RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation. The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing. This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing.....Read more...
RF systems expert with strong physics theoretical knowledge including Matlab simulation and physical RF antenna implementation. The role will be to work from new scientific concepts of what is possible to build and test then improvement from real world testing. This iterative process is used by the team to create new and reliable communications platforms.
Principal Antenna Design Engineer required to design RF antennas and specify Hardware, Firmware and Software requirements driving RF layout, FPGA and software design.
Skills
Satellite Communications modem constellation terminals, space network routing, security, encryption, near field, far fields, RF, Digital, Software, Hardware considering Mechanical and Thermal limitations.
Scientific undergraduate degree in Physics
Physics, electromagnetics or antenna theory related post graduate qualification ideally to PhD level.
Electromagnetic field modelling.
ANSYS HFSS, CST, XFDTD, COMSOL etc.
Role
RF architecture and design.
Antenna RF performance modelling in Ansys HFSS, Matlab or Python.
Specification and analysis of chamber testing.
RF layout, FPGA and associated software design detailing.
Advise on Antenna testing.....Read more...
An exciting opportunity has arisen for a Lead Product Engineer based in Great Yarmouth, Norfolk, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Lead Product Engineer role, based in Great Yarmouth, Norfolk, will be to lead microelectronic product portfolios for both New Product Introduction (NPI) and Legacy product lines. They will be working with customers on product requirements, manage change requests and documentation and component obsolescence.
Some of the key experiences and competencies for the Lead Product Engineer, based in Great Yarmouth, Norfolk will be to work to aerospace / defence standards ideally within a microelectronic product line. Packaging experience with customer designs will be beneficial along with an understanding of mechanical CAD design principles.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Lead Product Engineer job based in Great Yarmouth, Norfolk sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299. Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion.....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
Electronic and Mechanical Senior or Principal Test Engineer required to design, build and develop a range of automated test processes for optical sensors including their test, calibration and characterisation.
Key Skills
Optical sensing
Optoelectronics or fibre optics
Strong degree or PhD in a relevant field such as Physics, Optics, Engineering etc.
Significant experience in Optical test environment
Data acquisition and processing using National Instruments Labview Product and compliance testing
Project Management or Line Management would also be ideal
Role responsibilities
Product testing from component level to product from prototype through the manufacturing process and final product test.
Data analysis, interpretation and presentation of recommendations.
Design and development of pressure, temperature and acoustic test processes for optical systems.....Read more...
The Role: Commissioning Engineer
Salary up to £55k DOE
33 Days Holiday (Incl stats)
Company Pension
PPE Supplied
Company Values Reward Scheme
My client is looking to recruit a controls biassed commissioning engineer, to form part of a dedicated team whose primary focus is to transition our automated equipment from completion of build through to customer inspection and sign-off. Managing Projects through to completion playing a large part in this role.
The Company
My client provides bespoke turnkey automation solutions offering their customers a complete one stop solution - from design to delivery.
Key Responsibilities
The following list is an indication of roles and responsibilities you will be expected to undertake as a successful commissioning engineer. The list is not exhaustive and intended as guidance only. Individual tasks vary depending on the type of technical support you are providing, but in general, you'll need to:
- Programme and modify control systems using PLCs, Servo drives, Robots, and other specialised controllers specific to customer requirements.
- Troubleshoot & adjust mechanical, electrical, pneumatic and controls equipment.
- Fault finding and operational assessment of mechanisms both in isolation and in complex form.
- Modifying systems through electrical, mechanical, pneumatic or software means to enhance performance.
- Identify opportunities to improve a system with a view to presenting these to other team members.
- Perform tests, using structured processes, to build a defined understanding of a mechanisms limitations.
- Record test results in suitable manner such that they can be used to support the necessity/direction of further work.
- Ensure records of all modifications are documented correctly.
- Provide proactive feedback to the project team to enable project progress to be determined.
- Participate in internal design reviews on existing or potential projects.
- You may be required to attend and work at customer premises throughout the UK and overseas.
The Right Person
The successful Commissioning Engineer will have the relevant vocational training or will have completed a recognised apprenticeship in an electrical or mechanical discipline as well as possessing the following attributes and skills:
- Experience programming Programmable Logic controllers (PLC), and Human Machine Interfaces (HMI) using software such as Allen Bradley, Mitsubishi, Festo, Codesys, Siemens.
