Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc.....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Position: Service Advisor
Location: Aylesbury
Salary: £26,000 - £30,000 per annum
About Us:
My client is a leading main dealership in Aylesbury who are seeking an experienced and enthusiastic Service Advisor to join their service department.
Key Responsibilities:
Welcome customers warmly and assess their service needs with professionalism and courtesy.
Schedule service appointments efficiently, managing workload effectively to ensure customer satisfaction.
Consult with customers to understand their vehicle's requirements, providing accurate estimates and advice.
Liaise between customers and service technicians, ensuring clear communication and timely updates.
Maintain accurate records of service transactions and customer interactions for reference and compliance.
Requirements:
Previous experience in a service advisor role within the automotive industry is desirable.
Exceptional communication and interpersonal skills, with a customer-focused approach.
Strong organizational abilities, with meticulous attention to detail.
Proficiency in computer systems and software, including dealership management tools.
Ability to thrive in a fast-paced environment, managing multiple tasks with ease.
Positive attitude, team player mentality, and a passion for delivering outstanding customer service.
Benefits:
Competitive salary with the potential for performance-based incentives.
Ongoing training and development opportunities to support your career growth.
Employee discounts on vehicle purchases, servicing, and parts.
Collaborative and supportive work environment, fostering diversity and teamwork.
Opportunity to work with leading automotive brands and cutting-edge technology.
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy.....Read more...
Technician required to work in a high tech environment maintaining and servicing equipment on a daily basis. You will have experience working with varied voltages, so you are able to confidently check equipment voltage to ensure functionality with certainty.
Key skills
Understanding of vacuum systems.
Experience of engineering disciplines.
Electrical or electronic fault finding.
Single and three phase power supply
RF understanding.
High voltage AC/DC and pulsed understanding.
Responsibilities
Installing and servicing equipment.
Diagnosing faults and completing repairs.
Monitoring processes and energy performance.
Adjusting controls to ensure equipment is operating at optimum efficiency.....Read more...
Master Technician Aylesbury Main Dealership £38,000
We are working with a Main dealership in the area who are looking for an experienced Master Technician to join their busy Service Department.
- Basic salary £38,000 with an OTE of £50K+ with team bonus and overtime
- Annual leave 20 days a year, plus 3 extra days for Christmas closure
- Private healthcare
- Pension scheme
Key Master Technician Roles and Responsibilities:
- As Master Technician you will undertake maintenance, service, and repair activities on motor vehicles to the highest standard
- Effectively record details of diagnosis, work completed, and components utilised in line with group and manufacturer standards
- To be aware of the importance and implication of maintaining high levels of customer satisfaction and work to ensure they are always met
Minimum Master Technician Requirements:
- Diagnostic / Master Technician level (however we are also looking for a Service Technician / MOT Tester)
- Have at least 2 years experience after a qualifying period, of working in a Dealership as a Master Technician/Mechanic (or similar)
- Must have a Driving License
- Take responsibility for the quality and quantity of their work
Master Technician Aylesbury Main Dealership £38,000
Job Type:- Permanent
Hours:- Full Time
Job Tile:- Master Technician....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment....Read more...
Cleanroom Technician required to join an existing technical team as part of the internal Electrical Engineering Division with multiple Cleanrooms.
You will be responsible for helping maintain equipment and report problems with the operation of the cleanrooms, from contributing to lab waste management, user requests, restocking, sample management and general housekeeping and safety in the cleanrooms.
The ideal candidate will be educated to GCSE level 4 / NVQ level 2 or equivalent with Mathematics, English and a science subject or have an equivalent level of practical experience.
As you will be joining an existing team, it is essential that you are a team player with good communication, interpersonal and organisational skills. IT literacy is a bonus, the ideal candidate will have previous experience in a Cleanroom or laboratory environment with health and safety knowledge of hazardous materials, electricity, machinery, pressurised systems and the safe use of chemicals.....Read more...
The core responsibility of this position is to contribute to the production of a wide range of products and fluidic components for the aerospace industry. Specifically, the role focusses on supporting routine business operations related to the assembly, integration, and testing of space-certified products, including non-return valves, flow control valves, solenoid valves, cold gas thrusters, and upcoming development projects. Prior experience as a Mechanical Fitter or demonstrable practical engineering skills, preferably acquired through an apprenticeship or within an engineering-related organisation.
