Redline has an extraordinary opportunity for multiple a Contract Vacuum Instrumentation Engineer based in Oxfordshire, with a specialist scientific company who are at the forefront of groundbreaking scientific experiments.
This contract will not accept candidates operating via a PSC, therefore you will be required to work via an Umbrella company.
This is a great opportunity to work with technology that you will not find anywhere else in the UK. The company is currently undertaking the biggest project in their history, worth around £500 million and they need you to come on board and help them make it a success.
You will be responsible for inspection, testing, commissioning of the state of the art vacuum systems which are part of a bigger machine.
Key skills required for the Contract Vacuum Instrumentation Engineer based in Oxfordshire:
- Practical experience and ability with vacuum or general physics instrumentation and electronics, interfacing, debugging and fault-finding.
- Experience with Physics of ultra-high vacuum or accelerator vacuum systems.
- Experience with Industrial or accelerator control systems
- Practical experience and ability with commissioning, operation and troubleshooting of control instrumentation.
For more information or to apply for the Contract Vacuum Instrumentation Engineer opportunity based in Oxfordshire, please contact Jack Kelly – jkelly@redlinegroup.Com / 01582 878812 quoting reference JWK1069.....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Space thruster Test Technician required to support Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test. Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc. ....Read more...
Electrical, Control & Instrumentation Technician
Salary: £46,800 Location: Wakefield Contract Type: Permanent Role: EC&I Technician
EC&I Technician role available! We are looking for someone to join a successful Chemical Manufacturing company. The Electrical Controls & Instrumentation Technician is responsible for installing, maintaining, troubleshooting, and optimizing electrical, control, and instrumentation systems used in chemical manufacturing operations. This company is heavily investing into their site and staff, and it is a great opportunity for those looking for a change of environment and great culture. This company has a direct presence across four continents’ and meets customers’ needs worldwide.
Benefits:
Death in service benefit – 3x annual salary
Critical illness cover
25 days holiday bank holidays
Matched pension contribution scheme up to a total employer contribution of 10%
Qualifications & Skills Required for the EC&I Technician Position:
Level 3 Electrical engineering qualification or apprenticeship.
BS7671 Wiring Regulations training.
Understanding of the Electricity at Work Regulations.
Experience maintaining EC&I systems in an industrial environment.
Ability to interpret electrical and instrumentation drawings.
Good communication skills; data-driven approach.
Responsibilities of the EC&I Technician:
Perform planned preventative maintenance on electrical, control, and instrumentation systems.
Diagnose faults and repair plant equipment efficiently to minimise downtime.
Maintain and improve electrical distribution systems
Support upkeep of SCADA, DCS, PLC, and hard‑wired control systems.
Conduct functional testing of process controls, safety systems, and critical alarms.
Carry out routine calibrations of instrumentation.
Maintain accurate maintenance records within the CMMS system.
Work in compliance with the Health & Safety at Work Act, COMAH requirements, and site-specific SHE policies.
Safely isolate equipment following LOTOTO procedures.
Complete risk assessments for routine and non‑routine tasks.
Please apply directly for further information regarding this EC&I Technician role.....Read more...
Mechanical Engineer – Cancer Instrumentation – Cambridge
A growing division within an established Medical Devices organisation in South Cambridge is currently seeking an experienced Medical Devices Mechanical Engineer to contribute to their ongoing development of cutting-edge cancer instrumentation, aimed at improving patient recovery rates.
This company is expanding its team dedicated to Medical Devices Instrumentation, primarily focusing on Cancer Instrumentation. Ideally, they are looking for candidates with prior experience in Medical Devices Instrumentation. However, they are open to considering candidates who have worked on other types of Medical Devices, provided they were developed to ISO 13485 standards.
The company offers state-of-the-art labs and workshops to facilitate your success in developing these life-saving technologies. You will also receive ongoing training and development to ensure you stay at the forefront of technological advancements.
