Within our Autocentres no two days are ever the same. You can expect to encounter almost any make or model of car for almost every piece of work you can think of; from servicing, inspections to the more complex repair work, engine rebuilds and diagnostics work.
The nature of the work ranges from:
Replacing simple parts through to solving complex faults with the use of diagnostic methods and equipment
The day-to-day tasks faced by a vehicle technician are constantly changing, driven by the introduction of ever more complex technologies and diagnostic techniques
Follow recognised diagnostic procedures, logical diagnostic sequence and apply advanced diagnostic principles and problem-solving techniques to establish faults
Follow recognised repair procedures to complete a wide range of repairs including those which involve complex procedures, or in-depth knowledge
Test the function of repaired and fitted components
Interpret diagnostic information and use electrical wiring diagrams to determine system serviceability
Obtain diagnostic and repair information
Complete a range of services and inspect and prepare a vehicle to the required quality standard for handover to the customer
A successful Halfords Autocentre Apprentice is adaptable, flexible and enjoys the challenge of resolving new problems every day. You will be customer focused with sharp attention to detail as well as the ability to listen to and learn from you college lecturers, colleagues and mentors to gain the skills to diagnose and repair vehicles to the highest standard.
Today’s apprentice has to demonstrate expertise in the technical and diagnostic side of their role.
You must have strong problem-solving skills and a good grasp of the theoretical and practical aspects of a vehicle’s systems.
You must be able to work independently but also operate as an effective team member and understand how their workshop and the Autocentre functions from a commercial perspective.
As part of the recruitment process, candidates will be required to attend an Assessment Day at the Greater Manchester Skillcentre in Trafford Park if successful at 1st stage of interview. If successful after the assessment day, candidates will then be asked to complete an unpaid 5 day placement within the Autocentre applied for.
Successful completion of the Level 2 Apprenticeship will lead to progression to a Level 3 Motor Vehicle Service and Maintenance Apprenticeship.
How you will be supported:
Full training and support will be provided by The Growth Company to help you achieve your apprenticeship and reach your full potential in your role.
What will happen next:
New applicants to The Growth Company who meet any basic entry requirements of the role will be contacted within two working days to be invited to meet a member of our team. You will then have the opportunity to find out:
More about this vacancy and any others you are suitable for
Any training you need to complete
What the next steps will be
How you could get there:
If you would be catching public transport for this role, visit the Journey Planner on www.tfgm.com to see how you would get there and how long it would take.Training:Autocare Technician Level 2.Training Outcome:Possible progression within the company and progression onto the next level apprenticeship.Employer Description:We’re the UK’s leading retailer of automotive and cycling products, and one of the UK’s leading operators in car servicing and repairs. We’re all about the journey, whether that’s helping our customers to get the most out of theirs, or putting people like you in the driving seat when it comes to work and career. And because people like you are at the heart of our success, we’ve created a culture of engagement where the customer is at the heart of everything we do, where people work together to be better every day, where energy and enthusiasm drives career development, and where you’ll be inspired to embrace challenge as opportunity. If you share our ambitions for growth and want to take control of the pace of your own development, you’ll find that Halfords is a place where you can go further, faster. We’re already recognised as a great place to work and we’re doing everything we can to be even better for people who share our confidence, inclusive approach, integrity and ambition. More than 10,000 people work in our shops, Autocentres and Mobile Expert hubs at over 750 locations and 90% of the UK is never more than 20 minutes away from a Halfords shop or Autocentre.Working Hours :Working patterns will fall between 08:00 - 18:00 Monday to FridaySkills: Communication skills,Attention to detail,Problem solving skills,Team working,Initiative,Interested in Automotive trade,Enthusiastic,Garage experience preferred,Punctual,Reliable,Honest,A disciplined attitude....Read more...
Within our Autocentres no two days are ever the same. You can expect to encounter almost any make or model of car for almost every piece of work you can think of; from servicing, inspections to the more complex repair work, engine rebuilds and diagnostics work.
The nature of the work ranges from:
Replacing simple parts through to solving complex faults with the use of diagnostic methods and equipment
The day-to-day tasks faced by a vehicle technician are constantly changing, driven by the introduction of ever more complex technologies and diagnostic techniques
Follow recognised diagnostic procedures, logical diagnostic sequence and apply advanced diagnostic principles and problem-solving techniques to establish faults
Follow recognised repair procedures to complete a wide range of repairs including those which involve complex procedures, or in-depth knowledge
Test the function of repaired and fitted components
Interpret diagnostic information and use electrical wiring diagrams to determine system serviceability
Obtain diagnostic and repair information
Complete a range of services and inspect and prepare a vehicle to the required quality standard for handover to the customer
A successful Halfords Autocentre Apprentice is adaptable, flexible and enjoys the challenge of resolving new problems every day. You will be customer focused with sharp attention to detail as well as the ability to listen to and learn from you college lecturers, colleagues and mentors to gain the skills to diagnose and repair vehicles to the highest standard.
Today’s apprentice has to demonstrate expertise in the technical and diagnostic side of their role.
You must have strong problem-solving skills and a good grasp of the theoretical and practical aspects of a vehicle’s systems.You must be able to work independently but also operate as an effective team member and understand how their workshop and the Autocentre functions from a commercial perspective.
As part of the recruitment process, candidates will be required to attend an Assessment Day at the Greater Manchester Skillcentre in Trafford Park if successful at 1st stage of interview. If successful after the assessment day, candidates will then be asked to complete an unpaid 5 day placement within the Autocentre applied for.
Successful completion of the Level 2 Apprenticeship will lead to progression to a Level 3 Motor Vehicle Service and Maintenance Apprenticeship.
How you will be supported
Full training and support will be provided by The Growth Company to help you achieve your apprenticeship and reach your full potential in your role.
