Electrical Engineer Lead Permanent Bridgewater Responsibilities The main responsibility is to support the Electrical Lead in discharging their delivery duties. The Electrical Engineer will be responsible for:
Keep up to date the Electrical Scope of BTSC contract HK8010 with the support of quality team
Supporting the design delivery process including participating in gate reviews i.e. HO1, HO3
Identifying and assessing Risks, Critical Issues and Hot Spots that may impact the MEH Programme delivery.
Supporting the process of resolution of decoupling and final value data
Providing support to the Technical Lead:
Manage of works information instructed under their scope.
Review and acceptance of contract construction documentation as required by surveillance matrix.
Ensuring all necessary documentation has been identified, authored, and approved prior to start of construction.
Responsibility Analysis of electrical discipline scope gap ahead the construction sequence.
IIM Team support
Supporting IIM Building Leads in preparation of work packs, issue resolution and closure of control gates pre-construction
Follow the site progression of the check Sheet completion and update them if needed following quality feedback.
Commissioning interface
Review of CTP, need meticulous analyse, link to site preparation activities.
Technical review of the CND (Connecting Diagram) makes by the Responsible Designers:
Consistencies with Cable list
Consistencies with I/O I&C signal
Consistencies with Supplier documents
Knowledge
Track record of delivering technical expertise in projects within a technically complex and dynamic environment, whilst ensuring high levels of safety, security and environmental responsibility, ideally within the Nuclear Energy sector or similar regulated environment.
Demonstrable awareness of integrated management system and the different policies, procedures, standards and documents applicable to technical and contractual management.
Demonstrate significant expertise in relevant technical discipline
Experience of successfully engaging, managing and influencing groups of stakeholders and facilitating issues resolution.
Good presentation, influencing and facilitation skills. Excellent communication and organisational skills, able to develop relationships and maintain effective networks.
Meticulous and rigorous approach to engineering to achieve high professional standards;
Proven ability to successfully deliver engineering safely to the correct quality, time and cost in a fast paced, schedule driven environment;
Ability to work autonomously but with awareness of own limitations;
Knowledge of contractual and commercial mechanisms.
Strong numerical and analytical skills.
Understanding of PWR/EPR design and experience in PWR/EPR construction.
Working knowledge of French language an advantage.
Degree and chartered status in an engineering, construction or other related field.
Knowledge of CDM Regulations.
If interested in the role, please contact me at moeez.muhammed@servicecare.org.uk....Read more...
Electronics Engineer Consultant – Security Clearance – Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company. You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies. Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies. Due to this, I’m expecting a lot of interest in this role. If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications. Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Machine Learning Engineer – Defence Sector – Cambridge
A growing organisation within the Defence Sector, based in Cambridge, is currently seeking a skilled Machine Learning Engineer or Artificial Intelligence Engineer to contribute to the ongoing development of defence, security, and intelligence technologies.
This is an expanding organisation offering intriguing career development opportunities based on success. You will work on a variety of projects, ranging from small individual initiatives to large ongoing projects, where you will collaborate with mechanical engineers, electronics engineers, inventors, scientists, and other industry experts.
Given that you will be working on cutting-edge technologies with potential applications in corporate and national security measures, the ability to obtain security clearance is necessary.
Ideally, you will have experience in Machine Learning or Artificial Intelligence projects spanning several years. While experience in the defence sector would be highly advantageous, it is not a strict requirement.
What makes this organisation truly fascinating is its structure, which enables you to tackle some of the world's most intriguing problems without the bureaucratic hurdles often encountered in larger organisations.
It is expected that you hold a degree that has prepared you for a role in Machine Learning or Artificial Intelligence.
In addition to working on highly challenging and captivating projects, you will receive a competitive salary, bonuses, pension benefits, complimentary meals, health insurance, ongoing skills training, and other outstanding perks.
If you seek daily challenges and the opportunity to work on projects at the forefront of the ML/AI field, we encourage you to apply now, as we anticipate significant interest in this role.
For more information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Are you a seasoned Structural Engineer ready to make a significant impact? Our client in Exeter is seeking a passionate Principal Structural Engineer to take a senior position in their team!
As a Principal Structural Engineer, you'll spearhead their structural engineering projects, bringing expertise and leadership to the table. You'll collaborate closely with multidisciplinary teams, driving innovation, and delivering high-quality designs that exceed expectations.
This is a great opportunity to join the Exeter office of a national multi-disciplinary consultancy, playing a leading role in a team with an excellent reputation, solid forward order book and genuine opportunity for further promotion.
What’s On Offer
Thriving and inclusive work culture that values your expertise.
Opportunities for professional growth and career development.
Engaging projects that make a real difference in the community.
