompetitive salary up to £44,000 per annum (depending on experience)Participation in an 'out of hours' on call rota25 days annual leave plus bank holidaysGenerous workplace pension schemeTraining, development & progression opportunities ResponsibilitiesCarry out planned preventative maintenance (PPM) and reactive maintenance on electrical systemsDiagnose and repair electrical faults across the siteEnsure all electrical maintenance is completed in line with health and safety regulationsAssist with general building services maintenance where requiredComplete maintenance records and ensure all work is accurately documentedSupport the wider engineering team in maintaining the site's electrical infrastructureUndertake full HV training and qualifications, progressing towards an HV Electrician positionRequirementsNVQ Level 3 or equivalent in Electrical Installation or Electrical MaintenancePrevious experience in electrical maintenance, ideally within facilities management or a commercial environmentGood fault-finding and diagnostic skillsKnowledge of planned and reactive maintenanceA proactive approach with the ability to work independently and as part of a teamA genuine interest in developing a career within high voltage engineeringInterested? Apply with a full & up to date CV or contact Amy O'Shea at CBW Staffing Solutions.....Read more...
Mobile AC Engineer – FM Service Provider – Hertfordshire Area – Van Mobile – Up to £48,000 + Package CBW Staffing Solutions is currently recruiting for a Mobile Air Conditioning Engineer to carry out planned and reactive maintenance across a portfolio of commercial sites throughout the Hertfordshire area. The successful candidate will have a strong background in air conditioning and refrigeration maintenance, with experience working across commercial buildings. This is an excellent opportunity for an experienced AC Engineer looking for a stable mobile position with further training and progression available. Hours of Work:Monday to Friday08:00 – 17:00Overtime availableKey Duties & Responsibilities:Carrying out planned and reactive maintenance across air conditioning and refrigeration systems.Servicing and maintaining split systems, VRVs, VRFs and VAV systems.Maintenance of AHUs and FCUs.Servicing and maintaining chillers and associated HVAC plant.Carrying out fault finding and diagnosing AC and refrigeration issues.Completing pressure and leak testing.Carrying out compressor changes.Brazing and associated refrigeration repairs.Responding to reactive breakdowns and equipment faults.Carrying out basic electrical fault finding where required.Completing maintenance records and service reports.Liaising with clients and site teams.Ensuring all works are completed safely and in line with company procedures.Package:Up to £48,000 basic salaryCompany van & fuel cardPrivate use of vanTravel paid after the first 30 minutes each way25 days annual leave plus bank holidaysOvertime availableTablet and work phone providedFull company uniformFurther training and developmentExcellent career progression opportunitiesRequirements:City & Guilds Level 2 Air Conditioning & Refrigeration qualification or equivalentF-Gas qualification – EssentialProven experience servicing and maintaining commercial AC and HVAC systems.Previous commercial building maintenance experience.Strong fault-finding and diagnostic skills.Electrical knowledge would be advantageous.Good overall building services knowledge.Multi-skilled approach to maintenance.Must be able to provide copies of relevant trade certificates.Good communication and client-facing skills.Full UK Driving Licence.Please send your CV to Bailey White at CBW Staffing Solutions to avoid missing out on this opportunity.....Read more...