- Knowledge of setting up Servos, VFDs, Remote I/O, Ethernet and Profibus networks.
- Proven electrical, pneumatic, or mechanical experience within the automation industry.
- Ability to follow electrical and pneumatic schematic diagrams and drawings.
- Knowledge of 6 Axis Robot systems is preferred.
- Knowledge of script-based programming would be an advantage.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionsearch.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
JOB DESCRIPTION
Job Title: NEW PRODUCT DESIGN ENGINEER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the "thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 5 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
JOB DESCRIPTION
Job Title: NEW PRODUCT DESIGN ENGINEER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products. You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the "thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 2 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
Are you seeking an exciting Production Engineer job within an innovative and advanced technology company that’s based in Chelmsford, Essex? Do you have a keen interest in mechanical / production / test engineering?
As a Production Engineer you will play a pivotal role in the manufacturing process, ensuring the successful production of high-quality RF products. Your expertise will drive efficiency, optimise processes, and guarantee products meet stringent quality standards. You will collaborate closely with cross-functional teams, including design, manufacturing, and quality assurance, to deliver exceptional RF products to our customers in Medical, Marine, Industrial and Defence markets.
Key skills and experience for the Production Engineer role based in Chelmsford, Essex:
Bachelor’s Degree in Mechanical, Manufacturing, Electrical Engineering or similar. Alternatively, HNC and provable experience.
Engineering experience in a manufacturing environment.
Proficiency in process optimisation, root cause analysis, and quality control methodologies, such as 8D, Six Sigma.
Excellent problem-solving skills and the ability to work well under pressure.
We are looking for an ambitious individual who is excited by technology and innovation, who would like to join a team of fast-moving, dedicated, passionate and technical professionals focused on making a difference.
This Production Engineer job, based in Chelmsford, Essex is a fantastic opportunity to join a company who offer dynamic, challenging and exciting career opportunities and is commutable from Bishop’s Stortford, Braintree, Colchester, Southend-on-Sea, Brentwood, Ilford, Romford, Ipswich, Harlow, Enfield and Basildon.
For more information on this Production Engineer job in Chelmsford, Essex or to discuss similar jobs, please call Jamie-Lee Debenham on 01582 87 8807 or 07961158786. Alternatively you can email JDebenham@Redlinegroup.Com....Read more...
Basildon
£30,000 - £40,000 + Technical Development + Bonus Scheme + Loyalty Bonus + Performance Bonus + ' Immediate Start'
Fantastic opportunity to join a growing organisation that specializes in the design and production of cutting-edge laser systems This company prides themselves on providing endless opportunities for in house training and progression. You will be joining as a Workshop Engineer in a structured and supportive team with the possibility for various bonuses.
This company specializes in the laser machine manufacturing industry. Due to demand they require a Workshop Engineer looking to become a specialist within a nice sector of the engineering field! This company offers full training to ensure you can do the job to the best of your ability, with room to progress into senior positions within the business. If you are looking for a great work environment and more responsibility then this role is for you!
Your Role As a Workshop Engineer Will Include:
Follow drawings, build guidelines and processes
Assemble mechanical and electrical parts, cabling, electronics, and pneumatics
Update and configure software
Install laser modules
Perform test/measure procedures as part of a calibration and QC process
The Successful Workshop Engineer Will Have:
Electrical & Mechanical Skills
Commutable To Basildon
If interested in this position please contact Sai on 07537153941
Key words: Assembly engineer, laser systems, training, progression, drawings, electronics, mechanical, electrical, troubleshooting, debugging, calibration, QC process, software, laser modules, test procedures, measure procedures, mechanical assembly, electrical assembly, Basildon, Langdon Hills, Dunton, Fobbing, North Benfleet, Bowers Gifford, Heron Gate, Wickford, Corringham, Rayleigh, Orsett....Read more...
Redline are currently working on a 6 month Contract CAD Engineer - Inventor, Hertfordshire opportunity with a leader in intrinsic electronics systems based in Hertfordshire.
As our client is considered exempt for IR35 purposes, the successful candidate will be responsible for assessing IR35 status, should you wish to operate via your own PSC.
Our client is a market-leader in cutting edge ruggedised technology, delivering to a wide range of clients around the globe in defence markets. They are in need of extra support from a Contract CAD Engineer - Inventor, to re-visit and modify a backlog of their current designs, that span the past 50 years. The contract will cover sheet metal work, 3D printing, and electrical, in the form of digital files, paper drawings and design on film, whilst their permanent team are working on a new project win.
