An exciting opportunity for an apprentice to work alongside qualified Honda technicians where you will be fully trained in all aspects of maintenance and repair of cars from routine servicing to electrical fault diagnostics.
You will be an Apprentice service and diagnostic car technician in a busy workshop environment
You will carry out tasks relevant to maintaining and repairing cars
To assist qualified technicians with servicing and repairs
To observe best work practices, develop and maintain skills levels in all aspects of repair, service and maintenance of cars
To maintain a clean and safe work environment
To maintain personal standards of dress, cleanliness and hygiene, consistent with the standards laid down by the company
To be responsible for the safety of yourself and others, using protective equipment when required
To develop and maintain a thorough and current product knowledge
To ensure a consistently high level of quality and workmanship
To advise the Workshop Controller or Service Advisor of any additional work necessary on a vehicle during servicing
Assistance with any other tasks as required
Training:
Training consists of 17 weeks block training over a 3-year period with the remainder of your time being spent at a Honda retailer where practical training and guidance will be provided
You will be working towards an Advanced Motor Vehicle Service and Maintenance Technician - Light Vehicle Apprenticeship (Level 3 qualification) along with Functional Skills in maths and English at Level 2
Honda Challenge Personal Development Programme
You will also work towards Honda internal qualifications
As part of your training, you will attend our Honda Apprenticeship technical centre in Bracknell for block release training (accommodation and transport costs will be covered by your employer)
Training Outcome:
Possible career progression opportunities include Master Technician, Service or Aftersales Department Management or even Dealership Management
Employer Description:Horizon Honda has been selling and caring for vehicles for over 52 years. Our first Honda showroom opened in March 1971 in Poole. Since the Group was formed in 1971, our core values have been consistent honesty & integrity, and these have underpinned our growth, allowing us to become one of the largest private motor groups in the UK.
With over 70 years of engineering passion, Honda have a long and proud history of automotive excellence – delivering impressive performance and award winning reliability.Working Hours :Monday - Friday (occasional Saturdays), times to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,• Professional Attitude,Ability to Build Rapport,Self-Motivated,Confident,Adaptable....Read more...
Maintaining the site landscaping to a high standard
Maintaining lawns, trees, shrubs, hedges, flowers
Operating and maintaining hand and power tools
Operating and maintaining lawn mowing and other equipment
Keeping grounds free from litter and debris
Weeding
Watering of lawns, trees and plants
Leaf and debris blowing and collecting
General DIY tasks as required from time to time
Jet washing slabs, building etc
Snow clearing and gritting in winter months
Able to work flexibly and some overtime where required
The role involves frequent standing, walking, reaching and carrying
Some care of the wildlife on site may be required (eg; hedgehogs/bees/rabbits)
Maintain an area where biodiversity is of key importance
Training:Training: Delivery to be completed on site and off the job training either at Barnsley College or your place of work. Student to complete a Horticulture or landscape construction operative level 2 apprenticeship.Training Outcome:
There are plenty of opportunities, however this will depend on performance and potential of the candidate
Employer Description:AESSEAL is one of the world’s leading specialists in the design and manufacture of mechanical seals and support systems for a sustainable future. Through our investment in innovative new sealing solutions we enable our customers in a wide range of industries to meet the complex needs of society both now and in the future. AESSEAL works with a range of industrial sectors including; oil and gas, chemical and pharmaceutical, pulp & paper, mining & minerals, food & beverage, power generation, water and waste water, bio / ethanol, automotive and metal processing. Our promise to customers is simple: we aim to give such exceptional service that they need never consider alternative sources of supply. Originating in South Yorkshire 1979 and starting with only just 8 employees, the business has grown into a global manufacturing organisation that now has sites in +180 countries and +200 locations. It now has over 1900 employees across the globe, and groups sales of over £230 million per annum.Working Hours :Working week: Monday - Friday, 9.00am - 5.00pm during initial apprenticeship.
Occasional weekend work may be required.Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Presentation skills,Team working,Creative,Initiative,Physical fitness....Read more...
Service technicians are trained in all areas of vehicle mechanics and electronics, from engine and exhaust systems to air conditioning and security features.
The role will vary by the employer based upon the specific needs of the location, but the position typically involves:
Developing an understanding of workshop equipment
Advising the service receptionists about required repairs
Producing time estimates
Maintaining repair and service records
Training:Motor Vehicle Service and Maintenance Technician (light vehicle) Level 3 Apprenticeship Standard:
The Programme lasts for at least 36 months (3 years) and you'll achieve a nationally recognised qualification
All of our apprentices are employed through the Dealer Network and attend week-long block training at our state-of-the-art Training Centre in Coventry
Block training is complemented by a combination of regular coaching visits from one of our experienced Coaches as well as Virtual Classroom sessions and E-Learning modules
Your development is supported through your apprenticeship journey, with your learning focused towards achieving a qualification recognised across the motor industry. This will provide the foundation to develop your career, as there are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme
Before the Standard is met, all apprentices must hold a certificate that meets the EU’s 2014 F-gas regulation
Motor vehicle service and maintenance technician (light vehicle)/Institute for Apprenticeships and Technical Education
Please ensure you have copies of your GCSE, Scottish National, and Functional Skills certificates, as we may request to see them during the application process
Training Outcome:There are lots of opportunities within our expanding dealer network to progress and move into new roles once you’ve successfully completed the programme.Employer Description:With that heritage, Research Garage Group offer first-class customer service from our three showrooms in Nuneaton and Hinckley for the leading brands; Fiat, Alfa Romeo, Jeep, Abarth, Peugeot & Fiat Professional.
