The Company:
Market leader in their field
Great opportunity to take this patch to the next level
International presence
Benefits of the Field Service & Maintenance Engineer
£25k-£30k basic
Car Allowance
Pension
Mobile
Laptop
23 days annual leave
The Role of the Field Service & Maintenance Engineer
The company supply a range of Cold Storage Solutions (Freezers, Refrigeration, Temp Controlled Transport box's, Incubators & Safety Cabinets).
40 hours per week - Monday-Friday.
This is a field-based maintenance engineer role maintaining and servicing their market-leading refrigeration and related lab equipment.
Most of this equipment is in academia, pharma, research & healthcare settings.
Equipment covered is Refrigeration from cold rooms to ice machines to cryogenic freezers, and vaccine/blood storage solutions, clean air - air purifiers, biological safety cabinets and laminar flow - CO2 incubators, incubators and ovens & centrifuges
You will be covering the whole of the UK, but most of your work will be in the Midlands and the South East. Some travel away from home for short periods is required.
Their service offering covers all makes and models, not just own brand.
In addition to planned calls, you will attend reactive calls.
There will also be times where you will need to go to head office or repair/refurnish equipment that will be resold.
You will also be expected to promote the full portfolio of products and service offerings when attending customer sites.
The company encourage input and any recommendations to the service department on changes for cost
Savings and performance improvements.
Coordinate with the customer care team to ensure effective planning, organisation and delivery of service call schedule.
Ensure accurate and timely completion of all required paperwork and reports using service software.
Adherence to health and safety practices and procedures.
The Ideal Person for the Field Service & Maintenance Engineer
Very much personality led
You will ideally have a minimum of 2-years’ maintenance experience
Alternatively, you may be a commercial refrigeration engineer (FGAS qualified), looking for a new and rewarding challenge
Will also consider good, qualified field service engineers with a desire to get into the medical sector
Ability to work under pressure
Technical and problem-solving skills
FGAS certified 2079/City and Guilds Refrigeration and Air Conditioning would be an advantage
Strong organization skills
Ability to build relationships with customers with the tact and diplomacy required to deal with customers in a stressful situation and provide confident assurance
Self-confidence and ability to work independently or as a member of a team
Knowledge of GLP, GMP and other practices and legislation relevant to product area e.g. MHRA, HTA guidelines
If you think the role of Field Service & Maintenance Engineer is for you, apply now!
Consultant: Rio Barclay
Email: riob@otrsales.co.uk
Tel no. 0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector. We place all levels of personnel, up to Director across the UK and internationally.....Read more...
.NET Developer – .NET 9, C#, Blazor, Azure – Tunbridge Wells
(Tech stack: .NET Developer, .NET 9, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a crowd funded social advertising technology platform that sells services to Facebook advertisers to grow their marketing ROI. They were recently named one of 12 Facebook Strategic Preferred Marketing Developers (PMD); the highest distinction of excellence Facebook has ever offered their marketing partners. They have already grown by 100% in the past 6 months and have ambitions to quadruple headcount over the next 2 years.
We are seeking multiple gifted .NET Developer who have a genuine passion for developing revolutionary software solutions. .NET Developer applicants should have a skill set that includes: .NET, .NET Core / ASP.NET MVC, C# and SQL Server. Full training will be provided into: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and SQL Server 2022.
This is an amazing opportunity to join a firm that has revolutionized its industry and to work on groundbreaking software development projects!
Location: Tunbridge Wells, Kent, UK / Remote Working
Salary: £50,000 - £60,000k + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!....Read more...
.NET Developer – .NET 9, C#, Blazor, Azure – Basingstoke, Hampshire
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a crowd funded social advertising technology platform that sells services to Facebook advertisers to grow their marketing ROI. They were recently named one of 12 Facebook Strategic Preferred Marketing Developers (PMD); the highest distinction of excellence Facebook has ever offered their marketing partners. They have already grown by 100% in the past 6 months and have ambitions to quadruple headcount over the next 2 years.
We are seeking multiple gifted .NET Developer who have a genuine passion for developing revolutionary software solutions. .NET Developer applicants should have a skill set that includes: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Full training will be provided into: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD, Azure SQL and MongoDB.
This is an amazing opportunity to join a firm that has revolutionized its industry and to work on groundbreaking software development projects!
