Ensure machine setup conditions prior to production start-up are all correct to ensure a smooth startup and minimise any plant downtime or material scrap
Load machines with the correct raw materials according to production requirements
Ensure material hoppers, dryers and loaders are filled and running correctly
Accurately record and update material usage
Supply operators with materials, packaging and components when required
Ensure high standards of safety, plastic processing, machine setup, mechanical best practice and due diligence are paramount
Provide consistent and reliable machine setting service in line with standard operating procedures
Machine condition setting for a range of injection moulding presses in a safe, efficient and effective manner, adhering to standard operating procedures
Ensure initial machine condition setup is correct to ensure startup of the machine without problems and minimise downtime, material scrap and production startup issues
Safe setup and operation of injection moulding machines at all times
Identify any potential machine defects as soon as possible and provide effective communication to Shift Managers, Maintenance Engineers and Production staff
Ensure best practice machine condition setting is adopted at all times
Full compliance with UK statutory health and safety standards
Full compliance with LOLER and PUWER regulations
Establish good working relationships with production, maintenance and other key members of the factory team. Adhere to all instructions set by the Shift Manager
Training:
Engineering and Manufacturing Support Technician Level 3
Mechanical and electrical principles
Health and safety in manufacturing
Technical drawings and problem-solving
Use of workshop tools and diagnostic equipment
Training Outcome:
Comprehensive training and mentoring throughout the apprenticeship
Real hands-on experience with state-of-the-art machinery
Long-term career development and progression opportunities
A safe, inclusive, and professional working environment
Employer Description:Counterplas is a leading technical plastic injection moulder operating within the UK, With over 25 years of experience, we pride ourselves on innovation, efficiency, and sustainability — continually investing in modern equipment, automation, and the development of our people.Working Hours :Initially starting on days but will be on a double day shift system going forward (6.00am - 2.00pm and 2.00pm - 10.00pm rotating weekly).Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Team working,Initiative,Reliable,Punctual,Positive attitude....Read more...
Your training will be on a one-to-one basis, you will be mentored by an experienced member of staff, who will guide you in every aspect of your role.
No experience is needed, but we are seeking an individual with a strong can-do attitude, self-motivation and the ability to work as part of a team.
You will need to be an enthusiastic and committed individual who has an excellent attention to detail and has good problem-solving skills.
You will learn to set up and run an array of different machines, guided by experienced staff members. Initially, you will concentrate your time learning and perfecting your skills on a Bobst 126, which is the largest format hot foil machine in the UK.
The job role will include the following:
1. Preparing the machine for production
2. Running the press.
3. Maintaining quality standards
4. Completing maintenance tasks on the machine.
5. Completing paperwork.
6. Understanding Health & Safety.
Training tasks will be assigned each day. These tasks will give you an in-depth knowledge of how to prepare, run and manage each order. Training:Your training will be both practical and theory-based.
You will be studying for a Level 3 Print Technician qualification.
The training will last for 30 months and will cover all aspects needed to become a fully qualified machine operator.
Training for the practical and theory elements will take place on site at your place of work.Training Outcome:After training is completed, the goal would be to establish yourself as a machine operator, to continue to develop the knowledge you have gained while training and learn all the different machines within the factory.
Once you have a strong understanding of the processes and machinery, there is a potential to progress into a team leader position. Employer Description:Blockfoil Manchester Limited are a market leader in foil printing and embossing.Working Hours :5 days, Monday – Friday (alternate shifts) 6am – 2pm or 10am – 6pm.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness,Reliability & Punctuality,Enthusiastic,Adaptability....Read more...
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
Manufacturing Technician required to work on electronic and mechanical aspects of subsea equipment assembly and systems including tests, measurements, operations and process controls.
Responsibilities
Work from job packets, routings, work orders, wire lists, quality travelers and bills of material.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them.
Maintain skills in electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Requirements
Production Test and Production Assembly experience.....Read more...
Role and responsibilities will include:
Manual component insertion
Component preparation
Hand soldering and wiring
Operation of a flow solder machine
Mechanical assembly
Cable work
Rework
Testing of basic product
Operation of elective solder machine
De-panelling of printed circuit boards
Training:
Engineering & Manufacturing Support Technician, Level 3
Weekly attendance at Riverside College, Widnes
Training Outcome:
There may be opportunities to apply for positions within the company, if these arise following the Apprenticeship
Employer Description:Norcott is a leading provider of electronic design and assembly services. We work with our customers at the leading edge of new product development from initial design, prototyping and certification through to volume manufacture, ongoing service, maintenance and repoar. In short - the compete product lifecycle. Working Hours :Monday - Thursday, 7.00am - 5.00pm.Skills: Attention to detail,Problem solving skills,Team working,Patience,Manually dexterous,Interest in electronic design,Keen to learn about assembly....Read more...
