As an Engineering Apprentice at Ecotech Engineers, you will be involved in diverse projects and will help to deliver innovative design solutions across a broad range of clients, with our senior engineers supporting you along the way.
You’ll be involved with our engineers in:
Foundation design and structural assessments
Producing foundation schedules, zoning plans and CAD mark-ups
Supporting Senior CAD Technician with drafting duties
Reviewing site investigation information and technical data
Attending site visits with senior staff
Problem solving and designing simple structural engineering tasks
Supporting senior engineering team to prepare design outputs for architects, developers and housebuilders
The post will offer the successful applicant an interesting, challenging and varied workload in a fast-paced environment, as well as allowing them to develop personally and professionally, as an engineer.
Your responsibilities will grow as your knowledge develops. We will also guide you through any elements of the course that aren’t typically part of our day-to-day work.Training:
You’ll be enrolled onto a Level 6 Degree Apprenticeship which starts in September 2026, working towards a BEng (Hons), with one day per week spent at Derby University for your off-the-job learning
We will support your professional development with IStructE or ICE throughout your training
Training Outcome:
The degree will set the candidate into the engineering profession with the aim to forward them into a Masters in Structural Engineering and then support to become a chartered structural engineer
Employer Description:Ecotech Engineers Ltd is a structural engineering consultancy established in 2020 by Laura Holland. We work predominantly within the residential sector, supporting a range of national housebuilders. We are experts in the design of all construction materials above and below ground and have specialist knowledge in undertaking foundation appraisals for challenging sites, including those affected by peat, soft clays and historic mining.
We advise on the most suitable foundation solutions for future developments, taking into account site conditions, budget, programme and buildability. We support developers from pre-land purchase through to construction and pride ourselves on responding quickly to our clients' needs, providing both design and advisory services to help resolve any unexpected issues that may arise.
With our breadth of knowledge and experience in the residential sector, we are also able to apply our engineering and drafting expertise to private residential projects, assisting homeowners and prospective homeowners with extensions, renovations and structural inspections.Working Hours :Monday - Friday, 9.00am - 5.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Initiative,Self-motivated,Positive attitude,Willingness to assist,Independent working,Curious, eager to learn....Read more...
Assist an engineer with service calls to various sites, including schools, hospitals, restaurants and bars
Identifying the fault
Completing worksheets
Keeping the clients informed
Requsting parts to be ordered by the service desk team
Returning to site to complete repairs
Assisting with deliveries of new equipment
Assist in the installation of new equipment to within one meter of supplies
Training:One day per week during term time.
North East Surrey College of Technology (Nescot)Reigate Road,Ewell,Epsom,Surrey.KT17 3DS.Training Outcome:On satisfactory completion of the appreticeship you would be given the oportunity of working for Swift Catering Equipment as a Mobile service/instalation engineer.Employer Description:Swift Catering Equipment Limited has been trading for 45 years and is well establiched within the industry. Originally a family run company the friendly atmosphere has been retained with several employees who have been with us over 15 years.
We manage large contracts for complete new commercial kitchens from specifications, cad drawings,supply and instalation. We complete a large number of service contracts, with schools, colleges, hospitals, hotels and bars as well as breakdown calls.Working Hours :Monday to Friday, 8am to 4pm. Start and finish times may vary, depending on the requirements of the work and site restrictions.Skills: Communication skills,IT skills,Attention to detail,Customer care skills,Problem solving skills,Number skills,Team working,Initiative,Physical fitness....Read more...
Electrical Engineer required a global Engineering & Manufacturing company, offering 75 years of experience as the supplier of choice to Oil and Gas, Rail, Mining and Energy industries.This organisation design and manufacture innovative technologies for Electrical infrastructures and are actively searching for an experience Electrical Engineer to join their 2,000 plus global workforce.The successful Electrical Engineer will be easily able to commute to BRADFORD from surrounding towns & cities, including Leeds, Dewsbury, Keighley, Pudsey, Halifax, Brighouse and Shipley.Key Responsibilities of the Electrical Engineer will include:
Design and deliver electrical solutions for LV and MV systems in line with project and client requirements
Produce high-quality engineering drawings, schematics and all associated technical documentation
Create accurate Bills of Materials (BOMs) and detailed manufacturing data
Provide technical support across the full project lifecycle, ensuring successful delivery
Take part in Factory Acceptance Tests (FAT) and offer technical assistance to customers
Liaise with engineering, production and quality teams to ensure projects run smoothly
Track project progress and identify any risks or issues that could affect delivery timelines
Assist in recognising and mitigating technical and project-related risks
Support ongoing improvements to engineering processes, standards and best practices
For the Electrical Engineer role, we are keen to receive CV’s from candidates who possess:
Degree in Electrical Engineering or a related field, or equivalent hands-on experience
Experience working with LV and/or MV electrical systems such as switchgear, transformers and protection systems
Good understanding of control circuits, protection schemes and engineering documentation
Ability to interpret technical specifications and translate them into practical, workable solutions
Proficient in the use of CAD software, including AutoCAD or similar tools
Familiar with relevant industry standards such as IEC and BS EN
Strong organisational skills with the ability to manage multiple priorities effectively
Confident communicator, able to work with both technical and non-technical stakeholders
Previous exposure to testing, Factory Acceptance Tests (FATs) or technical reviews would be advantageous
Salary & Benefits:
£53,000 to £58,000 p/a depending on experience
Attractive Pension
33 Days annual leave
Healthcare
Life assurance
Cycle to work scheme
Monday to Friday 8am – 4pm
....Read more...
An opportunity has arisen for a Mechanical Engineer to join a specialist product design and engineering consultancy operating within the medical technology and regulated product development sector.
The organisation delivers end-to-end engineering solutions across medical devices and diagnostic technologies, supporting projects from early-stage concept development through to prototyping, testing and preparation for manufacture. Work spans single-use consumables through to complex electromechanical systems, with a strong emphasis on practical engineering, innovation and real-world product development.
This is a collaborative engineering environment where engineers work closely within multidisciplinary teams, supported by experienced senior engineers and project leads. The role offers strong exposure to hands-on development work, client interaction and the full product lifecycle.
