Senior Embedded Software Engineer – C & STM32
Redline has been retained by a global leader in critical power and power generation solutions who are seeking a Senior Embedded Software Engineer to join their expanding R&D team, based on site in Burton upon Trent.
Due to continued growth and increasing demand, our Burton Upon Trent based client is looking for a Senior Embedded Software Engineer to design, develop, test, implement and integrate control software for advanced power systems.
Responsibilities for this Senior Embedded Software Engineer – C & STM32 role are:
Design software architecture and interfaces for embedded controllers, including STM32 microcontrollers and FreeRTOS.
Develop, test and integrate control firmware and applications in embedded C/C++, adhering to MISRA C:2012, IEC 61508 and CERT C standards.
Implement communication protocols such as Modbus/TCP, serial communications (RS232/422/485) and Ethernet.
Integrate embedded systems with analogue sensors and actuators using ADCs and DACs.
Key skills and experience for this Senior Embedded Software Engineer – C & STM32 job are:
Degree in Software Engineering, Computer Engineering, Electrical or Control Engineering, or equivalent industry experience.
Proven experience developing embedded or industrial control software.
Strong proficiency in C/C++ for ARM Cortex-M microcontrollers (STM32 preferred).
Solid working knowledge of FreeRTOS or a similar RTOS, including task scheduling, inter-task communication, priority management and real-time debugging.
Familiarity with MISRA C:2012, IEC 61508 functional safety concepts and CERT C secure coding practices.
This is an excellent opportunity to join a forward-thinking organisation offering strong career progression and the chance to work for a global leader in critical power solutions.
To apply for this Senior Embedded Software Engineer – C & STM32 (on-site) position in Burton Upon Trent, please send your CV to ndrain@redlinegroup.Com.....Read more...
Mechanical Maintenance Engineer
Location: Desford Shift Pattern: 4 on 4 off (Days & Nights) Salary: £55,000 + Up to £3,000 Annual Bonus Pension: 15% Total (10% Employer / 5% Employee)
Overview
We are recruiting for a Mechanical Maintenance Engineer to join a large, well‑established engineering team at a brand‑new, highly automated manufacturing site in Desford. This is an exciting opportunity to join one of the fastest‑producing facilities in Europe, operating within a dusty but cutting‑edge environment filled with modern automated machinery.
The Role
As a Mechanical Maintenance Engineer, you will be responsible for maintaining and improving a wide range of production equipment. Your key responsibilities include:
Key Duties
Mechanical fault finding and repair across fast‑paced production machinery
Conducting planned preventative maintenance (PPM)
Responding to breakdowns and reducing engineering downtime
Working on conveyors, mixers, ovens, and kilns
Supporting the wider engineering team within a highly automated environment
Ensuring all engineering activities are carried out safely and efficiently
Working Hours / Overtime Structure
4 on 4 off, rotating days and nights
296 banked hours annually, reducing to 206 hours after daily handover (5:30–6:00)
206 hours is equivalent to 18 days of overtime per year
Overtime during holiday cover on weekends is paid at time and a half
Any other overtime is also paid at time and a half
About You – Essential Criteria
Must be mechanically qualified (NVQ Level 3 or above)
Experience within FMCG or heavy industrial environments
Strong mechanical fault-finding skills
Ability to work effectively in a dusty, high-output manufacturing site
Industries Considered
FMCG
Heavy Industrial / Process
Automated manufacturing environments
Environment & Machinery
Dusty environment with state‑of‑the‑art automation
Working on equipment such as:
Conveyors
Mixers
Ovens
Kilns
Team Structure
You will join a large engineering team of around 20 engineers, offering strong peer support, cross‑training and excellent knowledge sharing.
Benefits
£55,000 salary + up to £3,000 bonus
15% pension (10% employer contribution)
Overtime paid at time and a half
Opportunity to work at one of the fastest‑producing manufacturing sites in Europe
Career development and progression opportunities
Why Is This Role Available?
Position has become available due to an engineer leaving the business.
Interview Process
Stage 1: Informal technical conversation with Carl, focused on experience and CV details.
Stage 2: On‑site interview with an engineer. Candidates must bring overalls and safety shoes and may complete a basic practical assessment, including panel work and a site walk around.
....Read more...
Mobile Chiller Engineer – FM Service Provider – London & M25 – Up to £60,000 per annum + Package CBW Staffing Solutions is currently recruiting for a Mobile Chiller Engineer to join a specialist Air Conditioning & Refrigeration company based in South East London/Kent. This is an excellent opportunity to work across a varied portfolio of commercial sites, including universities, hospitals, and office buildings throughout London and the South East. The successful candidate will be a fully qualified Chiller Engineer (NVQ Level 2/3 in Refrigeration & Air Conditioning, F-Gas Category 1, City & Guilds 2079 or equivalent) with a strong background in the installation, maintenance, and repair of commercial and industrial chiller systems. You will be responsible for delivering both planned preventative and reactive maintenance while ensuring optimal system performance and client satisfaction. In return, the company is offering a competitive salary of up to £60,000, excellent overtime opportunities, ongoing training, and clear career progression. Hours of Work: Monday to Friday08:00 am – 17:00 pm Key Duties & Responsibilities:Carry out planned preventative maintenance (PPM) on a range of chiller systems, including air-cooled, water-cooled, absorption, and adiabatic unitsDiagnose and repair mechanical, electrical, and refrigeration faults across components such as compressors, condensers, evaporators, pumps, and control systemsPerform F-Gas leak detection, recovery, and refrigerant recharging in line with regulationsIdentify system improvements and advise clients on efficiency upgrades and best practicesLiaise directly with clients, providing clear technical feedback and maintaining strong working relationshipsComplete service reports, timesheets, and documentation accurately using mobile devicesEnsure compliance with all health & safety procedures, risk assessments, and method statementsParticipate in an on-call rota (currently 1 in 14 weeks) for emergency breakdownsProvide technical support and guidance to junior engineers where requiredPackage:Salary: Up to £60,000 per annum25 days holiday + bank holidaysCompany van & fuel cardTravel time: 1 hour each wayTablet and work phone providedFull company uniformPlenty of overtime availableTraining and development opportunitiesRequirements:NVQ Level 2/3 in Refrigeration & Air Conditioning or equivalentCity & Guilds 2079 / F-Gas Category 1 (Essential)Proven experience working on commercial and industrial chiller systemsStrong understanding of refrigeration cycles, HVAC systems, and electrical controlsAbility to read and interpret technical drawings and wiring diagramsFull UK Driving Licence (Essential)Strong problem-solving skills and a customer-focused approachPlease send your CV to Bailey White at CBW Staffing Solutions for more information and to avoid missing out on this opportunity!....Read more...
