You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high-quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling. Maintain a clean working environment.
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship.
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
During the apprenticeship, you will become proficient in reading and interpreting CAD drawings, planning your work with the right tools, equipment and resources to complete the task. You will develop your problem-solving and fault diagnosis skills alongside following the high quality, health and safety standards in place.
Following the completion of the Level 3 Engineering Fitter Apprenticeship the successful candidate will provide the necessary technical expertise and support in relation to assembly of control system activities, whilst meeting agreed production quantity and quality targets in a safe manner.
Initially you will prepare and assemble components ie.,
Interpretation of diagrams
Measuring, labelling, marking out panels,
Drilling and fitting plates to wire control panels in our workshop
You will possess a positive attitude towards self development both practically and academically, ability to work within a small supportive team, be conscientious, with good timekeeping skills and have a desire to achieve high standards of customer satisfaction.
As the role progresses you will become involved in testing, use of power tools and have the opportunity to see the job through by assisting on customer sites around the UK, with installation and commissioning.
You will be trained to read and interpret engineering data, worksheets and drawings in addition to working to documentation such as method statements, HS&E requirements to ensure safe systems of work.
Throughout your role, you will have interaction with all levels of staff from management, engineering, finance and admin to shop floor, allowing you to build your confidence and understanding in how a business operates.Training:https://www.instituteforapprenticeships.org/apprenticeship-standards/engineering-fitter-v1-3
Training will be delivered one day per week, term time, and is based at The Highfield site and facilities are in creation to enrich the student experience, developing them with the necessary skills using industry recognised equipment to ensure the apprentice receives training closely matched to the employer’s and industry.Training Outcome:Initially working as an apprentice learning the skills in our workshop and in College. Following successful completion of the apprenticeship there could be the opportunity to gain further qualifications, in a supportive environment.
The further qualifications are dependent upon the route both the candidate and the business see their career going. Once the apprentice becomes experienced in the role, in addition to undertaking work in our workshop, they will have the opportunity to work alongside qualified engineers in onsite installation and commissioning. Further career progression into hardware and software engineers could be a possibility, if so desired.Employer Description:Initially established in 2002, Actemium Automation Nottingham are a leading player within the engineering sector. Since 2015 we have been part of the VINCI Energies network of businesses, comprising of 20,000 engineers & technicians within 350 local business units across 40 countries worldwide. We support a number of leading blue-chip companies throughout the UK. Our range of services cover essential automation such as control panel design and construction, and we have formed strong partnerships with our customers, which include – Toyota, Rolls Royce, Nestle - in delivering products to market. Premised are based in Nottingham close to the M1 & East Midlands Airport.Working Hours :37.5 hours per week Mon-Thursday (07.00 - 15.30) with 30 minutes for lunch. Friday (07.00 - 12.30).
Total hours per week: 37.5 hours a week.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
The role of a Planning & Design Trainee involves detailed technical discussions with customers, architects, public authorities and landowners together with a sound and pragmatic appreciation of complex engineering problems. Applicants must be personable and approachable, with a firm understanding of engineering and financial matters.
The training programme provides on-the-job training and formal courses held in one of our Training Centres at either Taunton or Tipton, over a period of approximately two years (depending on entry level qualifications). Successful candidates will also be expected to study for and achieve a higher-level qualification. The majority of the on-the-job training will take place within local teams, but you may be required to undertake placements at other locations across the National Grid service area, so you need to be flexible and able to travel.
The apprenticeship programme takes approximately three years to complete, and you’ll spend your first 10-12 weeks being inducted onto the programme at one of our Training Centres. You’ll earn while you learn and develop your knowledge, skills and behaviours to become a Networks Planner, achieving a higher-level qualification. will include vocational and academic courses along with periods of on-the-job training and development, learning from an experienced and qualified Network Planner. Following a formal assessment of your knowledge, skills and behaviours, you’ll become a qualified Network Planner yourself.
As you will be studying for a higher-level qualification, you will be required to undertake placements with your training provider for up to two weeks at a time during the first two years. Accommodation and travel costs will be provided.
In this role you will:
Be responsible for the design, costing and quoting of projects
Learning about the replacement, diversion of electricity assets
Reinforce existing electricity network assets.
ou'll become integral to the company offering many benefits who offer a supportive working environment, providing you the skills to make robust decisions and successfully deliver essential works. We are committed to investing in the latest technologies and working methods to improve service to customers. Ready to power up your career?Training Outcome:
You’ll become a qualified Network Planning & Design Engineer
Employer Description:We’re National Grid Electricity Distribution (NGED), the owner and operator behind the electricity distribution systems for the Midlands, the Southwest of England and South Wales. Serving communities of more than 8 million people, our expert teams deliver heat, light and power for homes and businesses, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts.
Net-zero targets are transforming the way we work and increasing the scope of the positive impact we can make. Right now, we’re looking for apprentices to join us.
