Building Services Maintenance Jobs Found 259 Jobs, Page 11 of 11 Pages Sort by:
Continuous Improvement Engineer
JOB DESCRIPTION Position Summary: Carboline is seeking a Continuous Improvement Engineer, located at our Green Bay, WI facility. This position will provide support for plant operations including managing Continuous Improvement Process and Production Process Control. Minimum Requirements: 4 years Chemistry, Engineering degree or equivalent experience, minimum 3 years' experience. Formal training in Lean and/or Six Sigma methodologies. Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules. Ability to use a computer for all company required processes, procedures, and trainings. Essential Functions: Experience in identification and implementation of process optimization solutions. Understanding of Lean Manufacturing/Continuous Improvement methodologies and ability to teach and model them. Investigating shortfalls, issues, and complaints in current business processes. Ability to influence, mentor, and coach to get results through others. Collaborates with operations manager and/or plant engineering on modification of equipment and processes to reduce cost and improve efficiency and quality. Works together with R&D, engineering, and plant resources to develop and implement continuous improvement projects. Monitors and collaborates with R&D where necessary to modify production processes for existing products to improve consistency, quality, and reduce cost. Collaborates with R&D on process development - Including reviewing and approving proposed manufacturing procedures for new products. Monitors plant operating metrics to identify and implement corrective actions that positively impact cost, quality, and cycle time problem areas. Provides technical support and consultation to the Quality Control department. Specifically, regarding recovery plans for off-specification, obsolete, and problem finished goods. Monitors the consistency of production using SQC, SPC, or other appropriate techniques. Strong communicator with top-notch presentation skills who can develop and provide training to production personnel on matters concerning formulation, materials handling, processing, and quality procedures. Committed to the Company's safety and quality programs. Take an active role in hazard recognition and injury prevention by following all safety rules & regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Leadership role in effort to recertify and reclaim Non-Conforming material. Works in coordination with QC and R&D to isolate, test and recertify Non-Conforming material that can be repackaged and sold. Perform additional duties as assigned. Commit to the Company's safety and quality programs. Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you. What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
PMO Analyst, Lead/Enterprise
Are you an experienced PMO Analyst, driven to deliver, and looking to operate in an Enterprise or Lead capacity? Have you supported a portfolio of change that has included ERP projects, PPM delivery or taking ownership of the creation of new systems or processes? Let Informed Recruitment help you to achieve your potential with an exciting consultancy opportunity for a PMO Analyst to aid the ongoing maturity of a change and transformation function. As a specialist provider of resource to the Property & Associated Technology markets, we are delighted to be partnering with a social enterprise offering you the opportunity to make a difference and gain experience as part of a modern digital environment within a company that is investing and developing within itself and its employees. The purpose of the role will be to support a change and transformation portfolio by analysis and providing performance related data whilst driving value via PPM tools. Your day-to-day responsibilities will include providing analytical skills to aid and inform portfolio planning and management; building robust resource models and to facilitate supply and demand planning; analyse and provide MI reports on performance across all areas of the portfolio and project; continuously improve PPM to improve efficiency; lead on capacity planning; portfolio view of plans maintenance and variation tracking; and information pack production. Must Have Commercial PMO Analyst experience, providing analytical services within a PMO that supports a large, complex portfolio of technical and business change projects. Project management tools, life cycle, delivery, methodology, and systems. Project documentation, standards and processes experience. Delivery driven, and the capacity to build relartionships and engage with senior stakeholders. Previous experience of using and improving PPM tools such as Planview, Clarity, Clarizen, Primavera or similar. You will be able to work under pressure in an environment with a constant changes and operational demands. MS Project & Excel. Nice to Have Experience in the use of delivery and collaboration tools such TFS/DevOps, JIRA, Confluence, SharePoint, MS Teams, Zoom, Skype, etc. Professional certification, such as PRINCE2 Foundation, APMP Foundation and/or P3O Foundation. Experience of working on or within ERP transformations. As an individual you will experience in providing constructive challenge, positively and with assertion to colleagues and stakeholders. You will have exceptional organisational and facilitation skills, and a proven track record of analytical and research experience. You will be motivated, self-disciplined, and eager to contribute. Alongside a competitive salary you will receive an impressive benefits package that includes generous leave entitlement, health cover, professional development, and qualification support. This role will be then split between one or two days in the office in Manchester, with the rest of time working from home. If this role describes you then please apply without delay for the opportunity to continue your career with a friendly, customer focused organisation. Informed Recruitment Limited acts as an Employment Agency in respect to this vacancy as defined by the Employment Agencies Act. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, national origin, disability status, or any other basis protected by appropriate law. All hiring decisions are made based on merit, competence, and business need. As defined under the General Data Protection Regulation (GDPR), Informed Recruitment is a Data Controller and a Data Processor, and our legal basis for processing your personal data is 'Legitimate Interests’. You have the right to object to us processing your data in this way. For more information about this, your rights, and our approach to Data Protection and Privacy, please visit our website. ....Read more...