Mobile AC Engineer – FM Service Provider – Surrey Area – Van Mobile – Up to £48,000 + Package CBW Staffing Solutions is currently recruiting for a Mobile Air Conditioning Engineer to carry out planned and reactive maintenance across a portfolio of commercial sites throughout the Surrey area. The successful candidate will have a strong background in air conditioning and refrigeration maintenance, with experience working across commercial buildings. This is an excellent opportunity for an experienced AC Engineer looking for a stable mobile position with further training and progression available. Hours of Work:Monday to Friday08:00 – 17:00Overtime availableKey Duties & Responsibilities:Carrying out planned and reactive maintenance across air conditioning and refrigeration systems.Servicing and maintaining split systems, VRVs, VRFs and VAV systems.Maintenance of AHUs and FCUs.Servicing and maintaining chillers and associated HVAC plant.Carrying out fault finding and diagnosing AC and refrigeration issues.Completing pressure and leak testing.Carrying out compressor changes.Brazing and associated refrigeration repairs.Responding to reactive breakdowns and equipment faults.Carrying out basic electrical fault finding where required.Completing maintenance records and service reports.Liaising with clients and site teams.Ensuring all works are completed safely and in line with company procedures.Package:Up to £48,000 basic salaryCompany van & fuel cardPrivate use of vanTravel paid after the first 30 minutes each way25 days annual leave plus bank holidaysOvertime availableTablet and work phone providedFull company uniformFurther training and developmentExcellent career progression opportunitiesRequirements:City & Guilds Level 2 Air Conditioning & Refrigeration qualification or equivalentF-Gas qualification – EssentialProven experience servicing and maintaining commercial AC and HVAC systems.Previous commercial building maintenance experience.Strong fault-finding and diagnostic skills.Electrical knowledge would be advantageous.Good overall building services knowledge.Multi-skilled approach to maintenance.Must be able to provide copies of relevant trade certificates.Good communication and client-facing skills.Full UK Driving Licence.Please send your CV to Charlie at CBW Staffing Solutions to avoid missing out on this opportunity. ....Read more...
Electrical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £57,000 + up to £3,000 annual bonus Pension: Up to 15% total (10% employer, 5% employee)
Overview
We are seeking a highly skilled Electrical Maintenance Engineer to join a large engineering team at a state‑of‑the‑art, highly automated manufacturing facility. This is a brand‑new, high‑volume production site—set to become one of the fastest in Europe—offering excellent training, modern equipment, and long-term progression.
This position has become available due to an engineer leaving, creating an excellent opportunity for a strong electrically‑biased engineer to join a well-supported and forward‑thinking team.
Key Responsibilities
Provide electrical maintenance, fault finding, and repair across a variety of automated manufacturing equipment.
Work on conveyors, mixers, ovens, kilns and other large-scale industrial machinery.
Support continuous improvement, reliability, and efficiency across the site.
Work within a large engineering team (approx. 20 engineers), ensuring safe and efficient operation of all equipment.
Complete handover processes daily (5:30–6:00).
Participate in holiday cover to reduce banked hours (296 hours reducing to 206 after handover deductions).
Undertake planned and reactive maintenance in a dusty, fast‑paced FMCG/industrial environment.
Overtime & Hours Structure
You will have 206 banked hours annually (equivalent to 18 days of overtime per year).
These hours can only be reduced through holiday cover.
Weekend holiday cover = time and a half deduction.
Any overtime not related to holiday cover = paid at time and a half.
Essential Requirements
Electrically qualified (City & Guilds / NVQ / HNC or equivalent).
Strong electrical bias with excellent fault‑finding skills.
Experience in FMCG or heavy industrial environments.
Experience with industrial electrical panels.
Exposure to automation, complex machinery, and fast‑paced engineering settings.
Desired Skills
Siemens experience (including Siemens S7)—desirable but not essential.
Ability to work within highly automated environments.
Experience in large production or manufacturing facilities.
Benefits
Up to 15% total pension (company contributes 10% when you contribute 5%).
Strong training and development opportunities.
Chance to work at a brand‑new, cutting-edge automated site with major production output.
Progression opportunities within a large engineering function.
Working Environment
Dusty industrial environment.
Highly automated systems and robotics.
Fastest producing site in Europe (target).
Large, supportive engineering team (approx. 20 engineers).
Interview Process
Stage 1: Informal technical discussion with Carl, reviewing your CV and experience.
Stage 2: On‑site technical assessment with an engineer.
Bring overalls & safety shoes.
Walk‑through of site.
Basic practical test (panel work, fault finding).
....Read more...