Our people in Network Services work across a number of teams to keep the lights on for our customers. They might be helping a customer who has lost supply or supporting a developer building a multi-million pound project.
They maintain a 24/7 service from faults and maintenance, asset replacement to new connections, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts, their work is critical to everything we do.Working Hours :Monday to Friday
9am- 5:30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Adventurous,Safety awareness,Resilient....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks, and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day, you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. Once you’ve completed your Intermediate Apprenticeship, there are plenty more options available to you, including studying at a higher level.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis.
The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:
On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level
Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option
If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship
Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
JOB DESCRIPTION
Summary:
Carboline Global, Inc is seeking a Credit Intern. This individual will be given meaningful and challenging assignments during a 10-week summer program. This is a unique opportunity to gain experience and industry knowledge through summer project work in the credit department, while also developing professionally through networking with peers, mentors, and senior leaders at our Corporate Headquarters.
Minimum Requirements:
This paid intern will work roughly 30 - 40 hours per week from May-August. Strong Academics record from an accredited university and pursuing a degree in Finance or a similar field. *Students must have housing arrangements in or near St. Louis for the summer, as housing allowance is not provided.
Physical Requirements:
This position requires minimal physical activity but does require computer usage for an extended period of time - up to 8 hours in a day. No unusual environmental, lifting or exertion requirements are associated with this position.
Essential Functions:
Primary responsibilities include but are not limited to: Strong and consistent verbal, written, and listening communication skills: ability to articulate in a clear and concise manner. High level of curiosity to learn and adapt. Strong computer skills, and proficiency, with Microsoft Excel and Word. Collaborative, results-oriented, and ability to work across teams independently, maintaining objectivity and delivering results. Intellectually curious with ability to think critically, creatively, and identify/explore alternatives. Collaborate and work in a dynamic team environment, including with employees outside the assigned home office. Reconcile customers' accounts timely to keep customers accounts up to date. Request and review bank/trade references, Dun & Bradstreet credit reports, and if necessary financial statements. Set credit limit or submit to proper authorized person for credit limit approval. Contact customers whose accounts are past due, according to the "aging report". Follow up with past due customers regularly. Perform additional duties as assigned. Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
JOB DESCRIPTION
Title: Sales Representative
Who We Are:
Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
Responsible for selling all of the assigned company products/services within the assigned sales territory by contacting established customers as well as developing new prospects. Must have complete knowledge of the product line represented, related services and company policies.
Essential Functions:
Responsible for calling on new and existing customers to build sales volume, remain abreast of customer requirements, and assess market trends. Calls on customers and prospective customers to inform them of products, new releases, services available, supply, etc. Provides technical assistance when necessary. Responsible for securing and renewing orders; works with customer services and sales management to provide servicing levels required by the customer. Builds and maintains a sales program within the territory based on strategic planning including prospecting, new business development, levels of available business, and level of repeat business. Works effectively with all company personnel and resources to provide full customer service and assure continuing customer satisfaction. Applies good judgment and prompt follow-through on customer complaints, returns, claims, or other problems on products/services provided. Gathers and reports significant developments within accounts, prospects competitors, and the general market for use by company management in research, analysis, and planning purposes. Ability to work independently with minimal supervision. Provides annual sales detailing target markets and accounts. May act as a Field Technical Service Engineer as requested. Perform additional duties as assigned. Commit to the Company's safety and quality programs.
Requirements:
Bachelor's in Business or a Technical degree or equivalent experience. Minimum 1 year of individual sales experience. Preferred: Previous industrial sales experience within the coatings industry. Must have a valid Driver's License.
Physical Requirements:
This position requires minimal physical activity. May require lifting up to 50lbs on occasion. May require computer usage for an extended period of time - up to 8 hours a day. Occasional exposure to various chemicals. May require travel up to 50%, including nighttime.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online!....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling . Maintain a clean working environment.
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship.
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
Carry out daily room checks and report any issues to the management team.
Adhere to all policies and procedures, keeping up to date with any changes.
Ensure all visitors comply with the nursery’s policies and procedures at all times.
Report any changes in a child’s behaviour or appearance to the manager, especially those that may concern the child’s health, welfare, or development.
Take responsibility for the children in your group, ensuring individual care and attention with regard to their physical, intellectual, cultural, emotional, and religious needs.
Provide quality daycare for children aged 0–8 years, respecting their abilities, ethnic, cultural, and religious backgrounds.
Promote a sense of identity and self-worth in each child by being sensitive to their ethnic, cultural, and religious backgrounds, as outlined in the equality and diversity policy.
Create a varied and stimulating program of activities to encourage children’s development, completing weekly planning in line with the Early Years Foundation Stage (EYFS).
Evaluate weekly plans to align with the EYFS standards.
Regularly monitor and record each child’s development progress, identifying areas needing additional support.
Ensure children’s records are consistently up to date.
Participate in staff appraisals, parent/carer evenings, staff meetings, training sessions, and professional meetings concerning children, even outside of regular working hours.
