Catfoss Recruitment Ltd are currently in partnership with a cutting-edge technology company that is looking to recruit an Electrical Engineer to their expanding team on a permanent basis.Building on more than two decades of science led research and development, our client designs and manufactures pioneering power generation technology.What we are looking forYou will work in the Electrical, Instrumentation and Control team. The electrical engineer is in charge of the specifying right technical specification of power supply unit on Proposals, FEED and EPC Projects. Key interactions of the electrical engineer are internally with Project teams, Procurement, Compliance, Quality and others engineering disciplines, externally with Clients, Vendors, Suppliers.Responsibilities• Prepare the power electronics technical specification and hardware planning with respect to regional grid connection conditions and project requirements• Design and preparation of power supply unit specifications based on international design codes and standards (IEC, NE, ATEX, CE)• Develops electrical system architecture, electrical system requirements, electrical schematics, harness drawings, single line drawings and field wiring diagrams• Participate in new product development teams• The design and development of complex busbar and cable interconnections• Assist in the development of plant layout, to reflect electrical design considerations• Creating equipment specifications (transformers, rectifiers, switch boards)• Approval, checking and preparation of design/engineering documentation (e.g. cable schedules, single line diagrams, load schedules.)• Act as a technical authority on electrical issues• Creating Bills of Material/equipment lists and single line diagrams• Carrying out cable calculations• You play an essential role in risk assessments, which make a key contribution to the safety and quality of our products• Review engineering deliverables prepared by external engineering contractors• Conduct power supply unit technical analysis and final supplier selection based on quality, technical and commercial considerations (Bid review based on good engineering practice)• Managing of FEED, basic and detailed engineering phase and technical follow up ensuring proper communication with vendors• You manage budget, schedule and quality constraints, lead the determination of total cost of installation in cooperation with other disciplines and performing meetings with suppliers• Vendor document management within proposals phase and project executionAbout YouKnowledge and Experience• Bachelor’s or master’s degree level or equivalent, in Electrical Engineering• 5+ years of experience in electrical and hardware planning for process engineering (large-scale)• Extensive knowledge of the current European and North American standards and regulations in electrical engineering• Experience in the field of electrical protection concepts• Good command of technical documentation• Familiar with hardware planning using electrical CAD systems• Superior communication skills• Ability to manage projects and multi-task effectively• Excellent follow-through• Must be driven and self-motivated• Understand safety, compliance, statutory and regulatory requirements• European travel is essential in this role so you must have availability to travel internationally to site and vendors workshop• Capable of critical thinking with solid decision-making skills• Strong time management skills, including prioritisation management• Proficient with Microsoft suite of products, particularly ExcelHighly advantageous• Experience with hazardous area design and equipment selection – in accordance with ATEX standards (60079)• Additional technical know-how in SOEC, SMR, fuel cells, clean fuel, energy storage systems and/or chemical synthesis (e.g. ammonia, methanol) is a plus• Experience in chemical process engineering in EPC in carrying out Pre-FEED / FEED / Detailed engineering work• A deep and thorough understanding of codes, regulatory requirements of hydrogen industry practices• Knowledge of ATEX Directive and other legislation related to explosive atmospheres• Proven history within a design engineering background working with high power equipment• Knowledge of electrical installation design• Knowledge of wiring and schematics• Some knowledge of grid connection, HV requirements and design is also preferred• Knowledge of protection and coordination desirable• Knowledge of rectifier units desirable• Knowledge of EMC requirements and standards desirableElectrical Engineer previous suitable job titles: Senior Electrical Engineer, Principal Electrical Engineer, Lead Electrical Engineer, Electrical Design Engineer, Electrical Power Engineer, Chartered Electrical Engineer, Chartered EngineerPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
JOB DESCRIPTION
DAP is looking for Engineering / Design Intern for Summer 2024.
Job Responsibilities
The summer intern would work under mentorship of Senior Design Engineer. Participate in assembly, testing, and evaluation of engineering prototypes. Conduct upfront engineering system research for new to market products. Utilize Solidworks CAD program to generate and update engineering documentation.