You will be predominantly involved in highly skilled, complex and precision work, machining components from specialist materials using conventional and/or CNC machine tools such as centre lathes, vertical and horizontal milling machines, horizontal and cylindrical grinding machines, single and multi-axis CNC machine tool centres.Training:An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.Training Outcome:Fully qualified Level 3 Machining Technician Employer Description:Founded in 1974 by David Arnold, Arrow Precision Engineering is a global leader in the design and manufacture of bespoke high-performance powertrain components. Our journey has taken us from a toolmaker, through subcontract engineering to globally renowned manufacturer of race engine components.
Behind our business and our products, we believe in Quality, Innovation and Performance above all else.Working Hours :Monday-Thursday 7am-4pm
Friday 7am-1pmSkills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
Mechanical Manufacturing Technician required to use manual hand tools to mechanically assemble hydraulic and mechanical assemblies the ideal candidate will be able to operate or program automated machine tools.
Requirements
Production or Manufacturing experience ideally of heavy machinery, maritime or subsea parts.
Mechanical Assembly skills.
Responsibilities
Work from job packets, routings, work orders, wire lists and bills of material.
Maintain production tools and equipment.
Tests and measure assemblies as per operational and process controls.
Troubleshooting and diagnose defects and repair them.....Read more...
Mechanical Manufacturing Technician required to use manual hand tools to mechanically assemble hydraulic and mechanical assemblies the ideal candidate will be able to operate or program automated machine tools.
Requirements
Production or Manufacturing experience ideally of heavy machinery, maritime or subsea parts.
Mechanical Assembly skills.
Responsibilities
Work from job packets, routings, work orders, wire lists and bills of material.
Maintain production tools and equipment.
Tests and measure assemblies as per operational and process controls.
Troubleshooting and diagnose defects and repair them.....Read more...
During your period of training, you will learn how to install, service and repair breakdowns of Mazak CNC Machines
Learning how to diagnose faults, check machine alignments and change electrical drives, motors and encoders
Once trained, you will be visiting customers; you should expect to be staying away from home, depending on the distance to the customer's premises
Whilst completing your apprenticeship, you will be required to spend the first and second year at our state-of-the-art production facility, our European Headquarters based in Worcester, Worcestershire
Training:Formal training is delivered at HWGTA, located in Worcester (WR4 9GN).
Duration approximately 40-45 months.
Year 1, between 22-39 weeks are spent at HWGTA Training Centre developing practical engineering skills, alongside one day per week in the classroom, completing the theoretical elements of the EAL Level 3 Diploma in Advanced Manufacturing Engineering.Year 2, predominantly based in your company, returning to the Training Centre one day per week to continue and complete the specialised elements of their Level 3 Diploma (Development Knowledge).
Years 3-4
Based full-time in your company, developing practical skills and knowledge in preparation for the End Point Assessment to gain your Mechatronics Maintenance Technician Level 3.Training Outcome:
Specialisation in a core module
Senior Service/ Breakdown Engineers
Employer Description:Yamazaki Mazak UK Ltd is based at the European manufacturing plant in Worcester, which also houses the European Technology Centre (ETC) and gives customers direct access to support from the UK’s largest and most expert team of engineers, with vast experience in machine tool applications for almost every industry sector.
Our European Manufacturing Plant is not just a machine tool assembly plant. We pride ourselves in managing a complete operation. We machine our castings, we make our own spindles, our own turrets, our own tool magazines and our own sheet metal covers.
We’re committed to manufacturing in Europe and have continually invested in new machinery and equipment for the factory since its opening in 1987.Working Hours :Normal working hours will be from 08:15 to 16:30, Monday to Friday, but can be adjusted starting as early as 07:45.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working,Demonstrate Practical ability,Hardworking,Self-motivated,Good time management,Work well under pressure....Read more...
