A Service Engineer paying £36,000, Overtime paid at 1.5, Van, Fuel Card, Laptop, Mobile phone, private medical insurance, full training is given. 8am - 5pm,(Monday to Thursday early finish on a Friday). A large ‘blue chip’ Multinational company are recruiting for a Service to work ‘on site’ one of their customers manufacturing facilities. The functions of the role would be to inspect, repair, provide preventative maintenance to compressors, blowers and pumping systems upon vehicles – full training given. Location of the service Engineer position: Aylesbury A van is provided for the role as occasional breakdowns would need to be attended to. We would be very keen to speak to people that have experience working in the following roles: HGV Fitter, Plant Fitter, Hydraulic fitter, Vehicle technicians, Aircraft Engineers, Mechanical fitter, Compressor engineer, HGV Technicians. Water treatment and pump backgrounds. Main of the Service Engineer role:
Provide an after-sales product support
Repair equipment and vehicles at depot or on-site as required to ensure conformance with manufacturer’s specification and company policy
Complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard.
Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to staff as required
Accurately complete all relevant paperwork including reports, inspections, calibrations checks and job sheets.
Complete any mechanical maintenance, testing and repair of hydraulic and pneumatic systems, pumps, compressors, motors and ancillary equipment, be able to read schematic drawings.
We would be very keen to speak to people who have experience with:
Diagnostic analysis, repairs or preventative maintenance
Knowledge of hydraulics and pneumatics
Providing breakdown assistance both at the depot and off-site at vehicle location.
Other responsibilities include but are not limited to: onboard vehicle smart system maintenance, vessel integrity, light body repairs, and general vehicle repair.
Benefits of the Service Engineer position: £36,000Overtime paid at 1.5. Van Laptop Mobile phone private medical insurance, full training given Alternatively, if you want a private chat about the service Engineer position before submitting your application then please call or email RODGER MORLEY at E3 Recruitment. ....Read more...
Field Sales Manager – Power Supplies / Inverters
Are you an experienced Field Sales Manager with a strong background in AC/DC power supplies, LED drivers, converters, battery chargers, or inverters? If so, our client would love to hear from you!
This is an exciting opportunity to join one of the UK’s leading businesses in the power supply and LED driver industry. They are looking to recruit a Field-Based Account Manager to help drive growth and further strengthen their sales function across the UK.
We are seeking a candidate with proven experience in switch-mode power supplies, including DIN Rail, open frame, enclosed, modular, and external formats. Knowledge of LED drivers, DC/DC converters, battery chargers, and inverters is essential.
In this role, you will be instrumental in managing key accounts while actively identifying and developing new business opportunities. You will work closely with OEMs and manufacturers across the UK, helping to expand and solidify long-term partnerships.
The ideal candidate will have:
Extensive experience in a field-based sales role focused on power supplies, LED drivers, converters, inverters, or battery chargers
A valid UK driving licence
Experience working directly with OEMs and engineering teams
A strong track record in both business development and key account management
Location: This Field Sales Manager role is based out of Buckinghamshire, with travel across the UK as required.
To apply, please send your CV to NDrain@redlinegroup.Com or call 07487 756328 for more information.....Read more...
The primary responsibility of the role is to support the Hot Fire Test teams across all engine test cells. This involves site maintenance, upkeep, and preparation activities before and after hot fire testing, as well as set-down activities post-test.
Key Responsibilities
Perform site maintenance and assist in site set-up and take-down activities related to testing.
Maintain and manage Ground Support Equipment (GSE), ensuring it meets operational requirements.
Test and verify broadband seismic instruments, including surface and borehole setups.
Engage with database management for equipment tracking and test documentation.
Handle and operate vacuum and pressure systems as needed.
Conduct tests on electrical motors and oversee the function testing of all engines.
Prepare and produce detailed test procedures for use by the test team during operations.