You will be required to work on site 5 days a week with the mechanical team in Hertfordshire.
Key Requirements – Contract CAD Engineer - Inventor, Hertfordshire:
- Recent experience with Inventor
- Experience of producing drawings of enclosures
- Sheet metal/metal design experience
- Knowledge of BS8888: Technical product documentation and specification
All candidates must be able to obtain SC Security Clearance
For more information or to apply for the Contract CAD Engineer - Inventor, Hertfordshire opportunity, please contact Maddie Ramsden at MRamsden@RedlineGroup.Com/ 01582878815 or 07940254185 quoting reference MMR1025....Read more...
An international design and manufacturer specialising in engine components for the aerospace sector, are looking for a Quality Engineer to be based at their site in Redditch, Worcestershire.
The Quality Engineer, Redditch, Worcestershire will be responsible for driving quality improvements throughout production, ensuring product assurance. They will develop and implement corrective actions from customers and have a strong understanding of quality tools such as 8D methodologies.
The candidate for the Quality Engineer job will be from a manufacturing working environment, ideally with links to either the aerospace or automotive sectors, however other industries will be considered within mechanical fabrications / sheet metal.
Apply Now, if this Quality Engineer job based in Redditch, Worcestershire sounds like the opportunity for you; click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1291. Alternatively, if this job is not suitable but you are looking for a job within Production, please call 01582 878 848 or 07961158762 for a confidential discussion.....Read more...
Automation Software PLC Engineer- Zurich, Switzerland
(Tech stack: Automation Software Engineer; PLC programming, SCL, ST, Siemens WinCC, Siemens SIMOTION, SINAMICS S120, HMI configuration, drive systems, control software development, electrical and mechanical design, Siemens Technology CPU, TIA Portal, automation systems, C#, .NET, Azure, cloud integration, SCADA systems, OPC UA, Modbus, Ethernet/IP, Python, industrial automation, IoT; Automation Software Engineer)
We have several fantastic new roles for Automation Software PLC Engineer to join an ambitious Engineering company. This is your chance to work with the brightest minds in Engineering. Our latest product release has revolutionized the way people perceive engineering solutions and empowered companies to deliver personalized, scalable, and unparalleled frameworks for their clients. With our cutting-edge technology, we have transformed the engineering industry, providing innovative solutions that surpass current market standards. Join our team and be part of shaping the future of engineering.
Our client is looking for passionate Automation Software Engineer candidates with experience in some or all of the following (full training will be provided to fill any gaps in your skill set): PLC programming, SCL, ST, Siemens WinCC, Siemens SIMOTION, SINAMICS S120, HMI configuration, drive systems, control software development, electrical and mechanical design, Siemens Technology CPU, TIA Portal, automation systems, C#, .NET, Azure, cloud integration, SCADA systems, OPC UA, Modbus, Ethernet/IP, Python, industrial automation, IoT)
This is your opportunity to be part of a new, technically challenging project and to be involved in the creation of a new application from scratch. Engineering is booming and our client are fast becoming a leader of this market!
All Automation Software PLC Engineer positions come with the following benefits:
Shares in the company.
Pension scheme (8%).
3 hours ‘free time’ each week to investigate new technologies.
An annual training allowance of CHF 4,500.
27 days holiday (excluding Public Holidays) plus your birthday off.
Flexible working hours.
Access to free online yoga classes which take place over lunch or after work.
Location: Zurich, Switzerland/ Hybrid Working
Salary: CHF 90,000 - CHF 110,000 + Bonus + Pension + Benefits
To apply for this position please send your CV to Charlie Skipper at Noir.
Applicants must be based in Switzerland and have the right to work in Switzerland even though remote working is available.
NOIRSWITTZERLANDREC
NOIREUROPEREC
NOIREURNET
NC/CS/PLC100130....Read more...
JOB DESCRIPTION
Job Title: Corporate Project Engineer - Mechanical
Location: Somerset, NJ
Department: Corporate Engineering
Reports To: Sr. Manager - Corporate Engineering
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Corporate Project Engineer is accountable for leading strategic CapEx engineering projects within Manufacturing Operations with a focus primarily on Mechanical Engineering. This includes executing engineering projects for capital installations $200,000+, project management ownership from design through startup, and long-range technical planning and strategies for the business. The role also leads the creation and maintenance of engineering design specifications, guidelines, and standards.
