Non-destructive testing (NDT) is an engineering science-based profession that requires competent Engineering Technicians to inspect materials, welds, components and plant to verify their integrity without rendering them unfit for further service. NDT is a useful background to many Asset Integrity Engineers and In-Service Inspectors for pressure and other systems.
Roles and responsibilities;
Plan and coordinate non-destructive technology (NDT) work to meet stakeholders’ requirements.
Test equipment, identifying faults and taking action as needed.
Establish resources required to ensure customer and site compliance against defined acceptance criteria. For example, accept all cracks to a certain length, and in a particular position, then report other findings in a technical report.
Receive, read, and interpret engineering data and documentation.
Assess the condition of the asset, component or material for compliance with stakeholders’ requirements acceptance criteria. Identify and fix issues with the asset, component or material, re-testing as needed. Report any defects and irregularities.
Collect NDT samples, record measurement points, monitoring intervals and operational state.
Conduct NDT testing and checks using testing, measuring or monitoring equipment on materials and components.
Inform stakeholders of work status and results. For example, internal and external customers.
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.Training Outcome:On completion of the apprenticeship, successful candidates could secure a role in a successful, dynamic company. The natural route to progression is one of a mechanical Statutory Inspector and/or an Asset Integrity Engineer.Employer Description:Tronox is the largest vertically integrated titanium dioxide producer in the world, the largest producer of merchant titanium chemicals, and the leading manufacturer of specialty titanium products. Tronox provides numerous products and services for a variety of industries around the world. From coatings to paper and polymers to pigments, our products and services are used to improve everyday life. Thousands of products in our world, from plastic bags to aerospace parts, get their start with help from Tronox. Tronox employ nearly 6,500 across six continents, and have a rich diversity, unmatched vertical integration model, and unparalleled operational and technical expertise across the value chain, position Tronox as the preeminent titanium dioxide producer in the world. We’re committed to our people, our customers, and our communities. With a broad global reach and deep local roots, Tronox embrace and celebrate the unique character and culture of every place they call home. From the west coast of Australia to the east coast of the U.S., from Europe to South Africa, and from mines to research and development labs, they bring the same passion to work in every location, everywhere, every day.Working Hours :Monday - Friday, 8.00am - 4.00pm (30 mins unpaid lunch).
Initially based at HETA and then on site.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Punctual....Read more...
Your day as an apprentice:
As an Aggreko apprentice, no two days are the same. Each day begins with a team briefing focused on safety and priorities. You’ll then work closely with a senior events engineer on a wide range of tasks onsite at our customers events – from equipment testing and preparation to electrical servicing and fault diagnosis. Throughout, you’ll build practical skills with hands-on support and guidance, always working safely to keep everyone safe.
What you’ll learn and do:
Assist with installation and commissioning across multiple electrical disciplines: containment systems, wiring, termination, and commissioning.
Work alongside our events specialists to ensure safety and accurate documentation at venues.
Develop your knowledge and confidence using a range of hand tools
Work safely to keep everyone safe
Collaborate with teams to deliver excellent service and contribute to key events
Use IT tools like laptops and mobile devices to support your work
Balance practical work experience with college study towards a Level 3 Electrical Installation Maintenance Technician qualification
Training:You will follow a four-year apprenticeship programme completing a Level 3 Installation and maintenance electrician qualification. College training will be delivered 1 day per week.Training Outcome:Completing your apprenticeship opens the door to a range of exciting opportunities. Stay local. Work across the UK. Explore opportunities further afield. The choice is yours and Aggreko is here to support your growth and help you shape a career that matches your goals. Employer Description:At Aggreko, we are in the business of ‘on’.
