Mechanical Technician required to maintain Downhole motor and Progressive Cavity Pumps. The ideal candidate will have mechanical workshop experience ideally on rugged machine maintenance for the oil and gas industry, Downhole or Wireline systems, but this is not essential.
Job Summary
You will join a team who ensure the delivery of operationally ready and serviced equipment which reduces asset downtime.
Mechanical Technician required to maintain Downhole motor and Progressive Cavity Pumps. The ideal candidate will have mechanical workshop experience ideally on rugged machine maintenance for the oil and gas industry, Downhole or Wireline systems, but this is not essential.
Job Summary
You will join a team who ensure the delivery of operationally ready and serviced equipment which reduces asset downtime.
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
Field Service Engineer Waterford €40,000 - €45,000 Basic + Overtime + Allowance + Training + Work-Life Balance + Stability + Van + Regional Patch + Immediate Start
Are you a Field Service Engineer looking to become a real specialist within the coffee industry whilst working with a company that offers real stability and support? Join a well-structured, growing business where you can become a technical specialist on advanced equipment.
This is a fantastic opportunity to join a rapidly expanding coffee machine manufacturer, now backed by a global group, working across a local regional patch. With thousands of machines across Ireland and the UK, and major contracts secured, this company continues to grow while maintaining a strong team culture and high engineer retention. You’ll benefit from structured training, realistic workloads, and the chance to develop into a true specialist Field Service Engineer.
Your Job As A Field Service Engineer Will Include:
* Installation, servicing, maintaining, and repairing coffee machines * Fault finding, testing, and diagnosing electro-mechanical equipment * Covering a regional patch across Waterford * Providing excellent customer service and building strong client relationships * Working on advanced, modular coffee equipment across commercial sites
As A Field Service Engineer You Will Have:
* ANY Electro-mechanical background * Strong fault-finding and diagnostic skills (multimeter use essential) * Full driving licence (essential) * Experience working in a field service environment * Happy to travel regionally
Apply now or contact Billy on 07458 163030 for immediate consideration
Keywords: coffee engineer, coffee machine technician, catering equipment, espresso machines, vending, Waterford, Ireland ....Read more...
Redline has an extraordinary opportunity for multiple Contract Mechanical Technicians based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments.
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around £500 million and they need you to come on board and help them make it a success.
You will be responsible for the upgrade and installation of existing mechanical units and placing them into racks to fit into a bigger machine.
Key skills required for the Contract Mechanical Technician position based in Oxfordshire:
- Experience in construction, conditioning, testing, installation & commissioning Mechanical Systems
- Experience working in high technology or Ultra High Vacuum environment
- Recognised Apprenticeship in Mechanical or Electrical Engineering discipline, alternatively significant years of experience
For more information or to apply for the Contract Mechanical Technician opportunity based in Oxfordshire, please contact Jack Kelly – jkelly@redlinegroup.Com / 01582 878812 quoting reference JWK1068.....Read more...
As a CNC machinist with Atlantic, you will:
Learn to programme, set and operate computer-controlled machine tools
Using fixtures/chucks/work-holding devices
Machining different types of materials and their properties
Setting and checking cutting tools
Measurement of components (metrology)
Reading drawings and working in both metric and imperial
Understanding machine tool feeds and speeds
Using cutting fluids in machining and working safely in engineering
Training:On completion of the apprenticeship, you will have achieved the following qualification;
EAL L3 Extended diploma in Machining (Development Knowledge) Level: 3
Workplace qualification:
Mechanical Manufacturing Engineering NVQ (Level 3 Diploma)
This will include on-site training at Atlantic Precision and at Farnborough College.
The final apprenticeship completion certificate will be issued on achievement of the above qualification and successful completion of end point assessment.Training Outcome:To become a fully trained and qualified CNC Machinist Technician with Atlantic Precision.Employer Description:Atlantic Precision Engineering is a well established company with over 50 years background and experience of providing a Precision Manufacturing Service to the Aerospace & most major industrial sectors. We offer a professional, responsive service for high quality CNC machining (including 5 axis) of metallic, plastic and composite components, mechanical & bonded assembly.Working Hours :Mon-Thurs 08:00 – 16:30 (30 mins break) Fri 08:00 – 12:30 (no break).
36.5 for 1st year, 39 thereafter.Skills: Attention to detail,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working....Read more...
