Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
The primary responsibility of the role is to support the Hot Fire Test teams across all engine test cells. This involves site maintenance, upkeep, and preparation activities before and after hot fire testing, as well as set-down activities post-test.
Key Responsibilities
Perform site maintenance and assist in site set-up and take-down activities related to testing.
Maintain and manage Ground Support Equipment (GSE), ensuring it meets operational requirements.
Test and verify broadband seismic instruments, including surface and borehole setups.
Engage with database management for equipment tracking and test documentation.
Handle and operate vacuum and pressure systems as needed.
Conduct tests on electrical motors and oversee the function testing of all engines.
Prepare and produce detailed test procedures for use by the test team during operations.
Requirements
Experience working in the space industry, with a strong understanding of relevant technologies and standards.
Proficiency in database management for tracking and documentation purposes.
Familiarity with vacuum and pressure systems.
Hands-on experience in testing electrical motors and conducting function tests on engines.
Demonstrated ability to prepare comprehensive test procedures.....Read more...
The primary responsibility of the role is to support the Hot Fire Test teams across all engine test cells. This involves site maintenance, upkeep, and preparation activities before and after hot fire testing, as well as set-down activities post-test.
Key Responsibilities
Perform site maintenance and assist in site set-up and take-down activities related to testing.
Maintain and manage Ground Support Equipment (GSE), ensuring it meets operational requirements.
Test and verify broadband seismic instruments, including surface and borehole setups.
Engage with database management for equipment tracking and test documentation.
Handle and operate vacuum and pressure systems as needed.
Conduct tests on electrical motors and oversee the function testing of all engines.
Prepare and produce detailed test procedures for use by the test team during operations.
Requirements
Experience working in the space industry, with a strong understanding of relevant technologies and standards.
Proficiency in database management for tracking and documentation purposes.
Familiarity with vacuum and pressure systems.
Hands-on experience in testing electrical motors and conducting function tests on engines.
Demonstrated ability to prepare comprehensive test procedures.....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
UPS/Inverter Test Engineer
Location: Clevedon, Somerset
Our client is seeking a skilled and detail-oriented UPS/Inverter Test Engineer to join their growing team. This pivotal role will focus on the testing, inspection, and fault diagnosis of UPS systems, inverters, battery tripping units, and related power equipment. You will ensure that all equipment meets rigorous quality standards and customer specifications, contributing directly to product performance and reliability.
Key Responsibilities for the UPS/Inverter Test Engineer job based in Clevedon, Somerset:
Testing and inspecting Battery Tripping Units, Inverters, and UPS Systems.
Performing capacity testing on batteries and FATs (Factory Acceptance Tests) to customer specifications.
Testing both manufactured and bought-in equipment to agreed internal standards.
Conducting fault finding down to component level on both through-hole and surface mount PCBs.
Maintaining and calibrating test equipment in line with company and industry standards.
Evaluating both new and existing equipment to ensure performance and compliance.
Supporting the development and documentation of testing standards and procedures.
Participating in cross-functional troubleshooting and contributing to root cause analysis and resolution.
Providing detailed feedback to Design and Engineering teams, participating in design review meetings.
Ensuring high quality standards are met and all relevant documentation is maintained.
Qualifications and Experience Required for this UPS/Inverter Test Engineer job based in Clevedon, Somerset:
Proven experience in testing UPS systems, inverters, or similar power electronic equipment.
Strong fault-finding skills, including down to component level on PCBs.
Experience in conducting FATs and capacity testing on batteries is highly desirable.
Familiarity with using test equipment such as oscilloscopes, multimeters, load banks, and signal generators.
Understanding of industry standards and quality control processes.
A qualification in Electrical or Electronic Engineering is preferred.
Excellent problem-solving and communication skills with a proactive attitude.
This is an exciting opportunity to join an established and innovative company at the forefront of power electronics and system reliability.
If you have the skills and experience and are ready to take the next step in your career, we’d love to hear from you!
Please send your CV to NDrain@redlinegroup.Com or call 07487 756328 to speak with Nick for more information.....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
A Senior Electronics Test Engineer is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and optimisation of advanced electronic modules for the global test and measurement industry.
The Senior Electronics Test Engineer, Essex, will take ownership of complex testing projects, applying strong analogue and digital expertise to resolve technical issues, support product development, and ensure the highest engineering standards. You will also play a key role in developing automated test systems and mentoring junior colleagues.
Responsibilities include:
Perform in-depth testing of new and existing electronic modules to the highest standards.