We take great pride in the excellence of the facilities we provide for our customers. At Research Garage Group we have contemporary showrooms with free Wi-Fi, customer seating areas with refreshments and state-of-the-art automotive workshops offering servicing and MOT for all makes and models.
Our extensive range of quality new and used vehicles make us the first choice for customers old and new every year.Working Hours :Monday - Friday, between 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working....Read more...
You will have the opportunity to gain new skills and knowledge whilst carrying out maintenance and repairs on heavy vehicles over 3.5 tonnes in your workplace, this will include mechanical, pneumatic, hydraulic, and electrical vehicle systems.
You will be immersed in the fast paced and thriving world of the automotive industry. The tasks you will face will be ever changing, with new technologies and diagnostic techniques constantly being introduced.
Some of the tasks you will be working on include:
Servicing vehicles – carrying out checks and general maintenance according to the manufacturers’ guidelines.
Repairing and replacing faulty parts and components.
Maintaining repair and service records
Training:The apprenticeship training is delivered via weekly block releases at S&B throughout a year, learning will also take place in the workplace and a S&B Development Coach and Workplace Mentor are allocated to support and monitor your progress to help you reach your goals and manage your workload. Your employer will pay you when you are attending weekly training blocks at S&B.Training Outcome:We are committed to providing you with all the support and training you need to gain your Apprenticeship Qualification and to develop your career further with us. As a company we love to help our employees by encouraging them, this could open up even more career opportunities.Employer Description:Dennis Eagle, part of the Terberg Environmental Group, is a world leader in the design and manufacture of refuse collection vehicles, with an established reputation for supplying quality products that meet the highest expectations in terms of performance, cost and delivery.
Committed to the continued development of innovative solutions for the waste and recycling market, the company provides complete vehicle solutions, producing refuse collection bodies, chassis and bin lifts. Its comprehensive product portfolio offers a configuration to suit every application, and this is backed-up by unrivalled customer service provided by the largest aftersales and support structure in the industry.
Today, Dennis Eagle manufactures over 1,000 units per year for UK local authorities and private sector contractors. In addition, it has a continually expanding customer base overseas, including in continental Europe, Scandinavia, Australia and the U.S.A.
The company has consistently led the low entry chassis market, and its Elite 6 cab has been proven to offer an unparalleled standard of direct driver visibility and cyclist safety. As a result of the company’s expertise in developing large trucks with high visibility cabs for use in urban environments, it was approached by TfL to take part in the Construction Logistics and Community Safety (CLOCS) initiative.
This has led to the development of an Urban Safety Vehicle range, which currently includes skip-loader, tipper and tipper grab variants, with plans to introduce a number of other body options moving forward.Working Hours :Monday to Friday
08:00 - 16:30Skills: Attention to detail,Problem solving skills,Logical,Team working,Initiative....Read more...
You will have the opportunity to gain new skills and knowledge whilst carrying out maintenance and repairs on heavy vehicles over 3.5 tonnes in your workplace, this will include mechanical, pneumatic, hydraulic, and electrical vehicle systems.
You will be immersed in the fast paced and thriving world of the automotive industry. The tasks you will face will be ever changing, with new technologies and diagnostic techniques constantly being introduced.
Some of the tasks you will be working on include:
Servicing vehicles – carrying out checks and general maintenance according to the manufacturers’ guidelines.
Repairing and replacing faulty parts and components.
Maintaining repair and service records
Training:The apprenticeship training is delivered via weekly block releases at S&B throughout a year, learning will also take place in the workplace and a S&B Development Coach and Workplace Mentor are allocated to support and monitor your progress to help you reach your goals and manage your workload. Your employer will pay you when you are attending weekly training blocks at S&B.Training Outcome:We are committed to providing you with all the support and training you need to gain your Apprenticeship Qualification and to develop your career further with us. As a company we love to help our employees by encouraging them, this could open up even more career opportunities.Employer Description:Dennis Eagle, part of the Terberg Environmental Group, is a world leader in the design and manufacture of refuse collection vehicles, with an established reputation for supplying quality products that meet the highest expectations in terms of performance, cost and delivery.
Committed to the continued development of innovative solutions for the waste and recycling market, the company provides complete vehicle solutions, producing refuse collection bodies, chassis and bin lifts. Its comprehensive product portfolio offers a configuration to suit every application, and this is backed-up by unrivalled customer service provided by the largest aftersales and support structure in the industry.
Today, Dennis Eagle manufactures over 1,000 units per year for UK local authorities and private sector contractors. In addition, it has a continually expanding customer base overseas, including in continental Europe, Scandinavia, Australia and the U.S.A.