Role responbilities will include:
You will be liaising with the design team to get an understanding of the project in hand
Quality checking each component prior to assembly
Assisting with the machine setup, once it is completed
Assemble mechanical parts to a high standard, ensuring tolerances are adhered to along with adherence to build instructions/guidelines
Assemble & wire control panels by following electrical schematics
Gather parts required for the mechanical or electrical build process
Assist engineers during the machine setup process
Assist in the preparation of machinery for despatch, ensuring that all quality checks are carried out
Training:
The apprentice will be working towards the Level 3 Engineering and Manufacturing Support Technician Apprenticeship Standard
Qualifications include the EAL Level 3 Diploma in Engineering and manufacturing support technologies
Training Outcome:
Multi-skilled engineer, Workshop Technician, Field Service Engineer, etc
Employer Description:Established in 1993, we are the leading supplier of high-quality labelling and sleeving machines. Brands trust us to deliver the highest quality labelling and sleeving, with co-packers and OEM partners relying on us to optimise production and maximise throughout. From straightforward set-ups to bespoke and fully modular lines, our systems are recognised for their high-quality design, reliability and ease of use. Our stainless steel systems are suitable for almost any production environment, with hundreds of installations all over the world. Sovereign Labelling provides clients with a comprehensive range of solutions covering all production line needs, including; labelling, sleeving and servicing and maintenance.Working Hours :Monday to Thursday, 07:30 - 16:30 and Friday, 07:30 - 13:30. With a 10 minute break at 10:30 and a half hour lunch break at 13:00Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience,Physical fitness....Read more...
You will receive practical training across our Finishing and Digital Print departments.
Duties will include; operating digital printing equipment, preparing printed work for finishing, folding, stitching, trimming, booklet making, mailing and packing customer orders. You'll work alongside experienced operators, learning industry best practice, quality standards and safe working methods.
Training will include:
Health & Safety
Digital print production
Print finishing techniques
Machine set-up and operation
Basic machine maintenance
Quality control
Customer requirements
Workflow management
You will gain experience using equipment including:
Fujifilm Revoria EC1100
Ricoh Pro C9110
Konica Minolta Bizhub
Watkiss PowerSquare Booklet Maker
Heidelberg Stitchmaster
Horizon AFC-566 Folder
Heidelberg Stahl Folder
Polar Guillotine
Neopost DS-200 Inserting Machine
Horizon PUR Binder
Training will be delivered through a combination of workplace learning and support from the apprenticeship provider.Training:
All training will be carried out at our Wolverhampton site working alongside experienced technicians
Once the apprenticeship is completed and the final exams have been passed you will achieve a Level 3 Print Technician qualification
Training Outcome:
A successfully qualified apprentice will be offered a full time position
As a professional member of the team, optional training in other departments will be available, with potential career progression for ambitious individuals
Employer Description:Based in Wolverhampton Lion FPG was established in 1928 and has grown to become a trusted partner to our customers. One company, one philosophy – many solutions. One of just a handful of certified Carbon Balanced Printers in the UK.Working Hours :Monday - Friday, 08:30 - 17:00, with one hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,Patience,Physical fitness....Read more...
With appropriate support and supervision, the apprentice will…
Carry out the maintenance of car park machinery, correct faults and carry out first-line maintenance to ensure business continuity. Report any unresolved issues to the Senior Car Park Technician.
Assist the Senior Car Park Technician in communicating via an on-site intercom with members of the public in order to resolve enquiries, complaints and faults.
Carry out cleansing operations and/or oversee cleansing operations in the council’s multi-storey car parks and pay and display car parks across the borough.
Monitor the use of the council’s car parks to ensure the safety of users and the security of assets.
Follow Standard Operating Procedures, Risk Assessments, COSHH regulations and all other Parking Services guidance documents to ensure personal safety and the safety of others.
Drive a vehicle for the purpose of carrying out parking services operations, ensuring that vehicles and plant are clean and in good working order.
Assist the Senior Car Park Technician to ensure business continuity by recording and monitoring stock levels, including ticket/receipt rolls, machine parts and maintaining car park machinery (Barriers, pay stations, entry/exit terminals). Ensure communication devices remain in operation at all times (Servers, networks, intercom).
Assist the Senior Car Park Technician in undertaking a daily schedule of machine inspections to maximise availability of payment options for customers. Identify and report any incidents of misuse, such as encampments and fly-tipping.
Represent Parking Services in accordance with the standards expected, including the carrying of an identity card and the wearing of the uniform supplied at all times. Communicate with our customers, management team and members of the public in a polite and professional manner, placing the highest possible emphasis on customer care, engagement and feedback.