Requirements
Major: Mechanical Engineering College classification: Sophomore or Junior. Able to use Excel, Word and MS Project to complete assigned tasks. A working familiarity with Solidworks is preferrable. Candidate should have excellent communication skills since they will be interfacing with team members in Baltimore and in Fenton.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products. DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores. DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers. Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online!....Read more...
Land Surveyor / Senior Land Surveyor
Location: Leeds, West Yorkshire
Salary: £28,700 - £37,700 (DOE) + Excellent Benefits
Job Type: Full-Time, Permanent
The Client:
Our client is a well-established surveying services provider, providing a wide range of mapping services, including underground utility surveys and topographical land surveys.
The Role:
As a Land Surveyor / Senior Land Surveyor, you will be overseeing daily project management and on-site surveyor coordination.
Responsibilities:
* Conducting thorough land surveys and ensuring adherence to company protocols.
* Addressing on-site challenges including equipment, access, and safety.
* Collaborating with fellow surveyors, contractors, suppliers, and clients.
* Conducting quality control checks and managing CAD data.
* Guiding and training junior surveyors as needed.
* Offering technical assistance to Project Managers and internal team members.
Requirements:
Essential:
* Previously worked as a Land Surveyor or in a similar role.
* Minimum 5 years of land surveying experience.
* Relevant surveying qualification.
* Background in diverse environments and large complex surveying projects.
* Skilled in surveying equipment including total stations & GPS systems and AutoCAD.
* Knowledge of Microsoft Office Suite (Excel, Word, Outlook).
* Experience in staff mentoring / training.
* Valid UK driving licence.
* Right to work in the UK.
Desirable:
* Report writing and data processing experience.
* Familiarity with Bentley MicroStation, Atlas SCC software, LSS.
* Knowledge of Laser Scanners.
* Understanding of surveying industry standards.
Benefits:
* 25 days holiday
* Life assurance scheme
* Employer pension scheme
* Salary sacrifice cycle scheme
* Referral bonus scheme
* Absence pay scheme
* Discounts on shopping, gym, and cinema
* Company van, fuel card, laptop and phone
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Land Surveyor, Land Surveying, Surveyor, GIS Specialist, Topographic, Geomatics, engineer, jobs, GIS, Geomatics Surveyor, Geomatics, Cadastral Surveyor, Geodetic Surveyor, Cadastral, Geodetic, surveying equipment, land survey, equipment
....Read more...
Senior Engineer 6 months on-going contract, Inside IR35 Newcastle-under-lyme Job Purpose To lead with the support of the Facilities and Engineering Manager in all car parking matters and undertake key engineering roles within the team.Responsibilities
Knowledge of Traffic Regulation Orders and timescales and processes of Public Notices and Public Consultation processes including placing Public Notices in Newspapers/other Publications (we do so via our Planning Authority Dept)
Knowledge of Street Works and similar Highways Acts
Knowledge of how to place orders for street nameplates.
Awareness of Highways Lighting standards including for Public Parks/Public Open Spaces (and some knowledge of low carbon)
Familiarity with Playing Fields and similar Catchment/Collector Drains designs and outfalls designs.
Familiarity with drainage pipework Engineering sizing and flow capacities, manholes construction, groundworks stabilisation procedures
A no need to Manage Civil Enforcement Officers, but familiarity with Car Parking Regulations, Enforcement and Appeals processes.
A working knowledge of Electric Vehicle infrastructure and electrical works related to Electric Vehicle Charger Points (ideally both on-street and off-street in Public Car Parks etc.)
To help to manage the Civil Parking Enforcement Service.
To undertake routine CCTV system checks, maintenance and ad hoc requests and problems as may be required.
To carry out the street naming and property numbering functions for all new developments and any requests for changes.
To manage requests for all utility information.
To lead on the maintenance/management of the car parks and street/footpath lighting.
To assist with all aspects of Civil Contingencies (Emergency Planning) including any specific role as may be allocated, including emergency situations.