What will happen next
New applicants to The Growth Company who meet any basic entry requirements of the role will be contacted within two working days to be invited to meet a member of our team. You will then have the opportunity to find out:
More about this vacancy and any others you are suitable for
Any training you need to complete
What the next steps will be
How you could get there
If you would be catching public transport for this role, visit the Journey Planner on www.tfgm.com to see how you would get there and how long it would take.Training Outcome:Possible progression within the company and progression onto the next level apprenticeship.Employer Description:We’re the UK’s leading retailer of automotive and cycling products, and one of the UK’s leading operators in car servicing and repairs. We’re all about the journey, whether that’s helping our customers to get the most out of theirs, or putting people like you in the driving seat when it comes to work and career. And because people like you are at the heart of our success, we’ve created a culture of engagement where the customer is at the heart of everything we do, where people work together to be better every day, where energy and enthusiasm drives career development, and where you’ll be inspired to embrace challenge as opportunity. If you share our ambitions for growth and want to take control of the pace of your own development, you’ll find that Halfords is a place where you can go further, faster. We’re already recognised as a great place to work and we’re doing everything we can to be even better for people who share our confidence, inclusive approach, integrity and ambition. More than 10,000 people work in our shops, Autocentres and Mobile Expert hubs at over 750 locations and 90% of the UK is never more than 20 minutes away from a Halfords shop or Autocentre.Working Hours :Working patterns will fall between 08.00 - 18.00, Monday to Friday.Skills: Communication skills,Attention to detail,Problem solving skills,Team working,Initiative,Interested in Automotive trade,Enthusiastic,Garage experience preferred,Punctual,Reliable,Honest,A disciplined attitude....Read more...
An exciting opportunity has arisen for a Software Developer to join a leading provider of advanced flight simulation technology. You will develop real-time software used in state-of-the-art Full Flight Simulators and Fixed Training Devices that replicate the form, fit, and function of real aircraft flight decks.
This role sits at the heart of a major transformation programme and is ideal for someone who is hands-on, motivated, and eager to implement change in a fast-paced, customer-focused environment.
Key Responsibilities for the Software Developer
- Develop real-time software for flight simulators, from control systems to graphical user interfaces.
- Support integration, testing, fault finding, and problem resolution on simulated systems.
- Contribute to the full product lifecycle, from requirements analysis through to customer acceptance and post-delivery support.
What Youll Bring
- Strong C programming skills.
- Practical understanding of the Systems Engineering V-model and/or Software Development Lifecycle.
- Ability to work collaboratively in a multi-disciplinary team, with minimal supervision.
- Strong communication and presentation skills.
- Degree in engineering, mathematics, science, or equivalent experience within aviation/aerospace engineering.
Desirable Skills
- Experience with safety-critical systems in aerospace, automotive, or related industries.
- Knowledge of C#, C++, web technologies (JavaScript, HTML), and Windows application development (Visual Studio).
- Familiarity with ARINC, AFDX, or CAN bus protocols.
- Experience using the Atlassian toolset (Jira, Confluence, Bitbucket, Bamboo).
Benefits
- 25 days holiday (plus bank holidays), increasing with service, with the option to buy/sell up to 5 days.
- Private medical insurance (with optional family cover).
- Pension scheme with up to 7% employer contribution.
- Life assurance (4x salary, flexible up to 10x).
- Group income protection.
- Flexible benefits including healthcare cash plan, dental cover, gym membership, critical illness cover, and cycle-to-work scheme.
- Employee assistance programme for mental health and wellbeing.
- Subsidised staff restaurant and on-site parking with electric vehicle charging.
Why Join
- Challenging Projects: Work on cutting-edge flight simulators used by global aerospace organisations.
- Collaborative Environment: Partner with experts across systems, hardware, and software engineering.
- Innovative Technology: Develop next-generation simulation solutions, including avionics hardware and advanced control systems.
- Career Growth: Opportunities for professional development and advancement within a forward-thinking, global industry.
Eligibility: Applicants must have the right to work in the UK.
This is a unique opportunity to contribute to next-generation flight simulation technology, working with cutting-edge systems that enhance pilot training and aviation safety worldwide.
TT....Read more...
An exciting opportunity has arisen for a Software Engineer to join a leading provider of flight simulation technology. You will develop real-time software used in state-of-the-art Full Flight Simulators and Fixed Training Devices that replicate the form, fit, and function of real aircraft flight decks.
This role sits at the heart of a major transformation programme and is ideal for someone who is hands-on, motivated, and eager to implement change in a fast-paced, customer-focused environment.
Key Responsibilities for the Software Engineer
- Develop real-time software for flight simulators, from control systems to graphical user interfaces.
- Support integration, testing, fault finding, and problem resolution on simulated systems.
- Contribute to the full product lifecycle, from requirements analysis through to customer acceptance and post-delivery support.
What Youll Bring
- Strong C programming skills.
- Practical understanding of the Systems Engineering V-model and/or Software Development Lifecycle.
- Ability to work collaboratively in a multi-disciplinary team, with minimal supervision.
- Strong communication and presentation skills.
- Degree in engineering, mathematics, science, or equivalent experience within aviation/aerospace engineering.
Desirable Skills
- Experience with safety-critical systems in aerospace, automotive, or related industries.
- Knowledge of C#, C++, web technologies (JavaScript, HTML), and Windows application development (Visual Studio).
- Familiarity with ARINC, AFDX, or CAN bus protocols.
- Experience using the Atlassian toolset (Jira, Confluence, Bitbucket, Bamboo).
Benefits
- 25 days holiday (plus bank holidays), increasing with service, with the option to buy/sell up to 5 days.
- Private medical insurance (with optional family cover).
- Pension scheme with up to 7% employer contribution.
- Life assurance (4x salary, flexible up to 10x).
- Group income protection.
- Flexible benefits including healthcare cash plan, dental cover, gym membership, critical illness cover, and cycle-to-work scheme.
- Employee assistance programme for mental health and wellbeing.
- Subsidised staff restaurant and on-site parking with electric vehicle charging.
Why Join
- Challenging Projects: Work on cutting-edge flight simulators used by global aerospace organisations.
- Collaborative Environment: Partner with experts across systems, hardware, and software engineering.
- Innovative Technology: Develop next-generation simulation solutions, including avionics hardware and advanced control systems.
- Career Growth: Opportunities for professional development and advancement within a forward-thinking, global industry.
Eligibility: Applicants must have the right to work in the UK.
This is a unique opportunity to contribute to next-generation flight simulation technology, working with cutting-edge systems that enhance pilot training and aviation safety worldwide.
TT....Read more...