Role and responsibilities:
To generate CNC programs using Siemens NX to run on AESSEAL machine tools
Verify CAM generated programs using Vericut Software
Work on tool, method and production standards
Regular liaison with workshops
Regular liaison with Design
Review and save proven programs onto Teamcenter
Collaborate with workshop personnel/managers on new machine methods
Work shifts (to be discussed/agreed)
This list is not exhaustive. The job holder is required to carry out reasonable tasks within their level of skill and ability
Training:You will study on a Level 3 Machining Technician Standard. On completion of this, you will gain a qualification in Engineering at Advanced Level 3.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:At AESSEAL® we design and manufacture sealing solutions for a sustainable future.
We combine both our own success with environmental protection and being a good corporate citizen.
Through our investment in innovative new sealing solutions we enable our customers in a wide range of industries to meet the complex needs of society both now and in the future.
We believe in operating in an ethical and sustainable manner, providing sealing solutions to our customers that improve reliability and help reduce energy and water consumption. Our world class manufacturing facilities use the latest in machine tool technology and our systems and processes enable us to be the worlds largest homogeneous mechanical seal manufacturer.
By investing in pioneering technology, we simplify the whole ordering process and respond quickly to customers’ needs – whatever, wherever. We aim to exceed expectation consistently: in delivery, quality, reliability and service. We’re challenging industry standards, challenging our competitors, challenging thinking – and challenging to become world market leader.Working Hours :Monday - Friday. Your start and finish times, including your shift pattern will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative....Read more...
As an Engineering Apprentice, your day‑to‑day duties may include:
? Machining & Manufacturing Tasks:
Assisting in the setting up and operating manual and CNC machines, such as lathes, milling machines and grinders
Measuring and inspecting components using precision tools (micrometers, verniers, gauges) to ensure work meets engineering drawings and tolerances
Supporting the production of bespoke machined components for various engineering projects
Learning to produce and interpret engineering drawings, CAD models and specifications
?️ Workshop Skills & Maintenance:
Maintaining a clean, safe and organised work area, following company safety procedures
Carrying out basic machine maintenance, such as cleaning, lubrication and pre-operational checks
Preparing materials, tools and equipment required for machining tasks
? Training & Learning Responsibilities:
Attending training sessions towards the Machining Technician Level 3 qualification
Shadowing senior machinists to learn advanced machining techniques and processes
Recording learning progress, job tasks and evidence for portfolio completion
? Teamwork & Communication:
Working alongside experienced engineers, contributing to problem‑solving and process improvements
Communicating effectively with colleagues regarding job status, issues or quality concerns
? Health, Safety & Quality:
Following health and safety regulations, including PPE requirements and safe machine operation
Adhering to quality procedures, including first-off checks and final inspections
Training:Machining Technician Level 3.Training Outcome:After completion of your apprenticeship, you will potentially have the opportunity to progress onto full-time positions within the business.Employer Description:Smart Engineering (UK) Ltd is based in Buxton, Derbyshire and was established by Daniel Smart in 2007.
We are sub-contract machinists who use CNC machines to turn and mill high quality plastic parts.We work on a broad range of engineering plastics and produce single items, small batches, large batches and bespoke assemblies which combine both fabrication and machining.
All our CNC plastic machining is carried out to the highest standards.
We invest a lot of time in the training of our employees and this has resulted in us becoming a very strong and friendly team who take a group approach to problem solving.
We take this friendly attitude to our customers and we are proud of the way that we maintain long term relationships with them.
We are efficient, reliable, give an excellent level of service and deliver high quality workWorking Hours :40-hours a week, Monday to Thursday from 8:00am - 6:00pmSkills: Communication skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Analytical skills,Team working,Initiative,Reliability,Time management....Read more...
As a Process Technician Apprentice, you won’t just be watching from the sidelines. You will be "learning by doing" - gaining the technical skills required to operate, monitor, and maintain sophisticated industrial equipment.
You’ll work alongside seasoned engineers to ensure our production lines are hitting targets without compromising on safety.
What You’ll Be Doing:
Monitoring Systems - Learning to read gauges, flowmeters, and digital control panels to keep the "vitals" of the plant stable
Troubleshooting - Identifying why a machine isn't performing at 100% and assisting with the fix e.g. Calibrations & speed checks
Quality Control - Taking samples and performing basic lab tests to ensure the final product meets exact specifications
Safety First - Lockout/Tagout (LOTO) procedures and wearing the proper PPE to maintain a "zero-incident" environment
Maintenance - Learning the difference between preventive maintenance and emergency repairs
Training:Engineering and Manufacturing Support Technician Level 3.Training Outcome:This is the first step toward becoming a Senior Technician, Shift Lead, or even a Plant Manager.Employer Description:We are a global materials science and digital identification solutions company with approximately 35,000 employees in more than 50 countries.