The Mechanical Engineer will be responsible for contributing to innovative engineering solutions, building and testing prototypes, and developing detailed mechanical designs for manufacture.
Main Responsibilities of the Mechanical Engineer (Cambridge – Hybrid):
Understand technical problems and develop practical, innovative engineering solutions
Contribute to concept development and mechanical design activities across multiple projects
Produce detailed mechanical designs with consideration for design for manufacture and assembly (DFM/DFA)
Build proof-of-principle prototypes and test rigs within a laboratory environment
Carry out hands-on testing to validate and refine engineering solutions
Work collaboratively with electronics, industrial design and other engineering disciplines to develop complete product solutions
Prepare technical reports and present findings to internal teams and clients
Support project planning and task tracking within engineering project teams
Contribute to continuous improvement of engineering processes and product development approaches
Requirements of the Mechanical Engineer (Cambridge – Hybrid):
Degree in Mechanical Engineering or related engineering/scientific discipline (minimum 2:1 preferred)
At least 3 years’ experience in a commercial engineering or product development environment, or equivalent postgraduate qualification (e.G. PhD)
Strong ability to analyse problems and develop practical engineering solutions
Good communication skills with the ability to work effectively within multidisciplinary teams
Experience working on engineering design projects from concept through to prototype
Willingness to work on-site in Cambridge with occasional travel to clients or manufacturing partners
Right to work in the UK (no sponsorship available)
Desirable:
Experience using SolidWorks or similar CAD software
Experience within the medical device or regulated engineering sectors
Exposure to plastics, injection moulding or manufacturing processes
To apply for this Mechanical Engineer role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com
01582 878 830....Read more...
Mechanical Design Engineer | Cleckheaton Salary: £35,000-£45,000 dependent on experience Some engineering roles focus on a small part of the process. This isn't one of them. We're looking for a Senior Design Engineer to join a specialist engineering business developing innovative thermal management systems. Working as part of a small, highly skilled team, you'll take ownership of projects from initial concept through to prototyping, testing and final delivery. If you enjoy solving complex engineering challenges, turning ideas into practical solutions and seeing the direct impact of your work, this could be the opportunity you've been looking for. This is a role where your ideas will be heard, your decisions will matter, and your contribution will be visible. You'll have the freedom to take ownership, work directly with clients and suppliers, and help shape innovative products from day one. What's on Offer?
Mechanical Design Engineer – 3+ years’ experience - £35,000-£40,000 per annum
Senior Mechanical Design Engineer – 5+ years’ experience - £40,000-£45,000 per annumGenuine ownership of projects from concept to deliveryExposure to the full engineering lifecycleDirect collaboration with experienced engineers and customersVaried and technically challenging workA supportive environment that values curiosity, initiative and continuous learningThe opportunity to make a real impact within a growing business
The Role Working closely with the Head of Engineering, responsibilities will include:
Translating broad customer or project briefs into clear engineering requirementsProducing detailed 3D CAD designs, engineering drawings and technical documentationApplying design-for-manufacture principles to develop practical, buildable solutionsManaging bills of materials, engineering changes and part releasesPlanning and supporting prototype builds using a range of manufacturing methodsDesigning and conducting test programmes, analysing results and implementing improvementsIdentifying root causes of technical issues and driving continuous product developmentManaging projects from concept through to delivery, proactively communicating progress and risksLiaising with suppliers, manufacturers, testing facilities and customersPresenting technical information, design reviews and project updates to stakeholders
About You We're interested in engineers who enjoy tackling challenging problems and working independently to find practical solutions. You'll have:
A degree in Mechanical Engineering, Design Engineering or a related disciplineExperience using 3D CAD software such as SolidWorks, Onshape or similar3-5+ years’ experience post-graduation and a strong understanding of mechanical design principles and engineering fundamentalsHands-on experience of prototyping, product development and testingKnowledge of engineering drawings, documentation and design standardsExcellent problem-solving skills and a methodical approach to engineering challengesThe confidence to work from broad briefs and make informed engineering decisionsStrong communication skills, both written and verbalA proactive mindset and genuine desire to learn and develop
Experience within thermal management, heat exchangers, HVAC, electronics cooling, FEA, CFD or bespoke product development environments would be advantageous, but is not essential. Please note, sponsorship is not available for this role. Applicants must have the unrestricted right to work in the UK. How to Apply If you're looking for an engineering role where you'll have real influence, technical variety and the opportunity to see your designs become reality, we'd love to hear from you. Apply today with your CV. Key Appointments is managing the recruitment process on our behalf. They will assess your suitability for the role based on the information contained in your CV and application. This includes skills, experience, education, and location. By applying for this role, you give consent for your CV to be processed by Key Appointments for recruitment purposes. Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.....Read more...
The Apprentice Engineer will assist in producing accurate 3D CAD models, engineering drawings to BS 8888 standards, and bills of materials (BOMs) for production and project-specific equipment. The role also supports workshop operations through the creation of build documentation, implementation of minor design improvements, and assistance with testing, commissioning, and maintenance activities.
The position provides practical hands-on experience across mechanical, electrical, manufacturing, and workshop disciplines while supporting the completion of an approved engineering apprenticeship programme.
Role specific responsibilities:
Produce and update accurate 3D CAD models and assemblies for specialist equipment
Produce engineering drawings in accordance with BS 8888 standards
Generate and maintain bills of materials (BOMs) for project and production equipment
Validate CAD models through cross-referencing against completed equipment and assemblies
Implement minor design modifications to improve equipment functionality, manufacturability, reliability, or serviceability
Support design verification activities, including finite element analysis (FEA) simulations where applicable
Produce supporting technical documentation, including equipment manuals, build instructions, and assembly documentation
Provide technical support to workshop engineers during manufacture, assembly, testing, and commissioning activities
Assist in the design and development of control systems, including panel layouts and equipment wiring designs
Participate in the design and build of CRC Evans specialist equipment, including:
Induction coils
Coating frames
PP tape machines
Surface preparation equipment
Assist with the build and testing of prototype equipment as part of a multidisciplinary engineering team
Support field activities and equipment testing, including:
Procedure Qualification Trials (PQT), where required
Support refurbishment, reactive maintenance, and planned maintenance activities on plant and specialist equipment, including:
Generators
Compressors
Blast and extraction equipment
Polyurethane pumps
Other specialist machinery
Work collaboratively with engineers and specialists from multiple disciplines across the business
Attend college and complete all coursework, assessments, and training associated with the apprenticeship programme
Attend internal and external training courses as required to support ongoing development
Maintain a proactive attitude toward continuous improvement and professional development
Undertake occasional travel and potential international assignments during later stages of the apprenticeship programme
Training:
Training to take place at Burnley College. This will commence in September
Training Outcome:
There is potential for full time employment on successful completion of the apprenticeship
Employer Description:CRC Evans is a leading provider of welding and coating services, technologies and integrated solutions for the onshore and offshore energy and infrastructure sectors.Working Hours :Monday to Friday. Shifts to be confirmed.Skills: Communication skills,Attention to detail,Number skills,Team working....Read more...