Electrical Maintenance Engineer Location: Hoveringham
Shift: 3 shift patterns (Monday to Friday only)
Salary: £45k +Overtime
Benefits: – Up to 15% total pension (10% employer / 5% employee) – 25 days annual leave +Bank Holidays. Industry: Leading UK Manufacturer of Building Products
Our client is a well-established UK manufacturer of essential building products, operating across 17 sites nationwide. They deliver high-quality solutions that support both traditional and modern construction methods, driving the continued growth of the UK construction industry.
Role Overview
We are looking for a proactive Electrical Maintenance Engineer to join a busy, heavy industrial FMCG site. This is a hands-on role where you’ll maintain and repair electrical and mechanical systems to keep production running smoothly, often working with older machinery and equipment.
Key Responsibilities
Diagnose and repair electrical and mechanical faults.
Respond quickly to breakdowns to minimize downtime.
Work on older plant and equipment, including pumps, hydraulics, gearboxes, valves, and generators.
Perform PLC diagnostics and fault-finding.
Support planned preventative maintenance and continuous improvement initiatives.
What We’re Looking For
Strong multi-skilled electrical and mechanical experience.
NVQ Level 3 or equivalent in Electrical Engineering; time-served apprenticeship preferred.
17th/18th Edition electrical qualification.
Experience in heavy industry or FMCG environments.
Confident with PLC fault-finding (any brand).
Excellent communication and teamwork skills.
Desirable Skills:
Experience with older plant and machinery.
Knowledge of industrial hydraulics, gearboxes, and valves.
Proactive approach to continuous improvement.
Benefits
Premium overtime rates.
15% employer pension contribution.
25 days holiday + Bank Holidays.
Ongoing training and development.
Private healthcare.
Company sick pay scheme.
Permanent role with a leading UK FMCG manufacturer.
If you’re ready for an exciting opportunity with a respected industry leader, apply today or get in touch!
....Read more...
Assist in the planned and reactive maintenance of gas CHP units across customer sites.
Shadow experienced engineers to learn diagnostic and fault-finding techniques.
Support the installation, commissioning, and decommissioning of CHP systems.
Record service data accurately using company reporting tools and software.
Maintain tools, equipment, and company vehicle in good condition (if applicable).
Attend all required training courses (on-the-job and classroom-based).
Build a working knowledge of CHP system components including engines, generators, controls, and gas systems.
Develop customer-facing professionalism while working on live sites.
Always adhere to health and safety protocols.
Training Outcome:
Qualified CHP Service Engineer
Commissioning Engineer
Project Engineer
Employer Description:Established in 1995 in Heek, North Rhine-Westphalia, Germany. 2G is a leading international manufacturer of combined heat and power (CHP) systems for decentralized energy production. Our systems range from 20 to 4,500 kW and are utilized across various sectors, including agriculture, municipalities, housing, commercial enterprises, industrial operations, and the energy sector.In the UK, 2G Energy Ltd. provides tailored energy solutions, supporting clients from initial consultation through to operation and maintenance of CHP systemsWorking Hours :Monday - Friday, 8.00am - 5.00pm, 60 min break.
Overtime optional.Skills: Communication skills,IT skills,Attention to detail,Organisation skills,Customer care skills,Problem solving skills,Number skills,Analytical skills,Logical,Team working,Initiative,Physical fitness....Read more...