Continuous Improvement Leader (Sr)
JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: This Senior Continuous Improvement Leader will drive and execute continuous improvement efforts at the manufacturing plant level across multiple facilities in the organization by collaborating with plant personnel to promote, improve and maintain our operational excellence systems (ex: MS168) in alignment with corporate strategy and site-specific goals. The Senior Continuous Improvement Leader will be required to leverage available data, Six Sigma projects, and other lean tools to deliver effective initiatives across the organization to positively impact the business. ESSENTIAL DUTIES AND RESPONSIBILITIES: Collaborate with the manufacturing sites as well as corporate functions/departments to determine where the most significant areas of improvement exist and develop projects from those opportunities. Develop, prioritize, and execute continuous improvement initiatives aligned with the organization's goals and plant objectives. Assess, monitor, maintain, and enhance business performance by analyzing current practices, developing business process improvements (ex.: removing waste, reducing cost, etc.), implementing changes in workflows, structures, and teams to ensure continuous company performance. Plan, facilitate, and execute continuous improvement events using Lean Six Sigma tools, provide support for plant level initiatives, and participate in Kaizen events on the production floor in support of Tremco's MS168 philosophies. Provide support to the production staff to ensure that implemented lean principles are understood and implement change management strategies to ensure successful adoption of process improvements. Lead cross functional work teams focused on identifying root causes and implementing corrective actions to provide sustainable improvements that meet/exceed expectations. Conduct semi-annual audits. Read, research, interpret, and analyze data on current processes, safety rules, operating and maintenance instructions, and procedure manuals. Leverage knowledge of tiered governance systems, Kaizen, 5S, visual management and SMED to assist sites in improving efficiencies by evaluating process and practice from various perspectives. Influence and motivate others to attend to, participate in and own local continuous improvement efforts and initiatives. Lead cross-functional improvement projects, ensuring projects are completed on time, within budget, and meet predefined objectives. Develop, monitor, and communicate project plans, timelines, and budgets with key stakeholders. Provide supportive project management expertise including MPST and monthly savings tracking, key performance indicators, and reporting. Teach, lead, and coach cross-functional teams on Lean Six Sigma tools and methodologies. Use data analytics such as statistical process control, process capability analysis, and correlation to make data driven decisions while demonstrating quantitative improvement/impact. Prepare, review, and analyze operational data, reports, and metrics to generate insights, identify trends, isolate bottlenecks, and make informed decisions. Build a culture of continuous improvement by promoting awareness and buy-in at all levels of the organization. Develop and maintain comprehensive performance dashboards and reports. Stay current with industry best practices, emerging trends, and technologies related to continuous improvement and benchmark against industry peers and incorporate best practices into the organization. EDUCATION REQUIREMENT: Bachelor's /University degree, Chemical or Mechanical Engineering preferred. EXPERIENCE REQUIREMENT: Previous experience in a manufacturing environment Preferred experience in chemical manufacturing and/or batch manufacturing operations. Previous experience utilizing Data, Statistical Analysis, Six Sigma, and/or Lean Methodologies Five years' experience in process optimization, operations, or business management. Experience developing employee training programs CERTIFICATES, LICENSES, REGISTRATIONS: Preferred Lean Six Sigma Green Belt or higher certification OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: This is a hands-on position that requires you to be on-site at our various manufacturing plants. Travel to other plants is required. A strategic and analytical mindset with the ability to think dynamically to solve problems. A keen eye for identifying strategic opportunities in processes and organizational structures. Proficiency with process evaluation techniques, data analysis, and visualization tools. Strong working knowledge of Microsoft Suite, including advanced skills with Excel. Demonstrated ability to work collaboratively with cross-functional teams, from operators up to plant management. Effective communication, interpersonal, presentation, facilitation, and training skills, with the ability to influence, motivate, and inspire change. Passionate about safety, quality, and productivity with the ability to perform root cause analysis. Demonstrated ability to work in high paced and changing environments. Ability to roll-up sleeves and lead by example at both strategic and tactical levels. Experience with Power Automate, Power Query, PowerBI, and Forms is a plus. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The hourly rate/salary range for applicants in this position generally ranges between $87,991 and $109,989 plus 15% bonus opportunity. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Environmental, Health & Safety Specialist
