Expectations at Company, Site and College. Learn, Develop and ensure standards of HSE, food safety at all times. Follow all H&S and Environmental procedures and regulations
Maintain professional attitude, timekeeping and standards all times as a representative of SD Guthrie
Ensure all training requirements are met and successfully complete training, assessments, assignments set
Take part in continuous improvement initiatives within the engineering department
Carry out routine maintenance inspections
Apply technical and academic skills
Fault finding diagnostics on mechanical, electrical and control systems
Participate in project work, upgrades and new equipment installation
Maintain accurate records of work completed
Communicate effectively with colleagues, Supervisors and external providers
Training:Food and Drink Maintenance Engineer Level 3 Apprenticeship Standard:
1st yr block release 24 weeks at NWTC
2nd /3rd yr a mixture of shorter blocks 12 weeks
Most of your time will be spent at the employer being trained and assessed in your workplace
The company and our Technical Training Assessor will support your time of learning offering guidance throughout
We monitor your Apprenticeship to ensure you achieve mandatory requirements core skills knowledge and occupational behaviours in preparation for your end point assessment.Training Outcome:
At the end of the apprenticeship, candidates will be suitably trained and continue their employment in a suitable role where available
Potential continuation of education and academic studies i.e. HNC
Continued professional development
Further in-house and external training and development available
Employer Description:SD Guthrie International is the world's leading producer of certified sustainable palm oil, and the Liverpool site is Europe's first dedicated sustainable palm oil refinery. SD Guthrie International Liverpool Refinery offer a range of high quality, sustainable performance vegetable oil and fat ingredients in bulk or packed.Working Hours :Monday - Friday, 08:00 - 16:00 including a 30-minute unpaid break each day.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness,Strong focus on H&S,Good time management,Motivated....Read more...
Service, maintenance and installation of heavy-duty heating and cooling systems and components
Health and Safety and environmental legislation and working practices
Fault diagnosis and rectification through root cause analysis
Safe handling of refrigerants (including ammonia and CO2)
Electrical systems
Communication and customer care
Training:Maintenance and Operations Engineering Technician Level 3.
You'll be assigned a personal mentor and start by shadowing our experienced engineers on site, gaining hands on experience and expanding your skillset from day one. Our training team will keep in touch with regular catchups to support your development. You'll study in day or block release periods at college alongside apprentices from other companies and industries.Training Outcome:After completing your apprenticeship, you can continue to progress through Star's engineer development pathway with salary increases along the way. Some of our engineers have gone on to become service and maintenance managers, regional managers or even directors. You will also have transferable engineering skills that can be valuable to other departments such as sales or design should you wish to try something different. A number of our engineers have also gone on to study at degree level. The possibilities are endless!Employer Description:Star Refrigeration is the UK’s largest independent industrial refrigeration engineering company, founded in 1970, working with customers from design to commissioning and maintenance, supported by a nationwide branch structure. The company is comprised of six business units and currently has around 400 employees throughout the group. We are an Investors in People Platinum and Investors in Young People Gold accredited employer and recognise the important role our employees play in our success which is why they are at the heart of everything we do. We aim to support and encourage our employees to pursue their interests and provide development opportunities to ensure they have rewarding and fulfilling careers.Working Hours :Monday - Thursday, 8:30am - 5.00pm and Friday, 8:30am - 4.00pm.Skills: Communication skills,Attention to detail,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience,Physical fitness....Read more...