MON to FRI role, generous, competitive package; as a Lubrication Technician, you will be joining a leading industrial manufacturer that supplies high-quality products to the construction and engineering sectors. This is an excellent opportunity for someone looking to develop within reliability and maintenance. Location: Peterborough; easily accessible from Stamford, Huntingdon, March, Spalding, Bourne, Wisbech, Grantham, Oundle, Ely, Northampton, Whittlesey, Yaxley, Bedford, Corby, Kettering What’s in it for you as a Lubrication Technician • £30,000 – £35,000 salary • Permanent role • Monday to Friday; shift pattern 8am to 4pm • KPI Bonus • 31 days’ holiday increasing with service; 1 per year to 36 days holiday (including bank holidays) • Overtime available • Company pension • Training in lubrication best practices and reliability techniques • Ongoing development and career progression within engineering and maintenance Main Responsibilities of the Lubrication Technician • Carrying out routine lubrication of plant machinery including motors, bearings, gearboxes, pumps and conveyors in line with maintenance schedules • Monitoring lubricant levels, condition and contamination to ensure optimal equipment performance • Conducting inspections to identify wear, overheating or potential mechanical issues • Collecting oil samples and supporting condition monitoring and predictive maintenance programmes • Maintaining accurate lubrication records and reporting any abnormalities to the engineering team • Supporting the wider maintenance team during planned shutdowns and maintenance activities • Ensuring all work is completed in line with site health & safety procedures and best practice lubrication standards Requirements for the Lubrication Technician • Previous experience working in a maintenance, lubrication or mechanical technician role within a manufacturing or industrial environment • Basic knowledge of lubricants, oils, greases and lubrication systems • Experience working with industrial equipment such as pumps, conveyors, gearboxes and motors • Strong awareness of Health & Safety and safe working practices • Good attention to detail with the ability to identify early signs of equipment wear or failure • Mechanical or engineering qualification such as NVQ Level 2–3, City & Guilds or equivalent (desirable) To apply for the Lubrication Technician role, we would love to receive CVs from candidates who have worked as Lubrication Technicians, Lubricant Engineer, Maintenance Technicians, Mechanical Technicians, Maintenance Fitters, Plant Technicians, or Reliability Technicians within an industrial or manufacturing environment. Please click the link and apply for the Lubrication Technician role.....Read more...
Location: West Midlands (Field Based)
Salary: Competitive Base Salary + Uncapped Commission (Excellent OTE)
Benefits: Company Car, Health Insurance, Pension, Expenses, Full IT Package, Ongoing Training & Career Development
About the Company
Our client is one of the most progressive and successful equipment dealerships in the UK, specialising in the sales and support of construction, industrial, access, and recycling machinery.
Due to continued growth within the Industrial division, an exciting opportunity has arisen for a high-calibre, motivated Area Sales Manager to join the team covering the West Midlands territory.
This role is ideal for a commercially driven sales professional who thrives in a fast-paced environment and enjoys building long-term customer relationships across multiple industrial sectors.
The Role
The primary purpose of this role is to promote and sell a leading range of industrial equipment, with a strong focus on Teletrucks, access equipment, and generators.
This is a customer-facing consultative sales role, working closely with businesses across sectors including:
- Logistics
- Warehousing
- Manufacturing
- Distribution
- Recycling
You will identify customer needs, recommend tailored solutions, and work collaboratively with internal teams to deliver an exceptional customer experience.
Key Responsibilities
- Develop strong relationships with new and existing customers
- Understand customer operations and recommend appropriate equipment solutions
- Prepare detailed quotations including machinery, attachments, finance, service contracts and insurance options
- Carry out equipment appraisals on used machinery
- Conduct on-site machine demonstrations and installations
- Manage the full sales cycle from lead generation through to order completion
- Maintain accurate sales forecasts and CRM records
- Monitor customer account status and support payment collection where required
- Work collaboratively with internal departments to ensure smooth delivery and customer satisfaction
- Achieve and exceed sales targets and profitability objectives
- Ensure all administrative and reporting requirements are completed accurately and on time
- Maintain compliance with company policies, procedures, and health & safety standards
Skills & Experience Required Essential
- Proven B2B sales experience within one of the following sectors (Industrial equipment, Material Handling, Access Platforms, Power Generation, Construction Equipment)
- Strong consultative / solution-based sales approach
- Excellent negotiation and closing skills
- Ability to plan, manage and forecast sales activity
- Strong commercial awareness and problem-solving ability
- Confident communicator with strong relationship-building skills
- Full UK driving licence
Desirable
- Experience with material handling or forklift equipment
- Forklift truck driving licence
Personal Attributes
- Self-motivated with a strong can-do attitude
- Professional and customer-focused
- Able to work independently while contributing to team success
- Strong organisational and multitasking abilities
- Reliable, trustworthy and results-driven
- Comfortable working in a dynamic and changing environment
- Excellent communication skills at all levels
Whats on Offer
- Competitive base salary
- Excellent uncapped commission structure
- Company car
- Health insurance
- Pension scheme
- Full IT package
- Expenses account
- Ongoing training and development
- Clear career progression opportunities
How to Apply:
If youre an experienced engineer ready to take the next step with a well-established company apply now. Alternatively, contact Pete at Holt Recruitment on 07485986178 / peter@holtautomotive.co.uk
....Read more...
Our client, A national renewable technology provider, is seeking Electrical Engineers to support the installation, maintenance and repair of solar PV systems.Our client works within the solar farm and automotive solar installation sector, and is looking for an experienced engineer as they expand in 2026.The ideal candidate will have strong technical knowledge and the ability to work independently on customer sites and large commercial and industrial installations.Key Responsibilities
Installation, maintenance and repair of solar PV systems in a commercial and industrial settingsEnsure installations meet regulatory and company quality requirementsIdentify issues and report non-conformitiesDeliver clear communication and excellent customer service
Skills & ExperienceEssential:
NVQ Level 3 in Electrical InstallationsIET 18th Edition Wiring RegulationsFull UK driving licence (max 6 points)Strong IT literacyExperience with commercial 3 phase systems
Desirable:
ECS card2391 Inspection & TestingLevel 3 EV Charger Installation qualificationHV experience
Benefits
Company/fleet vehicle or car allowanceCompany pension
Why Apply?A great opportunity to join a growing industry with long-term career prospects, progress to supervisory positions if you want it, and take advantage of ongoing training and exposure to cutting edge solar PV sites and technology. Acumen Recruitment Solutions are acting as an employment agency in relation to this vacancy....Read more...
