The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc/ BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc/ BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
Tool and Fixture Design Engineer required to help design tools and fixtures for automotive assembly of plastic and rubber moulds for vehicle components such at gearbox, steering, Powertrain, Tyres, Axle and Suspension
The ideal candidate will also have experience designing steel fabrication systems for bespoke assembly
Skills
PPAP, APQP, Design concepts
Press Tools and Moulds
TQM
Six Sigma
Tool and Fixture Design Engineer required to help design tools and fixtures for automotive assembly of plastic and rubber moulds for vehicle components such at gearbox, steering, Powertrain, Tyres, Axle and Suspension
The ideal candidate will also have experience designing steel fabrication systems for bespoke assembly
Skills
PPAP, APQP, Design concepts
Press Tools and Moulds
TQM
Six Sigma
Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them.
Key skills
Read blueprints, identify components, perform wire preparation, stripping and crimping: perform harness repair and termination: use pertinent manual hand tools.
Electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Basic knowledge of Low Voltage and High Voltage Electronics.
Lean Six Sigma
Production Workflow
Production Test
Production Assembly ....Read more...
Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them.
Key skills
Read blueprints, identify components, perform wire preparation, stripping and crimping: perform harness repair and termination: use pertinent manual hand tools.
Electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Basic knowledge of Low Voltage and High Voltage Electronics.
Lean Six Sigma
Production Workflow
Production Test
Production Assembly ....Read more...
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom....Read more...
Technician required for an Aerospace Manufacturing facility with multiple cleanrooms working on precise liquid fuel system delivery and combustion systems. As an Engineering Technician you will work as part of a precision manufacturing team testing valve???s and valve assemblies to very tight tolerances.
Equipment
Digital voltmeters, oscilloscopes, data acquisition.
Particle counting equipment
Gas flow testing of valves
Electrical Testing
High voltage dielectronic and insulation resistance testing
Key skills
Engineering
Electronics
Multi meter
Manufacturing
LabVIEW
Test Equipment
Six Sigma
Oscilloscope
Data Acquisition
Soldering
Aerospace
LabVIEW
Cleanroom....Read more...
Quality Engineer required to apply automotive quality tools, processes and working practices to commercial vehicle electronic sensing and monitoring systems.
Key Skills
Time served with relevant automotive industry experience or aerospace, defence, medical, optical, etc.
Maintenance, management or business management systems ideally ISO9001 2015).
Automotive supply chain, Prime, Tier 1 or OEM.
ISO9001, IATF16949, AS9100, ISO45001 previously 18001, ISO14001, ISO50001, ISO27001 or ISO22301.
Far Eastern supply networks.
Technical, Engineering or Science discipline background.
Six sigma green belt or higher.
Key Responsibilities
Continuous Improvement of product quality and associated services.
Implementation and continual support for conformance to industry standards, best practices and business management systems across organisation and supply network. ....Read more...
Quality Manager required to support company wide business objectives leading change in a fast paced manufacturing environment.
Key Skills
Automotive quality management senior or management experience within an OEM environment.
Six Sigma methodologies
ISO 9001 and IATF 16949 management systems
ISO14001 advantageous
Engineering background.
Error Proofing and 8D
Core Tool experience including FMEA, PPAP, Control Plans, APQP etc.
IT skills.
Role Responsibilities
Promoting and implementing quality and continuous improvement through the organisation.
Develop and implement quality methods and practices to achieve excellent standards.
Advice on Quality Assurance system changes and implement where necessary.
Aiding Supplier quality to incorporated processes.
KPI ??? Management.
Managing the team of inspectors, Quality Engineers and metrologist, as well as internal auditors
Managing the legislation of product produced
Assisting and guiding the European subsidiaries with quality issues
Leading annual external certification audits
....Read more...
Quality Manager required to support company wide business objectives leading change in a fast paced manufacturing environment.
Key Skills
Automotive quality management senior or management experience within an OEM environment.