We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste and mitigate loss, advance sustainability, circularity and transparency and better connect brands and consumers.
We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital and offerings that enhance branded packaging and carry or display information that improves the customer experience.
We serve industries worldwide, including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive.Working Hours :Monday to Friday
Shifts to be confirmedSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills....Read more...
Main duties and responsibilities
Electrical design for controls projects
Electrical design/conceptualisation
Specifying equipment
Drawing/Schematic generation via Electrical CAD packages, generating connection matrices/charts
Physical build and wiring of controls systems/panels/field wiring
Design and implementation of machine safety systems to PUWER/Machinery Directive
Machine conformity
Gathering documentation/liaising with component suppliers/manufacturers
Completing risk assessments of machines
Liaising with third providers of CE marking
Support and advise Glenair QHSE department on Machine safety/guarding concerns on existing equipment
Generating user documentation/manuals and maintenance manuals
Mechanical Design
Conceptualisation of mechanical aspects of projects
SolidWorks modelling
Preparation of designs for manufacturing
Mechanical Build
Physical build of Automation projects
Welding/Fabrication
Modification/optimisation of existing parts using machine tools
Manufacturing manually turned/milled parts from drawing or concepts
Develop prototypes and compile relevant documentation
Facilitate continuous improvement activity
Play an integral role in highlighting the potential for automating processes
Train end users in the operation of developed machinery
Additional Duties and Responsibilities
Any other duties deemed appropriate by the Lead Automation Engineer
Stay informed of technical advances within the industry and regulations surrounding it
Play an integral role in developing World-Class operations
Adherence to the Employee Handbook
Any other duties and ad-hoc project work as and when required
Training:You will study on a Level 4 Automation and Controls Engineering Technician standard and on completion of this, you will gain a qualification in Engineering at Higher Apprentice Level 4 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:Glenair UK is a leading provider of innovative interconnect solutions, specializing in the design, manufacture, and supply of high-performance connectors, backshells, cable assemblies, and related accessories. With a rich heritage spanning over several decades, Glenair UK has established itself as a trusted partner in the aerospace, defense, industrial, and commercial sectors.
At Glenair UK, we pride ourselves on delivering cutting-edge interconnect solutions that meet the most demanding requirements of our customers. Our team of experienced engineers and industry experts work closely with clients to understand their unique challenges and provide tailored solutions that optimize performance, reliability, and efficiency.
With a commitment to technological advancement, Glenair UK stays at the forefront of industry trends, constantly pushing the boundaries of innovation. Our state-of-the-art manufacturing facilities and rigorous quality control processes ensure that our products meet the highest standards and exceed customer expectations.
We understand that every project is unique, which is why Glenair UK offers a comprehensive range of standard and customized interconnect solutions. Whether it's a complex aerospace application, a rugged military environment, or a high-speed data communication system, we have the expertise and capabilities to deliver reliable and robust solutions.
Collaboration and partnership are at the heart of our approach. We foster strong relationships with our customers, working closely with them throughout the entire project lifecycle. Our dedicated customer support team provides prompt assistance, technical expertise, and responsive service, ensuring a seamless experience from concept to delivery.
Glenair UK's dedication to excellence, innovation, and customer satisfaction has earned us a reputation as a trusted industry leader. We take pride in our ability to deliver reliable, high-quality interconnect solutions that power critical applications across diverse industries.Working Hours :Monday to Friday. Shifts to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Customer care skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Multitask,Self motivated,Task orientated,Interpersonal skills....Read more...
Set and operate machines in a machine shop environment, learning manual and CNC lathes, vertical borers and milling machines
Select correct cutting feeds and speeds
Select the correct cutting tools
Understand and interpret engineering drawings
CNC Programming and editing
Work efficiently and effectively to production schedules, keeping Shift Supervisors informed of any potential issues or delays
Maintenance and care of tooling and keeping a tidy and organised work environment
Work within the confines of the Health & Safety/Quality Management Systems
Training:Machining Technician Level 3.