In addition to relevant experience, it is expected that you hold a relevant degree in mechanical engineering or a related field that has prepared you for a career within the Medical Devices sector.
As mentioned, you will be working on life-saving technologies, benefiting from continued career and skills development, and rewarded with an excellent starting salary, pension, life assurance, bonuses, healthcare, dental coverage, and other benefits typically associated with large multinational organisations.
Due to the anticipated high level of interest in this role, we recommend that if you are interested, you submit your application promptly and specify the types of Medical Devices you have experience working on.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
Electronics Engineer – Cancer Instrumentation – Cambridge
A growing Medical Devices Division is currently seeking an Electronics Engineer to contribute to the development of new Cancer Instrumentation devices, based in South Cambridge.
You will work on a wide range of electronics design tasks, including, but not limited to, power electronics, digital/analogue electronics, RF, and other complex fields such as thermal, motion control, and electro-mechanical or electro-medical devices. While it is not expected that you have experience in all these areas, having expertise in as many as possible would be advantageous.
Specifically, you will need experience working within the Medical Devices sector adhering to ISO 13485 or EN 60601 standards. You will focus on Cancer Instrumentation devices designed to improve the survival rates of cancer patients. However, experience in other Medical Devices or Scientific Instrumentation will also be considered.
The company boasts state-of-the-art labs and workshops specially designed to support your success. They also provide on-site gym facilities, nearby running and cycling tracks for your fitness needs, and wellness programs to assist you as needed.
It is expected that you hold a degree in electronics or a related field that has prepared you for an electronics engineer role within the Medical Devices sector.
In addition to the challenging work and exceptional facilities, you will receive a competitive starting salary, bonuses, pension benefits, healthcare coverage, dental benefits, and other perks typically associated with blue-chip companies.
If you are interested in working on life-saving technologies, we recommend applying now to avoid missing out on this excellent opportunity.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.....Read more...
We have an exciting, long-term opportunity for an experienced Contract Commissioning Technician to join our customer based in Yorkshire.
This role offers an OUTSIDE IR35 determination, meaning we can accept candidates who would like to operate through their own PSC.
Our customer is a well-respected provider of technical machinery, designed and developed in the UK and sold globally. They serve various industries, including FMCG, chemical, and automation. Due to a prestigious project win, they are looking for skilled contractors to support their project teams.
As a Commissioning Engineer, you will play a crucial role in supporting the implementation of mechanical and instrumentation equipment, ensuring installations are completed to the highest standards and in compliance with project specifications.
Key Responsibilities- Contract Commissioning Technician - Yorkshire
-Oversee and execute both dry and wet commissioning activities.
-Collaborate with a team to ensure mechanical and instrumentation systems are installed and operating as per the design specifications.
-Ensure compliance with project specifications and regulatory requirements during commissioning.
-Troubleshoot, resolve technical issues, and ensure smooth integration of equipment across the project.
-Liaise with project stakeholders, including contractors and suppliers, to ensure all systems are compatible.
-Have proven experience in mechanical commissioning within a similar industry (FMCG, chemical, or automation).
-Be able to demonstrate a strong understanding of instrumentation systems and commissioning processes.
For more information or to apply for this Contract Commissioning Technician position in Yorkshire, please contact Kieran Pratt at Kpratt@redlinegroup.Com or call 01582 878832, quoting reference KDP1052....Read more...
You’ll begin your journey at college, building the engineering principles and technical understanding that will set you up for success. You’ll focus on the fundamentals behind electrical systems, control systems and instrumentation, looking at the technology that monitors, protects and controls how gas moves across our network. After completing this initial learning phase, you’ll return to the site to put your knowledge into practice, developing real hands‑on experience with our expert technicians
By the end of the programme, you’ll know how to fix, test and look after the control and monitoring systems that keep our gas sites running safely. You’ll learn how to use different types of instrumentation, like pressure, flow and temperature sensors and understand how they help us check what’s happening across the network to make sure everything is working as it should
Training:Engineering Maintenance Technician - Dual Discipline - Level 3.