Day Shift Engineer – 4 on 4 off - Large Tourist Attraction –Tottenham Court Road, London –£44,000 Per annumExciting opportunity to work for an established FM Property company based in London. CBW is currently recruiting for a day-shift engineer to be based at a large tourist attraction by Tottenham Court Road. The successful candidate will be a fully qualified electrical or mechanical engineer with a proven track record in commercial/property building maintenance and be able to turn their hand to a variety of maintenance tasks. He or she will be required to carry out electrical or mechanical planned and reactive maintenance / Installation across this large static site. Working with the maintenance team on site. He or she will be required to have an understanding/hands-on experience of the below. In return, the company offers a competitive salary, further training, overtime and the chance to work at this unique and interesting site.Package & Hours of WorkUp to £44,0004 on 4 off, Shift Pattern 07:00 am to 19:00 pm/ 10:00 am to 22:00 pmUniform and Tools ProvidedCycle to work scheme22 days holidayOvertime AvailablePensionInternal Progression & DevelopmentKey Duties & ResponsibilitiesEscort specialist subcontractorsEnsure that the Contractual efficiently meets all the relevant KPI & SLA requirements.Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Electrical Duties:Carry out Electrical PPM's and reactive maintenance Lighting – lamp changes, ballast changes, simmtronic/Phillips lightingEmergency light testingPower distributionElectrical fault-findingSmall works – new sockets, new lights, new circuitsTransformersStar Delta StartersMinor installationsMechanical Duties:Monitor mechanical plantPumps, Motors, Seals, BearingsAir Conditioning - Air Handling Units / Fan Coil Units (Filter changes, cleaning)Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toilets, replacing taps, washers etcMonitor the BMS systems.Basic electrical duties (Lamp changes etc)General building fabricRequirementsElectrical qualified level 2&3 (C&G, NVQ etc) with 18th Edition or Mechanically qualified level 2 (C&G, NVQ etc)Experience working in a large commercial buildingYou must be able to provide copies of your trade certificates (Essential)A proven track record in commercial building maintenanceMulti-skilledGood communication skillsExcellent customer skillsMust be able to get to the site for 07:00 am startPlease reach out to Alex Denton of CBW Staffing Solutions to avoid missing out on this opportunity!....Read more...
Our client, a fast-growing engineering business specialising in advanced automation and machinery solutions, are looking for a Mechanical Design Engineer in County Louth to join their team on a permanent basis.
This is a hands-on design role focused on developing automated equipment and mechatronic machinery, working closely with multidisciplinary engineering teams from initial concept through to project delivery.
Key responsibilities of the Mechanical Design Engineer job in County Louth:
Design and develop automated equipment to meet customer requirements
Own mechanical design elements from concept through to project delivery
Produce 2D and 3D designs and detailed drawings using SolidWorks
Design mechatronic equipment including mechanisms, transfer systems, servo systems, robotics, pneumatics and machine guarding
Review customer requirements and ensure designs meet project specifications
Manage technical documentation and design change control
Work collaboratively with multidisciplinary engineering and project teams
Plan and prioritise work across multiple projects
Support problem solving and continuous improvement initiatives
Ensure designs and processes comply with ISO9001 and relevant quality standards
Experience required for the Mechanical Design Engineer job in County Louth:
Bachelor's degree in Mechanical, Automation, Electrical, Electronic Engineering or a related discipline
Experience in machine design
Strong experience designing automated machinery and mechatronic systems
Proficiency with SolidWorks and 2D/3D mechanical design
Good understanding of automation principles and engineering processes
Experience working within multidisciplinary engineering teams
Knowledge of robotics and machinery safety standards desirable
Strong problem-solving, communication and organisational skills
Confident, professional and ambitious approach
Experience with Rockwell, Siemens or other automation platforms desirable
If this Mechanical Design Engineer job in County Louth could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816.....Read more...
We are looking for an experienced Principal Systems Engineer to support the design, integration, testing, and delivery of complex engineering systems. The role involves working across the full systems lifecycle, from initial concept and requirements through to verification, acceptance, and customer delivery.
The successful candidate will work with multidisciplinary teams across software, electronics, and mechanical engineering, supporting system development, risk management, technical documentation, and continuous improvement.
Key Responsibilities
Lead systems design, integration, verification, and testing activities.
Support projects through the full engineering lifecycle.
Work closely with software, electrical, and mechanical engineering teams.
Manage technical risks and contribute to project delivery.
Produce technical reports, specifications, and documentation.
Support design reviews and mentor junior engineers.
Communicate with internal teams, customers, and suppliers.
Key Skills
Experience in Systems Engineering, Systems Integration, or Product Development.
