Are you an RF Engineer ready to step up into a more senior, impactful role? Were looking for a talented engineer with hands-on RF experience to help develop the next generation of Electronic Counter Measure (ECM) systems.
This is a fantastic opportunity to work on cutting-edge defence technology with a growing team at the forefront of RF and Electronic Warfare innovation.
As an RF Hardware Engineer, youll join an expert engineering team focused on designing and verifying high-performance RF sub-systems, including transceivers and power amplifiers from DC to 12GHz. Youll be involved in the full lifecycle, from simulation and design to implementation and integration.
Key Responsibilities:
- Design and verification of complex RF and analogue sub-systems
- Simulation and implementation of broadband power amplifiers and T/R switches
- Collaborate with software, firmware, PCB, and mechanical engineers
- Work with SPICE, EM simulators, and Mentor Graphics tools
- Support integration and test using RF test equipment
- Provide technical input and support estimation, planning, and delivery
Ideal Skills & Experience:
- RF and analogue circuit design and testing
- EM and large-signal simulation experience
- Experience with RF cascade analysis and PCB integration
- Knowledge of electronic components and systems
- Understanding of requirements management and system engineering processes
- Strong collaboration and communication skills
Qualifications & Security:
- HND/HNC or Degree in Electrical & Electronic Engineering or related STEM field
- Must be a UK or EU citizen (eligible for SC clearance)
- Current valid SC clearance is a plus
If you're looking to push your career forward in the RF/defence domain, this is a fantastic opportunity to make your mark on mission-critical technology.....Read more...
Are you an RF Engineer ready to step up into a more senior, impactful role? Were looking for a talented engineer with hands-on RF experience to help develop the next generation of Electronic Counter Measure (ECM) systems.
This is a fantastic opportunity to work on cutting-edge defence technology with a growing team at the forefront of RF and Electronic Warfare innovation.
As an RF Hardware Engineer, youll join an expert engineering team focused on designing and verifying high-performance RF sub-systems, including transceivers and power amplifiers from DC to 12GHz. Youll be involved in the full lifecycle, from simulation and design to implementation and integration.
Key Responsibilities:
- Design and verification of complex RF and analogue sub-systems
- Simulation and implementation of broadband power amplifiers and T/R switches
- Collaborate with software, firmware, PCB, and mechanical engineers
- Work with SPICE, EM simulators, and Mentor Graphics tools
- Support integration and test using RF test equipment
- Provide technical input and support estimation, planning, and delivery
Ideal Skills & Experience:
- RF and analogue circuit design and testing
- EM and large-signal simulation experience
- Experience with RF cascade analysis and PCB integration
- Knowledge of electronic components and systems
- Understanding of requirements management and system engineering processes
- Strong collaboration and communication skills
Qualifications & Security:
- HND/HNC or Degree in Electrical & Electronic Engineering or related STEM field
- Must be a UK or EU citizen (eligible for SC clearance)
- Current valid SC clearance is a plus
If you're looking to push your career forward in the RF/defence domain, this is a fantastic opportunity to make your mark on mission-critical technology.....Read more...
An exciting job opportunity has arisen for an Electronics Test Engineer, to join a globally leading company, based in Gloucestershire, specialising in the design and manufacture of diagnostic instrumentation.
Due to exceptional growth, our client has recently relocated to new state of the art facilities, in Gloucestershire. They are now seeking a seeking an Electronics Test Engineer, to join a dynamic team, responsible for diagnostics and fault finding on returned devices and conducting quality investigations.
Role and Responsibilities:
Perform diagnostic testing and fault analysis on devices returned under warranty.
Repair or replace defective components, ensuring devices meet operational specifications.
Document detailed findings and repair procedures, following internal repair protocols.
Conduct NCR investigations and root cause analysis for product failures.
Investigate customer complaints and warranty returns.
Skills and Qualifications:
Proven experience in diagnostics, fault finding, and repair of electronic or electro-mechanical devices
Experience with IPC-A-610 standards for electronic assembly and soldering quality and IPC -A-620 for requirements and acceptance of Cable and Wire Harness Assemblies.
Familiarity with electronic test equipment (oscilloscopes, multimeters) and software-based diagnostic tools.
Experience in conducting NCR investigations, including root cause analysis and corrective actions.
Relevant certifications such as IPC-A-610, IPC/WHMA-A-620, or similar industry-recognized qualifications are desirable.
To apply for this fantastic Electronics Test Engineer opportunity, based in Gloucestershire, please send your CV to Natalie Tyler at ntyler@redlinegroup.Com quoting SKK1168.....Read more...
R&D Project Manager – Machine Learning – Cambridge
Are you an experienced engineer who is looking for a new role within a fun, fast-paced commercial environment? A small, tight knit team in rural Cambridgeshire are looking for passionate machine learning specialists to join their award-winning team of engineers and programmers.
This exciting new role will give the Project Manager an excellent opportunity to work on some really exciting and cutting edge products within the machine learning field. As this is a relatively small team you will need to take a hands-on approach and lead a team of fellow scientists and engineers. This will give you the opportunity to thrive within one of the fastest growing sectors within technology.
On a day to day basis you will use your skills and expertise to develop and test new technologies around optimisation, pattern recognition and forecasting to improve efficiency of energy solutions and distribution.