Develop strong relationships with parents/carers and work in partnership with them to ensure the children’s safety and well-being.
Be aware of your roles and responsibilities, following correct routines and procedures.
Maintain high cleanliness standards, participating in cleaning rotas.
Communicate confidently and effectively with parents/carers, children, staff, proprietors, visitors, and external agencies.
Understand and abide by the confidentiality policy, signing a confidentiality agreement.
Be punctual, reliable, flexible, and ready to work as per your rota.
Display a friendly, fair, and approachable manner at all times.
Provide cover at the sister nursery as required, for both short-term and long-term periods.
Perform any other duties and responsibilities necessary for the efficient running of the nursery.
Training:
You will work towards your Level 3 Early Years Educator qualification across a total duration of 18 months!
Training provider: LMP Group: https://lmp-group.co.uk/
All online/remote learning, no classroom or college day release.
An allocated tutor will support you throughout the apprenticeship!
Training Outcome:
Future opportunities for progression.
Employer Description:Humpty Dumpty's Day Nursery in Rowley Regis is a warm and welcoming childcare center dedicated to providing a nurturing and stimulating environment for children aged 0 to 8 years. The nursery focuses on delivering high-quality early years education in line with the Early Years Foundation Stage (EYFS) framework, ensuring every child receives personalized care and attention. With experienced and compassionate staff, the nursery fosters a safe space where children can develop their physical, emotional, and cognitive skills through a variety of creative and engaging activities. Humpty Dumpty's Day Nursery is committed to inclusivity, celebrating diversity, and promoting the well-being and happiness of every child in its care.Working Hours :Monday to Friday, 37.5 hrs per week, shifts to be confirmed at interviewSkills: Communication skills,Attention to detail,Organisation skills,Team working,Creative,Non judgemental,Patience....Read more...
As part of a Port Task Group, load and unload vessels to meet port deadlines and operational commitments. You'll also learn how to operate cranes mechanical equipment to load and unload pallets, containers and other cargo.
Primarily based at the home of Army Maritime in Marchwood, Southampton.
You could be deployed worldwide– wherever the British Army has a presence.
Gain your Category C+E Driving Licence and learn how to use equipment such as an Industrial Forklift and cranes.
Gain MHE qualifications and a Level 2 Port Operative Apprenticeship.
Training:Step 1 - You'll start with your initial military training which will teach you how to be a soldier - this will cover everything from fieldcraft to handling a rifle. If you join as a Junior Soldier (under 17 years and 6 months), you’ll do a 23-week basic military training course at Harrogate. If you join as a Regular Soldier (over 17 years and 6 months), you’ll do the regular 14-week adult basic training.
Step 2 - Next, you will undertake your 15-week Combat Logistician course at the Defence School of Transport in Leconfield. During this, you will earn your Category C+E Driving Licence and study general service driver modules. This training also gives you the opportunity to gain a broader knowledge on the Royal Logistic Corps functions and roles.
Step 3 - Then you’ll complete the Port Operator Class 3 course where you will learn the safety aspects of working in a hazardous port environment and gain your MHE Licences. You’ll also learn how to transfer cargo between military and civilian transport using cranes and other equipment.
On promotion, and after earning two further MHE Specialist Qualifications, you will begin the Port Operator Class 2 course. Later on, you will complete the Port Operator Class 1 course which includes learning how to be a Crane Supervisor.
Qualifications you could get after training:
Level 2 Port Operative Apprenticeship
MHE Qualifications
Functional skills
CMI Diploma
ILM award in Leadership and management
Training Outcome:The apprenticeship is a gateway to a full-time career in the British Army. Promotion, along with increased salary and responsibility is dependent on successful completion of the apprenticeship and then on merit by competitive selection. As you advance through the ranks, you will have the increased opportunity to lead and direct people, managing resources and workforce within your area of work to deliver the required outputs whilst maintaining and instilling the highest values and standards expected of the British Army. You belong here.Employer Description:Protecting the nation and its dependent territories will always be the British Army's first role. Highly trained soldiers are ready to deploy anywhere at any time to meet a variety of challenges, ranging from support to the Police following a terrorist attack, to specialist capabilities such as bomb disposal and intelligence experts, 24 hours a day 365 days a year, we are always ready to serve. You belong here.Working Hours :Shift and working patterns may vary. Working locations will vary nationally depending on the apprenticeship and working requirements. Days and times to be confirmed.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Team Manager
Salary: £31,104 total package - (£28,704 per annum salary + £200 per month car allowance)
Location: STOKE ON TRENT
Do you have an interest in Retail?
Are you looking for a role where you will be involved in high profile projects for some of the UK’s leading grocery supermarket’s & DIY chains. We have salaried Team Manager opportunities where you will be working on New Stores, Refits, Range Reviews and Store Support Projects. You will be able to work at a fast pace, making quick decisions leading teams merchandising stock to an excellent standard.
