Report writing with the support of senior team members
Site visits and follow up reporting
Technical drawing
Attending meetings with clients
Supporting your team with information gathering for reports
Undertaking research to support report writing
Working with team members to improve your technical knowledge
Attending local office events to support your learning
Training:
Level 6 Civil Engineering Degree Apprenticeship
The University of Warwick
The training will be day release
Training Outcome:
If you are successful in being offered a permanent role with Jacobs at the end of the apprenticeship, you will be given the opportunity for further development and qualifications, depending on the business need and your capabilities and interests
Past apprentices have taken up civil engineering roles and have been given opportunities to work in different areas of the business, or at different locations across the UK if desired
Employer Description:At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Our business focuses on providing solutions to future challenges such as climate change, the need for renewable energy, low carbon economies, transportation, and material resource and waste management. While we shape some of the very largest and most challenging landmark projects in the UK, we also deliver local projects that protect communities.Working Hours :Monday to Friday, no weekend working. Hours to be confirmed/discussed, but core working hours are between 8.00am - 6.00pm.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Curiosity,Listening skills,Interest in tunnel engineering....Read more...
Report writing with the support of senior team members
Site visits and follow up reporting
Technical drawing
Attending meetings with clients
Supporting your team with information gathering for reports
Undertaking research to support report writing
Working with team members to improve your technical knowledge
Attending local office events to support your learning
Training:
Level 6 Civil Engineering Degree Apprenticeship
London South Bank University
The training will be day release
Training Outcome:If you are successful in being offered a permanent role with Jacobs at the end of the apprenticeship, you will be given the opportunity for further development and qualifications, depending on the business need and your capabilities and interests. Past apprentices have taken up civil engineering roles and have been given opportunities to work in different areas of the business, or at different locations across the UK if desired.Employer Description:At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Our business focuses on providing solutions to future challenges such as climate change, the need for renewable energy, low carbon economies, transportation, and material resource and waste management. While we shape some of the very largest and most challenging landmark projects in the UK, we also deliver local projects that protect communities.Working Hours :Monday to Friday, no weekend working.
Hours to be confirmed/discussed, but core working hours are between 8am–6pm.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Curiosity,Listening skills,Interest in water management....Read more...
Report writing with the support of senior team members
Site visits and follow up reporting
Technical drawing
Attending meetings with clients
Supporting your team with information gathering for reports
Undertaking research to support report writing
Working with team members to improve your technical knowledge
Attending local office events to support your learning
Training:
Level 6 Civil Engineering Degree Apprenticeship
The University of Salford
The training will be day release
Training Outcome:
If you are successful in being offered a permanent role with Jacobs at the end of the apprenticeship, you will be given the opportunity for further development and qualifications, depending on the business need and your capabilities and interests
Past apprentices have taken up civil engineering roles and have been given opportunities to work in different areas of the business, or at different locations across the UK if desired
Employer Description:At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Our business focuses on providing solutions to future challenges such as climate change, the need for renewable energy, low carbon economies, transportation, and material resource and waste management. While we shape some of the very largest and most challenging landmark projects in the UK, we also deliver local projects that protect communities.Working Hours :Monday to Friday, no weekend working.
Hours to be confirmed/discussed, but core working hours are between 8.00am - 6.00pm.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working,Initiative,Curiosity,Listening skills,Interest in water management....Read more...
Report writing with the support of senior team members
Site visits and follow up reporting
Technical drawing
Attending meetings with clients
Supporting your team with information gathering for reports
Undertaking research to support report writing
Working with team members to improve your technical knowledge
Attending local office events to support your learning
Training:
Level 6 Civil Engineering Degree Apprenticeship
The University of Wolverhampton
The training will be day release
Training Outcome:If you are successful in being offered a permanent role with Jacobs at the end of the apprenticeship, you will be given the opportunity for further development and qualifications, depending on the business need and your capabilities and interests. Past apprentices have taken up civil engineering roles and have been given opportunities to work in different areas of the business, or at different locations across the UK if desired.Employer Description:At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Our business focuses on providing solutions to future challenges such as climate change, the need for renewable energy, low carbon economies, transportation, and material resource and waste management. While we shape some of the very largest and most challenging landmark projects in the UK, we also deliver local projects that protect communities.Working Hours :Monday to Friday, no weekend working. Hours to be confirmed/discussed, but core working hours are between 8am–6pm.Skills: Communication skills,Organisation skills,Problem solving skills,Team working,Initiative,Curiosity,Listening skills,Interest in highways....Read more...