Background in aerospace, defence, electronics, automotive, or other complex engineering environments.
Knowledge of system testing, verification, and engineering processes.
Understanding of electronics, communications protocols, or embedded systems is desirable....Read more...
We are looking for an experienced Principal Systems Engineer to support the design, integration, testing, and delivery of complex engineering systems. The role involves working across the full systems lifecycle, from initial concept and requirements through to verification, acceptance, and customer delivery.
The successful candidate will work with multidisciplinary teams across software, electronics, and mechanical engineering, supporting system development, risk management, technical documentation, and continuous improvement.
Key Responsibilities
Lead systems design, integration, verification, and testing activities.
Support projects through the full engineering lifecycle.
Work closely with software, electrical, and mechanical engineering teams.
Manage technical risks and contribute to project delivery.
Produce technical reports, specifications, and documentation.
Support design reviews and mentor junior engineers.
Communicate with internal teams, customers, and suppliers.
Key Skills
Experience in Systems Engineering, Systems Integration, or Product Development.
Background in aerospace, defence, electronics, automotive, or other complex engineering environments.
Knowledge of system testing, verification, and engineering processes.
Understanding of electronics, communications protocols, or embedded systems is desirable....Read more...
We are looking for a Subsea Mechanical Design Engineer with experience in subsea connectors, high-reliability mechanical systems. You will design and develop high-performance mechanical solutions for subsea and offshore applications, working closely with multidisciplinary engineering, manufacturing, quality, and project teams.
Key Responsibilities
Design and develop subsea electrical and optical connectors, pressure housings, and sealing systems using 3D CAD.
Produce detailed 3D models, 2D drawings, BOMs, and technical documentation.
Perform and interpret FEA, mechanical, thermal, and pressure analysis.
Select suitable materials for high-pressure, high-temperature and subsea environments, including corrosion-resistant materials.
Support prototype, pressure, qualification, and integrity testing.
Ensure designs meet relevant API, ISO, ASME, IEC and IEEE standards.
Lead or support design reviews, RCA, FMEA, DFMEA, PFMEA, and engineering change activities.
Work with electrical, controls, manufacturing, quality, procurement, and installation teams.
Skills and Experience
Bachelor or Master degree in Mechanical Engineering or a related discipline.
Four relevant mechanical engineering experience, ideally in subsea, offshore, oil and gas, marine, aerospace, defence, or other high-reliability environments.
Strong experience with 3D CAD and 2D engineering drawings.
Experience with FEA and simulation tools.
Understanding of pressure-rated designs, sealing systems, materials, and corrosion.
Experience with subsea equipment such as connectors, umbilicals, jumpers, manifolds or subsea trees is highly desirable.
Strong analytical, problem-solving, communication, and teamwork skills.....Read more...
We are looking for a Subsea Mechanical Design Engineer with experience in subsea connectors, high-reliability mechanical systems. You will design and develop high-performance mechanical solutions for subsea and offshore applications, working closely with multidisciplinary engineering, manufacturing, quality, and project teams.
Key Responsibilities
Design and develop subsea electrical and optical connectors, pressure housings, and sealing systems using 3D CAD.
Produce detailed 3D models, 2D drawings, BOMs, and technical documentation.
Perform and interpret FEA, mechanical, thermal, and pressure analysis.
Select suitable materials for high-pressure, high-temperature and subsea environments, including corrosion-resistant materials.
Support prototype, pressure, qualification, and integrity testing.
Ensure designs meet relevant API, ISO, ASME, IEC and IEEE standards.
Lead or support design reviews, RCA, FMEA, DFMEA, PFMEA, and engineering change activities.
Work with electrical, controls, manufacturing, quality, procurement, and installation teams.
Skills and Experience
Bachelor or Master degree in Mechanical Engineering or a related discipline.
Four relevant mechanical engineering experience, ideally in subsea, offshore, oil and gas, marine, aerospace, defence, or other high-reliability environments.
Strong experience with 3D CAD and 2D engineering drawings.
Experience with FEA and simulation tools.
Understanding of pressure-rated designs, sealing systems, materials, and corrosion.