Bodyshop Controller / Quality Controller Vacancy:
- Salary up to £50,000 per annum plus bonus
- 45 hours per week Monday - Friday
- 23 days Holiday + Bank Holidays
- Company Benefits
- Permanent Role
We are working with a growing Accident Repair Group looking for a highly skilled Bodyshop Controller / Quality Controller to join their team based in the Bracknell area.
This company is renowned for repairing vehicles the right way with quality, and genuine care.
They work with innovative manufacturers, so they need a team that is constantly looking to improve and stay ahead of the curve.
If successful you will be working in state-of-the-art environments and provided training opportunities to keep you at the top of your game.
Key Bodyshop Controller / Quality Controller Responsibilities:
- Working closely with the Bodyshop productives you will be responsible for ensuring that all body repairs and paintwork meet defined quality procedures/Standards.
- Promoting inter-department co-operation as well as ensuring compliance with health and safety procedures will all be part of the role
- You will also be responsible for overseeing and motivating a team of productive staff as well as working closely with the estimators to ensure that the site is as profitable as possible.
- Detecting any imperfections, misalignments, damage, or blemishes on the repaired vehicle, including paint defects, panel gaps, and improper fitting.
- Verifying that all repair procedures were followed correctly, including proper parts usage, repair techniques, and adherence to industry best practices.
As an Bodyshop Controller / Quality Controller you will have:
- Been working in a similar role as a Bodyshop Quality Controller or in a Productive role within a Bodyshop.
- Ideally have experience with Autoflow.
- Computer literate.
- Experienced in Defect Identification, Quality Assurance Checks, Documentation, Customer Feedback, Standard Compliance, and confidence reporting issues to technicians to ensure manufacturer standards are achieved.
- Have experience in developing relationships with customers and colleagues.
- Have the drive and determination to maintain a productive department and the ability to work under pressure and achieve results through other people.
If you want to hear more about the Bodyshop Controller / Quality Controller role, please send us your CV by clicking apply now or by contacting Piam on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
Bodyshop Controller/Quality Controller up to £50k + Bonus Bracknell
Assistant Bodyshop Manager or Bodyshop Controller or Bodyshop Manager or automotive quality controller or Bodyshop quality controller....Read more...
General office duties.
Answering emails in a professional manner
Working as part of the sales team taking enquires via phone and email
Placing purchase orders with suppliers
Researching information on vehicle parts on behalf of customers
Processing orders and responding to customer requests for information
Completing a project that is beneficial to the company
Personal Specification:
Have (or be predicted to achieve) at least 5 GSCE’s grade 4 to 9 including English and math’s
Great communication skills (verbal and written).
Strong attention to detail
Be self-motivated and able to work as part of a close team
This role will be supported by Starting Offs Level 3 Business Administrator qualification the specified off-the-job training time.
The ideal candidate will have an upbeat personality, be confident, eager to succeed and have an interest in cars/performance vehicles.Training:
Level 3 Business Administration
Remote training delivery
Onefile
VLE6 hours of dedicated training time every week
Training Outcome:
Possible full time permanent position upon completion of the apprenticeship
Employer Description:Established in 2004 my client is a distributor of performance and turning products to the automotive market. They aim to provide the best service, brands, and prices to their dealer network. They supply products to a wide range of companies comprising of specialist tuners, high street stores, mail order retailers and individuals using various online retailers such as Ebay and promoting products on social media platforms such as Facebook and Instagram.
Due to increased business the company are looking for a confident, organised and enthusiastic apprentice to join their busy admin team.Working Hours :Monday - Friday, 8.30am - 5.00pm and Friday finish at 4.00pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Join GTR (Global Racing Technologies) and take the first step towards an exciting future in advanced manufacturing—supported by a team that values your development every step of the way.
What you will gain:
-Developed skills in producing high end composite components across various industries including motorsport, automotive and aerospace whilst studying for your Composite Technicians Level 3 Apprenticeship
-Commitment to creating a positive, inclusive workplace where our people can learn, grow, and build rewarding careers
Key Responsibilities:
-Selection of appropriate techniques and procedures to produce components
-Handling of composite materials and the established health & safety procedures
-Understanding the correct storage and applications of composite materials
-Understanding of different types of resins and adhesives for bonding and assembly
-Production of carbon fibre mould tools and preparation procedures
-Manufacturing of individual components across a range of sectors
-Reading and understanding of technical drawings and procedure manuals
-Laminating of geometrically complex components and assembly techniques
-Health & Safety, Inspection and Project Management procedures
Who you will be:
-Someone with a strong interest in manufacturing and engineering of motorsport
-Someone looking to build a career in engineering and composite manufacturing
-Someone committed and willing to learn
-Someone hardworking with a positive ‘can-do’ attitude
-Someone who can travel between locationsTraining Outcome:On successful completion of the apprenticeship there will be opportunity to experience different disciplines and departments within the organisation. Potential to continue study at Level 4 and beyond.Employer Description:GTR is an industry leading composite manufacturing company, and prides itself on delivering quality high-end products, with excellent service to all our customers, whilst ensuring that we create a great place to work for everyone. GTR is proud to be an inclusive & equal opportunities employer.Working Hours :Monday- Friday- 08.00am- 4.30pm with half hour for lunch and 2 x 15-minute breaks during the day.Skills: Communication skills,Attention to detail,Number skills,Team working,Strong work ethic,Hardworking,Reliable,Punctual,Positive can-do attitude,Dedication....Read more...
As an apprentice Vehicle Damage Assessor, your role will be varied and interesting - no two days will be the same!
Typically, duties will include:
Inspecting and assessing accident-damaged vehicles
Researching repair methods to work out the correct and safe repair required for each individual vehicle
Using specialist software to produce work instructions and costings
Liaise with technical colleagues, customers and insurance companies to negotiate the repair
Training:
Our training partner will deliver a high-quality programme here in our state-of-the-art body shop alongside a highly skilled mentor - both will support you in becoming a skilled and qualified vehicle damage assessor
Once the apprenticeship is complete, you will achieve a Level 4 Apprenticeship qualification in Vehicle Damage Assessor
Training Outcome:
Following completion of your apprenticeship, you can expect permanent employment as well as opportunities to progress into roles such as Workshop Controller or Bodyshop Manager
The opportunities are endless
Having a highly regarded set of skills, apprentices can go on to develop their careers within the automotive sector, following their own interests and ambitions
Employer Description:SMART Bodyshop Solutions Group Ltd is the UK’s Largest Independent Fleet Repair Network providing an efficient turnaround time with value for money vehicle body repairs.