Six Sigma methodologies
ISO 9001 and IATF 16949 management systems
ISO14001 advantageous
Engineering background.
Error Proofing and 8D
Core Tool experience including FMEA, PPAP, Control Plans, APQP etc.
IT skills.
Role Responsibilities
Promoting and implementing quality and continuous improvement through the organisation.
Develop and implement quality methods and practices to achieve excellent standards.
Advice on Quality Assurance system changes and implement where necessary.
Aiding Supplier quality to incorporated processes.
KPI ??? Management.
Managing the team of inspectors, Quality Engineers and metrologist, as well as internal auditors
Managing the legislation of product produced
Assisting and guiding the European subsidiaries with quality issues
Leading annual external certification audits
....Read more...
Quality Manager required to support company-wide business objectives leading change in a fast-paced manufacturing environment.
Key Skills
Automotive quality management senior or management experience within an OEM environment.
Six Sigma methodologies
ISO 9001 and IATF 16949 management systems
ISO14001 advantageous
Engineering background.
Error Proofing and 8D
Core Tool experience including FMEA, PPAP, Control Plans, APQP etc.
IT skills.
Role Responsibilities
Promoting and implementing quality and continuous improvement through the organisation.
Develop and implement quality methods and practices to achieve excellent standards.
Advice on Quality Assurance system changes and implement where necessary.
Aiding Supplier quality to incorporated processes.
KPI Management.
Managing the team of inspectors, Quality Engineers and metrologist, as well as internal auditors
Managing the legislation of product produced
Assisting and guiding the European subsidiaries with quality issues
Leading annual external certification audits ....Read more...
Quality Manager required to support company-wide business objectives leading change in a fast-paced manufacturing environment.
Key Skills
Automotive quality management senior or management experience within an OEM environment.
Six Sigma methodologies
ISO 9001 and IATF 16949 management systems
ISO14001 advantageous
Engineering background.
Error Proofing and 8D
Core Tool experience including FMEA, PPAP, Control Plans, APQP etc.
IT skills.
Role Responsibilities
Promoting and implementing quality and continuous improvement through the organisation.
Develop and implement quality methods and practices to achieve excellent standards.
Advice on Quality Assurance system changes and implement where necessary.
Aiding Supplier quality to incorporated processes.
KPI Management.
Managing the team of inspectors, Quality Engineers and metrologist, as well as internal auditors
Managing the legislation of product produced
Assisting and guiding the European subsidiaries with quality issues
Leading annual external certification audits ....Read more...
Industrial Engineer urgently required for a global leading Semiconductor Manufacturing company, based in Oldham, Manchester.
A great opportunity has arisen for an Industrial Engineer to join my client, based in Oldham, Manchester who will play a pivotal role in designing, developing, and maintaining effective systems and processes within Manufacturing. This will involve the integration of digital technologies into all manufacturing processes, analysing production data, identify bottlenecks and implement digital solutions that enhance productivity and reduce costs.
The Industrial Engineer based in Oldham, Manchester, will ideally have experience across;
Understanding of Industry 4.0 within a manufacturing environment
Coding languages such as Python, .Net, C#
Lean manufacturing principles and continuous improvement methodologies such as Six Sigma
APPLY NOW, if this Industrial Engineer job in Oldham, Manchester sounds like the opportunity for you. Alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1309. If this job is not suitable but you are looking for a job within Manufacturing and Operations, please call 01582 878 848 for a confidential discussion.....Read more...
A Production Manager is urgently required for a new job in North London.
An exciting new job has arisen for a Production Manager, based in North London to work for an exciting start-up company specialising in the design and manufacture of high performance flat panel X-ray detectors and image sensors.
The Production Manager located in North London will hold responsibility for the cleanroom assembly of image sensors and detector assemblies used primarily in the medical and non-destructive test applications.