Power without pause. Heating, cooling and oil-free air without end. We keep our customers’ worlds on. From world-class events that last a few weeks to mining operations and remote communities who rely on us for decades.Working Hours :Monday - Friday, may work evenings and weekends. Times to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Electrical Engineer - Edinburgh - Salary up to £39,000 DOE CBW have a new opportunity to join a leading facilities company on a permanent basis covering a large static site based in Edinburgh. The successful candidate will be required to complete PPM's and Reactive based works and assisting with other building fabric works. Hours of Work:Rotating Shift PattermDayshift - 06:00 to 14:00Backshift - 14:00 to 22:00Nightshift - 22:00 to 06:00Key Responsibilities:Responsibility for electrical PPM, proactive and reactive works issued through the helpdesk within set time frames so that the customer expectations are exceeded.Responsibility for other types of building services maintenance to include basic fabric, HVAC, mechanical and related tasks.To provide callout response for the client as detailed on the callout rota.To undertake contractor control duties on behalf of the client, including monitoring of contractors and their workmanship, so that relevant standards are met. Issue of Permits to WorkAll Planned Maintenance and Reactive tasks to be carried out to the highest standards and delivered within the requirements of the Service Level Agreements.Active involvement in day-to-day operation of the building services plant and equipment.Effective fault finding on building services plant and equipment.Carry out / assist in all minor new works including system installations and refurbishments as required.Coordination of sub-contractor activities.Person Specification:Electrically qualified - City & Guilds Level 2&3City & Guilds - 18th EditionCOSSH, IOSH, People Management (Desirable)Must be able to provide copies of your trade certificatesA proven track record in commercial building maintenanceGood communication skillsClient Facing Salary & Benefits:Salary up to £39,000 On call one weekend in 8Call out – min 8hour paid at 1.5£100 Standby25 days holiday + Bank HolidaysCompany Pension SchemeExcellent career progression opportunities....Read more...
As an Apprentice Fabricator/Welder, you'll be initially responsible for (but not limited to) the following:
Carry out fabrication and welding activities including use of a MIG/TIG/stick set, Profile Burner and other ancillary machinery and equipment
Accurately interpret technical drawings
Ensure correct marking up of component parts
Working to quality standards required for the components
Weld joints in accordance with approved welding procedures and quality requirements (TIG, MIG)
Use a variety of manual equipment to shape, form and cut metal
Undertake final inspections of finished components
Maintaining a clean, organised and productive work area for colleagues and yourself
When trained, ensure job timings are met/exceeded
You’ll develop your skills alongside experienced engineers who are eager to pass on their knowledge, helping you learn a variety of duties and how to support the whole business. You’ll be mentored to achieve your full potential and create the foundation of a career in engineering.
If you are committed and ready to take your first step into a career with a family business, then please apply now! This apprenticeship and opportunity with Kast will be highly competitive, so don’t miss your chance!Training:
The successful candidates will continue their studies with apprenticeship specialists, RNN Group at one of their college campuses on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer
The Apprenticeship Standard you will be studying is Metal Fabricator - Level 3
Training Outcome:
Further industry appropriate training
A lifelong career in the engineering industry with Kast Fabrications Ltd
Employer Description:Kast Fabrications Ltd is a family-run business that specialises in providing Fabrication and Welding services to South Yorkshire and across the UK. The business was established in 2003 and has maintained loyal customers due to their excellent customer service, expertise and industry knowledge.
Their well-equipped facility allows them to manufacture projects of all sizes and they’re also EN 1090 EXC 2 approved. Kast undertakes all types of fabrications, machine repairs and structural work, utilising their onsite machine shop when required.Working Hours :Monday - Thursday, 07:00 - 16:30 and Friday, 07:00 - 13:30Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Analytical skills,Logical,Team working,Initiative,Ability to prioritise workload,Good attitude to work....Read more...
At Thatcham Research, we’re looking for an enthusiastic and motivated IT Apprentice to join our friendly IT Services team. You’ll work alongside experienced professionals who will support your development every step of the way, helping you build the technical skills and confidence needed for a successful career in IT. You’ll work towards the ICT Apprenticeship Level 3, which typically takes 18-24 months to achieve.