Qualifications
COSHH
Some knowledge of CAD [2-D], Revit/3-D draughting, Mapping
Some knowledge of Engineering Structures design
Knowledge of Engineering and similar Contract types [JCT, NEC, etc.] and other forms of specific Framework Contract types
Some working knowledge of CCTV/Surveillance
If interested in the role, please contact me at moeez.muhammed@servicecare.org.uk....Read more...
Position: Senior Façade Designer
Location: Dublin/Nationwide
Salary: Neg DOE
Responsibilities:
Design projects, from conception to delivery under supervision of senior Designer
Detail and design bespoke Façade layouts to client’s requirements
Use of logical and reyno-pro software in designing and costing of facades
Liaise with relevant departments in the company to ensure all designs are achievable and cost effective
Assist estimating in providing design solutions at enquiry stage.
Ensure good economical design, encouraging standardisation of details, to achieve best use of available resources.
Implement drawing procedures including A/B/C approval status.
Liaise with consultants.
Prepare fabrication drawings and cutting lists.
Prepare material schedules.
Represent the organisation's interests.
Provide advice on the management of projects and design implications.
Make sure the quality standards are met
Monitor sub-contractors to ensure details and accuracies are maintained
Collaborate with engineers, architects etc. to determine the specifications of the project
Obtain permits and licenses from appropriate authorities
Plan all construction Facade operations and schedule intermediate phases to ensure deadlines will be met with the project managers
Evaluate progress and prepare detailed reports
Requirements:
Architectural or Engineer degree an advantage but not essential
Proven experience as Facade Designer
In-depth understanding of construction procedures and material and project management principles
Good knowledge of MS Office, Cad and reynopro software
Familiarity with construction/ project management software
Outstanding communication and negotiation skills
Excellent organizational and time-management skills
A team player with leadership abilities
Analytical, numerical and Commercial awareness skills
Well-developed interpersonal skills
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship's already in place. Therefore, we are unable to consider candidates who do not have full authorisation to work in Ireland. Applications submitted without the necessary visa in place will not be considered.
If the position above is of interest to you and you would like to know more call Clodagh on 086 0405288 in complete confidence.
CS
....Read more...
Are you passionate about delving into the intricacies of Marine Vessels, particularly within the Naval and Commercial markets, focusing on military applications? Are you seeking an opportunity within a globally-reaching organization?Insignis Talent are seeking a Mechanical Design Engineer to join their client, on a permanent basis. This company offers competitive remuneration, a hybrid work model (3 days on-site, 2 days remote), and a genuine commitment to nurturing and advancing the professional growth of their engineers within the company.We are seeking an individual brimming with enthusiasm and resourcefulness, someone who takes great pride in their craft. In this role, you will become an integral part of a dynamic Design Engineering team, involved in crafting products and systems for both domestic and international markets.Key Responsibilities:
Collaborate on the design, technical specification, configuration, and support activities for externally manufactured products and systems.
Ensure timely delivery and accuracy of product documentation.
Furnish support data for products and systems.
Liaise with suppliers.
Engage in the calculation and analysis of shaft line equipment.
Support the design validation and initial testing of relevant products and systems.
Offer technical expertise in purchasing processes.
Maintain compliance with relevant data control standards.
Cultivate an in-depth knowledge base of product specifications, integration, and support.
Develop proficiency in internal tools, processes, and systems.
Desirable Qualifications and Skills:
Degree in Mechanical Engineering or equivalent.
Proven technical background in Mechanical Engineering, preferably in marine propulsion bearing design.
Proficiency in CAD (Solid Edge or similar software).
Familiarity with Office tools.
Proficient in engineering design, adept at creating GA and detailed drawings, and compiling parts lists.
Familiarity or experience with journal bearing design.
Competency in mechanical calculations, especially in bearing design and performance.
Familiarity or experience in shock calculations.
Bonus: Experience or knowledge of MathCAD, Matlab, etc.
Bonus: Understanding of composite bearing materials.