Medical Devices – Senior Mechanical Design Engineer – Cambridge
Due to successful growth plans, a Medical Devices organization based in Cambridge is currently seeking a Senior Mechanical Design Engineer to contribute to the development and improvement of life-saving Medical Devices.
Collaborating closely with other industry experts, such as electronics design engineers, software engineers, physicists, and other Medical Devices specialists, you will tackle some of the most complex challenges in the development of new Medical Technologies.
Ideally, you will have a background in developing new Medical Devices throughout the entire design life cycle, adhering to ISO 13485 standards. If you have not worked on Medical Devices, we will consider candidates from other highly regulated industries such as life sciences, robotics, product development, etc.
For the 3D CAD elements of your role, you will primarily use SolidWorks. Familiarity with this tool would be advantageous, but we are open to considering other 3D CAD tools if you have a proven track record of quickly acquiring new skills.
When discussing complex problems, it would be beneficial if the Medical Devices you have worked on have involved fluidics, mechanism design, thermal issues, FEA, or other intricate applications. We do not expect you to have experience in all of these areas; they are just a few examples of the challenges you may encounter.
This company is experiencing growth but remains at a size where your work will significantly impact the company's success and projects. Therefore, we are seeking a team player accustomed to collaborating with diverse individuals both within and outside of the organization.
While continually facing challenges, you will advance your skills at the forefront of the sector. In addition to this, you will receive an excellent starting salary, a bonus (typically around 20%, recently even higher), BUPA healthcare, a pension plan, a generous holiday allowance, and other outstanding benefits.
Salary will be commensurate with experience, and we welcome applications from candidates with a few years of industry experience to those with over twenty years of experience. Finding the right fit is more important to us than a specific number of years of experience.
It is expected that you hold a degree in addition to any industry experience. If you also possess a PhD, it would be welcomed but is not essential.
Interviews will be conducted as soon as a suitable candidate is identified. If you are interested in exploring this role, we recommend submitting your application and CV. Please note that your CV will not be forwarded to the company until after we have discussed the role and the company in detail.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialised recruitment company operating in the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
As part of your role, you will:
Manufacture, assemble and maintain high-precision injection mould tools
Operate and programme CNC milling and turning machines
Work with wire erosion and spark erosion (EDM) technologies
Use manual machines including milling machines, lathes and grinders
Carry out tool modifications, repairs and fault finding
Support CAM programming and machining strategy development
Assist with CAD/design processes and engineering drawings
Work with hot runner systems, wiring and diagnostics
Carry out laser welding and finishing processes
Inspect and ensure components meet tight tolerances and quality standards
Contribute to continuous improvement and process optimisation
Maintain a safe, organised and professional workshop environment
Training:Day release training at Oaklands College - Welwyn Garden City Campus
You will complete a Level 4 Engineering Manufacturing Technician Apprenticeship, which may include:
Advanced machining principles (CNC & manual)
CAD/CAM and engineering design fundamentals
Manufacturing processes and materials science
Quality assurance and inspection techniques
Problem-solving and fault-finding in engineering systems
Health, safety, and engineering standards
Training will combine on-the-job learning with off-the-job study, potentially leading to a Higher National Certificate (HNC) or equivalent qualification
Training Outcome:Upon successful completion, you could progress into roles such as:
Advanced Toolmaker / Senior Toolmaker
CNC Programmer / Manufacturing Engineer
Toolroom Supervisor or Technical Specialist
This apprenticeship provides a strong foundation for a long-term, high-level engineering career.Employer Description:At Neptune Injection Ltd, part of Neptune Engineering, we have built a strong reputation for quality, innovation, and flexibility. With over 50 years of combined experience, we are proud to be one of the UK’s leading specialists in injection moulding and mould tooling.Working Hours :Monday - Thursday, 08:00 - 17:00 and Friday, 08:00 - 16:00
Optional overtime available.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
An exciting opportunity has arisen for an Electrical Hardware Engineer to join a high-performing engineering team developing cutting-edge flight simulation technology. These systems replicate real-world aircraft environments and play a critical role in pilot training and aviation safety worldwide.
This role offers the chance to work at the forefront of aerospace innovation, contributing to the design and delivery of advanced electrical and electro-mechanical hardware systems in a fast-paced, customer-driven environment.
You will play a key role in the design, development, and delivery of electrical hardware solutions for complex simulation systems. Working within a multidisciplinary team, you will contribute across the full engineering lifecycle, from concept through to validation and delivery.