To be considered for this exciting role you will need to have a degree in Computer Science, Electronics or relevant field as well as experience with either machine learning or deep learning. You will also need to have a genuine passion for this sector and a relevant PhD and post-doc experience would be highly advantageous.
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing excellent career progression. The company also offer excellent training to further develop your skills.
For more information, please call Matthew Lowdon of Newton Colmore Consulting on 0121 268 2240 or make an application and one of our team will be in touch.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Key words: Computer Science, Software Engineer, Electronics, Computer Vision, Deep Learning, Machine Learning, Image Processing, Cambridge
....Read more...
Electronics Design Engineer – Medical Devices FPGA – Cambridge
An exciting and growing Medical Devices organization based in Cambridge is currently seeking an experienced Electronics Design Engineer to work on the development of life-saving and life-improving Medical Devices.
With a primary focus on FPGA design, you will collaborate with other electronics engineers, mechanical engineers, software engineers, physicists, and scientists in the development of these Medical Devices.
In addition to FPGA Design, you will also engage in hands-on prototype development, using soldering to construct the electronics you have designed.
You will be working with highly complex technologies, ensuring that your work remains challenging every day.
Ideally, you would have prior experience in electronics design for Medical Devices. However, we are open to candidates from other highly regulated sectors, as long as your expertise lies in FPGA electronics design.
It is expected that you hold a degree in electronics engineering. Nevertheless, if you have transitioned into an Electronics Design Engineering role through an alternative path, we would still like to hear from you, as industry experience holds significant importance.
Your dedication will be rewarded with an excellent starting salary, opportunities for career development, job security, bonuses, a pension plan, life assurance, and other outstanding benefits.
Given the anticipated high level of interest in this role, if you are seeking a new opportunity, we recommend submitting your application promptly to avoid missing out.
For more information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment, and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will get in touch with you.
Newton Colmore Consulting is a specialized recruitment company operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Mechanical Design Engineer (CAD Tooling) – London – £42 - £52 per hour Umbrella DOE – Contract (up to 2 Years)Primary Purpose and Overall Objective of the Job: We are seeking a CAD Tooling Design Engineer to be responsible for the definition and design of new tooling to support the industrialisation and introduction of new high-reliability submerged products into production. This role involves designing and defining new tooling and equipment to simplify the assembly of Optical/Electrical products while ensuring high standards of quality and reliability.Key Responsibilities:
Collaborate with Supply Chain Engineers and R&D teams to design and industrialise new submerged products.
Define and design tooling and equipment to streamline product assembly and testing processes.
Propose innovative tooling solutions to reduce assembly time and improve efficiency.
Use Creo CAD software for tooling design, ensuring compliance with company standards.
Present new tooling concepts to stakeholders and oversee their production.
Source and manage external equipment suppliers, ensuring timely and efficient delivery.
Inspect new tooling to ensure conformance with specifications and drawings.
Validate new tooling across various mechanical models for operational effectiveness.
Provide operator training on the use of new tooling and build processes.
Support manufacturing with tooling maintenance, troubleshooting defects, and working on design improvements.
Conduct DFMEA, root cause analysis, and corrective actions for tooling-related issues.
Education, Knowledge, and Experience:
Engineering degree in Mechanical, Industrial, or Production Engineering (or equivalent)
Proficiency in Creo CAD package advantageous, or similar CAD Design/Modelling software
Experience in a technical and/or manufacturing environment
Strong organisational, problem-solving, and interpersonal skills
Ability to make engineering judgments under pressure
Competency in Microsoft Excel and Word
How to apply: To apply for this excellent opportunity, please send your CV or contact Rob Hutchings at 02392 314679.....Read more...
.NET Developer - Software House – Peterborough
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Do you want to work for an internationally recognised brand? Do you want to work on enterprise level .NET / C# software development projects and gain exposure to cutting edge technologies? Do you want to experience a truly sophisticated Agile development environment? Then look no further!
Our client is an award winning software house with a strong presence in over 30 countries. Due to continued growth and expansion we are seeking several .NET / C# Developer to join their dynamic team of high flying individuals. .NET Developer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide training into: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, SQL Azure and MongoDB.
You will be working alongside an MVP and well respect author on Agile and .NET / C# development. This is a truly fabulous opportunity to join a spectacular organization; one that offers a structured career progression programme, excellent training, exquisite offices and amazing benefits.
Location: Peterborough, UK / Remote Working
Salary: £35,000 - £65,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer - Software House – Welwyn Garden City
(Tech stack: .NET Developer, .NET 9, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Do you want to work for an internationally recognised brand? Do you want to work on enterprise level .NET / C# software development projects and gain exposure to cutting edge technologies? Do you want to experience a truly sophisticated Agile development environment? Then look no further!
Our client is an award winning software house with a strong presence in over 30 countries. Due to continued growth and expansion we are seeking several .NET / C# Developer to join their dynamic team of high flying individuals. .NET Developer applicants should be experienced in: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide training into: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and MongoDB.
You will be working alongside an MVP and well respect author on Agile and .NET / C# development. This is a truly fabulous opportunity to join a spectacular organization; one that offers a structured career progression programme, excellent training, exquisite offices and amazing benefits.