Report writing with the support of senior team members
Site visits and follow-up reporting
Technical drawing
Attending meetings with clients
Supporting your team with information gathering for reports
Undertaking research to support report writing
Working with team members to improve your technical knowledge
Attending local office events to support your learning
Training:
Level 6 Civil Engineering Degree Apprenticeship
The University of Salford
The training will be via day-release
Training Outcome:If you are successful in being offered a permanent role with Jacobs at the end of the apprenticeship, you will be given the opportunity for further development and qualifications, depending on the business needs and your capabilities and interests. Past apprentices have taken up civil engineering roles and have been given opportunities to work in different areas of the business, or at different locations across the UK if desired.Employer Description:At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Our business focuses on providing solutions to future challenges such as climate change, the need for renewable energy, low carbon economies, transportation, and material resource and waste management. While we shape some of the very largest and most challenging landmark projects in the UK, we also deliver local projects that protect communities.Working Hours :Monday to Friday, no weekend working. Hours to be confirmed/discussed, but core working hours are between 8am–6pm.Skills: Communication skills,Organisation skills,Problem solving skills,Team working,Initiative,Curiosity,Listening skills,Interest in highways....Read more...
Report writing with the support of senior team members
Site visits and follow up reporting
Technical drawing
Attending meetings with clients
Supporting your team with information gathering for reports
Undertaking research to support report writing
Working with team members to improve your technical knowledge
Attending local office events to support your learning
Training:
Level 6 Civil Engineering Degree Apprenticeship
The University of Salford
The training will be day release
Training Outcome:If you are successful in being offered a permanent role with Jacobs at the end of the apprenticeship, you will be given the opportunity for further development and qualifications, depending on the business need and your capabilities and interests. Past apprentices have taken up civil engineering roles and have been given opportunities to work in different areas of the business, or at different locations across the UK if desired.Employer Description:At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good. Our business focuses on providing solutions to future challenges such as climate change, the need for renewable energy, low carbon economies, transportation, and material resource and waste management. While we shape some of the very largest and most challenging landmark projects in the UK, we also deliver local projects that protect communities.Working Hours :Monday to Friday, no weekend working. Hours to be confirmed/discussed, but core working hours are between 8.00am - 6.00pm.Skills: Communication skills,Organisation skills,Problem solving skills,Team working,Initiative,Curiosity,Listening skills,Interest in highways....Read more...
JOB DESCRIPTION
Essential Functions:
Direct responsibility for Profit and Loss of Stonhard business within the Region. Compiles reports for the Director of Sales and the Regional General Manager evaluating TM-Linings' performance. Is responsible for invoice forecasting and monitors and reports on installation performance and follow-up with customers. Trains, monitors, and motivate the Territory Managers, Architectural Design & Engineering Reps, and Area Managers to promote and sell the Stonhard product line and services. Responsible for the management of the Stonhard installation crews up to and including interviewing, training and profit and loss. Assist on ADE calls involving Architects/Engineers dealing with linings related projects.
Minimum Requirements:
Five (5) or more years of successful sales management experience; sector-specific sales experience preferred. Spends a minimum of three (3) days/week in the field with Stonhard customers and Stonhard Territory Managers. Valid Driver's License
Physical Requirements:
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk and reach with hands and arms. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Must be able to physically transport samples case and literature to customers (approximately 40 pounds in weight). Must possess reliable transportation (driving time in a typical day may be up to 30%). This position requires wearing a hard hat, safety glasses, gloves, steel-toed boots, high-visibility vest, and depending on the task, may also require ear protection, respirators, safety harnesses, and specialized protective clothing, while on the worksite.