The Role
A typical week consists of 48hrs Sunday to Thursday.
You will be leading and supporting a team of merchandisers and replenishers carrying out tasks required by the client.
Communicate with management on progress and end of project sign off.
Carry out health and safety inductions and checks.
Shift lengths are generally 12 hours, days and nights (predominately nights). Access to available assignments will be on your smartphone via our Field Power platform where you can set your availability and accept shifts.
You will be required to clock in and out using your smart phone via our RAS Dashboard.
Work will be carried out on different retail customer sites / stores and travel will vary on a shift-by-shift basis.
You will be required to carry out the following:
Removing and replacing stock with the use of client plans and systems.
Adjusting shelf heights.
Moving stock from the warehouse onto the shop floor, with use of roll cages and pallet trucks.
Stock replenishment.
Travelling will be involved when local work is not available. Accommodation will be provided when required to stay away.
Desirable Qualities:
Excellent communication skills.
Able to make decisions and prioritise.
Previous experience in Merchandising, Retail Supervision or managing people.
Methodical approach and keen attention to detail.
Manual handling and heavy lifting will be involved.
Problem solving and a ‘can do’ attitude.
Due to the nature of our work, you must be able to work unsociable hours, including early mornings and during the night when required. As a result, we can only accept applicants 18 years and over.
Benefits include:
Car allowance.
Holiday entitlement.
Pension scheme.
Uniform provided.
Accommodation when required.
Progression opportunities.
Recognition, awards and incentives.
RAS (Retail Asset Solutions) is the largest nationwide retail support company providing Merchandising, Stock taking and Supply chain audit services. Your future career development is in your hands!
This role is being handled by Retail & Asset Solutions (RAS). To discuss this vacancy or any other great positions we have please call us on 01689 879444 for a confidential chat about working for our business.
By applying to this role, you are consenting to Retail & Asset Solutions to hold and process your data in compliance with the General Data Protection Regulations. If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data then please contact us at applications@retailassetsolutions.com and we will respond to your query as soon as possible.
....Read more...
Full job description
Engineering Planner
Location: Park Royal, Middlesex
Salary to £55K plus benefits
As a Maintenance Planner, you will be responsible for developing and overseeing the maintenance schedules for all production equipment and facilities to ensure optimal performance and minimal downtime. Your role will involve coordinating with the maintenance team to plan preventive maintenance activities, track maintenance tasks, and manage inventory of spare parts. You will also analyse equipment performance data to identify trends and recommend improvements. Your organisational skills, attention to detail, and ability to work collaboratively with various departments will be essential in maintaining the high operational standards.
How you can help us:
Work with the Engineering Manager to deliver all elements within the Engineering Plan.
Ensure all assets are maintained to minimum legal standard and meet insurance requirements, (lifting equipment, pressure systems and LEV).
Implement an effective Engineering Planning System that maximises utilisation of resources.
Produce a weekly engineering schedule to ensure maintenance is executed to the highest of standards and delivers asset reliability. Spends time on the plant to ensure engineering work is planned and estimated within cost and delivers value for money maintenance.
Co-ordinate modular overhaul activities and produce agreed plans.
Schedule a balanced PM system to deliver agreed engineering KPI’s.
Measure and publish engineering KPI’s weekly, including regular reporting
Implement the groups chosen computerised maintenance management system.
Develop asset block diagrams that support the effective use of the CMMS and PPM schedules.
Develop a unit structure to support spares management, track asset costs & equipment reliability.
Manage, track and report engineering spend, Match invoices, delivery notes
Support Site Engineering Team to resolve day to day engineering issues across the site.
Support the delivery and cascade of site objectives to engineering team.
Ensure engineering spares and inventory are catalogued and available to support asset reliability.
Implement an effective engineering stores management system to ensure critical spares are always available.
Manage engineering contractors and their activities whilst on site through effective use of Contractor Control Procedure.
Participate in training and development of self and engineering team.
Build and maintain effective relationships with all site contacts from operators, engineers, site management, suppliers etc.
Support Continuous Improvement plans / activities.
What we would like you to bring to our team:
Electrical and/or mechanical qualifications / time served apprenticeship
Experience of operating in a medium/large automated manufacturing operation with relevant safety systems, quality standards, housekeeping standards etc.
Experience of leading a team of engineers, managing workloads, prioritising activities and reviewing work is desirable.
Experience of computerised maintenance management systems (CMMS)
Experience of spares management systems would be an advantage
Experience of working with PLCs, servo drives, pneumatics, hydraulics, welding
Some experience of continuous improvement/lean manufacturing techniques e.g. DMAIC, would be an advantage.
Contact Information:Please apply below or Contact Aash on 01923 227 543 alternatively you can send your CV to Maintenance Engineer, Electrical Maintenance Engineer, Food, Manufacturing, FMCG, North London, London.
....Read more...