Competitive salary and benefits package.
What You Need To Succeed
Minimum of eight years’ experience with a UK structural engineering consultancy.
Confident with 3D design (including use of Tekla), Revit would also be advantageous.
Exceptional leadership and communication skills.
A proactive and collaborative approach to problem-solving.
MEng or BEng in Civil Engineering (or equivalent).
Chartered with IStructE or ICE.
About Strata Consulting
We are an Employment Agency specialising in the placement of contract and permanent staff in construction companies and design engineering consultancies across the UK. For further details please visit our website.
If this advertised position does not interest you, please consider our other opportunities by sending your updated CV outlining your achievements and your personal requisites, i.e. job roles, location, salary to us. We also operate a referral scheme, of which further details can be found on our website (search "Strata Construction Consulting").
Due to the sheer volume of applications we receive, we will only contact successful applications. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful. Candidates must be eligible to work and live in the UK.....Read more...
Electronics Engineer – Cancer Instrumentation – Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices. While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards. You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients. However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success. They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Medical Diagnostics Design Engineer – Electromechanical Design – London
A new Medical Devices start-up company, based in London, is seeking a Medical Diagnostics Design Engineer to assume responsibility for the Electromechanical Design of a new Medical Diagnostics technology.
You will be part of a team that includes physicists, scientists, electronics engineers, and other Medical Devices experts. Your role will encompass all aspects of the mechanical and electrical development of this innovative medical diagnostics technology.
You should have prior experience in the electromechanical design of medical devices or life sciences technologies.
It is expected that you hold a degree in a relevant subject, coupled with several years of industry experience.
The company has the unique ability to offer an excellent benefits package, which is unusual for a start-up. This package includes a pension, shares, medical insurance, life assurance, and other outstanding benefits, in addition to a competitive starting salary.
We are looking for someone to start as soon as possible, and interviews will be conducted swiftly. Therefore, if you are interested in the role, we recommend submitting your application now to avoid missing out.
For more information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on 0121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Job Title: Field Service EngineerSalary: £33,000paLocation: SouthamptonWho will you be working for?Our client is an international company that can offer excellent employee benefits and support, and a positive working environment. They are growing their team of field engineers and are looking for someone to cover Southampton and the surrounding areas. As you will be in the field, working independently, experience in a similar setting would be great, someone that I able to provide top quality support and serviceWhat are we looking for?We are looking for a mechanical engineer to service and maintain their machines to company, risk assessment, compliance and safety standards. You will work closely with the support team, maintain company records and on occasion work on call over weekends. The right person will have experience servicing big machinery such as large vehicles or farming equipment.Responsibilities/skills –
Experienced in Mechanical Engineering essentialElectrical Competent, including Control panels & 400V essentialWelding & Abrasive wheels (Grinding) experience beneficialExperienced in parts fitting & assembly an advantageBasic experience in plumbing and an understanding of calibration an advantageBasic level IT, including Microsoft Office (Outlook and Excel) an advantage
Does this sound like you?If you are keen to discuss the details further, please apply today or send your cv to Hayley....Read more...
Senior Software Engineer; Medical Devices; Product Design;
Software Engineers will be involved in collaborating with internal departments such as Sensors to design and implement software components for both new and existing advanced in-house systems, aimed at enhancing manufacturing efficiency and quality control. This involves troubleshooting and resolving existing technical issues, as well as innovating new features.
Writing, technical software documentation (e.g. user guides, design documents).
Keeping up to date with the latest developments in relevant technologies and methodologies.
Software Engineers will have some of the following experience3+ years of experience designing medium-large scale applications involving hardware integration in LabVIEW.Certified LabVIEW Architect (CLA). 1+ years of experience working within a scrum framework as part of an agile implementation.1+ years of experience working with source code control, specifically Git.Experience working with motion control systems.Experience working with National Instruments (NI) hardware.Working within a lead....Read more...
Join team as a Manual Test Engineer for GNSS and ADAS products. Your responsibilities include manual testing, process development, regression testing, bug reporting, and customer support.
Responsibilities:
Conduct regression testing of previously released products and features to validate their ongoing performance.
Identify, replicate, and report bugs to assist in their resolution and ensure product quality.
Utilize familiarity with hardware testing tools such as oscilloscopes, logic analysers, and multimeters to perform hardware-related testing.
Apply expertise in testing high-accuracy GNSS (GPS), data-logging, CAN-Bus, and serial data to ensure precision and reliability.
Leverage experience in testing equipment used in ADAS validation and accreditation, ensuring compliance with safety and performance standards.
Key Skills:
Knowledge and experience in Advanced Driver Assistance Systems, including sensor and camera testing.
Ability to assess and improve the usability of products, particularly the user interface (UI).
