£44,000 starting, Overtime paid at 150%, Door to Door payments, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits Wellness programme, Ongoing training and development The Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs.This HGV Technician role will be covering the Bath / Bristol area and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etcIf you have experience as an Heavy Goods Engineer, PSV Technician/Bus Mechanic, or Heavy Plant Fitter, we would be very keen to speak with you.Key Responsibilities of the HGV Technician
Carry out diagnostic analysis, repairs and preventative maintenance.
Deliver customer-facing product support with a professional approach.
Complete PDI inspections to ensure vehicles meet required standards.
Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies.
Complete all required paperwork accurately – including engineer reports, inspections, calibration checks and job sheets.
Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment.
Experience & Requirements for our HGV Technician
Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools.
Direct HGV Technician experience
Hands-on experience working with HGVs and specialist vehicles.
Competent with mechanical, hydraulic, pneumatic and electrical systems.
Full UK Driving Licence
City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous
If you are interested in this Mobile HGV Technician role, please apply now or contact Grace at E3 Recruitment....Read more...
£44,000 starting, Overtime paid at 150%, Door to Door payments, Company van and fuel card, Company pension plan, Phone and laptop, Travel benefits Wellness programme, Ongoing training and development The Mobile HGV Technician Role We are seeking a qualified and experienced Mobile HGV Technician to join a world-renowned, multinational company supporting the service, repair and maintenance of specialist HGVs.This HGV Technician role will be covering the Gloucester area and is working with an International Vehicle Manufacturer providing service and repair support for their vehicles in transport depots, airports, MOD Sites etcIf you have experience as an Heavy Goods Engineer, PSV Technician/Bus Mechanic, or Heavy Plant Fitter, we would be very keen to speak with you.Key Responsibilities of the HGV Technician
Carry out diagnostic analysis, repairs and preventative maintenance.
Deliver customer-facing product support with a professional approach.
Complete PDI inspections to ensure vehicles meet required standards.
Repair equipment and vehicles either in the depot or on-site, following manufacturer specifications and company policies.
Complete all required paperwork accurately – including engineer reports, inspections, calibration checks and job sheets.
Perform mechanical maintenance, testing and repairs on hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment.
Experience & Requirements for our HGV Technician
Proven background in auto-electrical fault diagnosis and repair, including use of diagnostic tools.
Direct HGV Technician experience
Hands-on experience working with HGVs and specialist vehicles.
Competent with mechanical, hydraulic, pneumatic and electrical systems.
Full UK Driving Licence
City & Guilds Level 3 in Vehicle Mechanical & Electronic Systems (or equivalent) is advantageous
If you are interested in this Mobile HGV Technician role, please apply now or contact Grace at E3 Recruitment....Read more...
Trainee Field Installation Engineer
Bristol£30,000 - £35,000 Basic + Full OEM Training + Training courses + Career Progression + Company Van + Fuel Card + Private Use + Tools + Holiday + Uniform + Laptop + Phone + Healthcare + Monday - Friday Role + Bonus
Progress your career now as a Field Installation Engineer where you'll receive full manufacturer training to become a specialist in the industry. On offer this the opportunity for this company to invest in technical training, on the job and trianing courses so you are able to grow in a varied role with consistent support.
This company manufactures vehicle wash systems for commercial and industrial settings. Due to continued growth, they are looking for an additional Field Installation Engineer to join their highly skilled team. Join now and secure the opportunity to work with cutting-edge technology and be part of an exciting journey.
The Trainee Field Installation Engineer Role Will Include: *Full OEM training *Installation of Vehicle Wash Systems * Mechanical & Electrical Assembly on Customer Sites * UK Wide Field Role – Covering Areas Between Scotland and Cornwall * Monday – Friday Work (Stay away required Monday - Wednesday)
The Successful Field Installation Engineer Will Have:* ANY Mechanical Background / Confident With Electrics*Happy to Travel and Stay Away Monday- Thursday *Full UK Driving Licence
Please Apply Or send your CV For Immediate Consideration.
Keywords: Trainee Field Installation Engineer, Field Installation Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Maintenance Engineer, Commissioning Engineer, Service Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Bristol, Bath, Weston-super-Mare, Clevedon, Portishead, Nailsea, Yate, Chipping Sodbury, Thornbury, Keynsham, Bradley Stoke, Filton, Patchway, Avonmouth, Portbury, Emersons Green, Kingswood, Winterbourne, Chepstow, Caldicot, Highbridge, Burnham-on-Sea, South Gloucestershire, North Somerset, Somerset, Gloucestershire.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Field Installation Engineer
Sheffield £30,000 - £35,000 Basic + Full OEM Training + Training courses + Career Progression + Company Van + Fuel Card + Private Use + Tools + Holiday + Uniform + Laptop + Phone + Healthcare + Monday - Friday Role + Bonus
Progress your career now as a Field Installation Engineer where you'll receive full manufacturer training to become a specialist in the industry. On offer this the opportunity for this company to invest in technical training, on the job and trianing courses so you are able to grow in a varied role with consistent support.
This company manufactures vehicle wash systems for commercial and industrial settings. Due to continued growth, they are looking for an additional Field Installation Engineer to join their highly skilled team. Join now and secure the opportunity to work with cutting-edge technology and be part of an exciting journey.
The Field Installation Engineer Role Will Include:
*Full OEM training *Installation of Vehicle Wash Systems * Mechanical & Electrical Assembly on Customer Sites * UK Wide Field Role – Covering Areas Between Scotland and Cornwall * Monday – Friday Work (Stay away required Monday - Wednesday)
The Successful Field Installation Engineer Will Have:
* ANY Mechanical Background / Confident With Electrics*Happy to Travel and Stay Away Monday- Thursday *Full UK Driving Licence
Please Apply Or send your CV For Immediate Consideration.