Key Responsibilities
- Design and develop electrical hardware systems for advanced flight simulators
- Produce technical specifications, schematics, and electrical designs
- Develop power distribution systems (single & three-phase), including protection and cable sizing
- Collaborate with software, systems, and mechanical teams to deliver integrated solutions
- Ensure compliance with industry standards and safety-critical requirements
- Conduct testing, validation, and troubleshooting of hardware systems
- Support EMC design and testing activities
- Engage with suppliers for component selection and integration
- Contribute to continuous improvement and innovation across hardware capabilities
- Support or mentor junior engineers where appropriate
Skills & Experience
- Degree in Electrical / Electronic Engineering or similar
- 510+ years experience in electrical hardware design (aerospace, defence, simulation, or similar)
- Strong experience with:
- Electrical design and power distribution systems
- Electrical CAD tools (schematics, wiring diagrams, panel layouts)
- EMC principles (grounding, shielding, filtering)
- Hardware testing, validation, and troubleshooting
- Knowledge of BS 7671, Low Voltage Directive, EMC Directive
- Experience working across the full product lifecycle (concept to production)
- Strong communication skills and ability to work within multidisciplinary teams
Desirable Experience
- Chartered Engineer (or working towards)
- Experience in flight simulation, avionics, or aerospace systems
- Exposure to computing system integration (rack systems, cooling, data cabling)
- Background in high-reliability or safety-critical environments
Benefits
- Competitive salary + discretionary annual bonus
- Pension (matched up to 7%)
- 25 days holiday + bank holidays (with option to buy/sell)
- Private medical insurance
- Life assurance (4x salary)
- Group income protection
- Employee assistance & wellbeing support (24/7)
- Retail, travel, and leisure discounts
This is a fantastic opportunity for an experienced hardware engineer looking to work on complex, high-impact systems at the cutting edge of aerospace technology.
TT....Read more...
Assist with the design and development of civil engineering projects
Produce and amend technical drawings using CAD software
Support senior engineers with calculations, measurements and technical documentation
Help prepare design reports, specifications and project information
Contribute to infrastructure projects such as highways, drainage or utilities
Interpret engineering drawings and site information
Liaise with clients, contractors and internal teams
Support site visits, surveys and inspections where required
Ensure work complies with industry standards, health & safety and company procedures
Work towards completing the Level 3 Civil Engineering Technician Apprenticeship standard
Training:
You will train at the Civil Engineering Training Centre in Lee-on-the-Solent on either block or day release
You will complete training on-the-job and off-the-job as part of your paid employment
Training Outcome:
To become a permanent employee and continue your development within the civil engineering sector as part of our company
Employer Description:Patterson Reeves & Partners, Consulting Civil & Structural Engineers and Building Consultants was established in 1993 by Chartered Civil Engineer Neil Patterson, Chartered Structural Engineer Philip Reeves and IT Manager Graeme King.
The Practice is a quality assured, modern multi-disciplinary consultancy, committed to offering a first class service and providing cost effective solutions to both large and small projects using the latest computer technology.
A blend of experience and specialist expertise has enabled the practice to enjoy a sound reputation in many fields, demonstrated by repeat business from clients. Every project, however small, is assigned to a Chartered Engineer to ensure that the needs of the Client are fully understood and fulfilled.
The Practice is able to offer a diverse range of services undertaken by highly experienced and professionally qualified and motivated staff. We have considerable experience of Civil and Structural Design in connection with the Power Industry including complete substations for National Grid, Wind Farms and Converter Stations.Working Hours :Monday to Friday, 9.00am- 5.00pmSkills: Communication skills,Attention to detail,Problem solving skills,Team working....Read more...
This role will be heavily involved with both design and manufacturing, and the day-to-day role will initially involve:
Training and development of 3D CAD modelling utilising SolidWorks
We will then focus on:
Taking these models and creating 2D technical drawings
Printing, issuing and technically supporting the on-site engineers
You will follow your parts through the manufacture process via our on-site production facility, supporting the engineers where required. This allows you to be fully involved with the process from survey through to design, manufacture and installation.Training:
Engineering Manufacturing Technician Level 4
Apprentices will enrol and start at college in September
Apprentices attend Loughborough College 1 day per week during term time. The rest of the time is spent in the workplace with the employer
Dedicated trainer/assessor to visit the apprentice(s) in the workplace
Training Outcome:We aim to enable apprentices to be able to hold the job title of a fully-fledged “Design Engineer”.Employer Description:International Lift Equipment design, manufacture and supply lift equipment to the passenger lift industry within the U.K. We manufacture in house from our Leicester branch whilst having a main headquarters in London and a satellite drawing office in Yorkshire. We engineer bespoke solutions for passenger lifts involving full survey, design and manufacture of the components. These components span both mechanical and electrical and these can be made up of single parts, single assemblies or complete lift packages.Working Hours :Between 8:30am - 5pm (Monday - Thursday) and 8:30am - 4pm (Friday).Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Creative....Read more...
You will begin by learning CAD skills which are the basis of all the construction designs we do
You will work alongside experienced technicians and engineers to develop your knowledge of building engineering
You will translate civil engineers’ and architects’ designs into technical drawings, taking into account elements such as environmental features and utilities, making decisions and recommendations as to how these are dealt with
You will communicate with clients, suppliers and colleagues as part of this process
As your skills develop, you will then start to be involved in engineering design, working towards designing independently
You will be supported all along with on-the-job training and mentoring from our team of experienced, industry-leading professionals at our office in Gloucester
Training:You will join as an apprentice engineer and start your degree in September 2026. Through this Level 6-degree apprenticeship you will gain a BEng in Civil Engineering from University of the West of England. Apprentices without level 2 English and maths will need to achieve this level prior to taking the end-point assessment. Attending university 1-day a week for 5-years at no cost to you. You’ll be working in the office in Gloucester for the other 4 days of the week and earning a salary.
NOTE: Candidates must currently live within a practical daily travelling distance of the office in Gloucester to be considered for the position. Training Outcome:Once you have successfully completed your degree, you will be appointed as a Graduate Civil or Structural Engineer. From there you will progress to managing your own projects as a Civil or Structural Engineer and the next step is to manage your own team of apprentices and graduates as a Senior or Principal Engineer. Employer Description:We are a well established and respected consultancy and are large enough to provide excellent career development and a friendly work environment but small enough to give you the opportunity to work in project teams side-by-side with senior staff.
We work with clients including household names such as Whitbread, Merlin Entertainments (including Legoland), Costa, JD Wetherspoon, Soho House, Taylor Wimpey and Galliard so you'll get a wide variety of experience as you launch your career.Working Hours :Monday to Friday, 8.30am to 5.00pm, with one hour unpaid for lunch. One of these days per week will be spent at university.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills....Read more...
An established and highly respected manufacturing business based in Bournemouth is seeking an experienced Senior Production Engineer to support and improve high-quality electro-mechanical production operations.
This role plays a key part in process optimisation, tooling and fixture design, continuous improvement, and production support, and working closely with cross-functional teams to ensure products are manufactured efficiently, safely, and to the highest standards.