An opportunity has arisen for a Senior Electronics Engineer to join an innovative and future thinking business based in Berkshire.
The successful Berkshire based Senior Electronics Engineer will work with a market-leading design team focused on developing innovative and robust electronic products. The role involves leading projects from initial concept through to final production, including schematic design, PCB layout, prototyping, testing, and customer support as products scale to volume production.
Key Responsibilities:
Lead electronic product development projects from concept to production.
Design innovative electronics and embedded firmware solutions.
Conduct automated and manual testing for electronics and software.
Act as the lead architect for assigned projects, collaborating with other engineers where needed.
Manufacture and test embedded components and harnesses for prototypes.
Participate in formal design reviews and follow an agile development methodology.
Ensure accurate documentation and maintain up-to-date project tracking (Jira, Atlassian).
Conduct EMC testing and compliance evaluations for various industry standards.
Skills and Experience:
A relevant degree or HNC/HND in Electronic Engineering, or significant proven experience in electronic product development.
Extensive industry experience in electronics design and embedded systems development.
Expertise in Altium Designer for schematic capture and PCB layout.
Ability to design and integrate digital and industrial communication buses such as SPI, I2C, UART, Ethernet, CANbus/LINbus.
Experience with task tracking tools like Jira and version control applications like Bitbucket.
Familiarity with EMC testing and certification requirements for automotive, aerospace, or medical applications is an advantage.
Experience in miniaturisation and high-density electronic designs.
APPLY NOW for the Senior Electronics Engineer position based in, Berkshire, by sending your CV and cover letter to bwiles@redlinegroup.Com or call Ben on 01582 878826 / 07471 181784.....Read more...
A fantastic new job opportunity for a Field Sales Engineer has just become available, to join a leading R&D company, based in Gloucester, but covering the south of the UK.
This presents an opportunity for an experienced sales professional to join world leaders in safety critical, lifesaving products. The Field Sales Engineer will work directly with customers, providing technical consultations, promoting solutions and assisting with the implementation of products for safety risk.
Travel is required for this role, with an expectation of up to 70%, including overnight stays. This individual manage the Southern region of the UK. A valid driver’s license is required, and the ability to rent and operate vehicles when travelling both nationally and internationally.
Key responsibilities for this job include:
Collaborating directly with customers (or via established channel partners) to understand their specific requirements and recommend solutions that align with their needs.
Providing virtual product demonstrations to ensure customers are informed about the functionality and benefits of the solutions.
Assisting customers in meeting safety and compliance requirements by recommending solutions that align with relevant industry standards.
Supporting customer centric initiatives by preparing accurate quotes, reviewing contracts for accuracy, and ensuring alignment between customer needs and solutions offered.
Key skills required for this job in Gloucester:
Experience in field based technical sales supplying industrial equipment or electro-mechanical biased products.
Strong communication and interpersonal skills, with the ability to clearly present technical information to both technical and non-technical audiences.
Proficiency in CRM systems and sales reporting tools.
Strong attention to detail, particularly in the preparation of customer site reports, accurate quotes and contract reviews.
A consultative approach to technical sales with a customer-focused mindset.
To apply for this fantastic opportunity for the Field Sales Engineer job based in Gloucester, please send your CV to Ricky on rwilcocks@redlinegroup.Com. For more information, please call 01582 878810....Read more...
We are seeking a skilled Field Service Engineer to join a busy, dynamic team supporting materials handling equipment. In this role, you will report to your local service manager and be responsible for ensuring all machinery both customer-owned and company-owned is fully operational.
You will diagnose faults, perform servicing, and carry out emergency repairs on a variety of equipment. Working independently on customer sites, you will need to communicate effectively with clients and colleagues while ensuring all service documentation is accurate and complete.
This is an excellent opportunity for someone with a technical background who enjoys problem-solving and delivering exceptional customer service.
Key Responsibilities
- Diagnose, service, and repair mechanical, electrical, and hydraulic systems on materials handling equipment.
- Perform emergency repairs on-site to minimise downtime for customers.
- Work safely and independently on customer sites, adhering to all health and safety regulations.
- Maintain accurate records of work carried out, including service reports and compliance documentation.
- Liaise professionally with customers and internal colleagues to ensure a smooth service experience.
Skills and Experience
- Technical background in materials handling equipment, industrial machinery, or similar.
- Proven experience and qualifications in a field service or maintenance role.
- Hands-on experience with mechanical, electrical, and hydraulic systems.
- Strong customer service skills and professional communication abilities.
- Motivated, proactive, and able to work independently while following safe working practices.
What We Offer
- Competitive salary and benefits package.
- Opportunity to work with a range of industry-leading equipment.
- Career development and training opportunities to enhance technical skills.
- Supportive and collaborative working environment.
If you are a motivated, skilled Field Service Engineer looking for your next challenge, we want to hear from you! Please contact Peter on 07485986178 or peter@holtautomotive.co.uk....Read more...
Principal Mechanical Design Engineer – Medical Devices – Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists. Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career. In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills. Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240. Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields.....Read more...
A Technical Support Engineer is sought to join an established engineering team in Dover, Kent, contributing to the delivery of technical support, troubleshooting, and application expertise across a range of electrical testing and measurement products.
The Technical Support Engineer, Dover, Kent, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include supporting low voltage instruments, electrical test equipment, battery systems, and rotating machines, as well as contributing to product development, training, and customer engagement activities.