The company has consistently led the low entry chassis market, and its Elite 6 cab has been proven to offer an unparalleled standard of direct driver visibility and cyclist safety. As a result of the company’s expertise in developing large trucks with high visibility cabs for use in urban environments, it was approached by TfL to take part in the Construction Logistics and Community Safety (CLOCS) initiative.
This has led to the development of an Urban Safety Vehicle range, which currently includes skip-loader, tipper and tipper grab variants, with plans to introduce a number of other body options moving forward.Working Hours :Monday to Friday
08:00 - 16:30Skills: Attention to detail,Problem solving skills,Logical,Team working,Initiative....Read more...
As an apprentice Vehicle Damage Assessor, your role will be varied and interesting - no two days will be the same! Typically duties will include:
Inspecting and assessing accident-damaged vehicles
Researching repair methods to work out the correct and safe repair required for each individual vehicle
Using specialist software to produce work instructions and costings
Liaise with technical colleagues, customers and insurance companies to negotiate the repair
Training:Vehicle Damage Assessor Level 4 (Higher national certificate) Apprenticeship Standard:
Our training partner will deliver a high-quality programme here in our state-of-the-art body shop alongside a highly skilled mentor - both will support you in becoming a skilled and qualified vehicle damage assessor
Once the apprenticeship is complete, you will achieve a Level 4 Apprenticeship qualification in Vehicle Damage Assessor
Functional skills if required
Training Outcome:
Following completion of your apprenticeship you can expect permanent employment as well as opportunities to progress into roles such as Workshop Controller or Bodyshop Manager
The opportunities are endless, having a highly regarded set of skills, Apprentices can go on to develop their careers within the automotive sector following their own interests and ambitions
Employer Description:Fix Auto Worsley is part of Fix Auto UK, a network of more than 110 independently owned, branded franchised bodyshops operating across England, Scotland, Wales and Northern Ireland. The Fix Auto UK network is rated ‘Excellent’ on Trustpilot by thousands of customers.
Established as Fix Auto Worsley in 2020, the business is a true family affair. Headed by Managing Director Feroz Bhaloda, his Operations Director brother Idrish and Body Shop Controller brother Sunny. We are a 20+ strong workforce with the site itself possessing more than 20 years of vehicle repair experience.
Housed in a purpose built 8,000 sq ft building with ample secure car parking, the vehicle repair centre consists of two adjoining buildings, one used specially for panel work while the other for MET and paint work. The bodyshop can be easily found just off the A575 main arterial road running west of Manchester city centre.
Like all Fix Auto UK vehicle repairers, the business holds the prestigious BS10125 accreditation which provides the ultimate confidence that all repairs are carried out to the highest British Standards and as such ensures all car accident repairs, dent removals, dent repairs, bumper repairs, wheel alignment and wheel tracking are repaired or rectified to the highest standards.
The team at the car body shop specialises in all car accident repairs, paintless dent removals and paintless dent repairs and effortlessly correct those annoying car scratches and door dinks caused in supermarket car parks!Working Hours :Monday - Friday, 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Your role will be to provide a flexible and quality precision machining service to the Toolroom and Technical functions of the business.
Predominantly machining press tool components to close tolerances utilising technical drawings, CAD/CAM and technical documentation.
Utilising machining and bench fitting skills you will progress on to more and more complicated work pieces, and eventually be able to work with Brandauer Toolmakers to produce the highest quality production tooling to our customer’s specific manufacturing requirements.
The role of the apprentice is very much on the job getting hands on experience:
Utilising conventional processes, Surface grinding
Train in CNC machining centre
Wire EDM process, to machine new press tools
Repairs and maintenance to close tolerances
Working with technical drawings and technical documentation
Using recognised problem solving techniques
Promoting and utilising the Company’s Health & Safety requirements
Championing the use of appropriate PPE
Promoting and striving to improve 5s Standards
Training:Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with us and Make UK, which are fully paid for, including:
Advanced Manufacturing Engineering Practical Foundation Training – in year 1, in 6 week blocks to include 4 weeks at Make UK and 2 weeks in company
Advanced Manufacturing Engineering Workplace
Competence Training - in years 2 to 4 in company
Level 3 BTEC Diploma in Advanced Manufacturing Engineering
Development Knowledge - in Years 1, 2 & 3 on block release to Make UK
In house training in line with your requirements
Further qualifications deemed necessary by your employer
On completion of your studies and End Point Assessment (EPA), you will achieve your full apprenticeship certification that will prove competence as a Level 3 Engineering Technician.Training Outcome:
Fully qualified machinist could lead to being anything from a Toolroom Lead Department Manager to the Manufacturing Director
At Brandauer we like to develop our future leaders
Employer Description:We are a Queens and Kings Award winning engineering and manufacturing business that has been established in Birmingham for over 160 years. Specialising in the design, build and manufacture of high precision tooling and components, the company supplies its solutions to customers in multiple sectors including Telecommunications, Plumbing, Automotive, Aerospace, Medical, Pharmaceutical and Renewables. Having navigated the pandemic with a major focus on R&D and exciting emerging market opportunities, the company has entered a rapid growth phase.Working Hours :Monday - Thursday, 07:30 - 16:15 and Friday, 07:30-12:30Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Under supervision, carry out work on vehicles in accordance with the manufacturer’s procedures.