Preferred Requirements:
Bachelor's degree in engineering, business management, or related field is preferred. Apply for this ad Online!....Read more...
Business Development Manager – Fans/Motors (Home-Based), UK)
Are you an experienced Business Development Manager with a background in Fans, Motors, or Drives, looking for a home-based role covering the UK?
Our client, a globally recognised leader in Human Machine Interface (HMI) components and solutions, is expanding their UK team. With headquarters in the UK, they support a wide network of direct clients across the UK and Northern Europe, along with specialist distribution partners throughout Europe.
This is an exciting opportunity to join a high-performing, innovative business at the forefront of its industry.
About the Role
As the Business Development Manager – Fans/Motors, you will be responsible for driving sales growth within the transport, automotive, and machinery sectors. You will manage existing customer relationships and proactively identify and secure new business opportunities. This is a home-based role, but regular travel to customer sites across the UK will be required.
Key Responsibilities
Develop and execute sales strategies to grow market share in the fans, motors, drives, and automation sectors.
Build strong relationships with existing clients, ensuring long-term account retention and satisfaction.
Identify and pursue new business opportunities within the transport, automotive, and industrial machinery markets.
Work closely with customers on design-led solutions, offering technical insight and product expertise.
Deliver against targets and KPIs, while reporting progress to senior management.
Requirements
Proven experience in a business development or technical sales role, ideally in motors, stepper motors, drives, or servo systems.
A successful track record of selling into industries such as transportation, automotive, or heavy-duty machinery.
Strong strategic planning and sales development skills with a results-driven approach.
This is a fantastic home-based opportunity for a Business Development Manager - Fans/Motors Market to join an established, growing company. If this position is the one for you, call Ben on 01582 878816 / 07471 181784 or send your CV to bwiles@RedlineGroup.Com....Read more...
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project. Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns. Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman. Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e. OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project. Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns. Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman. Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e. OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online!....Read more...
Job Title: Electrical Technician
Location: Saffron Walden
Annual Salary: £38,000 - £43,000
A globally leading oil & gas business who specialise in the transportation and storage of bulk chemicals and fuel are looking for an experienced Electrical Technician to join one of their sites in Saffron Walden, in the Uttlesford area!
Annual Salary and Benefits
Annual Salary Between £38,000 - £43,000 (DOE)
Company Van + Fuel Card
Days Based Role: Monday – Friday
Overtime Available at 1.5 X Hourly Rate
25 Days Annual Leave + 8 Bank Holidays
Private Medical Insurance
Company Pension Scheme (Up to 9% Employer Contribution)
Life Assurance Policy & Other Wellbeing Benefits
Role of the Electrical Technician
As the Electrical Technician, you will be responsible for carrying out Electrical Maintenance and testing on various industrial pipeline systems. This includes both planned and preventative maintenance. You will work as part of a team of technicians in the engineering department, reporting into the Regional Maintenance Manager.
Key Responsibilities of the Electrical Technician:
Working alongside technicians and engineers to provide resolution of electrical defects, including changes in the operation of specific plant items and information in response to maintenance alerts.
To carry out regular maintenance of LV distribution small power and lighting.
Accountable for updating Computer Maintenance Management Systems (CMMS).
Completing emergency lighting and fire alarm testing and Electrical periodic inspection and testing to BS 7671 and BS 60079 standards.
Testing in hazardous areas and testing work in accordance with procedures.
Qualifications and Skills Necessary
Formal Electrical Qualifications (E.G. City & Guilds, NVQ Etc.), Including 18th Edition Electrical Qualification
Process Manufacturing & Industrial Sector Experience
Strong Background In Reactive And Planned Maintenance
Experience Of Working On Computer Maintenance Management Systems (CMMS)
COMPEX Qualification Is Desired
COMAH Experience Is Desired
How to Apply: To apply for the role of Electrical Technician, please submit your CV for review.