Keywords:Trainee Field Installation Engineer, Field Installation Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Maintenance Engineer, Commissioning Engineer, Service Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Scotland, England, Wales, UK Wide, Manchester, Birmingham, Bristol, Leeds, Sheffield, Newcastle, Glasgow, Edinburgh, Plymouth, Exeter,Cornwall,Aberdeen,Swansea,London,Oxford,Bicester
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at Future Engineering Recruitment to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
Field Installation Engineer
Newcastle£31,000 - £35,000 Basic + Full OEM Training + Training courses + Career Progression + Company Van + Fuel Card + Private Use + Tools + Holiday + Uniform + Laptop + Phone + Healthcare + Monday - Friday Role + Bonus
Progress your career now as a Field Installation Engineer where you'll receive full manufacturer training to become a specialist in the industry. On offer this the opportunity for this company to invest in technical training, on the job and trianing courses so you are able to grow in a varied role with consistent support.
This company manufactures vehicle wash systems for commercial and industrial settings. Due to continued growth, they are looking for an additional Field Installation Engineer to join their highly skilled team. Join now and secure the opportunity to work with cutting-edge technology and be part of an exciting journey.
The Field Installation Engineer Role Will Include: *Full OEM training *Installation of Vehicle Wash Systems * Mechanical & Electrical Assembly on Customer Sites * UK Wide Field Role – Covering Areas Between Scotland and Cornwall * Monday – Friday Work (Stay away required Monday - Wednesday)
The Successful Field Installation Engineer Will Have: * ANY Mechanical Background / Confident With Electrics*Happy to Travel and Stay Away Monday- Thursday *Full UK Driving Licence
Please Apply Or send your CV For Immediate Consideration.
Keywords:Trainee Field Installation Engineer, Field Installation Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Maintenance Engineer, Commissioning Engineer, Service Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Scotland, England, Wales, UK Wide, Manchester, Birmingham, Bristol, Leeds, Sheffield, Newcastle, Glasgow, Edinburgh, Plymouth, Exeter,Cornwall,Aberdeen,Swansea,London,Oxford,Bicester
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at Future Engineering Recruitment to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
Field Installation Engineer
Liverpool
£30,000 - £35,000 Basic + Full OEM Training + Additional Training Courses + Career Progression + Company Van + Fuel Card + Private Use + Tools + Holiday + Uniform + Laptop + Phone + Healthcare + Monday - Friday Role + Bonus
Progress your career as a Field Installation Engineer with a company that genuinely invests in its engineers with full manufacturer training alongside additional technical courses, giving you the opportunity to develop your skills and become a specialist within the industry. With consistent on-the-job support and clear progression opportunities, this role offers long-term career growth in a varied and hands-on environment.
This company manufactures vehicle wash systems for commercial and industrial settings. Due to continued growth, they are looking for an additional Field Installation Engineer to join their highly skilled team. This is a fantastic opportunity to work with cutting-edge technology while building a secure and rewarding career within a growing organisation.
The Field Installation Engineer Role Will Include: * Full OEM training * Installation of Vehicle Wash Systems * Mechanical & Electrical Assembly on Customer Sites * UK Wide Field Installation Role – Covering Areas Between Scotland and Cornwall * Stay away Monday-Thursday (costs covered
The Successful Field Installation Engineer Will Have:
*ANY Electrical / Mechanical Background (Confident with electrics /wiring / hand tools
*Happy to Travel and Stay Away When Required
*Full UK Driving Licence
Please Apply Or send your CV to For Immediate Consideration.
Keywords:Trainee Field Installation Engineer, Field Installation Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Maintenance Engineer, Commissioning Engineer, Service Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Scotland, England, Wales, UK Wide, Manchester, Birmingham, Bristol, Leeds, Sheffield, Newcastle, Glasgow, Edinburgh, Plymouth, Exeter, Cornwall,Liverpool
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Field Service EngineerAylesbury
£31,500 – £32,500 Basic + OTE £40,000 + Full OEM Training + Company Van + Fuel Card + Private Use + Tools + Healthcare + Bonus
Are you looking for a hands-on Field Service Engineer role where you can develop into a true technical specialist? This is an excellent opportunity to join a well-established manufacturer offering full OEM training, allowing you to build specialist knowledge and progress within a stable industry. If you enjoy fault finding, problem solving and working with your hands in a varied field-based role, this position offers genuine job satisfaction along with long-term career stability.
You will be working on high-quality commercial vehicle wash systems across a range of industrial and commercial sites, gaining in-depth technical training while being fully supported by an experienced engineering team. This is a Monday–Friday role designed to provide both career development and a strong work-life balance.
The Field Service Engineer Role Will Include:
Full. OEM Manufacturer training
Service, repair, maintenance and breakdown work on commercial vehicle wash systems
Field-based role covering the Aylesbury area
The Successful Field Service Engineer Will Have:
A mechanical background (comfortable using hand tools)
Confidence working with basic electrics
Full UK driving licence
Willingness to travel within the Aylesbury area
If you are looking for a stable, technical role where you can develop specialist skills and gain real job satisfaction, please apply or send your CV to for immediate consideration.
Keywords: Trainee Field Service Engineer, Field Service Engineer, Service Engineer, Maintenance Engineer, Electrical Engineer, Mechanical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Installation Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Automatic Door Engineer, Aylesbury, Buckinghamshire, High Wycombe, Bicester, Thame, Princes Risborough, Leighton Buzzard, Tring, Chesham, Amersham, Buckingham, Milton Keynes, HP20, HP21, HP22.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are those of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal right to work in the United Kingdom. Applications from candidates without this right will not be processed. Due to the high volume of applications, only shortlisted candidates will be contacted.....Read more...