Responsibilities include:
Provide expert technical support to customers and distributors via phone, email, and other communication channels.
Deliver on-site technical support and assistance when required.
Support pre- and post-sales activities, acting as a key technical point of contact.
Create technical content including application notes, competitor comparisons, and support materials.
Support product development activities, including testing during alpha, beta, and product launch phases.
Assist with regression testing and validation of new products.
Deliver technical demonstrations at trade shows, exhibitions, and industry events.
Maintain and manage demonstration equipment and departmental stock.
Input and maintain accurate records within CRM systems.
Complete departmental reporting, including visit reports, monthly updates, and expense submissions.
Support internal teams including sales, product management, and marketing with technical expertise.
Undertake additional duties such as testing services and workshop support as required.
Key skills & experience:
Strong understanding of electrical installations and testing procedures (e.G., BS7671, BS2391).
Hands-on experience as an electrician within commercial or industrial environments.
HNC/HND in Electrical Engineering or working towards a degree-level qualification.
Strong knowledge of electrical power systems and testing/measurement principles.
Proficiency with IT systems including MS Office and CRM platforms.
Strong communication and presentation skills with a customer-focused approach.
Ability to manage multiple priorities and work independently.
Full UK driving licence and willingness to travel within the UK and internationally.
How to apply:
Apply now for the Technical Support Engineer role in Dover, Kent. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc or BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
The Mechanical Manufacturing Engineer is responsible for complex electronic assemblies. Performing the lead role in implementing manufacturing processes and techniques using LEAN and Six Sigma tools.
Experience
Min BSc or BEng in Mechanical, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Responsibilities
Lean Six Sigma
Responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality
Responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues.....Read more...
A Field Service Engineer is sought to join a growing engineering team in Cork, Ireland, contributing to the installation, service, commissioning, and technical support of advanced electronics manufacturing equipment across customer sites.
The Field Service Engineer, Cork, Ireland, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices. This may include installation and commissioning of SMT equipment, fault diagnosis, preventative maintenance, calibration, and applications support within electronics manufacturing environments.
Responsibilities include:
Provide installation, service, repair, calibration, and preventative maintenance of equipment at customer sites.
Commission equipment at customer facilities and support final release into production environments.
Assess the suitability of equipment and processes prior to customer purchase where required.
Diagnose faults and resolve technical issues relating to equipment and production processes.
Provide technical expertise and support to customers and internal stakeholders.
Maintain accurate documentation and service records associated with installations, maintenance, and repairs.
Identify equipment and process-related issues that could impact successful installation, training, or commissioning.
Support customer training and applications assistance where required.
Attend meetings, conferences, trade shows, and technical training courses as necessary.
Ensure full compliance with company policies, procedures, and operational standards.
Key skills & experience:
Degree in Mechanical or Electrical Engineering, or equivalent industry experience.
Minimum of five years’ experience within electronic engineering or electronics manufacturing environments.
Experience installing, servicing, repairing, and maintaining industrial or manufacturing equipment.
Knowledge of SMT and electronics manufacturing processes such as printing, dispensing, pick-and-place, reflow, vapour phase, selective and wave soldering, coating, cleaning, testing, and inspection.
Ability to interpret electrical and mechanical engineering drawings.
Strong IT skills including knowledge of PC systems, networking, or SQL databases.
Strong practical mechanical and technical problem-solving abilities.
Highly organised, self-motivated, and able to work independently in field-based environments.
Full driving licence and willingness to travel across Ireland and occasionally the UK.
How to apply:
Apply now for the Field Service Engineer role in Cork, Ireland. Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821.....Read more...
Are you an experienced Principal Firmware Engineer ready to take ownership of firmware strategy and delivery for cutting-edge laser and photonics systems? This is a senior, high-impact role where you’ll lead firmware development for advanced embedded platforms supporting industries such as medical devices, life sciences, semiconductors, space, and quantum technologies.
This opportunity offers the chance to shape global firmware standards, drive innovation, and mentor teams while delivering robust, high-quality embedded solutions that meet customer and business objectives.
Key responsibilities of the Principal Firmware Engineer job based in Southampton:
Lead the research, development, testing, and maintenance of firmware for new and existing laser systems.
Drive the creation of firmware concepts, roadmaps, and strategic plans aligned with organisational goals.
Design, develop, test, and debug embedded firmware using C/C++ for complex hardware platforms.
Develop algorithms for measurement data processing and create interface and communication protocol code.
Implement and maintain build systems, automated testing, and continuous integration pipelines.
Ensure firmware meets design, quality, reliability, and cost-effectiveness standards.
Manage projects from concept and design through unit testing and handover to production.
Conduct code reviews and ensure documentation captures designs, tests, policies, and procedures.
Establish and maintain global best practice procedures across engineering teams and sites.
Act as a key subject matter expert and advisor to internal stakeholders.
Track deliverables, set priorities, and provide regular progress reports to senior leadership.
Drive continuous improvement across processes, products, and services within the firmware function.
Skills & knowledge required of the Principal Firmware Engineer job based in Southampton:
Expert-level proficiency in C/C++ and embedded firmware development.
Strong understanding of communication protocols networked and industrial interfaces.
Experience with automated testing, CI/CD pipelines, and build systems.
Knowledge of scripting languages and test automation frameworks.
Strong project management, time management, and organisational skills.
Ability to work collaboratively across engineering, R&D, product, and project teams.
Strong communication skills and the ability to operate effectively in a fast-changing, high-growth environment.
Innovative mindset with a strong customer and quality focus.