During the first ten months of your apprenticeship, you’ll spend Monday to Friday based full‑time at HETA College in either Grimsby or Hull, living and learning alongside apprentices from across the country. Training Outcome:By the end of the programme, you’ll know how to fix, test and look after the control and monitoring systems that keep our gas sites running safely. You’ll learn how to use different types of instrumentation, like pressure, flow and temperature sensors and understand how they help us check what’s happening across the network to make sure everything is working as it should.Employer Description:National Gas Transmission is the backbone of Britain’s energy system today and will play a leading role in the transition to a clean energy future that works for every home and business. We own and operate the national gas network, delivering energy to where it is needed in every part of the country.Working Hours :Monday to Friday 9am to 5pm.Skills: Problem solving skills,Team working,Willing to learn,Proactive,Curious....Read more...
Mechanical Design Engineer – Genomics Instrumentation – Cambridge
A growing biotechnology company, based in Cambridge, is currently looking for an experienced Mechanical Design Engineer to support the development of cutting-edge genomics instrumentation.
You will be working within a multidisciplinary team of engineering experts, including physicists, electronics engineers, software developers, and life sciences specialists. You’ll be a key member of the team, contributing to the design and development of innovative devices that enable high-throughput genomic workflows and precision diagnostics.
We’re looking for someone with experience in product design and development, ideally within medical devices, diagnostics, or scientific instrumentation. A background in mechanical engineering is essential, and experience working in regulated environments (ISO 13485, FDA QSR) would be highly beneficial.
The ideal candidate will have a few years of industry experience and be looking to take the next step in their career. You’ll be involved in the full product lifecycle—from concept development and prototyping through to design for manufacture and product launch.
You’ll be rewarded with a competitive salary, regular salary reviews, bonus scheme, pension, life assurance, and other excellent benefits you’d expect from a growing, forward-thinking organisation.
This is a fantastic opportunity to join a company that invests in its people and is making a real impact in the field of genomics. Due to expected interest, I recommend applying now to avoid missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices and Scientific recruitment at Newton Colmore Consulting, on +44 121 268 2240, or make an application and one of our team will be in touch.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.....Read more...
The Redline Group are working in collaboration with a leading designer in specialised instrumentation to secure the services of a Contract FPGA Design Engineer – VHDL to work on-site at their offices near Staines. Commutable from Windsor, Leatherhead and the surrounding areas, this is an initial 3-month opportunity where you will assist in the re-design of key electronics.
Our client has been designing cutting-edge equipment used in a range of industries for many years, focusing on technology which not only provides safety, but will allow analysis and monitoring. You will join a small design team who have been tasked with a re-design project, creating a secure and robust product which will be in use for years to come.
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
Key Skills Required – Contract FPGA Design Engineer, Staines:
- Proven experience of FPGA development, in particular the Xilinx Spartan family
- Strong experience of using VHDL
- Experience within a scientific/instrumentation/regulated background is not essential but useful.
For more information or to apply for the Contract FPGA Design Engineer opportunity in Staines, please contact Jack Kelly – Jkelly@redlinegroup.Com // 01582 878812 quoting reference JWK1073....Read more...
Exciting opportunity to work as an EC&I Engineer for a multi-billion-pound market-leading company, offering a competitive salary of up to £44,900 plus an attractive benefits package, including annual bonus, enhanced pension, private medical insurance, life assurance, cycle scheme, and more. Progression is a genuine opportunity with this company given their ambitious but stable growth and ongoing investment strategy.As the EC&I Engineer you will be responsible for supporting reliability and plant integrity across an Upper Tier COMAH site. You will play a key role in ensuring compliance with related regulations, while focusing on continuous improvement, fault finding, and maintaining safe and efficient operations.Responsibilities
Ensure compliance with safety standards for all systems, supporting plant integrity through inspections, preventative maintenance, and best practice.