Join a world-renowned multinational and take your HGV career on the road.Work with specialist vehicles, earn up to £44,000, and enjoy real autonomy in a mobile role.Excellent overtime, strong benefits, and long-term progression with a market leader.
This is a fantastic opportunity for an experienced Mobile HGV Technician, HGV Mechanic, PSV Technician, or Plant Fitter looking for a stable, well-paid role with a respected global business.Role Details
Job Title: Mobile HGV Technician
Location: East/West London, Essex – Field Based
Salary: Up to £44,000 per annum
Hours: 8:30am – 6:30pm, Monday to Friday
Overtime: x1.5
The Role As a Mobile HGV Technician, you will be responsible for the service, maintenance, and repair of specialist HGVs, both on customer sites and at depot level. This is a customer-facing position where professionalism, technical expertise, and pride in your work are key.Key Responsibilities
Carry out diagnostic analysis, repairs, and preventative maintenance
Provide a high-quality, customer-facing technical support service
Complete PDI inspections and planned maintenance activities
Repair vehicles and equipment on-site or at depot in line with manufacturer and company standards
Handover equipment to customers and demonstrate safe operation procedures
Accurately complete all paperwork including job sheets, inspection reports, and calibrations
Act as a professional ambassador for the business at all times
Perform mechanical maintenance, testing, and repairs on:
Hydraulic systems
Pneumatic systems
Pumps, compressors, motors, and ancillary equipment
Read and interpret schematic drawings
Skills & Experience Required
Proven experience in auto-electrical fault diagnosis and repair
Confident using electronic diagnostic equipment
Hands-on experience with HGVs or specialist vehicles
Backgrounds considered:
Mobile HGV Technician / HGV Mechanic or workshop based
PSV Technician / Bus Mechanic
Heavy Plant Fitter
Desirable – Experience working with Distribution Tractors, Ro-Ro Tractors and other specialist vehicles.
Additional Requirements
Full UK Driving Licence
Strong work ethic and positive attitude
Willingness to learn and develop new skills
City & Guilds Level 3 – Vehicle Mechanical & Electronic Systems (Maintenance & Repair) or equivalent (advantageous)
What’s On Offer
Competitive salary up to £44,000 plus overtime
Secure, full-time position with a market-leading company
Supportive team environment with ongoing training
Excellent benefits package including:
Company pension scheme
Cycle-to-work scheme
Free or subsidised travel
Wellness programme
Ongoing training and clear career progression
For more information about the Mobile HGV Technician role, please contact Sophie Ranson at E3 Recruitment.....Read more...
As an REW apprentice, your 3.5-year development programme will be made up of various specialised engineering sections and departments, all based in West London (Acton), including electrical, electronic, mechanical and the Train Modification Unit. Our aim is to equip you with the range of skills and experience you need for a successful career. We also understand that everyone’s career is different, so every apprentice’s journey is unique
Training:
EW Apprentices will spend year 1 in block release at college in the Enfield area, interspersed with targeted safety training courses and placements around the workshops to familiarise them with their future working environment
REW apprentices will also spend some part of year 2 back in block release at college with placements around their schedule
Training Outcome:
Upon successful completion of this scheme, you could roll off into the role of Electrical / Mechanical Fitter, which could lead to further career development opportunities such as Team Leader, Production Manager or Operational Manager
You will also have opportunities to complete additional training courses. These will vary from soft skills training to technical skills training
Employer Description:At TfL, our work goes beyond transport. We keep London moving – day in, day out. We’re about building stronger connections, and helping people do more of what they love. From sustainable futures to post-pandemic economic recovery, we’re constantly breaking new ground, and taking innovation to new heights. For our people, this is more than just a job. Our apprentices are pioneers, frontrunners, and mentors. And, with a culture built on support and flexibility that puts wellbeing first.Working Hours :You may be required to work shift hours. Days and times to be confirmed.Skills: Communication skills,Customer care skills,Team working,Innovative....Read more...
You will be involved in the following during your time at VA Technology:
Reading mechanical and electrical drawings
Using and communicating technical information
Building systems and equipment
Testing and validation of systems and equipment
Supporting the development of robot and PLC software
Using computer software packages to assist with engineering activities
Fault finding and diagnostics of mechanical and electrical equipment
Preparing and fabrication of metal components for machine assembly
Operating machinery such as press brakes, saw, drills and welding
Using hand tools such as drilling, grinding and finishing
Supporting the construction of control panels and equipment
Be familiar with risk assessments and typical health & safety matters in the workplace
Operate within company procedures and policies
Ensuring quality standards are met
Working efficiently and effectively in an engineering environment
Training:
This is a Level 3 Fitter apprenticeship, delivered over a 27 month period
The apprentice will attend the training centre, In-Comm Training Services in Telford, TF3 3AJ, for the first 10-months
As part of the apprenticeship, there will be opportunity to start a level 4 HNC qualification in year two
Training Outcome:
Full-time opportunity to work at V A Technology
Opportunity for progression and further training and development within the business
Opportunity for those who have the desire to travel worldwide
Overtime
Employer Description:With a relentless commitment to excellence in mechanical, electrical, control, software and systems design, we have delivered a vast range of systems and technologies, ultimately helping to transform ceramic mold manufacturing from art-form to industrialised process. VA Technology is known worldwide for its innovative, technologically advanced shellroom systems and equipment. With extensive experience in the design, manufacture, installation and service of complete shell manufacturing systems throughout the investment casting industry, we pride ourselves in our bespoke solutions and on-going support, tailored to meet our customer’s needs.Working Hours :Start and Finish times whilst at In-Comm
Monday to Thursday 9am - 4:30pm, Friday 9am - 2:30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Non judgemental,Patience,Interest in Engineering....Read more...