Location: Welwyn Garden City, Hertfordshire, UK / Remote Working
Salary: £55,000 - £85,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
Security Cleared Firmware Engineer – DSP Engineer - Cambridge – Spin-Out Company
A new Spin-Out company, based in Cambridge, providing product development for Security Cleared sectors, is currently looking for an experienced Firmware Engineer or DSP Engineer to work on a wide range of new technologies.
You will be working on a range of new technology inventions, providing expert approaches to Firmware Engineering and DSP Engineering applications. Due to the varied nature of the work, we ideally seek someone with knowledge of FPGA, DSP design and engineering, DSP Modelling, and design using embedded systems. Not all of these areas are required, but having experience in as many as possible in your past roles as a Firmware Engineer or DSP Engineer would be advantageous.
Specific experience working on high-speed electronic systems would be ideal but is not essential.
If you have previously worked in a security-cleared environment, it would be fantastic, although not essential as they are open to candidates from different sectors. However, you must be able to obtain security clearance. This usually means being a British Citizen or residing in the UK for five years in continuous employment. If you already hold security clearance from another source, this would be acceptable.
You are going to work on some extremely interesting projects that will help you continually develop your career. Apart from this, you will receive an excellent starting salary and a benefits package in line with the parent company, along with continuous career training for future progression.
We are looking for someone to start as soon as possible, so if you are interested, we recommend making an application now to avoid missing out. However, we understand you may have a long notice period, which can be normal in this sector.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Intermediate Electrical Design Engineer
City of London
£50,000 - £55,000 Basic + 4 days office 1 day working from home + long term career stability + social events + strong order books + annual leave + pension
Work for an established electrical contractor as an intermediate electrical design engineer working on commercial projects across London. Work in a small close knit team of established experts and play an integral part in designs and customer satisfaction. Long term you’ll become a valued and respected employee receiving constant recognition and reward.
Established over 10 years ago this growing contractor continues to expand and are looking for an intermeditate electrical design engineer due to excellent work standards and maintaining strong relationships and consistent delivery of projects. Work in a small team based in central London, take complete control and autonomy with your work. Benefit from a stable career and unparalleled job security.
The role of the Intermediate Electrical Design Engineer will include: *Creating electrical designs to client specifications of LV systems, emergency lighting, data systems and more using design software *Communicating with senior management, clients and DNO’s for upgrades, updates on projects and more, also working along side architects, structural engineers and contractors *Attend design meetings, producing design risk assessment, advising on specifications and changes and providing technical input for tender submissions.
The successful Intermediate Electrical Design Engineer will need: *HND or HNC in Electrical Design or equivalent/relevant qualifications *Experience designing for commercial construction projects *Commutable to the office 4 days per week
For immediate consideration please contact Emily on 0203 813 7951 and click to apply.
Keywords: Electrical Design, construction design, engineering, commercial electrician, electrician, engineer, electrical design engineer, construction, london, north london, south london, east london, west london
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
This Process Safety Engineer position is working with a globally leading chemical manufacturer based in the Wigan area who specialise in the manufacture of bespoke resins. Alongside an annual salary up to £70,000 (experience dependent), there is a benefits package which includes a company pension contribution, healthcare (BUPA), 33 days holiday including bank holidays, with working hours of 8am – 4pm Monday to Friday.
The main purpose of the Process Safety Engineer is to provide Technical support to the Site to ensure effective implementation of regulatory requirements whilst observing risk management procedures. This includes providing support under the DSEAR & COMAH regulations in the UK.
Responsibilities of the Process Safety Engineer :
• The Process Safety Engineer will produce Technical deliverables as required in support of the business, whilst developing H&S philosophies, design HSE plans, specifications, equipment specifications.• You will chair and participate in formal assessments such as HAZID, HAZOP, and SIL target setting studies, generate study reports and manage subsequent actions, alongside leading HAZID and SIL studies.• Participate in project design assurance reviews such as P&ID reviews, Constructability reviews.• Responsible for Hazardous area classification following industry codes and guidance and develop and implement functional HSE management plans.• In charge of producing and reviewing specifications, data sheets, schedules, study reports, and design calculations; ensuring that they conform to quality, competence, and project management systems.• You will provide technical support to projects and sites as required whilst adhering to and complying with relevant discipline specific procedures, and providing feedback for continuous improvement.• The Process Safety Engineer will ensure self-awareness of relevant regulatory framework, legislative changes, initiatives and industry technology developments.• You will hold thorough knowledge and understanding of the fundamentals environmental methodologies, software systems, and design practices as they relate to FEED, Detail Design, Construction, Commissioning, and plant Start- up, whilst holding an awareness of international codes and standards.
To be successful in this position as Process Safety Engineer , you will:
• Be degree qualified in a relevant Eng. / Chemical Discipline.• Holding a chartered status would be highly beneficial.• Have strong experience working relevant roles within the Chemical Manufacturing industry. • Demonstratable knowledge of COMAH, DSEAR, RA techniques and H&S Legislation. • Proficient leading HSE studies: HAZOPs, PHA, HAZID, LOPA etc. • Knowledge of manufacturing improvement strategies such as Six Sigma, Lean, FMEA etc.
Please apply directly for further information regarding this Process Safety Engineer role.
....Read more...
