Routine inspection and maintenance and electrical repair of fuel storage plant and equipment
Carry out planned maintenance activities and defect rectification
Overhauling of electrical systems making use of appropriate machinery / hand tools
Responsible for the filling out of job sheets, planned maintenance cards etc
Carry out PPM and extra work requirements in adherence to set engineering standards.
Understand a full range of electrical tasks
Training:
3 / 4 year apprenticeship
First two years will be in conjunction with Southampton City College on day release three or four days a week
Years 3 and 4 are based at the Gosport OFD site under a mentorship scheme
Training Outcome:
The progression would be into an EC & I Technician, but the OPA also offer progression routes into various Engineering and Project Engineer roles
Employer Description:The OPA are a statutory public corporation, sponsored by the Ministry of Defence, with the responsibility for the operation, maintenance and management of six Naval Oil Fuel Depots and one underground facility on behalf of the Secretary of State for Defence.
The OPA is also currently supporting Air Command and UK Strat-Com with a number of Fuel Assets across the UK and overseas.Working Hours :Whilst a the Depot the working hours are:
Monday to Thursday 07.30 to 15.30 and 07.30 to 15.00 on Friday.
When at college they need to comply to the college working hours.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Team working,Creative,Initiative,Patience....Read more...
Set, operate and program a variety of high precision 3, 4 and 5-axis machines
Ensure all work meets company quality standards
Manufacturing high-precision gears and gearboxes for use in aerospace, defence, power generation, oil & gas and automotive industries
Training:
You will study on a Level 3 Machining technician apprenticeship. On completion of this, you will gain a qualification in Engineering at Level 3 standard
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study
Training Outcome:
Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide
Employer Description:Ondrives, with its long-established history, is a leading manufacturer of precision gears, gearboxes, and mechanical drive components. Through our continuous investment in state-of-the-art manufacturing equipment and technology, we remain at the forefront of precision manufacturing, consistently delivering on quality, reliability, and service.
Our qualified and experienced design team offers a comprehensive service, from design and modifications to prototypes and production volumes. Our engineers are always ready to assist with applications, product selection, and technical inquiries, utilizing the latest calculation and analysis software, including KISSsoft.Working Hours :You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
Review and interpret technical information and requirements from different sources e.g. specifications, concepts, stakeholders
Develop effective solutions which satisfy the required standards and can be manufactured, proven, operated and maintained in a cost-effective way whilst minimising costs
Design engineering concepts to solve engineering challenges
Identify inaccuracies or discrepancies in engineering drawings and specifications and propose solutions
Produce detailed engineering drawings to relevant standards and codes, using paper and computer
Communicate and co-ordinate engineering design options with relevant stakeholders, colleagues and clients using sketches, schemes, models, detailed drawings and reports
Training:You will complete a 4 year apprenticeship specialising in Mechanical Engineering and will study with TDR Training, completing a portfolio of evidence to prove their competence to achieve a Level 3 Diploma in Engineering Construction Design and Draughting.
Training will be completed with a training provider who will monitor training and development within a formal apprenticeship standard.Training Outcome:
Design Engineer
Planning Manager
Operations Manager
Sales Applications Engineer
Employer Description:BEL Valves, part of the British Engines Group, is a global business with a strong brand delivered over 60 years.
BEL Valves offers design, manufacture, testing and aftermarket care of high integrity valves and actuators to critical offshore and onshore projects, within the oil and gas, power and renewables sectors.
Core activities are managed from the head office in Newcastle upon Tyne, with international projects supported from a local and satellite network.Working Hours :5 days a week. Shift pattern to be confirmed with the training schoolSkills: Communication skills,IT skills,Organisation skills,Presentation skills,Administrative skills,Team working,Initiative....Read more...
As a Machining Apprentice, you will be trained to become highly skilled in manufacturing complex, precision parts and components from specialist materials using various machines.
An apprenticeship is all about learning new knowledge, skills and behaviours, therefore, to be considered for this role of a Machining Apprentice, you must be able to demonstrate a genuine interest in Engineering and a willingness to learn.