Lead Engineer - FM Service Provider - Data Centre - Wokingham - Up to £54kFantastic opportunity to work for a leading FM Service provider situated in Wokingham. CBW is currently recruiting for a Shift Leader to work on a data centre/government contract located near Wokingham. You will provide an exceptional high standard of building services provision (planned and reactive) within a highly critical environment. You will be responsible for undertaking planned and reactive maintenance works to Electrical, HVAC plant and associated equipment. Due to the sensitivity of the site, you will be required to go through SC clearance. PackageBasic Salary of up to £54,00025 days holiday + Bank HolidaysFull company uniformPDA and Mobile phonePensionLife AssuranceEmployee Shares SchemesReward programme & Employee programmeEmployee discounts.Hours of workMonday to Friday7 am to 4 pmKey duties & ResponsibilitiesSupervise, coordinate and manage the Site Technicians, ensuring that the Operational Team undertake PPM or reactive works in accordance with the agreed timescale, providing technical support and leadership for the site Technicians.Allocate PPM tasks to operations technicians.Operate all systems within the buildings in a competent, effective and efficient manner (including HV operations)Procedures/PTW in advance of these visits.Ensure that Specialist Service Provider (SSP’s) worksheets are signed off where necessary that quality ofwork has been inspected and recommendations are escalated to the Site Management Team.Maintain effective shift handovers including critical plant status, plant isolations, issues arising, ongoingworks, special task requests, and standard of housekeeping.Maintain effective reporting on incidents onsite in line with site process and escalation procedures.Ensure any parts required are clearly and accurately stated and any difficulties encountered on engineering activities are reported to the TSM.Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeepingEnsure the SSP’s comply with the contractual service level agreements (SLA’s).Be prepared to write Safety Switching Programmes if required by management (Once AP authorisation process has been completed)Be prepared to write EOPs/MOPs if required by management once site familiarisation process has been completed.Ensure all record keeping functions are completed on a Daily basis:PPM allocation and completion.Ensure shift handover (through the Shift Change over Log.) is completedBefore leaving site, updating the status of any out-of-hours helpdesk tasks in the appropriate log. Incident reports.Issue of work permits when requiredRequirementsC&G Electrical Level 3 equivalent or exceeds.18th Edition IEE: Wiring and Installation.C&G 2391 test and inspection or equivalent (desirable).LV/HV Authorised Person Experience (Valid Certificate desirable)Strong communication skills and the ability to deal with all levels of staff.Demonstrate a good understanding and be technically competent in all building services, in particular UPS, Generators, Static Switches, Water Treatment, Refrigeration and Air Conditioning.Ability to lead, motivate and direct a team of technicians/operatives.Proactive in achieving the highest standard of operation.If you are interested in this vacancy, please send your CV to Archie Reed of CBW Staffing Solutions.....Read more...
JOB DESCRIPTION
The Process Engineer provides process engineering support for raw materials, compounding, production and packaging functions to improve safety, quality, service and cost efficiencies in the operations area in the Pacific, MO manufacturing plant.
Responsibilities
Support daily production needs through process troubleshooting, experimentation and support for production requirements. Work with project managers on designing and installing PLC controls for capital projects. Work with Allen-Bradley PLC's to maintain and improve current operations. Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation. Implement necessary changes and update all documentation (including drawings and SOP's) accordingly. Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant. Ensure completion of projects within budgets. Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions. Responsible for safety devices, safe design, etc. of all equipment. Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance. Create and maintain P&IDs for current and future processes. Support the implementation of statistical process control by implementation of data collection systems Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements. Troubleshooting machinery, including PLC coding adjustments.
