Converter and Inverter Embedded Power Electronics Engineer to join an existing Electronic Engineering team working from requirements capture, design and development of low cost, high reliability electronic and electric systems. You will have strong general electronic design and embedded firmware development ideally from the perspective of Power Electronics working through prototypes with test equipment and rework.
Skills
3 phase inverter, DC to DC converter, microcontroller and analogue electronic design.
PCB layout design of batteries, electric machines and wiring for manufacture.
Full electronics product life cycle design, requirement, prototype, test, rework and support.
Verification and validation test and simulation.
Schematic and assembly drawing using CAD tools.
EMC for power electronics
Beng in electronics, electrical engineering, mechatronics or related.
Hands on commercial experience in a similar Electronics development role.
Role
Design and build electronic components and circuits.
Design, analyse, and verify electronics systems throughout the engineering lifecycle.
Collaborate with Systems and Software engineers and on other cross functional teams on any issues.
Support manufacturing quality test and production where needed.....Read more...
We are seeking a dynamic Manufacturing Engineer to join our team, contributing to the development of microcontroller-based power electronics products. The role focuses on designing manufacturing equipment and processes, incorporating automation, robotics. You will work on new product introductions and the development of innovative production processes.
Key Responsibilities
Design and develop automated test and inspection machines.
Lead the New Product Introduction (NPI) process, from concept to production.
Troubleshoot and resolve manufacturing issues, including technical drawings and test rig challenges.
Collaborate with production teams for process improvements and operatives??? training.
Build, test, and modify prototypes and new product concepts.
Develop electronic circuit designs, including PCB layout and system schematics.
Ideal Candidate Profile
HNC or Degree in Engineering or Technology disciplines.
Strong background in the technical aspects of electronics products and manufacturing.
Proficiency in software programming and CAD packages (NI LabVIEW, SolidWorks).
Expertise in Test Equipment electrical and mechanical design, and machine safety.
Skilled in using PCB design software and digital design (multiplexers, combinational logic circuits).
Experience with C programming
Familiarity with electronic circuit design, fault diagnosis, and debugging.....Read more...
We are seeking a dynamic Manufacturing Engineer to join our team, contributing to the development of microcontroller-based power electronics products. The role focuses on designing manufacturing equipment and processes, incorporating automation, robotics. You will work on new product introductions and the development of innovative production processes.
Key Responsibilities
Design and develop automated test and inspection machines.
Lead the New Product Introduction (NPI) process, from concept to production.
Troubleshoot and resolve manufacturing issues, including technical drawings and test rig challenges.
Collaborate with production teams for process improvements and operatives??? training.
Build, test, and modify prototypes and new product concepts.
Develop electronic circuit designs, including PCB layout and system schematics.
Ideal Candidate Profile
HNC or Degree in Engineering or Technology disciplines.
Strong background in the technical aspects of electronics products and manufacturing.
Proficiency in software programming and CAD packages (NI LabVIEW, SolidWorks).
Expertise in Test Equipment electrical and mechanical design, and machine safety.
Skilled in using PCB design software and digital design (multiplexers, combinational logic circuits).
Experience with C programming
Familiarity with electronic circuit design, fault diagnosis, and debugging.....Read more...
An exciting opportunity has arisen for a Development Designer ideally with 4 years' experience to join a well-established retail design agency. This full-time role offers excellent benefits and a salary range of £34,000 - £40,000.
As a Development Designer, you will be responsible for the technical design development using SolidWorks, creating cost-efficient solutions, and managing complex projects from inception through to production.
You will be responsible for:
* Developing detailed component and assembly drawings for accurate quoting, prototyping, and volume manufacturing.
* Providing technical support to the wider team, particularly in project management and 3D design.
* Maintaining structured documentation of design development and revisions for all projects.
* Using Sage200 and MS Excel for quoting, project management, and procurement processes.
* Collaborating with project managers to oversee production stages and sourcing the best suppliers and resources.
* Applying knowledge of manufacturing techniques and materials used in retail fixtures, furniture, and displays.
* Conducting design risk assessments for all units being prototyped or manufactured.