Principle Accountabilities:
Responsible for capital project execution including equipment selection, justification, CapEx processing, purchasing, installation, and start-up support efforts Engineering Design - Assist in engineering design specifications and Techno-Economic Models including process design, P&ID, mass and energy balances, equipment sizing, and financial analyses (CapEx, OpEX, NPV) Support & bolster the Engineering Work Process providing strategic direction and support to build and enhance the work process Engineers within the team on large projects can be assigned specific portions of capital projects based on expertise and workload availability including project management, technical design of packaging equipment & paint making/processing equipment, and construction management. Project Management - Manage projects using the Engineering Work Process from conceptual design through successful startup transition to the local plant team. This includes managing budget, timeline, and deliverables to ensure projects meet established success criteria. Design - Recommend, and implement manufacturing systems that are designed for machine, human interaction, method/process, raw material & environmental variability. Design to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and to minimize production losses. Construction Management - Manage contractors, technicians, skilled trades, and internal resources to safely install and startup manufacturing systems. This includes working with the plant operational teams on training, standard operating procedures, and identification of spare parts. Apply the Process Safety Management (PSM) regulations, building code, and NFPA fire code to capital projects and design specifications Manage external Engineering Firm resources on large capital projects Frequent interface with corporate staff, plant staff, operators, and maintenance personnel across a 3-shift operation
Education/Experience Requirements:
BS in Mechanical Engineering preferred. Chemical, Industrial, Manufacturing, Packaging, and Electrical Engineers with hands-on related experience will also be considered. 5 years Minimum in plant engineering support role with hands-on experience in engineering, process design, continuous improvement, troubleshooting equipment, project management and project start-up verification Demonstrated strong organizational, interpersonal, and technical communication skills, with the ability to lead and thrive in fast-paced, multitasking environments Commitment to safety, ethical behavior, and respect for people, ensuring adherence to industry standards, governmental regulations and company values Willingness to travel frequently to support capital project assignments. Travel will be variable, depending on ongoing project needs (~20-30%)
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9.5 paid holidays and 2 floating holidays per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online!....Read more...
As a Product Development Engineer, you will work on Vehicle Test System development from concept specification through hardware, firmware, software and mechanical design and development to user acceptance.
The ideal candidate will understand automotive testing against industry regulatory requirement compliance. You will have an opinion on vehicle test procedures and be able to design a test process that captures useful data that gives more insight than just a pass or fail. You will have exposure to brake testing, vehicle dynamics, ADAS validation or something like pass-by-noise.
This is a highly collaborative role with the Product Development Engineer internally driving solutions for customers across the complete life cycle of a product, from conception, specification, user acceptance testing and pre to post sales. You will have a strong engineering foundations and technical understanding of automotive compliance or motorsport performance testing but also skills in project management and customer interaction.
Requirements
Experience in the Automotive sector, preferably within Vehicle testing.
Engineering background, degree or HNC level qualification
Ability to read and understanding technical regulations documentation such as specifications and product data sheets and manuals.
Interest in solving complex engineering problems.
Customer facing with strong communication skills, both oral and written.
Full, clean UK driving licence
GNSS, GPS or INS technology knowledge.....Read more...
As a Product Development Engineer, you will work on Vehicle Test System development from concept specification through hardware, firmware, software and mechanical design and development to user acceptance.
The ideal candidate will understand automotive testing against industry regulatory requirement compliance. You will have an opinion on vehicle test procedures and be able to design a test process that captures useful data that gives more insight than just a pass or fail. You will have exposure to brake testing, vehicle dynamics, ADAS validation or something like pass-by-noise.
This is a highly collaborative role with the Product Development Engineer internally driving solutions for customers across the complete life cycle of a product, from conception, specification, user acceptance testing and pre to post sales. You will have a strong engineering foundations and technical understanding of automotive compliance or motorsport performance testing but also skills in project management and customer interaction.
Requirements
Experience in the Automotive sector, preferably within Vehicle testing.
Engineering background, degree or HNC level qualification
Ability to read and understanding technical regulations documentation such as specifications and product data sheets and manuals.
Interest in solving complex engineering problems.
Customer facing with strong communication skills, both oral and written.
Full, clean UK driving licence
GNSS, GPS or INS technology knowledge.....Read more...