Skill in conducting regression testing to verify product stability.
Expertise in hands-on testing methods.
Knowledge and experience in testing Global Navigation Satellite Systems (GNSS), including GPS.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Process and Maintenance EngineerBirchington, Kent – Own transport required due to location£££ Competitive Permanent – Full Time 15:00 – 00:00 Tuesday – SaturdayBenefits:• Competitive Salary – (Unfortunately we are unable to disclose this in our advertising but will discuss on initial call.)• 28 days holiday entitlement + bank holidays! • Company Pension • Free Parking • Private Medical Cover• Company Social Events• Employee Assistance ProgrammeOur client is passionate about delivering the freshest and highest-quality produce to their customers. With a dedication to sustainability, innovation, and excellence, they strive to set the standard for the fresh produce industry. Join the team and be part of a company that values integrity, teamwork, and continuous improvement.They are seeking a dynamic Process and Maintenance Engineer to join the team. This role is critical in ensuring the smooth operation of production equipment, maintaining a commitment to safety, quality, and efficiency.Key Responsibilities:• Maintain production equipment to ensure it meets high standards of safety and efficiency.• Conduct fault finding and repairs on electrical and mechanical components, with a focus on 3 phase motors, circuit fault finding, and safety relay fault finding.• Continuously review production processes and equipment to identify areas for improvement.• Execute planned and preventative maintenance programmes to minimise downtime and optimise performance.• Participate in continuous improvement initiatives to enhance productivity and quality.• Monitor equipment performance against set KPIs and take proactive measures to address any issues.• Uphold health & safety regulations at all times to create a safe working environment.• Collaborate as a member of the Engineering team to contribute to the overall success of the business.Qualifications and Experience:• Solid experience in electrical control and drive circuits. • Display a sound knowledge of PLC systems and an understanding of mechanical and pneumatic systems in line with current legislations - HASAWA, COSHH, PUWER, LOLER, WAHR and Electricity at Work Act. • Be self-motivated and able to prioritise in a fast-paced environment. • A high degree of craftsmanship and attention to detail. • Previous experience of working within a food processing environment would also be beneficial. • 1-2 years’ experience is preferable. • A minimum of HNC/NVQ Level 3 or equivalent in an electrical biased engineering discipline or completed an engineering apprenticeship. • Be fully qualified in 17th edition.Westin Par values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010.Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies, we are acting as an Employment AgencyDue to the high volume of applicants applying for all roles, we can only reply to candidates with the most relevant skills and experience. If you have not heard back from us within 48 hours of your application, please assume that you have been unsuccessful on this occasion.Do not hesitate to contact us about this or any other roles.....Read more...
Mechanical Engineer - Medical Devices Validation
Newton Colmore is working with a medical devices company in Cambridgeshire, and we are looking for a mechanical engineer to join their verification and validation team.
In this Mechanical Engineer role, you will be working on novel and complex medical devices whilst collaborating closely with fellow engineers, external consultants, and suppliers to ensure the company’s products deliver a step change.
Your work will be vitally important in ensuring the successful execution of validation and verification activities required ahead of regulatory approval, product launch, and mass manufacturing. This role will initially focus on an FDA submission and after this is complete, the role will naturally evolve, and you will take on extra responsibilities as the company moves to its next phase.
You will be heavily involved in readying the company’s product for clinical trial, and the verification and validation test plans and protocols for the product, documenting all activities within the Quality Management System. Another key part of the role is the contribution to the Standard Operating Procedures.
To be considered for this opportunity you will need to have prior experience with medical devices and an ISO 13485 environment, coupled with expertise in writing test protocols and familiarity with QMS. Ideally this will be from a mechanical engineering background and any experience with CAD would be highly beneficial. For this role, we are ideally looking for a candidate who has 1-to-3 years’ worth of experience.
The company are passionate about delivering a step-change for patients with their technology and they need great people to help them with this mission.
In return for your hard work the company offer a salary, tailored to your experience level, and a benefits package that includes bonuses, industry leading pension contributions, 25 days holiday and much more.
Matt Lowdon is taking lead on this assignment and so please do make a confidential application for more details.
Matt has been working with this company for over 12 years and can offer deep insights and knowledge throughout the interview process, with the aim of maximising your chances of securing this role.
Newton Colmore is a specialist executive search and talent solutions company dedicated to the medical devices and biotechnology sectors. Founded in 2015, we have helped our clients find expert scientists and engineers across the globe.
....Read more...