....Read more...
JOB DESCRIPTION
We are seeking individuals with experience in general construction, commercial roofing, building envelope, and general labor to join our team.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Masonry & Tuckpointing Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrate safe work practices. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Experience in general construction, commercial roofing, and/or building envelope a plus! The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc. Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired. Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs. Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online!....Read more...
JOB DESCRIPTION
We are seeking individuals with experience in general construction, commercial roofing, building envelope, and general labor to join our team.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Masonry & Tuckpointing Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrate safe work practices. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Experience in general construction, commercial roofing, and/or building envelope a plus! The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc. Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired. Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs. Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online!....Read more...
JOB DESCRIPTION
We are seeking individuals with experience in general construction, commercial roofing, building envelope, and general labor to join our team.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Masonry & Tuckpointing Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrate safe work practices. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Experience in general construction, commercial roofing, and/or building envelope a plus! The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc. Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired. Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs. Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online!....Read more...
JOB DESCRIPTION
We are seeking individuals with experience in general construction, commercial roofing, building envelope, and general labor to join our team.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Masonry & Tuckpointing Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrate safe work practices. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Experience in general construction, commercial roofing, and/or building envelope a plus! The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada, Inc. Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired. Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs. Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online!....Read more...
Flexible scheduling options available for both full-time and part-time positionsPurpose-built practice with a well-established teamDiscover one of the most iconic cities in the world Where you’ll be working You will be working at a specialist private practice committed to excellence in developmental paediatrics, integrating assessment and therapy for children and adolescents with developmental, learning, and behavioural difficulties in one multidisciplinary centre. This practice provides comprehensive specialist services in all areas of paediatric psychiatry, including ADHD, Autism Spectrum disorders, anxiety disorders, motor development, sleep disorders, and emotional disorders. As a Consultant Child & Adolescent Psychiatrist, you will conduct individual assessments, referrals, and team assessments for developmental paediatric concerns. You will work alongside, and collaborate with, experienced professionals including paediatricians, adolescent physicians, psychiatrists, clinical neuropsychologists, speech pathologists, and art therapists. You will have the opportunity to develop and extend your clinical practice in a friendly clinical setting, supported by a dedicated General Manager, Practice Manager, and administration support team. Where you’ll be living You will be living in the iconic capital city of New South Wales. World famous as a tourist hotspot, this harbourside city offers a fast-paced lifestyle against a serene and natural backdrop. All amenities are very easily accessible, with an efficient transportation network, extensive cultural and recreational facilities, renowned national landmarks and endless options for exploring the arts, dining, nightlife, and entertainment. Consistently ranked as one of the most liveable cities in the world, residents and tourists alike are drawn to the city’s vast array of waterfront views and the unique, laid-back Aussie lifestyle. At your doorstep are the Sydney Opera House, the Harbour Bridge, the Royal Botanical Gardens, Darling Harbour, and Australia's most famous, world-class beaches. Salary information Consultant Psychiatrists can expect a competitive remuneration package, with high income potential and excellent benefits and incentives. Requirements Fellowship of the Royal Australian and New Zealand College of Psychiatrists (FRANZCP) About us Elective Recruitment is a person-centred recruitment consultancy. Your career progression is just as important to us as your well-being and work-life balance. We are not just another recruitment company; we do things our way and we consult. We have a very clear vision: create great careers, better lifestyles, and add value - and we won’t stop until this is achieved. For access to Consultant Psychiatrist jobs in NSW join our network today. For a confidential discussion contact the Elective Recruitment Team at +61 2 9137 4300, or apply now!....Read more...