Graduate Engineer £30K a year, Monday to Friday, permanent position, Monday to Friday. No weekend work, Growing Company, Private heath care, 33 days holiday Location of the Graduate Engineer Position: High WycombeWe are seeking a motivated and talented Graduate Mechanical or Electrical Engineer to join their dynamic team. This is an great opportunity for someone to kick-start their career and gain hands-on experience in a fast-paced, innovative environment.The role would be supporting the existing team on existing and R&D projects the company is involved in.They operate in a clean, bright manufacturing facility, and are leading players in the sector in which they operate.The company will not be able to support individuals that require sponsorship. UnfortunatelyKey Responsibilities of the Graduate Engineer position
Assist in the design and development of components, assemblies, and systems using CAD tools such as SolidWorks, AutoCAD, or Inventor
Produce and maintain accurate 2D drawings and 3D models
Support design calculations, simulations, and analysis
Participate in product prototyping, testing, and validation
Work closely with manufacturing, production, and quality teams to ensure design intent and feasibility
Contribute to technical documentation, including BOMs etc
Support continuous improvement and innovation across our product lines
The ideal Graduate Engineer will have:
A degree in Mechanical, Electrical , Product Design, or a related field
Proficiency in CAD software (e.g., SolidWorks, AutoCAD, Inventor)
Strong understanding of engineering principles and design fundamentals
Excellent attention to detail and a proactive attitude
Good communication and teamwork skills
Eagerness to learn and grow in a supportive environment
What’s of offer:
Salary: Circa £30K a year
Full time permanent positions
Full training and mentorship from an experienced team
Exposure to real-world projects from day one
Career progression opportunities
Competitive salary and benefits package
A collaborative, forward-thinking company culture
If you would like a private chat about the Graduate role, please contact Rodger Morley at E3 Recruitment. ....Read more...
We are seeking an experienced Chartered Structural Engineer to lead and oversee the structural engineering aspects of ultimate screw piling projects. In this key role, you will be responsible for the design, analysis, and supervision of deep foundation solutions, ensuring safety, compliance, and technical excellence throughout all project phases.
Key Responsibilities of a Chartered Structural Engineer:
- Design and Analysis: Develop and assess structural designs for screw piling foundations, including calculations for load, stress, and stability using advanced modelling software135.
- Technical Leadership: Provide expert technical advice on screw piling solutions, materials selection, and construction methodologies to clients, contractors, and multidisciplinary teams13.
- Quality Assurance: Oversee site inspections and quality control procedures to ensure compliance with design specifications, industry regulations, and health and safety standards35.
- Project Management: Manage commercial projects from inception to completion, including preparation of reports, drawings, and contract administration15.
- Collaboration: Work closely with architects, civil engineers, and contractors to integrate structural solutions into overall project plans and resolve complex engineering challenges14.
- Innovation: Contribute to the continuous improvement of design processes, materials, and techniques for screw piling and deep foundation systems.
Essential Requirements:
- Chartered Engineer (CEng) status with a recognised professional engineering institution1.
- Degree in Civil or Structural Engineering (or equivalent).
- Proven experience in structural design and analysis, with a strong background in deep foundations or piling projects23.
- Proficiency in industry-standard software (e.g., AutoCAD, Tedds, or similar).
- Excellent communication and project management skills.
- Full UK driving licence (preferred).
Desirable Attributes:
- Experience with ultimate screw piling or similar deep foundation techniques.
- Knowledge of Eurocodes and British Standards.
- Ability to lead and mentor junior engineers.
Benefits:
- Competitive salary and benefits package.
- Opportunities for professional development and career progression.
- Dynamic and supportive work environment.
If you have the required skills and experience then we urge you to apply. Alternatively please call Ian at Holt Engineering on 07734406996.....Read more...
Undertake design and calculations using computer software
Create technical drawings using Autodesk Revit, a 3D drawing package
Attend project meetings and site visits
Regularly undertake in-house training to develop your skills
Training:
BEng (Hons) Building Services Engineering
Day-release (one day per week) at Leeds Beckett University
Training Outcome:Progression to engineer and senior engineer.Employer Description:Ridings specialise in providing Building Services Engineering design and project management solutions for refurbishment and new construction projects working independently or with architects, developers, project managers, property owners, quantity surveyors, local authorities and contractors. We have significant expertise in the design and supervision of building services required by the commercial, industrial, public and private sectors. At Ridings, we provide a proactive personal service meeting the demands of our clients for responsive, yet innovative solutions. Our aim is to work with clients to achieve their aspirations in terms of quality, delivery and cost to ensure they receive expert advice from concept to completion.Working Hours :Monday to Thursday 8am to 4.30pm, Friday 8am to 2pm.Skills: Communication skills,IT skills,Problem solving skills....Read more...
An exciting opportunity has arisen for an Electrical Installer / Electrical Tester with experience working in the social housing sector to join a well-established construction firm. This role offers a salary range of £42,500 - £47,500 and benefits.
As an Electrical Installer / Electrical Tester, you will be responsible for performing electrical upgrades, partial and full rewires, consumer unit replacements, Aico smoke alarm installations, testing, and EIC's, EICRs.
You will be responsible for:
* Documenting completed works and reporting to your supervisor.
* Carrying out remedial work and installations, including alarms, consumer units, emergency lighting, rewires, and wet rooms.