Location: Basingstoke, Hampshire, UK / Remote Working
Salary: £40,000 - £50,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer – .NET 9, C#, Blazor, Azure – Exeter
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a crowd funded social advertising technology platform that sells services to Facebook advertisers to grow their marketing ROI. They were recently named one of 12 Facebook Strategic Preferred Marketing Developers (PMD); the highest distinction of excellence Facebook has ever offered their marketing partners. They have already grown by 100% in the past 6 months and have ambitions to quadruple headcount over the next 2 years.
We are seeking multiple gifted .NET Developer who have a genuine passion for developing revolutionary software solutions. .NET Developer applicants should have a skill set that includes: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Full training will be provided into: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD and MongoDB.
This is an amazing opportunity to join a firm that has revolutionized its industry and to work on groundbreaking software development projects!
Location: Exeter, UK / Remote Working
Salary: £50,000 - £60,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
.NET Developer – .NET 9, C#, Blazor, Azure – Worcester
(Tech stack: .NET Developer, .NET 9, C#, Blazor, Azure, JavaScript, HTML5, CSS3, Agile, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client is a crowd funded social advertising technology platform that sells services to Facebook advertisers to grow their marketing ROI. They were recently named one of 12 Facebook Strategic Preferred Marketing Developers (PMD); the highest distinction of excellence Facebook has ever offered their marketing partners. They have already grown by 100% in the past 6 months and have ambitions to quadruple headcount over the next 2 years.
We are seeking multiple gifted .NET Developer who have a genuine passion for developing revolutionary software solutions. .NET Developer applicants should have a skill set that includes: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Full training will be provided into: .NET 9, Blazor, EF Core, Azure, JavaScript, HTML5, CSS3, Agile, TDD, BDD and MongoDB.
This is an amazing opportunity to join a firm that has revolutionized its industry and to work on groundbreaking software development projects!
Location: Worcester, UK / Remote Working
Salary: £50,000 - £60,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
Electrical Engineer – Barnstaple, Devon
Job Type: Contract Inside IR35
Rate: £45-55 p/h
Our client is looking for an Electrical Engineer to help deliver mission-critical electrical systems for ships, weapon systems, and communication platforms. If you’re a hands-on, detailed-driven individual…then this is the perfect role for you!
What You’ll Do
Design and develop electrical systems for sonar, control, and power distribution.
Integrate subsystems into complex defence platforms.
Ensure compliance with MIL-STD, DEF STAN, and EMC standards.
Run testing, validation, and qualification activities.
Produce clear schematics, test documents, and design reports.
Troubleshoot electrical issues across development and in-service equipment.
Support upgrades, obsolescence, and new technology adoption.
Work closely with mechanical, systems, software, and supplier teams.
What You Bring:
Strong electrical system design and analysis skills.
Confident problem solver with a methodical approach.
Experience in defence/aerospace/marine environments.
System integration experience on ships or other large platforms.
Hands-on testing and validation capability.
Solid knowledge of MIL-STD, DEF STAN, EMC.
Skilled documentation and attention to detail.
Team player with strong communication skills.
Experience with Zuken E3, AutoCAD Electrical, or similar tools.
Qualifications:
HNC/HND in Electrical Engineering
Minimum 5 years’ experience in electrical disciplines
Security Requirements:
UK Sole National
BPSS Cleared
Able to obtain SC
If you’re a skilled Electrical Engineer, ready to take on their next role, then please apply and drop your CV below!....Read more...
Product Design Mechanical Engineer – Medical Device – Warwick
A growing Medical Devices company, located in Warwick, is currently seeking an experienced Product Design Mechanical Engineer to contribute to the development of various Medical Devices.
As part of a team of engineering experts, including physicists, electronics engineers, scientists, and other specialists in Medical Devices, you will play a pivotal role in working on a range of projects aimed at creating life-saving and life-improving Medical Devices.
We are specifically looking for candidates with experience in Medical Devices, preferably in the areas of product design and product development. However, individuals from the life sciences sector with experience working under strict regulations will also be considered.
The ideal candidate would have a few years of industry experience and might be seeking their second role to advance their career. While a relevant degree in Mechanical Engineering or a related field is preferred, it is not essential if you have substantial experience as a Mechanical Design Engineer in the Medical Devices sector.
In return for your contributions, you will receive a competitive salary, regular salary reviews, bonuses, a pension plan, life assurance, and other outstanding benefits typically associated with larger organizations.