Ensure all work carried out is completed accurately and to the customer’s satisfaction.
To report, using the correct procedures, any additional work found during repair/inspection.
Accurately complete job cards and reports, including any written descriptions of faults found or repairs completed.
To comply with the company's working practices and procedures.
Ensure all work is carried out by observing safe working practices of self and others.
To undertake training as agreed by the manager/academy. Attend the academy as required to gain the relevant qualifications.
Ensure that your own tools and tools of the company are kept clean and are maintained in a serviceable condition.
Advise the Service Advisors - Customers about required repairs.
Identify & procure the correct parts to meet specific customer requirements.
Demonstrate technical expertise in the practical and theoretical aspects of vehicle systems.
Work towards achieving a qualification in Electric Vehicle and then progress onto further Electric Vehicle Training.
Demonstrates and maintains an appropriate level of technical expertise for a technician in the motor industry. Inspects vehicles and completes allocated work efficiently and accurately, supported by the effective use of relevant tools and technology.
Aligned to the Stoneacre brand values and demonstrates these in their behaviour and approach to people and tasks. Displays honesty and integrity in everything they do.
Inspection, removal and repair of tyres, exhausts, shock absorbers, brakes, filters, and batteries.
Delivering a high level of customer service to all your colleagues and customers.
Training: At least 20% of your working hours will be spent training or studying.Training Outcome:
This is a fantastic opportunity for anyone wanting a career. Our philosophy at Stoneacre is to create careers for life.
Learners, employees and staff are our most important assets.
The success of our company depends on the development of a strong, effective team. Stoneacre has its own accreditation.
Automotive Academy with our specialised training programmes, we aim to inspire all individuals to achieve their ultimate goals through the Stoneacre Careers for Life programme.
Employer Description:Stoneacre Motor Group is one of the UK's fastest growing and most successful motor vehicle dealers. We have over 40 nationwide.
Stoneacre Academy is the Award-Winning Training Department of Stoneacre Motor Group. We’ve already enrolled and completed 100s of apprentices who work in a variety of roles.
Our philosophy at Stoneacre Academy is to create CAREERS FOR LIFE and offer sustainable, life-changing opportunities.Working Hours :Monday - Friday - this may include Saturdays. Hours dependent on individual dealership. Typical day between 8.30am - 5.30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Logical,Team working,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Routine Vehicle Maintenance and Servicing
You will gain hands-on experience performing essential maintenance tasks such as oil changes, fluid top-ups, brake inspections, tyre checks, and replacing worn parts. This foundation work is critical to keeping vehicles safe and running smoothly, and you’ll learn how to carry it out efficiently and accurately.
Carrying Out MOTs Under Supervision
Under the guidance of experienced technicians, you’ll assist with MOT inspections to ensure vehicles meet legal safety and emissions standards. This will help you develop a detailed understanding of vehicle regulations, and the skills needed to conduct thorough checks.
Learning How to Diagnose Faults and Repair Mechanical and Electrical Components
You’ll be introduced to the diagnostic process, learning how to identify issues reported by customers or detected during inspections.
This includes troubleshooting mechanical faults and electrical problems using both traditional methods and digital diagnostic tools, developing your problem-solving skills and technical knowledge.
Working with the Latest Diagnostic Tools and Workshop Equipment
Modern vehicles rely on advanced technology. You’ll receive training on how to use up-to-date diagnostic software, electronic testers, and workshop machinery safely and effectively, preparing you to work in a professional automotive environment.
Understanding and Applying Health and Safety Procedures in a Busy Workshop
Safety is a top priority. You will learn essential health and safety practices, including how to handle tools and equipment safely, manage hazardous materials, maintain a tidy workspace, and adhere to workshop policies to protect yourself, your colleagues, and customers.
Communicating with Customers and the Wider Team.
Good communication is vital in a busy garage. You’ll develop skills to liaise professionally with customers, understanding their concerns and explaining work clearly.
You’ll also collaborate with colleagues from the service, sales, and preparation teams to ensure smooth workflows and a great customer experience.
Training:
Motor Vehicle and Maintenance Technician (Light Vehicle) Level 3
Servicing and repairing light vehicles.
City of Bristol College (Parkway)
Block Release
Training Outcome:
Full time employment
Further training
Employer Description:Carbase are a family-owned business and over the past two decades have become the largest independent pre-owned dealership in the Southwest. With four Carbase locations, including Vanbase Bristol, and a dedicated team of over 200 staff. Our commitment to excellence has earned us prestigious accolades, including the Great Place to Work award and the People and Culture Award from Autotrader in 2023 and 2024.Working Hours :43.75 hours per week worked over 5 days plus the requirement to work 1 Saturday every 4 weeks
Monday to Friday: 8am – 5.30pm (1 hour break – 30 minutes for lunch and 2 x 15 minute breaks)
Saturday: 8am – 1pmSkills: Communication skills,Initiative,Driving licence....Read more...