What we are looking for:
* Previously worked as a Development Designer, Industrial Designer, Product Designer, Store Designer, Technical Designer, CAD Designer, 3D Design Engineer, Exhibition Designer, Retail Designer or in a similar role.
* Ideally have 4 years' experience in a role.
* Skilled in SolidWorks and similar CAD applications.
* Understanding of manufacturing techniques and materials used in the production of retail fixtures and furniture/displays.
Apply now for this exceptional Development Designer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Senior Electrical Design Engineer
Salary up to £60k (DOE)
Monday to Friday
The Senior Electrical Design Engineer will oversee junior staff and undertake engineering designs, provide project management and administration duties and to monitor design team costs taking into account the programme and budget provided for each of the projects. The Senior Electrical Design Engineer will also be responsible for undertaking fee assessments and providing fee bids for projects as directed.
Key Responsibilities
- To carry out Electrical design and project management of various types of projects in accordance with the company aims and policies
- To manage design team and provide Electrical engineering support to all Electrical engineers
- Liaise with clients and attend meetings on all aspects of the projects
- Carry out surveys and produce reports
- Carry out quality inspections of projects.
- Formulate Electrical standards within the organisation
The Right Person
The successful Senior Electrical Design Engineer will have experience in the following areas:
- Experience and knowledge of current Building Regulations, specifically energy related controls etc
- Working for a large contractor in a design capacity
- Production of drawings manually. CAD experience essential
- Carry out tender analysis of returned tender packages
- Production of budget costings for all aspects of services
- Carry out site surveys
- Carry out on-site project management
- Knowledge of:- CIBSE Guides, IEE Regulations, CDM Regulations, British Standards, Revit / BIM
- Qualified to at least HNC or Degree Level
Interested? Here are your options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures. The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities
Responsible for tooling design and documentation. Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications
BS or MS in Engineering discipline or Physics.
Experience with Lean Manufacturing.
3D solid modelling experience.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting. ....Read more...
Under general direction, provide engineering skills to assist in providing innovative and cost effective solutions requiring the development or sustaining of new or improved techniques, procedures or products. Assist in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion.
Qualifications and Experience
Engineering degree, 2:1 classification or above.
Commercial experience working as a Mechanical Design Engineer post graduation
Duties
Analyse, design, develop, maintain industrial products.
Design, produce analyses, mathematical models and draw design conclusions based on those. To produce hand calculations in order to support initial design concepts. In addition, a good knowledge of a FEA package would also be useful (Ansys preferred).
Have good working knowledge of 3D CAD software ideally ProE. Have a good understanding of tolerances, limits and fits, machining processes.
Build prototypes, products and systems suitable for testing and may be required to set up and run lab simulations.
Design testing procedures and coordinate with others to perform tests. Conduct tests, document test results and develop client presentation. May present solutions to clients.
Conduct and/or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Ensure commitments are agreed, reviewed and met. ....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures. The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities
Responsible for tooling design and documentation. Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications
BS or MS in Engineering discipline or Physics.
Experience with Lean Manufacturing.
3D solid modelling experience.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting. ....Read more...
Under general direction, provide engineering skills to assist in providing innovative and cost effective solutions requiring the development or sustaining of new or improved techniques, procedures or products. Assist in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion.
Qualifications and Experience
Engineering degree, 2:1 classification or above.
Commercial experience working as a Mechanical Design Engineer post graduation
Duties
Analyse, design, develop, maintain industrial products.
Design, produce analyses, mathematical models and draw design conclusions based on those. To produce hand calculations in order to support initial design concepts. In addition, a good knowledge of a FEA package would also be useful (Ansys preferred).
Have good working knowledge of 3D CAD software ideally ProE. Have a good understanding of tolerances, limits and fits, machining processes.
Build prototypes, products and systems suitable for testing and may be required to set up and run lab simulations.
Design testing procedures and coordinate with others to perform tests. Conduct tests, document test results and develop client presentation. May present solutions to clients.
Conduct and/or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Ensure commitments are agreed, reviewed and met. ....Read more...