Training:
An apprenticeship includes regular training with a college or other training organisation
At least 20% of your working hours will be spent training or studying on employer sites or via Microsoft Teams
Delivery is to be discussed with the training provider and the hiring manager must suit operational needs
Training Outcome:
On successful completion of the apprenticeship, the post holder will progress to the substantive post of Car Park Technician.
Employer Description:Our work spans over 3,900 colleagues across hundreds of roles, professions and services, making us one of the most diverse and complex employers in the region. We are responsible for delivering a wide range of essential public services and strategic priorities that shape the places, communities and lives of our residents every single day.
From frontline delivery to professional, technical and corporate roles, our organisation brings together expertise from across disciplines to respond to the evolving needs of our borough — supporting people, strengthening communities and driving long-term change at scale.Working Hours :Hours of work - 7.4 hour shift times between 06:15am and 01:30am and over 7 days a week on a rolling rota.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Non judgemental,Patience....Read more...
LOTO
Visual quality
Colour and material changes
Basic machine setting and operation
Basic processing settings and adjustments
Basic Toolroom
Training Outcome:
Shift Technician
Employer Description:Alpla is a world leader in the development and production of plastic packaging solutions.
Milton Keynes is 1 of 8 sites in the UK.Working Hours :Monday - Friday, 7.00am - 4.00pm.Skills: Communication skills,Attention to detail,Organisation skills,Number skills,Analytical skills,Logical,Team working....Read more...
During your period of training, you will learn how to install, service and repair breakdowns of Mazak CNC Machines
Learning how to diagnose faults, check machine alignments and change electrical drives, motors and encoders
This is a field-based role for the Midlands area of England
Once trained, you will be visiting customers; while living in the Midlands, you should expect to be staying away from home, depending on the distance to the customer's premises
Whilst completing your apprenticeship, you will be required to spend your 2nd year at our state-of-the-art production facility, our European Head Quaters in Worcester
Training:
Formal training is delivered at HWGTA, located in Worcester (WR4 9GN)
Duration approximately 40-45 months
Year 1, between 22-39 weeks are spent at HWGTA Training Centre developing practical engineering skills, alongside one day per week in the classroom, completing the theoretical elements of the EAL Level 3 Diploma in Advanced Manufacturing Engineering.
Year 2, predominantly based in your company, returning to the Training Centre one day per week to continue and complete the specialised elements of their Level 3 Diploma (Development Knowledge).
Years 2-4, based full-time in your company, developing practical skills and knowledge in preparation for the End Point Assessment to gain your Mechatronics Maintenance Technician Level 3.Training Outcome:
Specialisation in a core module
HNC/Level 4 Apprenticeship recommendations based upon college feedback and grades, general attitude, application, timekeeping, etc. Foundation Degree or Management qualifications
Team Leader
Application Engineers
Production Engineers
European Engineering and Automated Solutions Engineers
Quality Inspectors
Senior Service/ Breakdown Engineers
Employer Description:Yamazaki Mazak UK Ltd is based at the European manufacturing plant in Worcester, which also houses the European Technology Centre (ETC) and gives customers direct access to support from the UK’s largest and most expert team of engineers, with vast experience in machine tool applications for almost every industry sector. Our European Manufacturing Plant is not just a machine tool assembly plant. We pride ourselves in managing a complete operation. We machine our castings, we make our own spindles, our own turrets, our own tool magazines and our own sheet metal covers. We’re committed to manufacturing in Europe and have continually invested in new machinery and equipment for the factory since its opening in 1987.Working Hours :Normal working hours will be from 08:15 to 16:30, Monday to Friday, but can be adjusted starting as early as 07:45.Skills: Communication skills,Organisation skills,Problem solving skills,Number skills,Team working,Demonstrate Practical ability,Hardworking,Self-motivated,Good time management,Work well under pressure....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment.....Read more...
As an Apprentice Engineer, you’ll work alongside experienced engineers to build, test, and install advanced inspection and automation systems.
