We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer.
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
We are looking for a self-motivated, enthusiastic individual with the desire to work in our business long term as a qualified Catering Service Engineer. Aimed at either new entrants wanting to access the Catering Industry or those with some knowledge and experience who want to build their career as a fully trained Gas Engineer. ;
What will you be doing?
Working towards the Commercial Catering Equipment Technician, Level 3 Apprenticeship
The broad purpose of the occupation is to install, commission, maintain and repair commercial catering equipment, such as combination ovens, fryers, grills and griddles, cooking ranges, dishwashers, microwave ovens etc. Equipment may be gas or electrical and may involve plumbing and electronic controls.
Throughout the duration of the programme, you will be working to acquire the necessary knowledge, skills and qualifications to perform the following duties:
Conduct servicing of commercial catering equipment in line with manufacturers’ specifications and/or legislation
Undertake fault finding and repairs of commercial catering equipment, for example replacing thermostat or pumps; including use of diagnostic equipment
Install and commission a wide range of commercial catering equipment, for example ovens, grills, fryers, dishwashers, water treatment equipment and ancillary equipment e.g., fly killers, water filtration, preparation equipment
Test and undertake quality assurance checks to verify that the commercial catering equipment is working in accordance with its design specification and current regulations including air quality tests
Decommission and remove redundant catering equipment and leave the overall installation in a safe condition
Safely isolate and lock-off of services (gas, water, electricity); for example, cap off gas supplies to prevent possible escape of gas
Plan work schedule and logistics to meet customers’ requirements and priorities, time management
Interpret specifications, drawings and technical information, for example manuals
Conduct or agree risk assessments and apply method statements to maintain safe working environment
Provide information and guidance to end-users on the correct operation and maintenance of commercial catering equipment
Complete documentation (written or digital) associated with the specified job for example, time sheets, maintenance records, written acceptance of work completed, commissioning sheets
Maintain tools, equipment and Personal Protective Equipment (PPE), including ensuring meters (typically Electric Multi Meter, Ohmmeter, Carbon Dioxide/Monoxide Meter, Flue Gas Analyser – this list is not exhaustive) are in calibrated date
Maintain and safely store stock – consumables and spares
Strong communication with the customer
Report on work completed to office/manager
Training:Successful apprentices will achieve a Level 3 qualification in Gas Engineering (Commercial Catering Equipment Technician) and relevant commercial ACS qualifications.Training Outcome:Successful apprentices will become fully qualified and, depending on performance and availability, progress into full-time Commercial Catering Equipment TechnicianEmployer Description:Advance Group is a leading ‘design house’ within the commercial kitchen sector. Established in 1981 we have become one of the UK’s most recognised brands within the market. We are lucky enough to work with some fantastic market leading customers.Working Hours :Monday - Friday (9:00am - 5:30pm)
Shifts TBCSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Initiative,Motivated,Willingness to learn,Passion for Engineering....Read more...
Whatever you’re planning, building, or maintaining, we believe understanding the earth is key. At Fugro, we unlock its secrets in the form of Geo-data, which we apply to develop safer, more sustainable, and more efficient operations.
From our Falmouth Hub we provide world leading Overwater and Seabed drilling solutions that enable a comprehensive range of survey services for the Marine Renewables sector. This support continues with the installation and maintenance of seabed foundations and marine construction support provided by the company’s Marine Infrastructure Solutions unit, offering seabed shaft drilling services in diameters up to 10m. Supporting the operational business is one of the largest Engineering teams in the Southwest providing full lifecycle support from the design and construction phase through to equipment maintenance and decommissioning.
The offshore renewables sector is growing fast, and we are looking for proactive and practical minds to join this exciting journey as we help create a safe and liveable world.
The role:
Fugro’s engineering team are involved in many exciting and innovative global projects within offshore renewables. As a Senior Design Engineer, you will cover all aspects of the design, production and operation of seabed drilling and subsea installations tools whilst mentoring and developing junior members of the engineering team.
Specialising in Structural, Mechanical or Controls, as a successful applicant you will possess strong innovation skills and experience of creating solutions and managing the life cycle of equipment. You will deliver differentiation through technology in our products and services; apply innovation to aid our clients with achieving their projects; work to ensure engineering is produced to our high standards and continuously improving our processes.
This is an exciting and broad role where you will be involved in a wide range of engineering activities from conceptual design to machine commissioning, site trials, project engineering and supplier/customer visits.
Who we’re looking for:
This role is ideal for an experienced Engineer from a Renewables, Marine or Heavy Industrial background looking for the next step in their career with a diverse, supportive, and friendly team.
You should have demonstrable experience of the full project lifecycle, including the development of specifications, budgets and programs. conceptual design, engineering calculations and analysis.