Field Service Engineer
Birmingham£34,000 - £36,000 Basic + Full OEM Training + Company Van + Fuel Card + Private Use + Tools + Job Satisfaction + Stability + Work life balance + Holiday + Healthcare + Monday - Friday role + Bonus
Solidify your career now as a Field Service Engineer where you'll receive full manufacturer training to become a specialist in the industry and have everyday job satisfaction. You'll benefit from a great work life balance, with the opportunity to grow in a varied role with consistent on the job training and support. Join now and enjoy long term stability where you will be looked after long term, accompanied by a fantastic package!
This company manufactures vehicle wash systems for commercial and industrial settings. Due to further growth, they are looking for an additional Field Service Engineer to join their highly skilled team. Join now and secure the opportunity to work with cutting edge technology and be part of an exciting journey.
The Field Service Engineer Role Will include: * Full OEM training * Service, Repairs, Maintenance & Breakdowns Of Vehicle Wash Systems * Field Service Role Covering The Birmingham areaThe Successful Field Service Engineer Will Have: * ANY Mechanical Background Considered * Confident with electrics * Hand tool experience with electrical understanding * Happy To Cover The Birmingham Area * Full driving licence
Please Apply Or send your CV For Immediate Consideration.
Keywords: Trainee Field Service Engineer, Field Service Engineer, Heavy Field Service Engineer, Commercial Vehicle Engineer, HGV Engineer, PSV Engineer, Bus Engineer, LCV Engineer, Plant Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical, Mechanical Fitter, Maintenance Engineer, Installation Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Midlands, West Midlands, Birmingham, Coventry, Wolverhampton, Dudley, Walsall, Solihull, West Bromwich, Tamworth, Redditch, Bromsgrove, Cannock,Nuneaton, Rugby, B31, B32, B33, B34, B35, B36, B37, B38, B40, CV1, CV2, CV3, CV4, CV5, CV6, CV7, CV8, WV1, WV2, WV3, WV4, WV5, WV6This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at Future Engineering Recruitment to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants; however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted....Read more...
We offer two exciting pathways: Fitter and Machinist, each with its own focus and opportunities.
Fitter - Fitters put together components & sub-assemblies that go into the aircraft on our customers’ final assembly lines. Fitters work to manufacturing & engineering instructions/drawings & will use skills including drilling, reaming & countersinking; Riveting & bolting; Using automated/robotic drilling equipment; Functional testing of mechanical systems
Machinist - Our Integrated Machining Facility at Western Approach focuses on the manufacture of composite wing spars. Skills/knowledge developed will include operating 3, 4 & 5 axis CNC Milling machine tools; Operating co-ordinate measuring machines (CMM), conventional & digital measuring equipment; Understanding processes, procedures & engineering drawings
Programme Structure:
Year 1 - is all about getting you ready to hit the ground running. You’ll build the core skills, knowledge, and confidence you need to succeed in years 2&3 - with the right mix of learning, support, and hands-on prep to make it happen. You'll split your time working offsite at college completing your foundation training as well as working onsite
Years 2 & 3 - You’ll rotate through different areas of the business, gaining hands-on experience and expanding your knowledge along the way. You’ll have regular check-ins with your GKN training advisor to track your progress, all while continuing your college studies one day a week
Year 4 - In your final placement, you’ll focus on your final department, build specialist skills, and complete your final assessments - all leading to your apprenticeship qualification
Training:Aerospace Engineering Technician Level 3.
Year 1 - is all about getting you ready to hit the ground running. You’ll build the core skills, knowledge, and confidence you need to succeed in years 2&3 - with the right mix of learning, support, and hands-on prep to make it happen. You'll split your time working offsite at Weston college completing your foundation training as well as working onsite
Years 2 & 3 - You’ll rotate through different areas of the business, gaining hands-on experience and expanding your knowledge along the way. You’ll have regular check-ins with your GKN training advisor to track your progress, all while continuing your college studies one day a week
Year 4 - In your final placement, you’ll focus on your final department, build specialist skills, and complete your final assessments - all leading to your apprenticeship qualification
Training Outcome:Skilled Aircraft Fitter, Machinist or Maintenance Technician.Employer Description:GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career.Working Hours :Monday to Friday, 07:30 - 15:30Skills: Problem solving skills,Team working,Willingness to learn,Positive attitude,Curiosity....Read more...
Job Title: FITTERDepartment: Fitting ShopsUtile Engineering is a leading manufacturers of air and gas compressors, vacuum pumps and gas boosters. We are currently seeking a Fitter to join our team in Irthlingborough.Main Purpose of Job: To prepare, assemble and test company products and sub assemblies. Relationships: a) Responsible to: Operations Manager / Section Supervisor b) Responsible for: Quality and Standards of Products c) Location: Factory - Fitting ShopMain Tasks of Job:
To kit up and prepare all components for assembly.To build a range of pumps or sub assemblies to company standards and specifications.Set up and run tests on the range of pumps, using various test methods and rigs, as required by company specifications.Rectify, modify or repair any fault occurring during assembly and test, as required.To work on customer’s site if required.Undertake basic machining operations as required by the job or workload.Undertake all mechanical and manual lifting in a safe manner including slinging, weight estimation and manual handling.Work from and interpret engineering drawings and use inspection/measuring equipment to company standards.Allocate and store components to various areas within the factory (i.e. storage).Ensure work area is cleaned and tidied on a routine basis.Complete any documentation relevant to the department on a routine basis, as required.Comply with all Health and Safety Regulations within the company.