Qualifications
Bachelor's degree in mechanical, Electrical, or Industrial engineering. 0 to 3 years' experience in manufacturing environment. Six Sigma/lean manufacturing experience. Safety and ergonomic experience. Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process. Mechanically inclined with a hands-on approach Previous Capital Project experience Ability to read and interpret process drawings Strong interpersonal skills: good communication skills both written and verbal. Strong Analytical & Troubleshooting skills. PC usage with MS Office Suite Strong AutoCAD skillset. (3D design utilizing Inventor Professional or Solidworks is plus) Experience with PLC's, Allen Bradley is desired.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
Mechanical FitterLocation: Leeds (with European travel)Type: PermanentSalary: £32,000 – £38,000 basic + Overtime (OTE up to £50,000)We are currently working with a long-standing and reputable engineering business based near Micklefield, Leeds, who specialise in the manufacture of bespoke dust containment systems for the pharmaceutical industry. Due to continued growth, they are now looking to recruit an experienced Mechanical Fitter / Commissioning Engineer to join their skilled team.The Role:As a Mechanical Fitter, you’ll be involved in the full lifecycle of mechanical assembly, from build to testing, shipping, and on-site commissioning. Your duties will include:
Mechanical assembly of containment systemsTesting and quality checksDismantling, packing and preparing for dispatchOn-site assembly and installation (UK and across Europe)Final inspection and handover
About You:We’re looking for someone with a solid mechanical or HVAC background who takes pride in their work and thrives in a team environment. The ideal candidate will have:
Previous experience in a mechanical fitting or commissioning roleNVQ Level 3 or equivalent qualifications (preferred)A high standard of workmanship and attention to detailGood communication skills and a proactive attitudeElectrical qualifications – desirable but not essential
What’s in it for you?This is a fantastic opportunity to join a forward-thinking business that values its people and offers genuine career development. You’ll also have the opportunity to travel overseas as part of your role.The package includes:
Basic salary of £32,000 – £38,000Overtime available (OTE up to £50,000)Fully expensed travel and working away allowanceCompany pension schemeBUPA private healthcare (after 12 months' service)Annual bonus scheme
Working Hours: (38 hours per week)
Monday – Thursday: 7:30am – 4:00pmFriday: 7:30am – 1:30pm (no lunch break)
Please note: additional overtime may be required based on project needs.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy. ....Read more...
Assist in the maintenance, repair, and servicing of machinery, equipment, and facilities
Support planned preventative maintenance (PPM) activities to minimise downtime
Learn how to diagnose faults and carry out repairs under supervision
Work with mechanical and electrical systems, developing technical expertise
Assist with breakdowns and troubleshooting to restore operations quickly
Maintain accurate records of work carried out using maintenance logs
Follow health and safety guidelines, ensuring a safe working environment
Work closely with engineers, production teams, and external contractors
Contribute to continuous improvement projects to enhance reliability and efficiency
Attend training courses and complete all necessary assessments as part of the apprenticeship programme
Training:Mechatronics Maintenance Technician Level 3.
As part of the training programme, you will have 1-day where you attend college, and the other working days will be spent with your employer. Training Outcome:
Maintenance Engineer
Maintenance Supervisor
Employer Description:Pentaxia Ltd is a leading UK-based advanced engineering company, specialising in the design and manufacture of high-performance composite tooling and components. Founded in 2008, the company has grown rapidly and now operates from a state-of-the-art 70,000 sq ft facility on a six-acre site on Alfreton Road in Derby, Derbyshire.
Privately owned and family-run, Pentaxia combines cutting-edge technology with a dynamic and supportive working environment. The company serves a wide range of high-tech industries including aerospace, defence, luxury automotive, and motorsport. With a strong focus on innovation, Pentaxia is known for its expertise in 5-axis machining and advanced composite manufacturing, supported by a team of over 140 skilled professionals.
Pentaxia is proud of its collaborative culture, continual investment in people and equipment, and its commitment to delivering high-quality, dependable engineering solutions. Apprentices joining the team will benefit from hands-on experience in a fast-paced, forward-thinking environment that values learning, precision, and teamwork.Working Hours :7.30am - 4.00pm Monday to Thursday, 7.30am - 12.30pm Fridays.
If appropriate, determined by age and experience, may be eligible to complete overtime.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working,Initiative,Patience,Physical fitness,Willingness to learn....Read more...
Lead Electrical Maintenance Engineer - Westminster, London - Up to £45-50,000Are you bored of working in an office?Would you like a role with NO CALL OUT!Are you electrically qualified?Exciting opportunity to work for an established FM Property company based in Westminster, London. I am currently recruiting for a Maintenance Electrician to be based at a large High end property situated by Westminster, London. The successful candidate will be a fully qualified Maintenance Electrician with a proven track record in commercial / property building maintenance. He or she will be required to carry out M&E/Fabric planned and reactive maintenance / Installation across this large static site.Working with the maintenance team on site. He or she will be required to have an understanding/hands on experience of the below. Our client is able to recruit for this position on a straight permanent basis and is also happy to consider electricians who have recently completed their apprenticeships (Must have C&G Level 3 as a minimum). In return the company are offering a competitive salary, further training (Testing & Inspection) overtime and the chance to work at this very unique and interesting site.Lighting (Small installation, Fault-finding, Lamping, Changing ballast, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setHIU Servicing Water Treatment (Temperature checks / Not dosing)Plumbing - Unblocking toiletsBMS System - Monitor (i.e. Hot & Colds)General building fabricHours of workMonday to Friday - 08:00am to 17:00pm (40 hour week)RequirementsElectrically qualified - You must be able to provide copies of your trade certificatesCity & Guilds/NVQ Level 2&3City & Guilds - 17th or 18th EditionA proven track record in commercial or property maintenanceInstallation experienceExcellent customer service skillsHappy to cover a large siteHonest, hard working and reliablePackageUp to £50,000 per annumOvertime available22 days holiday + BHCompany PensionNO CALL OUTPlease send your CV to Dan Barber at CBW Staffing Solutions for more Information!....Read more...