We are particularly interested in candidates with experience of Hydraulic system design or who have performed the role of Team lead / Lead engineer for the development of low-volume, high-value machinery.
What we offer:
Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So, bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.
Extensive career & training opportunities both nationally and internationally.
Competitive salary accompanied by an attractive package including contributory pension scheme & Life Assurance
Hybrid working with the potential to work 2 days a week from home.
Site Allowances
Option to lease an electric car.
Private Medical Insurance
Cycle to work Scheme.
Discounted gym membership
Our view on diversity, equity and inclusion
At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together we create a safe and liveable world’ – and to each other.Apply for this ad Online!....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted off site
Fault-finding and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre amongst our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On successful completion of the apprenticeship, you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday–Friday from 8am to 5pm. In years 2-4 you will likely be working a Monday to Friday day shift pattern. However, there may be the requirement to work some night and weekend shifts. Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control Systems Engineer (degree) Level 6 Apprenticeship Standard:
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team
Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control Technical Support Engineer Level 6.
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship, you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern, however there may be the requirement to work some night and weekend shifts.
Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer (degree)
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.
Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control Technical Support Engineer Level 6.
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship, you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship, you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, while in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.
Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.
Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts to be confirmed.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
You will build your skills over a 48-month period - starting in September 2024 including:
Classroom training and workshops hosted offsite
Fault find and repair automation systems
Optimise automation systems
Programme automation systems using PLC's
Training:Control technical support engineer
Year 1 is full-time residential (classroom) training at one of our training provider facilities. As a result, you may be required to work away from home Monday to Friday each week during term time (costs will be supported by Amazon), combined with short periods working at one of our operations warehouses. This will give you a thorough and detailed insight into the work of the RME team, as well as the basic skills necessary before working autonomously on our site equipment.
Years 2 and 3 will comprise block release training at one of our training provider facilities where you will study for a Foundation Degree in controls engineering, and on-the-job training in a Fulfilment Centre among our team of technicians and engineers.
In year 4, you will complete a substantial work-based project and attend university on block release to achieve your full degree qualification (which will be awarded along with the apprenticeship certificate on completion of the End Point Assessment for the apprenticeship).
Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Training Outcome:Not only will you receive invaluable learning, development and professional experience, but you will also gain a number of externally recognised qualifications and your bachelor’s degree.
On completion successful completion of the apprenticeship you will be eligible to apply for Automation Engineering roles within the RME team.Employer Description:Amazon offers a range of opportunities to suit candidates with different backgrounds, qualifications and career aspirations. That is why we believe it is the perfect place to learn new skills. We believe that building a culture that is welcoming and inclusive is integral to people doing their best work and is essential to what we can achieve as a company. We take steps to ensure our colleagues have a sense of belonging, value, and opportunity.Working Hours :In year 1 you will work Monday - Friday from 8am to 5pm, in years 2-4 you will likely be working a Monday to Friday day shift pattern however there may be the requirement to work some night and weekend shifts.
Shifts TBC.Skills: Communication skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
Through a rotation of placements, you will also have the opportunity to learn about other areas of Technology Enablement and the business, putting our security requirements into context. To support your learning and development and to compliment your studies, you will work with our experienced teams who will mentor and coach you whilst working on real life tasks.
Within the Submarines business, we have three Technology Enablement Security Teams:
Cyber Security Architecture & Services
Information Security
Supplier Security Assurance
A lot of the work that these teams undertake involves supporting incident and vulnerability management, security breach investigation, strengthening and enhancing how we protect our information and IT infrastructure, increasing security awareness and ensuring that internal and external colleagues comply with our policies and our security requirements
Gain an insight into the development, definition, management and delivery of Cyber Incident Response – including documentation and testing
Develop an understanding of the security architecture across all IT infrastructure, networks, systems and applications – both in projects and ad-hoc
Understand the importance of Information Security and applies this to their own work and operations within the organisation
Communicate security risks and issues to business managers and others and then applies and maintains specific security controls as required by organisational policy and local risk assessments
Support incident/ issue and vulnerability management. Support the investigation of minor security breaches in accordance with established procedures
Assist users in defining their access rights and privileges. Perform non-standard security administration tasks and resolves security administration issues
Provide advice and guidance to business stakeholders on security best practice and application of Security policies and processes in order to ensure compliance and/or risk management facilitating delivery of business objectives in line with contractual obligations and corporate standards
Gather data, analyse and prepare reports or presentations to feed information back to teams/managers
Conduct and support security risk assessments and facilitates remedial activities to improve security performance
Training:
Cyber Security Technician Level 3 Apprenticeship Standard
At least 20% of your working hours will be spent training or studying
Training Outcome:
Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities – whether you decide to stay in the UK, or explore an overseas role
Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmedSkills: Communication skills,Organisation skills,Team working....Read more...