The above is not an exhaustive list of duties and you will be expected to perform different tasks as dictated by your changing role within the organisation and the overall business objectives of the organisation. Any other reasonable tasks by mutual agreement.If this sounds like the opportunity for you, please apply ASAP.....Read more...
Field Service Engineer
Oxford
£31,500 - £32,500 Basic + (OTE £40,000) + Full OEM Training + Stability + Job satisfaction Work life balance + Company Van + Fuel Card + Private Use + Tools + Healthcare + Bonus + Pay reviews + Uniform + Laptop + Phone
Are you looking for a technical, hands-on Field Service Engineer role where you can become a true specialist and enjoy everyday job satisfaction? This is a fantastic opportunity to join a well-established manufacturer offering full OEM and on-the-job training, giving you the chance to develop into an industry specialist. If you enjoy fault finding, problem solving, and working with your hands in a varied field-based role, this position offers genuine job satisfaction and long-term stability within a close-knit, supportive team.
You’ll work on high-quality commercial vehicle wash systems, building strong technical knowledge while receiving ongoing support from experienced engineers. The role is Monday to Friday, with a 1-in-3 call-out rota paid at a premium rate on top of your basic salary.
The Field Service Engineer Role Will Include:
*Full OEM manufacturer training to become a technical specialist
* Hands-on service, repairs, maintenance & breakdown work on commercial vehicle wash systems
* Electrical and mechanical fault finding
* Field-based role covering the Oxford area
* Working independently while being supported by a strong technical team
The Successful Field Service Engineer Will Have:
* Mechanical background (Minimum hand tools).
* Comfortable / confident working with electrics
* Experience in service, maintenance or installation roles (preferred but not essential)
* Full UK driving licence
* Happy to cover the Oxford area
If you’re looking for a stable, technical role where you can become a specialist and gain real job satisfaction, please apply or send your CV for immediate consideration.
Keywords:Trainee Field Service Engineer, Field Service Engineer, Service Engineer, Maintenance Engineer, Electrical Engineer, Mechanical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Installation Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Automatic Door Engineer, Oxford, Oxfordshire, Abingdon, Bicester, Banbury, Witney, Kidlington, Didcot, Wantage, Thame, Carterton, Chipping Norton, Wallingford, Henley-on-Thames, OX1, OX2, OX3, OX4, OX5, OX7, OX9, OX10, OX11, OX12, OX13, OX14, OX15, OX16, OX17, OX18, OX20, OX25, OX26, OX28, OX29
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Applications from candidates without this right will not be processed.....Read more...
Field Installation Engineer
UK Wide
£30,000 - £35,000 Basic + Full OEM Training + Additional Training Courses + Career Progression + Company Van + Fuel Card + Private Use + Tools + Holiday + Uniform + Laptop + Phone + Healthcare + Monday - Friday Role + Bonus
Progress your career as a Field Installation Engineer with a company that genuinely invests in its engineers with full manufacturer training alongside additional technical courses, giving you the opportunity to develop your skills and become a specialist within the industry. With consistent on-the-job support and clear progression opportunities, this role offers long-term career growth in a varied and hands-on environment.
This company manufactures vehicle wash systems for commercial and industrial settings. Due to continued growth, they are looking for an additional Field Installation Engineer to join their highly skilled team. This is a fantastic opportunity to work with cutting-edge technology while building a secure and rewarding career within a growing organisation.
The Field Installation Engineer Role Will Include:
* Full OEM training
* Installation of Vehicle Wash Systems
* Mechanical & Electrical Assembly on Customer Sites
* UK Wide Field Installation Role – Covering Areas Between Scotland and Cornwall
* Stay away Monday-Thursday (costs covered
The Successful Field Installation Engineer Will Have:
ANY Electrical / Mechanical Background (Confident with electrics /wiring / hand tools)
Happy to Travel and Stay Away When Required
Full UK Driving Licence
Please Apply Or send your CV to For Immediate Consideration.
Keywords:Trainee Field Installation Engineer, Field Installation Engineer, Installation Engineer, Mechanical Engineer, Electrical Engineer, Electro-Mechanical Engineer, Mechanical Fitter, Maintenance Engineer, Commissioning Engineer, Service Engineer, Diesel Engineer, Fleet Engineer, Fault Finding, Service & Maintenance, Commercial Vehicles, Heavy Equipment, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Appliance Engineer, Gaming Engineer, Automatic Door Engineer, Scotland, England, Wales, UK Wide, Manchester, Birmingham, Bristol, Leeds, Sheffield, Newcastle, Glasgow, Edinburgh, Plymouth, Exeter, Cornwall
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
As a Fitter Apprentice, you will gain experience across a variety of Operation disciplines in which a personal development plan will be created for your learning and development needs associated to your role.
This includes bespoke technical training within Operations and shop floor placements around the business, providing practical exposure to the development of mechanical and electrical systems within the aerospace industry, with particular focus on Air to Air Refuelling and Actuation.
During the final year of the Apprenticeship, Apprentices will move into a year long placement in an area that suits your strengths and interests, building on the skills you’ve developed during your first three years on site.
Throughout your Apprenticeship, you will learn how to work from Engineering drawings and technical documentation to carry out assembly, installation, testing and fault finding tasks.
You’ll be fully trained in how to follow:
Engineering procedures and safety requirements, and will be working both independently and as part of a supportive team
You will develop practical fitting and assembly skills, including the use of hand tools, measuring equipment, inspection techniques, and electrical/electronic test methods
By the end of the programme, you will be confident working with minimal supervision, taking responsibility for the quality of your work, proactively finding solutions to problems and contributing to continuous improvement activities.
You will leave the Apprenticeship scheme with the skills, knowledge, and experience needed to begin your career as a fully qualified Mechanical Fitter.