Support RCA failures, driving corrective and preventative actions, assisting with breakdown response, and helping to deliver sustainable solutions.
Support site reliability by identifying and implementing improvement opportunities aligned with maintenance and engineering strategy.
Assist in managing spares and supply chain to minimise downtime risk and ensure critical equipment availability.
Support small-scale CAPEX projects, planning, and coordination with contractors and internal stakeholders.
Utilise SAP to analyse maintenance data, track asset performance, and contribute to long-term maintenance and reliability planning.
Requirements
Hold a HNC/HND or Degree in Electrical, EC&I, Controls and Instrumentation, or a related subject (essential).
Possess a solid understanding of control systems, instrumentation, and electrical systems.
Have experience with SAP and familiarity with reliability tools such as RCA or FMEA (advantageous).
Please apply directly for this EC&I Engineer role or contact Sean Turner for further details regarding this opportunity.....Read more...
An innovative and sustainably focused fuel storage company with a global presence are looking for a skilled and experienced C&I Engineer to join their team in the South East region!
They are passionate about people and ensuring that the development of their employees is at the heart of everything that they do. They are focused on moving towards a more sustainable future within their global operations. Now is a great time to join their team as a C&I Engineer.
Salary and Benefits of the C&I Engineer
Annual Salary between £60,000 - £70,000
Annual Bonus Up to 10%
Company Vehicle or Car Allowance
Flexible Working Opportunities
Pension Up to 9% Employer Contribution
38 Days Annual Leave (Inc. Bank Holidays)
Private Medical Insurance
Healthcare Cash Plan
Life Assurance Policy 5 x Annual Salary
Key Information on the C&I Engineer Role
With the role of C&I Engineer, you will travel the region of the South East in a field-based role to deliver key projects within the Oil & gas field, providing expertise knowledge and experience as a C&I Engineer.
You will be responsible for managing and maintaining all aspects of instrumentation and industrial Automation Control Systems. Including system upgrades, design, development and installation. The C&I Engineer will also provide technical support to the Maintenance, Operations and Project Teams.
Key Responsibilities
Field equipment and instrumentation selection/approval
Install and commission new elements to improve current C&I equipment and systems in line with project requirement
Maintain and improve existing SCADA systems to ensure performance improvement and efficiencies to operation
Understand process control issues and develop control solutions, working collaboratively with designers and operations
DCS/SCADA/PLC support and fault finding
Routine systems maintenance & support - backup, DR planning and testing, systems prognostic (system log analyses) and diagn
Analysing data and presenting findings in written reports
Review Software and Hardware designs (BPCS, DCS, SIS, PLC and SCADA) Preparation of handover work packs, commissioning procedures and on-site commissioning
Participate in C&I documentation reviews, P&ID reviews, HAZOPs and LOPAs, FATs and SAT
Essential Criteria needed of the C&I Engineer
Extremely strong technical knowledge in Controls and Instrumentation Engineering
Over 5 years of experience working in an industry-based role
Vast experience within the Oil & Gas industry under UK Regulations
Degree Qualified in a related or relevant field
Experience of working in High Hazard areas (COMAH, ATEX, DSEAR etc.)
Strong working knowledge of PLC and SCADA Systems
How to apply?
Apply for this position direct by submitting your CV for review.
....Read more...
Hot Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
Hot Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development.....Read more...
Working under the guidance of experienced technicians and engineers, you will develop practical skills across electrical systems, PLCs, instrumentation, and control equipment while adhering to safety, quality, and regulatory standards.
The role involves assisting with inspections, calibrations, commissioning activities, and routine maintenance tasks, as well as learning to interpret electrical drawings, loop diagrams, and control schematics. You will actively contribute to site activities, participate in training and college-based learning, and demonstrate a strong commitment to safety, continuous improvement, and professional development.