Your core responsibilities will include:
Learning how to check materials before starting work
Becoming competent using technical information such as using drawings, and work packs
Setting up a range of workholding devices including chucks, colletts and vices
Learning to programme, set and operate CNC mills and lathes
Learning about different material for applications manufactured
Using a range of measuring equipment such as micrometres, verniers and a range of gauges
Becoming competent with health & safety awareness and general housekeeping in the workshop
Training:As a Machining Apprentice, you will be studying a Level 3 Machining Technician Apprenticeship. Throughout your Apprenticeship with VRS Precision Engineering, you will be supported by your company mentor and your PETA Learning and Development Coach. You will attend PETA’s Havant training centre for off-the-job training, one day per week for 39 months of the apprenticeship. Overall duration 45 months. Training Outcome:Over time, the role will develop to offer challenging new responsibilities to stretch your capabilities and understanding. Upon completion of your Apprenticeship programme, there is the potential to be offered a full-time position.Employer Description:At VRS Precision Engineering Ltd we manufacture precision machined components to customers’ specified designs for the Aerospace, Marine, Construction Industry and Medical Equipment Sectors but also for the Filtration, Defence, Medical, leisure, Oil and packaging industries.
A quality driven company, VRS have followed a policy of continuous investment in a highly skilled workforce, and as our plant list shows, top quality machines.Working Hours :Mon - Thu 07:00 - 16:30; Fri 07.00 - 11.00Skills: Team working,Strong work ethic,Motivated,Can-do attitude,Good communication skills,Desire to learn,Passion for engineering,Good manual dexterity....Read more...
Demonstrate capability within the sales Bid Process, challenging costs and estimates to ensure margin maximisation. Consistently meets and exceeds the required standards
Consistently meets the high standards of customer service required by BEL Valves
Consistently prepares and submits quotations in a timely manner, ensuring strict adherence to specified requirements and guidelines
Learn how to be proficient in the compilation and costing of valves and spare parts, collaborating closely with the Procurement Department to secure precise pricing information
Engage positively with clients, consistently seeking opportunities for upselling and maximise opportunities within the existing market
Promote a safe working environment by following BEL Valves safety policies and taking action to correct any unsafe behaviour or conditions
Interpret and follow drawings/diagrams and/or specifications for required components or assembly
Plan work activity, including resources, equipment
Quality check and adjust components or assembly against required specifications; for example, testing and calibrating
Identify and resolve problems with components or assemblies
Re-instate work area and equipment
Contribute to continuous improvement in component production or assembly
Training:You will complete a 4-year apprenticeship specialising in the first instance Assembly and Test followed by entering the sales team and will study with South Tyneside Marine School, completing a portfolio of evidence to prove their competence to achieve a Level 3 Diploma in Advanced Manufacturing Engineering.
At the start of your apprenticeship, you’ll spend the first 15 weeks at South Tyneside Marine School. You’ll then join the team at Bel Valves in Walker, where you’ll spend four days per week in the factory while attending college one day per week ultimately ending up within the sales office.Training Outcome:
Sales Engineer
Senior Sales Engineer
Sales Manager
Employer Description:BEL Valves, part of the British Engines Group, is a global business with a strong brand delivered over 60 years.
BEL Valves offers design, manufacture, testing and aftermarket care of high integrity valves and actuators to critical offshore and onshore projects, within the oil and gas, power and renewables sectors.
Core activities are managed from the head office in Newcastle upon Tyne, with international projects supported from a local and satellite network.Working Hours :5 days a week. Shift pattern to be confirmed by the training school.Skills: Communication skills,IT skills,Organisation skills,Problem solving skills,Administrative skills,Team working,Initiative....Read more...
Over the length of the programme, you will:
Assist in the design, development, program and test of mission-critical innovative solutions under the guidance of more experienced engineers
Work as an integral team member contributing to the resolution of hardware and software challenges
Support in the design and configuration of cyber-secure infrastructure and communications between solution components using industry-standard protocols
Support the installation and commissioning of solutions on customer sites
Working towards the successful completion of your apprenticeship qualification
Training:The apprenticeship:
This structured degree apprenticeship program combines work-based learning with academic study. Our degree apprenticeships are delivered in partnership with leading apprenticeship providers throughout the UK, you will work alongside experienced engineers on real-life projects, develop your technical skills, and study to complete a recognised qualification in Control Systems Engineering.