Day Shift Engineer - Client Direct - Critical Banking Environment - London - £50,000 + bonus + AP Training 📍 About the Role: Exciting opportunity to work In House / Client Direct for a very well known financial institution in London. My client is looking for a Day Shift Maintenance Engineer to be based across 2 critical / commercial buildings next to each other in London. The successful candidates will be electrically or mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company is offering a competitive package of £50,000 + 10% bonus + AP Training and £1,500 once training complete. 💼 What’s in it for you?£50,000 + 10% bonus£1,500 HV/LV or Mechanical AP payment1 in 7 call out + 2x hourly rate if called outOvertime available at 2x rate on weekdays and weekends (once AP training complete)HV/LV or Mechanical AP Training within 3-6 monthsPension contribution from employer (candidate does not have to contribute)26 shifts holidayPrivate Health Insurance Dental PlanInterest Free Season Ticket LoanLife insurance 4x salaryA lot of progression available 🕒 Working Hours:Day Shift (10 - 12 hour shifts)3 on, 1 off, 3 on, 3 off, 4 on, 7 off, 4 on, 3 off Later start on Saturdays & Sundays 🔧 Key Responsibilities:Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.Ensure that suitable spares are available to carry out maintenance of the above plant.Ensure that comprehensive maintenance records are completed in the form of job sheets.Ensure that Method Statements and Risk Assessments are prepared, reviewed and utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.Lighting (Small installation, Fault-finding, Lamping, Changing ballast's, Control panel, Power distribution)Emergency lightingAir Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)Chillers - Re-setWater Treatment (Temperature checks / Not dosing)Monitor mechanical plantPumps, motorsBMS System - Monitor (i.e. Hot & Colds)Undertake all allocated tasks and perform them in a timely and professional manner.Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.Be proactive to ensure all H&S issues are reported/escalated as required.Maintain informal communications with Client staff members related to service levels and issues.Report service affecting issued to the site management team for formal communication with the client.Remain flexible with regard to site attendance and tasks undertaken within personal competency.Be fully aware of relevant Health and Safety and general legislative matters.Escort specialist subcontractors ✅ Requirements:Electrically or Mechanically qualified Level 3 / HNC / HNDYou must be able to provide copies of your trade certificates (Essential)Will need to pass security clearance A proven track record in commercial building maintenanceAn understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etcExcellent customer skills Ideally multi skilled Highly desirable (Not essential)High Voltage - Experience / Qualification - Current📩 Ready to Apply? Send your CV to Fin@cbwstaffingsolutions.comOr call 0203 583 3099 and ask for Fin to learn more! ....Read more...