As Bar and Waiting Staff at Ember Inns you are the personality behind the beer pumps, the expert on the drink's menu and know our food menu inside out, frequently recommending your favourites. As the friendly face our guests remember, you'll inject your personality every moment you're with our guests so that they love to come back time and time again.
Responsibilities:
Greet, serve and look after our guests
Maintain the highest standards of cleanliness and safety
Work with the team to create a friendly atmosphere our guests will love
Know the menus inside out, making recommendations to our guests
Be a champion of brand standards
You don't even need any experience. So long as you can provide a warm, helpful manner to everyone you meet, we can teach you the ins and outs of working as part of our busy teams.
By taking on a full-time role as a bar and waiting apprentice under the supervision of our passionate teams, not only will you achieve a Level 2 Hospitality Team Member Apprenticeship, you will be able to support the running of our businesses, creating some amazing moments!
What your apprenticeship includes:
A mixture of face to face and skype/phone catch ups every 4 - 6 week
A mixture of on and off the job training, including workshops and webinars
Reviews every 12 weeks with the Apprentice, Line Manager and Lifetime Trainer
Feedback sessions to discuss progress
Obtain Functional Skills in English and Maths (if you don't already have GCSE)
30 hours paid work every week
Benefits for M&B staff:
Love eating out? You'll love it even more with a massive 33% discount across all our brands. Whether its date night at Miller & Carter or family roast at Toby Carvery, we've got you covered.
Never a dull moment - fun, laughs and lifelong friends!
Funded qualification up to degree level
Charity is important to us. From the company charities to the one which is close to your heart; you can choose how to give something back.
Enjoy a 33% discount off a cosy stay at our Inn Keepers Lodges.
On top of all this, we offer a pension; 28 days paid holiday; high-street shopping discounts; and we even give you free shares!
Wage will be:
16-20 year olds: £8.60 per hour
21+ year olds: £11.44 per hour
At Mitchells and Butlers you will be working towards a Level 2 Food and Beverage Hospitality Apprenticeship standard over the course of 15 months.Training:
Hospitality Team Member Apprenticeship - Food and Beverage Service Level 2 including Functional Skills in Maths and English.
Training Outcome:
Ongoing support and development.
Employer Description:You already know Mitchells & Butlers, even if you don't realise it! That's because we run many of the UK's most famous restaurant and pub brands, including: All Bar One, Sizzling Pubs, Vintage Inns, Harvester, Ember Inns, Toby Carvery, Crown Carveries, Castle, Nicholson's, Premium Country Dining Group, O'Neill's, Alex, Village Pub & Kitchen, Miller & Carter, Browns, Innkeeper's Lodge, Orchid Pubs and The Oak Tree.Working Hours :Shift work including bank holidays, evenings and weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills....Read more...
The role of a Planning & Design Trainee involves detailed technical discussions with customers, architects, public authorities and landowners together with a sound and pragmatic appreciation of complex engineering problems. Applicants must be personable and approachable, with a firm understanding of engineering and financial matters.
The training programme provides on-the-job training and formal courses held in one of our Training Centres at either Taunton or Tipton, over a period of approximately two years (depending on entry level qualifications). Successful candidates will also be expected to study for and achieve a higher-level qualification. The majority of the on-the-job training will take place within local teams, but you may be required to undertake placements at other locations across the National Grid service area, so you need to be flexible and able to travel.
The apprenticeship programme takes approximately three years to complete, and you’ll spend your first 10-12 weeks being inducted onto the programme at one of our Training Centres. You’ll earn while you learn and develop your knowledge, skills and behaviours to become a Networks Planner, achieving a higher-level qualification. will include vocational and academic courses along with periods of on-the-job training and development, learning from an experienced and qualified Network Planner. Following a formal assessment of your knowledge, skills and behaviours, you’ll become a qualified Network Planner yourself.
As you will be studying for a higher-level qualification, you will be required to undertake placements with your training provider for up to two weeks at a time during the first two years. Accommodation and travel costs will be provided.
In this role you will:
Be responsible for the design, costing and quoting of projects
Learning about the replacement, diversion of electricity assets
Reinforce existing electricity network assets.
ou'll become integral to the company offering many benefits who offer a supportive working environment, providing you the skills to make robust decisions and successfully deliver essential works. We are committed to investing in the latest technologies and working methods to improve service to customers. Ready to power up your career?Training Outcome:
You’ll become a qualified Network Planning & Design Engineer
Employer Description:We’re National Grid Electricity Distribution (NGED), the owner and operator behind the electricity distribution systems for the Midlands, the Southwest of England and South Wales. Serving communities of more than 8 million people, our expert teams deliver heat, light and power for homes and businesses, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts.
Net-zero targets are transforming the way we work and increasing the scope of the positive impact we can make. Right now, we’re looking for apprentices to join us.
Our people in Network Services work across a number of teams to keep the lights on for our customers. They might be helping a customer who has lost supply or supporting a developer building a multi-million pound project.