This is a fantastic opportunity to join a growing company that places a strong emphasis on staff development and career advancement. Due to the anticipated high level of interest, we encourage interested candidates to apply promptly to avoid missing out.
For further information, please feel free to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will reach out to you.
Newton Colmore Consulting specializes in recruiting within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
We currently have an urgent vacancy for a Service Desk Support Analyst / IT Support Engineer on behalf of our client, a National Charity, based in the St Mellons area of Cardiff. Working within an existing team you will be responsible for providing 1st and some 2nd line support to circa 1200 staff nationally within an ITIL based environment.
Due to the nature of the organisation's public services, you will be expected to go through and obtain SC security clearance and NPPV2 Police Vetting before starting the role. Therefore, you must have been a working resident in the UK for the last 4 years. Alternatively, already hold current SC security clearance.
This is a permanent role offering hybrid working options (at least 3 days in office), a salary of £26,150 and benefits.
We are looking for an individual who can offer prior Service Desk (Helpdesk Support) experience in a Microsoft Windows environment providing 1st with some 2nd line technical support including application support of bespoke applications (CRM).
We need someone who can offer:
* Experience of working in 1st / 2nd line Service Desk support role
* Windows Active Directory and Microsoft EntraID (Azure), managing computer and user accounts, groups and containers
* Hardware setup, installation, troubleshooting and diagnostic assistance (Computer, Telephone, Laptop, Printer, Scanner)
* Network support, Installation, configuration (LAN, WAN, VPN, etc.) incl. switches, routers and firewalls
* Microsoft Windows 10/11 & MS Office 2016 & O365 installation, configuration and troubleshooting
* Desktop and browser security components: including site security certificates, firewalls and anti-virus
* Supporting Voice Over IP telephony solutions, specifically Zoom Workplace
* Experience with IT Service Management tools i.e. ticket logging software, Microsoft System Centre and prior experience working in an ITIL aligned enterprise environment
* Ability to multitask across multiple incidents, be organised and have a keen eye for detail
* Naturally, as the role involves supporting users nationally you will have excellent communications skills, both verbally and written.
The service desk operates between the hours 9.00 to 17.00 Monday to Friday but may require occasional rare travel to support local offices and stakeholders throughout the country. This is a high-volume environment, and you will be dealing with circa 35-40 tickets a day. The right candidate must have the ability to take ownership of issues and see them through to resolution while providing excellent service.
In return our client offers competitive rewards and benefits including pension and life assurance, 25 days annual leave (pro-rata), voluntary benefits such as season ticket loans, cycle to work scheme, and the opportunity to play a key role in a national charity providing world-class services.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Service Desk, 2nd Line, 1st Line, Support, Helpdesk, ITIL v3 / v4, Windows Server, AD, Active Directory, Exchange 2016, Windows 11 & 10, Office 2016, O365, Firewall, Antivirus, Anti-Virus, Antispyware, Spyware, Broadband, ADSL, VPN, Microsoft Dynamics CRM, Track-IT, Skype for Business, VOIP, Networking, Azure, IT technician, IT support engineer, IT engineer, 1st line support engineer, 2nd line support engineer, 1st line engineer, 2nd line engineer, Helpdesk Engineer,
....Read more...
We currently have an urgent vacancy for a Service Desk Support Analyst / IT Engineer on behalf of our client, a National Charity, based in the St Mellons area of Cardiff. Working within an existing team you will be responsible for providing 1st and some 2nd line support to circa 1200 staff nationally within an ITIL based environment.
Due to the nature of the organisation's public services, you will be expected to go through and obtain SC security clearance and NPPV2 Police Vetting before starting the role. Therefore, you must have been a working resident in the UK for the last 4 years. Alternatively, already hold current SC security clearance.
This is a permanent role offering hybrid working options (at least 3 days in office), a salary of £26,150 and benefits.
We are looking for an individual who can offer prior Service Desk (Helpdesk Support) experience in a Microsoft Windows environment providing 1st with some 2nd line technical support including application support of bespoke applications (CRM).