You will:
Instrumentation tasks
Calibrating:
Temperature sensors on boilers
Pressure transmitters on steam lines
Flow meters (fuel, air, water)
Checking emissions monitoring equipment
Electrical tasks
Motor checks (conveyors moving biomass fuel)
Testing control panels and MCCs (Motor Control Centres)
Fault finding on pumps, fans, and feeders
Planned maintenance
Replacing faulty instrumentsLoop checks (signal testing from sensor to control room)
Breakdown support
Biomass plants are mechanical-heavy → lots of reactive work
Control system exposure
Observing PLC/SCADA systems (sometimes assisting senior techs)
Training Outcome:Upon successful completion of the apprenticeship there is the opportunity of a permanent position in the following areas:
EC&I Technician
Control Systems Engineer
Power Generation Specialist
Employer Description:In renewables, exciting technologies such as electrolysis, carbon capture, and energy storage are placing new demands on facility design, operation and maintenance.
At BWSC, backed by a wealth of engineering talent and more than 40 years of energy facility experience, we work with customers in Europe and beyond to tackle energy storage, carbon capture, Power-to-X and related energy transition challenges.
Through plant- and grid-related consulting, engineering, project contracting, operation and maintenance services, we help our customers clarify their ambitions, design and arrange their facilities optimally, operate and maintain them cost-effectively, and meet project timelines and budgets.Working Hours :Monday to Friday
Shifts to be confirmed.Skills: Communication skills,Team working,Willing to Learn,Strong Work Ethic,Co-operative....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the ....Read more...
Senior Project Manager
Location: Guildford Area, Surrey, Hybrid working (2 days remote)
Salary: Up to £65,000 + Bonus + Employee Ownership Benefits
Redline Group is partnering with a world-leading engineering organisation specialising in the design and delivery of technical projects within the clean energy & gas sector. Due to continued growth, they are seeking a Senior Project Manager to join their team. This is a pivotal role leading high-value, multi-disciplinary engineering projects across process, mechanical, electrical, and instrumentation disciplines. You will take full ownership of projects from order through detailed design, procurement, installation, commissioning, and final handover ensuring delivery on time, within budget, and to the highest safety and quality standards. The role requires the ability to manage multiple complex projects simultaneously while maintaining strong client relationships worldwide.
This position requires someone from an engineering background who combines strong leadership capability with solid technical grounding. You will lead and inspire Project Managers and Project Engineers while remaining close to the engineering detail, including equipment specification, procurement oversight, and engagement with process documentation such as P&IDs. Experience within the industrial gases sector or closely related process industries is highly advantageous.
Key Responsibilities:
Lead and develop multi-disciplinary project teams
Manage full lifecycle project delivery from design through commissioning
Oversee technical proposals, quotations, and vendor approvals
Build and maintain strong relationships with customers, contractors, and suppliers globally
Ensure compliance with ISO9001, health & safety, and statutory requirements
Act as focal point for client support contracts and spare parts management
Champion innovation, continuous improvement, and operational excellence
About You:
Proven experience managing large, complex engineering projects
Strong leadership and stakeholder management skills
Technical expertise in process, mechanical, electrical, or instrumentation engineering
Track record of delivering projects safely, on time, and within budget
Commercial awareness and commitment to quality and customer satisfaction
Why Apply?
Employee Ownership Trust structure with annual profit share bonus scheme
Opportunity to work on technically challenging, international projects
Collaborative culture with significant industry expertise
To apply for this Senior Project Manager role, please send your CV to Yuon Skelton: yskelton@redlinegroup.Com or call 01582 878 829....Read more...
To learn and develop the technical capabilities to achieve a level 3 apprenticeship in a multi-skilled engineering maintenance discipline. Developing skills and capability to become a controls and instrumentation technician withing the Automation department.
https://www.mundipharma.com/
Undertake a programme of training required to carry out planned and reactive maintenance of production control systems in accordance with company procedures and industry best practice, to maintain performance and compliance whilst minimising production downtime.