Experience with subsea equipment such as connectors, umbilicals, jumpers, manifolds or subsea trees is highly desirable.
Strong analytical, problem-solving, communication, and teamwork skills.....Read more...
An opportunity has arisen for a Door Engineer to join a well-established security solutions provider, specialising in high-quality security, fire, and industrial door services across various sectors.
As a Door Engineer, you will be installing, servicing and repairing industrial and automatic door systems across customer sites in the South of the UK. This full-time permanent role offers a salary range of £40,000 - £50,000 and benefits.
You will be responsible for servicing clients across the South of the UK, ideally based in Kent, Hampshire, Sussex, Dorset, or the surrounding areas.
You will be responsible for
* Installing, maintaining and repairing industrial doors and associated equipment.
* Carrying out inspections, identifying faults and resolving technical issues.
* Travelling to customer sites across the South of the UK.
* Working safely and in line with relevant health and safety requirements.
* Liaising professionally with customers and colleagues during site visits.
* Ensuring work is completed safely and to the required standard.
* Servicing automatic and pedestrian door systems where required.
The candidates from the following background will be considered:
* Door Engineer, Industrial Door Engineer, Automatic Door Engineer, Door Technician, Shutter Engineer, Roller Shutter Engineer, Service Engineer or in a similar role.
What we are looking for
Essential:
* Approx. 2 years' experience working with industrial doors.
* A valid CSCS card is essential.
* Sound knowledge of installing, servicing and repairing industrial doors.
* The ability to work independently as well as alongside a wider team.
* A good understanding of health and safety requirements.
* A clean UK driving licence.
Desirable:
* Experience with automatic doors.
* An electrical qualification.
* Access Control experience.
Whats on offer
* Competitive salary
* Company car.
* Company pension.
* On-site parking.
This is an excellent opportunity for a Door engineer to join a respected organisation and make a real impact.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
This Maintenance Engineer role offers a fantastic salary of £51,000 and the opportunity to work with one of the UK’s largest manufacturing organisations at its facility in Throckley. Benefits include a 5% KPI bonus, a 10% pension match, overtime at a premium, and electrical training to become multi-skilled.
The successful Maintenance Engineer will benefit from:
A base salary up to £51k per annum, plus bonus, and overtime also available at a minimum of x 1.5, x 2
Company pension matched up to 10%
Share option scheme, plus employee benefits program
Continental shift pattern - Days and Nights
Training programs, electrical training and qualifications to become multi-skilled and career development opportunities etc.
Key Responsibilities of the Maintenance Engineer:
To carry out essential planned mechanical maintenance and complete necessary repairs to keep factories in good working order
Involvement in on-going process improvement throughout the factories, developing new ideas and better solutions
Carry out Planned Preventative Maintenance, Inspections, Service and Repairs, hydraulic machinery, bearings, shafts, conveyor-based systems etc.
Qualifications & Experience:
Applicants must hold a recognised Mechanical Engineering qualification such as an Advanced Apprenticeship & or; Level 3 NVQ with BTEC Level 3 or above, City & Guilds in Mechanical Engineering/Craft studies
Demonstrable knowledge & expertise in PPM and reactive maintenance on Industrial Plant & Equipment
High degree of Health & Safety awareness.
In return, you will be offered a truly varied role within a dynamic and a fast-paced business, providing opportunities to develop your skill set and progress your career. If interested, please apply now!....Read more...
Electrical Engineer required to provide innovative and cost-effective product reliability solutions by developing or evolving techniques, procedures or products.
Qualification requirement
Minimum BSc in Electrical Engineering or Mechatronics or equivalent.
Role Responsibilities
Analyse, design, develop and maintain products and assist in their commercialization
Build prototypes, products and systems suitable for testing. Set up and run lab simulations. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects.
Produce analyses and mathematical models, and draw design conclusions based on those.
Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Contribute to design standards and support design re-use.
Author technical reports, papers, articles, patents and presentations. Share expertise via Eureka and special interest groups. Expand informal network throughout the organization.
Keep abreast of novel technical concepts and markets. Adopt new practices readily in order to develop innovative and low-cost products.
Maintain familiarity with company technology, organization and business.....Read more...