The apprentice will be required to attend Sheffield Colleges ATC 1-day per week.Training Outcome:Possibility of full-time employment on successful completion of the apprenticeship.Employer Description:Abbey Forged Products is the UK’s leading forge master in the oil & gas industry and have recently acquired accreditations for the Nuclear and Aerospace industries. With over 40 years’ experience in forging, Abbey are specialists in creating bespoke products using open die forging.Working Hours :Monday - Friday 8am - 4pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Team working,Initiative,Patience....Read more...
Assist in the setup, operation and maintenance of CNC machines under the guidance of experienced machinists
Learn to read technical drawings, measure and inspect parts for quality, and follow safety protocols
Develop hands-on skills in machining, programming, and tool handling to support production processes
Key Responsibilities:
Support CNC machine operations and setups
Learn to interpret blueprints and technical drawings
Inspect and measure finished components for accuracy
Maintain a clean and safe work environment
Assist senior machinists in daily tasks and projects
Training Outcome:A CNC Machining Apprentice begins by learning foundational skills, including machine setup, basic programming, and reading technical drawings under supervision. With experience, they progress to becoming a Junior CNC Machinist, handling more complex parts and independently operating machines. Over time, they can advance to a CNC Machinist or Operator, mastering multiple machines, tooling, and programming languages. Further growth may lead to Senior Machinist, CNC Programmer, or Production Supervisor roles, overseeing teams and processes. With additional training, some pursue specialized paths such as Tooling Engineer, Manufacturing Engineer, or Quality Control Specialist, combining technical expertise with leadership and problem-solving responsibilities.Employer Description:TDR Training is a North East based training provider that helps young people turn curiosity about how things work into real engineering, science, or business careers. They partner with employers to deliver high-quality apprenticeships and practical skills training that combine hands-on experience with formal study. Apprentices are employed while they learn — getting paid, earning nationally recognised qualifications, and building real workplace experience in exciting sectors like advanced manufacturing, engineering maintenance, CNC machining, fabrication, science, and business support.
What makes TDR stand out is their supportive approach: you don’t just sit in a classroom — you learn from industry professionals, work with real companies, and develop skills that employers value. Their programmes span intermediate to higher levels, including paths that could lead to technician, designer, or engineering leadership roles.
Beyond apprenticeships, TDR offers Higher National Certificates (HNCs) and training tailored to specific career goals or employer needs. They celebrate apprentice achievements through events like the TDR Trust Apprenticeship Awards, connecting future engineers with industry leaders.
For aspiring engineers, TDR Training is more than a training provider — it’s a bridge from your first step into technical skills to a long-term career shaping the machines, structures, and technologies that keep the world moving.Working Hours :Monday- Friday
8.00am- 4.30pmSkills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative....Read more...
Role & responsibilities:
Machine complex components to engineering specifications, using cutting-edge equipment
Working to quality standards required for the components
Ensure you adhere to Health & Safety policies and procedures
Working to given timescales
Work alongside skilled machinists to provide you with the knowledge needed to become fully trained
You will also be expected to respond quickly to changing demands throughout your working day
Additional outcomes:
Delivering increased productivity
Reduced production costs, maximising end-user machine output
Working with people at all levels of the organisation
The successful candidate will work within a team whilst demonstrating personal drive and motivation to deliver results.Training:You will study on a Level 3 Machining Technician Apprenticeship:
On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis.
After this, you will attend the training centre for one day a week for knowledge study.Training Outcome:Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world.
These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.Employer Description:In October 2018, we opened the Boeing production facility in Sheffield – our first manufacturing site in Europe. The £40 million, 6,200-square-metre facility is located on Sheffield Business Park, in South Yorkshire, not far from the Advanced Manufacturing Research Centre with Boeing (AMRC).
We make more than 100 different high-tech actuation system components for the 737, from raw materials sourced in the UK. These components are used on the trailing edge of the wings.
Trailing edge actuation systems are responsible for extending and retracting the wing’s flaps during different phases of flight. The flaps add lift to enable take-off and landing at lower speeds, and provide drag to help slow the aircraft. Boeing Sheffield is part of a broader plan to increase inhouse manufacturing of key actuation components and systems in the U.S. and the UK and enhancing production efficiency. The components made in Sheffield are shipped to our facility in Portland, Oregon, for assembly.Working Hours :Monday to Friday. Your start and finish times, including your shift pattern, will be determined by the employing company.Skills: Communication skills,Attention to detail,Organisation skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Assist in the setup and operation of CNC and manual machining equipment
Learn to read and interpret engineering drawings, technical
Support the production of precision components using milling, turning, and drilling processes
Work with a variety of materials, including metals and alloysCarry out basic machine maintenance and tooling changes as training progresses
Use measuring equipment (e.g., callipers, micrometres) to ensure accuracy and quality
Support senior machinists with day-to-day workshop activities
Maintain a clean, safe, and organised working environment
Follow all health and safety regulations and company procedures
Participate in ongoing training and attend college as part of the apprenticeship programme
Training:4 days per week at Impress Group.