We need someone who can offer:
* Experience of working in 1st / 2nd line Service Desk support role
* Windows Active Directory and Microsoft EntraID (Azure), managing computer and user accounts, groups and containers
* Hardware setup, installation, troubleshooting and diagnostic assistance (Computer, Telephone, Laptop, Printer, Scanner)
* Network support, Installation, configuration (LAN, WAN, VPN, etc.) incl. switches, routers and firewalls
* Microsoft Windows 10/11 & MS Office 2016 & O365 installation, configuration and troubleshooting
* Desktop and browser security components: including site security certificates, firewalls and anti-virus
* Supporting Voice Over IP telephony solutions, specifically Zoom Workplace
* Experience with IT Service Management tools i.e. ticket logging software, Microsoft System Centre and prior experience working in an ITIL aligned enterprise environment
* Ability to multitask across multiple incidents, be organised and have a keen eye for detail
* Naturally, as the role involves supporting users nationally you will have excellent communications skills, both verbally and written.
The service desk operates between the hours 9.00 to 17.00 Monday to Friday but may require occasional rare travel to support local offices and stakeholders throughout the country. This is a high-volume environment, and you will be dealing with circa 35-40 tickets a day. The right candidate must have the ability to take ownership of issues and see them through to resolution while providing excellent service.
In return our client offers competitive rewards and benefits including pension and life assurance, 25 days annual leave (pro-rata), voluntary benefits such as season ticket loans, cycle to work scheme, and the opportunity to play a key role in a national charity providing world-class services.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Service Desk, 2nd Line, 1st Line, Support, Helpdesk, ITIL v3 / v4, Windows Server, AD, Active Directory, Exchange 2016, Windows 11 & 10, Office 2016, O365, Firewall, Antivirus, Anti-Virus, Antispyware, Spyware, Broadband, ADSL, VPN, Microsoft Dynamics CRM, Track-IT, Skype for Business, VOIP, Networking, Azure, IT technician, IT support engineer, IT engineer, 1st line support engineer, 2nd line support engineer, 1st line engineer, 2nd line engineer, Helpdesk Engineer,
....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
Senior RF Engineer required to join a Security Cleared team Designing linear high power wide band RF amplifiers up to 200 Watts using GaN or LDMOS electronic circuits and sub assemblies for military and airborne use.
You work as part of a small dynamic RF and Hardware team and contribute across the full product lifecycle from requirements, design, test, release and support of RF designs.
Requirements
Transmitter and Receiver circuit design for military or airborne systems, MIL-STDs or DO160.
GaN or LDMOS high power wide band RF amplifiers up to 200 Watts.
RF filter design.
Antenna design with LNA, Down converter and Upconverters
PCB Design Software and RF simulation tools.
Altium, Cadence AWR Microwave Office, Ansys HFSS.
Bachelors, Masters or PhD degree in related subject
British Citizen or ability to obtain required security clearance (SC).
Responsibilities
RF Design, System Architecture, RF Simulation, Schematic capture, PCB Layout and Footprint.
Design Reviews as logical.
Design verification against specifications.....Read more...
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems. You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation.....Read more...
Power Electronics Engineer
Location: Wickford, Essex (on-site, with some travel and occasional customer visits as required)
An excellent opportunity has arisen for an experienced Power Electronics Engineer to join a well-established UK power electronics manufacturer, specialising in the design and production of advanced power supply solutions. The company develops AC-DC and DC-DC power supplies, transformer rectifiers, configurable modular systems, high-voltage systems, and fully customised designs. Serving customers across aerospace, defence, industrial, telecoms, and emerging markets such as hydrogen production and carbon capture, the business is recognised for delivering innovative, bespoke, and reliable solutions in quality-critical sectors.
This role is ideal for a hands-on engineer with strong analogue electronics and power supply design experience, who enjoys solving complex technical challenges and working across the full product lifecycle — from concept, prototyping, and testing through to customer delivery. The position also offers the opportunity to work closely with the Engineering Director, gaining mentorship with a clear pathway to grow into a future leadership role.
Main Responsibilities of the Power Electronics Engineer (based in Wickford, Essex):
Design, develop, test, and troubleshoot power supply products (AC/DC, DC/DC, rectifiers, high-voltage systems).
Lead and manage engineering projects from concept through to completion, ensuring delivery to time, cost, and quality.
Collaborate with cross-functional teams, including production and supply chain, to ensure design intent is met.
Produce and maintain technical documentation including specifications, test procedures, and design records.
Support the sales teams with technical input to customer enquiries, proposals, and specifications.
Interface directly with customers on technical issues, projects, and RMAs, ensuring smooth resolution.
Drive research and innovation to enhance products, processes, and new technologies.
Mentor junior engineers and deliver technical training to internal staff and customers.