Requirements
Experience working in the space industry, with a strong understanding of relevant technologies and standards.
Proficiency in database management for tracking and documentation purposes.
Familiarity with vacuum and pressure systems.
Hands-on experience in testing electrical motors and conducting function tests on engines.
Demonstrated ability to prepare comprehensive test procedures.....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
The Test Engineer will join a Systems Engineering team critical in space thruster engine development. You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components. This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop. Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc. Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource.....Read more...
Cleanroom Production Technician required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes. The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Seeking a skilled Senior Test Engineer with expertise in space propulsion. Responsible for overseeing firing site operations, including site preparation, maintenance, fuel and oxidizer handling, pressure systems.
Key Responsibilities
Design and manufacture of liquid propellant and high-pressure gas feed systems.
Advanced training provision in key operational skills on firing sites.
Proficient analysis and assessment of test data, producing high-quality analysis material.
Adherence to COMAH controlled testing standards.
Minimum Requirements:
Mechanical fitter or practical engineering skills
Ideally qualified to OU or equivalent graduate level course in engineering.
Level 4 training on the Skills and Competency Matrix with in-depth experience.
....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
Mechanical Fitter required to join a precision aerospace production team to work in a cleanroom environment on the assembly, integration and testing of aerospace devices.
Our international Aerospace and Defence client is going through a continued period of expansion and looking for Precision Mechanical Assembly Technicians. The ideal candidate will have experience as a Mechanical fitter experience ideally through apprenticeship with exposure to and of the following: non return valves, flow control valves, solenoid valves, cold gas thrusters or any fluidic components for the space industry.
Training and skills development will be provided, extended working hours may be required to meet production targets.
Responsibilities
Precision assembly and test activities in a Class 8 clean room.
Testing the integrity of assembled systems using high pressure gases and leak detection equipment such as helium mass spectrometers.
Cleaning components in preparation for assembly and test activities using automatic particle counting equipment and patch sample counting techniques.
Electrical testing
Gas flow testing of valves, thrusters and fluidic components to ensure components are within
tolerance prior to assembly.
Digital voltmeters, oscilloscopes, data acquisition systems, high voltage dielectric and insulation
resistance test equipment.
Material joining processes including manual TIG (Tungsten Inert Gas) welding, orbital welding, and compiling weld inspection reports on parts and test pieces.....Read more...
Retail Stock Replenishment Assistant
*Access to wages from 3 days*Immediate Start*Holiday Pay*
£13.73 per hour inclusive of holiday pay (£12.25 per hour + £1.48 = £13.73 p/h holiday pay)
Location: AYLESBURY
Do you have an interest in Retail?
Are you looking for a role where you will be involved in high profile projects for some of the UK’s leading grocery supermarkets. We have Retail Stock Replenishment Assistant opportunities that offer flexible working patterns and a job where each day and week is different.
The Role
We are looking for a number of Retail Stock Replenishment Assistant's to add to our already successful team.
Work will be carried out in a variety of retail stores, travel will vary on a shift-by-shift basis. Having your own vehicle would be advantageous.
You will be working as part of a team led by a Team Manager or Store Management. You will need to work at a fast pace and to a high standard our clients expect.
Duties will include the following:
De-merchandising and remerchandising to planograms, cleaning the fixture where required.
Reprofiling the fixture where necessary to ensure each product is shoppable for the customer.
Transporting stock from the warehouse onto the shop floor.
Supporting the store where necessary with replenishment.
Shifts are between 10-12 hours, days and nights (most shifts are nights). Access to the work available will be on your smartphone, via our Field Power platform where you can set your availability and accept shifts.
You will be required to clock in and out using your smart phone via our RAS Dashboard.
Travelling maybe involved when local work is not available. Accommodation will be provided when required to stay away from home.
Key Skills/ Experience Required
An eye for detail.
General level of fitness as manual handling and lifting will be involved.
Hard working and ability to work under pressure.