1 day per week at Newcastle College.Training Outcome:Upon successful completion of the apprenticeship, there may be opportunities to progress into a full-time Machining Technician or CNC Programmer role, with further training and development available.Employer Description:Impress Group is a well-established and growing engineering and manufacturing business, delivering high-quality precision components and fabrication solutions across a range of industries. With a strong reputation for accuracy, reliability, and innovation, we are committed to developing the next generation of skilled engineers through structured apprenticeship programmes.Working Hours :Monday – Thursday, 7:00am – 5:15pm.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working....Read more...
As an Engineering Maintenance Technician Apprentice, you will be trained to become highly skilled in maintaining and improving the advanced machinery used in glass manufacturing.
You will learn how to support new production setups, carry out essential maintenance tasks, and help ensure the delivery of high‑quality insulated glass products. You will also be involved in repairing, servicing, and optimising a wide range of mechanical and electrical equipment across the site. The Engineering Maintenance Technician Apprentice will include training on performing planned maintenance, responding to equipment faults, and contributing to continuous improvement activities to keep all production processes running safely, efficiently, and to precise performance standards.
Your core responsibilities will include:
Perform planned, preventative and reactive maintenance on machinery and equipment
Locate, diagnose and rectify faults on machinery and equipment
Plan and communicate with production management for machine availability
Organise equipment and working area to carry out tasks efficiently and safely and to prevent longer periods than necessary of machinery downtime
Comply with health, safety and environmental regulations and the company’s health and safety rules
Assist the senior engineer and third-party contractors with installs Maintain accurate maintenance records and follow reporting procedures
Monitor levels on stock parts
Source and order stock parts
Liaise with the suppliers of the machinery and equipment to help diagnose and troubleshoot technical issues
Read and interpret drawings, specifications and manuals
Training:
As an Engineering Maintenance Technician Apprentice, you will be studying a Level 3 Engineering Maintenance Technician Apprenticeship
Throughout your apprenticeship with EE Glass, you will be supported by your company mentor and your PETA Learning and Development Coach
Your Level 3 programme will include, a level 3 Engineering work-based qualification delivered by PETA. A practical period of 42 Months and an overall duration 46 months
Training Outcome:
For the right candidate, a full‑time position may be offered upon successful completion of the apprenticeship
Employer Description:EE Glass is a family‑owned insulated glass manufacturer with over 20 years of industry experience. The company specialises in producing high‑performance double and triple‑glazed units, supported by advanced manufacturing technology and an in‑house toughening plant. EE Glass has continued to grow steadily, driven by a commitment to quality, reliability, and exceptional customer service. This long‑term success reflects the dedication of the team and their focus on delivering energy‑efficient glazing solutions to customers across the South Coast.Working Hours :Monday - Friday, 08:30 - 16:30 (half hour lunch).Skills: Genuine engineering interest,Willingness to learn,Can-do attitude,Collaborative mindset,Hands-on worker,Good attention to detail,Good problem solving skills....Read more...
Field Service Engineer Brighton £30,000 - £40,000 Basic + Family Feel Environment + Job Satisfaction + Training + Progression + Van + Work-Life Balance + Stability + Regional Patch + Immediate Start
Are you a Field Service Engineer looking for a role with real job satisfaction? Do you want to join a growing, family-run business that genuinely values its engineers, offers structured training, and long-term progression?
This is a fantastic opportunity to join a rapidly expanding company within the coffee sector, working across a regional patch. With major contracts secured and more growth planned, this business is investing heavily in training centres and developing its engineers. You’ll be part of a close-knit team where you’re known by name, not number, and given the support to progress into more technical or senior roles.
Your Job As A Field Service Engineer Will Include:
Installation, servicing, maintaining, and repairing coffee machines
Fault finding, testing, and diagnosing electro-mechanical equipment
Covering a regional patch across London / South East
Providing excellent customer service and building strong client relationships
Working on a variety of equipment across hospitality, retail, and commercial sites
As A Field Service Engineer You Will Have:
Electro-mechanical background - coffee machines, vending, white goods or similar
Strong fault-finding and diagnostic skills (multimeter use essential)
Full UK driving licence (essential)
Experience working in a field service environment
Live commutable to Brighton and happy to travel regionally
Apply now or contact Billy on 07458 163030 for immediate consideration
Keywords: coffee engineer, coffee machine technician, catering equipment, espresso machines, espresso machines, vending, brighton, crawley, redhill ....Read more...