Requirements of the Power Electronics Engineer (based in Wickford, Essex):
Degree (or equivalent) in Electrical/Electronics Engineering (Master’s desirable).
Extensive experience in electronics engineering, including PCB design.
Strong background in analogue electronics and power supply design (AC/DC, DC/DC, rectifiers, high-voltage).
Proficiency in simulation and design tools such as SPICE and CAD software.
Practical, hands-on approach to prototyping, soldering, testing, and troubleshooting.
Excellent problem-solving, analytical, and communication skills.
Flexible, detail-oriented, and able to manage multiple projects in a small but dynamic team.
Full UK driving licence and legal right to work in the UK.
Desirable Experience:
Background in telecoms power supply design or other efficiency-critical markets.
Low-level programming knowledge and/or digital design alongside analogue expertise.
Commercial awareness of electronics product development and ability to support technical sales.
Experience in quality-critical sectors such as aerospace, defence, or industrial.
This is a key role within the engineering team, offering long-term development opportunities, including progression to Engineering Director.
To apply for this Power Electronics Engineer role based in Wickford, Essex, please send your CV to:
Kchandarana@redlinegroup.com or call 01582 878 830 / 07961 158 784....Read more...
.NET Developer - World Class Entertainment Company - Canterbury
(Tech stack: .NET Developer, .NET 9, ASP.NET, C#, React, Angular 19, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, Azure SQL, Programmer, Full Stack Engineer, Architect, .NET Developer)
Our client has been producing unparalleled entertainment experiences for over 50 years. Today their global business comprises of: film studios, television stations, theme parks, media networks and retail outlets. They are about to embark upon several joint .NET / C# software development projects with Microsoft that will take the IT industry by storm!
We are seeking several .NET Developer with full project life cycle experience and a skill set that encompasses: .NET, .NET Core / ASP.NET MVC, C# and Azure SQL. Our client can provide you with Greenfield project work and exposure to: .NET 9, JavaScript, React, Angular 19, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and MongoDB.
This is a truly amazing opportunity to work for a prestigious global brand and on challenging and complex enterprise level .NET / C# software projects. Our client is quick to recognize talent and keen to promote it. Take your career to infinity and beyond!
Location: Canterbury, Kent, UK / Remote Working
Salary: £45,000 - £65,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKNETRECNOIRUKREC....Read more...
Support the design, development, testing, and implementation of software applications using technologies such as Java, C#, C++, and web platforms
Produce technical documentation, troubleshoot issues, and ensure compliance with industry standards and best practices
Programming across multiple languages and operating systems (Java, .NET, Linux, Windows, mobile platforms)
Software design, development lifecycle, and quality assurance
Security principles including risk analysis, threat mitigation, and regulatory compliance
Support with security analysis, vulnerability assessments, and the integration of secure engineering solutions into products and systems
Communication, problem-solving, and project collaboration skills
Training:Digital and Technology Solutions Professional Level 6.
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities - whether you decide to stay in the UK or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmedSkills: Communication skills,Organisation skills,Team working....Read more...
Our client is expanding their technology team and harnessing advanced AI solutions to drive innovation. They are seeking a talented Senior AI Engineer to design, develop, and deploy intelligent applications, optimize AI frameworks, and enable data-driven decision-making. Join a company that values creativity, collaboration, and cutting-edge technology.
Roles and Responsibilities
Develop, test, and maintain Python-based applications and AI solutions.
Deploy and manage containerized applications across Dev, QA, Stage, and Prod environments.
Build, maintain, and optimize CI/CD pipelines to streamline software delivery.
Monitor applications in production, troubleshoot issues, and ensure system reliability.
Collaborate with cross-functional teams to integrate AI solutions into business workflows.
Innovate using GenAI frameworks to create scalable, AI-driven applications.
Requirements
Demonstrate advanced software engineering skills in Python by adhering to established coding standards and best practices, conducting thorough code, reviews, performing effective debugging, executing comprehensive software testing, and utilizing robust version control and maintenance procedures.
Implement and maintain CI/CD pipelines using automation tools such as GitHub, Azure DevOps, Docker, and Kubernetes to streamline deployment workflows.
Develop AI solutions, containerize them using Docker, and collaborate with DevOps teams to deploy containers across enterprise-grade Dev, QA, Stage, and Prod environments.