Candidates must be capable of attaining the requisite security clearance level for this position.If you are eager to contribute to cutting-edge projects, make a substantial impact in the realm of engineering and technology, and become an integral part of a forward-thinking organization, we encourage you to apply for this exciting opportunity!....Read more...
My clients in North Bucks have an immediate requirement for an NPI Engineer - Electronics.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities:As NPI Engineer you will provide an administration link between the engineering, product management and operational disciplines, with specific focus on all activities associated with New Product Introductions.This role reports to the Quality Assurance Manager and there may be an occasional requirement for national travel, primarily to meet suppliers and customers and support product deployment.Responsibilities include, although are not limited to the following:• Work alongside the Head of Quality to manage allocated projects through a structured gated process from concept/quotation to production-handover.• Analyse and recommend improvements to all production processes and methods to facilitate cost reduction and quality improvement.• Ensure compliance to all ECO procedures and work instructions.• Maintain process to communicate all engineering changes to internal and external stakeholders.• Support of production line tooling and equipment to support manufacturing processes.• Own creation of new part numbers, BOM creations/structure and BOM costings.• Preparation of Control documents/work instructions and provide technical support to production departments when necessary.• With help of Quality Engineers, perform FEMA, PFMEA study to understand the Production process and improve production time.• Generate and issue Component Inspection report, FAIR reports and manage PPAP process (if applicable).Relevant Skills & Competencies:Successful candidates should be able to demonstrate the following relevant skills and competencies:• A self-starter with good facilitation skills.• Strong interpersonal skills with the ability to communicate effectively at all levels of the organisation and with customers and suppliers.• Strong analytical and problem-solving skills.• Ability to understand and communicate technical data and specifications.• Able to work well under pressure and meet tight deadlines.Relevant Knowledge & Experience:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge and experience:Essential:• Degree qualified (or with equivalent experience) in an engineering discipline.• Strong, demonstrable background in Electronic Manufacturing.• Ability to manage project and coordinate project review meetings.• Interpretation of drawings (ASME and ISO) and GD&T, technical specifications, Gerber Files and product control documentation.• Excellent written and verbal communication skills, with fluency in written and spoken English.• Experience using 3D CAD software – SolidEdge preferred but others are acceptable too.• Good computer skills with competency in using MS Office suite and other software as necessary.Desirable:• Previous experience within Sensor manufacturing industry is an added advantage.• Experience working with projects in APQP/PPAP environment is preferred.• Use of PFMEA/DFMEA/Control plan tools and risk management techniques.• Awareness of measurement and calibration standards.• Competent user of Microsoft Office suite and Project.• Awareness / exposure to direct communication with OEM customers.Package:Salary to c£40k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.To apply for this NPI Engineer - Electronics role in North Bucks please contact us ASAP!....Read more...
My clients in North Bucks have an immediate requirement for an NPI Engineer - Electronics.This role is commutable from Milton Keynes, Newport Pagnell, St. Neots, Biggleswade, Sandy, Bedford.My clients are a world leader in in the design, manufacture and continuous improvement of wireless condition monitoring solutions. Their technology is used in 35 countries in rail, construction and mining. More than 30,000 sensors were installed last year, helping users manage ground and structural movement, landslide risk, geotechnical behaviour, rail track movement and much more.Main Duties & Responsibilities:As NPI Engineer you will provide an administration link between the engineering, product management and operational disciplines, with specific focus on all activities associated with New Product Introductions.This role reports to the Quality Assurance Manager and there may be an occasional requirement for national travel, primarily to meet suppliers and customers and support product deployment.Responsibilities include, although are not limited to the following:• Work alongside the Head of Quality to manage allocated projects through a structured gated process from concept/quotation to production-handover.• Analyse and recommend improvements to all production processes and methods to facilitate cost reduction and quality improvement.• Ensure compliance to all ECO procedures and work instructions.