Electrical Shift Engineer-Manchester-£39,000-Day Shift Are you a engineer looking for a new role? Would you like to work on a static site? If so this could be the role for you! CBW as an excellent new opportunity for a electrically biased engineer to join an established FM company on a permanent basis. This is working on a static site within the Manchester area. This requires you to come from a building services background. Below are all of the details on this exciting opportunity! Hours:07:00-19:004 on 4 off - RepeatDuties & Responsibilities:Work in provision of excellent service delivery by monitoring service performance, taking corrective action when necessary across the client’s premises and escalating to the Contracts Manager.Provide first line management and leadership to contract dedicated team, setting team objectives and individual performance management reviewsDeliver PPM relating primarily to Mechanical & Electrical Building Services Plant and System’s in-line with agreed programmes / SLA's in order to meet Client and Statutory Compliance.Ensure Technicians PPM work is undertaken in-line with agreed timelines/ SLA's, PPM backlog is maintained at a realistic level and all Reactive Work is completed within acceptable timescales and SLA standards.Completed work and documentation and ensuring compliance with current legislation.Costing and completing reactive works identified through PPM work undertaken when requested.Provide service support as part of a team providing quality service delivery Develop excellent working relationships with our client their staff or appointed representative through good customer service.Assist with supervision of sub-contractor works ensuring compliance and adherence to applicable H&S standards when requiredCompleting all required documentation, job sheets and certificates.Package:Basic salary of up top £39,00022 days holiday includedPrivate healthcareCompany pensionCareer progression Person specification:Experienced in Statutory & Mandatory Compliance Maintenance Records / Certification and uploading onto Service Systems. City and Guilds 2382-15 18th EditionIdeally all candidates would have completed a Electrical apprenticeship IOSH Working / Managing Safely (Desirable)Safe system of Work Procedure – PTW; RAMS etc. (Desirable)L8 Training (Desirable)Get in touch with maxine@cbwstaffingsolutions.com for more information! ....Read more...
Vacancy: Maintenance SupervisorLocation: Brough (HU15)Hours: Monday - Friday 08:00 - 16:00Salary: £4000 - £37000Elevate your engineering career with a prestigious firm renowned for its unwavering commitment to quality, reliability, and technical innovation. Established over four decades ago, this esteemed client is seeking a diligent Maintenance Engineer to join their dedicated team.Benefits:- Join a company with a sterling reputation and a stable foundation built over 40 years.- Contribute to a culture that prioritises safety and continuous improvement.- Engage with cutting-edge manufacturing processes and technologies.- Receive comprehensive training and support for professional development.- Work within a collaborative environment that values knowledge sharing and teamwork.- Benefit from a competitive salary and a robust benefits package.Role:In this pivotal role, the successful candidate will ensure the smooth operation of manufacturing equipment by performing both planned and reactive maintenance tasks. The Maintenance Engineer will be instrumental in maintaining a secure working environment, adhering to health and safety protocols, and fostering a culture of safety awareness.Key responsibilities include the upkeep of machinery to guarantee safe operation, meticulous record-keeping of maintenance activities, and the implementation of system enhancements. The role also involves crafting Risk Assessments for equipment and collaborating across departments to enhance machine availability and drive operational improvements. Additionally, the incumbent will share their expertise by training colleagues, thereby strengthening the collective skill set of the workforce.Requirements:- An NVQ Level 3 (or equivalent) in an engineering discipline.- Possession of the 18th Edition qualification.- Demonstrable experience in an engineering capacity within a manufacturing setting.- Proficiency in interpreting and revising engineering schematics.- Familiarity with variable speed drives, inverters, and PLCs.- Experience with a CMMS TPM system.- A proactive, self-motivated approach to work in a dynamic environment.- Exceptional communication skills and the ability to engage effectively at all organisational levels.- A relentless drive for personal growth and learning.This role is not merely a job; it is a chance to become an integral part of a legacy of excellence. If you are a driven engineer with a passion for learning and improvement, apply now to take the next step in your career journey.Aqumen Business Solutions is acting as an Employment Business in relation to this vacancy.....Read more...
Backup & Storage Support Engineer
Polar Recruitment are currently recruiting on behalf of one of the worlds’ leading IT Services providers for an experienced Backup & Storage Support Engineer to be based at a prestigious customer site, delivering a range of support functions including installation, monitoring, troubleshooting and diagnostics of Backup and Storage solutions.
Responsibilities
Lead support and improvement of the estates’ Backup & Storage solutions
Provide 3rd line technical support, and assist 1st/2nd line support resolution within agreed SLA’s
Meet agreed build standards
Explain technical concepts and provide guidance to the customer
Assist the 3rd line support team with projects and problem resolution, and provide MS Windows support where applicable.
Skills & Experience
Essential;
2 years + experience with Backup & Storage technologies and solutions, preferably with various operating systems, applications, databases, and virtualisation.