The structure of the Apprenticeship programme will be as follows:
Year 1 - 2 - During your first 2 years, you will combine work based learning whilst attending day release at Bournemouth and Poole College, where you will study towards the Level 3 Advanced Manufacturing (Development Knowledge) qualification through classroom based education
While on site, you will take part in shop floor based rotational placements designed to give you a broader understanding of the business and to support the requirements of your college curriculum
Rotation placement examples include spending time within our emergency missile and actuation testing facility, assembly, testing, and maintenance of air refuelling pods and validating of parts to ensure they meet aerospace standards
Year 3 - Predominately work based at Eaton Mission Systems Division, Wimborne with 1 day per week day release to Bournemouth and Poole College to complete year three of the Level 3 Advanced Manufacturing (Development Knowledge) Technical Certificate
Rotations will be a combination of 3 or 4.5 months placements within our Operations function to increase knowledge and skills and to gain experience in a variety of areas across the business that support our shop floors teams
Placements will include time spent within our UK Aerospace Additive Manufacturing Centre of Excellence, Manufacturing Engineering and gaining an insight into our After Market repairs services. Year 4 - In your final year, you will be based full time at Eaton Mission Systems Division in Wimborne, completing a dedicated year long placement within a team that aligns with the strengths and interests you have demonstrated throughout your first three years
During this time, you will continue to build your portfolio of work based experience in preparation for the mandatory End Point Assessment, an independent evaluation that confirms you have achieved the skills, knowledge and behaviours outlined in the Apprenticeship Standard
This final placement gives you the opportunity to apply what you’ve learned, further develop your abilities, and confidently progress toward a full time career within your chosen area
Training:Level 3 Engineering Fitter Apprenticeship Standard
https://www.instituteforapprenticeships.org/apprenticeship-standards/st0432-v1-4 Personal Development ProgrammeTraining Outcome:
Progression to Full Time employment, Progression to a higher level apprenticeship/further training
Employer Description:Join Eaton and be a part of our commitment to providing impactful, energy efficient solutions that shape a sustainable future. At Eaton, we make what matters work, and we're dedicated to a workplace where ethics, inclusion, diversity, and our people are at the forefront. Located in Wimborne, Dorset, Eaton's Aerospace division is a global leader in aerospace fuel systems, renowned for delivering fully integrated solutions for both fixed and rotary wing aircraft. Our Wimborne facility specialises in cutting edge air to air refuelling systems, advanced refuelling probes, air to air and air to ground launch systems utilising both pneumatic and pyrotechnic ejection technologies, as well as a range of Defensive Aids Sub Systems. With over 90 years of industry experience, we are recognised as the world’s leading provider of air to air refuelling systems, offering fifth generation solutions to Air Forces worldwide. Our legacy of innovation and technical excellence sets us apart as the most advanced air to air refuelling supplier on the globeWorking Hours :Monday - Friday. Some placements may include the requirement to be on an early/late shift patternSkills: Administrative skills,Analytical skills,Attention to detail,Communication skills,Customer care skills,Ethical,Initiative,IT skills,Logical,Non judgemental,Number skills,Organisation skills,Patience,Presentation skills,Problem solving skills,Team working....Read more...
An exciting opportunity has arisen for an HGV Technician to join a well-established company providing advanced diagnostic, servicing, and repair solutions for commercial trucks.
As an HGV Technician, you will be responsible for keeping a fleet of heavy vehicles in optimal condition through repairs, servicing, and component refurbishment.
This full-time permanent role offers a salary of £51,800 and benefits.
You will be responsible for:
? Performing routine maintenance and detailed repairs on heavy goods vehicles, including engine, brakes, transmission, suspension, and electrical systems.
? Diagnosing faults using schematics and electrical testing equipment.
? Fabricating, welding, and modifying components as required.
? Operating power tools and specialised equipment to complete tasks efficiently.
? Assisting with assembly and installation during vehicle refurbishment.
? Maintaining auxiliary equipment such as forklifts and excavators.
? Ensuring all work meets safety standards and technical specifications.
? Keeping accurate records of repairs, inspections, and maintenance activities.
What we are looking for:
? Previously worked as an HGV Technician, HGV Mechanic, HGV Fitter, Commercial Vehicle Technician, Trailer Technician, Truck Technician, Trailer mechanic, Truck mechanic or in a similar role.
? At least 5 years of experience in repairing and maintaining HGVs and municipal vehicles.
? NVQ Level 3 or equivalent in Heavy Goods Vehicle Maintenance.
? Successfully completed a certified apprenticeship program.
? Strong mechanical and electrical knowledge, with the ability to read schematics and technical diagrams.
? Experience in fabrication, welding, soldering, and the use of hand and power tools.
? Ability to safely handle heavy lifting and machinery repairs.
? Experience with auxiliary equipment maintenance, including excavators and forklifts.
What's on offer:
? Competitive salary.
? Overtime (paid at 1.5x)
? Company ....Read more...
Assist maintenance technicians with planned preventive maintenance on production machinery
Support fault‑finding and basic troubleshooting on mechanical and electrical equipment
Learn to safely use tools, test equipment, and maintenance systems under supervision
Help with equipment installation, setup, and calibration
Perform routine inspections and reporting equipment issues
Support continuous‑improvement and reliability activities as directed by engineering staff
Complete 3M training and development modules related to site safety, maintenance practices, and technical skills
Maintain accurate maintenance records and documentation.