The ideal Production Manager, based in North London will have previous experience within a cleanroom manufacturing / production environment, ideally within image sensors, camera or semiconductor manufacturing. They will also need a good understanding of lean / continuous improvement activities such as six sigma methodologies.
APPLY NOW! For the Production Manager job, located North London by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878 848 quoting ref. THD1304. Otherwise, we always welcome the opportunity to discuss other roles similar to Design jobs on 01582 878 848 or 07961 158762.....Read more...
Technology and consulting service company is looking to expand their team with an Agile Delivery Manager. Managing the full project life cycle, setting standards for assignments and applications.
The main responsibilities of an Agile Delivery Manager include:
Work to educate clients on the emerging practices in relation to their specific industry and key business requirements
Manage multiple client engagements simultaneously
Work in partnership with the Management team, create the strategic plan and implement new processes and approaches to achieve it
Actively lead a successful team in line with the strategic plan
Guide and support the professional development of specialist team members
Leadership responsibility for provision of consulting services to corporate clients and achieving agreed objectives
For you to be the ideal Agile Delivery Manager candidate, you will:
Degree in Computer Science, Information Systems, or other related field, or equivalent work experience
Has achieved a formal certification as a Scrum Master, Kanban Lead, Lean Six Sigma certification or similar Agile approach
Knowledge of MS SharePoint
Proven evidence of Coaching skill development through experience
Actively involved in the Agile community through publications, speaking events or facilitating community events
Proven experience in leading multiple teams in agile software delivery approaches
Extensive experience with all stages of the product development lifecycle
If you think that you are suitable for this Agile Delivery Manager role, please apply now!....Read more...
Technology and consulting service company is looking to expand their team with an Agile Delivery Manager. Managing the full project life cycle, setting standards for assignments and applications.
The main responsibilities of an Agile Delivery Manager include:
Work to educate clients on the emerging practices in relation to their specific industry and key business requirements
Manage multiple client engagements simultaneously
Work in partnership with the Management team, create the strategic plan and implement new processes and approaches to achieve it
Actively lead a successful team in line with the strategic plan
Guide and support the professional development of specialist team members
Leadership responsibility for provision of consulting services to corporate clients and achieving agreed objectives
For you to be the ideal Agile Delivery Manager candidate, you will:
Degree in Computer Science, Information Systems, or other related field, or equivalent work experience
Has achieved a formal certification as a Scrum Master, Kanban Lead, Lean Six Sigma certification or similar Agile approach
Knowledge of MS SharePoint
Proven evidence of Coaching skill development through experience
Actively involved in the Agile community through publications, speaking events or facilitating community events
Proven experience in leading multiple teams in agile software delivery approaches
Extensive experience with all stages of the product development lifecycle
If you think that you are suitable for this Agile Delivery Manager role, please apply now!....Read more...
CONTINOUS IMPROVEMENT MANAGER - PERMANENT - SURREYA reputable biopharmaceutical client of ours are looking for a passionate Continuous Improvement Manager to drive operational excellence at their manufacturing site. Reporting directly to the Site Director and as part of the Senior Leadership Team, you’ll play a key role in shaping and implementing strategies to enhance performance across People, Safety, Quality, Delivery, and Cost.
What You’ll Do:
Lead high-impact continuous improvement projects and coach teams for sustainable success.
Analyze processes, identify improvement opportunities, and uncover root causes of inefficiencies.
Act as an internal consultant, developing and implementing long-term CI strategies.
Mentor teams and embed a culture of continuous improvement through training and development.
Collaborate globally to share insights and strengthen CI initiatives across sites.
What We’re Looking For:
Proven track record in a similar leadership role, ideally within the pharmaceutical industry.
Expertise in Lean or Six Sigma (Green Belt minimum), project management, and CI tools/methods.
Exceptional leadership and people development skills with the ability to navigate change.
Strategic thinker with outstanding organizational and communication skills.
Self-motivated, pragmatic, and innovative with a collaborative mindset.
STR Limited is acting as an Employment Agency in relation to this vacancy.....Read more...