Develop the capability to ensure all maintenance work carried out is correctly documented and recorded in accordance with company procedures to comply with regulatory requirements.
Develop the capability to diagnose and repair equipment that is not functioning correctly. The ability to understand complex information and read engineering drawings is essential.
Understand the Health and Safety and Quality requirements required for performing maintenance tasks and always apply these working practices.
Complete the training requirements of the apprenticeship. Provide documented evidence of training completion for review by the Engineering team leader and external educational bodies.
Training:
The learner will be studying the Engineering Maintenance Technician - Single discipline Level 3 Apprenticeship Standard qualification.
Day release to West Suffolk College.
Training Outcome:This role is a permanent position. After completing your 48-month apprenticeship at Mundipharma, you will become the Controls and Instrumentation Technician within the OT and Automation team.Employer Description:Join us and make a difference when it matters most At Mundipharma, we are proud of the work we do. We challenge ourselves constantly to deliver more for patients, healthcare professionals, our partners, and our employees. We are an international pharmaceutical and consumer healthcare company. We are headquartered in Cambridge UK, with a presence across Africa, Asia Pacific, Canada, Europe, Latin America and the Middle East. Mundipharma is dedicated to bringing innovative treatments to patients in the areas of Pain & Supportive Care, Infectious Disease and Consumer Healthcare as well as other severe and debilitating diseases. We live by our guiding principles: integrity, patient-centricity, globalfirst mindset, pace and agility, and high performance. As part of our commitment to continuous improvement, we encourage everyone to bring passion, energy, and dedication to their work. We care about our work as a company where everyone is valued and believe that everyone should have the opportunity to develop.Working Hours :Monday-Friday (08:30-16:30)Skills: Communication skills,IT skills,Analytical skills,Initiative,Team working....Read more...
Obtain prices, support pre-qualification, handle and amend POs, process confirmations, update deliveries, expedite orders, assist supplier sourcing, and communicate clearly with suppliers, buyers and project teams to keep procurement running smoothly.Training Outcome:There are many options available to progress within the team.Employer Description:With a focus on operational technology and digital transformation, Capula has been a leader in advanced system integration for decades; optimising efficiency & delivering performance on a massive scale. We work in some of the most highly regulated and challenging industrial environments. In control, instrumentation and automation we connect, streamline and enhance your systems, using advanced integration to meet ever increasing performance demands.Working Hours :Monday - Friday, times to be confirmed.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Logical,Initiative....Read more...
CAD modelling and preparation of manufacturing drawings
Supporting machine shop operations
Laboratory testing and report preparation
Assisting with production and maintenance activities
Training:Training will be at University of Chichester
Bognor Regis Campus
1.5 days a week
Training Outcome:Continuation of employment and advancement within the company.Employer Description:Arun Microelectronics Ltd (AML) is a leading global manufacturer of in-vacuum motion systems, vacuum compatible stepper motors, ion gauges and instrumentation for scientific and R&D applications.Working Hours :Monday to Friday, 09:00 to 17:00.
Two-week company shutdown over Christmas.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Creative,Initiative,Focused,Reliable,Proactive....Read more...
Electrical, Control & Instrumentation Engineer
Salary: £60,000 - £65,000 Location: Wakefield Contract Type: Permanent Role: EC&I Engineer
EC&I Engineer role available! We are looking for someone to join a successful Chemical Manufacturing company and to provide hands-on engineering skill combined with technical expertise, project involvement, and site-wide maintenance leadership. This company is heavily investing into their site and staff, and it is a great opportunity for those looking for a change of environment and great culture. This company has a direct presence across four continents’ and meets customers’ needs worldwide.