Automation Engineer (Contract)
Location: Brixworth, Northants Contract Length: 12 Months Rate: £490 per day (Inside IR35) Start Date: ASAP IR35 Status: Inside IR35
Overview
We are seeking an experienced Automation Engineer for a 12-month contract role, working on a high-profile manufacturing programme in the automotive sector. This position is inside IR35 and offers £490 per day. The successful candidate will bring strong experience with legacy machinery and, ideally, exposure to KUKA robotics.
You’ll be responsible for supporting and implementing robust automation and control systems, with a focus on legacy integration, system availability, and process stability.
Key Responsibilities
Analyse, design, simulate, and test procedures for automated machinery and processes
Implement and support automation technology systems, controls architecture and manufacturing standards
Collaborate with suppliers and internal teams to deliver automation solutions from concept through to production
Monitor project performance and timelines, ensuring delivery to scope and budget
Support shop equipment specification, RfQ processes, and commissioning activities
Work with PLCs (preferably Siemens S7, TIA Portal) and automation systems
Translate technical language between programming and engineering disciplines
Drive continuous improvement in manufacturing efficiency and process optimisation
Support adherence to environmental protection standards and legal compliance
Participate in team meetings and cross-functional collaboration
Essential Skills & Experience
Experience working with legacy machinery and automation systems
Ideally experience with KUKA robotics
Solid understanding of PLC programming and automation software development
Previous use of Siemens S7 and TIA Portal
Strong problem-solving skills using programming, data analysis, and controls systems
Familiarity with lean manufacturing principles and process engineering
Excellent communication and documentation skills
Ability to work independently and manage small-scale projects
Comfortable in a fast-paced, change-driven manufacturing environment
Qualifications
Degree in Electrical Engineering, Computer Science, Automation, or similar field – or equivalent experience
Relevant experience in a similar role
Proven ability to deliver technical solutions in a production or industrial setting
If this role is of interest, please apply with your CV.
If you have no heard back within 7 days, please assume that your application has been unsuccessful on this occasion.....Read more...
Mechanical Engineer Surveyor - Lifting Equipment – Milton Keynes or Luton - Total Package Circa £54K containing £46k basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42K-£45K with a great contributory pension, yearly bonus and company car or car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsMilton Keynes or LutonEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor Lifting Equipment – Engineer Surveyor – Cranes and Lifting Equipment – Milton Keynes or Luton - Total Package Circa £54K containing £46k basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.....Read more...
Mechanical Engineer Surveyor – Pressure & Steam Systems – Falkirk/Stirling Total package cira £62K -which includes Basic £45,000-£49,000 + Company Car or Car Allowance & double matching pension + Excellent BenefitsAre you a Mechanical Engineer who is experienced in high pressure systems or steam systems or an engineer surveyor that’s interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £45,000-£49,000 with double matching contributory pension, yearly bonus and car or car allowanceThe CompanyTurnoverA well established business, draped in history, who are at the forefront of innovation in their approach to business. This innovation and work style is a key component to how they increase revenues year on year.ServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsFalkirk/StirlingPackage:Getting you to work
Company Car or Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension double matchingCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays40 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Main Accountabilities:
Inspection and certification of pressure air and steam systemsBoilers, steam plant, compressors, steam turbines, pressure vessels condensers, heat exchangersAutonomy of personal diary Streamlined and simplified recording of information Maintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing relevant pressure equipment eg boilers, compressors, heat exchangers, steam plant UK Driving licenceCustomer facing skills
Engineer Surveyor – Pressure & Steam Systems – Falkirk/Stirling - £45,000-£49,000 Basic Salary + Car Allowance & Excellent Benefits....Read more...
Mechanical Engineer Surveyor Lifting Equipment – Engineer Surveyor – Cranes and Lifting Equipment – Perth- Total Package Circa £56K+ containing £43K-£45K basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £43K-£45K with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsPerthEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patch
Maintaining client relationships
Full Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Perth - £43,000 £45,000 basic + Company car or £5000 Car allowance, private health, double matching pension....Read more...
Mechanical Engineer Surveyor Lifting Equipment – Engineer Surveyor – Cranes and Lifting Equipment –Bristol - Total Package Circa £56K+ containing £42K-£45K basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42K-£45K with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsBristolEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patch
Maintaining client relationships
Full Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Bristol - £42,000 £45,000 basic + Company car or £5000 Car allowance, private health, double matching pension....Read more...
Mechanical Engineer Surveyor Lifting Equipment – Engineer Surveyor – Cranes and Lifting Equipment – Edinburgh - Total Package Circa £56K containing £42k-£45 basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42k-£45K with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsEdinburghEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Edinburgh - £42,000-£45,000 basic + Company car or £5000 Car allowance, private health, double matching pension....Read more...
Mechanical Engineer Surveyor Lifting Equipment – Mechanical Engineer Surveyor – Cranes and Lifting Equipment –Birmingham - Total Package Circa £56K+ containing £42K-£45K basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you a mechanical engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42K-£45K with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsBirminghamEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Mechanical Engineer Surveyor – Cranes and Lifting Equipment – Birmingham - £42,000 £45,000 basic + Company car or £5000 Car allowance, private health, double matching pension....Read more...