What you'll be doing:
You’ll play a key role in keeping our people connected and our technology running smoothly. During your apprenticeship, you’ll learn how to:
Set up and maintain IT hardware, software, mobile devices and user accounts
Provide first‑ and second‑line support, helping colleagues troubleshoot issues in person, remotely or via our service desk
Monitor system performance, support security processes and help manage our IT asset register
Create useful documentation and knowledge base articles
Develop strong customer service and communication skills as you assist users at all levels of the business
Understand cybersecurity fundamentals and follow best‑practice standards
You’ll be supported by your line manager, mentors, and the wider IT Services team — including specialists in cloud, security and IT transformation.Training:Skills & experience you might have:
You don’t need previous IT work experience - just a passion for technology and a willingness to learn. You’ll thrive if you have:
An interest in IT fundamentals (hardware, software, networks, operating systems)
Problem‑solving skills and a logical approachConfidence communicating with both technical and non‑technical people
A positive attitude and desire to grow your skills
GCSEs in English and maths (Grade 4/C or above) or equivalent (desired but not essential)
We’ll help you build essential technical skills throughout your apprenticeship, including troubleshooting, system administration, Microsoft 365, Active Directory, Azure, Intune and more.Training Outcome:IT Services Engineer.Employer Description:At the cutting edge of automotive research in the UK, Thatcham Research has a unique role in shaping the design of new vehicles and influencing ever higher standards of safety, security and repair. With an on-site Crash Laboratory, Repair Technology Centre and Training Academy, our research expertise is driving some of the very latest automotive developments in technology, materials and standards in this fast moving and highly technical industry.Working Hours :Our standard working hours are 8:30 - 16:30 Monday - Thursday, early finish on Friday - 8:30 - 15:45.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Analytical skills,Team working,Initiative....Read more...
Mobile Service Engineer Reports to: MSE Team LeaderLeeds Service CentreSalery: £26,104.00 (40 hours per week @ £12.55ph).Working Pattern: Monday to Friday 08:00 to 16:30.Holiday entitlement: 25 days plus Bank Holidays (January to December).Job purpose:To enable the Company to achieve the agreed contractual standard of service required by completing initial training in the workshop reconditioning wheelchairs to gain essential product knowledge. On completion of initial training this will enable you to work out in the field delivering, collecting, repairing and servicing wheelchairs. The expectation is that once fully trained the majority of jobs will be completed on a first-time fix basis. Initially the workload will consist of manual wheelchairs but as more experience is gained and with further workshop training electric wheelchairs will also be included into your work schedule.Key Responsibilities:
Delivering and collecting wheelchairs to and from service user’s homes and NHS departments, always ensuring that the Company Infection Control Policy is followed.Servicing and repairing wheelchairs in the field with the aim of achieving a first time fix whenever possible.Ensure all paperwork relating to each job is read carefully and completed with all the necessary information regarding parts used and action taken written onto the job card to enable the administration team to accurately update the data base.Ensure any PPE supplied for use in carrying out your duties is used as instructed.Observe all regulations covering the driving and use of the Company vehicle on the public highway and be aware of employee responsibility under the Health & Safety at Work Act.Keep the vehicle you use in a tidy state and ensure stocks of all necessary parts are replenished each day.Ensure the vehicle safety check and van check sheet completed each week.Maintain a professional customer service attitude and always use discretion when dealing with all service users and other agencies, always wear your uniform and identification badge, and ensure the uniform is kept clean and always laundered.Prioritise and organise your workload, referring to Line Manager as and when appropriate.Be responsible for the maintenance and safe keeping of all tools and equipment provided by the Company as outlined in the Company handbook.Agree to undertake all training offered that is necessary to maintain the skills required for this role.Willing to take on additional supervisory responsibilities and training if required.