Key duties include:
Assisting with assembly of machine vision systems (cameras, lenses, lighting)
Supporting testing, system setup, and image data collection
Learning to configure and optimise image-processing software
Helping troubleshoot engineering and software issues
Producing technical documentation (test logs, reports, wiring notes)
Gaining exposure to PLCs, robotics, and automation integration
Maintaining workshop/lab environments and supporting engineering tasks
You’ll apply what you learn in college directly to real engineering projects
Training:You will complete a Level 4 Engineering Manufacturing Technician Apprenticeship, gaining:
Industry-recognised qualification
Practical engineering and automation experience
Day-release attendance at Oaklands College, Welwyn Garden City
Mentorship from experienced engineers
Training Outcome:As well as a potential full time position within the company, this apprenticeship can lead to roles such as:
Application Engineer
Automation Engineer
Machine Vision Specialist
Field Service Engineer
Employer Description:Acrovision is a leading UK provider of industrial barcode reading and vision inspection systems, supporting industries such as automotive manufacturing, pharmaceuticals, logistics, and food production. With a dynamic and growing technical team, Acrovision delivers cutting-edge solutions including installation, commissioning, and technical support across a range of high-tech automation systems.Working Hours :Monday to Friday - Times TBC.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Presentation skills,Administrative skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative....Read more...
Line Setup - loading parts into feeders
Line Run - changing feeders as required
Line dis-assembly - unloading unused parts from the machine for return to stores
Regular maintenance as required and advised by senior members of the team
You will:
Observe, learn and understand a wide range of engineering skills and processes whilst under the guidance of skilled technical staff
Demonstrate these skills and processes as the training period progresses by working independently or as part of a team and to undertake tasks as instructed
Learn and understand the importance of Health and Safety within the workplace and adhere to all policy and legislative requirements
Learn how to maintain workshop equipment and keep it in good working order
Training:Engineering Maintenance Technician - dual discipline Level 3.
You will work 4 days a week on site, with one day spent at Hartlepool College.Training Outcome:
SMT Operator
SMT Technician
Maintenance Technician
Employer Description:The Cicor Group is a globally active provider of full-cycle electronic solutions from research and development to manufacturing and supply chain management. Cicor has approximately 4,600 employees in 14 countries who are serving leaders from the medical, industrial and aerospace & defence industries. Cicor creates value to its customers through the combination of customer-specific development solutions, high-tech components, as well as electronic device manufacturing.
The Hartlepool Site, which employs 130 staff, provides technology-focused manufacturing including PCB assembly, box build, test and the integration of design-led connectivity and power solutions.Working Hours :Monday to Thursday 8am to 4.30pm, Friday 8am to 2.30pmSkills: Communication skills,Attention to detail,Problem solving skills,Analytical skills,Logical,Team working....Read more...
Equipment Installation & Maintenance
Working with another member of staff, install, set up, and maintain professional print devices, including both hardware and software
Provide customer training on devices to help users get the most out of their equipment
Diagnose and resolve technical faults, working with other members of the team
Component & Equipment Refurbishment
Take apart and clean imaging drums
Replace worn parts with new and repackage ready for engineer use
Perform toner refills where necessary (all safety equipment provided and instructions)
Identify work to be undertaken using machine management lists
Allocate stock if available, order stock where not to hand
Prepare equipment for refurbishment (remove worn parts, set aside for refurbishment or replacement)
Fully clean all areas of machine using equipment and materials provided
Reassemble all parts inside machine to manufacturer's specification
Test and adjust where required
Clean outer casings and prepare for delivery
Training course and engineer accompaniment
Undertake all web-based learning modules over a 12-month period and obtain a minimum pass rate
Accompany senior engineers and be involved with processes involved in repair and adjustments
Apply learning to equipment in showroom and workshop
Learn proper use of cleaning equipment and techniques
Other duties
Keep warehouse and workshop area clean and tidy
Maintain stock levels of cleaning products and refurbishment parts
Undertake jobs provided by administrator, directors or other engineers when required
Adopt processes to ensure timely and efficient working methods to ensure steady supply of refurbished parts
Make deliveries to sites, engineers and when appropriate undertake straightforward repairs or replace parts, subject to training delivery
Help with deliveries and equipment installations when required
Training:
Level 3 Information Communication Technician apprenticeship
Day release training with Burnley College
Training Outcome:Potential for full-time employment upon successful completion of the apprenticeship.Employer Description:In the last 10 years, Production Print Direct has grown to become the UK’s leading independent specialist for cut sheet digital press technology. We enable our clients to meet the market needs of their customers for what is rapidly becoming a “same day” print service with software to speed up the prepress process and faster equipment to keep on top of production requirements. Whether downsizing or upscaling, PPD have the experience and technology to work with our clients for the next step of their own evolution. Working Hours :9am to 5pm with half an hour lunch (unpaid).Skills: Communication skills,IT skills,Attention to detail,Analytical skills....Read more...