Strong Backup & Storage technical skills including (some of); Veritas Netbackup and BackupExec, IBM Spectrum Protect and Spectrum Protect Plus, NetApp Filers, Hitachi Storage.
Detailed knowledge of backup and storage methodologies to assist in defining policies and processes.
Broad IT infrastructure understanding; (e.g. Windows Server/AD/Exchange/SQL, AIX, VMware, Oracle etc.)
Ability to write quality technical documentation for all aspects of the technical infrastructure
Strong 3rd line support skills and experience managing service requests/incidents and problems.
Excellent communication and customer service skills.
Holds, or able to attain, Security Clearance at SC Level
Desirable;
Highly Available Storage solutions
SAN Fabric
Storage/Backup technical certification.
ITIL Certification
Working knowledge of SM9/SNOW or similar
The Backup & Storage Support Engineer will be rewarded with an exciting role with a global leader in the IT Services space, allied to superb career advancement opportunities, an attractive salary and comprehensive benefits package including Private Medical/Health Insurance, Company Pension Scheme, Income Protection, 23 days Holiday (rising to 25 days, plus the option to buy or sell additional holiday), Life Insurance, and more.
In addition, access to on-site facilities including a subsidised on-site restaurant and free parking will be available for the successful candidate, along with some flexible working, on a hybrid basis.
....Read more...
Director of EngineeringLondon£85'000 to £100'000 Basic + 20% Bonus + Hybrid + Progression + 33 Days Holiday + Life Cover + Pension + L&D OpportunitiesAn amazing opportunity for a Director of engineering to work for a renowned company with a global reputation for excellence in the marine industry. You will come in and reestablish their business in the UK and become a true industry specialist working in a huge market.This company has a first class reputation in their industry and is looking for an engineering director to spearhead their UK growth. You'll be leading the technical department and working with huge clients in the marine industry, whilst managing and growing a multi disciplinary team. Your role as Director of Engineering will include: * Managing the engineering staff and their technical output. * Understand the business strategy and company goals and build a roadmap to meet these aspirations. * To take the lead role in the application, review and upkeep of engineering business processes and quality assurance procedures across engineering conducted. * Represent the Group Chief Engineer at programme design reviews and present engineering programme reports.The successful Director of Engineering will need: * Degree in Engineering, Mechanical Engineering, Electrical Engineering, Maintenance or equivalent. * Significant experience working in the Marine industry either in: Oil & Gas, Renewables, Commercial, Cruise & Ferry, Defence. * Management experience * Understand the engineering process from concept design to building it and handing it over. * Must hold current Driving Licence.Please apply or call Zil Akdogan on 02038137932Keywords: engineering director. Director of engineering, principal engineer, engineer, director, London, Aberdeen, Belfast, Appledore, marine, oil and gas, defence, cruise and ferry, energy, renewablesThis vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of Employment Agency.Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
We are looking for a Process Engineer to work on a permanent basis near Ashton Under Lyne.
Salary is c£35-40,000 per annum plus 25 days' holiday and bank holidays, pension etc.
Brief duties of the role:
Overseeing aluminium heat treatment and material testing processes and compliance
Ability to read / understand aerospace drawings and specifications
NADCAP heat treatment experience
Sheet metal manufacturing
Duties for the Process Engineer:
Process auditing
Carry out a month audit against the NADCAP pre-audit check sheets
Identify any issues / implement corrective actions
Ensure compliance ahead of the annual NADCAP audit
Work closely with the Quality Manager to prepare for the NADCAP audit
Host the NADCAP audit
Respond to any NADCAP audit NCRs
Processing parts:
Using the WTL / AOG tracker, ensure that the team process parts on time
Ensure that the team understand the process specifications and that all parts are processed or tested correctly
Maintain operator training records / stamp scopes are kept up to date
Create, maintain SOPs for each process
Equipment / plant capability
Working with the HDL QE – ensure that all plant / testing equipment remains calibrated
Working with Vectar / other – ensure that all plant is maintained
Oversee the weekly TUS / SAT checks
Ensure that test pieces are sent to AMPP monthly
Update the TPM documents and ensure that daily / weekly checks are completed on time
Sign off 5S checks for the cell/s
Schedule regular plant cleaning (i.e emptying of the quench pit)
Employee training
Provide inductions and training for existing or new employees
Update / maintain training records and matrix
Identify where further training is required and facilitate
Other/ad-hoc:
Identify CI / efficiency opportunities
Develop a technical understanding of the HT database, cleansing / auditing as needed
Act as the ‘go to’ person for all technical queries
If the Process Engineer role could be of interest, please call Rebecca at GPW Recruitment or press APPLY NOW!....Read more...