Skills and Qualifications
Full UK driving licenceSuccessful enhanced DBS checkGeneral workshop knowledgeBasic mechanical knowledgeBasic electrical knowledge including 12v/24v D.C. systems.Able to move and handle loads and equipment safely.Experience of face-to-face customer contact.Previous delivery driver experienceAn awareness and understanding of people with disabilities.10. Flexible approach to working conditions and working environment change.Ability to use own initiative within set boundaries of the role.Ability to use a mobile phone to relay photographs.Good written and verbal communication skills.Ability to relay clear instructions to clients.Previous supervisory experience preferred.
Physical demands of the job
Moving and handling of equipment and accessories following handling guidelinesStanding at a bench to workKneeling/crouchingWorking in confined workspace if the job necessitates (installing/repairing equipment in small areas).Use of ramps and any other agreed moving equipment.
Most challenging/difficult part of the role:
Flexible working/responsive to changing priorities as set by Line Manager or Customer Service team.Committing to being available for short notice overtime necessitated by emergency response requirements.Responsibility of out of hour’s duties.
Health and SafetyThe post holder is required to take reasonable care for his/her own health and safety and that of other persons who may be affected by his/her acts or omissions. The post holder is also required to co-operate with supervisory and managerial staff to ensure that all relevant statutory regulations, policies, codes of practise and departmental safety procedures are adhered to, and to attend relevant training programmes.Prevention and Control of infection:The prevention and control of infection is an integral part of the role of all Ross Care personnel. Staff members will contribute to the prevention and control of infection through standard infection control practises and compliance with the Company infection control policy and use of PPE.Service user/other agency/public engagement and involvement:Ross Care is committed to promoting and embedding equality, diversity and inclusiveness and expects that the post holder will actively promote and engage this commitment in all that they do. The post holder should ensure that in all their behaviours, attitudes and working they recognise and take account of the health needs and rights of all sections of the community including ethnicity, disability, gender, age, sexual orientation and religion/belief. The post holder will be expected to engage the service users, other agencies and the public where relevant and adhere to the Company’s policies and procedures governing zero tolerance to discrimination, harassment, bullying, stereotyping and prejudicial treatment. INDHS Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
Hands-on experience working within New Build homes learning:
Plumbing, Heating, Renewable Energy
General plumbing repairs & maintenance
Central heating servicing & installation
Boiler servicing & installation
Bathrooms & kitchen installation
Assist skilled plumbers in various plumbing tasks learning from their experience
Planning, selecting, sizing, preparatory work, installation, testing and commissioning, fault finding, diagnostics, rectification, routine service and maintenance, decommission etc.
Select the required materials to carry out the work
Precision measuring, marking, cutting, and installing components
Learn the process of understanding and interpreting technical drawings and work in accordance with specifications
Take measurements and calculate the size and amount of material needed
Plan and carry out work to the required standards of quality and speed
Use of hand tools, portable power tools and equipment
Work safely and be aware of key health, safety, and welfare issues. Follow health & safety policy and procedures for using various tools, equipment and materials including the wearing of personal protective equipment (PPE) where needed
Maintain a clean and organised work environment
Move, handle and store resources, such as materials complying with relevant legislation & guidanceInterpret and follow verbal and written work instructions from trade supervisors and managers
Uphold high standards of craftsmanship and attention to detail
May be asked to assist in other areas of the site (i.e. cleaning and general labouring)
Opportunities to watch other trades. This is beneficial to learn the sequence of work on building projects
Training:Plumbing and Domestic Heating Technician Level 3 Apprenticeship Standard:
Apprentices will Train in the workplace and attend college 1 day per week
College will depend on location
We are looking to recruit in Newbury, Basingstoke, Andover, Aylesbury, Witney Maidenhead and Slough
Please do not apply if you don’t live in these areas
Training Outcome:
Senior plumber position & gas engineer
Site supervisor
Site manager
Project Manager
Employer Description:We are a large company that carries out Plumbing work on New Build properties for builders such as Berkley, Taylor Wimpey, Bellways and Pye Homes. We also have a maintenance and servicing team and Apprentices will spend some time working with both departments.Working Hours :8 Hours per day, Start time is dependant on site, but usually 7.30am. 1 Hour lunch Break. Finish time and days to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
I am searching for an experienced Production Engineer for an internationally respected and very successful manufacturing business based near to Exeter.