JOB DESCRIPTION DAP is looking to hire EH&S Specialist for the Pacific, Mo Plant. The EH&S Specialist job functions include but not limited to implementation and maintenance of environment, health, and safety programs at DAP's Facilities Pacific, MO. Identify, develop and implement plant safety directives in conjunction with Legal, HR and Operations departments. Assist facilities with; compliance obligations, develop and manage implementation of directives, coordination of worker's compensation objectives, audit and assist in correction of all deficiencies of facilities for adherence to compliance objectives and directives, lead PSM/PHA compliance, assist with facility required inspections and investigations, and travel to assist other facilities will be required. Responsibilities Identify and Communicate Compliance ObligationsMonitor regulatory developments in environment/health/safety area for new/revised compliance obligations, areas of potential risk/liability, and advise plant leadership regarding these issues. Assist with development of health/safety compliance strategies in conjunction with corporate directives. Develop/distribute plain language health/safety compliance requirement directives to plant mgmt. in conjunction with the above group. Network with industry peers, via participation in trade associations and seminars. Act in a Leadership Role with Plant Personnel in Fulfilling Health/Safety Compliance ObligationsProvide direction, review and oversee all safety systems. Identify, communicate and assist in the development of Best Practices for injury prevention. Ensure reporting/record-keeping is complete, accurate and timely per OSHA and state agency requirements, insurer's requirements and DAP mandated requirements. Prepare and/or approve employee training materials on health/safety, conduct training where plant resources are inadequate, or where centralized training responsibility is appropriate. Develop and maintain plant PSM/PHA/RMP activitiesLead the efforts in Process Safety Management (PSM), Process Hazard Analysis (PHA) and Risk Management Plan (RMP) compliance and addressing shortfalls. Review new, continuous improvement projects for requirements related to PHA/PSM requirements. Ensure Adherence to Safety Compliance Obligations and DirectivesConduct monthly issue review sessions with Corporate EH&S and Plant Managers to assure facility stay in compliance and maintain safety performance objectives. Conduct and Manage Incident Analysis ProgramLead, assist and maintain incident reporting procedures to DAP Corporate and RPM. Evaluate trends in incidents. Recommend corrective actions to minimize/eliminate undesirable trends. Incorporate accident prevention programs into safety directive. Maintain Environmental reporting requirementsKeep accurate records on plant emission calculations to maintain monthly, quarterly, and yearly reporting submission requirements. Assure plants stay in compliance with required external and internal reporting requirements. Working knowledge of TRI, Tier II, SPCC and SWPPP is requested. Requirements: EHS Degree preferred. Bachelor's degree in environmental health & safety or similar field. 3+ years of relevant experience. Computer software familiarity. Working knowledge of state and federal regulations. Experience in research skills. Certified Safety Professional preferred About DAP DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/ DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Inside Sales Support Coordinator
JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America GENERAL PURPOSE OF THE JOB: The Inside Sales Support Coordinator provides sales coordination to the assigned Division's field sales team. While directly reporting to the Divisional Sales Director, a dotted line exists to the Regional Managers within the Division. This position will perform a full range of sales support activities including, but not limited to, project activity tracking, reporting, Sales Force support, event coordination, special price requests, lead generation follow-up, and other support duties. This position's duties will be in line with the Division needs to maximize the effectiveness of the Division's sales team. This will be accomplished through minimizing tasks and obstacles that allow the team the ability to maximize their time focusing on in-field selling. ESSENTIAL DUTIES AND RESPONSIBILITIES: Coordinate with the Division Sales team to ensure consistent and proper utilization of Salesforce.com for sales and technical representatives (i.e. new companies, new contacts, new opportunities, and call/activity logs) - daily Become a Power User of Salesforce within the Division team; facilitate