Field Service Engineer Edinburgh £30,000 - £40,000 Basic + Family Feel Environment + Job Satisfaction + Training + Progression + Van + Work-Life Balance + Stability + Regional Patch + Immediate Start
Are you a Field Service Engineer looking for a role with real job satisfaction? Do you want to join a growing, family-run business that genuinely values its engineers, offers structured training, and long-term progression?
This is a fantastic opportunity to join a rapidly expanding company within the coffee sector, working across a regional patch. With major contracts secured and more growth planned, this business is investing heavily in training centres and developing its engineers. You’ll be part of a close-knit team where you’re known by name, not number, and given the support to progress into more technical or senior roles.
Your Job As A Field Service Engineer Will Include:
Installation, servicing, maintaining, and repairing coffee machines
Fault finding, testing, and diagnosing electro-mechanical equipment
Covering a regional patch across Edinburgh
Providing excellent customer service and building strong client relationships
Working on a variety of equipment across hospitality, retail, and commercial sites
As A Field Service Engineer You Will Have:
Electro-mechanical background - coffee machines, vending, white goods or similar
Strong fault-finding and diagnostic skills (multimeter use essential)
Full UK driving licence (essential)
Experience working in a field service environment
Live commutable to Edinburgh and happy to travel regionally
Apply now or contact Billy on 07458 163030 for immediate consideration
Keywords: coffee engineer, coffee machine technician, catering equipment, espresso machines, espresso machines, vending, Edinburgh, Glasgow, Falkirk, Scotland....Read more...
Technical & Engineering Duties:
Assist with installation, maintenance, servicing, and repair of print finishing machinery
Diagnose and troubleshoot hardware, software, and control system issues
Support preventative maintenance programs
Work with mechanical, electrical, and electronic components
Learn machine control software, HMI interfaces, and diagnostic tools
Software & Systems:
Support software configuration, updates, and fault analysis
Learn how software integrates with mechanical and electrical systems
Develop problem-solving and logical diagnostic skills aligned with the Level 3 Software Development standard
Training & Development:
Complete a Software Development Apprenticeship Level 3
Gain British printing industry training and qualifications
Undertake electrical engineering and electronics courses
Receive on-the-job mentoring from an experienced engineer
Build skills required for future international work assignments
Travel:
Travel across the UK to customer sites as required
Opportunity for international travel as skills and experience develop
Training Outcome:
This apprenticeship is designed to lead into a qualified Print Finishing Technician / Engineer role, with ongoing development into senior engineering, specialist software systems, or international technical support positions
Employer Description:INTELLIGENT FINISHING SYSTEMS Ltd. is one of the leading suppliers of finishing equipment to the graphic arts sectors in the United Kingdom and Ireland. Key long-term supplier and customer relationships span more than 35 years. The brands represented in its portfolio of products are widely recognised as being at the cutting edge of sector-specific technologiesWorking Hours :Monday - Friday, 9.00am – 5.30pm (1-hour lunch break)Skills: Communication skills,IT skills,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Logical,Team working,Initiative,Patience....Read more...
Support machine setup, changeovers, and daily production activities
Assist with fault finding, maintenance, and calibration of equipment
Help ensure equipment is operating efficiently and safely
Work with the team to meet production targets and priorities
Record maintenance activities and update systems where required
Contribute to continuous improvement and problem-solving tasks
Follow all health & safety and GMP procedures at all times
Use PPE correctly and maintain a clean, safe working environment
Assist with risk assessments and safe working practices
Report accidents, near misses, and hazards promptly
Training:
Receive one-to-one and team-based training in mechatronics and engineering processes
Gain hands-on experience with CNC machinery and production equipment
Work towards a Level 3 Mechatronics Maintenance Technician qualification
Training Outcome:
Pay increases upon completion of the apprenticeship
Guaranteed full-time position upon successful completion
Additional 8% skills allowance once qualified
Employer Description:Formed in 1977, Smart was initially established to supply high-quality windows and doors for the residential market. Over the next 40 plus years, we have grown beyond all recognition and are now the leading supplier of aluminium systems in the UK, supplying both the residential and commercial markets with an extensive range of high-performance systems.