Engineer Surveyor Lifting Equipment – Engineer Surveyor – Cranes and Lifting Equipment –Aberdeen - Total Package Circa £56K+ containing £42K-£45K basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42K-£45K with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsAberdeenEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Engineer Surveyor – Cranes and Lifting Equipment – Aberdeen - £42,000 £45,000 basic + Company car or £4250 Car allowance, private health, double matching pension....Read more...
Mechanical Engineer Surveyor Lifting Equipment – Engineer Surveyor – Cranes and Lifting Equipment –Taunton - Total Package Circa £56K+ containing £42K-£45K basic + Company car or Car allowance, private health, double matching pension and overtime to increase this further.Are you an engineer with experience of maintaining, servicing or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic of £42K-£45K with a great contributory pension, yearly bonus and company car or car allowance The CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring lifting equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationsTauntonEngineer Surveyor Package:Getting you to work
Company Car or Car Allowance
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12-16 weeks modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 8 different career options
Securing your future
Employer double matching pension contributions up to 8%Guaranteed annual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days40 hours flexible working week which allows homelife balanceVast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Engineer Surveyor Main Accountabilities:
Inspection and certification of cranes and lifting equipment (Gantry Crane, Crawler Cranes, Scissor lift, MEWPs Excavators, FLT’s)Working to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
Level 4 qualification in eg HNC and above (Mechanical based subject)Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Cranes Engineer Surveyor – Mechanical Engineer Surveyor – Cranes and Lifting Equipment – Taunton - £42,000 £45,000 basic + Company car or £5000 Car allowance, private health, double matching pension....Read more...
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5KAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic between £40.5K-£42.5K (rising to £45.5K after 12 months service and £50.5K after 24 months ) with 10% contributory pension, yearly bonus and £5.5K car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationCoventryEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5.5K)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5K....Read more...
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5KAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic between £40.5K-£42.5K (rising to £45.5K after 12 months service and £50.5K after 24 months ) with 10% contributory pension, yearly bonus and £5.5K car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationOxfordEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5.5K)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5K....Read more...
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5KAre you an engineer with experience of maintaining, servicing, or inspecting any type of lifting equipment or cranes? Are you interested in a career with a huge test, inspection and certification company with over a hundred and fifty years of history?You will be rewarded with an extensive benefits package and have over £55,000 training invested in you within the first 12 months. In addition, you will receive a basic between £40.5K-£42.5K (rising to £45.5K after 12 months service and £50.5K after 24 months ) with 10% contributory pension, yearly bonus and £5.5K car allowanceThe CompanyServicesA SAFED and UKAS accredited world leading professional services company who support businesses with quality & compliance and carry out high quality inspections ensuring pressure equipment is compliant with current regulatory and statutory requirements. SectorsAerospace, Manufacturing, Forces, Commercial, Automotive, Marine, Utilities, Industrial, NuclearLocationReadingEngineer Surveyor Package:Getting you to work
Company Car Allowance (£5.5K)
Advancing your career
Step up from the tools into a professional engineering environmentMinimum £55,000 training investment in you for the first 12 monthsUp to 12 week modular training programme with a blend of classroom and practical learningSupport with professional membership including renewal fees paidCareer Ladder with 5 different career options
Securing your future
Employer pension contribution 7.5% increasing to 10% with a 2.5% employee contributionCompany wide bonusAnnual review
Work life balance
33 days holiday including statutory holidays the ability to buy and sell extra days45 hour flexible working week which allows homelife balanceWorking week paid door to door with vast opportunities for overtime which is not mandatoryHome based roleCentralised diary management team assist in booking your appointments
Looking after your family
Life cover of 2 times salary
Engineer Surveyor Main Accountabilities:
Inspection and certification of lifting equipment & cranesWorking to LOLER and PUWER regulationsManaging diary and clients with patchMaintaining client relationshipsFull Technical Specialist SupportOperate within agreed authorities, inspection and H&S standardsClear customer focus and drive to achieve optimal service delivery
Qualifications Knowledge, Skills and Experience:
HNC or Level 4 qualification equivalent or above in any engineering discipline Hands on experience of fixing, inspecting, maintaining, repairing or servicing any lifting equipment or cranes UK Driving licenceCustomer facing skills
Engineer Surveyor – Cranes & Lifting Equipment Total package circa £55K with a basic of £40.5-£42.5K....Read more...
Quality Engineer
Engineering Manufacturing Industry
CMM experience essential
Coventry CV3
Up to £38k per annum
Early finish Friday, Holiday and Pension
Are you an experienced Quality Engineer or Quality Inspector with CMM experience and a background in engineering manufacturing who is looking to join an established engineering business with an enviable reputation within their industry? If yes, read on .
My established client specialises in manufacturing components for the automotive industry. They are currently looking for a new Quality Engineer to join their small but established quality team. Commutable from Nuneaton, Warwick, Rugby, Leamington Spa and Hinckley.
This is a hands-on position, mainly related to inspection, where flexibility and a desire to constantly improve are the most relevant soft skills to assure a systematic company improvement. The role requires a strong cross functional relationship to communicate key issues effectively on a regular basis to all staff, customers and suppliers.