SMART Bodyshop Solutions at Peterborough offers a complete vehicle, LCV and HGV body repair solution. Our operations facility, offering a firm focus on quality repairs, cycle time and a Key-to-Key service.
The group operate to BS10125 British Kitemark Standards and focus on the individual needs of our customers. An excellent team of highly trained technicians use a forward-thinking production model. This sets SMART Bodyshop Solutions' performance ahead of the competition, creating a Win-Win for all clients.Working Hours :Typically Monday - Friday, 8.30am - 4.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
As an apprentice Vehicle Damage Assessor, your role will be varied and interesting - no two days will be the same!
Typically, duties will include:
Inspecting and assessing accident-damaged vehicles
Researching repair methods to work out the correct and safe repair required for each individual vehicle
Using specialist software to produce work instructions and costings
Liaise with technical colleagues, customers and insurance companies to negotiate the repair
Training:
Our training partner will deliver a high-quality programme here in our state-of-the-art body shop alongside a highly skilled mentor - both will support you in becoming a skilled and qualified vehicle damage assessor
Once the apprenticeship is complete, you will achieve a Level 4 Apprenticeship qualification in Vehicle Damage Assessor
Training Outcome:
Following completion of your apprenticeship, you can expect permanent employment as well as opportunities to progress into roles such as Workshop Controller or Bodyshop Manager
The opportunities are endless
Having a highly regarded set of skills, apprentices can go on to develop their careers within the automotive sector, following their own interests and ambitions
Employer Description:SMART Bodyshop Solutions Group Ltd is the UK’s Largest Independent Fleet Repair Network providing an efficient turnaround time with value for money vehicle body repairs.
SMART Bodyshop Solutions at Exeter offers a complete vehicle, LCV and HGV body repair solution. Our operations facility, offering a firm focus on quality repairs, cycle time and a Key-to-Key service.
The group operate to BS10125 British Kitemark Standards and focus on the individual needs of our customers. An excellent team of highly trained technicians use a forward-thinking production model. This sets SMART Bodyshop Solutions' performance ahead of the competition, creating a Win-Win for all clients.Working Hours :Typically Monday - Friday, 8.30am - 4.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
As an apprentice Vehicle Damage Assessor, your role will be varied and interesting - no two days will be the same!
Typically, duties will include:
Inspecting and assessing accident-damaged vehicles
Researching repair methods to work out the correct and safe repair required for each individual vehicle
Using specialist software to produce work instructions and costings
Liaise with technical colleagues, customers and insurance companies to negotiate the repair
Training:
Our training partner will deliver a high-quality programme here in our state-of-the-art body shop alongside a highly skilled mentor - both will support you in becoming a skilled and qualified vehicle damage assessor
Once the apprenticeship is complete, you will achieve a Level 4 Apprenticeship qualification in Vehicle Damage Assessor
Training Outcome:
Following completion of your apprenticeship, you can expect permanent employment as well as opportunities to progress into roles such as Workshop Controller or Bodyshop Manager
The opportunities are endless
Having a highly regarded set of skills, apprentices can go on to develop their careers within the automotive sector, following their own interests and ambitions
Employer Description:SMART Bodyshop Solutions Group Ltd is the UK’s Largest Independent Fleet Repair Network providing an efficient turnaround time with value for money vehicle body repairs.
SMART Bodyshop Solutions at Scunthorpe offers a complete vehicle, LCV and HGV body repair solution our operations facility, offering a firm focus on quality repairs, cycle time and a Key-to-Key service.
The group operate to BS10125 British Kitemark Standards and focus on the individual needs of our customers. An excellent team of highly trained technicians use a forward-thinking production model. This sets SMART Bodyshop Solutions' performance ahead of the competition, creating a Win-Win for all clients.Working Hours :Monday - Friday, 8.30am - 4.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
As an apprentice Vehicle Damage Assessor, your role will be varied and interesting - no two days will be the same!
Typically, duties will include:
Inspecting and assessing accident-damaged vehicles
Researching repair methods to work out the correct and safe repair required for each individual vehicle
Using specialist software to produce work instructions and costings
Liaise with technical colleagues, customers and insurance companies to negotiate the repair
Training:
Our training partner will deliver a high-quality programme here in our state-of-the-art body shop alongside a highly skilled mentor - both will support you in becoming a skilled and qualified vehicle damage assessor
Once the apprenticeship is complete, you will achieve a Level 4 Apprenticeship qualification in Vehicle Damage Assessor
Training Outcome:
Following completion of your apprenticeship, you can expect permanent employment as well as opportunities to progress into roles such as Workshop Controller or Bodyshop Manager
The opportunities are endless
Having a highly regarded set of skills, apprentices can go on to develop their careers within the automotive sector, following their own interests and ambitions
Employer Description:SMART Bodyshop Solutions Group Ltd is the UK’s Largest Independent Fleet Repair Network providing an efficient turnaround time with value for money vehicle body repairs.
SMART Bodyshop Solutions at Cornwall offers a complete vehicle, LCV and HGV body repair solution. Our operations facility, offering a firm focus on quality repairs, cycle time and a Key-to-Key service.
The group operate to BS10125 British Kitemark Standards and focus on the individual needs of our customers. An excellent team of highly trained technicians use a forward-thinking production model. This sets SMART Bodyshop Solutions' performance ahead of the competition, creating a Win-Win for all clients.Working Hours :Typically Monday - Friday, 8.30am - 4.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
Learn purchasing approval processes and how internal teams interact with suppliers.
Gain experience using ERP systems (e.g. Dynamics AX) and BI tools for spend reporting and supplier data.
Support core procurement processes including RFQs, contract approvals, and compliance requirements.
Support live Requests for Quotation (RFQs) by gathering data and preparing quotation comparisons.
Track and monitor supplier KPIs including cost, quality, and delivery performance.
Gain exposure to forecasting and demand planning processes.
Learn how demand fluctuations influence purchasing decisions, stock levels, and supplier capacity.
Conduct supplier communication, bid analysis, and recommendation preparation.
Monitor supplier performance and maintain KPI dashboards.
Build commercial awareness through market research and supplier reviews.
Analyse risks, cost drivers, and market trends.