Primary Duties
Perform precise assembly and testing tasks.
Conduct integrity assessments of assembled systems using high-pressure gases and specialised leak detection equipment, such as helium mass spectrometers.
Prepare components for assembly and testing by employing automated particle counting equipment or patch sample counting techniques.
Utilise digital voltmeters, oscilloscopes, data acquisition systems, and high-voltage dielectric and insulation resistance test equipment.
Engage in material joining processes, including manual TIG (Tungsten Inert Gas) welding and orbital welding, while maintaining weld inspection records for parts and test pieces.
Perform periodic maintenance of cleanroom facilities and testing equipment.....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
There is an opening with one of our clients who is in need of 360 Operators to start on their new project as soon as possible. Their site is based in Aylesbury.
Immediate start.
Skills and Requirements:
Valid CPCS card (blue ideally)
EUSR (National grid substation)
4-5 years experience as a 360 Operator
At least 2 years construction experience in the UK
Own PPE
2 working references required
If you are interested, please contact Tom on 0752 369 7448 or by calling the office on 0203 008 5212 for more information.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and we believe that inclusivity begins with the candidate experience. All qualified applicants will receive consideration for employment regardless of, gender, race, age, sexual orientation, religion, or belief.....Read more...
Trainee Field Service EngineerAylesbury£25,000 - £30,000 + Overtime (£45,000 OTE!) + Training + Career Progression + Company Van + Lunch Allowance + Tools + Pension + Holiday + IMMEDIATE START!Are you looking for a position as a Trainee Field Service Engineer in a company that pushes their employees to be the best they can be through offering them training and career progression? If so, this role is perfect for you. Work for a growing company that will allow you to take full control of your career! This company operates within the water treatment industry and is looking to bring in a trainee field service engineer to join the company and take advantage of long term progression prospects. Become a skilled engineer whilst taking advantage of training and overtime! As A Trainee Field Service Engineer You Will: * Travel around the country as a service engineer. * Planned and routine maintenance. * Act as a face of the company for customers. * Undergo initial training.
As A Trainee Field Service Engineer You Must: * Electrical experience or knowledge is ideal. * Full UK Drivers License. * Willingness to travel across the country. * Willing to do overtime.
Please apply or call Joe Pavett on 07458 163045 for immediate consideration!Keywords: trainee, trainee engineer, trainee field engineer, service engineer, field service engineer, field engineer, field service, mobile engineer, mobile technician, field electrician, electrical, nvq, 18th edition, waste water, water treatment, city & guilds, electrical engineer, oxford, luton, swindon, reading, aylesbury, st albans This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc.....Read more...
We are looking for an experienced Ground Support Equipment (GSE) Test Technician. As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site.Key Responsibilities:Conduct hot fire testing of apogee engines.Instrument engines and maintain firing site.Support lead Test Engineers for site preparation and maintenance.Handle propellant sampling, analysis, and testing.Maintain and operate mechanical and steam vacuum systems.Calibrate instrumentation and conduct steam boiler maintenance.Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities.Requirements:Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field.Previous experience in GSE testing and chemical analysis of propellants.Proficiency in writing reports and test procedures.Familiarity with hot fire testing, propellant handling, and pressure systems checks.Experience with aerospace clean rooms and fuelling operations.Ability to interpret Piping and Instrumentation Diagrams (P&IDs).Strong understanding of high-pressure gas and fluidic systems.....Read more...
Technician required to work in a high tech environment maintaining and servicing equipment on a daily basis. You will have experience working with varied voltages, so you are able to confidently check equipment voltage to ensure functionality with certainty.
Key skills
Understanding of vacuum systems.
Experience of engineering disciplines.
Electrical or electronic fault finding.
Single and three phase power supply
RF understanding.
High voltage AC/DC and pulsed understanding.
Responsibilities
Installing and servicing equipment.
Diagnosing faults and completing repairs.
Monitoring processes and energy performance.
Adjusting controls to ensure equipment is operating at optimum efficiency.....Read more...