During those 40 plus years our standards and ethos have remained unchanged; with an unwavering commitment to quality and value and to meeting the evolving needs of our customers.Working Hours :37.5 including lunch breaks.
Monday to Friday.
Day and shift pattern available (1 of each).
Shift pattern: 6:00am–2:00pm and 2:00pm–10:00pm.Skills: Communication skills,Attention to detail,Team working,Initiative....Read more...
Duties and responsibilities
To assist and carry out vehicle inspection examinations in line with VOSA procedure and Company policy
To assist in the test and check systems and components are safe, secure and working properly
To assist in diagnose faults by isolating systems or components that may have caused or potentially cause a problem
To assist in repair or replace worn parts ahead of the vehicle’s breakdown or damage
To assist in ensuring authorisation is obtained to repair or fit parts in line with Company Procedure
To assist in effectively and efficiently use various specialist equipment, including hand-held and onboard compression gauges and diagnostic computer
To assist where supervised in the safely and effectively use power tools, machine tools and equipment as and when required and safe to do so, for the task for which it was designed and return to correct place of storage after use
To assist where supervised in the use common hand tools including screwdrivers, wrenches, and pliers, to work on small-scale parts
Training Outcome:The training will give the individuals a foothold into furthering a career with SFS as a qualified technician.Employer Description:Founded in 1985 and employ almost 1450 people. We are a UK specialist bank. Our lending products include mortgages for landlords and loans for business customers.
Sustainability is central to our long term success. It influences every aspect of our business from the markets we enter and the products we offer, to the support we give our customers and the culture that we nurture here at Paragon. We have a responsibility to use our influence and our resources wisely and we work diligently to support the communities in which we operate and protect the environment upon which we all depend.Working Hours :40 hours per week, Monday to Friday, typically 8.00am to 5.00pm (one hour for lunch).Skills: Communication skills,Problem solving skills,Number skills....Read more...
To operate the ferrule laser engraving machine to engrave ferrules prior to them being used to assemble hoses
To help produce hoses by pushing fittings into ferrules and adding caps to fittings to ensure cleanliness is always achieved
To operate machinery such as swaging machines and hose cutters after training
To support the kitting of hoses into hose kits ready for dispatch to customers
To carry out respective quality checks as per the company’s policy
To ensure that work areas are always kept clean, tidy and hazard free
To actively contribute to the overall team activities and promote good working practices
To log errors and offcuts as required
To report all job card amendments to the team leader to improve efficiency
To report near misses, accidents and incidents as required
Adhere to company quality, health and safety policies
Responsible for helping the business to identify opportunities for improvement as part of our business management and quality strategy. Also, to flag up any risks to our QMS from the operations you carry out
Be involved with and support any audits within your department and comply with all internal/external audit resources and certification bodies
Formal and in-house training will be provided
Training:
Lean manufacturing operative level 2 qualification
Functional Skills Level 2 maths and English to be taken if an equivalent grade has not been achieved
BFPA training course in hose assembly
Training Outcome:
Onto full hose assembly technician and potentially then to become a team leader.
Employer Description:Fluid power products company including producing hose kits for OEM across the UK plus Onsite hose repair company across the UK.Working Hours :Monday to Friday 7.30am until 5pm depending on age. Every third Saturday morning 8.30am until 12 noon.Skills: Communication skills,Attention to detail,Number skills,Logical,Team working,Practical....Read more...
Together with invaluable commercial and practical experience, you’ll gain several academic and vocational qualifications throughout your time with your employer and Make UK, which are fully paid for, including:
Assist in preventative, predictive and routine maintenance work
Identify and ensure critical spares are stocked and reordered
Co-ordinate with suppliers to supply spare parts for machines
Carry out TPM (Preventative Maintenance) schedules
Carry out the maintenance of plant machinery, electrically
Identifying and liaise with suppliers of maintenance services when required
Investigating maintenance problems affecting production and identify improvements
Maintain and record work and machine breakdown history
Assist and learn from experienced electrical workers to help build skillset
Focus strongly on safety, knowledge of electrical systems and building good electrical systems
Work within and abide by the company policies
Undertake all onsite training to successfully complete the training
Attend college regularly to become a fully qualified Electrical craftsman with BTEC electrical engineering
Undertake an NVQ qualification and learn and integrate the knowledge, skills and experiences
On completion of your studies, you will achieve your full apprenticeship certification that will prove competence as a Level 3 Electrical Engineering Technician.Training:Mechatronics Maintenance Technician Level 3.Training Outcome:Employment opportunities and career progression.Employer Description:Tata Steel is one of the world’s top 10 steel producers. The combined group has an annual aggregate crude steel capacity of more than 33 million tonnes with approximately 80,000 employees across four continents. We’re part of the Tata Group, one of the largest, most diverse conglomerates in the world with businesses in the UK including Tata Steel, Jaguar Land Rover and Tetley Tea.