Manage supplier performance, relationships, and continuous improvement activities.
Training:
Working towards Supply Chain Practitioner Level 3 apprenticeship standard. Training will take place at the employer's site.
Training Outcome:Fixed-term for the duration of apprenticeship with a view to turn permanent. We are highly committed to providing opportunities for personal and professional growth and maintain a strong focus on training and development. We strive to create an engaging and supportive work environment where our employees can thrive. Gradual progression, development and career road map advancing to Junior Buyer, Buyer, Strategic Buyer, then funded CIPS qualificationsEmployer Description:CMR UK Ltd is a North-Tyneside-based manufacturer of industrial engine controls and instrumentation, wiring systems, harnesses and sensors.Established in 1984, we are a part of a global manufacturing business with operations in more than 40 countries. The business manufactures components that are supplied into performance-critical sectors including Power Generation, Marine, Automotive and Rail.Working Hours :Monday - Friday. Flexible start and finish times. Generally people start between 7am-9 am and finish between 4pm-6pm. Employers can be flexible with arranging the suitable start and finish times for the apprentice depending on their commute time.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Working within the AS9100, ISO9001 Manufacturing & ISO17025 Laboratory Environment and adhering to all process, procedures and local work instructions of the Quality Management System as applicable to role and duties below:
Collating, reviewing, approving and uploading part certification data to customer portal systems to ensure timely and conforming product certification
Logging, creating and uploading concession requests and processing concession Customer disposition.
Review of all closed Route cards to ensure that all operations have been completed and the document has been completed correctly and that the corresponding interactions on Mie Trak have been completed
Management, audit and maintenance of the company quality inspection record archive to ensure that all relevant data is recorded, legible, available and readily retrievable on request
Assisting the Inspection Team Leader in compiling of work load data and KPI’s to assist the daily visual management meetings
Any other administrative tasks within the capability of the employee as required by the Quality function
Training:
This is a Business Administration Level 3 apprenticeship which is delivered over an 18-month period
You will be required to attend an initial induction period and training workshops at the training site, In-Comm Training Services in Aldridge, WS9 8UG, followed by monthly assessor visits to you in your company
Training Outcome:
Upon successful completion of the apprenticeship, there will be a full-time position available within the company
Employer Description:Keeping the world’s most demanding and high profile industries ahead of the competition is what we do.
Precision cut and ground gears, splines, threads and gauges as well as tooling are created to deliver to the most exacting specifications to meet the demands of industries including automotive, aerospace, motorsport, oil and gas, marine and defence. It’s thanks to a unique combination of skills, equipment and metrology that combines to make every component perfect. It’s precision engineering with precision delivery.Working Hours :Monday to Thursday, 8.00am to 5.00pm. 8.00am to 1.00pm on Fridays.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Administrative skills,Analytical skills,Team working,Initiative,Patience,Persistence,Motivated....Read more...
Prepare accounts for a range of clients, gaining hands-on experience in financial reporting and year-end account preparation
Assist with the preparation and submission of VAT returns, ensuring accuracy and compliance with current regulations.
Support the completion of personal and corporation tax work, including calculations, documentation, and submissions
Carry out bookkeeping tasks such as recording financial transactions, reconciling accounts, and maintaining accurate client records
Provide general office and administrative support, including managing correspondence, organising files, and assisting with day-to-day business operations
Work closely with experienced professionals to develop practical accounting knowledge and build valuable skills for a long-term career in finance and accountancy
Training:
Level 3 Assistant Accountant Apprenticeship Standard
Training is delivered by Birmingham Metropolitan College in partnership with Mindful Education, combining online learning with face-to-face classroom lessons through a blended delivery model
At least 20% of your working hours will be dedicated to training or study
Training Outcome:Successful completion of the Level 3 Assistant Accountant apprenticeship may lead to a permanent role within the business, with progression opportunities into positions such as Assistant Accountant or Accounts Technician. The apprentice may also progress onto further professional study, including the Level 4 Professional Accounting / Tax Technician apprenticeship, supporting long-term career development within accountancy and finance.Employer Description:We offer a variety of general services to include accountancy, book keeping, management accounts, audit, taxation, consultancy, payroll and Auto Enrolment pension management to a wide range of local, regional and national businesses across the UK. Some of whom also have International presence as well. The practice supports over 500 clients across a whole range of sectors from the service and financial sector to the manufacturing and automotive trade, from fast food and restaurant chains to hair salons and charities, we have expertise to ensure you receive expert advice regardless of size or sector within which you work.Working Hours :Monday - Thursday 9.00am - 5.00pm with a 1 hour break each day and Friday 9.00am - 4.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Patience....Read more...
The Kia Light Vehicle Technician Apprenticeship programme will support the apprentice to gain the knowledge and skills needed to become a fully qualified and accredited Kia vehicle technician, qualifying them to be responsible for:
Servicing vehicles
Repairing and replacing faulty parts and components
Advising the Service Advisor about faults and required repairs
Contact with customers about work required
Diagnosing and repairing complex vehicle faults
Training:Kia Apprenticeship Programme operates using a 12-week cycle. Within each 12-week period, apprentices will receive the following teaching, learning and assessment:
One college block attendance with teaching delivered by dedicated Tutors (both via Virtual Classroom Training and face-to-face at the Kia Academy in Derby)
One workplace visit face-to-face with their dedicated Skills Coach
One tripartite progress review involving the Apprentice, Skills Coach and their workplace mentor
One 1:1 teaching session with their dedicated Skills Coach via virtual classroom
Training Outcome:
Upon completion of the Kia Technician Apprenticeship, apprentices have the opportunity to transition into Senior Technician, Master Technician, EV Specialist, and Service/Aftersales Manager roles
Kia is committed to growing the automotive talent pool with Electric Vehicle Specialists
Employer Description:Drive your future with usReady for a career that actually feels good? At Drayton Motors, we’re all about real people, real opportunities and workplaces where you can be yourself. No corporate nonsense. No egos. Just a team that gets on and gets things done.
If you’ve got the right attitude, we’ll give you the support, training and progression to go as far as you want.
Drive your future. Join a team that moves with you.Working Hours :Apprentices will be expected to work Monday- Friday, shifts to be confirmed (with the exception of weekends as per the requirements of the dealership).Skills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working,Initiative....Read more...