They maintain a 24/7 service from faults and maintenance, asset replacement to new connections, working outdoors with underground cables, overhead lines and substations that operate between 230 and 132,000 volts, their work is critical to everything we do.Working Hours :Monday to Friday
9am- 5:30pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Adventurous,Safety awareness,Resilient....Read more...
As Bar and Waiting Staff at Stonehouse you are the personality behind the beer pumps, the expert on the drink's menu and know our food menu inside out, frequently recommending your favourites. As the friendly face our guests remember, you'll inject your personality every moment you're with our guests so that they love to come back time and time again.
Responsibilities:
Greet, serve and look after our guests
Maintain the highest standards of cleanliness and safety
Work with the team to create a friendly atmosphere our guests will love
Know the menus inside out, making recommendations to our guests
Be a champion of brand standards
You don't even need any experience. So long as you can provide a warm, helpful manner to everyone you meet, we can teach you the ins and outs of working as part of our busy teams.
By taking on a full-time role as a bar and waiting apprentice under the supervision of our passionate teams, not only will you achieve a Level 2 Hospitality Team Member Apprenticeship, you will be able to support the running of our businesses, creating some amazing moments!
What your apprenticeship includes:
A mixture of face to face and skype/phone catch ups every 4 - 6 weeks
A mixture of on and off the job training, including workshops and webinars
Reviews every 12 weeks with the Apprentice, Line Manager and Lifetime Trainer
Feedback sessions to discuss progress
Obtain Functional Skills in English and maths (if you don't already have GCSE)
30 hours paid work every week
Benefits for M&B Staff:
Love eating out? You'll love it even more with a massive 33% discount across all our brands. Whether its date night at Miller & Carter or family roast at Toby Carvery, we've got you covered
Never a dull moment - fun, laughs and lifelong friends
Funded qualification up to degree level
Charity is important to us. From the company charities to the one which is close to your heart; you can choose how to give something back
Enjoy a 33% discount off a cosy stay at our Inn Keepers Lodges
On top of all this, we offer a pension; 28 days paid holiday; high-street shopping discounts; and we even give you free shares
Wage will be:
16-20 year olds: £8.60 per hour
21+ year olds: £11.44 per hour
At Mitchells and Butlers you will be working towards a Hospitality Team Member Level 2 Apprenticeship standard over the course of 15 months.Training:
Hospitality Team Member Apprenticeship - Food and Beverage Service Level 2 including Functional Skills in maths and English
Training Outcome:
Ongoing support and development
Employer Description:You already know Mitchells & Butlers, even if you don't realise it! That's because we run many of the UK's most famous restaurant and pub brands, including: All Bar One, Sizzling Pubs, Vintage Inns, Harvester, Ember Inns, Toby Carvery, Crown Carveries, Castle, Nicholson's, Premium Country Dining Group, O'Neill's, Alex, Village Pub & Kitchen, Miller & Carter, Browns, Innkeeper's Lodge, Orchid Pubs and The Oak Tree.Working Hours :Shift work including bank holidays, evenings and weekends. Exact shifts to be confirmed.Skills: Team Working,Organisation Skills....Read more...
Please note: This role involves poolside duties, and you must be a strong swimmer to be considered for an interview. A swim test will be required at the interview stage - details are at the end of this job description.
Everyone Active is a leading UK Leisure Provider and are recruiting Apprenticeships in Leisure Team Member roles, to start a career in the Leisure Industry.
Progression within the company is a core value, and on completion of your apprenticeship you will have plenty of opportunities to progress and develop within the company.
We're looking for enthusiastic people with a willingness to learn who can help achieve our mission of getting our customers to be active 30 minutes a day 5 times a week.
The Leisure Team Member Apprenticeship is a great opportunity to begin your career in the Leisure Industry. As part of your apprenticeship you will gain your National Pool lifeguard Qualification along with other nationally recognized qualifications in Leisure.
As part of the 18-month programme you will gain the following qualifications;
- National Pool Lifeguard
- Level 2 Gym Instructing
- Level 1 Assistant Swim Teaching
- Level 2 Swim Teaching
Your day to day duties with consist of working to ensure the full operations of a Leisure Centre and maintaining all of the required set standards across the organisation. You will be trained to safely operate the pool as part of a team and ensure the safety of the public. As part of your role you will learn and develop all the skills required to operate the different leisure facilities and activities such as swim and fitness provision. Please be aware, this will also include working on the Reception Desk when required.
This is an exciting opportunity for any candidate who has a drive and commitment to develop a career in the leisure industry. A candidate who is keen to learn and become a valued member of the team with flexible skills and attributes to develop into the future.
This is a full-time position and you will be required to work on a shift basis at your designated centre. You will be employed on a fixed term contract.