The position is ideally suited to a hands-on engineer with experience in high-mix, low-to-medium volume manufacturing environments who is passionate about precision engineering, lean manufacturing, and continuous improvement.
Key Responsibilities for the Senior Production Engineer based in Bournemouth
Develop and maintain detailed production documentation including work instructions, process flows, PFMEAs, machine setup sheets, and TPM schedules
Design and implement jigs, fixtures, and tooling using SolidWorks to improve efficiency, repeatability, and ergonomics
Optimise production line layouts using AutoCAD to enhance workflow, reduce waste, and maximise space utilisation
Lead continuous improvement initiatives using Lean Manufacturing, Six Sigma, and 6S methodologies
Provide hands-on technical support to production teams, troubleshooting process and equipment issues to minimise downtime
Train and support production trainers to ensure consistent quality, safety, and operational standards
Conduct process audits and line assessments to ensure compliance with internal procedures and external regulations
Collaborate with engineering, quality, and operations teams to improve product quality, manufacturability, and cost-effectiveness
Design and develop test equipment and validation procedures to ensure products meet performance specifications
Lead process standardisation and automation projects to improve throughput and reduce variability
Evaluate and implement new manufacturing technologies to maintain competitive advantage
Monitor production capacity, identify bottlenecks, and implement solutions to optimise resource utilisation
Carry out cost estimation and time studies, ensuring ERP routings reflect actual production performance
Lead capital equipment selection, justification, ROI analysis, procurement, and implementation
Promote a safe working environment and ensure full compliance with health, safety, environmental, and quality standards
Essential Skills & Experience for the Senior Production Engineer based in Bournemouth
Proven experience as a Manufacturing, Production, or Mechanical Engineer
Background in a high-mix, low-to-medium volume manufacturing environment
HND or equivalent in Mechanical, Industrial, or Production Engineering
Strong knowledge of Lean Manufacturing, Six Sigma, and continuous improvement techniques
Proficient in 3D CAD software, particularly SolidWorks, for tooling and fixture design
Experience using ERP/MRP systems (such as Priority) for BOMs, routings, and work order planning
Strong change management skills, including implementing Engineering Change Requests (ECRs)
Excellent problem-solving and analytical skills
Strong communication skills with the ability to present technical information clearly
Proficient in Microsoft Office
If you are keen or would like to find out more information about this Senior Production Engineer opportunity based in Bournemouth please send over an updated cv to nking@redlinegroup.Com or call 01582 878839. Please note this opportunity will not offer sponsorship.....Read more...
Principal Mechanical Engineer
Location: Cambridge, UK – Hybrid (Office-Focused)
An opportunity has arisen for a Principal Mechanical Engineer to join a specialist product design and engineering consultancy operating within the medical technology and highly regulated product development sector.
The organisation delivers end-to-end engineering solutions for global clients, working across early-stage concept development, detailed mechanical design, prototyping, testing and design for manufacture. Projects range from single-use medical devices through to complex electromechanical systems, with a strong emphasis on practical engineering, rapid iteration and rigorous technical validation.
This is a highly collaborative and hands-on engineering environment where Principal Engineers play a key role in both technical delivery and project leadership. The culture is non-hierarchical, with engineers at all levels encouraged to contribute to technical direction, problem-solving and innovation.
The Principal Mechanical Engineer will act as a technical lead across multiple projects, combining deep engineering expertise with client-facing responsibility and delivery ownership. The role also provides a pathway into broader leadership responsibilities within a growing engineering team.
Main Responsibilities of the Principal Mechanical Engineer (Cambridge – Hybrid):
Lead the delivery of complex mechanical product development projects from concept through to prototyping and validation
Provide technical leadership across multidisciplinary engineering teams
Develop innovative mechanical design solutions for regulated medical and industrial applications
Produce and review detailed mechanical designs with a strong focus on design for manufacture and assembly
Build and test prototypes, including hands-on laboratory and workshop-based development work
Design and develop test rigs and experimental validation setups
Act as the primary technical interface for clients, presenting design concepts, progress updates and technical findings
Translate customer requirements into practical engineering solutions and project deliverables
Manage project scope, timelines and budgets across multiple concurrent programmes
Mentor and support the development of junior and mid-level engineers
Contribute to client engagement and support the development of new project opportunities through technical input
Requirements of the Principal Mechanical Engineer(Cambridge – Hybrid):
Significant mechanical engineering experience (typically 10+ years) in product development or consultancy environments
Strong track record of delivering mechanical engineering projects from concept to manufacture
Experience leading technical projects and multidisciplinary engineering teams
Strong client-facing capability, including presentations and technical discussions
Proven ability to manage project timelines, budgets and delivery expectations
Hands-on engineering capability with experience in prototyping and testing
Experience working within regulated industries such as medical devices, aerospace, defence or automotive
Strong engineering fundamentals with excellent problem-solving ability
Degree in Mechanical Engineering or related discipline
Desirable:
Experience within medical device or medical technology development
Exposure to SOLIDWORKS or similar CAD tools
Experience in consultancy or contract product development environments
Familiarity with design for manufacture and regulated product development processes
To apply for this Principal Mechanical Engineer role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com
01582 878 830....Read more...
Medical Devices Consultant – Senior Mechanical Engineer – Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role. The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology. Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties. Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices. Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required. However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector. Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly. The organisation is open to candidates with varying levels of experience. If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
You will begin by learning CAD skills, which are the basis of all the construction designs we do.
You will work alongside experienced technicians and engineers to develop your knowledge of building engineering.
You will translate civil engineers’ and architects’ designs into technical drawings, taking into account elements such as environmental features and utilities, making decisions and recommendations as to how these are dealt with.
You will communicate with clients, suppliers and colleagues as part of this process.
As your skills develop, you will then start to be involved in engineering design, working towards designing independently.
You will be supported all along with on-the-job training and mentoring from our team of experienced, industry-leading professionals at our office in Henley.