* Handling day-to-day reactive maintenance tasks.
* Ensuring efficient and cost-effective planning and execution of tasks.
* Proactively managing workloads to meet deadlines.
What we are looking for:
* Previously worked as an Electrical Tester, Electrician, Electrical Engineer, Electrical Test Engineer, Electrician Improver, Electrical Installer, Electrical Assessor, Electrical Maintenance Engineer, Electrical Contractor, Electrical Wire Tester, Testing Engineer, EICR or in a similar role.
* Experience working on social housing contracts or similar environments.
* Background in fault finding, testing, and inspecting electrical work.
* NVQ Level 3 in Electrical Installation and Inspection & Testing (2391 or equivalent).
* 18th Edition City & Guilds.
* Skilled in Microsoft software and other relevant technologies.
* Full, clean driving licence.
* Possess own tools.
Apply now for this exceptional Electrical Installer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
During your apprenticeship, you will gain exposure, personal development, and experience within a wide range of technical areas at Resonate, growing your personal network and enabling us to collaboratively work out your career preferences and future direction.
We offer different specialisms, and you’ll have the opportunity to rotate across disciplines which may include:
Software Engineering
Project Management
Infrastructure/ DevOps
Quality Assurance / Software Testing
Training:You will study towards a BSc (Hons) Digital and Technology Solutions degree at MK:U - Cranfield University’s undergraduate brand.
Education at MK:U is different from other universities. Instead of traditional lectures and exams, MK:U’s entire curriculum uses problem-based learning (PBL) as their core educational approach. You will spend 20% of your time studying with MK:U on a day release basis (hybrid remote and in-person attendance) and the other 80% developing your career with us.Training Outcome:Whilst we will collaboratively work out your career preferences and future direction, your apprenticeship studies could take you into one of four different roles once qualified:
Software Engineer
Project Management
Infrastructure/ DevOps
Quality Assurance / Software Testing
At work, you will gain exposure, personal development, and experience within a wide range of technical areas associated with the software development life cycle at Resonate. Employer Description:We provide software products and services that are already improving the operational delivery of rail services. Our vision is to create a truly connected rail network, using our deep technology expertise and rail industry experience to deliver game-changing solutions that improve the quality of transport across the UK and beyond. We are a company that is excited by the possibilities offered by technology and are driven by improving experiences for passengers globally.
We have consistently innovated to create best in class software products, delivering high levels of automation into complex operational environments. We continue to evolve and offer our own integrated Traffic Management System; an operational and technical first. Our service offer continues to grow, taking advantage of technological advancements including cloud and data analytics.Working Hours :We have embraced hybrid working, with a normal work pattern of Monday to Friday. We have flexibility of when and where we work around the minimum 2 to 3 days a week in our Milton Keynes office.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Enthusiasm for technology,Passionate about what you do,Curiosity....Read more...
Position: Automotive Engineer / Design Engineer
Job ID: 2127/41
Location: Devon
Rate/Salary: £50,000 + dependent on experience and expertise
Benefits:
Engineering Chartership enrolment
Private pension scheme
Life insurance (4x salary)
25 days annual leave
MOD Reservist training days (Gold Award – 10 days)
Travel and secondment opportunities to Australia
Family Day (subject to availability)
Discretionary bonus upon 1 year of service
Type: Full-time – Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy, and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies. We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Automotive Engineer / Design Engineer
Typically, this person will be responsible for producing and advising on innovative and cost-effective automotive designs using CAD tools to a high standard and within specified timeframes. This role supports cutting-edge projects involving MOD vehicles and advanced automotive systems and is ideal for someone with a deep understanding of vehicle engineering and component integration.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the Automotive Engineer / Design Engineer:
Produce innovative automotive designs focused on functionality, simplicity, and cost-effectiveness
Advise mechanical engineers on the integration of automotive systems into overall product designs
Use 3D CAD software (preferably SolidWorks) to create models and detailed engineering drawings
Design components including sheet metal, machined, cast, and fabricated parts from concept to production
Evaluate and revise existing drawings and designs to meet updated requirements
Maintain accurate drawing records, using PDM systems for issue control
Collaborate with project and senior engineers to deliver optimal design solutions
Liaise with suppliers to manage component sourcing and address obsolescence
Support prototype assessments for correct fit and functionality
Assist with the physical testing of vehicles and systems, including work with Trials Engineers
Select materials based on performance specifications
Participate in and incorporate feedback from design reviews
Conduct vehicle testing using data logging and instrumentation
Support documentation, report writing, and data recording throughout projects
Ensure compliance with quality, safety, GDPR, and internal company policies
Undertake relevant training as required for the role
Qualifications and requirements for the Automotive Engineer / Design Engineer:
Essential:
Prior experience working in an automotive engineering role
Minimum of HNC in Automotive, Motorsport, Mechanical Engineering, or related discipline
Strong 3D CAD skills (preferably SolidWorks – training can be provided)
Proven ability to produce detailed models and technical drawings
Broad knowledge of automotive systems (practical and theoretical)
Familiarity with drawing control and PDM systems
Strong communication skills, both verbal and written
Proficient in Microsoft Office and general computer use
Good documentation, report writing, and presentation skills
Structural analysis using first principles and basic FEA (e.g., ANSYS)
Experience with data logging and instrumentation for vehicle testing
Full UK driving licence – Category B (Category C desirable or willingness to train)
Desirable:
Engineering Degree
Experience working in workshop, manufacturing, or production environments
Experience presenting technical data and contributing to design reviews
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role.....Read more...