CNC Applications Engineer
Machine Tool / CNC Industry
Midlands Based LE1 2LB
£50,000-£55,000 salary
UK / International Travel Required
Remote Working, Company Vehicle, Overtime
Holidays, Pension, Death in Service
Are you an experienced Applications Engineer within the machine tools industry with the drive to elevate your career to the next step? If so please read on
As a machine tools applications engineer in the machine tools industry, you will help customers maximise the productivity and efficiency of their CNC mill-turn machines. Working closely with the sales, engineering, and customer support team, youll be responsible for programming, troubleshooting, and providing technical solutions tailored to customers' specific manufacturing requirements.
The Role - CNC Applications Engineer:
Customer & Stakeholder Engagement:
- Serve as liaison between UK subsidiary, and international customer base
- Represent the companys technical and strategic interests with professionalism
Technical Solution Development:
- Design machining processes and tool selection based on customer needs
- Develop accurate tooling lists and ensure optimal machine configuration
Sales & Market Support:
- Provide technical support to sales, including pre-sales consultations
- Assist in creating customer-specific technical proposals
Implementation & Training:
- Manage and conduct Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT)
- Deliver customer training and ensure effective technology transfer
Strategic Market Development:
- Support applications in designated international markets
- Drive technical improvements
Key Skills / Experience Required: CNC Applications Engineer
- Proven experience as an Applications Engineer with CNC mill-turn machines or 5-axis machinery
- Proficiency in CAD/CAM software (such as Mastercam, Siemens NX, or Fusion 360).
- Siemens Controls experience and knowledge - Essential
- Turnkey management experience, with the ability to manage multiple clients or projects simultaneously.
- Familiarity with machining processes, particularly in multi-axis mill-turn environments.
- HND/HNC in Mechanical Engineering, Manufacturing Engineering, or related field (desirable)
- Ability to travel to customer sites as required (both nationally and internationally)
- Excellent problem-solving abilities and attention to detail.
- Strong communication skills, with experience in customer training and support.
Salary and Package: Applications Engineer
- Starting base £50k-£55k (dependent on experience)
- 38.5 hour working week Monday-Friday
- Enhanced Overtime x1.5
- Specialist Training
- Company Vehicle (Hybrid)
- Expenses when working on-site
- 33 days holiday (including bank holidays)
- Long-term scope and progression
- Company Pension Scheme
- Company Laptop, Phone & Tech
- Death in Service
Interested? To apply for this CNC Applications Engineer position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Emma Gilmore 0116 254 5411 between 7.30am - 4.30pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
My client is a world leader in its field, and part of a globally successful UK-based business. They design, manufacture, sell and support a range of highly advanced equipment for global markets. Continued expansion and internal promotion is creating opportunities for talented, ambitious individuals to join their team in Wiltshire, UK.
For this Test & Validation Engineer job you will be responsible for the development of high quality, high demand products sold into a regulated environment and supporting the product design throughout its life, making continuous improvements to enhance product value.
Main responsibilities for this Test & Validation Engineer job include working with colleagues in R&D and Manufacturing to sustain existing manufacturing activities, and introduce new manufacturing capabilities for existing product and for New Product Introductions.
The Test & Validation Engineer, will be involved in the following:
Managing test facilities
Oversee the training and operation of the test facilities by other users
Support NPI/Quality in the final testing and approval of production units
Generation test plans and test procedures and execution of product tests; ensuring all findings are properly recorded and communicated
Design, development & implementation and/or configuration of test equipment for bespoke testing
Execution of physical tests in support of development validation and pre-submission requirements
The skills/experience needed for this Test & Validation Engineer job are:
Hands on practical experience in product testing and prototype manufacture
Experienced in preparation of test documentation and report preparation
Understanding of robust test plan generation, including design of experiments
Positive “can do“ attitude and an eye for detail
Experienced with CAD
This Test And Validation Engineer must be eligible to pass SC clearance and therefore VISA sponsorship can’t be considered.
My client in Melksham, Wiltshire offer great progression and benefits including hybrid working with the option to work up to two days at home.