Duties Include - Quality Engineer
- Working as part of the Quality Inspection team to ensure quality process controls are properly engineered, based on ISO:9001 rules, on Customer Specific Requirements, on the feasibility analysis and PFMEA results
- Collaborate with production and design teams to promote customer satisfaction across all employees on site
- Managing the Quality Management System
- CMM Programming, Online and Offline (Offline programming training can be provided)
- Monitor and report Quality KPIs
- PPAP's and APQP's (training can be provided)
- Respond proactively to customer complaints and questionnaires, resolving them in a timely manner and reporting on outcomes
- Work closely with the Design Team to resolve any production-related build issues
- Maintain and improve existing Quality Systems
- Conduct internal and supplier audits as needed
- Inspection under direct quality staff responsibility at all stages of production against the design specification are carry out
Key Skills / Experience Required - Quality Engineer
- Experience in quality control in the engineering manufacturing field, particularly on machined components
- Interpretation of mechanical drawings (ISO Standard)
- Knowledge of geometric dimensions and tolerances GD&T
- Ability to select and use basic measuring equipment, micrometres, calipers, protractors etc
- Ability to use standard gauging including plug, gap, acceptance etc
- CMM basic program editing, probe qualification etc
- Ability to interpret and understand specific customer quality standards and requirements
- Comprehensive knowledge of IS0:9001
- Ability to provide Quality Assurance support on quality tools and best practices, in a fast-paced engineering environment (ISR - Initial Sample Reports, balloons drawings, control plans, 8d reports, Deviation and Concession Requests, AIMs Action in Manufacturing, etc.)
- Basic Metrology experience
- Experience carrying out internal audits as per the ISO9001 standard
- Competent problem-solving skills
- Excellent oral and written English and basic computer skills
The Package - Quality Inspector
- Starting salary of up to £38K per annum, depending on experience
- Day shifts, Monday to Friday including early finish Friday
- Enhanced Overtime Rates
- Pension and Enhanced Holiday Package
Interested? To apply for this Quality Inspection position, here are your two options:
1. "This is the job for me! When can I start?" - Call 0116 2545411 now and lets talk through your experience. Ask for Dan Henderson between 8.30am - 5.30pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
Machine Shop Manager
Manufacturing Industry
Day Shifts - Cheddar - BS27
£42K Per Annum Depending on Experience
We are seeking an experienced and technically strong Machine Shop Manager to lead day-to-day operations within our busy and fast-paced workshop. This role is ideal for someone with a hands-on background in machining who now thrives in a leadership and planning capacity. Youll be responsible for workflow management, team performance, customer liaison, and the overall efficiency and output of the machine shop. While the position is predominantly desk-based, deep technical knowledge and practical experience in machining processes are essential.
This is a fantastic opportunity for a skilled leader with a technical machining background to make a real impact in a growing and ambitious engineering business. If youre driven by quality, efficiency, and team success, wed love to hear from you. Commutable from Cheddar, Draycott, Axbridge, Wedmore, Badgworth and Winscombe.
Key Responsibilities: Machine Shop Manager
- Lead and supervise the machine shop team, ensuring work is delivered on time, to spec, and to a high standard.
- Plan and schedule workload in line with customer requirements and operational resources.
- Monitor workshop performance and compliance with quality, safety, and operational procedures.
- Provide day-to-day technical support and training to machinists and engineering staff.
- Liaise with customers to understand technical requirements, provide updates, and ensure satisfaction.
- Review and sign off job estimates and quotations, working closely with admin and sales teams.
- Conduct regular staff reviews, manage attendance, and maintain team discipline and morale.
- Oversee job records, inspection documentation, and production data to ensure full traceability.
- Manage stock levels in coordination with stores to ensure timely availability of materials and parts.
- Champion a clean, safe, and compliant workshop environment, enforcing PPE and safety policies.
- Maintain and manage all machinery, tools, and workshop equipment to ensure operational readiness.
- Monitor workshop budgets, controlling spend on labour, spares, and materials.
- Generate accurate and timely operational reports for senior management.
- Be available for occasional overtime or out-of-hours support as required.
Skills & Experience Required: Machine Shop Manager
- Proven background in machining or mechanical engineeringideally within aerospace, automotive, or industrial sectors.
- Significant experience in a workshop supervisory or management role.
- Deep knowledge of machining techniques, materials, and tools.
- Exposure to welding and balancing processes would be an advantage.
- Strong mechanical and electrical understanding preferred.
- Excellent planning and organisational skills with the ability to manage competing priorities.
- Strong leadership and team development skills, with the ability to motivate and support others.
- Confident communicator, capable of liaising with internal departments and external customers.
- High level of computer literacy, especially in MS Office (Excel, Word, PowerPoint).
- Comfortable with quoting and job costing processes.
The Package: Machine Shop Manager
- Starting salary £42k Per Annum Depending on Experience
- Monday to Friday 8-5pm
- 33 Days Holiday Including Bank holidays
- Private Health Care on completion of probation
Interested? To apply for this Machine Shop Manager position, here are your two options:
1. "This is the job for me! When can I start?" - Call 0116 2545411 now and lets talk through your experience. Ask for Nilam between 8.30am - 5.30pm.