Through the process of agreement and preference, you will be selected for a design engineer discipline of either electrical, mechanical or structures and outfit. During the Engineering Higher Apprenticeship you will develop knowledge, skills, design toolsets (such as AutoCAD and Autodesk inventor) and behaviours within your engineering discipline whilst gaining valuable experience in design engineering which will culminate in you completing an End Point Assessment with a view of becoming an Associate Design Engineer. This will set you on the engineering career development ladder to potentially develop through the engineering levels, leading to the opportunity to progress to a Principal Design Engineer and beyond.
The Engineering Higher Apprenticeship is a 3-year scheme with the first 6 months spending time in Portsmouth Naval Base’s Skills and Development Centre, where you will develop your practical engineering skills. Following that, you will spend time in a number of different placements within related engineering departments where you will undertake a range of engineering activities and be exposed to different aspects of the project lifecycle. Also, within the Design Team you will experience placements with the other engineering disciplines to provide a wider perspective and all round engineering understanding. You will attend college during the first 2 years on a day release programme to complete the Higher National Certificate (HNC).
At the end of the 3 years, you will be required to complete and pass an End Point Assessment which confirms you have gained the required knowledge, skills and behaviour for the apprenticeship.Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Approximately 95% of apprentices choose to stay on with us. As a global business, there is a world of opportunities – whether you decide to stay in the UK, or explore an overseas role.Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Days and shift to be confirmed.Skills: Communication skills,Organisation skills,Team working....Read more...
The Role: Electrical Design Engineer
Salary up to £50k DOE
25 Days Holiday plus Stats
Discretionary Bonus Scheme
4.5% Contributory Pension
Life Insurance
Health Cash Plan
Cycle to Work Scheme
My Client is looking to hire a skilled Electrical Design Engineer. In this pivotal role, youll contribute to the design of electrical equipment for industrial applications. Your responsibilities will include implementing electrical best practices, adhering to industry standards, and collaborating with the design team to create innovative solutions. The successful candidate should have hands-on design experience and a solid grasp of electrical engineering principles, along with basic knowledge of mechanical design
The Company
An electrical equipment manufacturer based in Leicestershire who design and manufacture electrical equipment used in industrial automation and many other markets./ Supplying large contractors throughout Europe
Key Responsibilities
- Review design requirements and produce design calculations and production documentation (resistor element and design overview sheets).
- Apply relevant design, regulatory, and industry standards.
- Produce electrical wiring diagrams using AutoCAD Electrical and corresponding component layouts.
- Review and approve design information from other team members.
- Adhere to quality systems, including using Engineering Change Orders (ECOs) to document changes.
- Oversee the CE marking process on new designs including performing DFMEAs.
- Participate in research, development, and product testing as agreed with the Division Director.
- Conduct technical investigations, perform root cause analysis, and initiate corrective actions.
- Provide technical support to Production, Sales, Service, and Customer Support.
- Deliver projects on schedule and within budget, managing a complex workload efficiently.
- Identify and apply new industry-wide processes within the company.
- Perform additional duties as required.
The Right Person
The successful Electrical Design Engineer will have a minimum of 3 years experience and be educated to degree level in Electrical Engineering as well as the following key skills:
- A high level of competency with Autodesk AutoCAD Electrical is required
- A CAD software package such as Autodesk Inventor, Creo, Siemens would be an advantage.
- Knowledge of, and experience of designing in accordance with IEC 60204 and IEC 61439.
- Experience of the product CE marking process and DFMEA.
Interested? Here are your three options
1. This is the job for me, I meet all the requirements Call now and lets talk through your experience. Ask for Jon Webster on between 8.30am 5.30pm
2. I think Im right for this position, but Im not sure about some of the detail Click apply now so I can read your CV and come back to you.
3. Im interested but need to know more about what this job can offer me email jon@precisionsearch.uk with your CV and questions and I will reply with more detail.
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPTP....Read more...
Within Test & Commissioning you will be working as part of a wider team that tests and commissions the Astute & Dreadnought class submarines. This is one of the final phases of boat build and ensures that the mechanical and electrical systems are built to their design intent and function safely and reliably.
As a degree apprentice you will be working alongside qualified engineers on the Reactor Systems to support these tests that are essential for the submarine safe operation.
During the programme individuals will be working towards becoming a qualified and competent commissioning engineer and studying Nuclear Engineering at University.