• Maintain process to communicate all engineering changes to internal and external stakeholders.• Support of production line tooling and equipment to support manufacturing processes.• Own creation of new part numbers, BOM creations/structure and BOM costings.• Preparation of Control documents/work instructions and provide technical support to production departments when necessary.• With help of Quality Engineers, perform FEMA, PFMEA study to understand the Production process and improve production time.• Generate and issue Component Inspection report, FAIR reports and manage PPAP process (if applicable).Relevant Skills & Competencies:Successful candidates should be able to demonstrate the following relevant skills and competencies:• A self-starter with good facilitation skills.• Strong interpersonal skills with the ability to communicate effectively at all levels of the organisation and with customers and suppliers.• Strong analytical and problem-solving skills.• Ability to understand and communicate technical data and specifications.• Able to work well under pressure and meet tight deadlines.Relevant Knowledge & Experience:Candidates should assess their suitability against the following essential and/or desirable relevant knowledge and experience:Essential:• Degree qualified (or with equivalent experience) in an engineering discipline.• Strong, demonstrable background in Electronic Manufacturing.• Ability to manage project and coordinate project review meetings.• Interpretation of drawings (ASME and ISO) and GD&T, technical specifications, Gerber Files and product control documentation.• Excellent written and verbal communication skills, with fluency in written and spoken English.• Experience using 3D CAD software – SolidEdge preferred but others are acceptable too.• Good computer skills with competency in using MS Office suite and other software as necessary.Desirable:• Previous experience within Sensor manufacturing industry is an added advantage.• Experience working with projects in APQP/PPAP environment is preferred.• Use of PFMEA/DFMEA/Control plan tools and risk management techniques.• Awareness of measurement and calibration standards.• Competent user of Microsoft Office suite and Project.• Awareness / exposure to direct communication with OEM customers.Package:Salary to c£40k, negotiable for a candidate with extremely well matched skills & experience.Workplace Pension Scheme with matched employer contributions.Life Assurance scheme.Cycle to Work Scheme.Tech Purchase Scheme.Learning & Development scheme including a variety of training courses.To apply for this NPI Engineer - Electronics role in North Bucks please contact us ASAP!....Read more...
JOB DESCRIPTION
Job Title:
NEW PRODUCT DESIGN ENGINEER & LEADER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer/Leader will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the \"thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 5 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
We’re looking for a talented CNC Turner Programmer Setter Operator (FANUC) with experience of machining components in exotic materials for a permanent role for our client in Skelmersdale / Wigan area. £32,000- £34,000 pa (dependent on experience and qualifications). The basic working week is 40 hours/week (Mon – Fri days – 8am – 4.30pm) plus possible O/T.
If that’s you then you could be exactly what they’re looking for.
The Role:
Based in Skelmersdale, as the CNC Turner Programmer Setter Operator you will be primarily responsible for programming and operating CNC machines.
In the CNC Turner Programmer Setter Operator role, you’ll be tasked with the following:
Use of steadies to machine components up to 4M long.
To ensure supplied product meets all customer requirements.
Documenting all Required Data and Reporting in correct manner.
Ensuring inspection equipment in a known state of calibration is used for checking customer product.
For ensuring that the unique part identity and status of products handled is maintained
For working safely and following company safety codes.
Must be time served (NVQ 3 or equivalent). Experience in a previous or similar position (3 years minimum)
Have a good understanding of ISO 9001/2015 quality systems.
Good planning and organisation skills along with good communications skills both with peers and management.
The standard working hours for this position are Monday to Friday 08:00 – 16:30 or shifts where deemed required.
The Candidate:
The ideal candidate for this CNC Turner Programmer Setter Operator role will have relevant experience of establishing tool requirements.
You’ll also need experience of reading, writing and understanding CNC programs in FANUC (essential).
Plus, it’s vital that you’ve got experience of generating programs offline using CAPT CAD Cam system or One CNC.
In addition, you’ll need the ability to read and understand drawings and the ability to use and read a range of measuring equipment to perform the CNC Turner Programmer Setter Operator role.
Does that sound like you? If so, we’d love to see your CV.