Degree in Computer Engineering, Electrical Engineering, or a related discipline.
Proven experience setting up and leading a firmware function.
Strong background in system design, planning, and delivering complex engineering projects.
Experience in the photonics industry and within fast-paced, growing environments.
If this Principal Firmware Engineer job based in Southampton could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 to discuss in more detail.
....Read more...
Flexi-Time, 33 Holidays, Frequent Work Events/Socials and State-Of-The-Art-Facilities and an attractive pension contribution are just a few of the benefits that the Product Quality Engineer will enjoy whilst working with this impressive engineering organisation.Established over 100 years ago, this highly impressive engineering organisation has become a vital partner to their high profile clientele. Operating out of a state-of-the-art manufacturing facility, they currently employ over 120 people and produce bespoke high-end products for use in a variety of industries and types of facilities.This employer is based in LEEDS, meaning that the successful Product Quality Engineer will easily be able to commute from surrounding towns and cities including Bradford, Dewsbury, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Bingley and Keighley.Key Responsibilities of the Product Quality Engineer will include:
Develop, implement and maintain in process quality control plans and ISO 9001 aligned procedures across all major transformer manufacturing stages, ensuring full compliance with customer specifications.
Conduct inspections, tests and audits to detect non conformities early, driving timely corrective actions and maintaining robust product quality standards.
Lead structured root cause analysis using 8D, Ishikawa, MSA, SPC and FMEA, ensuring the identification of systemic issues and validation of long term corrective actions.
Collaborate with Production, Engineering and Supply Chain to resolve quality issues, improve process capability, reduce scrap/rework and support qualification of new materials and processes.
Analyse engineering drawings, technical data and quality KPIs to identify trends, guide improvements and contribute to lean manufacturing and continuous improvement initiatives.
Support Factory Acceptance Testing (FAT), maintain all quality documentation, ensure full material traceability and assist with customer audits, third party inspections and certification activities.
Work with Design Engineering on manufacturability, provide quality training to production teams, and support supplier investigations and improvements to ensure consistent material and component conformity.
For the Product Quality Engineer, we are keen to receive applications from individuals who possess:
Apprenticeship, HND, Degree or equivalent technical background in Electrical, Mechanical, Industrial Engineering or a related manufacturing discipline.
3–5 years’ quality engineering experience within mechanical/electrical manufacturing
Solid working knowledge of ISO 9001 and practical experience with quality management systems.
Proficient in structured problem solving tools such as FMEA, 8D, SPC, MSA and root cause analysis.
Strong analytical ability with proven experience interpreting engineering drawings and technical specifications.
Salary and benefits:
Up to £45,000 (depending on experience)
Flexible working hours (37.5 Hours per week)
4-Hour minimum day (2hrsxAM & 2xhrsPM)
Monday to Thursday – 08:15am to 17:00pm
Friday - 08:15am to 12:45pm
33 days Annual Leave including Bank Holidays
10% Combined Pension
To apply for the Product Quality Engineer role, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information.....Read more...
Power Electronics Engineer — Medium Power (100 W–10 kW)
Clevedon, Somerset
Our client is seeking an experienced Power Electronics Engineer to join their engineering team, contributing to the design and development of advanced medium-power electronic systems.
This role offers hands-on involvement across the full product lifecycle, working on power conversion, control electronics, and embedded systems typically in the 100 W–10 kW range.
You will work closely with multidisciplinary teams to deliver robust, production-ready designs for modern electrical and industrial applications.
Key Responsibilities:
Design and develop medium-power electronics (100 W–10 kW) including:
Power conversion stages
Analog and digital control circuitry
Signal conditioning and feedback systems
Produce high-quality schematic designs, component selection, and multi-layer PCB layouts.
Perform simulation, prototyping, debugging, and verification testing.
Support new product introduction from concept through production.
Collaborate with test, manufacturing, and service teams to ensure reliable and manufacturable designs.
Contribute to continuous improvement of design processes and product performance.
Ensure compliance with ISO9001, ISO14001, EMC requirements, and relevant safety standards.
Qualifications & Experience
Degree in Power Electronics, Electronics Engineering, Embedded Systems, or equivalent.
Strong background in hardware and power electronics design, including: Analog and digital circuit design, Power supply and converter design, High-quality PCB layout (OrCad preferred)
You can be experienced from 1 year all the way through to Senior level.
This position offers a rare balance between hands-on power electronics design, analog engineering, and real-world medium-power systems, making it ideal for engineers who enjoy working across both control electronics and power hardware.
Please send your CV to ndrain@redlinegroup.Com Or call 01582878828 to speak with Nick Drain for more information.....Read more...
Join a Leading UK Supplier of Specialist Vehicles & Heavy Equipment. We are seeking a skilled Mobile Service Engineer / HGV Technician / Plant Fitter to support customers across the region.This is an excellent opportunity for an engineer experienced with HGVs, plant machinery, heavy equipment, terminal tractors, or airport GSE.Location: Multi Location, UK Wide Salary: Up to £44,000 basic + overtime (x1.5) Hours: Monday–Friday, 8am–6pm, NO weekends Benefits: Company van & fuel card, pension, technical training, wellness programme and more.The Role – Mobile HGV Technician You will carry out a wide range of servicing, inspections, fault-finding, diagnostics and repairs on:
Distribution Tractors
Ro-Ro Tractors
Terminal / Yard Tugs
Airport Ground Support Equipment
Other specialist heavy vehicles
Key Responsibilities of the Mobile HGV Technician:
Diagnose mechanical, electrical, hydraulic and pneumatic issues.