This is an excellent job opportunity to join a developing and leading company. To apply for this Test & Validation Engineer job based in Melksham, Wiltshire pleased send your CV to RWilcocks@Redlinegroup.Com or call Ricky on 01582 878810 or 07931 788834 for more information.....Read more...
Production Engineer
Location: Ferndown, Dorset
Are you ready to join a global leader in engineering and design manufacturing? With over six decades of experience in highly regulated industries such as nuclear, aerospace, and oil and gas, our client is a trusted name in delivering mission-critical solutions. They specialise in sensors, instrumentation, and control systems for harsh environments where safety and reliability are paramount.
The Role:
As a Production Engineer, you will play a vital role in delivering engineering solutions and technical support to manufacturing teams. You will ensure production objectives are met regarding cost, quality, and schedules while driving innovation and continuous improvement.
Key Responsibilities:
- Provide accurate cost and timescale estimates for bids and projects.
- Collaborate on product design to create robust and accurate documentation.
- Ensure smooth production processes by creating manufacturing routings, BOMs, and process instructions.
- Investigate and resolve production issues promptly.
- Support lean manufacturing and propose new technologies or capital equipment as needed.
What Were Looking For:
- HNC/HND in an engineering-related discipline or extensive production engineering experience.
- Familiarity with manufacturing processes and techniques in electrical or mechanical production.
- Proficiency in reading electronic schematics, wiring schedules, and mechanical drawings.
- Experience working with ERP/MRP systems and designing jigs or fixtures (3D CAD desirable).
- Strong computer skills (Microsoft Office, including Visio).
- Eligibility for UKSV SC security clearance.
Whats on Offer:
- A collaborative and empowering work environment.
- Flexible working options to suit your lifestyle.
- The chance to work with a global leader in engineering excellence.
If you are passionate about manufacturing and enjoy working in a dynamic, innovative environment, wed love to hear from you. Apply today to take the next step in your career! If you do have any questions please reach out to liam.nother@holtengineering.co.uk....Read more...
Redline Group have recently been engaged by a leading Engineering company based in Manchester. Due to recent project wins they are now looking to recruit an experienced Electronic Design Engineer to be part of their dynamic design team.
The culture is very collaborative where engineers work together to solve engineering related problems and find the best solutions. As such they are looking for like-minded engineers who can really add value to the team. The company currently operate a hybrid working arrangement of 3 days onsite, 2 from home with everybody in on a Wednesday
The company design and manufacture electronic sensors and components for the global Automation market and they are looking for an Electronic Design Engineer with sound analogue design skills combined with some firmware development using embedded C or C++.
Key responsibilities of the Electronic Design Engineer job:
Design and development of barriers for connection between intrinsically safe circuits and non- intrinsically safe circuits
Circuit design, prototyping, verification and release testing
Specification of the design components and creation of the circuit schematic in CAD
Creation of the Intrinsic Safety and EMC Plans required to meet IS and EMC standards
Verification testing of prototypes and review PCB layouts
Key skills required for the Electronic Design Engineer job:
Excellent understanding of electronic/engineering principles and Analogue and Digital circuit design experience
Knowledge of EMC and functional safety requirements
Op-Amp Circuits, Low power/signal transformers and small signal SMPS knowledge is an advantage
Software programming experience will be beneficial
It would be advantageous if you had any knowledge or experience of process control automation methods and instrumentation or of relevant legislation (ATEX, Low voltage, EMC directives). This role would be perfect for someone with a genuine interest in analogue electronics and a solid understanding of the fundamentals electronic design principles.
This is a great chance for an Electronic Design Engineer to join a successful and stable business with the opportunity to progress their career long term.
My client are in a great location as Manchester is very easily accessible, but they are also on the edge of the Peak District so there is the best of both city and rural life.
To apply for the Electronic Design Engineer job based in Manchester or if you have any questions, please contact Graham Cross on 01582 878849 or gcross@redlinegroup.Com....Read more...
My client is looking for a Senior Production Process Design Engineer to join their Process Engineering team to work on how to take miniature, precision Electronic components from prototype to mass production.