onboarding new employees on Salesforce with training and support as needed. Cultivate cold leads through use of Dodge, SpecShare etc. and develop into warm, qualified leads then disseminate to field sales representatives with defined actionable activity through Salesforce.com. Handle online submission of complaints from the field and work with customer service and technical service departments to ensure resolution is complete. Coordinate details of Qualified Applicator Program (QAP) trainings within the market by handling supplies, products, and meeting site logistics; collaborate with Marketing Communications team for Trade Show coordination. Manage certified applicators such as QAP program, certificate renewals, approved applicator info required for jurisdictions. Submit special price and color requests daily using established Tremco processes. Coordinate the generation of project specific specifications, details, warranties and substitution requests and delivery of the articles to the field sales representative. Track expiration of region-specific third-party approvals and coordinate renewals with the technical service group (for example COLA, Notice of Acceptances (NOAs), etc.) Order samples and literature for customers as requested. Send project support information to customers such as Application Instructions, common details, sample warranties, technical bulletins, brochures, approved applicator certificates, etc. Organize and coordinate meetings/events within the Division Collect and combine collaborative activity documentation such as project tracking/activities with USG and other cross segment collaboration (i.e. Roofing, TBS, Dryvit, Nudura, Euclid, CS&W partnering with each other). Maintain shared drive/site with relevant Regional information to support the field sales representatives. Provide sales reports to Regional Manager and Divisional Sales Director as requested EDUCATION: Associate's Degree in Business, Sales, or Administration is preferred. Minimum High School Diploma or GED. EXPERIENCE: 2-4 years of general administrative or project management experience required. Previous general sales support experience preferred OTHER SKILLS AND ABILITIES: Strong written and verbal communication skills Strong proficiency in Microsoft Office and experience with reporting and data analysis Team player with the ability to work independently Basic business/technical writing skills preferred Strong organizational and time-management skills Ability to travel as needed Salesforce.com experience is a plus Must be able to work during operating hours of assigned territory; hours may vary based on business needs PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally starts at $58 to 65K and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
BIM Specialist
JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The BIM Specialist is responsible for transforming conceptual layouts to fully installable models that fully integrate into wall system/panel projects and designs by creating structures, objects, and families. By leveraging a variety of three-dimensional computer assisted design modeling software, the BIM Specialist will support senior modelers and project teams and promote the best tools and system framework for each project with required configurations and deployments. May lead discipline specific BIM modeling content for design projects. ESSENTIAL DUTIES & RESPONSIBILITIES: List the job's essential functions or key responsibilities from most important or time-consuming to least (daily, weekly, monthly, annually or another regular/irregular interval) Maintain and develop BIM-related content for the Texas Panel Plant. Create models using Autodesk Revit. Create project specific 2D and 3D drawings and models for project submittals, special projects, bid packages, and product manufacturing (i.e. panel tickets). Coordinate and assist with any addendum, request for information, change proposal requests and change orders; make necessary revisions to existing drawings. Prepare final drawings based on prior work examples and input from designers and/or engineers. Establish, implement, and maintain quality control procedures. Document BIM standards, processes, procedures, and workflows to ensure consistency and quality across projects. Identify and resolve clashes, conflicts, and discrepancies within BIM models to ensure smooth coordination between various disciplines. Collaborate across functions to ensure accurate and timely designs in accordance with established budgets and estimates. Prioritize all work in accordance with project deadlines. Maintain and improve knowledge of drafting techniques, standards, practices, and engineering procedures as well as new and emerging technologies and best practices impacting digital design to enhance productivity and efficiency as well as profits. Manage the implementation of supporting software applications for BIM and project delivery. EDUCATION & EXPERIENCE: Bachelor's Degree or similar in Design, CAD, Engineering, architecture, or related field. Minimum 2 years experience as a modelling practitioner