If you are invited to interview for this role you will be required to complete a swim test as part of the interview process, in order to be considered for the role you must be able to demonstrate you are able to do the following:
- Jump/dive into deep water
- Swim 50 metres in no more than 60 seconds
- Swim 100 metres continuously on front and back in deep water and then tread water for 30 seconds
- Surface dive to floor of pool (deepest part)
- Climb out unaided without ladders/steps
With Everyone Active you will be studying towards your Leisure Team Member Apprenticeship Level 2 Standard over the course of 15 months.Training:
Leisure Team Member Apprenticeship L2 including Functional Skills in Maths and English
Training Outcome:Potential Progression to Team Leader and then onto Duty Management training.Employer Description:Sports and Leisure Management Limited (SLM Ltd) is the company behind the Everyone Active brand. The Company is the longest established leisure contractor in the UK having been formed in 1987 by our CEO Stephen Hulme. The Company has seen significant growth over the years and currently manages 93 sports, leisure and cultural facilities in partnership with 34 Local Authority clients.Working Hours :40 Hours Per Week - Exact Shifts To Be Confirmed - Including Early Mornings, Evenings And WeekendsSkills: Team Working,Organisation Skills....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Bricklayer and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Understand the principles of high-quality customer service and communication to enable you to gain and keep a valued reputation in industry with clients, colleagues and industry representatives such as suppliers and manufacturers
Understand the different eras, types of construction methods, insulation considerations, sustainability, facilities management, fire, moisture and air protection, fireplaces and chimneys, damp proof courses and the use of brick ties
Set out and build brickwork, including complex arches and surrounding brickwork, curved on plan, concave and convex brickwork and battered brickwork
Select appropriate tools, equipment and materials (eg trowel, levels, brick ties, DPC, insulation, mixers, lintels etc) for use when setting out and erecting masonry walling. Maintain a clean working environment.
Select materials and resources to be able to set out and lay concrete, drainage and other substructure materials
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship.
Attendance at York College on a block release basis. The qualification achieved will be Bricklayer apprenticeship level 2.
Functional Skills in maths and English to be provided, if required.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8am and 5pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain manual tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use manual and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2. If necessary, this will include Functional Skills in English and maths.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
Main Duties and Responsibilities:
Supporting teachers and students during practical work, to include setting up demonstrations and equipment, providing guidance to pupils in the development of their tasks, including the safe operation and demonstration of equipment
To assist with overseeing the work of small groups of students engaged in practical tasks, as requested by the PE coordinator/lead and under the supervision of the classroom teacher
Day-to-day support of lessons including preparing equipment, materials and teaching aids
Tidying and cleaning after use if required owing to relevant COVID situation
To support with efficient organisation of the work and storage areas and to ensure the cleanliness, safety and security of these areas at all times
To assist with the delivery of extra curriculum/lunchtime activities
Supporting with classroom activities in the morning
Where appropriate for the above activities support staff with:
Preparation of equipment, materials and rooms: setting out of equipment, organising team kits and transport for fixtures and curriculum activities
Working as a team member within your school and gaining invaluable experience
Training:
Teaching Assistant Level 3 - Apprenticeship Standard (A level)
Depending on area, you will be assigned a tutor and training will be blended - involving both virtual and face to face
Training will be weekly and, Off the job training hours will be logged
You will be working with an E-portfolio (BUD System) and alongside your tutor you will be assigned a mentor from within your workplace
Following a successful Gateway meeting you will move forwards for an End Point Assessment - Upon successful completion of the EPA you will achieve a Level 3 Teaching Assistant Apprenticeship
Functional skills if required
Your tutor will visit for observations in the workplace
Training Outcome:
Level 4 Sports coach in a school setting
Higher education pathway
Teaching assistant
Pathway into teaching
Working in a sector that involves, initiative, leadership, communication, developing positive relationships.
Transferable skills that are invaluable in the wider world of work.Employer Description:To ensure that every child in our care is happy at school, thrives in our school environment and builds knowledge and understanding of core Christian values to help underpin the whole of their future life. Our vision to lay the foundations for life through encouraging one another and building each other up in our daily life at school.
At both of our schools you will find committed, experienced teaching and support staff ready to welcome your child at whatever stage of their education journey they are currently on. We are pleased to also offer specialist teaching in PE, music and art as well as a wide range of additional activities. Children can join the federation aged 2 at Albury and then from 3 at Puller and at both school sites can stay with us until they are 11.
Please do not hesitate to get in touch if you would like to find out more.
Amanda Hopwood
Executive HeadteacherWorking Hours :Monday - Friday, shifts TBC.
Working hours to be confirmed
Wage to be discussed at interviewSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Team working,Creative,Initiative....Read more...
You’ll learn both on the job and during intensive residential training weeks at college. All accommodation, travel and subsistence is paid for during the block weeks and you’ll start off with three weeks in college, returning home each weekend. This will prepare you to fully contribute as soon as you get on site.
You will then return to college approximately every 20 weeks, for a two-week block of intensive training.
During your apprenticeship, you will be expected to complete the Barratt Redrow Training Manual along with your site and college work within agreed time limits and standards. You will need to be consistent at gathering quality work-based evidence, work with your colleagues to learn and develop your trade skills and communicate politely with lecturers, customers and colleagues.