Join an expanding team in Gloucestershire as an Assembly Fitter to keep up with their growing business. This is a fantastic opportunity to build a career in a thriving company.As an Assembly Fitter, you'll be part of a dynamic team working with cutting-edge tools and industry leaders in aircraft production. You'll have the chance to work on prestigious aircraft models like the A320 and A330 family, using advanced equipment such as zero gravity lifting and snap-on computerised toolboxes.You'll work on a regularly rotating shift pattern, covering dayshifts and nightshifts (which include a premium shift payment of 38.5% of your salary). Occasionally, there'll be options for working bridging shifts and weekend shifts too.Roles: Assembly Technician, Assembler, Assembly Operative, Production Operator, FitterWhat's in it for you?Competitive starting salary from £35,000, with the potential to increase after completing your training within 18-24 months.Exciting career development opportunities within their growing team.Flexible benefits package through our 'On Board Benefits' Programme, including options like cycle to work schemes, technology savings, retail discounts, healthcare access, sports clubs, and more.What do I need?You'll already have Fitting experience from a previous role, ideally in an Aerospace or Automotive environment. We're looking for someone with:A completed Apprenticeship in Mechanical Engineering.The ability to follow technical drawings, specs, procedures, and test instructions.A desire to learn and understand the basic principles of production flow lines, and takt times.Knowledge of COSH and flow line methodologies is ideal, but not essential for you to applyAnything else I need to know?As a valued member of our team, you'll be entitled to a range of company benefits, including:25 days holiday + UK Bank Holidays, plus the option to buy/sell annual leave.A generous pension scheme, up to 8% employer match.Our Shares and profit share bonus schemeAnd much more!Work Permissions:You must have the right to work in the United Kingdom. Visa sponsorship is not available at this time.....Read more...
The Service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Autocare Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As a Autocare Technicians/Mechanics apprentice, some of your duties will include:
· Use of diagnostic equipment to identify vehicle faults.
· Testing of parts and systems to ensure correct working.
· Following checklists to ensure all critical parts of vehicles are examined.
· Carrying out bumper to bumper overview, service, and inspection.
· Maintenance of electronic systems including on- board entertainment systems.
· Completion of legible and accurate paperwork for the customers and centres records
· Maintenance of a clean and tidy work environment.
You will have the opportunity to work with a wide range of products including traditional, hybrid and electronic engines. From heritage vehicles to leading edge modern technology, our range will provide you with a varied technical training experience to build your skills as a Autocare Technician/Mechanic.
Desired skills & Experience
Our ideal candidate will be able to demonstrate skills in logic and problem solving. You should be someone who pays attention to detail and is committed to completing this apprenticeship programme.
We are looking for people who have some experience in the motor industry either with formal training at Level 1 or having worked at or within a similar organisation. You should be passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
· Enthusiasm and willingness to learn
· Teamwork
· Strong communication
· Customer Service
· Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long term career, with excellent earning and progression opportunities once you complete your apprenticeship.
A Level 1 in Light Vehicle Maintenance and Repair is desirable.Training:
Training will be delivered using a combination of virtual classroom remote learning and face-to-face block release weeks at our state-of-the-art training centre
Successful applicants are required to travel to a centrally located training facility to complete their apprenticeship training. All training-related costs are fully covered as part of the programme, including travel, accommodation, and meals
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and the training centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications
On successful completion of the apprenticeship programme, you will receive the following:
Level 2 Apprenticeship Standard in Autocare Technician
Certificate in Automotive Refrigerant Handling
Level 2 qualification for safe isolation of electric and hybrid vehiclesBrand specific certifications
Progression towards Level 3 apprenticeship standard in Light Vehicle Maintenance and Repair
What we offer:
Block release training
A full Halfords toolkit, uniform and work boots supplied
A mentor in your garage to support you through the apprenticeship
A 40 hour working week if you are under 18 or 44 hours per week if you are over 18
Permanent role upon successful completion of your apprenticeship
Continued development and training opportunities with Hybrid/Electric Vehicle and MOT training
Training Outcome:
Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity drive your career forward
Some of our apprentices have gone on to become team leaders and managers within the retail network
Employer Description:At Halfords, we're all about the journey. With more than 600 stores with over 10,000 colleagues, we're the UK's leading retailer of automotive and cycling products. We are also the leading operator in MOT, tyres, car servicing and car repairs - pleasing more than 750,000 customers every year. We pride ourselves in offering the highest quality motoring products to ensure you get the job done safely and efficiently.
The Halfords apprenticeship programme will equip you with all the skills, knowledge and behaviours you need to start a successful career with us. We have over 700 garages across England, Scotland and Wales where our highly trained Technicians carry out MOT’s, car servicing and repairs for over one million customers a year. As a Halfords apprentice, you will master a range of technologies across all kinds of cars – that’s a lot of valuable, career enhancing knowledge.Working Hours :Monday – Friday, 08:30 - 17:30.
Possibility of Saturday workings and / or shifts.
Working week will be confirmed on application.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
The service department is vital to the success of our business. From right first-time fixes, to delivering excellent customer service, our Autocare Technicians/Mechanics play a pivotal role in delighting our customers and encouraging their continued loyalty.
Every day is different within the Service department. As an Autocare Technician/Mechanics apprentice, some of your duties will include:
Use of diagnostic equipment to identify vehicle faults.
Testing of parts and systems to ensure correct working.
Following checklists to ensure all critical parts of vehicles are examined.
Carrying out bumper-to-bumper overview, service, and inspection.
Maintenance of electronic systems, including on- board entertainment systems.
Completion of legible and accurate paperwork for the customers and the centre's records
Maintenance of a clean and tidy work environment.
You will have the opportunity to work with a wide range of products, including traditional, hybrid and electronic engines. From heritage vehicles to leading-edge modern technology, our range will provide you with a varied technical training experience to build your skills as an Autocare Technician/Mechanic.
Desired skills & Experience
Our ideal candidate will be able to demonstrate skills in logic and problem-solving. You should be someone who pays attention to detail and is committed to completing this apprenticeship programme.