Hot-Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
Electronic Instrumentation Engineer required to use their industrial engineering skills in PLCs, electrical motor drives, inverters, robots and automation systems to performance test propulsion systems.
The ideal candidate will have experience building, testing and modifying electronic modules including power, control and data acquisition devices. Control room and firing bay knowledge highly desirable but not essential.
Key skills:
Electrical Engineering
Electro-mechanical
Power Systems or Power Electronics
Energy Storage Systems
Electrical Design
Schematics
Matlab
Simulink
AutoCAD
FineELEC (4M)
NEPLAN
Electrical Troubleshooting
Electrical Testing
On-board Diagnostics (OBD-II)
PSpice....Read more...
Parts Manager - Main Dealership - Aylesbury - £37,500 basic
The Parts Manager role comes with a competitive salary of up to £37,500 plus bonus with fantastic company benefits.
- Enhanced holidays that increase with service
- Eligibility to join one of our car scheme
- Critical illness cover after 2 years and Life Assurance
- Enhanced paid maternity, paternity and adoption leave
- For some roles a company car and additional earning potential through commission or bonus
Key Responsibilities as a Parts Manager:
- You will be responsible for the management of the Parts department
- Maintaining and operating an efficient and profitable parts operation
- Motivate and develop the Parts Department ensuring excellent customer service is delivered to customers by phone, online, and face to face
- Work with other Heads of Departments to develop business strategy
- Source additional parts from outside the Dealership using the appropriate search methods
Skills and Experience required for this Parts Manager role:
- Strong background within the Parts Department as Parts Manager having managed a team in a previous role
- The ideal Parts Manager must have excellent interpersonal and communication skills together with a friendly and approachable manner
- You will be computer literate and obtain a full clean driving licence
- Experience with Pinnacle would be an advantage however not essential as full training will be given
Parts Manager - Main Dealership - Aylesbury - £37,500 basic
Job Title - Parts Manager
Job Type - Full time....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes. The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety....Read more...
I'm on the lookout for a talented CAD Designer to join a dynamic team that supports the worldwide motor racing sport industry. If you thrive on crafting intricate designs for precision fabricated, welded, machined, and insulated components, I want to hear from you!
KEY TASKS
As a CAD Designer Produce product designs, manufacturing methodologies, costings, and documents
Work closely with the technical team to understand the customer requirements/needs to find solutions utilising standard/existing products where possible.
Manage technical and sales projects as a CAD Designer
Will be required to quote parts during busy times or holiday in the technical department
To create and maintain records within the Company’s engineering policies in the ERP system
Required to manipulate customer CAD files for quoting
Ideally will have some experience with surfacing for press tool creation etc
Create engineering drawings for use both internally and externally
SKILLS REQUIRED
Personable with a high degree of self-motivation, capable of communicating (written and oral) and influencing at all levels, in any environment
Strong problem-solving skills, motivated with the ability to work as part of a team and own initiative (keen to get hands-on).
Able to organise yourself and your workload effectively. Be able to balance short-term projects alongside longer-term objectives.
A flexible “can-do” approach that is adaptable and open to change
Must be able to work alone or as a group
A high skill level of SolidWorks is Desirable
understanding of manufacturing processes and methods would be Ideal but not essential
The ability to increase efficiency and performance through well designed products and processes
Aim to streamline future designs – perhaps look at a more generic way to jig parts with machined bases etc.
Ability to attend customer meetings to discuss their requirements and our capabilities
DESIRED EXPERIENCE
2+ years in a Mechanical Design Engineer Role
Project Management
2 years SolidWorks experience
Benefits:
Company pension
Free on-site parking
Health & wellbeing programme
Sick pay
....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the....Read more...
We are looking for an experienced Ground Support Equipment (GSE) Test Technician. As a GSE Test Technician, you will be responsible for various tasks including hot fire testing of apogee engines, instrumentation of engines, and maintaining and upgrading the firing site.
Key Responsibilities:
Conduct hot fire testing of apogee engines.
Instrument engines and maintain firing site.
Support lead Test Engineers for site preparation and maintenance.
Handle propellant sampling, analysis, and testing.
Maintain and operate mechanical and steam vacuum systems.