Contribute to continuous improvement initiatives focused on safety, quality, and productivity
Follow all 3M safety procedures, regulatory requirements, and site standards
Training:
The majority of your apprenticeship will be spent in the workplace, where you will gain valuable hands-on experience and develop practical skills through on-the-job learning
Training Outcome:
Maintenance Technician, Mechanical Fitter, Electrical Maintenance Technician, Multi-Skilled Maintenance Engineer
Further progression may include moving into supervisory roles, higher-level technical positions, or specialising in areas such as automation, manufacturing systems, or condition monitoring
This apprenticeship provides a strong foundation for a long-term, rewarding career within the engineering and manufacturing industries
Employer Description:In an exciting development for local industry, Invest Training has teamed up with 3M Newton Aycliffe to recruit and train a Level 3 Maintenance Operations and Engineering Technician. This partnership bridges the gap between high-level vocational education and practical industrial application, offering a unique opportunity for an apprentice to gain hands-on experience at one of the world's most innovative manufacturing firms. The role focuses on ensuring the safety and efficiency of complex plant machinery, integrating core engineering disciplines with the rigorous health and safety standards that both Invest Training and 3M prioritise.Working Hours :Year 1: Monday - Thursday, 9.00am - 4.00pm at NC Group, Friday, 9.00am - 2.00pm at 3M / NC Group.
Years 2 - 4: Monday - Thursday, 7.00am - 3.00pm, Friday, 7.00am - 2.00pm.
Potential for shift work in year 4.Skills: Attention to detail,Problem solving skills,Number skills,Team working....Read more...
An exciting opportunity has arisen for a Crane Service Engineer / Hydraulic Engineer to join a well-established crane business specialising in designing, supplying, servicing and repairing lorry-loader cranes.
As a Crane Service Engineer / Hydraulic Engineer, you will be responsible for servicing, maintaining, and troubleshooting hydraulic crane systems.
This full-time permanent role offers a salary of up to £50,000 and benefits.
You will be responsible for
? Servicing, repairing, and maintaining mobile hydraulic cranes.
? Conducting inspections, testing, and certification of lifting equipment.
? Diagnosing and resolving hydraulic and electrical faults.
? Assembling and servicing hydraulic hoses
? Providing roadside and on-site breakdown support.
? Working flexibly on and off client premises.
What we are looking for
? Previously worked as a Crane Service Engineer, Hydraulic Engineer, Crane Engineer, Heavy Plant Fitter, Heavy Plant Engineer, Plant Technician, Hydraulic Mechanic, Hydraulic Technician, crane technician, Crane service technician, Plant Mechanic, Hydraulic Mechanic or in a similar role.
? Have at least 1 year of experience working with hydraulic cranes.
? Background working with hydraulic machinery, plant equipment, or mobile cranes.
? Strong understanding of mechanical, hydraulic, and electrical systems.
? Right to work in the UK.
? Full UK driving licence.
What's on offer
? Competitive salary
? Opportunities for overtime
? Company vehicle provided
? Pension scheme
? Casual dress code
? Flexible working options
? On-site parking
This is a fantastic opportunity for an experienced Crane Service Engineer / Hydraulic Engineer to develop their career with a supportive engineering team.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to th....Read more...
An exciting opportunity has arisen for a Crane Service Engineer / Hydraulic Engineer to join a well-established crane business specialising in designing, supplying, servicing and repairing lorry-loader cranes.
As a Crane Service Engineer / Hydraulic Engineer, you will be responsible for servicing, maintaining, and troubleshooting hydraulic crane systems.
This full-time permanent role (40 hours per week) offers a salary of up to £50,000 and benefits.
You will be responsible for
? Servicing, repairing, and maintaining mobile hydraulic cranes.
? Conducting inspections, testing, and certification of lifting equipment.
? Diagnosing and resolving hydraulic and electrical faults.
? Assembling and servicing hydraulic hoses
? Providing roadside and on-site breakdown support.
? Working flexibly on and off client premises.
What we are looking for
? Previously worked as a Crane Service Engineer, Hydraulic Engineer, Crane Engineer, Heavy Plant Fitter, Heavy Plant Engineer, Plant Technician, Hydraulic Mechanic, Hydraulic Technician, crane technician, Crane service technician, Plant Mechanic, Hydraulic Mechanic or in a similar role.
? Have at least 1 year of experience working with hydraulic cranes.
? Background working with hydraulic machinery, plant equipment, or mobile cranes.
? Strong understanding of mechanical, hydraulic, and electrical systems.
? Right to work in the UK.
? Full UK driving licence.
What's on offer
? Competitive salary
? Opportunities for overtime
? Company vehicle provided
? Pension scheme
? Casual dress code
? Flexible working options
? On-site parking
This is a fantastic opportunity for an experienced Crane Service Engineer / Hydraulic Engineer to develop their career with a supportive engineering team.
Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact y....Read more...
An opportunity has arisen for an HGV Technician to join a well-established commercial vehicle dealership, delivering high-quality maintenance and repair solutions.
As an HGV Technician, you will carry out diagnostics, servicing, and repairs on heavy commercial vehicles while ensuring work meets manufacturer standards.
This full-time permanent role offers a basic salary of up to £45,000, OTE £64,000 and benefits.
You will be responsible for:
? Diagnosing mechanical and electrical faults using manufacturer-approved diagnostic equipment
? Carrying out servicing, routine maintenance, and repair work on commercial vehicles
? Reviewing job instructions to confirm the agreed work and liaising with the service team where clarification is needed
? Identifying additional issues during inspection and reporting these to the workshop management team
? Performing final quality checks following repair or servicing work
? Ensuring vehicles on site are handled carefully and maintained to professional standards
? Adhering to company policies, statutory regulations, and health and safety procedures
What we are looking for
? Previously worked as an HGV Mechanic, HGV Technician, Diagnostic Technician, Commercial Vehicle Technician, HGV FItter, Truck Technician, Truck mechanic or in a similar role.