We are looking for people who have some experience in the motor industry, either with formal training at Level 1 or having worked at or within a similar organisation. You should be passionate about our industry and our brand. Some of the personal skills that you should think about showing us in your application are:
Enthusiasm and willingness to learn
Teamwork
Strong communication
Customer Service
Interest in vehicle engineering
We are looking for an enthusiastic, hardworking individual to join our team and embark on a long-term career, with excellent earning and progression opportunities once you complete your apprenticeship.
A Level 1 in Light Vehicle Maintenance and Repair is desirable.
Training:Training will be delivered using a combination of virtual classroom, remote learning and face-to-face block release weeks at our state-of-the-art training centre.
Successful applicants are required to travel to a centrally located training facility to complete their apprenticeship training. All training-related costs are fully covered as part of the programme, including travel, accommodation, and meals.
In the workplace, your personal, dedicated mentor will support your continued learning as you apply the skills and knowledge you have gained through the remote sessions and the training centre.
This is a fully rounded training experience where you will build life skills that last and gain both apprenticeship qualifications and brand certifications.
On successful completion of the apprenticeship programme, you will receive the following:
Level 2 Apprenticeship Standard in Autocare Technician
Certificate in Automotive Refrigerant Handling
Level 2 qualification for safe isolation of electric and hybrid vehicles
Brand-specific certifications
Progression towards Level 3 apprenticeship standard in Light Vehicle Maintenance and Repair
What we offer:
· Block release training
· A full Halfords toolkit, uniform and work boots supplied
· A mentor in your garage to support you through the apprenticeship
· A 40 hour working week if you are under 18 or 44 hours per week if you are over 18
· Permanent role upon successful completion of your apprenticeship
· Continued development and training opportunities with Hybrid/Electric Vehicle and MOT trainingTraining Outcome:Once your apprenticeship is complete, you will continue your learning journey and you will have the opportunity drive your career forward. Some of our apprentices have gone on to become team leaders and managers within the retail network.Employer Description:At Halfords, we're all about the journey. With more than 600 stores with over 10,000 colleagues, we're the UK's leading retailer of automotive and cycling products. We are also the leading operator in MOT, tyres, car servicing and car repairs - pleasing more than 750,000 customers every year. We pride ourselves in offering the highest quality motoring products to ensure you get the job done safely and efficiently.
The Halfords apprenticeship programme will equip you with all the skills, knowledge and behaviours you need to start a successful career with us. We have over 700 garages across England, Scotland and Wales where our highly trained Technicians carry out MOT’s, car servicing and repairs for over one million customers a year. As a Halfords apprentice, you will master a range of technologies across all kinds of cars – that’s a lot of valuable, career enhancing knowledge.Working Hours :Monday – Friday. 0830 – 1730.
Possibility of Saturday work and/or shifts.
Working week will be confirmed on application.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Logical,Team working....Read more...
Parts Advisor – Commercial Vehicle
Are you an experienced Parts Advisor with commercial vehicle parts knowledge looking for a secure, long-term career opportunity? This is your chance to join a highly respected business that genuinely values its people, offers excellent stability, and supports ongoing career development within a successful and growing team.
Location: Easily commutable from Retford, Doncaster, Bawtry, Gainsborough, Worksop, Rotherham, Tuxford, Rampton, Lincoln, Newark-on-Trent, Chesterfield, Clowne.
Salary: Circa £40,000 basic + Bonus + Pension + 28 days holiday (including Bank Holidays) + Free onsite parking.
The Role
This is an excellent opportunity for a motivated Commercial Vehicle Parts Advisor to join a well-established business with a strong reputation in the industry. You’ll play a key role in supporting customers, building long-term relationships, and contributing to the continued success of the parts department. The company offers a stable working environment, strong team culture, and genuine opportunities for progression and personal development.
Key Responsibilities
Provide expert advice on commercial vehicle parts and accessories.
Process, manage, and track customer orders accurately and efficiently.
Build and maintain strong customer relationships through excellent service.
Make proactive customer calls to provide updates and support ongoing requirements.
Ensure customer records and internal systems are kept fully up to date.
Skills & Experience
Minimum 2 years’ experience as a Parts Advisor (commercial vehicle experience preferred).
Strong commercial vehicle product knowledge and customer service skills.
Confident communicator with strong organisational ability.
Experience using computer-based order processing and account management systems.
Register your Interest:
If you are looking for a rewarding role with long-term stability, excellent earning potential, and real career development opportunities, send your CV to Robert Cox at or call 07398 204832 for a confidential chat.
Glen Callum Associates Ltd – Automotive Aftermarket Recruitment Specialists
Job Ref: 4214RCC – Parts Advisor (Commercial Vehicle)
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know—we’re here to support you.....Read more...
Field Service Engineer
Newcastle
£30,000 - £33,000 Basic + OTE (£45'000) + Training + Progression + Vehicle + Mobile + Pension
Earn over £45,000 as a field service engineer working for the BEST and most successful company in their industry! You’ll get full training on their products as well as recognition and reward for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery / equipment used in the automotive industry UK wide. Due to continued growth and an overflowing order book, they are looking for a field service engineer who wants to earn £45,000 through overtime, to join their highly experienced team. You’ll have opportunity to develop your skills through continuous training and work for the best in the industry.
Your Role As Field Service Engineer Will Include:
* Field service engineer role - Full product training given* Mechanical servicing of MOT equipment / Garage equipment* Complete maintenance and servicing of machinery - hydraulics / lifting equipment / mechanical fitting / bearings and more.* Regional cover field service engineer role - No stay away required!
As the Successful Field Service Engineer You’ll Have:
* Good mechanical engineering knowledge and skills - machinery / industrial* Background as a mechanical fitter / mechanic / Garage Equipment / field service engineer / technician (or similar)* Ex-forces engineers welcomed* Live around the Nort East and be willing to travel as a field service engineer
Please apply or contact Charlie Auburn for immediate consideration
Keywords: Field service engineer, Technician, Mechanic, Garage Equipment, Torque Wrenches, Garage, Newcastle, Sunderland, North East, Central Belt, ex-forces, REME
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Senior Pricing & Commercial Analyst
We are recruiting for a highly analytical and commercially astute Pricing & Commercial Analyst to take ownership of pricing strategy, commercial analysis, and data-driven decision making across a large and complex product portfolio.
This is an excellent opportunity for a pricing professional with advanced Excel and reporting capabilities who enjoys working independently with large data sets, identifying opportunities for improvement, and implementing commercial process enhancements that drive profitability and operational efficiency.