Test the quality of products to make sure that they meet standards and specifications
Set up and maintain laboratory instruments and equipment
Conduct and support scientific investigations and experiments
Prepare chemical solutions, lab size batches of current or new formulations
Record, compile, and interpret results of chemical and physical experiments, tests, and analyses for a variety of purposes
Order and maintaining stock and resource
Training:
Over 18 months, you’ll devote a minimum of 6 hours of your working week on ‘off the job’ training. This can include theory training (for example, virtual lessons & online learning), alongside practical training (for example shadowing, mentoring, & time spent writing assignments. Together this will count towards a Level 3 Laboratory Technician apprenticeship
You’ll be trained by an expert tutor from Tiro as well as an experienced mentor at Notedome who together, will make sure you develop the knowledge, skills, and work habits you’ll need to succeed in your career
Training Outcome:
When you join Notedome, the possibilities for your success are limitless. As a successful applicant, you have the potential to secure a full-time position within the company at the conclusion of your apprenticeshipThrough practical training on the job, you will acquire new skills and gain the competence and responsibility required for laboratory testing
This apprenticeship program serves as a stepping stone towards a rewarding career in laboratory testing, with the added opportunity for the apprentice to become a registered Science technician (RSci Tech)
This program unlocks a multitude of career paths, granting you access to diverse organisations across various sectors. Whether it's the chemical and pharmaceutical industries (primary and secondary), biotechnology companies, nuclear enterprises, analytical science services, or educational institutions, the doors are wide open
This apprenticeship can also help pave the way for further educational and professional advancement
You may choose to pursue higher-level qualifications through one of our Degree Apprenticeships such as Bachelor of Science (BSc) in Applied Materials Science or Applied Chemical Science
Employer Description:For over 45 years, Notedome has been an industry-leading polyurethane system house catering to specialised elastomer needs of global customers.
We optimise formulations to help customers realise their product aspirations for a better tomorrow. A tomorrow where aerospace and transportation are more fuel-efficient. Where agricultural equipment operates seamlessly without downtime. Where industrial machinery resiliently withstands high temperatures and demonstrates strength against wear and tear.Working Hours :Workings hours are 7.00am to 3.30pm. Full shifts to be confirmed.Skills: Attention to detail,Organisation skills,Problem solving skills,Logical,Initiative....Read more...
At Leda Homecare Ltd, we know that different people need different types of care and different levels of care. We therefore offer a range of products which can be discussed and adapted to suit every client. We ensure that all our clients are the decision makers and we work with them to make their day to day task as easy as possible.
Duties will include:
Assisting with personal hygiene, dressing, and grooming
Supporting mobility and transportation needs
Providing companionship and emotional support
Helping with meal preparation and light household duties
Learning to administer medication safely
Recording care activities and reporting changes in client condition
Skills we look for:
Communication Skills - Able to listen actively and speak clearly with clients, families, and colleagues
Teamwork - Works well with others to provide consistent, high-quality care
Time Management - Organises tasks efficiently to meet clients' needs
Problem-Solving - Responds calmly and thoughtfully to unexpected situations
Basic Cooking & Housekeeping - Prepares simple meals and helps maintain a clean, safe environment
Record-Keeping - Accurately documents care activities and observations
Basic IT Skills - Comfortable using digital tools for training or logging care notes
Respectful - Treats clients with dignity and honours their choices
Reliable - Shows up on time and follows through on responsibilities
Positive Attitude - Brings encouragement and optimism to clients' lives
Discreet - Maintains confidentiality and respects privacy
Adaptable - Can adjust to different clients' needs and changing situations
Your work week:
Role is community based so travelling between clients is essential in all weathers.