You will work on the development, configuration and optimisation of production processes from concept to start up, certification and improvement.
You will have
Production process engineering in a manufacturing environment experience.
Understating of the creation and deployment of process control techniques.
T.M.S or M.T.M.
CAD or AutoCad skills.
Familiarity of modern process manufacturing ideas.
Manufacturing environment project management experience.
Researched process improvement or deign.
The role will involve
Develop best practices, routines and innovative solutions to improve production rates and quality of output.
To develop and improve manufacturing processes and quality control measures.
Proactively manage continuous improvement of the plant and process to ensure cost, quality and output targets are achieved.
Actively support and run continuous improvement activities in the manufacturing area.
Introduce new products or processes into production through indepth involvement with PLM to ensure they are robust and repeatable.
Maintain and strive to improve housekeeping standards through the use of the 5S approach
If you enjoy taking new never been mass produced before dense tiny electronic devices or components into mass production using new techniques and materials this role is for you.
....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures. The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities:
Responsible for tooling design and documentation. Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications:
BS or MS in Engineering discipline or Physics.
8+ years industry-relevant experience preferred, though others will be considered.
Experience with Lean Manufacturing.
3D solid modelling experience. Minimum 5 years.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting.
Candidates will be put forward for Security Clearance (SC) once the job has been accepted....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons, materials, Aircraft emergency evacuation systems. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures. The manufacturing engineer will be the technical owner of the process including work instructions, equipment, tooling, and other facility requirements.
Primary Responsibilities:
Responsible for tooling design and documentation. Must have the experience with 3D CAD and 2D drafting.
Provides hands-on support for manufacturing assembly of company products.
Technical writing.
Strong understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA).
Apply working knowledge of product design and assembly to the manufacturing process
Maintain equipment and tooling through coordination with maintenance team.
Coordinate and perform all necessary validation and or process engineering evaluations as needed for manufacturing equipment.
Preferred Qualifications:
BS or MS in Engineering discipline or Physics.
8+ years industry-relevant experience preferred, though others will be considered.
Experience with Lean Manufacturing.
3D solid modelling experience. Minimum 5 years.
Experience designing, installing, and qualifying production equipment including hand tools, fixture, and semi-automated equipment.
Familiar with typical metal working tolerances produced by milling, grinding, turning, and laser or water jet cutting.
Candidates will be put forward for Security Clearance (SC) once the job has been accepted....Read more...
My client is looking for a Senior Production Process Design Engineer to join their Process Engineering team to work on how to take miniature, precision Electronic components from prototype to mass production.
You will work on the development, configuration and optimisation of production processes from concept to start up, certification and improvement.
You will have
Production process engineering in a manufacturing environment experience.
Understating of the creation and deployment of process control techniques.
T.M.S or M.T.M.
CAD or AutoCad skills.
Familiarity of modern process manufacturing ideas.
Manufacturing environment project management experience.
Researched process improvement or deign.
The role will involve
Develop best practices, routines and innovative solutions to improve production rates and quality of output.
To develop and improve manufacturing processes and quality control measures.
Proactively manage continuous improvement of the plant and process to ensure cost, quality and output targets are achieved.
Actively support and run continuous improvement activities in the manufacturing area.
Introduce new products or processes into production through indepth involvement with PLM to ensure they are robust and repeatable.
Maintain and strive to improve housekeeping standards through the use of the 5S approach
If you enjoy taking new never been mass produced before dense tiny electronic devices or components into mass production using new techniques and materials this role is for you.
....Read more...
Overview
We are seeking a dedicated and experienced Development Engineer to join our client based in Oakham. This role will eventually lead to a Development Manager position, offering an exciting opportunity for career growth. The ideal candidate will have an electrical background, preferably within the food industry.Responsibilities
Identify opportunities for improvements and make recommendations to enhance machine and process effectiveness.Assist in managing engineering projects from inception through to completion, including writing equipment specifications, managing resources, implementing and monitoring project progress, and ensuring compliance with budgetary limitations.Adhere to company Health and Safety requirements and provide hands-on support to the Engineering team.