Training:You will join as an apprentice engineer and start your degree in September 2026. Through this Level 6 degree apprenticeship, you will gain a BEng in Civil Engineering from the University of West London. Apprentices without level 2 English and maths will need to achieve this level prior to taking the end-point assessment. Attending university 1 day a week for 4 years at no cost to you. You’ll be working in the office in Henley for the other 4 days of the week and earning a salary.
NOTE: Candidates must currently live within a practical daily travelling distance of the office in Henley to be considered for the position.
We will be moving to an office in Maidenhead at the end of 2026. Training Outcome:Once you have successfully completed your degree, you will be appointed as a Graduate Civil or Structural Engineer. From there, you will progress to managing your own projects as a Civil or Structural Engineer, and the next step is to manage your own team of apprentices and graduates as a Senior or Principal Engineer. Employer Description:We are a well established and respected consultancy and are large enough to provide excellent career development and a friendly work environment but small enough to give you the opportunity to work in project teams side-by-side with senior staff.
We work with clients including household names such as Whitbread, Merlin Entertainments (including Legoland), Costa, JD Wetherspoon, Soho House, Taylor Wimpey and Galliard so you'll get a wide variety of experience as you launch your career.Working Hours :Monday to Friday, 9.00am to 5.30pm, with one hour unpaid for lunch. One of these days per week will be spent at university.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Number skills....Read more...
Why Join This Team?
This isnt just another engineering firmits a place where innovators, mentors, and forwardâthinking designers shape the future of highâperformance environments. Their Pathway to Leadership program gives every team member a transparent, personalised roadmap for career growth, empowering them to rise in the direction that inspires them most.
A Culture People Love
This company offers the kind of culture professionals actively look for:
- A genuinely fun, supportive workplace
- True workâlife balance
- Generous personal development opportunities
- Access to advanced, cuttingâedge technology
- Strong, collaborative relationships
Team members work alongside some of the industrys most respected MEP expertsleaders who help them carve out a thriving longâterm career. Their projects span the globe, powered by steady growth and the creativity of people who love what they do.
Core Values
These values arent just posters on a wallthey guide every decision and interaction. They are:
- Conscientious
- Empowered
- Respectful
- Resilient
- Transformative
The Opportunity: Senior Electrical Design Engineer
The Senior Electrical Design Engineer will step in as a discipline leader, taking ownership across multiple largeâscale projects. Key responsibilities include:
- Leading complex MEP projects across healthcare, education, commercial, biotech, transportation, and other industries
- Designing advanced and innovative electrical systems
- Meeting and advising clients
- Guiding and mentoring design staff
- Supporting project management alongside MEP leadership teams
What Theyre Looking For
Required
- BSEE
- 7+ years of MEP design/consulting experience
- Proven team leadership or management experience
- Project management background within the MEP field
- Healthcare building design + HCAI compliance experience
- Strong clientâfacing energy and communication skills
- Full understanding of building codes
- Broad and deep design systems knowledge
Preferred
- Professional Engineering License (or equivalent experience)
- PMP Certification
- LEED Accreditation
- CAD and REVIT experience
What Candidates Will Love
- Employee Ownership: Build longâterm wealth through an ESOP
- Comprehensive Benefits: 401(k), medical, dental, vision, life & disability, commuter benefits, and more
- Generous Time Off: PTO, paid holidays, and companyâwide closure from Christmas to New Years
- PurposeâDriven Values: Paid volunteer time and a commitment to social equity
- Unmatched Career Development: Work with industry leaders and access continuous learning to grow into leadership roles....Read more...
Assisting those personnel at Inspection Engineer level and above in performing NDT on a wide range of Marine and land-based assets
Corrosion mapping utilising complex ultrasonic and electromagnetic methods
Modelling of inspection data
Work as part of a project team to produce detailed, technical inspection reports
Assisting in failure investigations
Assist in equipment functionality checks & calibrations
Perform any assigned tasks with due diligence regarding Brookes Bell’s integrated quality management systems
Training:Non-destructive Technologies Technician Level 3.
The apprenticeship programme is designed to gain skills and technical expertise to become a certified NDT Technician in three NDT Methods. This includes health and safety training, 1-to-1 mentoring, seminars, practical work experience sessions, and on-the-job training.
The candidates will keep records of their learning and experience throughout the programme and create an improvement plan.
On successful completion of the apprenticeship scheme, further PCN qualifications may be gained. Training Outcome:Upon completion of the apprenticeship and satisfactory performance in the role the individual will be promoted to be an Inspection Engineer in the following January or July.
Career Progression in the years following is determined by meeting relevant targets. Promotion applications are accepted twice a year in July and January.Employer Description:Brookes Bell provides multidisciplinary technical and scientific consultancy to the maritime and energy industries.
The Lab provides services in forensic engineering analysis, investigation and testing including NDT.
The NDT department specialises in advanced electromagnetic testing and ultrasonic testing, working for clients such as the Royal Navy, MOD and a wide range of commercial entities.Working Hours :Monday to Friday, 9.00am - 5.30pm.
1-hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Problem solving skills,Team working,Initiative,Writing Skills,CAD & 3D modelling Software....Read more...
An exciting opportunity has arisen for an experienced Hardware Engineer to join a fast-paced, multi-disciplinary team designing and delivering secure digital hardware solutions.
This is a hands-on role covering the full development lifecycle, from concept and design through to testing, production support, and customer integration.
What Youll Do
- Take ownership of hardware design and delivery across the entire product lifecycle.
- Specify and design high-speed digital boards for products and test equipment.
- Create, build, and test development and production test equipment.
- Capture schematics and support PCB layout activities.
- Collaborate closely with Mechanical, Software, and Systems engineers to ensure seamless integration.
- Perform hardware design verification and support system/software testing.
- Produce development and production test processes and documentation.
- Provide production support, including resolving test and manufacturing issues and training production staff.
- Address design changes, component obsolescence, and integration of secure data products into customer platforms.
What Were Looking For
- Degree in Electronic Engineering or a related discipline.
- Full hardware development lifecycle experience with a strong grasp of electronic design fundamentals.
- Proven track record in high-speed digital circuit development and signal integrity.
- Skilled in hardware testing and troubleshooting using oscilloscopes, logic analysers, and similar tools.
- Proficiency with industry-standard CAD tools (e.g., Cadence or Mentor schematic/layout).