Specific activities could include:
Working closely with the Operations build teams to verify that the systems have been installed to the appropriate workmanship quality standards. The Installations are checked for any defects and for any bespoke installation requirements such as those to facilitate commissioning tests
Carrying out system walk downs to ensure the systems conform to the installation documentation. This is an essential layer of protection to ensure the plant has been installed correctly to the design intent
Commissioning the systems by testing the system's functionality. In the early commissioning phases this includes testing individual plant items and plant systems within boundary conditions. In the later commissioning phases the plant systems are tested as fully integrated systems as per design intent
Commissioning the plant includes flushing, pressurising and energising the systems to check for defects, functionality and also to check that plant operating parameters are within specification and tolerance
Achieving safety from the system by applying electro mechanical plant isolations and dissipating any stored energy in order for the plant to be worked on safely
Training:
Nuclear scientist and nuclear engineer (integrated degree)
At least 20% of your working hours will be spent training or studying
Training Outcome:
Approximately 95% of apprentices choose to stay on with us. As a global business there are a world of opportunities - whether you decide to stay in the UK, or explore an overseas role
Employer Description:At BAE Systems, we provide some of the world’s most advanced, technology-led defence, aerospace and security solutions. We employ a skilled workforce of more than 93,000 people in around 40 countries. Working with customers and local partners, we develop, engineer, manufacture, and support products and systems to deliver military capability, protect national security, and keep critical information and infrastructure secure.Working Hours :Shifts to be confirmedSkills: Communication skills,Organisation skills,Team working....Read more...
Technical Sales Engineer
Crawley
£46,000 - £66,000 + Bonus + Travel Allowance + Mileage + Training + Holidays + Technical Progression + Flexible Hybrid Working + Data Centre Industry + Progression + Healthcare + Pension + Birthday Day Off + Immediate Start
Join one of the world’s leading specialists in critical environments as a Technical Sales Engineer in the data centre industry. Work for a company with commitment to consistent training and development that empowers you to advance your career. Ideal for ambitious individuals seeking progression opportunities, including potential advancement to Head of Solutions.
As a Technical Sales Engineer, you'll work closely with a skilled team, gaining invaluable knowledge in a multi-billion-pound industry. Engage with customers to understand their needs and provide tailored technical solutions that align with their requirements. If you're ready to take the next step in your career and make a meaningful impact in the data centre industry, I invite you to embark on a rewarding journey of growth and success.
Your Role As A Technical Sales Engineer Will Include
* Managing bid processes, including proposal development and stakeholder coordination * Managing key accounts and relationships * Coordinating wider teams and partners to deliver successful projects. * Driving profitable growth by cultivating client relationships and understanding their needs * Heavily biased towards Account Management
As A Technical Sales Engineer You Will Have:
* Technical solutions and sales acumen * Three years of industry experience, preferably in a mechanical, electrical or data centre discipline. * Hands-on experience and technical competence * The ability to develop proposals, conduct estimations, and communicate technical solutions
If you would like to know more information give Dea a call on 07458163032. Keywords: Technical Sales Engineer, Internal Sales Engineer, Interim Sales Engineer, Technical Sales Manager, Data Centre, Sales Engineer, Business Development, Account Management, Solutions Engineer, Mechanical, Electrical, Business Manager, Sales Manager, Head of Sales, Gatwick, London, Crawley, Redhill, Surrey Hills, Croydon, East Grinstead, Technical Pre-sales Engineer, Proposals Engineer, Sales Consultant, Technical Sales Specialist, Renewable Energy, Critical Infrastructure, Mission-Critical Facilities, HVAC, Power Generation, Energy Management, Telecommunications, Cloud Computing, Engineering Services, Renewable Energy Solutions, Electrical Infrastructure, Building Services, Solution Architect, Technical Account Manager, Field Sales Engineer, Applications Engineer, Client Solutions Engineer, Customer Success Manager, Key Account Manager, Project Engineer, Presales Consultant, Technical Business Development, Sales Engineer Manager, Systems Engineer, Business Development Manager, Product Specialist, South East England, Sussex, Greater London, Kent, South London, West Sussex, Brighton, Horsham, Tonbridge, Haywards Heath, Maidstone, Proposals, Design, Bids, Costing.....Read more...