Previous experience in retail, although training will be provided.
Problem solving and a 'can do' attitude.
Due to the nature of our work, you must be able to work unsociable hours, including early mornings and during the night when required. As a result, we can only accept applicants 18 years of age and over.
Benefits
Colleagues will be offered a benefit called Wagestream, which enables colleagues to track, save and access up to 50% of their wages prior to pay day. Wagestream also offers financial advice, all contributing to the financial wellbeing of RAS colleagues.
Uniform provided.
Accommodation where required.
Holiday pay.
Pension scheme.
Progression opportunities.
Recognition, awards and incentives.
RAS (Retail Asset Solutions) is the largest nationwide retail support company providing Merchandising, Stock taking and Supply chain audit services. Your future career development is in your hands!
If you think you are suitable for this position and you want to find out more, please apply today!
Multiple positions available!!!!
This role is being handled by Retail & Asset Solutions (RAS). To discuss this vacancy or any other great positions we have please call us on 01689 879444 for a confidential chat about working for our business.
By applying to this role, you are consenting to Retail & Asset Solutions to hold and process your data in compliance with the General Data Protection Regulations. If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data then please contact us at applications@retailassetsolutions.com and we will respond to your query as soon as possible.....Read more...
Retail Team Driver (driver with own vehicle)
Salary: £30,516.20
Location: AYLESBURY
Retail & Asset Solutions are currently looking for Retail Merchandising Team Driver’s in your area. You must hold a full Driving License.
The Company
We are a leading provider of Retail Stocktaking, Merchandising and Supply Chain Management Services. With over 3500 employees throughout the UK, we provide a hardworking and rewarding workplace with many progression opportunities.
The Role
We are looking for Retail Merchandising Team Driver’s (driver with own vehicle) to add to our already successful merchandising team.
This role will require you to carry out the merchandising role as well as oversee the transportation of a small team of merchandisers to and from each shift.
A typical week consists of 4-5 shifts Sunday to Thursday
Shift lengths are generally 12 hours, days and nights (predominately nights). Access to available assignments will be on your smartphone via our Field Power platform where you can set your availability and accept shifts.
You will be required to clock in and out using your smart phone via our RAS Dashboard.
Work will be carried out on different retail customer sites / stores and travel will vary on a shift-by-shift basis.
Escalating any issues with the vehicle in a timely and efficient manner
You will work as part of a team led by a Team Manager or Store Management
You will be required to carry out the following:
Removing and replacing stock with the use of client plans and systems
Adjusting shelf heights
Moving stock from the warehouse onto the shop floor, with use of roll cages and pallet trucks.
Stock replenishment.
Key Skills/ Experience Required
This role will involve working unsociable hours including night shifts, this therefore means we are unable to hire anyone under the age of 21 years.
This role requires you to have a Full Driving License.
You must have a ‘can do’ attitude and be able to work long shifts where required.
Previous experience in retail desirable, although training will be provided.
Driver Benefits include:
Uniform provided.
Accommodation where required.
Progression opportunities.
Holiday entitlement.
Pension scheme.
Progression opportunities.
Recognition, awards and incentives.
If you think you are suitable for this position and you want to find out more, please apply today!
This role is being handled by Retail & Asset Solutions (RAS). To discuss this vacancy or any other great positions we have please call us on 01689 879444 for a confidential chat about working for our business.
By applying to this role, you are consenting to Retail & Asset Solutions to hold and process your data in compliance with the General Data Protection Regulations. If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data then please contact us at applications@retailassetsolutions.com and we will respond to your query as soon as possible.
....Read more...
Team Manager
Salary: £33,027.17 total package - (£30,627.17 per annum + £200 per month car allowance)
Location: AYLESBURY
Do you have an interest in Retail?
Are you looking for a role where you will be involved in high profile projects for some of the UK’s leading grocery supermarket’s & DIY chains. We have salaried Team Manager opportunities where you will be working on New Stores, Refits, Range Reviews and Store Support Projects. You will be able to work at a fast pace, making quick decisions leading teams merchandising stock to an excellent standard.