KEY TASKS & RESPONSIBILITIES :
Assist with project-based tasks and general facility management activities as required
Provide support to BEUMER Group Customer Support (CS) colleagues based on-site
Communicate clearly and effectively regarding any engineering issues encountered, and accurately document these within your daily training records
Actively contribute to continuous improvement initiatives, bringing a proactive and solution-focused mindset
Ensure timely and accurate completion of your scheduled apprenticeship training log, linking day-to-day tasks with your learning objectives and providing appropriate supporting evidence
Maintain and update your off-the-job training log in accordance with apprenticeship requirements
As a BEUMER Group UK Ltd employee, you are responsible for maintaining a high standard of health and safety for yourself and others. You are expected to actively support and cooperate with all safety policies and practices to ensure a safe working environment for everyone
Shadow and support experienced engineers in delivering excellent customer service and technical support
Assist in ensuring equipment runs efficiently to avoid any operational disruptions for the customer
Learn and perform a range of electrical and mechanical tasks, including troubleshooting and fault diagnosis in both planned and reactive maintenance settings
Support the completion of Planned Preventive Maintenance (PPM) schedules and associated documentation to a high standard, including stock control processes, under the guidance of the duty engineer
Assist with maintenance and repair activities within a busy, automated airport baggage handling system
Take an active role in maintaining Health & Safety and Quality Assurance standards in all aspects of work
Training:Apprentices will be required to attend college at least x2 day per week either at Uxbridge, Harrow or Hayes Campus completing necessary mandatory training and units associated with the apprenticeship.
The apprentice will be required to complete:
• Work towards gaining a full Qualification.
Employment Rights and Responsibilities
Skills, Knowledge, and Behaviours
Standard and End Point Assessment
Other training will be provided by the employer as required to enable the fulfilment of the job role.Training Outcome:A permanent role maybe be offered upon successful completion of apprenticeship.Employer Description:BEUMER Group is an independent, family-owned enterprise. Originally a supplier to the local cement and mining industries, the company has developed into a market leader in the fields of conveying, loading, palletising, packaging, as well as sortation and distribution systems.Working Hours :4 shifts on, 4 shifts off (Days and Nights).Skills: Communication skills,Attention to detail,Logical,Problem solving skills,IT skills....Read more...
Senior/ Principal Consultant - Renewables Manchester or Glasgow – Hybrid, 3 days a week in-office Salary – up to £75,000 DOE Plus Benefits + Bonus Our client is seeking a Senior or Principal Power Systems Consultant to join their high-performing Connections Team. This dynamic team delivers high-quality, safe solutions across generation technologies, energy storage, industrial facilities, and public and private networks. The successful candidate will be responsible for carrying out power system protection and earthing studies, providing technical advice to clients, and mentoring junior engineers. This position also involves specifying primary plant and protection equipment and representing the organisation at industry events. The Senior or Principal Power Systems Consultant will play a pivotal role in delivering safe and optimised solutions for clients. Working within the Connections Team, the consultant will use their technical expertise and commercial acumen to perform specialist power system studies, ensuring projects are completed to the highest standards. Requirements Essential:BEng/BSc in Power Systems or Electrical Engineering.A minimum of 10 years of experience in the electricity industry, working with generators, network operators, suppliers, ICPs, or consultancies in the UK or abroad.Proven experience in delivering protection studies, with expertise in time-graded overcurrent and differential protection techniques.Comprehensive understanding of protection schemes associated drawings, and the specification of primary and protection equipment.Proficiency in power systems modelling and analysis using tools such as IPSA, PowerFactory, PSSe, SKM, ETAP, PSCAD, or CDEGs.Strong commercial awareness with the ability to deliver high-quality technical reports on time and within budget.Excellent written and verbal communication skills, with proficiency in MS Office tools.A proactive, detail-oriented, and solutions-driven approach with a professional work ethic. Desirable:Chartered Engineer (CEng) status or working towards it.Previous experience in a consultancy environment, including business development, bid proposals, and client-facing activities.Experience in delivering earthing and arc flash studies.Knowledge of UK Grid and Distribution codes, ENA Engineering Recommendations (e.g., G99), and industry standards. If you are interested in finding out more information about this Senior/ Principal Consultant role in Manchester or Glasgow, get in touch. About Us Climate17 is a purpose-led, international Renewable Energy & Sustainability recruitment firm. We provide specialist talent acquisition services to organisations seeking to reduce their environmental footprint, as well as those working towards the decarbonisation of the energy sector. Inclusive Application Process Climate17 is committed to creating a diverse, inclusive, and equitable workplace. We believe there is no solution to climate change without people. We aim to increase diversity across all areas and as such, we are committed to partnering with clients and candidates to create an inclusive and sustainable regenerative world.....Read more...