Civil EngineerNewcastle£35,000 - £40,000 - Stable Company + Progression + Hybrid work + Yearly Review + Immediate Start Join a growing company specialising in drainage developments as a Civil Engineer and become an integral part of their evergrowing team where your skills will be valued, and improved on. You'll work alongside a close-knit team and seniors and become a major part of the company's growth.With success and steady growth driven by a reputation for high-quality workmanship and strong relationships with both clients and colleagues, this is an excellent opportunity for a Civil Engineer to join a well-respected team and grow your skills. In this role, you’ll play a key role in ensuring projects are delivered to the highest standard, enjoy ongoing recognition for your work and exceptional growth. Become a valued team member, not just a number.Your Role As Civil Engineer Include: * Designing Drainage Systems – Creating plans for surface water and foul water drainage using software like MicroDrainage, Causeway Flow, Causeway PDS, Causeway Live Design, AutoCAD, Civils 3 * Site Inspections & Surveys – Visiting sites to assess drainage needs, monitor construction, and ensure compliance with design specifications. * Liaising with Stakeholders – Coordinating with architects, local authorities, contractors, and utility providers to integrate drainage solutions. * Producing Reports & Calculations – Preparing drainage strategy reports, flood risk assessments, and hydraulic calculations for planning and approvals. * Problem Solving & Compliance – Troubleshooting on-site drainage issues and ensuring systems meet environmental regulations and building codesThe Successful Civil Engineer Will Need:* Experience working within drainage Civils * HNC as a minimum in civils * An interest in working towards Chartership * A full UK driving licence * Eager to learn and develop professionally, with a genuine interest in career progression and further trainingFor immediate consideration call Bradley Gilbert on 020 3813 7943 and click to apply!Keywords: Drainage Engineer, Civil Engineer, Newcastle, Sunderland, drainage design, flood risk assessment, SUDS, MicroDrainage, Civil 3D, stormwater management, foul water drainage, highway drainage, surface water systems, hydraulic modelling, drainage strategy, DMRB standards, sewer design, drainage compliance, water infrastructure, drainage calculations, drainage planning, environmental engineering, infrastructure projects, urban drainage, AutoCAD Civil 3D, Section 104, Section 106, drainage networks, civil design engineer, drainage consultancy.This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Redline Group have recently been engaged by a leading Engineering company based in Manchester. Due to recent project wins they are now looking to recruit an experienced Electronic Design Engineer to be part of their dynamic design team.
The culture is very collaborative where engineers work together to solve engineering related problems and find the best solutions. As such they are looking for like-minded engineers who can really add value to the team. The company currently operate a hybrid working arrangement of 3 days onsite, 2 from home with everybody in on a Wednesday
The company design and manufacture electronic sensors and components for the global Automation market and they are looking for an Electronic Design Engineer with sound analogue design skills combined with some firmware development using embedded C or C++.
Key responsibilities of the Electronic Design Engineer job:
Design and development of barriers for connection between intrinsically safe circuits and non- intrinsically safe circuits
Circuit design, prototyping, verification and release testing
Specification of the design components and creation of the circuit schematic in CAD
Creation of the Intrinsic Safety and EMC Plans required to meet IS and EMC standards
Verification testing of prototypes and review PCB layouts
Key skills required for the Electronic Design Engineer job:
Excellent understanding of electronic/engineering principles and Analogue and Digital circuit design experience
Knowledge of EMC and functional safety requirements
Op-Amp Circuits, Low power/signal transformers and small signal SMPS knowledge is an advantage
Software programming experience will be beneficial
It would be advantageous if you had any knowledge or experience of process control automation methods and instrumentation or of relevant legislation (ATEX, Low voltage, EMC directives). This role would be perfect for someone with a genuine interest in analogue electronics and a solid understanding of the fundamentals electronic design principles.
This is a great chance for an Electronic Design Engineer to join a successful and stable business with the opportunity to progress their career long term.
My client are in a great location as Manchester is very easily accessible, but they are also on the edge of the Peak District so there is the best of both city and rural life.
To apply for the Electronic Design Engineer job based in Manchester or if you have any questions, please contact Ricky Wilcocks on 01582 878810 or 079317 88834 or email rwilcocks@redlinegroup.Com....Read more...
BMS Commissioning Engineer London £60,000 - £70,000 + Car Allowance + Training + Holidays +Pension + Door To Door + Immediate Start! Exciting opportunity for a Commissioning Engineer to join a highly regarded, independent BMS company with a reputation for excellence. This is your chance to work on major commercial projects across London, with a business that values its people and invests in their growth through training and mentorship.