On a typical day you will be required to:
Safely use and maintain hand tools
Safely use and maintain portable power tools
Safely use and maintain other equipment
Training:This apprenticeship will give you the knowledge, skills and behaviours required to work as a Site Carpenter and will include the following:
Health and safety to include Control of Substances Hazardous to Health, Manual Handling and Working at Height Regulations, use of PPE etc.
Principles of building construction terminology and components, Building Information Modelling (BIM) and environmental and sustainability considerations
Interpreting and producing relevant information from drawings, specifications and work instructions including the basic principles of Computer Aided Design (CAD)
Understand the characteristics, quality, uses, sustainability, limitations and defects associated with timber and timber-based products and components
How to use hand and power tools including portable circular saws, drills, saws, planers, routers, sanders, multi-functional tools and nail guns
How to carry out first fixing work including timber frames and linings, timber coverings, flat roof decking, timber stud partitions, straight flights of stairs and installing handrails and spindles to straight flights of stairs
How to carry out second fixing work including installation of service encasements, cladding, wall and floor units, mouldings, side hung doors and ironmongery
How to create structural carcassing work, how to erect trussed rafter roofs, how to construct gables, verge and eaves, how to install floor joists and coverings
You will also produce a portfolio of evidence demonstrating examples of your work throughout the apprenticeship
Attendance at York College on block release basis. The qualification achieved will be Carpentry and Joinery Apprenticeship level 2.Training Outcome:On completion of this apprenticeship, the apprentice will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) card at the appropriate level. Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option. If you’re as ambitious as we think you are, you may want to continue for a further year with our Advanced Apprenticeship.Employer Description:We’ve been nationally recognised as a 5 star house builder thirteen years in a row, that’s more than any other major house builder. This is because we combine the brightest minds, the latest technology, and a genuine commitment to putting customers first. We want the best people in the industry to help us shape the future of building.Working Hours :Hours to be worked Monday - Friday between 8.00am and 5.00pm (details to be confirmed).Skills: Communication skills,Attention to detail,Team working,Physical fitness....Read more...
Please note: This role involves poolside duties, and you must be a strong swimmer to be considered for an interview. A swim test will be required at the interview stage – details are at the end of this job description.
Everyone Active is a leading UK Leisure Provider and are recruiting Apprenticeships in Leisure Team Member roles, to start a career in the Leisure Industry.
Progression within the company is a core value, and on completion of your apprenticeship you will have plenty of opportunities to progress and develop within the company.
We're looking for enthusiastic people with a willingness to learn who can help achieve our mission of getting our customers to be active 30 minutes a day 5 times a week.
The Leisure Team Member Apprenticeship is a great opportunity to begin your career in the Leisure Industry. As part of your apprenticeship you will gain your National Pool lifeguard Qualification along with other nationally recognized qualifications in Leisure. As part of the 18-month programme you will gain the following qualifications;
• National Pool Lifeguard.• Level 2 Gym Instructing.• Level 1 Assistant Swim Teaching.• Level 2 Swim Teaching.
Your day to day duties with consist of working to ensure the full operations of a Leisure Centre and maintaining all of the required set standards across the organisation. You will be trained to safely operate the pool as part of a team and ensure the safety of the public. As part of your role you will learn and develop all the skills required to operate the different leisure facilities and activities such as swim and fitness provision. Please be aware, this will also include working on the Reception Desk when required.
This is an exciting opportunity for any candidate who has a drive and commitment to develop a career in the leisure industry. A candidate who is keen to learn and become a valued member of the team with flexible skills and attributes to develop into the future.
This is a full-time position and you will be required to work on a shift basis at your designated centre. You will be employed on a fixed term contract.
If you are invited to interview for this role you will be required to complete a swim test as part of the interview process, in order to be considered for the role you must be able to demonstrate you are able to do the following:
• Jump/dive into deep water.• Swim 50 metres in no more than 60 seconds.• Swim 100 metres continuously on front and back in deep water and then tread water for 30 seconds.• Surface dive to floor of pool (deepest part).• Climb out unaided without ladders/steps.
With Everyone Active you will be studying towards your Leisure Team Member Apprenticeship Level 2 Standard over the course of 15 months.Training Outcome:Potential Progression to Team Leader and then onto Duty Management training.Employer Description:Sports and Leisure Management Limited (SLM Ltd) is the company behind the Everyone Active brand. The Company is the longest established leisure contractor in the UK having been formed in 1987 by our CEO Stephen Hulme. The Company has seen significant growth over the years and currently manages 93 sports, leisure and cultural facilities in partnership with 34 Local Authority clients.Working Hours :40 Hours Per Week - Exact Shifts To Be Confirmed - Including Early Mornings, Evenings And WeekendsSkills: Communication skills,Attention to detail,Organisation skills,Team working,Physical fitness....Read more...