Our degree apprenticeship programmes are made up of a number of critical components, each designed to ensure that we develop well rounded colleagues who have both the experience, exposure and knowledge to deliver great performance.
You will be a valued member of our team from day 1 and learn to work on real projects from the get-go. From gaining hands-on experience to participating in networking events and structured learning sessions, you’ll get a unique development experience.
As an integral part of your apprenticeship, your progress will be monitored and assessed against government standard requirements. You will compile an evidence folder, demonstrating your areas of learning with accredited certificates of completion for elements of your training. Within the last six months of your apprenticeship, you will undertake an assessment by an independently appointed organisation, where you will be expected to clearly demonstrate your capability to perform in your chosen career.
To find out more about degree apprenticeships at ITI Group, visit our Careers Hub.Training Outcome:
Control Systems Engineer
Employer Description:ITI are the leading independent systems integrators in the UK. We deliver on a local level across the oil & gas, nuclear, renewables, infrastructure, manufacturing, logistics, food & beverage and defence industries.
We deliver transformation through innovation, enhancing the future of industry through digital intelligence and industrial automation, increasing safety and security.Working Hours :Monday to Friday. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working....Read more...
Interpret and follow drawings/diagrams and/or specifications for required component or assembly
Plan work activity, including resources, equipment and tooling
Produce individual components, for example keys, pipework, threading, wiring looms, interfacing parts, motors, wiring cables
Quality check and adjust components or assembly against required specification; for example testing and calibrating
Identify and resolve problems with components or assembly; fault diagnosis
Hand over completed components or assembly, this may include storage and commissioning
Re-instate work area and equipment
Contribute to continuous improvement in component production or assembly
Training:Engineering Fitter Level 3 Apprenticeship Standard:
You will complete a 4-year apprenticeship specialising in Assembly and Test and will study with South Tyneside Marine School, completing a portfolio of evidence to prove their competence to achieve a Level 3 Diploma in Advanced Manufacturing Engineering.
At the start of your apprenticeship, you’ll spend the first 15 weeks at South Tyneside Marine School
You’ll then join the team at Rotary Power in South Shields, where you’ll spend four days per week in the factory, while attending college one day per week
Training Outcome:
Valve Technician
Senior Valve Technician
Operations Lead
Employer Description:BEL Valves, part of the British Engines Group, is a global business with a strong brand delivered over 60 years.
BEL Valves offers design, manufacture, testing and aftermarket care of high integrity valves and actuators to critical offshore and onshore projects, within the oil and gas, power and renewables sectors.
Core activities are managed from the head office in Newcastle upon Tyne, with international projects supported from a local and satellite network.
Companies and products in the British Engines group include:
CMP Products – electrical cable glands, cable cleats and associated products
BEL Engineering – engineering service provider of sub-contract machining, assembly and test
Michell Bearings – hydrodynamic bearing manufacturer
Rotary Power – hydraulic motors and pumps, and hydraulic power units
BEL Valves – high integrity valves, actuators and controls
Stephenson Gobin – electromagnetic clutches and brakes, and fire safety products
Stadium Export Service – export service and industrial packing solutions
Tyne Pressure Testing – specialist pressure testing facilities, testing to extreme pressuresWorking Hours :5 days a week. Shift pattern to be confirmedSkills: Communication skills,IT skills,Organisation skills,Problem solving skills,Number skills,Team working,Initiative....Read more...