In this role, you’ll take ownership of commissioning tasks on both plant and BMS systems, ensuring projects are completed to the highest standard. You’ll work closely with a supportive leadership team who promote a positive, open-door culture and offer clear communication at every stage. Enjoy the stability of a business with a strong client base and a focus on long-term success, plus access to continuous development to help you stay at the forefront of the industry. Your Role As A BMS Commissioning Engineer: * Communicate with Projects Managers with progress updates and any changes on site * Commissioning of plant and software, updating commissioning tick sheets, reporting on blockers and progress * Travel to sites around M25 *Work on exciting projects across Central London and manage commissioning process from start to finish As a BMS Commissioning Engineer You Will Have: * Engineering qualification or certificates of proof working on any of the following: tridium, trend, delta, automated logic, north, Schneider electric
* Ensure all aspects of a building’s management system function correctly and efficiently
* CSCS Card
* UK Driving License
For immediate consideration please call Yusra on 07458163045 and click to apply. Keywords: BMS, Commissioning, Engineer, Field Service Engineer, Tridium, Trend, Delta, Automated logic, Trouble Shooting, North, Schneider electric, London, North London, West London, South London, East London, Hertfordshire, Essex, Slough, Watford, Northwood, North Watford, Bushey, Stanmore, Edgeware, CSCS, Delta, Building Management System, HVAC, Lighting, Security , sensors, control panels This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.....Read more...
A growing medical devices company in Cambridge are searching for an experienced research and development test engineer to join their in-house testing team.
As a Mechanical Test Engineer within this organisation, you will be utilising your experience to determine the performance and reliability of brand-new physical products within the medical devices sector.
You will be charged with building prototypes and designing and running experiments to gather performance data on new products as well as created novel test methods and protocols. You will be working closely with the laboratory manager to help push the team forward with new ideas.
It will be your role to ensure that exciting new breakthrough products can make the successful transition from initial concept to verification and manufacturing. This will be done by creating bespoke prototypes and testing programmes which will provide detailed data and insights that can be translated into real-world improvements.
To be considered for this role, we are ideally looking for a candidate who has the following;
Experience of mechanical testing on physical products with knowledge of force testing equipment.
Working knowledge of LabView or basic python programming experience.
A methodical and structured approach to solving problems
The company are offering tailored packages for the right engineer which includes a series of benefits including performance bonuses, free lunches and breakfasts and competitive pension plan.
If you would like to find out more about this opportunity, make an application now and one of our team will be in touch to discuss it further.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
....Read more...
The apprenticeship role is a very varied role with exposure to all systems and technologies. The apprentice will be seen as a L1 engineer who will be first point of contact for all tickets and then escalating/re-allocating where necessary.
The role will be 50/50 between field engineer work and office-based work. Jobs can vary from onsite installation of pre-configured hardware to onsite troubleshooting devices with a senior engineer over the phone.
The is opportunity for project work working alongside the implementation team, projects can include email migrations, data migrations, office moves, phone system setups or networking infrastructure upgrades.
The apprentice will be responsible for all inbound/outbound goods into the office and management of stock.
Types of tickets can include User on-boarding/off-boarding, laptop/desktop builds and installation, troubleshoot software issues providing remote assistance (printers, MS applications, Configuration of applications).
Your duties and responsibilities in this role will consist of:
Logging tickets as they come in
Taking helpdesk calls and dealing with L1 tickets
Base setups of desktops/laptops
Management of inbound/outbound goods
Responsible for stock in the office, making the Head of Field aware of shortages of equipment
Training Outcome:Opportunity for full-time work with an option for a career path into a specialist area.Employer Description:Global MSP, with a 24/7 Helpdesk and NOC. Wizard Group have multiple companies, IT, Cyber, AI and Cloud. The apprenticeship is for IT.Working Hours :Monday - Friday 08:30 - 17:30 and every other weekend 1 day working same times from the London office.Skills: Attention to detail,Basics of networking,Understanding Hardware,Efficient in Microsoft Office,Punctuality,Good communication skills,Team player....Read more...
As an apprentice, your day-to-day tasks will vary, as we’ll expose you to all aspects of our work:
How to produce detailed designs and drawings
Use the latest computer modelling software
Undertake site surveys
Research ground-breaking technologies
Have regular meetings with project teams, clients or end users
Prepare engineering system designs on computers
Writing specifications
Monitoring progress on construction sites
Training:
You will receive one day study leave during term times to attend university to work towards your BSc or BEng Building Services Engineering degree
The Level 6 Degree Apprenticeship for Building Services Design Engineer will provide a route to gain Incorporated Engineer (IEng) status
The typical duration for this apprenticeship is 66 months, but this will depend on the previous experience of the apprentice and opportunities to gain the full range of competence
Functional Skills in English if required
Training Outcome:
Graduate Electrical or Mechanical Engineer
Potential job opportunities in the sector
Employer Description:Hoare Lea is an award-winning engineering consultancy with a creative team of engineers, designers and technical specialists. We provide innovative solutions to complex engineering and design challenges for buildings.