Qualifications
Timed served engineer, electrically bias - HNC / HND Level.Good working knowledge of PLC and servo drive / control systems.Understanding and ability to work with / troubleshoot Pneumatic and Hydraulic systems.IT literate, Competency in CAD, ideally 2D AutoCAD.Experience in installing and commissioning new equipment.Good understanding of Health and Safety regulations and contractor management.
Day-to-day
Self-motivated and able to work independently as well as part of a team.Analytical ability to approach, manage, and solve problems of varying complexity.Take a hands-on approach to work and possess excellent communication and organizational skills.
Benefits
Salary circa £45k per annum25 days annual leave, inclusive of a shutdown at Christmas plus bank holidays.Company sick pay up to 24 weeks (increasing with years of service).All PPE provided, including safety shoes.
If you are ready to take on this challenging and rewarding role, please apply with your updated resume and cover letter. We look forward to welcoming the newest member to our team at [CompanyName].....Read more...
The Role: Mechanical Design Engineer
Up to £55k DOE
My Client are opening a brand new site in Warwickshire and are recruiting for a Mechanical Design Engineer to assist in the design of machinery and equipment including mechanical systems, thermofluids, hydraulics and structural components
The Company
A company that is developing game changing product applications across many industries, to significantly impact global air quality and climate change for the better, opening a brand new site in Warwickshire, this is the right time to join a fantastic team!
Key Responsibilities
- Design of machinery and equipment including mechanical systems, thermofluids, hydraulics and structural components.
- Carrying out engineering calculations, component sizing and selection & machine design
- Mechanical design of all test systems including CAD drawings, BOM, schematics and supporting documentation
- Involved directly with concept definition, system design, component selection, testing, verification, and validation of prototypes and final products.
- Implementation of various design standards and practices including adherence to ISO9001 and CE marking to achieve type certification
- Identifying, evaluating and managing manufacturing partners and suppliers both in Europe and worldwide
- Preparation of technical manuals and reports
- Technical support and guidance to other team members. Participating in design meetings and disseminating progress to team members and management
- Supporting workshop production and build/assembly of large prototypes as required
The Right Person
The successful Mechanical Design Engineer will ideally be educated to degree level in a relevant discipline, as well as possessing the following key skills:
- 5+ years relevant industrial experience in mechanical design of machines, systems, engines, heat pumps or similar
- Automotive and/or heavy engineering industry experience
- Preferably hydraulic systems design experience
- Practical / Hands-on experience
- Solidworks experience required. PDM an advantage, but not essential
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionsearch.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
Panel build (fitting electrical components to a back plate)
Reading wiring schematics and interpret cable sizes, ferrule type
Wiring of Mounting plate to an approved circuit diagram
Occasional mechanical work, building and testing of Ex enclosures
Electrical fault finding & rework
Opportunity for off site electrical work (after induction training)
Training:
Apprenticeship Standard is Level 2 Lean Manufacturing Operative
You will be required to attend Plymouth Engineering Skills Centre a day a week as part of your apprenticeship training
Additional units include:
AUEC2-039 Assembling, wiring and testing electrical panels/components mounted in enclosures
AUEC2-010 Wiring and testing electrical equipment & circuits
AUEC2-00 Maintaining electrical units/ systems
Training Outcome:
Once qualified there are many routes that can be taken especially through Compex on site
Promotion from within is common place at JCE even the management Team started as apprentices
This could be via sales, technical engineer, CAD engineer, or management
Employer Description:JCE (Europe) Ltd specialise in the design and manufacture of high quality, internationally approved Ex Electrical Control Systems for applications where both hazardous and non-hazardous conditions exist.
JCE is one of the last remaining E xd enclosure manufacturers, who use UK foundries. Total Made in Britain company.
Our USP is we are not just an E xd Enclosure manufacturer, we are also a Ex solution provider so we also will provide solutions for clients, even if our equipment is not used.