Working within BEL Valves Industrial Paint Shop with exposure to the Blast Chamber and Industrial Paint Application bays, utilising industry leading equipment and PPE
Working with overhead cranes to manoeuvre/manipulate component/assemblies
Learning required masking, and coating repair techniques
Learn to use the latest coating and profile measuring equipment
Interpret and follow drawings/diagrams and coating specifications for required component or assembly
Plan work activity, including resources, equipment and tooling
Quality check and adjust components or assembly against required specification; for example testing and calibrating
Identify and resolve problems with components or assembly; fault diagnosis
Hand over completed components or assembly, this may include storage and commissioning
Re-instate work area and equipment
Contribute to continuous improvement in component production or assembly
Training:Engineering Fitter Level 3 Apprenticeship Standard:
You will complete a 4 year apprenticeship specialising in an Industrial Paint Shop environment whilst also building up knowledge and skills within the Assembly and Test areas
You will study with South Tyneside Marine School, completing a portfolio of evidence to prove their competence to achieve a Level 3 Diploma in Advanced Manufacturing Engineering
At the start of your apprenticeship, you’ll spend the first 15 weeks at South Tyneside Marine School
You’ll then join the team at Bel Valves in Walker, where you’ll spend four days per week in the factory, while attending college one day per week
Training Outcome:
Paint Technician
Operations Lead
Employer Description:BEL Valves, part of the British Engines Group, is a global business with a strong brand delivered over 60 years.
BEL Valves offers design, manufacture, testing and aftermarket care of high integrity valves and actuators to critical offshore and onshore projects, within the oil and gas, power and renewables sectors.
Core activities are managed from the head office in Newcastle upon Tyne, with international projects supported from a local and satellite network.
Companies and products in the British Engines group include:
CMP Products – electrical cable glands, cable cleats and associated products
BEL Engineering – engineering service provider of sub-contract machining, assembly and test
Michell Bearings – hydrodynamic bearing manufacturer
Rotary Power – hydraulic motors and pumps, and hydraulic power units
BEL Valves – high integrity valves, actuators and controls
Stephenson Gobin – electromagnetic clutches and brakes, and fire safety products
Stadium Export Service – export service and industrial packing solutions
Tyne Pressure Testing – specialist pressure testing facilities, testing to extreme pressuresWorking Hours :5 days a week. Pattern to be confirmed with the training schoolSkills: Communication skills,Organisation skills,Problem solving skills,Administrative skills,Team working,Initiative....Read more...
An apprentice welder fabricator at KGD will have duties including
Ability to read and understand technical drawings
Develop number and measurement skills
Welding using multiple processes in numerous materials
Cutting
Folding
Base-frame Fabrication and fabrication skills
Tank fabrication
Vessel fabrication
Pipework, fabrication and welding (site based and factory based )
Assembly skills – manufacturing maintenance
Inspection and testing skills
Manufacturing Sequences
Quality Assurance
Training:
Formal training is delivered at HWGTA, located in Hereford (HR4 9SX).
Depending on the vacancy title, you will be undertaking either a Level 2 or Level 3 apprenticeship.
Level 2 comprises of:
Duration approximately 18 months
Block release training which includes 1 day per week in a classroom setting to cover practical and theory aspects working to complete the following qualifications:
EAL Level 2 Diploma in Engineering Operations (Skills)
EAL Level 2 Certificate in Engineering Operations (Knowledge)
Level 3 comprises of:
Duration approximately 40-45 months.
Years 1/2 is a combination of off the job training at HWGTA Training Centre as well as training on site with your employer.
This includes 26-42 weeks within the training Centre plus 1 day per week in a classroom setting to cover practical and theory aspects and complete EAL Level 3 Diploma in Advanced Manufacturing Engineering - Development Knowledge
Years 3/4 based full time in company developing skills in preparation for the end point assessment to gain your Level 3 qualification.
You will receive monthly visits from your assigned Learning and Development Specialist, who will set you work, monitor your development and wellbeing, and discuss training sessions. They will also prepare you for your End Point Assessment.
Additional training for functional skills in English and Maths will be undertaken if needed.
There is also a five-day teambuilding residential trip that is held in the spring of each year offered to all apprentices on programme.Training Outcome:On successful completion of an apprenticeship with KGD you will be offered a full-time position within the company, this will include a Pension and Sickness scheme.
Structured routes up to management throughout the business.Employer Description:KGD are a UK based specialist in the design and manufacture of the highest quality packaged process plant equipment & pressure vessels for the oil and gas, petrochemical, power generation, pharmaceutical, nuclear, hydrogen, renewables and food industries.Working Hours :Monday - Friday, 08.00 - 16.30. Paid mid-morning break, half hour lunch break unpaid.Skills: Communication skills,Team working,Willing to learn,Good work ethic,Punctual,Honest,Respectful,Outgoing,Confident....Read more...