Role: Shift Engineer (Machanical/Electrical)
Location: South Kildare
Salary: Excellent Package for the right candidate
An exciting Opportunity has arisen for a Shift Engineer to work for a Manufactures in Kildare, to ensure plant and machinery is operating in an efficient and correct manner
Responsibilities:
Work closely with both Shift Manager and the Engineering Department to carry out any servicing, repairs and maintenance to agreed and accepted Company standards, and to enable production on the machines to meet agreed performance standards, and quality of product to be manufactured within specification.
Ensure the fast resolution of any problems, and to ensure safety, optimize machine efficiency and minimize waste levels.
To participate in the cover system and to be flexible enough to work, out of contractual hours as necessary to fulfil the needs of your role to work away from the site if required.
To attend any courses or visits arranged as part of the development and training programme.
To co-operate with any trials or changes to working practices.
To suggest new projects or working practices to ensure continual improvement in health and safety, quality, performance and the general functioning of the site.
To carry out all Planned Preventative Maintenance on schedule, to agreed and accepted Company standards, and to comply with agreed safe working practices at all times.
To monitor the performance of the machinery and equipment, and to be pro-active in avoiding downtime by initiating and necessary improvement measures prior to failure.
To ensure that any routine day to day engineering tasks (e.g. breakdowns, servicing and maintenance work) are priorities to be agreed with the Shift Manager and/or Engineering Manager, as appropriate.
Repair any breakdown within the plant or site as requested.
To assist with production, improvements, projects and reconfigurations as required.
Problem solving and fault diagnosis on a range of equipment - blow moulding machines, air compressors, chillers, conveyors etc.
Knowledge of PLC operation and interrogation.
Experience with hydraulics and pneumatics with the ability to reseal and repair components.
To maintain correct levels of tooling and moulds/mould reports.
To carry out neck changes when required.
To monitor and correct cycle times.
To ensure tooling store is kept tidy.
Carry out heads strips and mould changes when required.
To carry out any reasonable request from the Manufacturing Manager/Engineering Manager.
Requirements:
Time served engineer
5 years relevant experience
ONC qualification
Demonstrate a hands-on results orientated approach
Practical understanding of PLC equipment
Ability to fault find with pneumatics, hydraulics, electrics and electronics.
Understanding of plastics moulding equipment
HND/HNC/ degree level qualification
IT Skills (MS Office)
Due to the urgency of this vacancy, it is not possible for our client at this time to consider anyone without the appropriate work permits, visas or sponsorship’s already in place. Therefore, we are unable to consider candidates who do not have full authorization to work in Ireland. Applications submitted without the necessary visa in place will not be considered. ....Read more...
As a Senior Regional Service Engineer, you will join a dedicated service team, where you will play a pivotal role in upholding the Kärcher brand while delivering exceptional service to their customers. Within this role you will predominantly, maintain and repair across the North West ideally located to cover Blackburn, Bradford, York. This role offers an exciting opportunity to contribute to the growth and success of Kärcher by providing first class professional service and support for industrial cleaning equipment.
Kärcher, a globally recognised leader in cleaning technology renowned for commitment to innovation, quality, and customer satisfaction, Kärcher offers a dynamic work environment where employees can excel and grow professionally.
Key Responsibilities for the Senior Regional Service Engineer
Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery
Serve as a custodian of the Kärcher brand, embodying the values in all interactions
Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs
Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery
Complete work orders promptly and accurately, maintaining meticulous records
Manage stock in accordance with customer requirements, ensuring optimal inventory levels
Collaborate with the regional scheduler to optimise efficiency and customer satisfaction
Identify and communicate sales leads to the relevant sales personnel, contributing to business growth
Develop positive relationships with customers and internal teams
Participate in on-the-job coaching and personal development activities
Qualifications and Experience for the Senior Regional Service Engineer
Formal mechanical/electrical qualifications are required
Experience, attributes and skills required for the Senior Regional Service Engineer
Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines
Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous.
Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training
Excellent communication skills and ability to work effectively in a team environment
Strong organisational skills with the capacity to manage multiple tasks efficiently
A full UK driving license is essential, with willingness to travel and stay overnight as required
Passport for potential training in Germany is preferred
What’s in it for You
This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,000 rising to £39,250 after probation, based on a 40 hour week Monday – Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more!
....Read more...
As a Senior Regional Service Engineer, you will join a dedicated service team, where you will play a pivotal role in upholding the Kärcher brand while delivering exceptional service to their customers. Within this role you will predominantly, maintain and repair across the South East covering Kent, Sussex, Surrey and Hampshire. This role offers an exciting opportunity to contribute to the growth and success of Kärcher by providing first class professional service and support for industrial cleaning equipment.
