We are currently seeking an experienced Mechanical Fitter with a strong background in the chemical manufacturing industry to join the team on a 6-month temporary contract, with the potential to become a permanent position for the right candidate. Based at the Accrington site, this Mechanical Fitter role is critical in supporting the maintenance, installation, and commissioning of mechanical equipment across the facility. The ideal Mechanical Fitter will bring hands-on expertise, a proactive approach to problem-solving, and a commitment to high safety and operational standards within a fast-paced industrial environment.
Role Overview for the Mechanical Fitter: As a Mechanical Fitter, you will play a crucial role in supporting the engineering team by performing both planned and unplanned maintenance on their COMAH regulated site.
Key Responsibilities of the Mechanical Fitter:
Work within the maintenance team to perform routine and non-routine tasks, including equipment repair, replacement, monitoring, inspections, and troubleshooting to minimise unplanned downtime.
Use mechanical engineering expertise to deliver solutions to complex challenges and support equipment installations across the site.
Support mechanical design, installation, and commissioning for small capital and revenue projects, contributing innovative and effective solutions.
Conduct risk assessments in line with Work Planning and Control / PETRA procedures, ensuring permit compliance and completing all required documentation.
Ensure compliance with Safety, Health, and Environmental (SHE) standards and drive continuous improvement through root cause analysis, SHE meetings, and implementation of corrective actions under change management protocols.
Required Qualifications & Experience needed for the Mechanical Fitter:
Level 3 qualification in Mechanical Engineering (or equivalent).
Previous experience in an industrial environment, ideally within the Chemical or Process Manufacturing industries; however, relevant experience from other industries will also be considered.
Hands-on experience with pipework, vessels, process lines, and pumps.
If you are a skilled and dedicated Mechanical Fitter looking to join a growing company and enjoy a rewarding work environment, we would love to hear from you.
To apply for the Mechanical Fitter role:
Please submit your CV for review.....Read more...
Mechanical Fitter
Stoke On Trent
£36’000 - £43’000 ( OTE £52'000) + Commission + Holidays + internal Training + External Training + ‘immediate Start’ + Company Van + Fuel Card + Pension
Have a passion for mechanical work? If so, this is a great chance to step into a Mechanical Fitter role within the calibration department. Work a varied role with a industry leader known for the quality of service covering a local patch. Have the chance to earn well through commision also!
My client offers calibration services to a variety of customers across the UK and due to growth they require a Mechanical Fitterto join this tight knit team where you will be looked after and treated how employees should be.
Your Role As A Mechanical Fitter Will Include
* Calibration On A Variety Of Equipment
* Mobile Role!
* Consistent Technical Training On Specific Company Equipment
* Progression Into Field / Senior Positions
As A Mechanical Fitter You Will Have:
* Mechanical Bias
* Field Service Engineering Experience / Workshop Engineer
* Clean Driving License
Keywords: Mecanical Fitter, Mechanic, Workshop Engineer, Calibration Engineer, Mechanical Engineer, Ex forces, Navy Engineer, Field Service Engineer, Mobile Engineer, Field Engineer, Garage Equipment, Hydraulics, Calibration Engineer, Technician, Engineer, Stafford, Stoke on trent, shropshire, Cannock
Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
--....Read more...
15% PENSION + ANNUAL BONUS + 33 HOLIDAYS + ONSITE SUBSIDISED CANTEEN + ONSITE GYM + VARIOUS OTHER HEALTH & WELLBEING BENEFITSThis Lead Mechanical Fitter vacancy is available with an award-winning organisation that has been ranked in the top 25 Manufacturing employers world-wide for the last 3 years. Since their establishment over 160 years ago, they have become a household name within a number of high-profile industries including Oil & Gas and Power Generation and now employ over 15,000 people across 180 facilities world-wide.Their UK flagship facility is based in LEEDS, just a few miles from the M1 & M62 motorways, meaning that the successful Lead Mechanical Fitter can easily commute from Wakefield, Bradford, Selby, Castleford, Pontefract, Huddersfield, Wetherby and Harrogate.Key responsibilities of the Lead Mechanical Fitter:
Working in an actively hands on Assistant Supervisory/Leading position within a Mechanical Fitting & Testing focused department
Preparing Rotating Machinery (Pumps, Gearboxes & Motors) for pre shipping testing by installing various mechanical equipment & instruments, this involves frequent use of overhead cranes to lift heavy equipment, tools & machines
Deputising for the Supervisor where necessary and offering support & guidance to colleagues
Consistently monitoring workload with a view of maintaining manufacturing schedules & job progress
Ensuring company policies, procedures and processes are consistently adhered to
Working Hours of the Lead Mechanical Fitter: 37 Hours per week working a regular day shift
Monday to Thursday – 07:00 to 15:30
Friday – 07:00 to 12:30
In return, the Lead Mechanical Fitter will receive:
Starting Salary: £40,156.00 (£20.87 per hour)
Holiday Entitlement: 33 Days including public holidays – rising to 38 days with continued service
Annual Bonus up to £1,700.00 per annum – subject to company performance
Pension Scheme: 15% Combined Contribution (9% Employer / 6% Employee)
Access to the onsite canteen (subsidised) and gym
Free onsite car parking
To apply for the Lead Mechanical Fitter position, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information....Read more...