Calibrate instrumentation and conduct steam boiler maintenance.
Work with and handle flight hardware, including preparation of customer flight engines for test, instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities.
Requirements:
Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field.
Previous experience in GSE testing and chemical analysis of propellants.
Proficiency in writing reports and test procedures.
Familiarity with hot fire testing, propellant handling, and pressure systems checks.
Experience with aerospace clean rooms and fuelling operations.
Ability to interpret Piping and Instrumentation Diagrams (P&IDs).
Strong understanding of high-pressure gas and fluidic systems.....Read more...
My client specialises in the defence industry, produces and maintains various types of weapons and materials. They are also involved in creating composite materials such as carbon fibre tubes and aero-structures.
Primary Responsibilities:
You will be responsible for supporting Aerospace Propulsion programs.
Conduct assembly and component analysis (structural, ballistic, thermal) to support design
Support bid and proposal preparation including: scope of work, technical volume, schedules, and budgets
Support creation of detailed IRAD plans and support continuous improvement projects
Participate in Change Review Board meetings by preparing and presenting TDP process changes
Participate in Phase Gate Review meets for development programs
Required Experience & Skills:
BS/MS in Mechanical Engineering, Aerospace Engineering, Chemical Engineering, Physics, or similar technical field
Seeking 5-12 years of engineering experience, Aerospace or Defence industry experience preferred
Knowledge of closed form and finite element analysis
Knowledge of solid modelling and detail drawing creation
Candidates will be put forward for Security Clearance (SC) once the job has been accepted.....Read more...
Vehicle Technician - Aylesbury
If youre a Level 3 qualified Vehicle Technician, with experience in car servicing, maintenance and diagnostics, we would love to speak to you!
Job Role: Vehicle Technician
Location: Aylesbury
Money: £35,000 - £40,000 plus bonus
Hours: 8:00am-5:30pm Monday Friday with Saturdays on rota
Benefits: Electric Vehicle (EV) Training levels 1- 4 for specific roles
Requirements for this Vehicle Technician role are:
- Qualified to IMI/NVQ level 3 Light Vehicle Maintenance and Repair/ City and Guilds Level 3 Motor Vehicle Maintenance / Level 2 Light Vehicle Maintenance and Repair / Level 2 Light Vehicle Maintenance and Repair / City & Guilds Automotive
- Have experience working within a car dealership or an independent garage/ car supermarket
- Completed your MOT tester course class 1, 2, 4 or 7
- Experience of working on commercial vehicles/ LCV / cars
- Ideally Hybrid / EV trained but if not training will be provided
Job Type - Permanent
Hours - Full time
Job Title - Vehicle Technician/ Car Mechanic / Vehicle Mechanic
If you are interested in this Vehicle Technician/ Car Mechanic role, please apply today!....Read more...
Are you a Welder Fabricator and interested in the Motor sports industry in the Buckinghamshire / Aylesbury area.
Join a dynamic team, a leading motor sport manufacturing company based in Buckinghamshire! I'm seeking a skilled Welder Fabricator to contribute to the creation of high-performance racing components.
Key Tasks
As a Welder Fabricator you will ensure strict adherence to health and safety guidelines at all times.
To cut, assemble and fabricate/weld, for the most part in jigs, metallic assemblies.
To be responsible for quality and timely completion of parts to agreed standards, based upon the information in the drawings, works orders and job information packs.
Liaise with the supervisors ensuring they have a full understanding of requirements of each job.
To be responsible for ensuring the timekeeping/job tracking system is always kept up to date.
Experience
Working with thin wall material including Stainless Steel, Inconel, and Aluminium.
He/she will have significant fabrication experience, ideally, but not necessarily in the motor sport sector.
Also be able to take the initiative and enjoy the responsibility of working on their own.
Strict attention to detail
Ability to work to tight deadlines, completing tasks in an often-demanding working environment.
Familiarity of working from technical drawings is essential.
Working hours - Monday to Friday 07:00 - 16:30
Salary - £25,000 - £33,000 depending on experience
Benefits
25 Days Holiday in addition to Statutory Bank Holidays.
Paid overtime.
Work wear provided.
Free on-site parking.
Pension.
Cycle scheme.
....Read more...