JCE Europe Ltd is part of a larger group (JCE GROUP) and our reach is global. The areas covered by JCE Europe Ltd are mainly UK & Europe.Working Hours :Monday - Friday, 8.30am to 4.30pm.
30 minutes for lunch.
15 minutes morning break.
15 minutes afternoon break.Skills: Communication skills,Attention to detail,Problem solving skills,Presentation skills,Number skills,Team working,Patience,Teamwork,Willingness to learn....Read more...
Medical Devices Consultant – Senior Mechanical Engineer – Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role. The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology. Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties. Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices. Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required. However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector. Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly. The organisation is open to candidates with varying levels of experience. If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Senior Electrical Engineer (Contract)
Location: Weymouth, Dorset, UKContract: Initial 6 months, Outside IR35Rate: Up to £400 per day (dependent on experience)Start Date: Immediate
Role Overview
We are seeking a highly experienced Senior Electrical Engineer to join our Research and Development team. This role involves developing innovative solutions for printing systems, factory line processes, and associated modules. You will tackle complex engineering challenges using cutting-edge technologies, technical analysis, and creative problem-solving.
Key Responsibilities
Develop and implement new designs and systems based on evolving technologies.
Conduct technical risk assessments and recommend mitigation measures.
Prepare and review specifications, ensuring compliance with industry standards.
Collaborate with teams to identify project requirements and deliver technical solutions.
Manage quality, cost, and time balance for assigned tasks.
Actively contribute to continuous improvement by evaluating outcomes and incorporating feedback.
Essential Skills & Experience
Qualifications:
Master’s Degree in a technical discipline with mid-level experience or
Bachelor’s Degree with senior-level experience, or Chartered Engineer status with mid-level experience.
High-level understanding of electrical, electronic, electromechanical, and mechatronic systems.
Proven experience in the design and assembly of electrical/electronic components and associated cost management.
Technical Proficiency:
Expertise in CAD tools such as ePlan or Altium and EDM systems (e.g., Teamcenter PLM).
Strong understanding of BS EN 61082 standards and related industry benchmarks.
Skilled in measurement, control, and regulation systems, including sensors, actuators, wiring, safety, and circuit design.
Knowledge of EMC and ESD applications and testing.
Desirable Skills
Experience with motion control systems and motor tuning.
Knowledge of PCB layout and SAP systems.
Background in designing special-purpose machinery.
What We Value
Strong problem-solving capabilities and a proactive mindset.
Excellent communication skills to collaborate effectively across teams and stakeholders.
Commitment to quality, sustainability, and health & safety.
Apply Now: Take the next step in your career by joining a team that values innovation, excellence, and professional growth. Reach out to us for further details and to submit your application.....Read more...
Technical Sales and Project EngineerRochdaleMonday-Thursday8am-5pmFriday8am-1pm£35,000-£45,000My Client, is a leading manufacturer within their field is seeking an experienced Production Engineer to join their team to assist with their growth and expansion.Reporting into the Head of sales, this role will play a pivotal part to business growth assisting the business with new enquires and existing projects.Technical Sales and Project Engineer RequirementsQualifications/experience required
Experience working in a similar role within in a manufacturing environment is essentialExperience in using CAD packages is essential. (Ideally Powershape, Fusion 360 or Autodesk)Experience working with manufacturing ERP systems is essential.Experience of working to and meeting ISO9001requirements or equivalent is essential.Experience within a Commercial /Technical Sales environment would be advantageousKnowledge of Plastics and Moulding / Added value is highly advantageousExperience in process improvement and/or continuous improvement would be advantageous.Full UK Driving License
Technical Sales and Project Engineer:Role responsibilities
Assist the Technical Sales Team in the provision of costs/prices on both existing products and new projects.Ensure the provision of full, detailed and accurate specifications to assist in the establishment of relevant Processes and Procedures by Engineering/Production.Liaise, where necessary, with Customers and Suppliers to provide relevant information to enable efficient project implementation.Assist in the evaluation of quoted prices for customer products vs actual costs in Production.Co-ordinate and liaise with other associated departments, namely Production, Engineering, Quality, Purchasing, and Sales in respect of project administration.Work with Production and Quality departments to drive improvements in the process for existing customer products.Manage samples process both internally and to customers.Ensure strict control of all relevant project documentation and electronic data files.