Kärcher, a globally recognised leader in cleaning technology renowned for commitment to innovation, quality, and customer satisfaction, Kärcher offers a dynamic work environment where employees can excel and grow professionally.
Key Responsibilities for the Senior Regional Service Engineer
Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery
Serve as a custodian of the Kärcher brand, embodying the values in all interactions
Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs
Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery
Complete work orders promptly and accurately, maintaining meticulous records
Manage stock in accordance with customer requirements, ensuring optimal inventory levels
Collaborate with the regional scheduler to optimise efficiency and customer satisfaction
Identify and communicate sales leads to the relevant sales personnel, contributing to business growth
Develop positive relationships with customers and internal teams
Participate in on-the-job coaching and personal development activities
Qualifications and Experience for the Senior Regional Service Engineer
Formal mechanical/electrical qualifications are required
Experience, attributes and skills required for the Senior Regional Service Engineer
Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines
Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous.
Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training
Excellent communication skills and ability to work effectively in a team environment
Strong organisational skills with the capacity to manage multiple tasks efficiently
A full UK driving license is essential, with willingness to travel and stay overnight as required
Passport for potential training in Germany is preferred
What’s in it for You
This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,000 rising to £39,250 after probation, based on a 40 hour week Monday – Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more! ....Read more...
As a Senior Regional Service Engineer, you will join a dedicated service team, where you will play a pivotal role in upholding the Kärcher brand while delivering exceptional service to their customers. Within this role you will predominantly, maintain and repair across the South East covering Kent, Sussex, Surrey and Hampshire. This role offers an exciting opportunity to contribute to the growth and success of Kärcher by providing first class professional service and support for industrial cleaning equipment.
Kärcher, a globally recognised leader in cleaning technology renowned for commitment to innovation, quality, and customer satisfaction, Kärcher offers a dynamic work environment where employees can excel and grow professionally.
Key Responsibilities for the Senior Regional Service Engineer
Maintain a high standard of service and repair on all cleaning equipment, ensuring world-class service delivery
Serve as a custodian of the Kärcher brand, embodying the values in all interactions
Communicate regularly with the Regional Service Manager to coordinate activities and address customer needs
Diagnose and repair a wide range of industrial cleaning equipment, including municipal machinery
Complete work orders promptly and accurately, maintaining meticulous records
Manage stock in accordance with customer requirements, ensuring optimal inventory levels
Collaborate with the regional scheduler to optimise efficiency and customer satisfaction
Identify and communicate sales leads to the relevant sales personnel, contributing to business growth
Develop positive relationships with customers and internal teams
Participate in on-the-job coaching and personal development activities
Qualifications and Experience for the Senior Regional Service Engineer
Formal mechanical/electrical qualifications are required
Experience, attributes and skills required for the Senior Regional Service Engineer
Proficiency in electronics, batteries, hydraulics, pneumatics, mechanical, and diesel engines
Experience with municipal cleaning equipment, fork trucks, HGVs, plant hire, horticultural, or agricultural machinery is advantageous.
Proven experience in the service and/or cleaning industry is preferred, or willingness to undergo fast-track training
Excellent communication skills and ability to work effectively in a team environment
Strong organisational skills with the capacity to manage multiple tasks efficiently
A full UK driving license is essential, with willingness to travel and stay overnight as required
Passport for potential training in Germany is preferred
What’s in it for You
This is a great opportunity to join a market leader, who offers a collaborative culture and progression opportunities. The starting salary offered is £38,000 rising to £39,250 after probation, based on a 40 hour week Monday – Friday with OTE £50K with overtime. You will receive a fully expensed vehicle, with optional private use, all tools provided. You will receive 25 days holidays, plus bank holidays and your Birthday too, progression opportunities, pension scheme, end of year discretionary bonus, health plan, critical illness cover, sick pay, staff discounts, plenty of social events and more! ....Read more...
Building Services Engineer / Technical Author
Training Provided - Mechanical Building Services Engineering Essential
Based Anywhere In The UK - Remote Working From Home
Mon To Fri - 9am To 5pm - 35 Hours Per Week
34 Days Holiday, Private Medical Insurance, Various Other Benefits
Up to £40k per annum
Are you an experienced Mechanical Building Services Engineer looking an exciting opportunity to come off the tools and learn how to use your wealth of knowledge to help others?
Our well-established client provides a web-based software platform to make building maintenance schedules available to engineers in the field for over 800 subscribers including museums, libraries, councils, retailers, healthcare suppliers, and manufacturers. They have offices based in the North and South but the role is fully remote.
Due to continuous growth, they are currently looking for a Mechanical Engineer with Building Services experience to join their existing team and go through a 6-12 month training plan in order to become a Technical Author. The role involves the management and provision of advice to internal groups and members, the facilitation, writing and maintaining of technical publications, and the research and collation of Facilities Management and Building Services schedules.