Sustainability is at the very heart of what we do and we are dedicated to managing our operations responsibly and to continuously improving our performance. Innovating for tomorrow, making a positive impact today.
Tata Steel in the UK is committed to our ambition of reducing energy consumption and to becoming a carbon neutral steelmaker by 2045, to find out more about our journey click here Stoves cooking less carbon – YouTube
To learn more about who we are and what we can offer our future employees, please click on the link to watch the following video: Tata Steel – A place you can thrive – YouTube Working Hours :Initially apprentices will work days 7am - 3pm moving to a 2-shift rota while on day release at Make UK in Aston, this allows the business to match the apprentice with a dedicated engineering shift manager and their team.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Patience....Read more...
Understanding and applying principles, practices, and legislation for terminating and connecting conductors, cables, and cords in electrical systems
Preparing and installing wiring systems and electro-technical equipment in buildings, structures, and environmental settings
Applying electrical principles to the design, building, installation, and maintenance of electrical equipment and systems
Working from drawings and scopes of work
Following company health and safety rules and ensuring compliance with all processes and procedures
Ensuring electrical safety is a core part of your responsibilities, and you must adhere to safe working practices to protect yourself and others
Training:Engineering Maintenance Technician - Single Discipline Level 3.
The apprenticeship follows a 3.5-year programme, with the first year spent off the job at CATCH in Stallingborough. This would be Monday - Friday 8.30am - 4pm
The remainder of the apprenticeship is then completed onsite with the employer
Training Outcome:Successful completion of the apprenticeship could lead to a higher-level apprenticeship or full-time employment for the right candidate.
You will have developed a variety of interchangeable skills and have an in depth understanding of manufacturing and processes. Employer Description:Quartzelec is an independent, multi-disciplined service provider that employs over 600 people in the UK and overseas with a turnover in excess of £90 million. The company provides a range of contracting and rotating machine services, as well as support products. Quartzelec demonstrates expertise in the repair and maintenance of motors and generators and has over 100 years of experience in the industry. The company is an engineering authority with a strategic global geographical presence and works to meet the unique needs of its clients. A unique experience working for a business that values autonomy by gifting employees with responsibility and ownership in their field of speciality. Working Hours :Mondays to Thursdays - 08:00 to 16:30
Fridays - 08:00 to 15:30
You may be required to work additional hours as required in the normal execution of your duties.Skills: Communication skills,Team working,Willingness to learn,Curious....Read more...
Field Service Engineer Derby £30,000 - £40,000 Basic + Family Feel Environment + Job Satisfaction + Training + Progression + Van + Work-Life Balance + Stability + Regional Patch + Immediate Start
Are you a Field Service Engineer looking for a role with real job satisfaction? Do you want to join a growing, family-run business that genuinely values its engineers, offers structured training, and long-term progression?
This is a fantastic opportunity to join a rapidly expanding company within the coffee sector, working across a regional patch. With major contracts secured and more growth planned, this business is investing heavily in training centres and developing its engineers. You’ll be part of a close-knit team where you’re known by name, not number, and given the support to progress into more technical or senior roles.
Your Job As A Field Service Engineer Will Include:
Installation, servicing, maintaining, and repairing coffee machines
Fault finding, testing, and diagnosing electro-mechanical equipment
Covering a regional patch across London / South East
Providing excellent customer service and building strong client relationships
Working on a variety of equipment across hospitality, retail, and commercial sites
As A Field Service Engineer You Will Have:
Electro-mechanical background - coffee machines, vending, white goods or similar
Strong fault-finding and diagnostic skills (multimeter use essential)
Full UK driving licence (essential)
Experience working in a field service environment
Live commutable to Derby and happy to travel regionally
Apply now or contact Billy on 07458 163030 for immediate consideration
Keywords: coffee engineer, coffee machine technician, catering equipment, espresso machines, espresso machines, vending, Derby, nottingham This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.....Read more...