MET Technician / Strip Fitter Role:
- up to £26 p/h + Bonus
- Overtime Available
- Permanent Role
- Pension and great company benefits
- Growing Bodyshop Group room for Training and progression.
Our client, a busy Accident Repair Centre in the Farnborough area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £26 p/h Bodyshop Farnborough
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician / MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Role:
- up to £26 p/h + Bonus
- Permanent Role
- Pension and great company benefits
- Growing Bodyshop Group room for Training and progression.
Our client, a busy Accident Repair Centre in the Beaconsfield area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £26 p/h Bodyshop Beaconsfield
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician / MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
Fitter Morley | Circa £15 an hr + Overtime (OTE up to you!) Days: Monday – Friday 40hrsThe Company This is a market-leading automotive engineering company that has experienced rapid growth and continues to secure long-term projects, with a full order book. Significant investment has been made into the modern manufacturing facility, creating excellent working conditions with high-quality equipment. Due to ongoing success, they are now looking to add an experienced Fitter to their growing team.
The Role – Fitter As a Fitter, you’ll be responsible for:
Installing systems such as hydraulics, compressors, mechanical systems and pneumatics.
Completing a variety of fitting tasks on specialist commercial and transport-related vehicles
We’d love to hear from you if you have experience as a:
Plant Fitter
Hydraulic or Compressor Engineer
Mechanical / Forklift Truck Engineer
Light Vehicle Technician
Or similar vehicle/mechanical fitting background
What’s on Offer:
Salary: £16 an hr DOE
Overtime available at x1.5 – OTE completely in your control
Standard Days: Monday – Friday
Modern workshop with first-class facilities
Free onsite parking
Permanent position with a secure and growing employer
If you are interested in this Fitter role, please apply now or contact Grace at E3 Recruitment....Read more...
Multiple Temporary Mechanical Assembly Fitter positions available with a growing Engineering organization based in Wakefield. Offering hourly rates up to £20.00, guaranteed overtime paid at 150%, 30-minute flexibility on start & finish times and the chance to work on bespoke, state-of-the-art projects. Established over 120 years ago, this impressive Engineering organization has diversified and is now a major supplier to a number of high-profile businesses operating in a variety of industries, including Chemical, FMCG and Steel Processing. In the past 2 years, this employer has made significant investment and now operates out of a brand new, purpose-built 75,000 sq ft facility, from which they provide end-to-end services from initial concept design to aftercare & servicing.This employer is based in WAKEFIELD, just a few minutes from the M1, meaning the successful Mechanical Assembly Fitter can easily commute from surrounding towns and cities, such as Leeds, Huddersfield, Castleford, Wakefield, Barnsley, Sheffield, Rotherham, Halifax and Dewsbury.Because of increased demand of their bespoke end-to-end services, they are now actively searching for Mechanical Assembly Fitters to join their team on a temporary basis.Key Responsibilities of the Mechanical Assembly Fitter include:
Working as part of a Skilled Engineering team, tasked with the accurate building of bespoke Automated Machinery
Reading, interpreting and working directly from engineering drawings to ensure that machines are built in-line with specifications
Building, assembling & installing a vast range of technologies onto bespoke automated machinery, including sub-assemblies, valves, hydraulics, pneumatics, robotics, conveyors, grabbers and many more
Details of the Mechanical Assembly Fitter position:
Renumeration: Up to £20.00 per hour / £39,000.00 per annum (pro-rata) depending on experience
Working Hours: 37.5 Hours per week, spread across a regular day shift – able to start 30 minutes: Monday to Thursday – 08:00 to 16:30 / Friday – 08:00 to 15:15
Overtime Always Available – Paid at 150% after 37.5 hours & 200% on Sundays (10 hours overtime per week easily achievable midweek)
Assignment Duration: 3 to 6 Months subject to company workload – potential to transfer to permanent (not guaranteed)
Immediate interviews and starts available
To apply for the Mechanical Assembly Fitter, please click “Apply Now” and attach a copy of your CV. Alternatively, please contact Callum Good at E3 Recruitment for more information.....Read more...