Integrate logging, monitoring, and alerting systems into developed solutions to ensure operational reliability and facilitate proactive issue resolution.
Practical experience with GenAI agent frameworks such as langchain, langgraph, langflow, AutoGen, and others. Capability to implement, customize, and optimize these frameworks to develop innovative AI-driven applications
For more information – please apply for this job or send your CV directly and I will call you back to provide you with more details.Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
Our client is expanding their technology team and harnessing advanced AI solutions to drive innovation. They are seeking a talented Senior AI Engineer to design, develop, and deploy intelligent applications, optimize AI frameworks, and enable data-driven decision-making. Join a company that values creativity, collaboration, and cutting-edge technology.
Roles and Responsibilities:
Develop, test, and maintain Python-based applications and AI solutions.
Deploy and manage containerized applications across Dev, QA, Stage, and Prod environments.
Build, maintain, and optimize CI/CD pipelines to streamline software delivery.
Monitor applications in production, troubleshoot issues, and ensure system reliability.
Collaborate with cross-functional teams to integrate AI solutions into business workflows.
Innovate using GenAI frameworks to create scalable, AI-driven applications.
Requirements:
Demonstrate advanced software engineering skills in Python by adhering to established coding standards and best practices, conducting thorough code, reviews, performing effective debugging, executing comprehensive software testing, and utilizing robust version control and maintenance procedures.
Implement and maintain CI/CD pipelines using automation tools such as GitHub, Azure DevOps, Docker, and Kubernetes to streamline deployment workflows.
Develop AI solutions, containerize them using Docker, and collaborate with DevOps teams to deploy containers across enterprise-grade Dev, QA, Stage, and Prod environments.
Integrate logging, monitoring, and alerting systems into developed solutions to ensure operational reliability and facilitate proactive issue resolution.
Practical experience with GenAI agent frameworks such as langchain, langgraph, langflow, AutoGen, and others. Capability to implement, customize, and optimize these frameworks to develop innovative AI-driven applications
For more information – please apply for this job or send your CV directly and I will call you back to provide you with more details.Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
M365 Engineer
Duration: 3 Months Rate: £500-550p/day
Outside IR35.
Role Overview
A leading construction engineering company seeking an experienced Microsoft 365 Engineer for a short-term contract with a focus on planning and executing migration strategies across Exchange Online, SharePoint Online, OneDrive, and Teams. This is a hands-on technical role requiring a proactive individual with strong migration experience and a solid understanding of networking fundamentals.
Key responsibilities
Lead and manage office and site infrastructure, aligning with business and IT strategy
Act as a final escalation point for the Service Desk Team
Planning and executing migration strategies across Exchange Online, SharePoint Online, OneDrive, and Teams
Coordinate with third-party MSPs for network and infrastructure management
Support business continuity through proactive incident management
Monitor network health and performance, ensuring high availability and resilience
Maintain inventory and configuration records for infrastructure and software
Excellent communication and documentation abilities
Required skillset.
Proven expertise in O365 tenant-to-tenant migrations
Strong working knowledge of Exchange Online, SharePoint Online, OneDrive, Teams, and Azure AD
PowerShell scripting for automation
Exposure to hybrid Exchange environments
Routing & Switching experience – CCNA certification highly desirable
Understanding of network infrastructure and firewall configurations
Office based (4 days per week initially) – Central London.
Outside IR35.
3 month initial contract.
....Read more...
Hardware Engineer
Permanent £27k
UK • Full-time • Travel Required
We’re looking for a talented Hardware Engineer who brings energy, accuracy and a hands-on approach to every project. If you thrive in technical environments, enjoy solving real-world problems, and take pride in delivering exceptional work for customers, this role is for you!
What You’ll Do
Lead high-quality hardware builds, installations, cabling and decommissioning
Configure Windows, Linux and VMware systems with confidence
Troubleshoot complex hardware and software issues on the spot
Carry out secure data erasure both on-site and in-house
Manage diagnostics, firmware updates and warranty processes
Maintain high standards around Health & Safety and vendor best-practice
Produce clear, accurate technical documentation
Essential criteria
Strong hardware engineering experience across varied environments
Sharp problem-solving skills and a proactive mindset
Clear communication and a professional customer approach
Flexibility to travel and work occasional out-of-hours
Clean manual driving licence and valid passport
Ability to pass BS7858 vetting and work towards SC clearance
What We Offer
A competitive salary, hybrid working, a strong pension, private healthcare and dental, 25 days holiday plus bank holidays, and access to high-quality training and development. You’ll join a modern, inclusive workplace where your technical expertise genuinely makes an impact.