My client is a world leader in specialised electronic technologies and they are looking for a Process Engineering & Facilities Manager based in Portchester, Hampshire to join their growing engineering team.
The Process Engineering & Facilities Manager based in Portchester, Hampshire will oversee the design, implementation, and optimisation of manufacturing processes. These will be to ensure production output and quality standards are achieved.
Other duties of the Process Engineering & Facilities Manager include
Lead the design, development, and optimization of manufacturing processes to improve efficiency, quality, and cost-effectiveness.
Analyse production workflows, identify bottlenecks, and implement process improvements.
Collaborate with production and engineering teams to ensure manufacturability of new products.
The Process Engineering & Facilities Manager, Portchester, Hampshire will have:
Lean / Six Sigma implementation experience
Team management of a highly skilled mix discipline team across Process Engineers and Facilities Engineers
Aerospace/defence experience preferred
Electronics manufacturing experience a significant advantage
APPLY NOW for the Process Engineering & Facilities Manager based in Portchester, Hampshire role please send your CV to TDrew@redlinegroup.Com quoting reference THD1140 or call Tom on 01582 878 848, if you have any specific questions about this role, otherwise we always welcome the opportunity to discuss other engineering jobs on 07961 158762.....Read more...
Manufacturing Engineer
I'm on the lookout for a Manufacturing Engineer to join a highly reputable and long established company within the Portsmouth area. The role of the Manufacturing Engineer is to implement new and improve existing production lines and processes in order to maximise efficiency's. You will be tasked to design, setup and develop these processes utilising lean principles to optimise productivity.
The client is owned by a globally recognised powerhouse, collectively they employ over 100,000 globally. As the Manufacturing Engineer there will be plenty of opportunities to learn and grow within the business too.
Manufacturing Engineer Role:
- To assist the Technician team in determining the correct TPM activities and schedules.
- To design, setup and develop production lines / processes utilising lean principles to optimise cell productivity.
- Review existing production Cells and implement changes to improve labour utilisation.
- Provide solutions / improvements to address HSE issues
- Provide support to the manufacturing Cells and drive continuous improvement through RCA.
- Provide technical / Process support to Engineering Technicians in support of RCA.
- To ensure that all new or modified processes, equipment and materials are introduced and used in accordance with UK Health and Safety regulations and Company Procedures.
- Ensuring timely completion of Kaizen ideas
- Be a key driver in our safety first culture
The successful Manufacturing Engineer:
- Ideally Degree Educated and/or Time served apprenticeship in Mechanical or Production Engineering.
- Minimum of 3 years experience in Manufacturing Engineering related support or suitable discipline.
- Proven Experience in managing projects is essential.
- Six Sigma Green Belt qualification (or practical application) is desirable.
- Hands on practical Engineering skills
- Demonstrable RCA problem solving skills.
How to apply for the Manufacturing Engineer Role:
Please apply for the vacancy. If you are interested in finding out more get in touch with Liam Nother on the below information:
Liam.Nother @holtengineering.co.uk....Read more...
Are you seeking an exciting Production Engineer job within an innovative and advanced technology company that’s based in Chelmsford, Essex? Do you have a keen interest in mechanical / production / test engineering?
As a Production Engineer you will play a pivotal role in the manufacturing process, ensuring the successful production of high-quality RF products. Your expertise will drive efficiency, optimise processes, and guarantee products meet stringent quality standards. You will collaborate closely with cross-functional teams, including design, manufacturing, and quality assurance, to deliver exceptional RF products to our customers in Medical, Marine, Industrial and Defence markets.
Key skills and experience for the Production Engineer role based in Chelmsford, Essex:
Bachelor’s Degree in Mechanical, Manufacturing, Electrical Engineering or similar. Alternatively, HNC and provable experience.
Engineering experience in a manufacturing environment.
Proficiency in process optimisation, root cause analysis, and quality control methodologies, such as 8D, Six Sigma.