Assembly Fitter CleckheatonStarting salary circa £25K a year, Monday – Friday, overtime paid at x1.5, opportunity to build a career within the automotive industry, clear progression routes, growing company, modern workshop, free parking, permanent position.This Assembly Fitter role would involve removing vehicle modifications that have been previously installed on the vehicle.We are looking to train someone up into the automotive industry mainly focusing on the removal of parts, equipment and vehicle livery from decommissioned vehicles and refurbishing the equipment removed.We would encourage you to apply for the Assembly Fitter role if you have an interest in training up into the automotive industry, have any kind of mechanical background or enjoy hands on work.The successful Assembly Fitter will have experience with:
Mechanical fitting or working with Vehicles in some capacity
May have experience working in a breakers yard or salvage yard – removing vehicle parts using hand and power tools
Full training will be given
Benefits of the Assembly Fitter role:
Circa 25K (£12.50
Days Monday – Friday
Overtime paid at x1.5
Growing company
Modern workshop
Clear progression routes and ongoing development
Permanent position
Alternatively, if you want a private chat about the Assembly Fitter role before submitting your application then please call or email Grace Hudson-Morgan at E3 Recruitment ....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Up to £20 p/h + Bonus
- Permanent Role
- Pension and company Benefits.
Our client, a busy Accident Repair Centre in the Exeter area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £20 p/h Bodyshop Exeter
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Up to £23 p/h + Bonus
- Permanent Role
- Pension and company Benefits.
Our client, a busy Accident Repair Centre in the Milton Keynes area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £23 p/h Bodyshop Milton Keynes
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Salary up to £24 p/h + Bonus
- Company Benefits
- Family feel working environment
- Permanent role
Our client, a busy Bodyshop/Accident Repair Centre in the Dunstable area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £24 p/h + Bonus Bodyshop Dunstable
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Salary up to £19 p/h + Bonus
- 22 days holiday + Bank Holidays
- Permanent Role
Our client, a busy Bodyshop/Accident Repair Centre in the Hemingford Grey area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £19 p/h Bodyshop Hemingford Grey
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Up to £24 p/h + Bonus
- Permanent Role
- Pension and company Benefits.
Our client, a busy Accident Repair Centre in the Newmarket area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £24 p/h Bodyshop Newmarket
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
E3 Recruitment is proudly supporting a highly respected global organisation in hiring for a permanent Mechanical Fitter position based in Huddersfield.
Overview:
This role presents an exciting opportunity to join a globally recognised engineering leader supplying to key industries including Defence, Power Generation, and Oil & Gas. It’s an excellent chance for a Mechanical Fitter to secure a permanent role and contribute to innovative projects on a global scale.
Location:
Based in Huddersfield with convenient access to the M62, this site is easily commutable from Halifax, Bradford, Leeds, Rochdale, Oldham, Manchester, Wakefield, Barnsley, Rotherham, and Sheffield.
Key Responsibilities of the Mechanical Fitter:
Assembling high-value rotating equipment, gearboxes, and ancillaries
Working from detailed technical and engineering drawings
Using precision measuring tools, including internal and external micrometres
Accurately recording build data, including serial and cast numbers
Compiling shift handover notes and communicating progress effectively
Maintaining a safe and organised working environment with strong housekeeping standards
Taking personal responsibility for health and safety, including hazard reporting and use of PPE
Supporting installations and inspections when required
Experience Required:
Previous experience working in a medium to heavy engineering environment
Ideally experienced in building and stripping rotating equipment, gearbox systems, and associated components
Qualifications:
A recognised qualification in Mechanical Engineering (e.g. Apprenticeship, NVQ, HNC, HND, or equivalent)
Shifts Available:
Multiple shift patterns are available to suit different schedules:
Base Salary (Day Shift): £37,379
AM/PM Shifts: £44,107
Continental Days: £54,666
Continental Nights: £57,937
Holiday Entitlement: 33 days (including public holidays)
This is an ideal position for a Mechanical Fitter who values teamwork and continuous improvement within a supportive and diverse working environment. Joining this team offers the opportunity for secure, full-time employment with a global engineering organisation.
For more information, contact Andrew Joseph at E3 Recruitment or click Apply Now.
Please note: this Roles is subject to UK security and export control regulations. Eligibility may be affected by your nationality, previous citizenships, and place of birth. You must have the Right to Work in the UK and meet all necessary security clearance requirements to be considered.....Read more...
The MET Technician / Strip Fitter role:
ID: 186941
- Salary of up to £54,000 + Bonus
- Overtime Available
- Monday - Friday 45 hours flexible start and finish times
- Permanent Role
Our client, a busy Accident Repair Centre in the Little Baddow area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £54,000 Bodyshop Little Baddow
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Salary up to £24 p/h + Bonus + OT (if desired)
- Permanent - Mon to Fri 45 hrs per week
- 23 Days Holiday + Bank holidays
- Permanent Role
This role will be working a busy Bodyshop/Accident Repair Centre in the Ascot area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £24 p/h Bodyshop Ascot
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role:
- Salary of up to £24 p/h + Bonus with great company benefits
- Monday to Friday only - Permanent Role
- Ongoing training and development
Our client, a busy Accident Repair Centre in the Leatherhead area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £24 p/h Bodyshop Leatherhead
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Earning Circa £65,000 per annum
- 22 days holiday plus bank holidays increasing to 25 with time served.