? Have Level 2 or Level 3 qualification
? Proven experience working on commercial vehicles
? Ideally have time served experience of 5 years as technician
? Strong diagnostic and fault-finding capability
? Ability to interpret manufacturer manuals, guidance, and digital systems
? Competent with workshop systems and computers for completing job cards and accessing technical information
Split shift (alternating weeks):
? Shift 1: Mon-Fri, 6am - 3pm
? Shift 2: Mon-Fri, 1pm - 10pm
? 1 in 3 Saturday, 7am - 12pm
What's on offer
? Competitive salary
? Productivity bonus
? Overtime opportunities, including weekends
? 30 days annual leave including ....Read more...
Diagnostic Technician - Swindon - Vehicle Technician
Location - Swindon
Salary - £33,000 - £45,000
Job Title - Vehicle Technician
We are working with a franchised Volume brand dealership in the Swindon area who are looking for an experienced Vehicle Technician to join their busy Service Department
The Vehicle Technician role comes with a basic salary of between £33000 - £45000 with fantastic opportunities for progression.
Key Vehicle Technician Roles and Responsibilities:
- Undertake maintenance, service, and repair activities on motor vehicles to the highest standard
- As the Vehicle Technician Carry out all work completely and effectively whilst adhering to manufacturers scheduled times to maintain efficiency
- Effectively record details of diagnosis, work completed, and components utilised in line with group and manufacturer standards
Minimum Vehicle Technician Requirements:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Technician (or similar)
- Good technical knowledge
- Must have a Driving License
If you want to hear more about the Vehicle Technician role, please send us your CV by clicking apply now or by contacting Rachael on 07885881841 or send your up to date CV to rachael.mortimer@holtrecruitment.com to discuss further.
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
....Read more...
Vehicle Technician - Swansea - Vehicle Technician
Location - Swansea
Job Title - Vehicle Technician
Salary - £26,000 - £28,000 - £34,000 OTE
We are working with a Volume dealership in the Swansea area who are looking for an experienced Vehicle Technician to join their busy Service Department in Swansea.
The Vehicle Technician role comes with a basic salary of £26,000 - £28,000 - £34,000 OTE with fantastic opportunities for progression.
- Hours: 40
- OTE £6,000
Key Vehicle Technician Roles and Responsibilities:
- Undertake maintenance, service, and repair activities on motor vehicles to the highest standard
- As the Vehicle Technician you will carry out all work completely and effectively whilst adhering to manufacturers scheduled times to maintain efficiency
- Effectively record details of diagnosis, work completed, and components utilised in line with group and manufacturer standards
Minimum Vehicle Technician Requirements:
- Qualified to NVQ level 3 (or equivalent)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Vehicle Technician (or similar)
- Must have a Driving License
If you want to hear more about the Vehicle Technician role, please send us your CV by clicking apply now or by contacting Rachael Mortimer on +44 7885 881841 or rachael.mortimer@holtrecruitment.com.
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.....Read more...
Job Title: Vehicle Technician
Location: Colchester
Salary:£40,000 OTE
About Us: A top automotive dealership with 50 years of excellence in East Anglia. We pride ourselves on exceptional customer service and are seeking a skilled Vehicle Technician for our bustling workshop.
Responsibilities:
- Inspect, diagnose, and repair vehicles following manufacturer guidelines.
- Perform routine maintenance tasks including oil changes, servicing, and brake inspections.
- Use electronic video health checks for vehicle assessments.
- Maintain high-quality standards and address issues efficiently.
- Collaborate effectively with the team.
Requirements:
- Experience as a Vehicle Technician or relevant qualification with MOT tester certification.
- Strong knowledge of vehicle systems and diagnostic tools.
- Excellent problem-solving skills.
- Full UK Driving Licence.
Remuneration:
- Competitive basic wage plus performance-based bonuses.
- Time saved bonus system for efficiency.
Benefits:
- Ongoing training and development.
- Access to the latest technology and tools.
- Employee discounts, cycle to work scheme, health benefits, and more.
- 22 days holiday plus bank holidays.
How to Apply:
If youre interested in this Vacancy. Please click here to apply or contact Rachael on 07885881841 or send your CV to rachael.mortimer@holtautomotive.co.uk
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.....Read more...
As an Assembly Technician you will gain experience in the following areas:
Assembly Operations - Mechanical & electrical
Operational planning - Understanding of purchasing, warehouse control, stock control and work order kitting
Team working and team management
End of line testing
Reading/understanding drawings & electrical schematics
Understanding quality standards
Using measuring equipment
Using hand tools and soldering
Understanding risk assessments
Own Travel would be beneficial.
The role requires the candidate to enjoy developing skills in a technically demanding environment where solving problems and making improvements is something they really want to do.Training:Level 3 Engineering Fitter Apprenticeship Standard https://www.instituteforapprenticeships.org/apprenticeship-standards/st0432-v1-4 Personal Development Programme Day releaseTraining Outcome:
Progression to a higher-level apprenticeship/further training
Progression to full-time employment
Employer Description:Through the use of RF technology we create innovative solutions for thermal process applications. As a result, our products are renowned for their quality and durability. Our systems provide exceptional sealing, welding and heating process solutions to a wide variety of commercial sectors. For instance, these include science, research, production and many other manufacturing supply chains. We work closely with clients, considering their needs and upholding ethical values, our dynamic and experienced team regularly develop new products and processes which are more environmentally sustainable than those they replace. Working Hours :Monday - Thursday 08:00hrs to 16:45hrs, Friday 08:00hrs to 13:00hrsSkills: Attention to detail,Communication skills,Initiative,Logical thinking,Non judgemental,Organisation skills,Patience,Problem solving skills,Team working....Read more...