working with project engineers or managers. Demonstrated knowledge, proficiency, and use of Autodesk tools and systems such as Civil3D, Revit, 3D Studio Max/Stingray, AutoCAD 2017 (or newer), AutoDesk 3DS Max (or newer) and InfraWorks. OTHER SKILLS, ABILITIES & QUALIFICATIONS: Demonstrated ability to develop BIM drawings from verbal instructions, preliminary layouts, sketches, and project standards. Dedication to personal professional growth and education. Knowledge and appreciation for best performance in model-based design (BIM) protocols, standards, and software (Revit, AutoCAD 2010, Autodesk 3DS MAX) Ability to read and work from architectural and other construction-related plans to produce structural construction documents. Proficient use of Microsoft Office programs (Excel, Word and PowerPoint) Ability to prioritize, meet deadlines, and manage multiple projects simultaneously. Self-motivated and quick learner with the ability to accept feedback. Effective communication and interpersonal skills for collaborating with multidisciplinary teams and clients. Ability to identify and resolve potential problems by timely gathering and analyzing information Demonstrate positive team attitude and interpersonal effectiveness. Ability to follow detailed procedures to ensure accuracy of work. Inclination to be a team player who shares key information with others involved in a project and with colleagues. Ability to set high standards and demonstrate excellence, ensuring quality in every aspect of work performed. Takes personal responsibility and ownership of one's work and self-initiates corrective action when needed. PHYSICAL DEMANDS: Incumbent must be able to stand, sit, walk, use hands, reach, climb, talk, and hear. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $52,000 and $66,000 This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Foreman - Façade
JOB DESCRIPTION GENERAL JOB DESCRIPTION: WTI Commercial Façade Foreman is responsible for the oversite and performance of safety, efficiency, and quality of the WTI Commercial Building Envelope business. Safety is our number one priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the WTI Foreman is focused on safety, crew management, and efficient execution of all WTI Projects assigned to them. Travel will be required. It is the responsibility of the WTI Commercial Foreman to deliver timely and the highest quality service to all our WTI customers. ESSENTIAL DUTIES AND RESPONSIBILITIES: Actively administers and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property. This includes responsibility for conducting safety meetings, complying with governmental regulations, reporting and investigating accidents, and planning site-specific job safety procedures, including: Conduct the daily onsite safety brief prior to the start of the WTI project with all onsite project personnel (Sales Rep, Customer, WTI Supt & Crew, etc.). Inspect and ensure the safety of surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Ensure all project communication is completed prior to the start of any WTI project. This includes but is not limited to communication with: Sales Rep on weekly/daily schedule WTI crew members to discuss the scope of work and daily tasks The customer prior to arrival, upon arrival, and upon completion of daily work WTI Supervisor on safety, schedule changes, project and crew updates, etc. Efficient project management includes managing crew start and end times and production rates and ensuring tools and materials are available to safely and efficiently complete the assigned project. Complete the project per the scope of work, design, and specification of contract & engineering documents. Complete an end-of-day and/or end-of-project walk-through to ensure quality repairs and address any items prior to leaving the job site. Before and after pictures will be sent to the Sales Rep, and information will be included in daily project status reports. These items will include detailed work performed updates, materials consumed, and supplies purchases, which are all recorded daily. Supervises, directs, and coordinates the scheduling and execution of projects in assigned areas. This responsibility includes job start-up, job execution in accordance with contract specifications, job shut-down, and manpower scheduling, all consistent with the planned costs of the job. Manages field personnel, including, but not limited to, recruiting, hiring, training, motivating, and retaining the quality and number of production personnel needed to meet operating demands. This responsibility also includes laying off personnel, disciplinary action, employee assistance, and handling union matters relative to employees. Ensure that all WTI Field Labor will have a professional appearance and customer interaction while completing services for a customer. Responsible for tracking and monitoring project inventory. Maintains the highest quality on-site customer relations in projecting a positive image. Has knowledge/understanding and assures assigned projects comply with all governmental rules and regulations affecting work sites