You will learn and develop the fundamental skills required to operate, maintain, and troubleshoot machine shop equipment
Under the guidance of experienced machinists, you will support the machining of components to specification while gaining hands-on experience in a manufacturing environment
This role is ideal for individuals seeking a long-term career in precision machining or engineering
You will assist experienced machinists with the setup and operation of manual and CNC equipment (e.g., mills, lathes, grinders
Learning to read and interpret engineering drawings, blueprints, and technical specifications will be part of your role
You will support the machining of parts to required tolerances, quality standards, and production schedules
Performing basic machine adjustments, tool changes, and routine preventive maintenance will be part of your role
You will measure and inspect components using calipers, micrometers, gauges, and other precision tools
Participating in ongoing training, coursework, and competency development will be key for this role
Training:
Machining Technician Level 3 Apprenticeship Standard
On the job training in the workplace
Taught sessions via New College Swindon
Training Outcome:Permanent employment and career in Production.Employer Description:Linde AMT UK are 2,500 engineers, technologists and coating experts across more than 35 sites in 12 countries globally. Linde offers a comprehensive array of high-performance coatings and technologies to the aviation, energy and other industries. By continuously advancing coatings technologies, Linde helps customers improve environmental performance, decrease energy consumption, extend component life, improve productivity, minimize downtime, reduce operating costs and produce high-quality products. Additional information can be found at www.praxairsurfacetechnologies.com. In the UK we offer different applications across two sites; Swindon and Lincoln. We’re passionate about what we do and don’t tolerate anything but the highest quality yet safest output. Together we contribute to being the best performing surface technology company in the world.Working Hours :Monday to Friday 7am-3 pm with a 30-minute unpaid break.Skills: Communication skills,Attention to detail,Problem solving skills,Number skills,Team working,Willingness to learn,Strong interest in engineering....Read more...
You will rotate between our Studio and Digital Print departments, learning every stage of the print production process.
You'll prepare artwork for print, check customer files, produce digital print, operate finishing equipment where required and ensure work meets our quality standards. Full training and support will be provided throughout your apprenticeship.
Training will include:
Health & Safety
Preparing artwork for print
File checking and proofing
Colour management
Digital print production
Machine operation
Quality assurance
Customer specifications
Production workflow
You will gain experience using equipment including:
Fujifilm Revoria EC1100
Ricoh Pro C9110
Konica Minolta Bizhub
Watkiss PowerSquare Booklet Maker
Astrojet S1 Envelope Printer
Neopost DS-200 Inserting Machine
Within the Studio you will learn artwork preparation, file management, proofing and production planning using industry-standard software and workflows.
Training will be delivered through a combination of workplace learning and support from the apprenticeship provider.Training:
All training will be carried out at our Wolverhampton site working alongside experienced technicians
Once the apprenticeship is completed and the final exams have been passed you will achieve a Level 3 Print Technician qualification
Training Outcome:
A successfully qualified apprentice will be offered a full time position
As a professional member of the team, optional training in other departments will be available, with potential career progression for ambitious individuals
Employer Description:Based in Wolverhampton Lion FPG was established in 1928 and has grown to become a trusted partner to our customers. One company, one philosophy – many solutions. One of just a handful of certified Carbon Balanced Printers in the UK.Working Hours :Monday - Friday, 08:30 - 17:00 with one hour lunch break.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Team working,Initiative,Patience,Physical fitness....Read more...