Whilst exposure to automotive aftermarket, heavy-duty vehicle, bus, engineering, manufacturing, or other technical B2B sectors would be advantageous, the key requirement is a candidate with exceptional analytical and systems skills who can confidently gather, manipulate, analyse, and present complex commercial data to support strategic business decisions.
Northampton | Hybrid Working
Basic Salary Circa £55,000 + Bonus + 25 Days Holiday + Bank Holidays (32 Days Total) + Pension + Career Progression
The Role
Working closely with Sales, Purchasing, Operations, and suppliers, you will lead pricing activities across thousands of SKUs, ensuring pricing accuracy, margin optimisation, commercial competitiveness, and robust reporting.
Essential Experience
Experience within a Pricing Analyst, Commercial Analyst, Pricing Manager, Commercial Manager, Revenue Management, Category Analyst, or similar role.
Advanced Microsoft Excel skills including complex formulas, lookups, pivot tables, data modelling, and reporting.
Proven ability to independently gather, cleanse, manipulate, analyse, and present large data sets.
Strong reporting and business intelligence capability.
Experience working with ERP, MRP, PIM, or business management systems such as SAP, Sage, Dynamics, or similar.
Manage pricing, commercial analysis, or reporting activities across large SKU portfolios.
This position would suit a commercially minded pricing specialist who enjoys turning data into actionable business insight and has the confidence to challenge, improve, and influence commercial decision making through robust analysis and reporting.
To register your interest, please contact Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd, on 07398 204832 or email your CV
JOB REF: 4321RCA – Pricing & Commercial Analyst
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know – we’re here to support you.....Read more...
Senior Pricing & Commercial Analyst
We are recruiting for a highly analytical and commercially astute Pricing & Commercial Analyst to take ownership of pricing strategy, commercial analysis, and data-driven decision making across a large and complex product portfolio.
This is an excellent opportunity for a pricing professional with advanced Excel and reporting capabilities who enjoys working independently with large data sets, identifying opportunities for improvement, and implementing commercial process enhancements that drive profitability and operational efficiency.
Whilst exposure to automotive aftermarket, heavy-duty vehicle, bus, engineering, manufacturing, or other technical B2B sectors would be advantageous, the key requirement is a candidate with exceptional analytical and systems skills who can confidently gather, manipulate, analyse, and present complex commercial data to support strategic business decisions.
Northampton | Hybrid Working
Basic Salary Circa £55,000 + Bonus + 25 Days Holiday + Bank Holidays (32 Days Total) + Pension + Career Progression
The Role
Working closely with Sales, Purchasing, Operations, and suppliers, you will lead pricing activities across thousands of SKUs, ensuring pricing accuracy, margin optimisation, commercial competitiveness, and robust reporting.
Essential Experience
Experience within a Pricing Analyst, Commercial Analyst, Pricing Manager, Commercial Manager, Revenue Management, Category Analyst, or similar role.
Advanced Microsoft Excel skills including complex formulas, lookups, pivot tables, data modelling, and reporting.
Proven ability to independently gather, cleanse, manipulate, analyse, and present large data sets.
Strong reporting and business intelligence capability.
Experience working with ERP, MRP, PIM, or business management systems such as SAP, Sage, Dynamics, or similar.
Manage pricing, commercial analysis, or reporting activities across large SKU portfolios.
This position would suit a commercially minded pricing specialist who enjoys turning data into actionable business insight and has the confidence to challenge, improve, and influence commercial decision making through robust analysis and reporting.
To register your interest, please contact Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd, on 07398 204832 or email your CV
JOB REF: 4321RCA – Pricing & Commercial Analyst
Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know – we’re here to support you.....Read more...
Bodyshop Controller Vacancy:
We are currently partnering with a forward-thinking and rapidly expanding Accident Repair Group to recruit an experienced Bodyshop Controller for their busy site in the Binfield area.
This business has built an outstanding reputation for delivering high-quality vehicle repairs with exceptional attention to detail and customer care. Working alongside some of the automotive industry's most innovative manufacturers, they continuously invest in their people, processes, and technology to stay ahead of the competition.
Successful candidates will enjoy working in a modern, state-of-the-art repair environment, supported by ongoing training and development opportunities designed to help you enhance your skills and progress your career.
Key Bodyshop Controller Responsibilities:
- Lead and support the workshop team, ensuring all repairs and refinishing work are completed to the highest quality standards and manufacturer specifications.
- Drive productivity and workflow efficiency by working closely with technicians, painters, and estimators throughout the repair process.
- Foster strong communication and collaboration across all departments to ensure seamless vehicle progression and an exceptional customer experience.
- Monitor and maintain compliance with all health and safety regulations, promoting a safe and professional working environment.
- Inspire, motivate, and manage productive staff, helping the team achieve both individual and site performance targets.
- Work alongside estimators and management to maximise workshop efficiency, profitability, and customer satisfaction.
- Conduct thorough quality control inspections, identifying any paint defects, panel alignment issues, fitting concerns, or imperfections before vehicle handover.
- Ensure all repair methods, procedures, and parts usage comply with manufacturer standards and industry best practices.
As a Bodyshop Controller you will have:
- Previous experience as a Bodyshop Controller, Workshop Controller, or a senior productive role within a busy accident repair centre.
- Experience using Autoflow would be highly advantageous.
- Strong IT and administration skills with confidence using workshop management systems.
- A keen eye for detail and proven experience carrying out quality assurance inspections and defect identification.
- Knowledge of manufacturer repair standards, compliance requirements, and quality control processes.
- The confidence to provide constructive feedback and work closely with technicians to maintain exceptional repair standards.
- Excellent communication and relationship-building skills with both colleagues and customers.
- A proactive and driven approach, with the ability to lead teams, work under pressure, and consistently deliver results.
Benefits:
- Salary up to £50,000 per annum plus bonus
- 45 hours per week, Monday to Friday
- 23 Days Holiday + Bank Holidays
- Excellent Company Benefits
- Permanent Role
If you would like to find out more about this Bodyshop Controller opportunity, please submit your CV by clicking \'Apply Now\' or contact Piam on 01202 552915 or piam@holtautomotive.co.uk for a confidential discussion.....Read more...