Weekends are included in rota
Hours can sometimes be long with time off during the day
At Leda Health care, you will be working towards an Adult Care Worker Level 2 Apprenticeship over the course of 15 months.Training:Adult Care Worker Apprenticeship Level 2, including Functional Skills in Maths and English.Training Outcome:
Opportunity for permanent employment upon completion
Progression to advanced roles or further qualifications in Health and Social Care
Mentor / Buddy
Team Leader
Care Coordinator
Registered Manager
Employer Description:Leda Homecare Ltd is registered with the Care Quality Commission (CQC), to provide domiciliary care services for people in the comfort of their own homes. We also provide one to one support for people and their families, who are unable to gain respite care.Working Hours :30 hours per week, on a shift pattern basis including bank holidays, weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills' development, you’ll work towards your professional qualification. From day one you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on the job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies
Training:
Digital Support Techncian Level 3 Apprenticeship Standard
Training Outcome:
Opportunities to continue learning and development through routes such as the Digital Technology Solutions Level 6 Standard
Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings). Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills' development, you’ll work towards your professional qualification. From day one you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on the job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies
Training:
Digital Support Techncian Level 3 Apprenticeship Standard
Training Outcome:
Opportunities to continue learning and development through routes such as the Digital Technology Solutions Level 6 Standard
Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings). Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills' development, you’ll work towards your professional qualification. From day one you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on the job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies
Training:
Digital Support Techncian Level 3 Apprenticeship Standard
Training Outcome:
Opportunities to continue learning and development through routes such as the Digital Technology Solutions Level 6 Standard
Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings)
Shifts to be confirmedSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills' development, you’ll work towards your professional qualification. From day one, you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on the job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies.
Training:
Digital Support Techncian Level 3 Apprenticeship Standard
Training Outcome:
Opportunities to continue learning and development through routes such as the Digital Technology Solutions Level 6 Standard.
Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings). Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills development, you’ll work towards your professional qualification. From day one, you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on-the-job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies
Training:Nuclear Scientist and Nuclear Engineer (degree) Level 6 Apprenticeship Standard.Training Outcome:On completion of the apprenticeship, the nuclear scientist and nuclear engineer will hold a Bachelor's (Honours) degree qualification (at level 6), accredited by the constituent bodies of the Engineering or Science Council.Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings). Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills development, you’ll work towards your professional qualification. From day one, you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on-the-job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies
Training:Nuclear Scientist and Nuclear Engineer (degree) Level 6 Apprenticeship Standard.Training Outcome:On completion of the apprenticeship, the nuclear scientist and nuclear engineer will hold a Bachelor's (Honours) degree qualification (at level 6), accredited by the constituent bodies of the Engineering or Science Council.Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings). Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Our apprenticeships are designed to give you an insight into a wide variety of areas of work and the chance to explore where your skills and interests lie. Through a combination of on-the-job learning and practical skills development, you’ll work towards your professional qualification. From day one you’ll work on real projects that offer scale and variety, collaborating with others and creating a meaningful impact on the world around us.
You’ll be supported by our leaders, technical specialists, your own dedicated mentor and our continuous learning and development framework. Not only will you gain valuable 'on the job' experience and work towards professional qualifications, but you'll also earn a meaningful salary from day one. We’re proud to pay the Real Living Wage for our Level 6 Apprenticeships.
Here’s what your role as an apprentice will involve:
Developing your skills in a wide range of exciting projects
Learning and using relevant design software and technology
Being involved in client meetings and assisting in building key client relationships
You’ll get to understand and learn digital skills, to help us harness technology in new ways
Your mentors will support you as you study towards nationally recognised qualifications and accreditation
You’ll have dedicated time to spend at college or university to focus on your studies.
Training:
Project Controls Technician, Level 3
Training Outcome:
With additional training the Project Controls Technician could also progress to more specialist roles in areas such as project controls, planning, scheduling, estimating, cost control, risk and quality and ultimately a role as project controls manager or director
Employer Description:We are AtkinsRéalis, a world-class engineering services and nuclear organization. When you join us, you’ll be helping to create sustainable solutions that connect people, data and technology to transform the world’s infrastructure and energy systems.
Our global team of 36,000+ employees speak over 70 languages and represents 130 nationalities across six continents. Our work covers a variety of sectors, including transportation, infrastructure, environment, water, energy, defence, technology, and aerospace.
Through our apprenticeship programme, you’ll experience outstanding training and support for every step in your career. Put your hand up for opportunities that interest you and be inspired by managers who want to see you succeed. Reaching your full potential means being able to bring your whole self to work and feeling like you belong. Find out more about our global programme Different makes a difference.Working Hours :Monday to Friday (flexible timings). Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