We’re looking for a Engineering Service Manager to lead and support a high performing field-based engineering team for a globally respected brand known for quality, innovation, and customer commitment.
This is a key role in delivering operational excellence, driving team performance, and ensuring customers receive a world-class service across industrial and municipal cleaning equipment
The Role of Engineer Service Manager
You’ll be responsible for the day to day leadership and development of a regional team of Service Engineers, working closely with internal teams and customers to deliver service excellence. While a strong technical background is essential, this is a leadership and operations-focused role ideal for someone with field service experience ready to step up or already managing a regional team.
Location Requirements
To ensure efficient team coverage, candidates must be based within the M25 ideally near key areas such as Hammersmith, Stratford, or central/south London with good access to wider South East routes
Key Responsibilities
Lead, coach and develop a team of Field Service Engineers
Oversee team performance, productivity, and service KPIs
Ensure adherence to health & safety standards and company procedures
Provide operational support – including fleet, stock, tooling, training and leave planning
Conduct regular performance reviews, training plans and wellbeing check-ins
Support engineers with complex technical issues and customer queries
Maintain strong customer relationships through regular site visits and reviews
Manage team budgets, regional spend, and operational efficiencies
Collaborate closely with scheduling, logistics, and the wider service leadership team
Report monthly on regional performance to the UK Service Manager
What We’re Looking For
Proven experience in a field based engineering role
Strong background in electrical, mechanical, hydraulics, pneumatics, and diesel-powered equipment
Experience working with industrial or municipal machinery, FLT, plant, or HGVs is highly beneficial
Ability to lead by example, drive engagement, and get the best from your team
Organised, proactive, and confident handling performance and operational matters
Full UK driving licence and flexibility to travel across the region
Comfortable using CRM and systems, reporting tools
What’s in it for You
Training & Development
This role comes with industry-leading training and support, including a detailed 12-week technical onboarding programme.
Ongoing learning and technical development to support your growth in the role
You’ll be fully supported throughout, with clear guidance, mentoring, and the tools you need to succeed from day one.
A starting salary: £44,000 plus+ London weighting if applicable OTE c£50,000
Company profit share + individual performance bonus (up to £7,500)
Fully expensed vehicle (private use optional)
Private medical insurance
26 days holiday + 8 bank holidays
Pension scheme, critical illness cover, sick pay, and staff discounts
....Read more...
Our apprenticeship programme combines college-based training with work-based learning, under the mentorship of our highly skilled engineering team. From September 2025, the first four weeks of your apprenticeship will consist of intensive training at The Grimsby Institute, Nuns Corner, DN34 5BQ. You will then work three days per week at Polypipe, Holmes Way, Horncastle, LN9 6JW, and return to The Grimsby Institute for two full days each week. In Year 2, you will attend college one day per week, spending the majority of your time at our Horncastle site, learning and being mentored by our team of experts. Supported by your training and our team, your tasks will include:
Mechanical and electrical maintenance, installation, fault-finding and repair
Reading and interpreting engineering drawings
Learning pneumatic and hydraulic systems
Working with programmable logic controllers (PLCs)
Responding to production machinery breakdowns
Assisting with the completion of maintenance documents/worksheets
Supporting engineering projects and improvement works
Servicing and maintaining machinery - TPM/PPM
Providing support to all departments across the site
Contributing to new working methods and participating in continuous improvement projects
Carrying out any other associated duties as required
Training:
Our apprenticeship programme combines college-based training, with work-based learning, under the mentorship of our highly skilled engineering team
From September 2025, the first 4 weeks of your apprenticeship will cover intensive training at The Grimsby Institute, Nuns Corner, DN34 5BQ. You will then work 3 days per week from Polypipe, Holmes Way, Horncastle, LN9 6JW, and return to The Grimsby Institute for 2 full days each week
In year 2, you will only attend college for 1 day each week, spending the majority of your time at our Horncastle site, learning and being mentored by our team of experts
You will complete a mixture of on and off the job training, including workshops, face to face training and working towards creating a portfolio of relevant practical evidence
You will have a review every 8-12 weeks with your Manager and Trainer to discuss your progress
Training Outcome:
The Polypipe Apprentice Programme provides a fantastic opportunity for apprentices to build a strong foundation of capability that will lead to a permanent job role, and possible internal progression
Employer Description:Polypipe Civils and Green Urbanisation is a UK leader in the design, development and manufacture of thermoplastic piping systems for major infrastructure and water management projects. From our dedicated site in Horncastle, we support a wide range of sectors including highways, rail, water, residential, commercial and agriculture.