The Role
A typical week consists of 48hrs Sunday to Thursday.
You will be leading and supporting a team of merchandisers and replenishers carrying out tasks required by the client.
Communicate with management on progress and end of project sign off.
Carry out health and safety inductions and checks.
Shift lengths are generally 12 hours, days and nights (predominately nights). Access to available assignments will be on your smartphone via our Field Power platform where you can set your availability and accept shifts.
You will be required to clock in and out using your smart phone via our RAS Dashboard.
Work will be carried out on different retail customer sites / stores and travel will vary on a shift-by-shift basis.
You will be required to carry out the following:
Removing and replacing stock with the use of client plans and systems.
Adjusting shelf heights.
Moving stock from the warehouse onto the shop floor, with use of roll cages and pallet trucks.
Stock replenishment.
Travelling will be involved when local work is not available. Accommodation will be provided when required to stay away.
Desirable Qualities:
Excellent communication skills.
Able to make decisions and prioritise.
Previous experience in Merchandising, Retail Supervision or managing people.
Methodical approach and keen attention to detail.
Manual handling and heavy lifting will be involved.
Problem solving and a ‘can do’ attitude.
Due to the nature of our work, you must be able to work unsociable hours, including early mornings and during the night when required. As a result, we can only accept applicants 18 years and over.
Benefits include:
Car allowance.
Holiday entitlement.
Pension scheme.
Uniform provided.
Accommodation when required.
Progression opportunities.
Recognition, awards and incentives.
RAS (Retail Asset Solutions) is the largest nationwide retail support company providing Merchandising, Stock taking and Supply chain audit services. Your future career development is in your hands!
This role is being handled by Retail & Asset Solutions (RAS). To discuss this vacancy or any other great positions we have please call us on 01689 879444 for a confidential chat about working for our business.
By applying to this role, you are consenting to Retail & Asset Solutions to hold and process your data in compliance with the General Data Protection Regulations. If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data then please contact us at applications@retailassetsolutions.com and we will respond to your query as soon as possible.
....Read more...
We are looking for a Welding Production Technician with strong TIG welding skills to join an aerospace cleanroom production team.
Responsibilities:
Manual TIG welding of precision aerospace components.
Preparing welds, inspections, and reports to aerospace standards.
Assembly and testing of valves, thrusters, and fluidic components.
Leak testing with helium mass spectrometers and high-pressure gases.
Electrical and gas flow testing to ensure performance and tolerance.
Experience with aerospace components (valves, thrusters, fluidics) is desirable. ....Read more...
Injection Mould Toolmaker Location: Aylesbury, UK Salary: Up to £44,000 per annum (Negotiable, dependant on experience) Benefits:23 days holiday plus statutory holidays.Government Nest pension scheme.Free onsite parking.Dust coats and safety glasses provided.Complimentary tea and coffee. Company Overview Our client, a reputable manufacturer in high-precision plastic injection moulding, is seeking an experienced Injection Mould Toolmaker. This well-established company provides high-quality solutions for industries such as medical, automotive, and connectors, using advanced equipment in a modern, climate-controlled environment. Reason for Vacancy: This role is open due to the retirement of a long-standing team member, providing a unique opportunity to join an experienced team and make a lasting impact. Team Size: The company comprises a close-knit team of 18, with 11 skilled individuals in the Toolroom. Position Summary: The successful candidate will be responsible for the