Reporting to the Lean Engineering Manager, you will be responsible for supporting production throughout the in-house metal shop and assembly areas alongside the external supply chain.
The role is focussing on the support of existing product ranges and the introduction of new products. You will help to development supporting systems to improve quality and sustainability of our client’s product range. The role will include the definition and delivery of strategic targets across the business.
Working within the Production Engineering and Lean Team, you will ensure successful identification and implementation of best manufacturing practise. You will help review the suitability for manufacture of new products and maintain quality that exceeds customer expectation.
Duties include:
Identify and present ideas for improving production in order to improve profitability, quality, throughput and H&S.
Conduct feasibility studies on continuous improvement ideas generated from within Production, gained sign off and implement those projects.
Work closely with the Lean team to develop and implement best practices, routines and solutions to improve production rates, quality and output.
Support the Production Team in evaluating the strategic development of on-site manufacturing to achieve business goals.
Assist in the production of operating instructions.
Assist in the coordination and management of new products internally and externally to support the manufacturing team where required.
Produce written reports where required.
You will undertake continuous training and development.
Ensure adherence in accordance with any health, safety and environmental policies and procedures to ensure the safety and wellbeing of staff and visitors.
Participate in new product reviews to ensure that only the most production efficient designs are released into production.
Participate in Change Request reviews to ensure that the best and most cost-efficient solutions are adopted without having a negative impact on safety or quality standards.
Develop and maintain strong relationships with internal stakeholders to ensure optimal performance.
Work as part of the production engineering team to share ideas and improve operation, recommending, supporting, and implementing continuous improvement activities and process and procedure improvements to optimise results and improve quality of delivery, in line with quality standards requirements.
Stay current and up to date on any technology changes that may affect manufacturing and advise of any impact.
Liaise and communicate with other departments, suppliers, and other service providers as and when required.
Required skills and attributes:
Excellent people skills.
Ability to manage a variety of cross-functional team members.
Excellent written and verbal skills.
Excellent organizational and follow-up skills.
Competent in problem solving, planning and decision making.
Commercially and financially aware.
Qualifications and experience:
HNC or HND or equivalent in an engineering discipline, as a minimum.
Experience of implementing manufacturing improvements and continuous improvement projects within batch manufacturing businesses.
Experience of working with sheet metal fabrication with an understanding of related manufacturing processes and limitations.
Experience of quality management including proven use of DFMEA & PFMEA.
Project management experience and a track record of identifying and successfully implementing change.
Previous involvement in new product introductions would be beneficial.
Experience of Value Analysis and Value Engineering techniques, Root Cause Analysis, Value Stream Mapping and 8D would be beneficial but is NOT a prerequisite.
The role comes with an excellent benefits package and once probation has been successfully completed some home-based working is available with prior consent with management.
The benefits include, 32 days holiday (including bank holidays), flexitime, competitive salary, pension, loyalty bonus, life assurance, free eye tests, training, rewards hub, hybrid-working and much more!
To be considered for this role you MUST have the Right to Work in the UK long-term without company sponsorship. You will also need to be based near to Exeter / East Devon, or you will be able to relocate to the area. Our client will 100% consider candidates who wish to relocate from within the UK to take up the position.
KEYWORDSProduction Engineer, Lean, New Products, H&S, Continuous Improvement, Production, Manufacturing, Engineering, DFMEA, PFMEA, HNC, HND, Batch Manufacturing, Sheet Metal Fabrication, Value Analysis, Value Engineering, Root Cause Analysis, Value Stream Mapping, 8D
Please note that due to a high level of applications, we can only respond to applicants whose skills and qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.
Bowerford Associates Ltd is acting as an Employment Agency in relation to this vacancy.....Read more...