This is a fully remote role and you can be based anywhere in the UK. Travel to one of their offices for meetings is required occasionally, usually once per quarter.
Key Duties (Once Trained):
- Research, development and writing of service and maintenance schedules
- Continually review technical and legislative/statutory requirements, revising and creating maintenance schedules accordingly to align with changes in the industry, including schedule and task descriptions, maintenance actions, maintenance intervals and time taken to carry out listed maintenance
- The provision of advice to subscribers, members and staff
- Keeping abreast of relevant developments relating to the technical and safety aspects of the building services sector
- Collation and analysis of issues, trends and updates based on this analysis
- Gather information from industry and manufacturers to enable maintenance tasks to be developed for new equipment and sector specific requirements
Key Skills / Experience Required - Building Services Engineer:
- Experience of working as a mechanical maintenance/installation engineer, or mechanical building services engineer
- Happy to come off the tools and retrain into a new role
- A sound working knowledge of the technical requirements of mechanical building services maintenance
- Working knowledge of the requirements of Facilities Management, particularly in relation to mechanical installations
- Working knowledge of current regulations, industry standards and codes of practice
- Working knowledge of building handover documentation such as operation manuals, record drawings, manufacturers literature, and test certificates
- Ability to communicate effectively with a broad range of experts in the Facilities Management and Building services sector
- Ability to interpret standards, best practice guides or similar etc. in order to draft, edit and produce documentation
- Proficient in written and oral communications skills
- Proficient IT skills familiarity with the use of Microsoft Office and Adobe Acrobat essential
- An enquiring mind with an interest in innovation within the sector
- Attention to detail and a proactive approach to work
- Willing attitude and readiness to take on new challenges
The Package - Building Services Engineer:
- Salary up to £40k after probation
- Holiday entitlement 26 days + 8 Bank Holidays
- Additional Leave Purchase Scheme You can buy extra 5 days holiday a year if needed
- Private Medical Insurance
- Summer Hours every other Friday off during summer months or every Friday afternoon
- Full Company Sick Pay for six months (after 6 months service)
- Enhanced Maternity/Paternity Pay length of service related
- Refer a friend bonus
About Precision People
Precision People is a leading recruitment agency that specialises in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries. With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership. Precision People has the expertise and resources to help you find the perfect role. With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations.
Interested? To apply for this Trainee Technical Author position, here are your two options:
1. "This is the job for me! When can I start?" - Call now and lets talk through your experience. Ask for Dan Henderson on 0116 254 5411 between 8.30am - 5.30pm
2. "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL....Read more...
Design EngineerBurnleyMon-Thurs 08:00-17:15 Fri 08:00-13:00Up to £45,000Design EngineerThe RoleMy client is a leading manufacturer in their field, with a well-established brand in the Precision Engineering sector. You will be based onsite at their global headquarters in Burnley, being responsible for providing technical support, developing new products, and providing continual improvement to current designs. Design EngineerMain Responsibilities
Process new enquires for the design department, ensuring all necessary follow-up action has been adhered to such as enquiry processing, delivery of quotation/design proposal for new contract research and consultancy.Develop close working relationships with clients and ensuring client liaison is continually adhered to.Undertake design and engineering analysis and support including FEA on design projects within the department and as a dedicated service.Development and detail product design and engineering from conceptual design through to detailed design and manufacturing implementation support as required.Undertake project management for projects directed by the Design Director. All project management activity to comply with industry guidelines.Maintain and adhere to ISO 9001.To effectively and efficiently work with Pro-engineer CAD package.To perform stress and strain calculations to recognise formulae and clearly layout workings within MathCAD to allow colleagues to interpret and validate design.To effectively utilise the company MRP system.To perform accurate high quality design output with minimal errors.To perform modifications to existing designs and drawing where necessary.
Design EngineerThe Candidate
Knowledge of fundamental engineering theory in mechanical engineering and product design.Knowledge of 3D CAD modelling systems.Knowledge and experience of Pro-Engineer and MathCAD.Knowledge of manufacturing processes and assembly.Experience in a similar background.Experience designing and manufacturing pressure equipment to the recognised standards.Previous experience dealing directly with customers, preparing technical specifications and presenting proposals.Ability to use Microsoft Office.Ability to use Lotus.Ability to use Mainframe.Ability to use CREO.Ability to use MAGMA.
Please contact Adam Lang at Winsearch UK for further information. Adam Lang - adam.lang@winsearch.uk Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website http://www.winsearch.uk and follow us on LinkedIn.Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!
The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see https://www.gov.uk/browse/visas-immigration/eu-eea-swiss
Many Thanks....Read more...