design, manufacture, and maintenance of single and multi-cavity precision injection mould tools. This role involves both CNC and manual machining, utilising high-specification equipment including J&S Grinders with Optidress, Deckel manual mills, laser welders, laser engravers, and injection mould machines. Key Responsibilities:Manufacture and maintain precision injection mould tools, including single and multi-cavity tools.Operate both CNC and manual machinery, including Mikron HSM800 and Duro with Heidenhain controls.Perform EDM machining, both wire (Charmilles ROBOFIL) and spark (SODICK EDM), utilising VISI PEPS software.Program CNC equipment (offline programming experience is advantageous).Conduct routine maintenance and repairs to ensure moulds meet stringent quality standards.Collaborate with the design and production teams, using VISI CADCAM software for design tasks.Adhere to ISO 9001:2008 standards in all processes and maintain rigorous quality control. Qualifications and Experience:Previous experience as an Injection Mould Toolmaker in a precision engineering environment.Competency in both CNC and manual machining techniques.Knowledge of online CNC programming; offline programming is advantageous.Familiarity with Heidenhain controls and 3-axis Mikron HSM800 and Duro machinery.Experience with VISI CADCAM software.Expertise in both wire and spark EDM machining, particularly with SODICK and Charmilles equipment.Strong attention to detail and effective problem-solving skills. Working Hours:40hrs per weekFlexibility to complete core hours between 6.30am and 6.30pm. Compensation:Hourly rate up to £21, depending on experience and skill level. Application Process: If you are interested in this role, you are encouraged to submit you CV outlining relevant experience and qualifications. Shortlisted applicants will be contacted to discuss the opportunity and suitability to be sent, only with your permission to do so first.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel.....Read more...
Senior Accountant – SME Clients | £40,000–£60,000 DOE | Aylesbury | Office-Based Make a real impact with growing businesses. This ambitious, mid-tier accountancy practice has been on a strong growth path for the past five years—and they’re just getting started. Now, they’re looking for an experienced Senior Accountant to join their Aylesbury team and play a key role in supporting a wide range of SME clients. If you’re confident managing client relationships, passionate about delivering high-quality advice, and ready to step into a role that blends technical expertise with meaningful impact—this could be your next move. Why This Role Stands OutDiverse client portfolio – work closely with ambitious SME owners across multiple sectorsClear progression – a pathway to Manager level and beyond, with structured supportSupportive environment – collaborate with experienced professionals who value growth and qualityHigh visibility – your input matters, both to clients and internallyHands-on leadership – approachable Directors invested in your successWhat You’ll Be DoingPreparing statutory accounts with accuracy and complianceManaging client relationships as a trusted adviser, offering tailored financial insightReviewing work, mentoring juniors, and supporting their developmentProducing management accounts to help clients make better business decisionsProviding tax advice to individuals and corporates with a practical, solutions-first approachContributing to clients’ long-term financial strategiesWhat They’re Looking ForACA or ACCA qualified, with at least 4 years in practiceStrong technical knowledge across accounts, tax, and advisoryConfident communicator who builds lasting client relationshipsOrganised and methodical, able to manage multiple prioritiesCommercially aware and proactive—you spot risks and opportunities earlyThe OfferSalary: £40,000 – £60,000 DOELocation: Aylesbury (office-based)Career development: Ongoing training, exposure to varied industries, and a clear growth pathEnvironment: A close-knit, collaborative team with a mentoring culture....Read more...