This position could be right for you if you want to work as any of the following: CNC Programmer, CNC Machinist or as a CNC Engineer or CNC Turner Programmer Setter Operator
The Package:
Basic salary: £32,000- £34,000 pa
Overtime: You’ll also have the opportunity to earn overtime in this role (1.33x for mid-week and Sat O/T & 1.5x for Sun O/T)
Benefits include:
Company doctor
Pension
23 days holiday plus bank holidays
Free coffee and tea
The Company:
The business you’ll be working in the CNC Turner Programmer Setter Operator role for is a company that has roots in precision machining and along with their industry leading highly skilled management team of thermal spray coatings experts they also provide a wealth of knowledge and experience in surface coating and finishing technologies.
The company works continuously to build a truly diverse and inclusive culture. They welcome and encourage candidates from all aspects of diversity to apply for this role.....Read more...
CNC TurnerAshton-under-LyneDay shift or nights availableMon-Thurs 08:00-16:30 Fri 08:00-13:00Mon-Thurs 18:00-06:00 Overtime available CNC TurnerBenefitsCompany pension with a total weekly contribution of 8% (5% employee, 3% employer), and we also have a bonus system based around Health and Safety that pays £250 every 6 months for those who have qualified.CNC TurnerThe RoleYou will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team and you are expected to contribute to improving any working processes. You will be on CNC Turner or CNC Vertical Borers.CNC TurnerMain Responsibilities
Programme, set up tools and load materials onto CNC machine.Programme Fanuc control systemsUse CAD/CAM and CimcoCarry out machining.To measure components produced on machines and use inspection equipment to ensure that components are manufactured to drawing dimensions and measurementsRead, interpret and work from engineering drawings.Contribute in a team working environment.Contribute to continuous improvementMaintain safe and clean working environment by complying with procedures, rules and regulations.Complete quality documentation.Use computer equipment for data purposes.Work to lean theory.Observe and practice the 5S principles.
CNC TurnerThe Candidate
Experience in CNC Turning or CNC Vetical BorerBe proficient at programming, set up, operation and adjustment of tool and fixture offsets on CNC machine toolsDesirable to be a time served engineer (or have an equivalent qualification) but experience is fine.
Please contact Amy Laplace-McHugh at Winsearch UK for further details – amy.mchugh@winsearch.ukWinsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManHKeywords : CNC Miller / CNC Turner / Vertical Boring / Horizontal Boring / Vertical borer / horizontal borer Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
CNC MillerAshton-under-LyneDay shift or nights availableMon-Thurs 08:00-16:30 Fri 08:00-13:00Mon-Thurs 18:00-06:00 Overtime available CNC MillerBenefitsCompany pension with a total weekly contribution of 8% (5% employee, 3% employer), and we also have a bonus system based around Health and Safety that pays £250 every 6 months for those who have qualified.CNC MillerThe RoleYou will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team and you are expected to contribute to improving any working processes. You will be on CNC Milling or CNC Horizontal Borers.CNC MillerMain Responsibilities
Programme, set up tools and load materials onto CNC machine.Programme Fanuc, Heidenhain control systemsUse CAD/CAM and CimcoCarry out machining.To measure components produced on machines and use inspection equipment to ensure that components are manufactured to drawing dimensions and measurementsRead, interpret and work from engineering drawings.Contribute in a team working environment.Contribute to continuous improvementMaintain safe and clean working environment by complying with procedures, rules and regulations.Complete quality documentation.Use computer equipment for data purposes.Work to lean theory.Observe and practice the 5S principles.
CNC MillerThe Candidate
Experience in CNC Milling or CNC Horizontal BorerBe proficient at programming, set up, operation and adjustment of tool and fixture offsets on CNC machine toolsDesirable to be a time served engineer (or have an equivalent qualification) but experience is fine.