Excellent problem-solving skills and the ability to work well under pressure.
We are looking for an ambitious individual who is excited by technology and innovation, who would like to join a team of fast-moving, dedicated, passionate and technical professionals focused on making a difference.
This Production Engineer job, based in Chelmsford, Essex is a fantastic opportunity to join a company who offer dynamic, challenging and exciting career opportunities and is commutable from Bishop’s Stortford, Braintree, Colchester, Southend-on-Sea, Brentwood, Ilford, Romford, Ipswich, Harlow, Enfield and Basildon.
For more information on this Production Engineer job in Chelmsford, Essex or to discuss similar jobs, please call Jamie-Lee Debenham on 01582 87 8807 or 07961158786. Alternatively you can email JDebenham@Redlinegroup.Com....Read more...
This Process Engineer position is with a globally leading chemical manufacturing company that are investing heavily on their site over the next 2-3 years. Multiple multi-million pound projects have and are continuing to be sanctioned to provide upgrades and renovations on the site.Taking this opportunity as Process Engineer would mean working for a leading global producer of chemical products. This is a key manufacturing company relied on by many industries and this Process Engineer role is critical to ongoing operation.Responsibilities of the Process Engineer;
Support Operations Leader in defining the weekly maintenance priorities minimising impact in product commitments.
Understand OEE losses and propose improvement plan in conjunction with operative team. Implement OEE tools to capture losses in real time. Support developing improvement plant to improve site capacity.
Day to day trouble shooting support, mainly related to software and technical / quality issues. Day to day responsibility for providing technical expertise and diagnosing and solving problems (initiate MOC and RCA if required).
Implement Lean Six Sigma tools.
Engaging in a professional development programme to support with progression through the company.
To be successful in this position as Process Engineer, an established technical background with experience in a production or operations environment on a chemical site (ideally COMAH site) within is required. The minimum qualification for this role is a Chemical Process Engineering degree or equivalent and 5-10 years’ experience.Working for this multi-billion-pound market leading company as an Process Engineer means receiving a comprehensive benefits package alongside salary. This includes a double figure pension, annual bonus, health care scheme and life assurance amongst others. In addition to this 28-day annual leave plus bank holidays. Progression is a genuine opportunity with this company given their ambitious but stable growth and investment strategy.Please apply directly for further information regarding this Process Engineer role....Read more...
An exciting job opportunity has arisen for a Quality Engineer to join a globally recognised organisation involved within the exciting technology sector of Rugged and Industrial Computers and Integrated Systems, based at their site in Tewkesbury, Gloucestershire.
Due to continued growth my client in Tewkesbury, Gloucestershire is seeking a Quality Engineer to join the Quality team to ensure that products and processes are maintained in line with Business and Customer requirements
Duties of the Quality Engineer job include:
Implementation and management of inspection and certification control plans
In process production part approval using visual and dimensional inspection
Final inspection of completed components or assemblies including signoff.
Manufacturing support to the production areas with reference to quality issues
Ensuring procedures are implemented or updated where appropriate.
Actively support the business with QMS to ISO 9001:2015 certification
Key skills and experience for the Quality Engineer job are:
Previous work experience as a Quality Engineer or similar role, ideally in electronics based product manufacturing environment
In-depth understanding of technical documentation including Engineering drawings
Ability to compose clear and concise reports & documentation
Internal Quality auditing experience to ISO 9001:2015
Experience of quality processes with the Defence industry
Six Sigma experience
Hold UK SC Clearance or have the ability to pass SC Clearance
This is an exciting job opportunity for a Quality Engineer to progress their career with a financially strong progressive mid-sized electronics company that is part of a global group.
To apply for the Quality Engineer job based in Tewkesbury, Gloucestershire please send your CV and covering letter to RWilcocks@redlinegroup.Com or for more information contact Ricky Wilcocks on 01582 878810 or 07931788834.....Read more...