CNC Turner Location: Aylesbury, Buckinghamshire Salary: Up to £38,500 per annum (dependant on experience) with an OTE of up to £60k Benefits25 days holiday (plus bank holidays)Company Pension Scheme (up to 5% contribution)Life AssuranceOvertime available – paid at x1.5 after 39 hoursOnsite parkingModern, well-equipped working environmentFamily-run business with very low staff turnoverTraining and development opportunities to expand skills into other areas of machining and engineering Company Profile This long-established precision engineering business is family-owned and has built a reputation for delivering high-quality machining solutions. With continued investment in modern CNC machinery and a clear focus on growth, the company is now looking to expand its team. Staff enjoy a relaxed yet busy working environment where self-management is encouraged, supported by a structured framework that ensures quality and consistency. With low turnover and strong investment in modern / state-of-the-art machine tools and people, the company provides long-term stability and opportunities to grow. Job Profile As a CNC Turner, you will be responsible for programming, setting, and operating CNC lathes to produce precision components to tight tolerances. Working on both small batch runs and bespoke parts, you will use your CNC machining expertise to deliver high-quality results in a toolroom and production environment. Experience with either Siemens or Fanuc controls is essential, and familiarity with both will be a distinct advantage. DutiesProgramming, setting, and operating CNC turning lathesProducing precision components from engineering drawingsWorking to tight tolerances in line with quality standardsCarrying out small batch and bespoke machining runsEnsuring machining processes are efficient and accurateMaintaining a safe, clean, and well-organised work area Skills & AttributesProven CNC Turner / CNC Machinist experience (essential)Ability to program, set, and operate CNC lathesExperience with Siemens and/or Fanuc controls (both preferred)Strong background in precision machining / toolroom workAbility to read and work from technical drawingsAttention to detail and commitment to qualityFlexible and proactive attitude towards machining challenges Hours of Work39 hours per weekMonday to Thursday: 7:30am – 4:30pmFriday: 7:30am – 3:30pm£17.00 – £19.00 per hour (dependant on experience)Overtime available (15hrs per week potential) - paid at 1.5x after 39 hours Interested? If you’re a skilled CNC Turner looking for a stable, long-term role with a family-run business that values its people, we’d love to hear from you. Apply today to take the next step in your machining career.Bolt-On Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel.....Read more...
Bookkeeper | £28,000–£35,000 DOE | Aylesbury Join a genuinely down-to-earth bookkeeping firm where balance, stability, and trust matter as much as numbers do. You’ll work closely with the Owner and wider team, supporting a loyal portfolio of SME clients with day-to-day bookkeeping and tax duties. This is a hands-on role suited to someone who enjoys client interaction, steady responsibility, and a friendly, flexible environment.Why Apply?Job security – a long-term, stable role in a growing and reputable local firmClient-facing involvement – build relationships and become a trusted contactFlexible responsibility – take on more as you grow, or stay steady if that suits youSupportive team – the Partner ensures no one is overburdenedLocal impact – work with small and growing businesses you’ll get to know personallyWhat You’ll Be DoingDay-to-day bookkeeping and reconciliations to trial balancePreparing and submitting VAT returnsSupporting with tax return preparationResponding to client queries and providing helpful guidanceLiaising with HMRC when requiredInformally supporting junior team members and apprenticesWhat They’re Looking ForAt least 3 years in a similar bookkeeping or accounts roleStrong communication and client service skillsConfident using Sage (essential)Comfortable with bookkeeping, VAT, and tax basicsWilling to be part of a small, collaborative teamThe OfferSalary: £28,000–£35,000 depending on experienceLocation: AylesburyProgression: Flexibility to grow into more responsibility over time....Read more...
The primary responsibility of the role is to support the Hot Fire Test teams across all engine test cells. This involves site maintenance, upkeep, and preparation activities before and after hot fire testing, as well as set-down activities post-test.
Key Responsibilities
Perform site maintenance and assist in site set-up and take-down activities related to testing.
Maintain and manage Ground Support Equipment (GSE), ensuring it meets operational requirements.
Test and verify broadband seismic instruments, including surface and borehole setups.
Engage with database management for equipment tracking and test documentation.
Handle and operate vacuum and pressure systems as needed.
Conduct tests on electrical motors and oversee the function testing of all engines.
Prepare and produce detailed test procedures for use by the test team during operations.
Requirements
Experience working in the space industry, with a strong understanding of relevant technologies and standards.
Proficiency in database management for tracking and documentation purposes.
Familiarity with vacuum and pressure systems.
Hands-on experience in testing electrical motors and conducting function tests on engines.
Demonstrated ability to prepare comprehensive test procedures.....Read more...
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician. In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities. Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