and employees, i.e. OSHA, DOT, EEO/Affirmative Action, EPA, Wage and Hour, etc. Manage, monitor, and document the performance of WTI Commercial Field Labor and take appropriate steps or corrective measures to resolve employee and work-related issues. Consult with the WTI Commercial Supervisor and Human Resources as needed. Contributes to operations by supplying accurate and timely job information, including daily job logs, job file documentation, and compiling information for billing the customer. Provides management with the earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and purchasing of company equipment, materials, tools, and other assets as assigned by the WTI Commercial Supervisor. Trains employees in proper material and equipment usage, maintenance, and storage. Coordinates and monitors the performance of on-site subcontractors, where appropriate. Perform any other duty and/or project as required or assigned by the WTI Supervisor and/or Commercial Business Manager. Maintains ethical business conduct EXPERIENCE: 5+ years of progressive experience in a similar role, including leading teams and technical solutions, training, troubleshooting, etc. Must be thoroughly familiar with standard façade construction, including masonry, EIFS, Stucco, Curtainwall, metal panels, concrete, plaster, and other forms of facade systems and how to properly repair them using Tremco CPG Materials. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status, or disability.Apply for this ad Online! ....Read more...
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The EHS manager is accountable for the development and implementation of programs in the Environmental, Health, Safety and Security areas of manufacturing. TREMCO'S EXPECTATIONS FOR ALL LEADERS: Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage. Applies the company's policies and adheres to processes to ensure compliance and organizational best practices. Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained. Constructs succession plans to ensure sustainability and continuity of area of responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES: Investigate and document adverse effects of product use on humans and the environment, for both personal and commercial applications. Communicate product usage standards to ensure safety and mitigate risks, ensuring understanding among all stakeholders. Lead and implement regulatory compliance programs in occupational health, safety, hazardous materials, environmental management, and materials transportation. Interpret regulations, develop compliant programs, and provide training across North America, focusing on legislative compliance and organizational appropriateness. Conduct safety audits, manage Environmental, Health, & Safety (EH&S) compliance statistics, and recommend annual safety program updates. Act as the primary contact with regulatory bodies, provide litigation support, and potentially serve as an expert witness. Maintain and update knowledge on EH&S regulations, particularly in hazardous materials management across various jurisdictions. Research and advise on best practices in chemical manufacturing, distribution, disposal, policy gaps, and program improvements. Prepare for legislative changes with proactive program options and contingency plans, focusing on chemical products and regulatory updates. Serve as a key resource on occupational health, safety, and environmental management policies and standards. Collaborate with Human Resources in workplace injury case management and return-to-work programs. Lead the development and implementation of EH&S compliance codes and training programs, identifying and correcting non-compliant processes. Ensure employee training and awareness in EH&S procedures, analyzing financial implications of program and regulatory changes. Establish regulatory guidelines in chemical hazard identification, safety risk assessment, and conduct ongoing compliance audits. Provide guidance to ensure operational plans are in compliance with EH&S requirements, and act as an advisory resource on regulatory compliance and best practices to the management team. EDUCATION REQUIREMENT: 4 year College or University degree in Natural Sciences (Chemistry, Engineering, Environmental Sciences, or Safety Sciences). EXPERIENCE REQUIREMENT: 4+ years' experienceleading and contributing to compliance and regulatory policy and program development in a materials processing environment. Formal training in occupational health and safety. Process Safety Management (PSM) and Class 1 Division 1 (C1D1) are highly preferred. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Certified Safety Professional preferred. Ability to travel across North America approximately 10%. Broad understanding of regulatory compliance requirements, risk assessment and mitigation programs in multiple (particularly North American) jurisdictions. Ability to inspire others to commit to and achieve EHS&S program goals and performance measures in a production environment with varying levels of literacy and educational background. Ability to develop a business case for new EHS program development/program modification. Ability to manage program administration requirements across multiple, disparate (production, distribution, warehousing, sales, and marketing) divisions. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The base range for this position is $87,000. to 110,000. plus a 15% bonus opportunity. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Foreman - Façade