Conduct detailed safety inspections and produce accurate reports.
Use diagnostic systems, technical manuals and test equipment to identify faults.
Complete all work to manufacturer standards and in line with safety procedures.
Liaise with customers and obtain sign-off for completed work.
Work independently, managing your own time and workload.
Occasional out-of-hours or stay-away work may be required.
What We’re Looking For Essential skills & experience for the Mobile HGV Technician:
City & Guilds Level 3 (or equivalent) in Vehicle Mechanical & Electronic Systems, HGV/Plant Maintenance or similar.
Strong experience with auto-electrical diagnostics and use of diagnostic tools.
Background in HGVs, plant equipment, specialist vehicles, or heavy machinery.
Ability to interpret technical information and follow safety procedures.
Good communication skills and a customer-focused approach.
Full UK driving licence.
Desirable (not essential):
Experience with terminal tractors/yard tugs.
Knowledge of hydraulics, pneumatics or CANbus systems.
Experience working in ports, airports or industrial sectors.
What’s on Offer
Starting salary up to £44,000
Overtime paid at x1.5
Company van + fuel card
Laptop & mobile phone
Company pension
Cycle-to-work scheme
Wellness programme
Free or subsidised travel
Ongoing technical training and professional development
If you’re an experienced HGV Technician, Mobile Engineer, Plant Fitter, Heavy Vehicle Technician or GSE Engineer, this is a fantastic opportunity to join a respected organisation offering long-term security and development.Apply Now for the Mobile HGV Technician position or contact Sophie Ranson at E3 Recruitment....Read more...
Job Description:
Job Title: Multi-Skilled Maintenance EngineerLocation: Low Moor, BradfordWorking Hours: Monday to Friday, 8:00 AM to 5:00 PM (overtime available)Job Description:We are looking for a genuinely multi-skilled Maintenance Engineer to join our clients team in Low Moor, Bradford. This is a diverse, hands-on role in a fast-paced manufacturing environment where you'll be expected to work across both mechanical and electrical systems.You’ll be responsible for carrying out a wide range of planned and reactive maintenance tasks, supporting continuous production, and ensuring the safe and efficient operation of all plant equipment.Key Responsibilities:Mechanical & Electrical Maintenance:
Maintain and repair mechanical systems: belts, chains, bearings, pipework, pumps, valves, and filters.Work on pneumatic and hydraulic systems including solenoids, actuators, rams, and compressors.Fault-find and repair basic electrical issues, including sensors, switches, fuses, relays, and overloads.Carry out safe isolation of electrical equipment and support minor electrical installations or modifications.Understand and work with steam systems, boilers, control valves, and water softening equipment.Diagnose and resolve faults in automated and computer-controlled machinery.Support continuous improvement and preventative maintenance initiatives.
Essential Skills & Experience:
Demonstrable experience in a similar multi-skilled maintenance role within manufacturing or industrial environments.Strong mechanical and electrical fault-finding abilities.17th / 18th Edition qualifiedConfident working safely with 3-phase systems, basic control panels, and low-voltage equipment.Skilled in using diagnostic tools and interpreting technical documentation.Comfortable working across a wide range of systems from pneumatics and hydraulics to electrical controls.
Desirable Skills & Experience:
Familiarity with PLC-controlled equipment (understanding inputs/outputs, basic diagnostics).Experience with steam and compressed air systems.Experience with continuous improvement or lean manufacturing practices.
Personal Attributes:
Versatile, hands-on, and proactive.Strong communication and problem-solving skills.Able to work independently and collaboratively in a team.Reliable, detail-oriented, and safety-conscious.
If you're a capable and well-rounded Multi-Skilled Engineer looking to bring your talents to a forward-thinking team, we’d love to hear from you
....Read more...
Electrical Maintenance Engineer – Plastics ManufacturingLocation: Huddersfield Salary: £45,000 – £50,000 per annum Shifts: 4 on / 4 off (Days & Nights) Industry: Plastics / Polymer Processing
The OpportunityWe are recruiting for an Electrical Maintenance Engineer to join a leading plastics manufacturing business based in Huddersfield. Operating on a 4 on / 4 off rotating shift pattern, you’ll be responsible for maintaining and improving a range of automated and electrically driven equipment used in extrusion, injection moulding, and material handling operations.This is a hands-on role within a highly automated environment, offering long-term stability, technical challenge, and opportunities to develop with a forward-thinking engineering team.
Key Responsibilities
Perform planned preventive maintenance (PPM) and reactive breakdown repairs across electrical systems and automated machinery.Fault-find and repair on PLC-controlled equipment, drives, motors, sensors, and temperature control systems.Maintain and calibrate equipment associated with extruders, injection moulding machines, conveyors, and blending systems.Diagnose faults using electrical drawings, schematics, and diagnostic tools.Support installation and commissioning of new machinery and production lines.Ensure all work complies with site safety procedures and electrical regulations (17th/18th Edition).Collaborate with mechanical engineers and production teams to drive root cause analysis and continuous improvement initiatives.
About You
Time-served or qualified Electrical Engineer (NVQ Level 3 / HNC / ONC or equivalent).Strong background in industrial or plastics manufacturing maintenance.Proven ability to fault-find on PLC systems (Siemens / Allen Bradley preferred).Experience with AC/DC drives, servo systems, and control panels.Knowledge of thermoforming, extrusion, or injection moulding machinery advantageous.Excellent analytical and problem-solving skills with a proactive approach.Comfortable working on a 4 on / 4 off shift pattern (days & nights).