Catfoss Recruitment Ltd are currently in partnership with a well-established global market leader, dedicated to solving thermal energy problems with high quality solutions across a wide range of industries including food, chemical, metal, pharmaceutical, public sector and marine industries and they are looking to recruit a Project Engineer on a permanent basis.Convinced that the management of today's energy resources will determine tomorrow's world, we have the following objectives:• Optimise energy consumption• Reduce the environmental impact of our industrial customers, by supporting them in all phases of the operation of their boiler room. We manufacture and supply products and services including fire tube and hot water boilers, burners, process heating, water treatment, space heating, steam generators and thermal oxidation equipment used within a wide range of applications across many different industries and countries.Project Engineer - The role• Using the companies manufacturing centres based in Europe for supply of the main equipment and sourcing ancillary equipment locally, you are required to supervise and co-ordinate project planning, design, procurement, build, subcontractors, installation works, despatch to site and commissioning.• Projects typically range in value between £30k - £2m and may involve equipment supply only, supply and installation, special skid-built equipment and turnkey projects. In most cases, the company’s own Service Division will be utilised to carry out the commissioning of each project.Reporting to the Contracts / Process Engineering Divisional Manager your key responsibilities are as follows:-Project Engineer - Key responsibilities• Take overall responsibility for the supervision and administration of the day-to-day activities and coordination of multiple contracts from point of order to final commissioning and handover• Supervise and co-ordinate planning, design, procurement, build, subcontractors, installation works, despatch to site and commissioning. • Ensure accurate data is assembled and recorded to enable the procurement and manufacture of equipment to fulfil contractual requirements.• Control and manage the contractual and commercial requirements of the project.• Maintain clear liaison between customers, suppliers and subcontractors to ensure contract requirements are met with regards to quality, time and budget.• Ensure contract financial requirements are adhered to within the time scales specified.Project Engineer - ExperienceExperience is sought within the plant and process engineering field.Ideal experience would be from within the mechanical contracting services or process engineering with specific reference to steam or high temperature process heating applications.Additionally:• Proficiency with MS Office suite of applications.• NetSuite and Salesforce experience. (Ideal but not essential)• A track record in working on technology orientated, multi-disciplinary projects.• Excellent organisational and multi-tasking ability.Project Engineer - QualificationsHNC/Degree or equivalent in mechanical or chemical engineering or a process engineering discipline with experience in a compatible industry or a manufacturer of related equipment.Project Engineer – Communications SkillsThe ability to work within a team environment and to communicate clearly and effectively at all levels within the Company structure and with our customers and suppliers.Project Engineer previous suitable job titles: Contracts Engineer, Contract Engineer, Project Manager, Projects EngineerPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application. All successful candidates will be contacted as soon as possible.....Read more...
Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems.
Key Responsibilities
Design and manufacture of liquid propellant and high-pressure gas feed systems.
Advanced training provision in key operational skills on firing sites.
Proficient analysis and assessment of test data, producing high-quality analysis material.
Adherence to COMAH controlled testing standards.
Minimum Requirements:
Mechanical fitter or practical engineering skills
Ideally qualified to OU or equivalent graduate level course in engineering.
Level 4 training on the Skills and Competency Matrix with in-depth experience.
....Read more...
Seeking a skilled C++ Automotive Test Engineer to join our dynamic team at an innovative automotive company
Responsibilities:
Design and develop testing tools, scripts, and fixtures for new automotive products.
Enhance existing testing tools and processes.
Collaborate with test engineers to meet project deadlines.
Execute tests using our automated testing framework.
Analyse and report test results.
Requirements:
Degree in Automotive, Motorsport, Mechanical, or Electrical Engineering.
Strong programming skills in C++ and Python.
Full clean UK driving license.
Experience with GPS and automotive technologies.
Background in automotive or motorsport data analysis.
Knowledge of testing methodologies.
Valid UK driving license.....Read more...
Seeking a skilled C++ Automotive Test Engineer to join our dynamic team at an innovative automotive company
Responsibilities:
Design and develop testing tools, scripts, and fixtures for new automotive products.
Enhance existing testing tools and processes.
Collaborate with test engineers to meet project deadlines.
Execute tests using our automated testing framework.
Analyse and report test results.
Requirements:
Degree in Automotive, Motorsport, Mechanical, or Electrical Engineering.
Strong programming skills in C++ and Python.
Full clean UK driving license.
Experience with GPS and automotive technologies.
Background in automotive or motorsport data analysis.
Knowledge of testing methodologies.
Valid UK driving license.....Read more...