Key Responsibilities
Support the operation and maintenance of manufacturing equipment used in production
Maintain equipment across the production line, including welder calibration, dehumidifier maintenance, air plumbing systems, and production floor layout adjustments
Support with machine setting and operation
Assist production teams where required to meet manufacturing demands
Learn and understand the operation of all production machinery to support troubleshooting and fault finding
Support the introduction of new machinery and processes into manufacturing
Build duplicate production machines from engineering schematics and drawings once designs have been approved and validated
Test and evaluate new manufacturing processes and techniques, providing feedback to engineering teams
Develop and maintain process instructions and manufacturing documentation
Use measurement tools and inspection equipment to verify components, tooling, and assemblies meet specification requirements
Support quality inspection and testing activities
Follow all company health, safety, and quality procedures
Departmental Training & Development Exposure
Hardware Engineering – Build simple electronic circuits and develop understanding of basic electronics and PCB assemblies
Mechanical Engineering – Design simple mechanical parts/components and use CAD and 3D printing technology
Stores & Materials Control – Goods-in inspection, kit picking, stock control systems and VSS operation
SMT (Surface Mount Technology) – Programming pick-and-place machines, ODB and BOM collation, SMT component recognition, screen printing operations, paste application theory, machine setup and operation, AOI, and vapour phase soldering
Production Assembly – Use of production documentation, BOMs, through-hole component insertion, relay assembly, wave soldering, hand soldering, wire preparation, crimping, and swash machine operation
Inspection & Quality – Roving inspection, continuity checking, and final inspection processes
Test Engineering – Product testing procedures and understanding of production test methods and equipment
Training:
The apprentice will be working towards the Level 3 Engineering and Manufacturing Support Technician Apprenticeship Standard
Qualifications include the EAL Level 3 Diploma in Engineering and manufacturing support technologies
Training Outcome:Within Pickering there are possible career routes into Engineering, Test, R&D, Product Management or Customer Service.Employer Description:Pickering Interfaces is a global leader in the design and manufacture of modular signal switching, simulation and connectivity solutions for electronic test and verification. Headquartered in Clacton-on-Sea, Essex, with sales, support and manufacturing operations across Europe, North America and Asia, we have been innovating in test and measurement technology for over 35 years as part of the Pickering Group, whose heritage dates back to 1968. Currently we have approximately 600 employees worldwide. Our products are used by leading organisations in aerospace, automotive, defence, energy, medical and semiconductor industries worldwide, and we pride ourselves on combining engineering excellence with a supportive, customer-focused culture.Working Hours :Monday to Friday, 8.00am - 4.00pm, with a 30 minute unpaid lunch and two 15 minute paid breaks.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Team working,A good sense of humour,Curious about engineering,Keen to learn and develop,Practical/hands on skills,Reliable,Committed,Interest in product design....Read more...
Duties and responsibilities will include:
The production of high complexity assemblies using Juki and Europlacer machines
Line configuration / set up
Kitting and de-kitting of surface mount machines
Machine operation and programming
Solder paste printing
Manual insertion of components
In process quality inspection
Rework
Training:
Engineering & Manufacturing Support Technician, Level 3
Weekly attendance at Riverside College, Widnes
Training Outcome:
There may be opportunities to apply for positions within the company, if these arise following the Apprenticeship
Employer Description:Norcott is a leading provider of electronic design and assembly services. We work with our customers at the leading edge of new product development from initial design, prototyping and certification through to volume manufacture, ongoing service, maintenance and repoar. In short - the compete product lifecycle. Working Hours :Working hours are 7am to 5pm Monday to Thursday.Skills: Attention to detail,Problem solving skills,Team working,Patience,Manually dexterous,Interest in product lifecycle....Read more...
Assist in setting up and operating print finishing equipment (e.g. guillotines, folders, stitchers, laminators, binders)
Learn to carry out finishing tasks such as cutting, folding, binding, creasing, and laminating
Monitor quality of finished products to ensure they meet required specifications
Prepare work for despatch, ensuring accuracy and presentation standards are met
Manage workflow to meet production schedules and deadlines
Follow all health and safety procedures at all times
Work collaboratively with the wider production team
Training:
Employer: Mayfield Press Oxford Ltd
Training Provider: BPIF Training
Apprenticeship Standard: Print Finishing Technician Level 3
Duration: Typically 24-36 months
On-the-Job Training: 4 days per week (onsite at Mayfield Press)
Off-the-Job Training: 1 day per week (home-based coursework + BPIF learning)
Training Outcome:Upon completion, the apprentice would usually move into a fully competent operator role, such as:
Print Finishing Operator
Bindery Technician
Finishing Machine Operator
Employer Description:Mayfield are a successful, growing and ambitious print services provider who have been trading for over 25 years. We have an enviable reputation as one of Oxfordshire's finest print companies, boasting an array of litho, digital and large format printing. In an industry where quality is imperative, we pride ourselves on ensuring our customers’ needs are met or exceeded every time they order. We are constantly evolving our services and welcome people from every walk of life to join us.Working Hours :Standard hours are Monday to Friday, 9am - 5pm. 1-day will be an off-the-job training day working from home (day to be arrange with manager).Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Team working,Initiative....Read more...