This an exciting opportunity to join a well-established family business with ambitious growth plans.This role would suit an experienced Manufacturing engineer, Project Engineer or Sales Engineer/Estimator looking for their next steps.The company would also consider candidates with relevant experience who are looking to take the next steps in their career.Keywords: Project Engineer, Sales Engineer, Manufacturing Engineer, Sales EstimatorWinsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManH Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
Senior Mechanical Design Engineer
Salary up to £65k (DOE)
25 days holiday + bank holidays
Company Laptop
Company Phone
Discretionary Bonuses (one at Christmas time and one mid-year)
Company Pension Scheme
Travel to and from site/client meetings expensed
The Senior Mechanical Design Engineers role will be to carry out mechanical and public health design duties, oversee junior staff, provide project management and administration duties and to monitor design team costs taking into account the programme and budget provided for each of the projects
Key Responsibilities
- To carry out Mechanical design and project management of various types of projects in accordance with the company aims and policies.
- Carry out condition and feasibility surveys in various parts of England at times and produce reports.
- To manage the design team and provide Mechanical engineering support to all Electrical engineers.
- Liaise with clients and attend meetings on all aspects of the projects.
- Carry out quality inspections of projects.
- Use CAD / BIM systems in line with Pinnacle company procedures.
- Monitor financial aspects of projects.
- Work within and be responsible for Mechanical standards within the organisation
The Right Person
The successful Senior Mechanical Design Engineer will have experience in the following areas:
- Experience in the use of Revit MEP
- Experience in the use of Hevacomp/IES VE
- Experience and knowledge of current Building Regulations / Renewable technologies / IES Thermal Modelling / SAPs/ SBEM Calculations/ EPCs / BREEAM / GLA London Plan / Passivhaus Standards.
- Working for a large contractor or local authority / housing association in a design capacity
- Project management of multi-disciplinary projects
- Production of tender packages and carrying out tender analysis of returned tender packages
- Production of budget costings for all aspects of services
- Carrying out site surveys
- Production of budget estimates
Interested? Here are your options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionrecruitment.co.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.....Read more...
Mechanical Engineer (Contract)
Location: Weymouth, hybrid Contract: Initial 9 months, Outside IR35Rate: Up to £400 per day Start Date: Urgent
Role Overview
Join our dynamic engineering team as a Mechanical Engineer to support sustaining tasks, address design issues, and ensure high-quality solutions are implemented efficiently. Collaborate closely with Engineering Managers, Senior Engineers, and Production teams to rectify and improve designs, models, and drawings, releasing fixes into the PLM system.
Key Responsibilities
Investigate and resolve engineering issues using a sound evidence-based approach.
Define, design, and optimise manufacturing processes, considering costs and tolerances.
Apply design solutions, ensuring scalability, maintainability, and safety.
Contribute to the continuous improvement of processes, products, and systems.
Ensure compliance with relevant codes of conduct, quality standards, and health & safety practices.
Essential Skills & Experience
Qualifications:
Bachelor’s Degree in a technical discipline, or equivalent Level 6 qualification with relevant experience.
Level 5 (HND) with senior-level experience also considered.
Knowledge of dynamic mechanical, electromechanical, and mechatronic systems.
Technical Expertise:
Proficiency in 3D CAD tools and EDM systems (e.g., Teamcenter PLM).
Strong understanding of BS8888 and ISO8015 standards.
Competence in Microsoft Office tools (Excel, Word, PowerPoint).
Desirable Skills
Knowledge of DFM/DFA principles.
Experience with FEA (e.g., ANSYS), SAP, or special-purpose machinery design.
What We Value
Dedication to quality, sustainability, and health & safety.
Strong communication skills and the ability to collaborate effectively at all levels.
A proactive approach to problem-solving and professional development.
Apply Today: Don’t miss the opportunity to work on innovative projects and make a tangible impact. Reach out to us for more details and to submit your application.....Read more...