- Fantastic company benefits on offer.
Our client, a busy Accident Repair Centre in the Addlestone area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam on 01202 552915 or piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £65k Bodyshop Addlestone
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role:
job id: 198802
- Salary of up to £57,000 per annum + Bonus
- Monday - Friday 45 Hours per week
- Flexible start and finish times
- Permanent Role
Our client, a busy Accident Repair Centre in the Thames Ditton area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £57k Bodyshop Thames Ditton
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role:
ID: 147573
- Salary of up to £26 p/h
- 45 hours flexible start and finish times
- Permanent Role
Our client, a busy Accident Repair Centre in the Colindale area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £26 p/h Bodyshop Colindale
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
The MET Technician / Strip Fitter role:
ID: 172262
- Basic Salary of up to £57,000 per annum + Bonus (OTE Circa £70k)
- OT Available
- Monday - Friday 45 hrs per week, flexible start and finish times
- Family Feel working Environment
- Permanent Role
Our client, a busy Accident Repair Centre in the Cranford area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £70k Bodyshop Cranford
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician
....Read more...
MET Technician / Strip Fitter Technician Vacancy:
- Salary up to £58,000 per annum plus bonus
- Hours: 40hrs p/w
- Permanent Role
- 22 days holiday plus bank holidays increasing to 25 with time served.
- Fantastic company benefits on offer
Our client, a busy Accident Repair Centre in the Thatcham area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have previous experience as an MET Technician
- ATA is advantageous but not essential
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam on 01202 552915 or piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £58k + Bonus Bodyshop Thatcham
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician....Read more...
MET Technician / Strip and Fit Vacancy:
Ref - 183633
- Basic up to £50,000 per annum
- Monday to Friday
- Company pension
- 25 days holiday plus bank holidays
- Perkbox - Access to hundreds of exclusive discounts and rewards
- MediCash - Free healthcare scheme
- Permanent role
Our client, who are a busy Bodyshop group are currently looking to expand their team with the addition of an experienced MET Technician in the Bradford area.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- 4 wheel alignment, Suspension work, GEO, diagnostics and all mechanical work
Ideal Requirements as a MET Technician / Strip Fitter:
- Have Previous experience as an MET Technician / Strip Fitter
- ATA/NVQ is advantageous but not essential
- Hybrid Trained
- ADAS Accredited
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Richard Haigh on 07590309374 / richard@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter Bodyshop Bradford - £50,000
MET Technician, Strip Fitter, Strip & Fit, Bodyshop Technician, MET Tech
....Read more...
MET Technician / Strip and Fit Vacancy:
JOB ID: 89383
- Up to £65,000 per annum
- Monday - Friday 40 hours per week
- 25 days holiday plus public holidays.
- Permanent role.
Our client, who are a busy Bodyshop group are currently looking to expand their team with the addition of an experienced MET Technician in the Whetstone area.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- 4 wheel alignment, Suspension work, GEO, diagnostics and all mechanical work
Ideal Requirements as a MET Technician / Strip Fitter:
- Have Previous experience as an MET Technician / Strip Fitter
- ATA/NVQ is advantageous but not essential
- Hybrid Trained
- ADAS Accredited
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Piam on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter Up to £65k Basic Whetstone
MET Technician, Strip Fitter, Strip & Fit, Bodyshop Technician, MET Tech
....Read more...
MET Technician / Strip and Fit Vacancy:
Ref - 184029
- Basic up to £45,000 per annum
- Monday to Friday
- Company pension
- 25 days holiday plus bank holidays
- Perkbox - Access to hundreds of exclusive discounts and rewards
- MediCash - Free healthcare scheme
- Permanent role
Our client, who are a busy Bodyshop group are currently looking to expand their team with the addition of an experienced MET Technician in the Chester area.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- 4 wheel alignment, Suspension work, GEO, diagnostics and all mechanical work
Ideal Requirements as a MET Technician / Strip Fitter:
- Have Previous experience as an MET Technician / Strip Fitter
- ATA/NVQ is advantageous but not essential
- Hybrid Trained
- ADAS Accredited
If you want to hear more about the MET Technician / Strip Fitter role, please send us your CV by clicking apply now or by contacting Richard Haigh on 07590309374 / richard@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter Bodyshop Chester - £45,000
MET Technician, Strip Fitter, Strip & Fit, Bodyshop Technician, MET Tech
....Read more...