Benefits:
Death in service benefit – 3x annual salary
Critical illness cover
25 days holiday bank holidays
Matched pension contribution scheme up to a total employer contribution of 10%
Qualifications & Skills Required for the EC&I Engineer Position:
C&G 18th Edition
C&G Electrical Installation
DSEAR / COMPEX
Excellent planning, organisational and problem-solving skills.
Able to lead contractors and internal teams effectively.
Knowledge of UK legislation and safe systems of work (HSWA, CDM, DSEAR).
Confident with risk assessments, method statements and permit-to-work processes.
Strong communication, stakeholder management and decision-making capability.
Responsibilities of the EC&I Engineer:
Own the EC&I maintenance strategy across the site including proactive and reactive maintenance.
Lead LOTOTO and electrical isolations, acting as the Responsible Person for electrical works. (415V 3-phase, 110V & 240V electrical equipment)
Lead calibration, loop checking and verification across all instrumentation.
Functional Safety, Life Cycle ownership.
Develop and maintain DCS systems in collaboration with Automation and IT teams.
Accept and verify EC&I design throughout all project phases-front end, detailed design, FAT/SAT, commissioning.
Ensure correct documentation and asset data is captured for the site's CMMS.
Act as EC&I technical lead on all new projects onsite.
Liaise with contractors, suppliers and internal stakeholders to ensure safe, timely and cost-controlled delivery.
Provide regular progress reporting to senior management. · Participating in HAZOPs, design reviews, and contributing to safety case development.
Identify risks, delays or slippage and implement corrective actions.
Support UK HSE COMAH interventions/inspections acting as the EC&I SME.
Suggest monthly improvements in safety and performance as part of the site's continuous improvement culture
Please apply directly for further information regarding this EC&I Engineer role.
....Read more...
An exciting opportunity has arisen for a Senior Embedded Software Engineer based in East Sussex to join this global leader in cutting edge electronic instrumentation.
Joining their multidisciplined R&D team at their global centre of excellence, as a Senior Embedded Software Engineer you will develop and support software for significant projects aligned to business critical needs. You will be involved in all stages of the software development lifecycle from requirements capturing to release validation and approval.
Experience required for Senior Embedded Software Engineer based in East Sussex:
Previous experience within embedded software development
Proven experience of Embedded C / C++
Full software development lifecycle experience
Knowledge of FREERTOS would be ideal
The role offers hybrid working. No sponsorship available for this position.
This is a great chance to join a world leading organisation who can offer the opportunity for career progression and personal development.....Read more...
An exciting opportunity has arisen for a Lead Embedded Software Engineer based in East Sussex to join this global leader in cutting edge electronic instrumentation.
Joining their multidisciplined R&D team at their global centre of excellence, as a Lead Embedded Software Engineer you will develop and support software for significant projects aligned to business critical needs. You will be involved in all stages of the software development lifecycle from requirements capturing to release validation and approval.
Experience required for Lead Embedded Software Engineer based in East Sussex:
Previous experience within embedded software development
Proven experience of Embedded C / C++
Full software development lifecycle experience
Knowledge of FREERTOS would be ideal
The role offers hybrid working. No sponsorship available for this position.
This is a great chance to join a world leading organisation who can offer the opportunity for career progression and personal development.....Read more...
· Development of PC software in C#, WPF, Win UI3, both for internal tooling and external use.
· Embedded software development in C primarily on STM32 microcontrollers
· Scripting in Python and JavascriptTraining:The training will take place at University of Chichester
Bognor Regis Campus
One day a week
Training Outcome:Continuation of employment and advancement within the company.Employer Description:Arun Microelectronics Ltd (AML) is a leading global manufacturer of in-vacuum motion systems, vacuum compatible stepper motors, ion gauges and instrumentation for scientific and R&D applications.Working Hours :Monday to Friday, 9:00 to 17:00
Two week company shutdown over Christmas.Skills: Communication skills,Attention to detail,Organisation skills,Problem solving skills,Analytical skills,Logical,Team working,Creative,Proactive,Reliable....Read more...