What’s on Offer
Competitive salary: £45,000 – £50,000 DOE.4 on / 4 off rotating shift pattern for a balanced work schedule.Overtime and training opportunities.Supportive, safety-focused environment with ongoing investment in automation and equipment.Genuine career progression within a stable, growing plastics manufacturer.
If you’re an electrically biased engineer with solid experience in plastics processing or heavy automation, this is an excellent opportunity to join a modern, well-equipped facility with real technical variety.....Read more...
Production & Process Engineer
Location:Exeter, Devon, UK (On-site)
An opportunity has arisen for a Production & Process Engineer to join a specialist engineering and manufacturing organisation delivering high-performance mechanical systems for defence and specialist industrial applications.
The Exeter based organisation has a long-standing heritage in the design, development and manufacture of complex engineered products, supporting both domestic and international customers across defence and commercial markets. With a strong in-house capability spanning design, fabrication, assembly and testing, the business operates across both proprietary product lines and third-party engineering programmes.
The company has experienced continued growth driven by new product development and defence-related programmes, and is investing in its engineering and manufacturing capability to support future demand.
This role sits at the intersection of design engineering and manufacturing, focused on improving production processes, supporting new product introduction and driving continuous improvement across both internal operations and the wider supply chain.
This position is suited to a hands-on mechanical or production engineer with strong CAD capability and a solid understanding of manufacturing processes, looking to work within a collaborative, workshop-integrated engineering environment.
Main Responsibilities of the Production & Process Engineer (Exeter, Devon, UK):
Design and develop 3D models and detailed engineering drawings using CAD software (SolidWorks or similar)
Create clear and effective production documentation to support manufacturing operations
Review and improve production engineering drawings, implementing design and process enhancements
Support engineering change control processes, including drawing release and revision management
Develop and implement standard operating procedures and work instructions to reduce manufacturing variability
Identify and implement continuous improvement initiatives to increase efficiency and reduce waste
Support new product introduction by defining manufacturing requirements and build processes
Investigate production and process issues, providing technical solutions and support
Create and manage production Bills of Materials (BOMs) and support virtual build reviews
Work closely with engineering, operations, suppliers and customers to resolve technical queries
Source and evaluate components in collaboration with suppliers
Perform basic structural analysis and support simulation activities where required
Support design reviews and incorporate feedback into engineering solutions
Implement production performance metrics and contribute to process optimisation initiatives
Requirements of the Production & Process Engineer (Devon, UK):
HNC, HND or Degree in Mechanical Engineering, Automotive Engineering or a related discipline
Proven experience in an engineering design or production engineering role
Strong 3D CAD skills (SolidWorks preferred) with the ability to produce detailed models and drawings
Experience working within a manufacturing, workshop or production environment
Understanding of engineering drawing control and PDM systems
Knowledge of manufacturing processes including machining, fabrication and assembly
Ability to perform basic engineering calculations and support analysis activities
Strong communication skills with the ability to work cross-functionally with internal teams and suppliers
Good report writing and documentation skills
Strong organisational skills with the ability to manage multiple tasks and meet deadlines
Proactive, hands-on approach with a focus on quality and continuous improvement
Desirable Experience:
Experience with FEA tools (e.G. ANSYS)
Exposure to vehicle systems or mechanical assemblies
Experience with production testing, data logging or instrumentation
Understanding of supply chain and manufacturing process optimisation
Working Pattern & Benefits:
Full-time, on-site role based in Devon, UK
Collaborative engineering environment with close interaction between design and manufacturing teams
Opportunity to work on complex, high-performance engineered products
Involvement in full product lifecycle from concept through to production
Supportive team environment with opportunities for professional development
To apply for this Production & Process Engineer role, please send your CV to Nicola King:
Nking@redlinegroup.Com
01582 878 839....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
The Manufacturing Engineer is responsible for complex electronic assemblies. Perform the lead role in the implementation of LEAN manufacturing processes and use of Six Sigma tools.
You will become an expert in the manufacturing processes, train shop floor personnel and monitor key metrics. Also solve complex manufacturing problems and take an active role in troubleshooting quality and production yield related issues within manufacturing.
Key skills
Min BSc or BEng in Electrical, Electronic, Industrial Engineering (or similar)
Manufacturing especially Electronic assembly
Lean and Six Sigma
Production Workflow
Non-Conformance Management
Technical Investigation Support
Production Test and Assembly
Manufacturing Resource Planning System
Role responsibilities
Lean Six Sigma, responsible for the implementation of key elements of Lean, such as: standardized work instructions, line balancing, layout and work sequence (routing) optimization, training development matrix, Value Stream Mapping, Kaizen/5S workouts, pull processes, TPM (total preventive maintenance), cell design, and quick changeover/batch-size optimization.
Processes
Implement process improvements to achieve manufacturing excellence in areas such as process yield (e.g. First Pass Yield, Rolled Throughput Yield), cycle time reduction and productivity.
Provide shop floor feedback on product design and manufacturability issues to Engineering and DFMs (e.g. through the use of Engineering Change Requests - ECRs).
Review and sign-off on Engineering Change Orders that impact Inventory - including product life cycle issues, obsolescence, etc.
Creates, implements, and monitors key performance indicators and metrics on manufacturing process capability and product quality.
Monitoring and reducing process costs.
Quality, responsible to assist with investigation, root cause analysis and corrective action implementation for manufacturing quality issues. ....Read more...