Lead complex projects in collaboration with international colleagues.
Resolve advanced electronic test issues using technical knowledge and initiative.
Develop C++ software applications for engineering and production test systems.
Provide coaching, support, and technical guidance to engineers and technicians.
The Senior Electronics Test Engineer, Essex, will have the following key skills:
Bachelor’s or Master’s degree in Electronic or Electrical Engineering.
Proven experience in electronics testing (analogue and digital).
Strong circuit design, signal processing, and fault-finding skills.
Proficiency in C++ (or similar) for automated test systems.
Experience with oscilloscopes, digital multimeters, signal generators, and logic analysers.
APPLY NOW – Senior Electronics Test Engineer job in Essex could be of interest, send your CV to adighton@redlinegroup.com Or call Adam on 01582 878821 / 07961158768....Read more...
Our client is software development and hardware engineering company. They are growing fast and need someone to help them continue to manage the delivery of high quality work in a fast-paced environment.
Key requirements
Work together with image sensor engineers, electrical engineers, etc. on building and testing prototypes.
Work on testing firmware for customized image sensors.
Develop firmware to integrate customized image sensors into prototyping systems.
Testing the developed firmware with the hardware.
Support debugging issues reported by users of the prototypes.
Skills
Experience of firmware development in C on C++.
Experience developing firmware to control image sensors or cameras.
Familiar with hardware testing equipment including oscilloscope, function generator, power supply etc.
Proficient in test management tools, TestRail preferred and in defect management tool ideally Jira.
Possess strong knowledge of Agile testing methodologies and best practices.
....Read more...
Our client is software development and hardware engineering company. They are growing fast and need someone to help them continue to manage the delivery of high quality work in a fast-paced environment.
Key requirements
Work together with image sensor engineers, electrical engineers, etc. on building and testing prototypes.
Work on testing firmware for customized image sensors.
Develop firmware to integrate customized image sensors into prototyping systems.
Testing the developed firmware with the hardware.
Support debugging issues reported by users of the prototypes.
Skills
Experience of firmware development in C on C++.
Experience developing firmware to control image sensors or cameras.
Familiar with hardware testing equipment including oscilloscope, function generator, power supply etc.
Proficient in test management tools, TestRail preferred and in defect management tool ideally Jira.
Possess strong knowledge of Agile testing methodologies and best practices.
....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
ElectricianCroydon £35,000 - £45,000 Basic + Overtime (OTE £45,000+) + Door to Door + Company Van + Stability + 28 Days Holiday + Pension + Immediate Start
Are you an experienced Electrician with a background in street lighting or external lighting? Do you want to join a well-established, family-run company where your skills will be valued, and your career can grow? If so, this is a fantastic opportunity to join a leading provider of electrical and fire safety services across London and the Southeast.
This is a varied, field-based role working on street lighting, feeder pillars, bollards, and external lighting systems across social housing and local authority sites. You’ll enjoy job security, a supportive team culture, and opportunities to develop further skills in testing, inspection, and specialist electrical systems.
Your Job As An Electrician Will Include:
* Installation, servicing, and maintenance of external and street lighting systems * Diagnosing and repairing faults with lighting columns, bollards, and feeder pillars * Groundworks including trenching, ducting, and fault-finding using CAT/Genny * Routine inspections, PAT testing, and ensuring compliance with BS7671 standards * Completing job reports and certifications via mobile systems
As An Electrician You Will Have:
* City & Guilds Level 3 Electrotechnical Qualification (essential) * Strong knowledge of street lighting installation and maintenance * 2391 (preferred), GS39, IPAF, NRSWA or HEA qualifications desirable * Good understanding of electrical safety standards and regulations * Based in London or the Southeast with a full UK driving licence
Apply now or call Billy on 07458163030 for immediate consideration!Keywords: External Lighting Engineer, Street Lighting Engineer, Electrical Engineer, Street Lighting Installation, Street Lighting Maintenance, Feeder Pillar Engineer, Lighting Columns, External Lighting Systems, Electrical Testing, BS7671, 18th Edition, 2391 Inspection and Testing, GS39, NRSWA, IPAF, HEA Qualified, Electrical Service Engineer, Field Service Engineer, Street Lighting Technician, London, South East, Social Housing Electrical Engineer, Local Authority Electrical Engineer, Croydon, Bromley, Sutton, Mitcham, Purley, Caterham, Coulsdon.This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
Test Engineer Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham. Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply!....Read more...