Irrespective of the scale or complexity of a project, we provide a full range of MEP, environmental and sustainability services, bringing buildings to life and ensuring that they perform in operation as well as they lookWorking Hours :Monday- Friday
8.30am- 5.00pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Respond to user enquiries and provide technical assistance, troubleshooting hardware and software issues, both in person and remotely
Assist in the installation and configuration of computer hardware, software, and networking equipment under the guidance of senior technicians
Collaborate with the IT team to develop and maintain documentation, including system configurations, user manuals, and troubleshooting guides
Participate in technology-related projects, contributing to the design, implementation, and testing of new systems and solutions. (Projects include: Windows 11 migration and managing upgrade of WIFI networks across 18 Truck centres)
Stay updated with emerging technologies and industry trends to provide recommendations for improving IT infrastructure efficiency and effectiveness
Manage technical administration and authorisation for new starters and leavers in a timely manner for all local and group IT systems
Training:This Professional Degree Apprenticeship is designed to produce future Digital and Technology Solutions Professionals and Leaders. It has been awarded the Tech Industry Gold Accreditation by TechSkills, an organisation that brings together employers and universities to create highly skilled digital graduates.
The Digital and Technology Solutions Professional Degree Apprenticeship blends online learning, face-to-face workshops and on-the-job experience to transform learners into highly skilled tech professionals. The Degree Apprenticeship is available in four specialisms:
Network Engineer
Software Engineer
IT Consultant
Data Analyst
This programme develops core technical skills, knowledge and behaviours for the development of innovative digital solutions. Further specialism modules offer opportunities to develop technical areas of relevance to the learners’ roles.
Who it’s a good fit for?
New staff focusing on a plan to pursue a career associated with the technical department of the business
Existing staff wishing to expand their skills and career together with gaining academic skills and qualifications while studying to degree level
Existing staff who would benefit from a comprehensive personal development plan to advance their skills to a higher level
As part of their programme, learners will complete:
Fourteen learning knowledge modules teaching theory and practical application. These are primarily taught online and are supported by classroom training workshops. Five modules are taught at level 4, five at level 5 and four at level 6
Work-based portfolios & projects will be completed at work, over the course of the programme to demonstrate practical abilities.
Microsoft Azure Certification:
As part of the professional practice, learners will be able to access Cloud Academy resources, which will prepare them for taking official Microsoft certifications.
An example route of this, for Data Analysts, would be for learners to complete the Microsoft Azure Fundamentals course in Level 4 and then the Microsoft Data Engineering on Microsoft Azure at Level 5. Completion of both these exams would result in the learners completing the Microsoft learning journey of Microsoft Certified Azure Data Engineer Associate.
At Level 6 there will be additional Microsoft preparation content available if the learner and employer feel that there is a specific need.Training Outcome:90% of QA apprentices secure permanent employment after completing: this is 20% higher than the national average.Employer Description:Volvo Trucks is a world-leading truck manufacturer, committed to driving progress and shaping the future landscape of sustainable transport. At Volvo Trucks, we lead the way in transport innovation and safety. From delivering cutting-edge technology to ensuring our vehicles set the benchmark for sustainability and performance, we are shaping the future of the industry. Our dedication to excellence has been recognised globally: the Volvo FM and Volvo FH Aero scored the maximum five stars in Euro NCAP’s first truck safety assessment and were honoured with the City Safe award.Working Hours :Days and shifts to be confirmed.Skills: Communication skills,IT skills,Problem solving skills,Analytical skills....Read more...
Senior Civil Engineer Newcastle£45,000 - £55,000 + Yearly Pay Review + Stable Company + Close Knit Team + Pension + Hybrid + Immediate Start Join a growing company specialising in drainage developments as a Senior Civil Engineer and become an integral part of their team where your skills will be valued, respected, and rewarded. Long term work alongside a close-knit team and be a major part of the company's growth to come.With success and steady growth driven by a reputation for high-quality workmanship and strong relationships with both clients and colleagues, this is an excellent opportunity for an experienced Senior Civil Engineer to join a well-respected team. In this role, you’ll play a key role in ensuring projects are delivered to the highest standard, enjoy ongoing recognition for your work and exceptional job security. Become a valued team member, not just a number.Your Role As Senior Civil Engineer Include: * Designing Drainage Systems – Creating plans for surface water and foul water drainage using software like MicroDrainage, Causeway Flow, Causeway PDS, Causeway Live Design, AutoCAD, Civils 3D * Site Inspections & Surveys – Visiting sites to assess drainage needs, monitor construction, and ensure compliance with design specifications. * Liaising with Stakeholders – Coordinating with architects, local authorities, contractors, and utility providers to integrate drainage solutions. * Producing Reports & Calculations – Preparing drainage strategy reports, flood risk assessments, and hydraulic calculations for planning and approvals. * Problem Solving & Compliance – Troubleshooting on-site drainage issues and ensuring systems meet environmental regulations and building codes.The Successful Senior Civil Engineer Will Need:* Experience working within drainage * HNC as a minimum in civils * Knowledge of UK planning procedures and relevant design codes, such as Water UK Sewerage Sector Guidance * An interest in working towards Chartership * A full UK driving licenceFor immediate consideration call Bradley Gilbert on 020 3813 7943 and click to apply!Keywords: Drainage Engineer, Civil Engineer, Newcastle, Sunderland, drainage design, flood risk assessment, SUDS, MicroDrainage, Civil 3D, stormwater management, foul water drainage, highway drainage, surface water systems, hydraulic modelling, drainage strategy, DMRB standards, sewer design, drainage compliance, water infrastructure, drainage calculations, drainage planning, environmental engineering, infrastructure projects, urban drainage, AutoCAD Civil 3D, Section 104, Section 106, drainage networks, civil design engineer, drainage consultancy.This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