Please contact Amy Laplace-McHugh at Winsearch UK for further details – amy.mchugh@winsearch.ukWinsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.ManHKeywords : CNC Miller / CNC Turner / Vertical Boring / Horizontal Boring / Vertical borer / horizontal borer Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
JOB DESCRIPTION
I&C engineer and supported by I&C technician team. Responsible for the design and review of all I&C equipment and instruments for the Plant. Explore solutions to production problems or improve efficiency with maintenance and operators. Run experiments and tests to aid in the development of improved manufacturing procedures and processes, and become familiar with a variety of concepts, practices, and procedures. Work and coordinate activities with the other engineering disciplines, Process, Project and Environmental. Prepare, review and/or approve of instrument specification data sheets and submit purchase requisitions for approval. Prepare equipment lists, instrument index, I/O lists. Review process flow diagrams and piping and instrument diagrams (P&IDs). Meet with plant technical staff to discuss technical information and features. Ensure drawings, specifications, reports, and analyses meet scope, schedule, cost, and quality requirements. Participate in failure mode and effect analysis (FMEA) and Process Hazard analysis (PHA) to consider equipment, personnel, and environmental safety. Knowledge of capital approval process and project justification required. Be involved in the design and development of equipment and work procedures. Be responsible for preparing, maintaining, and updating process hazard analysis. Ensures necessary records are maintained and prepared according to established guidelines. Takes responsibility for I&C Engineering Change Management system. Coordinate and approve all sample submissions of new products and engineering changes through the Product Development Program. Assists in identifying the root causes of a problem and instituting corrective action such as changes to batch sheets, generation of Engineering Change Requests, changes in workstations, changes to inspection analyses and changes to process procedures. Provide recommendations to improve procedures that apply to quality and operations functions. Be responsible for the design and implementation of policies and procedures to ensure that quality standards are met during production. Review quality trends based on quality data system information and interaction with production personnel and participate in the generation and implementation of defect-reduction programs. Investigate quality improvement opportunities and complaints with Director, Plant Manager and Research and Development. Prepare for and represent the company during all ISO and related audits. Review all design drawings and changes, process procedures, test procedures, procurement documents, and inspection analyses to ensure that the divisions and customers quality requirements are met on assigned products, programs, areas, and functions. Provide support to maintenance and operation group including visual aids and inspection analyses.
EDUCATION AND/OR EXPERIENCE:
B.S. degree in Electrical or Computer Engineering. Preferred, 2+ years working in a Manufacturing environment, and/or training; or equivalent combination of education and experience. Electrical Schematic and panel layout design using CAD (preferably AutoCAD Electrical) experience. Experience in the design of programmable logic controllers (PLC) or distributed control system (DCS) based controls systems. Expertise in National Electrical Code requirements in industrial facilities and hazardous locations. Proven understanding of integrating instrumentation with data acquisition hardware. Proficiency with electrical diagnostic equipment. Familiar with industrial sensors and actuators; pressure, temperature, accelerometers, motor controllers, flow meters, relays, strain gauges, valves, and pumps. Strong technical and non-technical writing and verbal skills Able to work in the United States without sponsorship. Ability to read, analyze, and interpret complex documents and/or scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
PHYSICAL DEMANDS
This job requires daily use of hands to finger, handle or feel, and daily talking and/or hearing. This job requires frequent walking, standing, sitting, reaching with hands and arms, and stooping, kneeling, crouching, or crawling. This job requires occasional climbing or balancing and tasking or smelling. This job requires frequent lifting of up to 10 lbs. This job has the following special vision requirements: Close vision (clear vision at 20 inches or less) Distance vision (clear vision at 20 feet or more) Color vision (ability to identify and distinguish colors) Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
WORK ENVIRONMENT
This job requires exposure to the following environmental conditions: Daily exposure to fumes or airborne particles and toxic or caustic chemicals. Frequent exposure to working near moving mechanical parts. Occasional exposure to wet or humid conditions, working in high, precarious places, outdoor weather conditions, and risk of electrical shock. The noise level for this job is loud. This job is located at a Chemical Plant. Evaluate hazardous processes and chemicals such as caustic, ammonia, and solvent. Evaluating storage tank instrumentation (high places), Assisting maintenance in troubleshooting, replacing, cleaning, and redesigning equipment
Wages: From $88K to $120K per year.
This position is 15% bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, 14 Paid Holidays, parental leave, 100% Education reimbursement, 401(k), employee stock purchase plan, and pension. Apply for this ad Online!....Read more...