Enthusiastic apprentice gaining hands-on experience in industrial electrical installation, maintenance, and testing.
Developing practical skills in containment systems.
Cabling.
Control circuits.
Fault finding.
Building knowledge of electrical design and inspection to BS7671 standards.
Committed to learning, safety, and high-quality workmanship with a strong interest in progressing toward a fully qualified industrial electrician role.
Training:Once a month day release to Gateshead College.Training Outcome:
Opportunity to progress from apprenticeship/trainee level to a fully qualified industrial/installation electrician.
Development into specialist areas such as electrical design, control systems, automation, or inspection & testing.
Potential to gain industry-recognised qualifications (NVQ Level 3, AM2, 18th Edition, CompEx, etc.).
Long-term career growth into supervisory, project management, or engineering roles.
Continuous professional development through structured training and on-the-job experience.
Employer Description:Active Electrical Services (N.E.) Ltd is an electrical contracting company operating in the industrial and commercial sectors. Their services include:
• Industrial Electrical Projects: Main electrical intakes up to 5 MVA, turnkey factory installations, installation of automated production lines and large machines.
• Distribution Systems: Installation of distribution busbars, “tap-off” busbars up to 5000A.
• Design Work: Electrical installation design.
• Controls & Automation: Control panel build (CE marked), process automation, BMS electrical installations, energy monitoring systems.
• Test & Inspection: Electrical testing and inspection work in accordance with relevant standards.
Strengths / Key Features
• Offers a broad range of industrial electrical capability — from control/automation to large power distribution systems.
• Experienced in both design & installation, which helps with providing turnkey solutions.
• Attention to quality, documentation, and future expandability are emphasised.
• Operates mainly in the North East but “nationwide in many disciplines” within electrical contractingWorking Hours :Working week: 40.
Monday to Friday 8.00 to 4.30pm with 30mins for lunch.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Driving License,Hand skills....Read more...
An innovative and dynamic manufacturing company is looking for Senior Hardware Test Engineer. The company develops and manufactures green energy solutions for global clients. You will be responsible for early testing and validation of the components using HIL(Hardware in the Loop) technology. You will also be responsible for documentation of test environment and regression testing.
Candidate requirements
Experience in HIL and Labcar test systems.
Experience working with CANanlyser or other CAN based toolsets.
Experience working on Matlab or Simulink.....Read more...
An innovative and dynamic manufacturing company is looking for Senior Hardware Test Engineer. The company develops and manufactures green energy solutions for global clients. You will be responsible for early testing and validation of the components using HIL(Hardware in the Loop) technology. You will also be responsible for documentation of test environment and regression testing.
Candidate requirements
Experience in HIL and Labcar test systems.
Experience working with CANanlyser or other CAN based toolsets.
Experience working on Matlab or Simulink.....Read more...
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools. You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards. ....Read more...
Our client is an international engineering and manufacturing business who have a long-established reputation for designing, manufacturing, installing, commissioning and servicing airflow/ air conditioning related processes for blue chip clients all across the globe.
The service engineer offers fantastic opportunities for both personal and career progression.
Due to continued growth, we are seeking an electrical service engineer to join the service team, you will undertake the international service, maintenance and repairs of their specialist machinery.
Working as part of the aftermarket service team, you will be responsible for the air flow testing of systems, including filters integrity of air flow/ air balancing of systems.
Key Responsibilities of the Service Engineer:
Carry out annual on-site servicing of containment and filtration systems, including Airflow, DOP (HEPA integrity), and particle testing, Calibration of pressure and velocity devices, Electrical fault finding and diagnostics
Maintain and calibrate test equipment with up-to-date certification.
Work within planned schedules and client shutdown periods.
Follow standard procedures and complete service reports, IQ/OQ documentation.
Report sales leads and promote spares, upgrades, and service opportunities.
Support additional site activities such as relocations and system upgrades.
Working Hours of the Service Engineer
Basic hours are 38.75, overtime is paid at 150%
Minimum Experience/ Qualifications Required
Level 3 engineering qualification in electrical or mechanical engineering.
Experience of air flow testing and filtration systems.
Flexible and happy to travel internationally and work away from home.
Full UK Driving License and Valid Passport
In Return, The Service Engineer will Receive,
Basic Salary: Up to £50,000 Per Annum (Dependent upon Experience)
Overtime paid at 150%.
Flexible working hours.
Food and travel allowance.
....Read more...