....Read more...
Electronics Test Engineer
Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham. Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply!....Read more...
Senior Quality Engineer – Cambridge – Medical Devices
We are currently looking for a Senior Quality Engineer for a growing Medical Devices organisation based in Cambridge. The company work on a range of different Medical Devices, providing a variety of projects and tasks in your role.
You will collaborate various Medical Devices experts, including Mechanical Engineers, Physicists, Electronics Engineers, Software Engineers, and other professionals. Your primary focus will be on Quality Assurance of Medical Devices to ISO 13485 standards, although knowledge of EN 60601 would also be advantageous.
Your responsibilities will include creating technical files and testing documentation. If you have experience of Design Assurance, this would also enhance your approach to this work.
We would expect you to have a degree that led you into a Medical Devices Quality Engineering career. However. if you have another route into a Medical Devices role, we would still be keen to hear from you.
In addition to working on various Medical Devices, you will be rewarded with an excellent starting salary, a bonus, a generous pension, life assurance, healthcare, and other excellent benefits.
Given the anticipated interest in this role, if you are looking for a new opportunity, I suggest making an application now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment, Science recruitment and Biotech recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.....Read more...
You will learn how to:
Serve as the first point of contact for all technical queries globally, ensuring swift and efficient resolution of issues
Manage the ticketing system, prioritising requests and escalating complex problems to the relevant senior team members
Provision and de-provision user accounts across various systems, managing access controls and permissions with a focus on 'least privilege'
Assist in the routine maintenance and monitoring of network, server, and cloud infrastructure
Conduct regular vulnerability assessments and system patching to ensure all devices and software are secure and up to date
Actively support the Incident Response process by investigating security alerts and applying essential security controls, such as anti-malware and firewall policies
Help to enforce internal IT policies and procedures, contributing to a strong culture of IT governance
Assist in documenting and auditing technical processes to ensure adherence to international and regional regulations (e.g., GDPR, ISO27001)
Contribute to the creation and maintenance of knowledge base articles and training materials for end-users
Training:Information Communications Technician Level 3.Training Outcome:Successful apprentices may progress into roles such as 1st Line Support Engineer, Field Engineer, or Systems Administrator, depending on performance and qualifications achieved.Employer Description:ASM unlocks your hidden potential. Whether that be from making savings on your tail spend, uncovering new opportunities or introducing you to the latest technology, ASM can be the vehicle that drives your business forward.Working Hours :Monday - Friday 9am - 5:30pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Logical,Team working....Read more...
An exciting opportunity has arisen for an IT Service Desk Analyst to join a national organisation that provides free and confidential support to individuals affected by crime or traumatic incidents.
As an IT Service Desk Analyst, you will be providing first and second-line technical support, resolving incidents and requests while ensuring the smooth operation of IT services for the organisations internal users.
This is a permanent role offering hybrid working options (1-2 days at home), a salary of £26,150 and benefits.
Key Responsibilities:
? Providing 1st and 2nd line technical support to internal staff, ensuring all incidents are resolved in a timely manner.
? Following ITIL practices to manage and escalate incidents as required, in line with agreed service levels.
? Assisting with the setup and troubleshooting of hardware and software, particularly Microsoft-based systems and applications.
? Supporting internal customers in using IT tools, ensuring effective documentation and user guides are in place.
? Participating in IT projects and contributing to the continuous improvement of the service desk function.
What We Are Looking For:
? Previously worked as an IT Service Desk Analyst, Service Desk Analyst, IT Support Analyst, 1st Line Technician, 2nd Line Technician, IT Support Technician, Service Desk Technician, IT Technician, IT Engineer, Technical Support Analyst, Technical Support Engineer or in a similar role.
? Proven experience in 1st and 2nd line IT service desk support.
? Background of working in ITIL frameworks and enterprise IT environments.
? Strong technical knowledge of Microsoft Windows, Microsoft Office, and Active Directory.
? Hands-on experience with hardware troubleshooting, particularly desktops and laptops.
? Installation, configuration, and troubleshooting of Microsoft Windows 7, 8.1, 10, and Office 2010, 2013, 2016.
This is a fantastic opportunity to join a forward-thinking organisation in a role that offe....Read more...