JOB DESCRIPTION GENERAL DESCRIPTION OF THE JOB: The WTI Commercial Façade Foreman is responsible for the oversite and performance of safety, efficiency, and quality of the WTI Commercial Building Envelope business. Safety is our number one priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the WTI Foreman is focused on safety, crew management, and efficient execution of all WTI Projects assigned to them. Travel will be required. It is the responsibility of the WTI Commercial Foreman to deliver timely and the highest quality service to all our WTI customers. ESSENTIAL DUTIES AND RESPONSIBILITIES: Actively administers and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property. This includes responsibility for conducting safety meetings, complying with governmental regulations, reporting and investigating accidents, and planning site-specific job safety procedures, including: Conduct the daily onsite safety brief prior to the start of the WTI project with all onsite project personnel (Sales Rep, Customer, WTI Supt & Crew, etc.) Inspect and ensure the safety of surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Ensure all project communication is completed prior to the start of any WTI project. This includes but is not limited to communication with: Sales Rep on weekly/daily schedule WTI crew members to discuss the scope of work and daily tasks The customer prior to arrival, upon arrival, and upon completion of daily work WTI Supervisor on safety, schedule changes, project and crew updates, etc. Efficient project management to include managing crew start and end times, production rates, and ensuring tools and materials are available to safely and efficiently complete the assigned project. Complete the project per the scope of work, design, and specification of contract and engineering documents. Complete an end-of-day and/or end-of-project walk-through to ensure quality repairs and address any items prior to leaving the job site. Before and after pictures will be sent to the Sales Rep, and information will be included in daily project status reports. These items will include detailed work performed updates, materials consumed, and supplies purchases, which are all recorded daily. Supervises, directs, and coordinates the scheduling and execution of projects in assigned areas. This responsibility includes job start-up, job execution in accordance with contract specifications, job shutdown, and manpower scheduling, all consistent with the planned costs of the job. Manages field personnel, including, but not limited to, recruiting, hiring, training, motivating, and retaining the quality and number of production personnel needed to meet operating demands. This responsibility also includes laying off personnel, disciplinary action, employee assistance, and handling union matters relative to employees. Ensure that all WTI Field Labor will have a professional appearance and customer interaction while completing services for a customer. Responsible for tracking and monitoring project inventory. Maintains the highest quality on-site customer relations in projecting a positive image. Has knowledge/understanding and assures assigned projects comply with all governmental rules and regulations affecting work sites and employees, i.e., OSHA, DOT, EEO/Affirmative Action, EPA, Wage and Hour, etc. Manage, monitor, and document the performance of WTI Commercial Field Labor and take appropriate steps or corrective measures to resolve employee and work-related issues. Consult with the WTI Commercial Supervisor and Human Resources as needed. Contributes to operations by supplying accurate and timely job information, including daily job logs, job file documentation, and compiling information for billing the customer. Provides management with the earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and purchasing of company equipment, materials, tools, and other assets as assigned by the WTI Commercial Supervisor. Trains employees in proper material and equipment usage, maintenance, and storage. Coordinates and monitors the performance of on-site subcontractors, where appropriate. Perform any other duty and/or project as required or assigned by the WTI Supervisor and/or Commercial Business Manager. Maintains ethical business conduct EXPERIENCE: 5+ years of progressive experience in a similar role, including leading teams and technical solutions, training, troubleshooting, etc. Must be thoroughly familiar with standard façade construction, including masonry, EIFS, Stucco, Curtainwall, metal panels, concrete, plaster, and other forms of facade systems and how to properly repair them using Tremco CPG Materials. Apply for this ad Online! ....Read more...