- Must be a UK national and able to obtain UK Security Clearance (SC).
This is a fantastic opportunity to work on innovative, secure hardware technologies, contributing to projects with real-world impact while developing your expertise in a collaborative and forward-thinking engineering environment.
TT....Read more...
Why Join This Team?This isn’t just another engineering firm—it’s a place where innovators, mentors, and forward‑thinking designers shape the future of high‑performance environments. Their Pathway to Leadership program gives every team member a transparent, personalised roadmap for career growth, empowering them to rise in the direction that inspires them most.A Culture People LoveThis company offers the kind of culture professionals actively look for:A genuinely fun, supportive workplaceTrue work‑life balanceGenerous personal development opportunitiesAccess to advanced, cutting‑edge technologyStrong, collaborative relationshipsTeam members work alongside some of the industry’s most respected MEP experts—leaders who help them carve out a thriving long‑term career. Their projects span the globe, powered by steady growth and the creativity of people who love what they do.Core ValuesThese values aren’t just posters on a wall—they guide every decision and interaction. They are:ConscientiousEmpoweredRespectfulResilientTransformativeThe Opportunity: Senior Electrical Design EngineerThe Senior Electrical Design Engineer will step in as a discipline leader, taking ownership across multiple large‑scale projects. Key responsibilities include:Leading complex MEP projects across healthcare, education, commercial, biotech, transportation, and other industriesDesigning advanced and innovative electrical systemsMeeting and advising clientsGuiding and mentoring design staffSupporting project management alongside MEP leadership teamsWhat They’re Looking ForRequiredBSEE7+ years of MEP design/consulting experienceProven team leadership or management experienceProject management background within the MEP fieldHealthcare building design + HCAI compliance experienceStrong client‑facing energy and communication skillsFull understanding of building codesBroad and deep design systems knowledgePreferredProfessional Engineering License (or equivalent experience)PMP CertificationLEED AccreditationCAD and REVIT experienceWhat Candidates Will LoveEmployee Ownership: Build long‑term wealth through an ESOPComprehensive Benefits: 401(k), medical, dental, vision, life & disability, commuter benefits, and moreGenerous Time Off: PTO, paid holidays, and company‑wide closure from Christmas to New Year’sPurpose‑Driven Values: Paid volunteer time and a commitment to social equityUnmatched Career Development: Work with industry leaders and access continuous learning to grow into leadership roles....Read more...
We are looking for an enthusiastic Mechanical Engineer to join our team specializing in engineering for our Cummins Components & Software in Huddersfield, West Yorkshire. During your apprenticeship with us, you will learn how a major global organisation operates, gaining the tools and exposure you will need to become an expert in the industry and power your potential!
You will study part-time at AMRC University of Sheffield in Rotherham, covering a broad range of knowledge and skills including :
Structural mechanics
Heat transfer and fluid mechanics
Wear and lubrication
CAD and CAM
Stress and strain material analysis
Control and automation
In this role, you will make an impact in the following ways:
Work closely with mechanical, electrical and software engineers to define requirements and contribute to test‑equipment designs, planning activities and system integration
Conduct mechanical design of parts, assemblies and systems using 2D and 3D CAD software packages
Read, interpret and develop test equipment schematics, diagrams, maintenance documentation and operating procedures
Procure parts and assemblies from recognised suppliers, and support the safe management of suppliers and contractors while working on site
Diagnose equipment and system faults and use problem solving to identify and drive corrective actions
Support operation of test facility infrastructure systems including fuel, compressed air, cooling water and the associated mechanical equipment, for example; pumps, control valves and heat exchangers
Follow safe systems of work and contribute to safety-improvement projects, while complying with HSE policies, procedures and relevant regulations
To be successful in this role you will need the following:
GCSEs including Math’s/Science at Grade 5/B, 4 other subjects at 4/C or above
A minimum of 2 A-Levels at grade B or above, which must include mathematics or further mathematics and of the following: Physics, biology, chemistry or engineering
Level 3 Btec extended diploma engineering course (minimum DM) (120 Credits needed)
Must have been a UK resident for 3 years or above
BTEC level 4 HNC (Distinction)
BTEC level 5 HND (Distinction)
A genuine strong interest in engineering or science.
Why Cummins?
As an apprentice at Cummins, you will have the chance to develop your skills and knowledge in a supportive and dynamic environment. Our program is designed to provide a comprehensive learning experience that prepares you for a successful career in the industry.Training:During the apprenticeship you will work 5 days per week, inclusive of 1 day per week for study at AMRC (Advanced Manufacturing Research Centre) – University of Sheffield. The working hours are 37.5 hours per week and 8:30am to 4:30pm covering core hours but flexible to suit business needs.Training Outcome:Possibility of a potential permanent employment through open vacancies.Employer Description:Cummins Turbo Technologies is the only manufacturer focused solely on medium- to heavy-duty diesel engine turbo technologies. For more than 60 years, we have delivered innovative, reliable turbocharger solutions for our customers. Our vision for turbocharger solutions, thanks to our rich company heritage derived from our Holset® brand, sets us apart as a technology leader.Working Hours :During the apprenticeship you will work 5 days per week, The working hours are 37.5 hours per week and 8:30am to 4:30pm covering core hours but flexible to suit business needs.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Civil Engineering involves not only the setting out of a project and the foundation, but also the RC framework and concrete formworks.
This role is based on site and in the office, using setting out equipment and design software, while also learning to manage the package on site including costings and staff.
Further tasks may include:
Assisting with site investigations, the worth and potential risks of projects
Developing blueprints using computer-aided design (CAD); Using computer modelling software to analyse surveys and mapping data
Liaising with architects, subcontractors, consultants, co-workers and clients
Ensuring projects meet legal requirements, monitoring progress, and health and safety standards are being met
Resolving design and development problems, including environmental impact and potential risk
Managing budgets and other project resources; preparing project bids and reports
Reviewing and managing costs such as labour timesheets, plant claims and costings, material claim and costings, and supporting full package cost audits
Training:
Apprentices without level 2 English and maths will need to achieve this level prior to taking the end-point assessment
Training Outcome:
On completion of this apprenticeship, you can work as a qualified Asst. Civil/Setting Out Engineer. With more experience, you can look to progress into a senior position, management, self-employment, or business owner
On completion of this apprenticeship, you will be eligible for a CSCS Supervisor (Gold) Card
Employer Description:Evolve is a not-for-profit organisation that manages the CITB Shared Apprenticeship Scheme within London. In other terms, we offer construction apprenticeships!Working Hours :Monday-Friday. Minimum of 35 hours per week but the potential for more. Approx. 8.00am - 5.00pm but hours will be confirmed by the contractor after successfully passing the Stage 1 & 2 Interview.Skills: Attention to detail,Communication skills,CSCS card,IT skills,Organisation skills,Physical fitness,Presentation skills....Read more...