We specialise in sustainable, engineered drainage and water management solutions, with in-house fabrication facilities and a skilled team delivering bespoke systems to meet the evolving needs of the built environment. Our expert teams work with advanced materials and innovative technologies to drive efficient, long-lasting solutions across the UK’s infrastructure network.
As an apprentice maintenance engineer, you’ll play a key role in supporting the equipment and systems that underpin our high-quality manufacturing processes.Working Hours :Monday - Friday, 08:00 - 16:30, whilst in apprenticeship training.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Positive 'can-do' attitude,Not afraid to ask questions,Highly driven individual,Self-starter....Read more...
What you’ll do at work?
More than a billion people worldwide rely daily on Knorr-Bremse systems. Knorr-Bremse is the world’s leading manufacturer of braking systems for rail and commercial vehicles.
As a technology pioneer, for over 100 years Knorr-Bremse has been a driving force in the development, production and sale of modern braking systems for a variety of applications in the area of rail and commercial vehicles.
This well respected and innovative company will allow you to develop and grow throughout your apprenticeship to develop into the type of engineer that you want to be within their manufacturing departments.
What will the apprentice be doing?
Your first year will be based at our training provider Make UK completing a range of modules across disciplines such as assembly, mechanical and electrical/electronics engineering. During your first year you will be at Make UK in Birmingham undertaking your studies
This will involve staying a hotel, linked to Make UK with other residential students, fully funded by Knorr Bremse, between Sunday evening and Friday morning. You will finish your studied weekly at 12.30pm on Friday to enable you to have time to get home
Your travel to and from the hotel is also funded by the company. The only thing you may need to pay for is your lunch at Make UK’s subsidised cafeteria
Year 2 onwards will be based primarily at our Melksham site and will include:
General assembly of products to the required specification
Testing of products to the appropriate testing standards
Reviewing and interpreting engineering drawings
Manufacturing of parts according to requirement
The career path you choose will depend on what you enjoy doing and working with your mentor you will discuss where you will use your skills to fit into a choice of a variety of departments.Training:Together with invaluable commercial and practical experience, you’ll work towards several academic and vocational qualification levels throughout your time with us, which are fully paid for, including:
Advanced Manufacturing Engineering Foundation Competence - in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Development Competence - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering Development Knowledge - in Years 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering Technician.Training Outcome:
Your future is in your hands
You will work with your mentor to work out the best career path for you within the manufacturing teams and KB will support you in your studies and in your job path
The company will also encourage you to complete a HNC (1st year of a degree programme) during your apprenticeship and will champion further learning as required by your career choice
Employer Description:More than a billion people worldwide rely daily on Knorr-Bremse systems. Knorr-Bremse is the world’s leading manufacturer of braking systems for rail and commercial vehicles. As a technology pioneer, for over 100 years Knorr-Bremse has been a driving force in the development, production and sale of modern braking systems for a variety of applications in the area of rail and commercial vehicles. Knorr-Bremse is growing….grow with us! Knorr-Bremse Connected Systems and genuine parts and support is available from our Melksham headquarters and Knorr-Bremse Corsham carries out precision machining in support of manufacturing at Melksham. Knorr-Bremse offers a unique state of the art facility including departments such as; Engineering, Manufacturing, R&D, Innovation, Quality, Operations, Electronics, Technical Support, IT, Finance and Customer Services.Working Hours :Year 1 - Residential at Make UK. Monday 10:00 - 18:30, Tuesday - Thursday 08:00 - 16:30, Friday 08:00 - 12:30
Year 2+ Monday - Thursday, 07:30 - 16:00 & Friday, 07:30 - 12:30Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