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
Finance & Operations Manager
Salary: circa £35,000 per annum (depending on experience) Benefits: Generous Holidays | Pension | Free Parking | Christmas Shutdown | Training Provided
Job Type: Monday to Friday, Full-Time, Permanent
Office-based in Stourbridge with the option of 1 day per week working from home– commutable locations include Wordsley, Kingswinford, Brierley Hill, Dudley, Halesowen, Quinton, Wombourne, Kinver, Kidderminster, Wolverhampton, Bromsgrove
We are recruiting for a Finance & Operations Manager to join a successful and expanding industrial distributor based in Stourbridge, West Midlands. This position is ideal for a highly organised, detail-driven individual with strong numerical skills and experience across finance and operational administration.
You’ll play a key role in supporting the day-to-day running of the business, working in a hands-on role that spans finance, logistics, purchasing, and compliance. This is a fantastic opportunity to join a growing international B2B company supplying products to the UK and European manufacturing sectors.
Key Responsibilities
Check and process purchase order invoices.
Prepare supplier payments and complete bank reconciliations.
Manage cash flow and arrange foreign currency orders.
Conduct cost and margin calculations, including freight costs.
Maintain accurate stock records, perform stock reconciliations, and support stock reviews.
Advise on stock purchasing requirements.
Manage import paperwork and ensure correct import duties are paid.
Liaise with customs and freight providers for incoming shipments.
Manage staff expenses, holiday tracking, and absence reporting.
Oversee credit control.
Support with insurance renewals.
Ensure compliance with Health and Safety requirements.
Review and invoice for internal business recharges.
Carry out general bookkeeping and Sage data entry.
Ideal Candidate – What We’re Looking For:
Strong numerical and analytical abilities.
Proficient in Microsoft Excel with good spreadsheet confidence.
Experience with Sage or similar finance software.
Meticulous with excellent attention to detail. Logical and methodical in approach.
Proactive and motivated to take ownership of tasks.
Previous experience in finance, bookkeeping, stock control or operations is preferred.
A proven background in a data analysis / numerical type role is essential.
Why Join Us?
Well-established and growing company with 20+ years of success.
Opportunity to grow your skills in a varied and rewarding role.
Supportive and close-knit team environment.
A chance to contribute directly to the performance and efficiency of the business.
Apply Today: Send your CV to Kayleigh Bradley at Glen Callum Associates Ltd or call Kayleigh on 07908 893621 for a confidential discussion
Job Reference: 4254KB Finance and Operations Coordinator
Glen Callum Associates – Global recruitment experts for the automotive aftermarket and allied industries.....Read more...
Parts Advisor - Commercial Vehicle
Are you an experienced Parts Advisor with Commercial Vehicle experience looking to enhance your career with a well-established company? Do you have a passion for commercial vehicle parts and accessories and a drive to deliver excellent customer service? If so, we have the perfect opportunity for you!
We are currently seeking a Commercial Vehicle Parts Advisor with at least 2 years’ experience to join our team at a leading business specialising in the sale of a comprehensive range of commercial vehicle parts and accessories. The company offers a vibrant working environment with a dynamic culture that values innovation, customer service, and employee engagement. As part of the team, you’ll have the chance to make a real impact while benefiting from the company’s Employee Ownership Trust, allowing you to own shares in the business!
Location: Easily commutable from Retford, Doncaster, Bawtry, Gainsborough, Worksop, Rotherham, Tuxford, Rampton, Lincoln, Newark on Trent, Chesterfield, Clowne.
Salary: OTE: £47K (basic up to £40K DOE) + Pension scheme + 20 days holiday (28 days total including Bank Holidays) + Employee Ownership Trust + Free onsite parking.
The Role:
As a Commercial Vehicle Parts Advisor, you will be the key point of contact for customers seeking expert advice on commercial vehicle parts. You will help process orders, manage customer relationships, and contribute to the growth of customer accounts.
Key Responsibilities:
Assist customers with commercial vehicle parts enquiries, offering expert advice and solutions.
Utilise your experience as a Parts Advisor to meet customer needs effectively and professionally.
Make outbound calls to update customers on order statuses and ensure complete satisfaction.
Develop and grow customer accounts through excellent relationship management.
Process customer orders accurately and in a timely manner.
Maintain up-to-date records of customer information and order details in the company’s systems.
Skills and Experience:
Minimum 2 years’ experience as a Parts Advisor, ideally within the commercial vehicle sector.
Strong knowledge of commercial vehicle parts and accessories.
Excellent customer service skills with the ability to communicate effectively.
Comfortable making outbound calls to provide updates and resolve queries.
Experience in building and managing customer accounts.
Proficient in using computer systems for order processing and customer data management.
Strong organisational skills with a keen eye for detail.
How to Apply:
If you’re ready to take the next step in your career, we’d love to hear from you! To apply for this role, please send your CV to Robert Cox at or call Rob directly on 07398 204832 for a chat.
Glen Callum Associates Ltd – Automotive Aftermarket Recruitment Specialists
JOB REF: 4214RC Parts Advisor – Commercial Vehicle....Read more...