Civil Engineering involves not only the setting out of a project and the foundation, but also the RC framework and concrete formworks. This role is based on site and in the office, using setting out equipment and design software, while also learning to manage the package on site, including costings and staff. Further tasks may include:• Assisting with site investigations, the worth and potential risks of projects• Developing blueprints using computer-aided design (CAD); Using computer modelling software to analyse surveys and mapping data• Liaising with architects, subcontractors, consultants, co-workers and clients• Ensuring projects meet legal requirements, monitoring progress, and health and safety standards are being met• Resolving design and development problems, including environmental impact and potential risk• Managing budgets and other project resources; preparing project bids and reports• Reviewing and managing costs such as labour timesheets, plant claims and costings, material claims and costings, and supporting full package cost auditsTraining:Apprentices without level 2 English and maths will need to achieve this level prior to taking the end-point assessment.Training Outcome:On completion of this apprenticeship, you can work as a qualified Asst. Civil/Setting Out Engineer. With more experience, you can look to progress into a senior position, management, self-employment, or business owner. On completion of this apprenticeship, you will be eligible for a CSCS Supervisor (Gold) Card.Employer Description:Evolve is a not-for-profit organisation that manages the CITB Shared Apprenticeship Scheme within London. In other terms, we offer construction apprenticeships!Working Hours :Monday-Friday. Minimum of 35 hours per week, but the potential for more. Approx. 8 am-5 pm, but hours will be confirmed by the contractor after successfully passing the Stage 1 & 2 Interview.Skills: Attention to detail,Communication skills,CSCS card,IT skills,Organisation skills,Physical fitness,Presentation skills....Read more...
An incredible opportunity has arisen to join Proteus Facades as an Apprentice CAD Engineer. Proteus delivers projects all over the world under some of the most challenging logistical circumstances.
This apprenticeship is for anyone looking to start a career in facades and structural metalwork detailing, you will learn about modelling/detailing; co-ordination between work packages; onsite buildability and construction methods. You will be developing skills that will put you at the leading edge of modern construction techniques.
You will be responsible for:
Preparing detailed engineering designs for structural metalwork
Producing technical drawings and schedules
Working with clients and contractor partners
Assisting with the development of 3D Revit models to contract design information and deadlines
Utilising various methods of communication as and when required.Training:
2 ½ Year Apprenticeship Programme
Design and Draughting Skills, Knowledge & Behaviours - delivered in the workplace
Level 3 BTEC in Construction and the Built Environment - Day Release or Remote Delivery (Optional qualification)
Specialist Training Programme Blocks of your choice
End Point Assessment - Knowledge Test, Practical Test and Presentation/Interview
Training Outcome:Once you have completed your apprenticeship, you will have the chance to work as a qualified digital engineering technician if you are the right candidate for the role, which in turn can lead on to design office manager or other senior level roles within the organisation.Employer Description:Proteus Facades Ltd is a manufacturer based at a state-of-the-art production facility in Skelmersdale. All of their systems are manufactured to the highest quality standards, using the highest quality materials. Proteus is the leading designer and manufacturer, and they provide a diverse range of standard and bespoke engineered façade systems including bonded honeycomb panels, architectural expanded mesh, perforated and embossed metal cladding, shingles, louvres, brise soleil and fabrications. Proteus has a worldwide reach with experience delivering complex façade packages under the most challenging of logistical circumstances and with some of the most reputable contractors in the building façade sector.Working Hours :Monday - Thursday between 8.00am - 5.00pm. Friday, 8.00am-3.00pm.Skills: IT skills,Attention to detail,Problem solving skills,Number skills....Read more...
Your training and responsibilities as an Apprentice Fabricator/Welder, will include (but not be limited to) the following:
Carry out welding activities including use of a MIG/TIG welder, and other ancillary machinery and equipment
Accurately interpret CAD/technical drawings
Accurately follow job cards and update accordingly
Ensure correct marking up of component parts
Weld joints in accordance with approved welding procedures and quality requirements
Undertake final inspections of finished components
Maintain a clean, organised and productive work area for colleagues and yourself
When trained, ensure job timings are met/exceeded
You’ll learn side-by-side with experienced engineers who are passionate about sharing their knowledge, giving you hands-on exposure to a wide range of tasks and a real understanding of how the whole business operates. With dedicated mentoring and support, you’ll build confidence, develop in-demand skills, and lay strong foundations for a long-term career in engineering.
If you’re motivated, eager to learn, and ready to take your first step into engineering with a supportive business, apply now. This opportunity at Transdek will be highly sought after- don’t miss your chance to get started.Training:The successful candidate will continue their studies with apprenticeship specialists, RNN Group at their Worksop campus on a day release format, giving you the training and support you need to become an all-rounded and successful Engineer.Training Outcome:
Further industry and business appropriate training, including becoming a coded welder
A lifelong career with progression opportunities with Transdek UK Ltd
Employer Description:Transdek supply a range of modular solutions, developed since 1997 to give customers the fastest, safest, most versatile and cost-effective loading operations. All their products are CE-marked and UK-built for a lifetime of reliable service.
They are all about creating and building products that provide concrete benefits for customers, as well as a lifetime of reliable operation.
Transdek are extremely keen on utilising the apprenticeship scheme to solidify their workforce. They have extremely experience team members who are excited to engage the next generation of engineers.Working Hours :Monday to Thursday 07:30 to 16:00 and Friday 07:30 to 14:00Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Good attitude to work,Ability to prioritise workload,Work under pressure....Read more...
